Search Results

Search found 23309 results on 933 pages for 'bit operations'.

Page 722/933 | < Previous Page | 718 719 720 721 722 723 724 725 726 727 728 729  | Next Page >

• Which program is locking all my executable files?

  - by Tom Wijsman

  When updating any software product, as well as manually trying to replace .exe files, it says that access is denied to the file and in fact the System process is holding a handle to the file when I check it with Process Explorer. This must be a driver or something that is malfunctioning was my first though, but now I wonder how I figure out which driver / program is doing this and why it is so. Unlocker doesn't seem to be working for me, unless someone can tell me how to use it properly other than making it appear a magical wand in the notification area.... This is what Unlocker puts in my event log: The description for Event ID 1060 from source Application Popup cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. If the event originated on another computer, the display information had to be saved with the event. The following information was included with the event: \??\C:\Program Files (x86)\Unlocker\UnlockerDriver5.sys the message resource is present but the message is not found in the string/message table Upon searching event 1060 I get: <file name> has been blocked from loading due to incompatibility with this system. Perhaps it is because I have 64 bit?

  Read the article

• How to minimize the risk of employees spreading critical information?

  - by Industrial

  Hi everyone, What's common sense when it comes to minimising the risk of employees spreading critical information to rivalling companies? As of today, it's clear that not even the US government and military can be sure that their data stays safely within their doors. Thereby I understand that my question probably instead should be written as "What is common sense to make it harder for employees to spread business critical information?" If anyone would want to spread information, they will find a way. That's the way life work and always has. If we make the scenario a bit more realistic by narrowing our workforce by assuming we only have regular John Does onboard and not Linux-loving sysadmins , what should be good precautions to at least make it harder for the employees to send business-critical information to the competition? As far as I can tell, there's a few obvious solutions that clearly has both pros and cons: Block services such as Dropbox and similar, preventing anyone to send gigabytes of data through the wire. Ensure that only files below a set size can be sent as email (?) Setup VLANs between departments to make it harder for kleptomaniacs and curious people to snoop around. Plug all removable media units - CD/DVD, Floppy drives and USB Make sure that no configurations to hardware can be made (?) Monitor network traffic for non-linear events (how?) What is realistic to do in a real world? How does big companies handle this? Sure, we can take the former employer to court and sue, but by then the damage has already been caused... Thanks a lot

  Read the article

• Can't find partition tab in disk utility osX ver. 10.6.8

  - by John W

  I just got a used Mac Book Pro. I created a new admin account and deleted the old one as well as one other user. This is an older late 2007 MBP... the osX upgrade to 10.6.8 was just performed. My Macintosh HD is showing up as Partition 2. I ran disk utility (not from install disk), but there was no partition tab. I have a 160GB drive with only 53GB of space left on it. Since I am the only user and have no files on the laptop yet, I don't understand why there is so little space left. Surely the OS can't use up over 100GB. I wanted to run disk utility to see if there were any recovery partitions or other partition left over from the previous owner that could be erased to make room for expanding the main partition. Unfortunately, there is no partition tab in disk utility. The documentation I have found on line states that this version of osX includes that utility. The osX disks I have are for an older version so I wasn't sure if they would be of any use in solving this problem. Also, I was afraid if using the disks, would I lose the little bit of data/apps that I have assembled. I would rather not do a fresh install and have to do all the updates again to achieve this. The previous owner had some apps that I don't want to lose as I would have to pay handsomely to get them back. Simply, if all the previous users data is backed up on here after deleting user is still taking up space on a recovery partition (that I can't see)... I need to locate it erase it and expand the primary partition to re-aquire disk space for my files. I am new to Mac, so please be as descriptive as possible. Thanks.

  Read the article

• What's throttling the database?

  - by Troels Arvin

  Hardware: Intel x86_64 with 192GB of RAM. OS: CentOS 5.4 x86_64. DBMS: DB2 v. 9.7.1 64 bit. During certain special workloads (e.g. parallel REORGs/RUNSTATs), I've seen the server transporting 450MB/s with 25000IO/s (yes, there is probably some storage system caching happening here) while all CPU cores were happily working in an even mix of usermode/wait. And disk benchmark tools can also bring some very satisfying bandwith and IO/s numbers to the table. On the other hand, we also have another scenario: A single rather complex query with at least one large table scan. db2's "list applications" reports that the query is Executing (not locked). IO: At most 10MB/s, 500 IO/s; CPU: two cores in 99.9% wait state, all other cores 100% idle. The tables which the query reads from have been altered to have LOCKSIZE=TABLE, so I would think that lock list work is zero. What's going on in such a situation? What tools/snapshots/... can I use to gain better insight in such a case?

  Read the article

• Windows 7 Taskbar resets on every login

  - by Arne Mertz

  I like to reorder my Taskbar a bit, other than the Windows 7 default is. I use two "rows", the lower is for quicklaunch and other toolbars: This works perfectly, as long as I don't log off from the computer. Every time I log in, Windows 7 has messed up/reset the toolbar positions like this: So I have to drag them into position again and again, every morning. Fixing the taskbar positions won't help, I tried to google for the problem but it does not seem to be very common. Does anyone recognize that problem and has a solution? Update: This is not the AutoLogon bug. AutoLogon is off. We have installed Novell at our company, and it does not matter wether I log directly onto the Novell network or only to the computer first and to Novell later. Update2: I get the same issue when I logon without Novell, i.e. when I log on only to the computer. When I boot in safe mode, the taskbar looks essentially the same: Update3: KB979155 says it's "not applicable to my system". Creating a neew user is not an option since I don't have the admin privileges to do that - I have almost any other local admin privileges, though.

  Read the article

• Routing for remote gateway over VPN in Vista/7 broken?

  - by Raymond

  Hi, Situation is as follows. Home computer running Windows 7, sets up VPN connection (LT2P + IPSec, "use remote gateway" disabled) to office. Subnet is 192.168.64.x Office has Draytek Vigor 2920 router, subnet is 192.168.32.x What happens? - VPN connection itself works fine - Can ping any machine on the remote network - When trying to open a webpage from a host in the remote network, the remote server logs the incoming request, but the browser hangs on "waiting for..." and eventually times out. I have observed this problem on Windows Vista and Windows 7. On Windows XP however there is no problem like described above. The only clue I have is that there is a difference in the routing between XP and Vista/7. The output of "route print" on Windows XP looks like this: (See www.latunyi.com/routing_xp.png) So here the gateway for the 192.168.32.x subnet is the IP address that the local computer has in the remote network. The output of "route print" on Windows 7 (and Windows Vista) looks like this: (See www.latunyi.com/routing_win7.png") Now the gateway for the 192.168.32.x subnet is the IP address of the VPN router (32.1). I don't know if that causes this trouble, but it seems a bit strange. Enabling "use default gateway on remote network" doesn't make a difference. Using the new option "Disable class based route addition" in Windows 7 only makes the route to the VPN router disappear. I am really puzzled here. I assume the VPN routing can't be broken in both Vista and Windows 7, and this should just work without manually adding routes. I hope someone has a solution for this problem :-). Thanks!

  Read the article

• Apache https is slsow

  - by raucous12

  Hey, I've set apache up to use SSL with a self signed certificate. With http (KeepAlive off), I can get over 5000 requests per second. However, with https, I can only get 13 requests per second. I know there is supposed to be a bit of an overhead, but this seems abnormal. Can anyone suggest how I might go about debugging this. Here is the ab log for https: Server Software: Apache/2.2.3 Server Hostname: 127.0.0.1 Server Port: 443 SSL/TLS Protocol: TLSv1/SSLv3,DHE-RSA-AES256-SHA,4096,256 Document Path: /hello.html Document Length: 29 bytes Concurrency Level: 5 Time taken for tests: 30.49425 seconds Complete requests: 411 Failed requests: 0 Write errors: 0 Total transferred: 119601 bytes HTML transferred: 11919 bytes Requests per second: 13.68 [#/sec] (mean) Time per request: 365.565 [ms] (mean) Time per request: 73.113 [ms] (mean, across all concurrent requests) Transfer rate: 3.86 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 190 347 74.3 333 716 Processing: 0 14 24.0 1 166 Waiting: 0 11 21.6 0 165 Total: 191 361 80.8 345 716 Percentage of the requests served within a certain time (ms) 50% 345 66% 377 75% 408 80% 421 90% 468 95% 521 98% 578 99% 596 100% 716 (longest request)

  Read the article

• Low-traffic WordPress website on Apache keeps crashing server

  - by OC2PS

  I have recently moved my low-moderate traffic (1000 UAUs, 5000 pageviews on a busy day) website from shared hosting to a Centos 6 64-bit VPS with Apache and cPanel running on 4 quad-core processor (likely oversold) and 3GB memory (Xen). We've had problems from the beginning. The server keeps crashing. It seems PHP keeps expanding till it consumes all the memory and crashes the server. Some folks have suggested that I should abandon Apache/cPanel/PHP/mySQL and go with nginX/Varnish/PHP-FPM/SQLite. But that's just not possible for me as I am not very tech savvy and need a simple GUI like cPanel to be able to manage the mundane management tasks (can't afford to hire system administrator or get fully managed hosting). I have come across several posts discussing optimization of Apache for WordPress. But all of these lead to articles that are pretty dated such as this ~4 year old one from Jan 2009 - http://thethemefoundry.com/blog/optimize-apache-wordpress/ The article is pretty detailed and seems helpful, but I stumble even on the first step. My httpd.conf only has 2 loadmodule commands LoadModule fastinclude_module modules/mod_fastinclude.so LoadModule bwlimited_module modules/mod_bwlimited.so So I go total bust right there. Further, my httpd.conf says Direct modifications to the Apache configuration file may be lost upon subsequent regeneration of the configuration file. To have modifications retained, all modifications must be checked into the configuration system by running: /usr/local/cpanel/bin/apache_conf_distiller I am having trouble finding where to change the modules in WHM. Please can someone help me with updated guidelines on how to optimize Apache for WordPress? Many thanks! P.S. The WordPress installation also has WP Super Cache installed. P.P.S. I also have phpBB, OpenCart, and Menalto Gallery installed.

  Read the article

• Variable Assignment for arguments with a for loop

  - by RainbowDashDC

  Alright, so, I've searched quite a bit on how to do this but I've given up as I simply couldn't find anything. So, I have a code (below); it's main purpose is to get 9 arguments and assign them as a variable-- ignore the echo's and pipping. My question is: How can I simplfy this with a for loop or such so it doesn't take as much code, and if possible, have more than 9 arguments aswell set pkg1=%1 set pkg2=%2 set pkg3=%3 set pkg4=%4 set pkg5=%5 set pkg6=%6 set pkg7=%7 set pkg8=%8 set pkg9=%9 IF DEFINED pkg1 (echo %1.ini 1> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg2 (echo %2.ini 1>> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg3 (echo %3.ini 1>> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg4 (echo %4.ini 1>> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg5 (echo %5.ini 1>> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg6 (echo %6.ini 1>> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg7 (echo %7.ini 1>> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg8 (echo %8.ini 1>> %WINGET_TEMP%\args.rdc 2>nul) IF DEFINED pkg9 (echo %9.ini 1>> %WINGET_TEMP%\args.rdc 2>nul)

  Read the article

• Nagios DNX plugins

  - by danneh3826

  I'm toying with the idea of multiple Nagios instances setup to monitor our infrastructure. I've looked at all the various methods of distributed Nagios checks, and I think DNX comes out the closest. DNX handles failure of worker nodes, that's fine. What happens if the main DNX server fails though? Is there a way to replicate the server too? I'm using AWS EC2 primarily, so I can utilise Elastic Load Balancing for the web UI, but I need to be able to handle the AZ where the monitoring server is to fail over, and essentially for a second to pick up the checking load (active/passive, active/active, so long as it doesn't fail completely) The other thing I'm trying to solve is an issue with routing. What I'd like is to have multiple nodes report a fault before Nagios confirms it as critical. Not the NRPE checks, as they're pretty self explanitory, but things more like check_ping. I often have routing issues out of AWS to certain datacenters, so Nagios can often report bad/no ping/timeout as a critical issue, even though the machine in question is working fine. Would it be possible to have a setup where a worker complains a service check is critical, and have a second worker node (positioned in another datacenter/AZ) also report the service as critical before the Nagios central server issues a critical alert? I realise I might be asking a bit much (how far down the line do you go setting up failover systems before it starts to get ridiculous), however surely someone must have thought of this scenario when developing DNX?

  Read the article

• The BitLocker encrypted logical drive of my laptop is not accessible. On clicking error appears,"Application not found"

  - by Nauman Khan

  I had an important personal data that was stored in my laptop drive 'F'. My 4 year old son also uses my laptop to play games. To secure my data I used bitlocker software that was already there in my windows 7 ultimate 32 bit. I am using a Dell D 630 Core2Duo laptop. The thing worked fine for me and I have been able to access my data in drive 'F' as and when I required. But today, when I tried to open my 'F' drive, an error box appeared saying "Application not found". I right clicked and checked 'properties' of 'F' drive. It showed me Used Space = 0 bytes and Free Space = 0 bytes. I opened 'Disk Management' which showed my 'F' drive file system as 'Unknown (Bitlocker Encrypted). 'Disk Management' is also showing my 'F' drive as healthy logical drive. I opened 'Manage bitlocker' and found that my 'F' drive was being shown locked and 'Unlock Drive' was displayed against it, however, when i click on 'Unlock Drive', it does not function. I opened 'TPM Administration' and found an information that 'Compatible TPM cannot be found'. My bitlocker encryption was working fine which means that I had a compatible TPM in my laptop. Where has it gone? How can I enable it? Is my 'F' Drive lost forever and thus the data in there as well?

  Read the article

• Cacti Login Page: Infinite loop occurs

  - by beicha

  Apache 2.2.3 | PHP 5.1.6 | MySQL 5.0.77 I followed cacti installation guide to install latest cacti 0.8.7h on CentOS 5.5 (64-bit). The installation of PHP/Apache/MySQL went smoothly until I finished the setup, and came to the login page. I can login http://.../cacti/index.php with admin account but the new page is redirected to the same login page with the message "Please enter your Cacti user name and password below" This is a infinite loop! If I use a wrong admin password I get the correct error message "Invalid User Name/Password Please Retype". [Same problem here] If I login use Guest/guest account, "Error: Access Denied, user account disabled." displays. The Cacti log file (./cacti/log/cacti.log) is empty. I Googled and seems this problem has existed for a long time, but no followup solutions were found on the forum posts I found. Anyone can help me on this problem? If more information needed, please let me know. Nov 18, 2011 UPDATE: I re-installed Cacti, this question remains UNSOLVED.

  Read the article

• Postfix auto create Maildir

  - by Eugene

  I've been beating my head against a wall for a while now on this one. Basically, here is the rundown: Our MX record points to a frontend SMTP server, which contains aliases for actually routing the mail. No alias, no access to the backend storage server, which is what our clients connect to. I'm upgrading the backend email server. Currently, a user is created for every email user on the server, which creates the mailbox. On the new server, everything autheticates through PAM to an LDAP server (all of which is working properly). My goal is to get Postfix to create the Maildir directory for the user automatically. This works fine when I have the /home directory with 777 permissions, but for obvious reasons, this should be avoided. I would like to do this with 775 permissions on /home with a group owner of whatever user Postfix is running as, but I can't seem to figure out what user to use. With the 777 permissions, the /home/$user/Maildir directory is created on message delivery. Does anybody know how I can do this without 777 permissions? The system I am working on is a 64-bit Debian Lenny 5.07 install. Any advice would be appreciated.

  Read the article

• Windows Server 2008 IIS Random disconnect

  - by d123

  I am having a bit of a quirk with my IIS server. I'm running my IIS with 2 sets of IPs configured, one in the 192 range and the other in 172 range. I then have multiple apps which will talk to this server for information. Server has no AV or firewalls configured. I noticed that my apps when talking to the server on the 172 range, at random intervals, the server would just not respond. My apps would then disconnect and just try again, and every thing would be fine. This doesn't happen on the 192 range. So what I did is on a Linux box I did a watch command and to wget a file every half second on the 172 and 192 IPs. I noticed the same issue, every once in awhile wget on the 172 range would not get through, but there is no issues at all on 192. Thus I went around to Wireshark and did a dump. This is the last 3 packets, no other packets were received. 7010 100.871877 200.100.30.7 172.0.0.1 TCP 59619 http [ACK] Seq=140 Ack=85242 Win=64128 Len=0 TSV=1072818795 TSER=1660246133 7011 100.872238 200.100.30.7 172.0.0.1 TCP 59619 http [FIN, ACK] Seq=140 Ack=85242 Win=64128 Len=0 TSV=1072818796 TSER=1660246133 7013 100.873081 200.100.30.7 172.0.0.1 TCP 59619 http [ACK] Seq=141 Ack=85243 Win=64128 Len=0 TSV=1072818796 TSER=1660246133 So this is my issue, there is a random disconnect every once in awhile. The server doesn't receive the next SYN packet. HELP?

  Read the article

• Why do I have redundant routing in Windows 7?

  - by Mark

  I'm trying to better understand my routing tables. My routing table is: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 1. 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.151 25 2. 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 3. 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 4. 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 5. 192.168.1.0 255.255.255.0 On-link 192.168.1.151 281 6. 192.168.1.151 255.255.255.255 On-link 192.168.1.151 281 7. 192.168.1.255 255.255.255.255 On-link 192.168.1.151 281 8. 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 9. 224.0.0.0 240.0.0.0 On-link 192.168.1.151 281 10. 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 11. 255.255.255.255 255.255.255.255 On-link 192.168.1.151 281 =========================================================================== Most of those entries make sense to me, but a few confuse me: 2 and 3 seem redundant, as do 2 and 4. Why not just 2? 5 and 6 seem redundant, as do 5 and 7. Why not just 5? I'm trying to grok routing tables and this bit is still confusing me.

  Read the article

• Mysqld not starting due to apparent db corruption

  - by pitosalas

  I am very new at admining mysql, and bad for me, something caused the db to get clobbered. There are many error messages in the log that I am not sure how to safely proceed. Can you give some tips? Here's the log: 110107 15:07:15 mysqld started 110107 15:07:15 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 110107 15:07:15 InnoDB: Starting log scan based on checkpoint at InnoDB: log sequence number 35 515914826. InnoDB: Doing recovery: scanned up to log sequence number 35 515915839 InnoDB: 1 transaction(s) which must be rolled back or cleaned up InnoDB: in total 1 row operations to undo InnoDB: Trx id counter is 0 1697553664 110107 15:07:15 InnoDB: Starting an apply batch of log records to the database... InnoDB: Progress in percents: 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 InnoDB: Apply batch completed InnoDB: Starting rollback of uncommitted transactions InnoDB: Rolling back trx with id 0 1697553198, 1 rows to undoInnoDB: Error: trying to access page number 3522914176 in space 0, InnoDB: space name ./ibdata1, InnoDB: which is outside the tablespace bounds. InnoDB: Byte offset 0, len 16384, i/o type 10 110107 15:07:15InnoDB: Assertion failure in thread 3086403264 in file fil0fil.c line 3922 InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/mysql/en/Forcing_recovery.html InnoDB: about forcing recovery. mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=0 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 217599 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffc55ac, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x8139eec 0x83721d5 0x833d897 0x833db71 0x832aa38 0x835f025 0x835f7a3 0x830a77e 0x8326b57 0x831c825 0x8317b8d 0x82a9e66 0x8315732 0x834fc9a 0x828d7c3 0x81c29dd 0x81b5620 0x813d9fe 0x40fdf3 0x80d5ff1 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://dev.mysql.com/doc/mysql/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. 110107 15:07:15 mysqld ended

  Read the article

• (Win7) Gets stuck with ~1% CPU. Especially with multithreading

  - by meow

  Windows 7 32 bit, up to date, Intel i7 860. (For some reason the company runs 32bit Windows everywhere.) I tried to update all motherboard drivers etc. as far as possible. I have a performance issue with a machine which appears in connection with multithreading (or so I think). As an example (and where I most often see it, but it appears on other programs as well): ProteoWizard is a file conversion tool for mass spectrometry files. I can add a list of files and it will attempt to process up to 8 files in parallel (quadcore x 2 threads/core). If I choose 1 to 6 files, I start the process and it goes straight through. If I have =7 files in the queue, conversion goes to ~20%, then gets stuck for 15 seconds, then continues again, always in "chunks" of a few % before getting stuck again. During the time the process is stuck, CPU is at 1%. RAM is not limiting, it is maybe at 70% or so and not going up. I don't get the same problem on other, even slower machines. The computer gets also stuck at 1% CPU doing nothing on other occasions, but for multithreading it is most frequent. Where should I look for the problem?

  Read the article

• How to setup RAID 1 with Intel RST on an existing Windows 7 system?

  - by instcode

  I'd like to setup RAID-1 using Intel Rapid Storage Technology on my Windows 7 64-bit system. I have an 1TB SATA HDD with Windows 7 system installed on the first primary partition (leftmost, ~200GB). The rest of this HDD is unallocated (~800GB). I bought another 2TB SATA, then created a primary partition (leftmost, ~500GB) and filled my data in. The rest of this HDD is unallocated (~1.5TB). A quick disk layout (XXX is the unallocated region): HDD1 (1TB): [ 200GB C:\ SYSTEM | XXXXXXXXXXXX ] HDD2 (2TB): [ 500GB Z:\ PROGRAM | XXXXXXXXXXXXXXXXXXXXXX ] Now, I want to create a 500GB RAID-1 partition (I'm not sure if using "partition" is correct here) on the rightmost of the 2 HDDs above without losing any existing data from both disks. Here is the expected layout: HDD1 (1TB): [ 200GB C:\ SYSTEM | XXXXXX | 500GB D:\ DATA - RAID-1 ] HDD2 (2TB): [ 500GB Z:\ PROGRAM | XXXXXXXXXXXXXXXX | 500GB D:\ DATA RAID-1] Let's not concern about data lost, is it possible to have that final layout using Intel RST? Previously, I tried this layout using dynamic disk & software RAID from Windows and it worked as expected, however, it's quite ugly in resynching after an OS failure that I don't want. If yes, is there a way to keep the data on existing partitions untouched or, at least, it should keep the SYSTEM partition safe (I'm okay if the PROGRAM partition has to be gone.)? Well, are there any strict/special steps I should follow when using the Intel RST manager in order to achieve that? If none of those questions above are "Yes", could you please suggest some other possible layouts that leave the C:SYSTEM partition untouched?

  Read the article

• Scheduled Task unable to create/update any files

  - by East of Nowhere

  I have several tasks in Task Scheduler in Windows Server 2008 SP2 (32-bit) and they all successfully "do their work", except for creating or updating any files on Windows. All the tasks point to simple .cmd files that have the real work but beyond that there's no pattern: some call robocopy with the /LOG option, some call .exe files I wrote that manipulate XML files, some just do stuff with > redirection. With all of them, if I double-click the .cmd file myself, it works fine and the files are created or updated or whatever. If I run it from Task Scheduler (by the schedule or just clicking Run), the task always completes "successfully" but without any of the desired changes to files. I don't see any "unable to create file" errors in Event Viewer either. The tasks do all Run As a specific account, but I have logged in as that account and verified that it has permissions to do everything it needs to. Further details -- Task is set to Run whether user is logged in or not. Configured for: "Windows Vista or Windows Server 2008", there is no other Configured for option available.

  Read the article

• ASUS laptop doesn't charge/use the battery after reinstalling Windows 7

  - by Stan

  I've done a clean install of Windows 7 x64 on an ASUS X501A laptop. The battery is detected and shows in the system tray as "plugged in, charging". However the charge level stays at 76% and if the AC cord is plugged out the laptop turns off. The laptop does not turn on without being plugged in either. Everything worked perfectly prior to reinstall. I've tried: Downloading and installing all the ASUS drivers, including the ATK ACPI driver Checking the BIOS - there do not seem to be any battery-related settings Flashing the BIOS to the latest version Uninstalling Microsoft ACPI-Compliant Control Method Battery in device manager as suggested on the internet Full power discharge/ATX reset as suggested by ASUS support: remove mains power charger, remove battery, press and hold power button for 10 seconds, reconnect battery and mains and turn on I have a feeling all this may have something to do with the EFI BIOS that comes on the laptop. During the reinstall I had to delete all partitions and start anew, because the Windows installer complained about the improper order of GPT partitions. The EFI System Partition was recreated by the installer, and I am guessing that it may be missing the particular ACPI driver needed to make the battery work. I've tried researching this, but could not come up with any useful info. I am hoping someone here may know a bit more about this and maybe help me understand what's going on and how to fix it. Barring that, I'll have to re-image the drive off an identical ASUS laptop with stock install and hope it fixes things.

  Read the article

• Ubuntu 12.04 Very slow especially with Android Studio

  - by Nada

  I have an old laptop with the following specification: Memory: 485 MiB, Processor: Genuine intel CPU T2300 @ 1.66 GHz ×2, OS Type: 32 bit, Disk: 78.1 GB, I installed on it Ubuntu 12.04 LTS and I noticed that the overall system is very slow in responding. I tried to search about that in the internet and I found some articles talking about how to make Ubuntu 12.04 LTS run fast I applied all what they said including download LXDE desktop environment and then nothing different in the system response time. Then I need to develop some android applications so, I download Android Studio (Beta) 0.8.6. The problem became worse than before whenever I tried to open the Android Studio the screen is frozen for some minutes then it took time to download the projects and initialize the work space also, when I tried to move the cursor he is move very slowly. When I tried to run my first application on the AVD it took three hours and still not run yet. I delete the Android Studio and install it again several times, I was trying to solve the problem but still nothing change. Please if you have any suggestions that may help me make my laptop and Android Studio work faster I will appreciate it for you. Thank you in advance.

  Read the article

• Recent DDE / file open issue with Office 2007 affecting only a few machines, is a Windows Update to blame?

  - by kafka

  All our workstations run Windows 7 Professional 64 bit. It started with one, then another, then another couple of machines having a problem accessing Word files locally and on the network. This doesn't happen on my machine though. Affected users get the error message 'There was a problem sending the command to the program'. I've Googled for solutions, but none of the answers worked. They suggested deleting certain registry keys; unregistering and reregistering the program for DDE; resetting the way that the shell opens .docx programs etc. each to no avail. As it affects local and network shares I believe the problem lies with the clients, and not the server, and I'm starting to suspect that there could have been a recent Windows Update which has caused this. I've tried comparing the updates on my working machine with an affected machine, but I can't immediately see any major differences. Has anyone else recently encountered this problem? What are the best steps to take to further isolate what could be causing this?

  Read the article

• How to Set Up an SMTP Submission Server on Linux

  - by Kevin Cox

  I was trying to set up a mail server with no luck. I want it to accept mail from authenticated users only and deliver them. I want the users to be able to connect over the internet. Ideally the mail server wouldn't accept any incoming mail. Essentially I want it to accept messages on a receiving port and transfer them to the intended recipient out port 25. If anyone has some good links and guides that would be awesome. I am quite familiar with linux but have never played around with MTA's and am currently running debian 6. More Specific Problem! Sorry, that was general and postfix is complex. I am having trouble enabling the submission port with encryption and authentication. What Works: Sending mail from the local machine. (sendmail [email protected]). Ports are open. (25 and 587) Connecting to 587 appears to work, I get a "need to starttls" warning and starttls appears to work. But when I try to connect with the next command I get the error below. # openssl s_client -connect localhost:587 -starttls smtp CONNECTED(00000003) depth=0 /CN=localhost.localdomain verify error:num=18:self signed certificate verify return:1 depth=0 /CN=localhost.localdomain verify return:1 --- Certificate chain 0 s:/CN=localhost.localdomain i:/CN=localhost.localdomain --- Server certificate -----BEGIN CERTIFICATE----- MIICvDCCAaQCCQCYHnCzLRUoMTANBgkqhkiG9w0BAQUFADAgMR4wHAYDVQQDExVs b2NhbGhvc3QubG9jYWxkb21haW4wHhcNMTIwMjE3MTMxOTA1WhcNMjIwMjE0MTMx OTA1WjAgMR4wHAYDVQQDExVsb2NhbGhvc3QubG9jYWxkb21haW4wggEiMA0GCSqG SIb3DQEBAQUAA4IBDwAwggEKAoIBAQDEFA/S6VhJihP6OGYrhEtL+SchWxPZGbgb VkgNJ6xK2dhR7hZXKcDtNddL3uf1YYWF76efS5oJPPjLb33NbHBb9imuD8PoynXN isz1oQEbzPE/07VC4srbsNIN92lldbRruDfjDrAbC/H+FBSUA2ImHvzc3xhIjdsb AbHasG1XBm8SkYULVedaD7I7YbnloCx0sTQgCM0Vjx29TXxPrpkcl6usjcQfZHqY ozg8X48Xm7F9CDip35Q+WwfZ6AcEkq9rJUOoZWrLWVcKusuYPCtUb6MdsZEH13IQ rA0+x8fUI3S0fW5xWWG0b4c5IxuM+eXz05DvB7mLyd+2+RwDAx2LAgMBAAEwDQYJ KoZIhvcNAQEFBQADggEBAAj1ib4lX28FhYdWv/RsHoGGFqf933SDipffBPM6Wlr0 jUn7wler7ilP65WVlTxDW+8PhdBmOrLUr0DO470AAS5uUOjdsPgGO+7VE/4/BN+/ naXVDzIcwyaiLbODIdG2s363V7gzibIuKUqOJ7oRLkwtxubt4D0CQN/7GNFY8cL2 in6FrYGDMNY+ve1tqPkukqQnes3DCeEo0+2KMGuwaJRQK3Es9WHotyrjrecPY170 dhDiLz4XaHU7xZwArAhMq/fay87liHvXR860tWq30oSb5DHQf4EloCQK4eJZQtFT B3xUDu7eFuCeXxjm4294YIPoWl5pbrP9vzLYAH+8ufE= -----END CERTIFICATE----- subject=/CN=localhost.localdomain issuer=/CN=localhost.localdomain --- No client certificate CA names sent --- SSL handshake has read 1605 bytes and written 354 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: E07926641A5EF22B15EB1D0E03FFF75588AB6464702CF4DC2166FFDAC1CA73E2 Session-ID-ctx: Master-Key: 454E8D5D40380DB3A73336775D6911B3DA289E4A1C9587DDC168EC09C2C3457CB30321E44CAD6AE65A66BAE9F33959A9 Key-Arg : None Start Time: 1349059796 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- 250 DSN read:errno=0 If I try to connect from evolution I get the following error: The reported error was "HELO command failed: TCP connection reset by peer".

  Read the article

• daily rsync backups with hard links, checksums, and a new computer

  - by user75058

  I backup my laptop to a Fedora desktop daily using rsync with hard links. This has worked great for almost a year. I recently purchased a new computer, transferred over my data, and would like to continue backing up this computer daily. However, due to the data transfer from the old laptop to the new laptop, the timestamps have obviously changed, and will thus cause my daily rsync backup to re-transfer all of the data. I thought that by adding the -c (checksum) switch to my rsync backup it would match files based on checksum, instead of timestamp and size, and only transfer those files that are different or not present. This appeared to work, but upon examining the new backup, hard links are not being created, and it appears the files that should be hard linked are simply being copied to the new backup directory from the previous backup directory on the backup server. This is very peculiar behavior to me, and I am having trouble figuring out why this is occurring. Checksums match for files that I think should be hard linked. I have looked through the rsync man page and Google'd around a bit and have been unable to find anything for me to better understand this behavior.

  Read the article

• pcfg_openfile: unable to check htaccess file, ensure it is readable

  - by rxt

  After moving a website folder on my local development machine to another drive, then moving it back, I got a 403 error. Most of this problem had probably to do with rights that got messed up. After deleting the code and restoring it from SVN, the rights seemed allright. The error stayed however. The setup is a bit complex, as follows: I have Ubuntu 10.4 as development machine, trying to mimic the server as much as possible We use Eclipse + SVN and I create all projects in a local folder under my user account In /var/www-vhosts I create folders for each vhost, like this one: test.localhost test.local/index.php: includes the index file of the project test.local/.htaccess is a dynamic link to the htaccess file in a project subfolder I get the following error in the apache error log: [Thu Jul 08 15:55:56 2010] [crit] [client 127.0.0.1] (13)Permission denied: /var/www-vhosts/test.localhost/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable The problem seems to be the .htaccess file, or the link to it. When I empty the htaccess, nothing changes When I remove the link, the index-include produces some output (in the apache error log) When I remove the link and replace it with the actual file, I get another error: [Thu Jul 08 16:47:54 2010] [error] [client 127.0.0.1] Symbolic link not allowed or link target not accessible: /var/www-vhosts/test.localhost/test I'm lost here, don't know what to do next. Do you have any ideas what I can try? This setup has worked before, but I don't know what is different now.

  Read the article

< Previous Page | 718 719 720 721 722 723 724 725 726 727 728 729  | Next Page >