Search Results

Search found 4690 results on 188 pages for 'ran'.

Page 72/188 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Configure redis to not have everything in memory?

  - by acidzombie24

  I like redis because it lets me do operations on data structures. I wanted to see what would happen if i were to put more data into redis then i have for ram. So i wrote a loop that inserted 30k bytes repeatedly and set maxmemory 100MB. I figure it would stay at 100mb. It kept growing. Past 1gb then past 2gb. Suddenly it crashed because i ran the 32bit version. Now... i dont understand what the point of maxmemory is? I am using the windows version so maybe its ignored. Does redis have to have everything in memory? If i have a site (on linux) with a 10gb database and 512mb on the machine will redis work? I don't need it to be amazingly fast i just prefer to modify data in it then sql (although i hope it is still faster then mysql)

  Read the article

• Is PCI Express x4 faster or slower than a standard PCI slot for graphic cards?

  - by Stephen R

  I am looking at potential motherboards for a computer I want to build and ran into this conundrum. The motherboard has two PCI Express slots that allow for 16 channel cards to fit in them. The catch is only one of them operates at 16 channels, the other operates only 4 channels. My question is, would it be faster to buy a PCI Express graphic card and install it in the 4 channel PCI Express slot? Or would it be better to buy a standard PCI graphic card and install it in one of the available PCI slots?

  Read the article

• Recover Bios HP DV9700T windows 7 64

  - by petebob796

  I downloaded the latest DV9700t bios (.59) and ran the update tool in windows 7 64. This seemed to go ok and did the usual system will shutdown in 10 seconds dialog. Updon the reboot nothing happens I get no BIOS screen or anything so I think the bios update went wrong. Which I am annoyed about I have never known a bios update to fail before and lots of people on the internet seem to have had the same problem with the same model. There is a way to recover apparently using crisdisk utility and creating a bootable usb key then holding win+b at power on, unfortunately the utility to make the disk doesn't seem to work in 64 bit versions of windows, the only type I have easy access to. Anyone know a way to create the boot disk in 64?

  Read the article

• windows 7 haning and after shut down it does not start

  - by ads

  My windows 7 samsung i5 second gen laptop started hanging all of a sudden. I recovered it to factory image, it ran fine for 1 day then again started hanging. When i shut it down, i didnt start, it showed the msg bootmgr missing, then i used my samsung recovery cd and installed windows 7 home. When again i shut it down it didnt bootup. Just a blank screen. System repair is also not able to repair. Then i installed windows 7 ultimate. Aftr shutting it down it again ahowed the blank screen.. cant think of any other option, I am in a fix. Could anyone tell me what to so. Machine is just one yr old.

  Read the article

• Tests for hard drive health

  - by Samik R

  I have a 5-year old hard drive (bought new at the time), but it was sitting in my closet for 5 years, unused. I have just started using it, and seems to be getting a whirring sound (rather distinct from the other noises like fans etc.). I ran a few diagnostics tests, like Seagate's SeaTools, and the SMART test, and a few generic tests and all passed. Should I be concerned? Is there any other test that I should run? It's an internal IDE WD 5400RPM drive. Being used for a desktop, which is itself pretty high-end (AMD Phenom II X6 1100T, AMD Radeon GPU etc.), but would be used rather occasionally to begin with (avg. 1-2 hrs. per day). Thanks for any pointers.

  Read the article

• Macbook Pro - Disk Locked HD needs repair, can't reinstall OSX

  - by Rob

  I basically have the same problem. A friends HD was acting badly. Ran Disk Repair Util many times. Says disk needs repair but it won't repair it. I re formatted and installed 10.8 but that hasn't fixed it. Ive tried partitioning it and that won't work. Now I'm trying to get system 10.8 to reinstall and it says the disk is locked. Your fix requires Terminal, is that right? How do I open terminal to run your fix? Please help if you can. Disk Warrior couldn't fix it. I think the disk is bad. What do you think?

  Read the article

• Windows 8 - uninstall AppFabric?

  - by downatone

  I recently upgraded from Win 7 - Win 8. AppFabric was not one of the programs that came up as being incompatible when I ran the upgrade wizard, so I did not uninstall it. Now whenever I goto "Add or remove features" I get the following error: --------------------------- Windows Server AppFabric Setup Wizard --------------------------- Windows Server AppFabric is not supported on current operating system Windows 8 Pro(version 6.2.9200.0). Please refer to installation guide for the list of supported operating systems. --------------------------- OK --------------------------- Unfortunately the only way to uninstall AppFabric is via the "Add or remove features" - does anyone know a commandline command to kick the uninstall so I can at least access "Add or remove features"?

  Read the article

• EXT4 external hard drive for use with multiple systems

  - by EXTdumb

  I recently bought a external hard drive to store some data on. I use Linux but I am not a power user. If I format the drive to EXT4, is it possible for the permissions to ever screw up and I lost access to my data? I will be plugging the drive into several different linux based computers at work and I frequently hop distros on my main home machine. I need to make sure I don't lose any data because I overlooked something. I am not familiar with EXT 3 or 4. So far I have done this : Formatted drive to EXT4 ran gksudo thunar and changed the permissions to my user account and all settings to read/write Wrote all the files I need to the drive I really appreciate any help.

  Read the article

• CentOS 6 init script doesn't work properly

  - by user711643

  I'm setting up my ruby production server based on CentOS 6. I need a process called god (which is a process monitoring tool) to start at boot. I'm using an init script that I found here. Just as stated in the guide I ran: chkconfig --add god and then chkconfig --level 345 god on After this if I run "service god start|restart" everything works. It loads the available configurations and brings up the related processes (if they are not running). Problem is it doesn't work at boot. If I reboot the system, then I do "ps -aux | grep god". At this point "god" is running but apparently it didn't load the configuration files. If i run again service god restart, it loads everything without problems. What am I doing wrong?

  Read the article

• Squid3 not working. Access denied.

  - by Nitish

  I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

  Read the article

• After installing Windows 8, boot hangs before BIOS setup

  - by Joe Purvis

  I have an Alienware M15x, 940MX processor, 16 GB RAM, 512GB M4 SSD, and I was running Win7 64bit. I backed up the disk and ran Win 8 setup. Setup appeared to go well through multiple reboots. After the last reboot, it simply stopped after POST at "Press F2 for bios setup". I have tried powering off, reducing RAM to one stick, removing MOS battery. Now, it gets to the screen with "Press F2 for setup" and "Press F12 for boot options". If I press F2, I get a single beep only. If I press F12, nothing. I cannot get into the BIOS to change boot options to boot from another disk and restore. I do have the latest BIOS. I am going to try replacing the CMOS battery, but I don't think that is likely to help. The computer has been fast and very reliable until now.

  Read the article

• Group policies - WSUS

  - by cory

  Hello, I am really lost as to what is the reason as to why my group policy is not working on my domain. I have setup a GPO for my wsus server to a specific OU in my domain. It seems as of right now, none of my machines have inherited that GPO. I have manually put it in quite a few computers. Most of my computers in the domain are linked up to my wsus server, but all my desired settings are not there. If I run gpresult /R, On one computer I ran this on, it is linking to my backup domain controller and not my main. On another computer I checked this on, it is linking to my main DC, but it did no inherit the GPO. When looking on my DC on gpmc - I see the policy is forced to the OU as #1 precedence. Thank for any help.

  Read the article

• Script to run chown on all folders and setting the owner as the folder name minus the trailing /

  - by Shikoki

  Some numpty ran chown -R username. in the /home folder on our webserver thinking he was in the desired folder. Needless to say the server is throwing a lot of wobbelys. We have over 200 websites and I don't want to chown them all individually so I'm trying to make a script that will change the owner of all the folders to the folder name, without the trailing /. This is all I have so far, once I can remove the / it will be fine, but I'd also like to check if the file contains a . in it, and if it doesn't then run the command, otherwise go to the next one. #!/bin/bash for f in * do test=$f; #manipluate the test variable chown -R $test $f done Any help would be great! Thanks in advance!

  Read the article

• Domain account credentials fails to start scheduled tasks

  - by neoco

  I have 2 Windows 2000 servers in a domain 'DC', which run numerous windows scheduled tasks under the 'DC\Task-User' account. These tasks are and have been running successfully in the past couple of years without any account/password modifications. Yesterday, the tasks went to 'Could not start' status. Myself having an admin account, was able to run these tasks with my credentials. Today, I ran the tasks again under the DC\Task-User account and they seem to be running fine without any issues. This has happened in the past too. I'm not into networking so don't know much about the underlying problem. Has this something to do with a Domain controller account authentication? Any pointers will be great!

  Read the article

• rsnapshot stats

  - by Obscur Moirage

  I'd like to retrieve the following stats from rsnapshot files synced added files modded files deleted files Is there a feature to retrieve these in rsnapshot, or is there another product that's able to do it? EDIT: As requested, I'll try to show that I'm not just asking what I want to do without any research. I wasn't able to locate any rsnapshot feature doing this. Maybe I'm searching in a wrong direction. So, I've built a not very pretty script, called each time before rsnapshot is ran. This Perl script stores each file MD5, in order to compare backup files structures between rsnapshot updates. I'm pretty sure it's worthless to show this code here. I think that keeping an eye on what change on a server, for example, is a useful feature. So, I'm asking. @pauska Most of the time, I'm trying to search for an answer myself, which is not the case here. Thanks

  Read the article

• cPanel IPTables custom rules

  - by James Haigh

  Hi, I'm trying to allow a host access to port 3306 by IP. I've added the rule and ran an iptables-save and also service iptables save. These commands show as "OK" with no reported errors. And this works absolutely fine. Now, the server hasn't been restarted at all since I've been having this problem, but every day when I start developing on the server that needs mySQL access, it reports that the connection is refused. Back on the mySQL server, all I need to do is service iptables restart and everything then works as normal. The mySQL server is a CentOS cPanel VPS running on OpenVZ. Anyone know how I can make these rules persist? Is it something cPanel is doing overnight that is messing with my config? Thanks.

  Read the article

• Problem with Win7 connecting to Internet

  - by Lucas

  Hello, I have had Windows 7 for about a year now and for the first four months it worked perfectly. But for the last 8 months it has been horrible. It will connect to the Internet for about 5 minutes and then just lose connection. It will reconnect in about 5 minues but then it just keeps disconnecting. I ran a virus scan about 2 weeks ago and I found a Trojan on my PC which I removed and dealt with. It was fine after that but now for these last couple days it has been just as bad as before. I think a virus is causing this but I will read any suggestions and tips to help me solve this problem. Thank you. PC DETAILS: OS: WIndows 7 Home Premium 64-Bit- System Model: Aspire M5802- Processor: Intel Core 2 Quad CPU- Memory: 8192MB RAM- Graphics Card: NVIDIA GeForce GT 220

  Read the article

• Black screen with cursor after BIOS screen

  - by Radio

  Here is a weird one, Got computer with Windows XP. It's getting stuck on a black screen with cursor blinking. What did I do: - Boot from installation CD (recovery option - command line): chkdsk C: /R copy D:\i386\ntdetect.com c:\ copy D:\i386\ntldr c:\ fixmbr fixboot Chkdsk showed 0 bad sectors and no problems during scan. dir on C:\ shows all directories and files in place (Windows, Program Files, Documents and Settings). BIOS shows correct boot drive. Still does not boot. Not sure what to think of. Please help. UPDATE: Just performed these steps: Backed up current disk C: (without MBR) using True Image to external hard drive Ran Windows XP clean installation with deleting all partitions and creating new one. Hard drive booted fine into Windows GUI installation!!! Then: I interrupted installation. Booted from True Image recovery CD and restored archive of disk C to an new partition. Same issue with black screen.

  Read the article

• Trac permission denied for SVN repo

  - by plesatejvlk

  I'm running Apache2,SVN & Trac on OpenSUSE. SVN works like a charm. I've initialized trac environment for one of my SVN repositories for trac to show source code in it's repo browser and I set the repository up in the Trac web admin. I also ran the trac-admin resync for that repo without problems. Trouble is when I open the Trac repo browser I get: "can't open file: /srv/svn/repos/myrepo/format, access denied)" error. I checked the permissions and: apache runs as wwwrun tracd runs as wwwrun the whole subtree /srv/svn/... belongs to svn group and the group has rw perms all the way down to the "format" file wwwrun is in the svn group I also did the perms check: $ sudo -u wwwrun cat /srv/svn/repos/myrepo/format and got it printed out without trouble. So in my opinion there shoud not be any permission conflict. Any idea what else to check? Thanks in advance!

  Read the article

• Cannot login to server after file permissions change

  - by John

  I am using Ubuntu server. I ran: chmod -R 700 / when I was logged in as root. Now when I try to login as my normal user I immediately get kicked out. Is there anyway to log back in to the server whether it is root or whoever so that I can change the permissions? or am I totally screwed? I dont think I have root access enabled in the /etc/ssh/sshd_config file. I do have physical access to the server. I really need some help here.

  Read the article

• I can see markup characters in vim `:help`

  - by Relax

  I just created a .txt file inside .vim/doc for documenting one little function of my .vimrc, ran :helptags ~/.vim/doc and apparently the whole vim help system went wild. Now, if I open for example :help help, I see things like: This also works together with other characters, for example to find help for CTRL-V in Insert mode: > :help i^V < (notice the < and characters). I can also see the ~ at the end of headlines and the modeline at the end of the help page (thinks like vim:tw=78:ts=8:ft=help:norl:). I have no idea about what happens or how to fix it. Any clue? Thanks in advance!

  Read the article

• Ubuntu+Mono+Postgres+ASP.NET 4.0. No problem?

  - by wreck_of_u

  Would this be ok? I'm an ASP.NET developer and I'm planning to build "portable" web app servers based on Atom D510 mini-ITX. I have ran Ubuntu 10 with MySQL along with a separate IIS machines (win 2k3, 2k8) before with no problems. But now I'm thinking of "packaging" a web/db server into one small, cheap machine. I thought of Ubuntu/Mono/Postgres/ASP.NET, that it would be a good idea but I'm not sure? I have not actually tried it yet. Your thoughts?

  Read the article

• Can't get port forwarding to work on Ubuntu

  - by Znarkus

  I'm using my home server as NAT/router, which works well. But now I'm trying to forward port 3478, which I can't get to work. eth0 = public interface eth1 = private network $ cat /proc/sys/net/ipv4/conf/eth0/forwarding 1 $ cat /proc/sys/net/ipv4/conf/eth1/forwarding 1 Then to forward port 3478 to 10.0.0.7, I read somewhere that I should run iptables -t nat -A PREROUTING -p tcp -i eth0 --dport 3478 -j DNAT --to-destination 10.0.0.7:3478 iptables -A FORWARD -p tcp -d 10.0.0.7 --dport 3478 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT I also ran ufw allow 3478 But testing port 3478 with http://www.canyouseeme.org/ doesn't work. Any idea what I have done wrong?

  Read the article

• Bootstrapped Ubuntu 12.04 EC2 instance. Where to find log?

  - by nocode

  So I bootstrapped a shell script to install and run a bunch of tasks. Looks like the it ran for the most part, but I added one part and that was formatting an extra EBS volume. Pretty straightforward: mkfs.ext4 /dev/xvdf mkdir –m 000 /vol01 echo “/dev/xvdf /vol01 auto noatime 0 0” | sudo tee –a /etc/fstab sudo mount /vol01 I was able to install MongoDB, NGINX and Forever. I selected to use /dev/xdvf in the AWS console and see it. The 3rd line is not in fstab either. I've searched through various logs in /var/log/ but I don't really see much indicating the execution of the bootstrap. Logs that I see and looked through: auth.log boot.log dmesg dpkg.log syslog udev

  Read the article

• Laptop wont start after BIOS update

  - by Maven

  I have a HP Probook 4540s i recently update its BIOS from HP's site after the installation the notebook re started but since after that there is no display i waited for an hour until the battery ran off after when i plugged in its same: Capslock is contunously blinking Fan is running faster than the usual speed i can tell this from the sound And no display i waited for more than hour for any response but no gain. Searched Internet and find out that alot people fails to update their BIOS in HP laptop i dont know why official HP sites has such updates even avaialble. Is there a way i can reset the BIOS, Hard reset, through USB of something i have another PC over which i can download anything if its required? Can anyone please help.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >