Search Results

Search found 12829 results on 514 pages for 'hard'.

Page 72/514 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• HDDs randomly falling off raid

  - by michael

  I really need help on this it's Saturday long weekend.No customer service help:( .I recently build new server/light duty desktop.Main purpose is only file sharing.Raid configuration :Adaptec 6805 ,8x 3TB HDD WD Red,Intel RES2SV240 expander,Raid 6,set in Intel mobo DZ 77GA-70K.I upgraded firmwares, but I'm having strange problem. During Build Verify segment 7 got missing.I just reinsert drive into hot swap bay and it started to rebuild Array.After rebuild was done another segments 0 and 5 gone missing while build/verify.I reinserted drives and now I'm praying that raid is going to rebuild successfully from remaining 6 drives,because i already transfer some data on it(I know it was bad idea).I checked S.M.A.R.T on missing drives , it only says link failure and aborted commands on one of them.No Errors on HDDs.Connections and cables are good.I added 2 fans blowing on RAID controller because it was getting too hot, so I guess overheating shouldn't be issue.What can be possibly wrong? Thank you for help.

  Read the article

• Ubuntu 9.04 :: Cannot mount Windows partitions (or hard drives)

  - by Pajarito

  This is a known Ubuntu error in Jaunty. The only thing is that the bug fix was in Geek, not English. Could someone explain the fix to me? Here it is: https://bugs.launchpad.net/ubuntu/+source/ntfs-3g/+bug/300443 - comment #4

  Read the article

• Replacing Failing RAID 1 Drive

  - by mrduclaw

  I hope this is a simple question, but I simply don't know anything about RAID. Some time ago I received a machine that, as I understand it, has two drives in it under RAID 1 (or so that one drive is mirrored on the other and appears as just 1 drive to the OS). Recently, one of these drives has started marking a clicking noise and I would like to replace it. I believe the machine has a hardware RAID controller on the motherboard that handles the RAID stuff, but if it matters the Operating System is Windows XP 32-bit. Is the solution to my problem as simple as buying another drive that is of the same capacity and plugging it in where the clicking drive is currently? Or could I possibly lose everything if the drive that's clicking is the one being mirrored on to the other drive? Is there some menu I need to find before unhooking things? Any best practices out there? I'm sure I'm leaving out some required information, so please just tell me what I'm missing. Thanks!

  Read the article

• Windows XP drives not opening

  - by SpiXel

  I had a PC which operating system was Windows XP , I reinstalled the Windows , formatting just the C drive , and had my new version of XP installed there , but when it was installed and I tried to open the other drives (meaning for example D , E , .. ) I got this error : i9wjpqc.exe has encountered a problem and needs to close I trying googling it , and I ended up with knowing it's a malware, so my guess is that my previous OS had this malware on its other drives and the source was located in C , now that I've formatted C , other drives still have the malware, so they can't be opened :( and suggestion to get the drives to open ?

  Read the article

• Can I mix drive types in an HP server?

  - by Generic Error

  I currently have the following setup: HP DL380 G4 Server 6 x 73GB, Ultra160, 10k, SCSI 80 Pin Drives Smart Array 6i Controller RAID 5 One of the drives is failing and needs to be replaced. I have on hand drives that are the same size and type, but are Ultra320, 15k instead. I have verified that these drives work in another system with the same type of drive controller. When I plug one of these in the system simply reports the drive as being offline and has nothing further to do with it. From what I have read these drives should be compatable. Should this work at all and if so, what might be preventing it?

  Read the article

• Symlink to /Documents /Pictures etc. in OS X Home Directory?

  - by Larry O'Brien

  I have just purchased a 120GB SSD with the intent of making it my boot drive. I'd like to keep it as lean as possible since, y'know, it's so small (Heaven help me). I've read Can I move my home folder in Mac OS X? and Moving Mac OS X user folders? which discourage moving the entire home dir to a data drive. Is it possible and less-dangerous to leave the home directory on the boot drive but move the big data directories to a slower drive and symlink to them? I have the same thoughts with the /Applications directory, but maybe I should make that a separate question?

  Read the article

• Extensive use of HDD after VmWare Player virtual machine is closed.

  - by Bobrovsky

  Each time I close virtual machine in VmWare Player I see extensive use of HDD in my system. Basically, whole system becomes unresponsive for about 5-7 minutes. Host system is Windows 7 Utimate x64 SP1 with 6 GB of memory, i3-M350 processor. Virtual machine is Windows XP SP3 x86 (2GB of memory allocated for VM). What can be the cause and what can I do to solve the issue? UPDATE: I am not shutting down the VM, I just close Player window and VM saves it's state. System becomes unresponsive right after VM have saved it state (as indicated by Player) and Player itself have closed.

  Read the article

• Is my external hard drive dying?

  - by thatotherguy

  I keep getting this error lately when I try to copy large (200+ MB) files over to my external. Following this, the disk becomes unresponsive and I got to unplug it and plug it in again to work. The copy process also is unreasonably slow. It is worth noting that this happens on Windows too, so it's not the notorious "Error -36" bug OS X had prior to 10.6.3. The disk is a Western Digital 3200BMV. Any ideas?

  Read the article

• Setting thresholds via smartd.conf

  - by JPerkSter

  Hello! We currently use smartd to monitor SMART health on our disks. I would like to set the 'thresholds' that smartd uses to report. For example: 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 9 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 9 I would like to be able to set a threshold for these two attributes to only report if they are above 10. I haven't been able to find a way to set this via smartd.conf, and I'm also not looking to actually shutdown the daemon. Has anyone ever tried this, or know how I might be able to accomplish this better then throwing a script into cron.hourly?

  Read the article

• Three disk (possibly RAID) data recovery

  - by Martin

  I have on my desk three 160 GB disks that were once part of an HP Proliant Windows 2003 Server. They may have been part of a RAID configuration of some sort. They may or may not be damaged in some way. When I interface them via USB, one of them shows up as a drive, but unformatted. The others show up as uninitialized disks in manager. An alternative explanation is that the two drives were simply not unused. What's my first step? I've recovered data off damaged drives before but never had anything to do with RAID configs. How can I even tell if any type of RAID was used?

  Read the article

• What Filesystem should be used for a 4TB drive for both Windows and OSX compatibility? [closed]

  - by Nicholas Yost

  Note: I am aware of similar questions. The one's I seen here are for Windows, OSX, and Linux (which I do not need). I also can use Mountain Lion, which the other questions did not mention. I was going to use NTFS, but OSX Mountain Lion can only read that filesystem and not write to it for some reason. I want to use something native between OSX and Windows, as I don't want to risk losing the data over filesystem incompatibilities. I have USB 3.0 and want something that will allow files greater than 4GB. I do not mind installing a small set of drivers on the Windows machine(s), but I would strongly prefer to leave the Mac machine untouched. Thanks!

  Read the article

• How do I backup (from Vista Home Premium) to a FAT32 HDD connected to a wireless router with no user account or password set?

  - by Scubadooper

  I have a Seagate expansion 2TB HDD which I've managed to get working on my wireless router (thanks to fat32format) however I haven't managed to set my backup to work with it. Vist Home Premium requires that I input a username and password in the backup utility. As far as I'm aware that type of access control isn't set on the HDD: Can I set up the access control on the HDD? If so how Or, can I set the backup to work without it? If so how Thanks for your help, I haven't been able to find the answer anywhere on the net so far

  Read the article

• My new Xbox 360 drive doesn't show up

  - by RobbieGee

  I bought an Xbox 360 Arcade version a while ago and today I got a 120GB drive from a shop that had a closedown sale. I put the drive on the side as per the picture on the back side of the drive. When I go to settings and look at memory, it only finds the built in memory chip, not the harddrive. Am I doing it correct? I have almost never used my Xbox so I'm not sure if there's anything more to it. I don't think I fitted the drive wrong either, it seems pretty much impossible to do it wrong. The box came with only the drive, it doesn't have any transfer kit or the likes.

  Read the article

• Can I recover a non-system disk deleted during 2008 R2 setup?

  - by serialhobbyist

  I've done a truly stupid thing and 'deleted' the data disk on a Server 2008 R2 box. Can I recover it? If so, how? I was rebuilding the box because a motherboard change had broken things. I've built loads of boxes and was going through the standard stuff without much concentration. I got to the disk screen which normally displays the two paritions on the drive: the recovery one and the system one. As normal, I deleted the two things I saw. It was only when two lots of unallocated space didn't merge into one that the full horror of what I'd done hit me. Yes, I've got backups... of the stuff I have space to back up. The real irony is that, earlier in the day, I'd ordered to 1 TB disks to deal with the problem. So, anyway, I'd really like to get this partition back because it'll save me a lot of time. How can I do it?

  Read the article

• Hot-swapping drives

  - by user57770

  I have hot swap drives and controllers, but have never actually used the hot swap capability. What is the procedure for doing so? Do I need to warn Linux that I'm about to pull a drive out? Should I do anything after I put a drive back in? Does it make a difference whether the drive is part of a RAID set? The drives are generally RAIDed, but not always. Any RAID sets are managed by Linux, rather than the controller. The machines are running Fedora and CentOS.

  Read the article

• mdadm: Replacing array with entirely new drives

  - by hellfur

  I have a server with three 500GB drives, with most of my data in a RAID5 configuration spanning the three of them. I just purchased and installed four 1TB drives, and the intention is to move off of the old drives and onto the new ones. I have enough SATA ports and power connectors to power all seven of my drives at once, so I've kept the old RAID running while I figure out what to do with the new drives. My question is: Should I create a whole new array on the 1TB drives, then move everything over and reconfigure linux to boot from the new md arrays? Or should I just expand the array, swapping out each of the three 500GBs with the 1TB, then adding the final drive? I've read up on the mdadm extending drive setup, and it makes sense, but I imagine I would use one of the drives as a full backup while I move things over, then add that drive back into the array once things are up and running on three of the 1TB drives, so there's some complication in going that route as well... I'm just not sure which is safer/recommended.

  Read the article

• Tool to test HDD for health?

  - by Ognjen

  I've had my HDD replaced, and now my computer is freezing every 1 to 5 minutes for 5 to 10 seconds. Actually, only active applications freeze (but it can be ANY application), usually when I click something, but sometimes by themselves. How can I check if this is HDD issue or software issue? I don't want to send my laptop for second HDD replacement right away, since the last service took 40 days, so I am looking for a tool that could confirm that this is a HDD issue.

  Read the article

• Have two partitions in RAID1

  - by mateikav

  The answers are unclear wherever I look. I have two 2TB drives for a RAID1 and I want to mirror them while having two partitions on the drives. One partition will be 100GB and contain programs, the other partition will be 1.8TB and contain personal files. Some may ask why? The answer is that my programs are currently on another older drive and I want to save time and pain uninstalling and re-installing critical programs while merely copying them to the new drives via Shadowcopy. When I create the RAID1, will both partitions be mirrored? Is this possible? I am sorry if I am being confusing or unclear.

  Read the article

• Matched or unmatched drives for RAID arrays?

  - by Will

  Looking around there is conflciting information on this, with some strongly suggesting one or the other. From my understanding the issue with matched drives is that the wear on both drives is more or less the same, so the potential for the second drive failing with or very soon after the first is pretty high. People also claim matched drives give substianatally higher performance however assuming the unmatched drives are more or less the same (eg 2, 1 TB STATA II 7200rpm drives with 32MB cache), would the minor differences between say a Seagate and a Western Digital one (say one has a 128MB/s read rate, and the other a 150MB/s read rate, as well as I guess various other minor differences) actually cause any notable performance loss, ie potentialy worse than two matched 128MB/s drives, or does RAID not really care and give you essentially an optimal solution (eg upto 278MB/s total read speed for RAID 0 and 1) and similar for other RAID with more "unmatched" drives (5 and 1+0 come to mind as possibilities)? Also I couldnt find much info on how this is different on different RAID setups, eg RAID 0 or RAID 1, software or hardware RAID, etc. I'm assuming such things have an effect, and thats it's not all the same for RAID in general?

  Read the article

• Truecrypt rescue usb

  - by geekbutitsokk

  i have found tutorials on their official forum and on the internet about how to make a truecrypt rescue bootable usb stick. I'm guessing anyone who can answer will know what that is already, but it is basically just a way to boot into the system using a usb stick instead of a DVD. But the only problem is all of these tutorials involve using Grub4Dos, and i cannot run Grub4Dos on 64 bit windows 7. Is there any other alternative method? Thanks!

  Read the article

• What is the best SSD deal available right now ?

  - by paulgreg

  What is the best 2.5" SSD deal (best performance for a reasonable price and a good size) available right now ? The question is in 'community wiki' mode, so feel free to post the "winner" below : And the winner is... : currently the OCZ Vertex. Prices: * 30GB - $149.99 * 60GB - $239.99 * 120GB - $389.00 * 250GB - $829.00 Speed: * Read: up to 270MBps * Write: up to 210MBps

  Read the article

• I want to reformat my external hard disk but disk utility said it could not be unmounted

  - by Faith

  Hi I wanted to reformat my HP 500GB hard disk to MS DOS (FAT) by using Disk Utility but Disk Utility kept saying that the hard disk cannot be unmounted. I tried googling it but nothing seems to answer my question. I'm not trying to reformat the hard disk in my Mac but my external hard disk! I usually format my hard disks to clear the documents I no longer need. And I'll change it to ExFat but currently, whenever I plug in my hard disk on Windows, the whole system just hangs there. Can someone help??

  Read the article

• Computer won't start when connecting SATA HDD

  - by vlad

  I just bough a new HDD some time ago and recently i bought another SATA cable to have both HDDs connected at the same time, to transfer all the files from the older one to the newer. When i connected both of them, the computer started working, i tapped F2 to go to bios to make sure it was detected, and then after 5-10 seconds the computer instantly shut down. After this incident, my computer won't start at all when connecting the SATA power supply to the old HDD. If i connect only my new drive, it works without any problem. If i connect only my old drive, or both the old drive and the new one, and then push on the power button, the cpu fan simply rotates about 5 degrees and then stops.. and that's it, the computer doesn't start, and no sound from the pc speaker either. Is there any way to recover my files from the old HDD and transfer them to my new one? I do not want to use the old HDD any more, i only need to save all my files.

  Read the article

• Disk (EXT4) suddenly empty without any sign of why

  - by Ohnomydisk

  I have a Ubuntu 10.04 server with several disks in it. The disks are setup with a union filesystem, which presents them all as one logical /home. A few days ago, one of the disks appears to have suddenly 'become empty', for lack of better explanation. The amount of data on the /home mount almost halved within minutes - the disk appears to have had just over 400 GB of data prior to 'becoming empty'. I have absolutely no idea what happened. I was not using the server at the other time, but there are half a dozen other users who may have been (without root access and without the ability to hose a whole disk). I've ran SMART tests on the disk and it comes back clean. The filesystem checks fine (it has 12 GB used now, as some user software continued downloading after the incident). All I know is that around around midnight on October 19, the disk usage changed dramatically: The data points are every 15 minutes, and the full loss occured between captures: 2012-10-18 23:58:03.399647 - has 953.97/2059.07 GB [46.33 percent] 2012-10-19 00:13:15.909010 - has 515.18/2059.07 GB [25.02 percent] Other than that, I have not much to go off :-( I know that: There's nothing interesting in log files at that time Nobody appeared to be logged in via SSH at the time it occured (most users do not even use SSH) The server was online through whatever occured (3 months uptime) None of the other disks were affected and everything else on the server looks completely normal I have tried using "extundelete" on the disk and it didn't really find anything (some temporary files, but they looked new anyway) I am completely at a loss to what could have caused this. I was initially thinking maybe root escalation exploit, but even if someone did maliciously "rm" the disk contents, it would take more than 15 minutes for 400 GB?

  Read the article

• Reading S.M.A.R.T. statistics on an ESXi?

  - by leeand00

  Is it possible to read S.M.A.R.T. statistics on harddrive in an VMWare ESXi? When I did a backup last night I received an error message that didn't really seem to indicate if the error came from the local drive I was backing up to, or the remote ESXi Virtual Machine's E:\ drive I was backing up from caused the error. When this happened I ran chkdsk on the local drive and on the remote virtual drive. It seems like it worked, I'm no longer getting the error, but if it is something serious, I'd like to know about it before the drive fails. I've already hooked up the backup drive to my system so I can read the the S.M.A.R.T. statistics, but I have no idea how one could do this on a ESXi.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >