Search Results

Search found 32568 results on 1303 pages for 'linux pwns mac'.

Page 723/1303 | < Previous Page | 719 720 721 722 723 724 725 726 727 728 729 730  | Next Page >

• macbook pro 13"

  - by LINUX

  Hej Bytte nyligen HD 250GB till 640GB 7200rpm nu har jag bara ca.5 tim battery tid ... och HD snurrar hela tiden. hur kan jag sova ner Hd efter t.ex. 5 minuter ? Tack på förhand. English Translation: I recently switched from a 250GB to 640GB 7200rpm hard drive. Now I only have a 5hr battery life and the hard drive is spinning constantly. How can I spin down the hard drive for, for example, 5 minutes? Thanks in advance.

  Read the article

• PPTP ping client to client error

  - by Linux Intel

  I installed pptp server on a centos 6 64bit server PPTP Server ip : 55.66.77.10 PPTP Local ip : 10.0.0.1 Client1 IP : 10.0.0.60 centos 5 64bit Client2 IP : 10.0.0.61 centos5 64bit PPTP Server can ping Client1 And client 1 can ping PPTP Server PPTP Server can ping Client2 And client 2 can ping PPTP Server The problem is client 1 can not ping Client 2 route -n on PPTP Server Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.60 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 10.0.0.61 0.0.0.0 255.255.255.255 UH 0 0 0 ppp1 55.66.77.10 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 55.66.77.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 1 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 70.14.13.19 255.255.255.255 UGH 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1 0.0.0.0 70.14.13.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 2 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 84.56.120.60 255.255.255.255 UGH 0 0 0 eth1 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 84.56.120.60 0.0.0.0 UG 0 0 0 eth1 cat /etc/ppp/options.pptpd on PPTP server ############################################################################### # $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $ # # Sample Poptop PPP options file /etc/ppp/options.pptpd # Options used by PPP when a connection arrives from a client. # This file is pointed to by /etc/pptpd.conf option keyword. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 and the kernel MPPE module. ############################################################################### # Authentication # Name of the local system for authentication purposes # (must match the second field in /etc/ppp/chap-secrets entries) name pptpd # Strip the domain prefix from the username before authentication. # (applies if you use pppd with chapms-strip-domain patch) #chapms-strip-domain # Encryption # (There have been multiple versions of PPP with encryption support, # choose with of the following sections you will use.) # BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o # {{{ refuse-pap refuse-chap refuse-mschap # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. require-mschap-v2 # Require MPPE 128-bit encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) require-mppe-128 # }}} # OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o # {{{ #-chap #-chapms # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. #+chapms-v2 # Require MPPE encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) #mppe-40 # enable either 40-bit or 128-bit, not both #mppe-128 #mppe-stateless # }}} # Network and Routing # If pppd is acting as a server for Microsoft Windows clients, this # option allows pppd to supply one or two DNS (Domain Name Server) # addresses to the clients. The first instance of this option # specifies the primary DNS address; the second instance (if given) # specifies the secondary DNS address. #ms-dns 10.0.0.1 #ms-dns 10.0.0.2 # If pppd is acting as a server for Microsoft Windows or "Samba" # clients, this option allows pppd to supply one or two WINS (Windows # Internet Name Services) server addresses to the clients. The first # instance of this option specifies the primary WINS address; the # second instance (if given) specifies the secondary WINS address. #ms-wins 10.0.0.3 #ms-wins 10.0.0.4 # Add an entry to this system's ARP [Address Resolution Protocol] # table with the IP address of the peer and the Ethernet address of this # system. This will have the effect of making the peer appear to other # systems to be on the local ethernet. # (you do not need this if your PPTP server is responsible for routing # packets to the clients -- James Cameron) proxyarp # Normally pptpd passes the IP address to pppd, but if pptpd has been # given the delegate option in pptpd.conf or the --delegate command line # option, then pppd will use chap-secrets or radius to allocate the # client IP address. The default local IP address used at the server # end is often the same as the address of the server. To override this, # specify the local IP address here. # (you must not use this unless you have used the delegate option) #10.8.0.100 # Logging # Enable connection debugging facilities. # (see your syslog configuration for where pppd sends to) debug # Print out all the option values which have been set. # (often requested by mailing list to verify options) #dump # Miscellaneous # Create a UUCP-style lock file for the pseudo-tty to ensure exclusive # access. lock # Disable BSD-Compress compression nobsdcomp # Disable Van Jacobson compression # (needed on some networks with Windows 9x/ME/XP clients, see posting to # poptop-server on 14th April 2005 by Pawel Pokrywka and followups, # http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 ) novj novjccomp # turn off logging to stderr, since this may be redirected to pptpd, # which may trigger a loopback nologfd # put plugins here # (putting them higher up may cause them to sent messages to the pty) cat /etc/ppp/options.pptp on Client1 and Client2 ############################################################################### # $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $ # # Sample PPTP PPP options file /etc/ppp/options.pptp # Options used by PPP when a connection is made by a PPTP client. # This file can be referred to by an /etc/ppp/peers file for the tunnel. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/ # and the kernel MPPE module available from the CVS repository also on # http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe. ############################################################################### # Lock the port lock # Authentication # We don't need the tunnel server to authenticate itself noauth # We won't do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2 # (you may need to remove these refusals if the server is not using MPPE) refuse-pap refuse-eap refuse-chap refuse-mschap # Compression # Turn off compression protocols we know won't be used nobsdcomp nodeflate # Encryption # (There have been multiple versions of PPP with encryption support, # choose which of the following sections you will use. Note that MPPE # requires the use of MSCHAP-V2 during authentication) # # Note that using PPTP with MPPE and MSCHAP-V2 should be considered # insecure: # http://marc.info/?l=pptpclient-devel&m=134372640219039&w=2 # https://github.com/moxie0/chapcrack/blob/master/README.md # http://technet.microsoft.com/en-us/security/advisory/2743314 # http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras # ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o # If the kernel is booted in FIPS mode (fips=1), the ppp_mppe.ko module # is not allowed and PPTP-MPPE is not available. # {{{ # Require MPPE 128-bit encryption #require-mppe-128 # }}} # http://mppe-mppc.alphacron.de/ fork from PPP project by Jan Dubiec # ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o # {{{ # Require MPPE 128-bit encryption #mppe required,stateless # }}} IPtables are stopped on clients and server, Also net.ipv4.ip_forward = 1 is enabled on PPTP Server. How can i solve this problem .?

  Read the article

• Send all traffic over VPN connection not working Windows VPN host

  - by Adam Schiavone

  I am trying to get a mac (10.8) to connect to thru vpn to a server running Windows Server 2008 R2 pass all requests from the mac to the server. The VPN is setup and I can connect and access the server thru a web browser, but for all other sites, the DNS lookup fails. I have tried adding a DNS server to the VPN Host. ex. Lets say the the VPN server also hosts a website example.com. I connect to the VPN with my mac and point a browser to example.com and everything works fine. but when I point the browser to google.com it just sits there and will eventually come back with a DNS lookup failed message. HOWEVER: I tried running the command dig @myServersIpHere www.google.com. on the mac and it comes back with correct IP addresses. I really dont know what to do from here. How can I route all requests from my mac, thru my windows server via VPN?

  Read the article

• What's the ethos of the programming profession?

  - by mac

  I am one of those people who became professional programmer by chance, rather than by choice: I moved to a country whose main language I couldn't speak, I knew how to code... and here I am a few years later. Because of this I never really gave much a thought about the ethos of being a programmer, and working as a freelance I neither had many occasions to discuss this with fellow colleagues. Among others, Dictionary.com define the word ethos as follows: The fundamental character or spirit of a culture; the underlying sentiment that informs the beliefs, customs, or practices of a group or society; dominant assumptions of a people or period. So my question is: How would you describe the ethos of being a programmer, and why would you say so? Please note that: my question is different than this and this other ones (although you might have chosen to become a programmer because of the programmer'ethos or you might think that part of the programmer ethos is about "programming being a meaningful profession"). beside the "how/what" part of the question, there is a "why" part too! :) I would appreciate if the answer could be based not only on the idealised vision of the hero-programmer, but also on real working and life experience. Thank you in advance for your time and contributions!

  Read the article

• Ubuntu 11.04 does not detect my tata photon +

  - by nikhil

  I am trying to connect to the Internet via my photon+ from the past day and have tried various suggestions on the Internet and have tried to zero in to the main cause of the problem which is that my device is not detected. I have tried the following ways: 1) After connecting the device, I tried to create a mobile broadband connection via System Preferences Network Connections and selected tata photon plus. But there was no connection. 2) I did sudo apt-get install usb-modeswitch-data and sudo apt-get install usb-modeswitch But the prompt said that they are at their newest version. 3) I tried to edit the file sudo gedit /etc/usb_modeswitch.d/12d1:1446, but this file did not exist. 4) my lsusb output is nikhil@nikhil:~$ lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 003: ID 22f4:0021 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Any Ideas ??

  Read the article

• Where do I start in regards to making a Gnome/Unity Form Application

  - by JMK

  Ok so I am familiar with developing Form and Console applications on Windows using Visual Studio .Net with C#, but where do I start when it comes to Linux distro's like Ubuntu, is there an equivalent? How would one go about matching what they can do in a Windows environment with .Net and C# in a Linux environment without .Net coding in something like Java or C/C++? I am aware of Eclipse, does eclipse have a form designer or do you have to code the design of any Gnome/Unity forms manually? Can I use eclipse to write the Linux equivalent of a console application, that you just double click on to run? I also know about Mono, but the idea is that I want to learn how to develop software without using anything in the Microsoft stack and am not sure where to start. What is the standard language/framework used to develop these types of applications on Linux? As I become more proficient with Visual Studio, C# and .Net, it has struck me that without these Microsoft tools, I am nothing. I am only capable of developing for the Microsoft OS and this scares me. This isn't some anti Microsoft thing, Microsoft makes some incredible Software/Hardware/Operating Systems/IDE's, but it is generally a bad idea to put all of your eggs in one basket so if I want to learn how to develop Terminal and Gnome/Unity form applications where in the world do I start? I have used Linux on and off for years, but Windows has been my primary OS. However I have watched Linux get better and better and as much as I love Windows 7, I am dubious about Windows 8 (I for one will sorely miss my start menu)! Obviously MS aren't going anywhere anytime soon and I could spend the the next couple of decades developing for .Net without any issues but just because you can get away with something doesn't always mean it's a good idea. Thanks

  Read the article

• My D-Link's Ethernet bridge downlink just got 10-30x slower?

  - by Jay Levitt

  TL;DR: I unplugged my network to move my desk, and now downloading via my DIR-655's Ethernet LAN bridge is 10-30x slower than the Ethernet switch it's plugged into. Background My network is SMC cable modem <-> Cisco firewall <-> Netgear switch <-> D-Link WiFi† | | | | SMC8014 ASA-5505 GS608v2 gigE DIR-655 rev A3 gigE †The DIR-655 is used as an access point, not a router (although what D-Link calls an access point, I'd call a bridge). The "WAN" port is unused; the Netgear connects to the built-in 4-port Ethernet LAN switch, inside the built- in router/firewall. Endpoints: MacBook Pro 17" mid-2010 iPhone 4S Fedora 12 Linux server running reasonably fast dual-Athlon X2, VelociRaptors, etc. All cables are <10 feet, mostly CAT-5e, some CAT-6, all premade. All WiFi endpoints are within three feet of the D-Link. Yesterday I unplugged and rearranged stuff, and now connecting via the D-Link - even through the wired switch, right next to the incoming network cable - is 30x slower than connecting directly to the Netgear switch, on both my MacBook and iPhone. How I'm measuring "slower" I'm mostly using http://speedtest.net, which of course only really measures broadband speeds. I've also installed http://www.speedtest.net/mini.php on my local server, but can't test the iPhone with that. Results Speedtest.net, closest server over Comcast business-class: CONFIG | PING (ms) | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> Netgear | 9 | 31.6 | 6.8 Mac <-> Ethernet <-> D-Link | 8 | 4.1 | 6.0 Mac <-> WiFi <-> D-Link | 9 | 1.4 | 2.9 iPhone <-> WiFi <-> D-Link | 67 | 0.4 | 1.6 Speedtest Mini on Linux PC: CONFIG | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> NetGear | 97.2 | 76.9 Mac <-> Ethernet <-> D-Link | 8.2 | 24.2 Mac <-> WiFi <-> D-Link | 1.0 | 8.6 Slow typing in SSH: Mac <-> Ethernet <-> Netgear <-> Linux PC: smooth Mac <-> Ethernet <-> D-Link <-> Linux PC: choppy Note that D-Link upload speeds are normal on broadband, slower locally (but I'd believe that's a D-Link limitation), and always faster than the downloads! Since ssh is choppy just with slow typing, I don't believe it's a throttling-type problem either; that's not a lot of bandwidth. What I've tried Swapping all "good" and "bad" cables Re-plugging "bad" cable from D-Link to Netgear and watching it be the "good" cable pulling cables away from power lines Verify that the Mac auto-detects the D-Link as gigE Try to verify the link speed of the D-Link <- Netgear connection, but the firmware doesn't report that Verify that the D-Link sees no TX/RX errors or collisions Use different Ethernet ports on both Netgear and D-Link Reset the D-Link to factory settings Upgrade the D-Link firmware from 1.21 to 1.35NA, 2010/11/12, the latest Reboot everything at least once On the Mac, disable Wi-Fi during the Ethernet tests, and unplug Ethernet during the Wi-Fi tests Using iStumbler, verify that the D-Link isn't picking overloaded Wi-Fi channels (usually just 1-5 neighbors on my and adjacent channels, average for my apt building) Verify that the only client connected to the Wi-Fi was the iPhone Verify that nothing was being chatty on my network according to the WISH log Enable and disable all sorts of D-Link settings, including forcing WAN auto-detect to gigE So. I don't mind buying a new access point—I wouldn't mind having a dual-link network—but as a guy who's been networking since gated v4 was a drastic rewrite, and who often used physical sniffers in the days before Wireshark, I'm baffled. I hate being baffled. What could I possibly have changed that would result in this? How can I measure it? All I can think of is a static zap—thick carpet, socks, HVAC—but I didn't feel one, and does that really happen anymore? Can I test if it's Ethernet vs. TCP layer slowness? I'm not familiar with modern network utilities; it's hard to Google without hitting "Q: Why is my network slow? A: Is your microwave on?" If I don't get an answer here, will someone big and powerful help me migrate it to serverfault without getting screamed back here? In the words of Inigo Montoya, "I must know." Don't get all Dread Pirate Roberts on me.

  Read the article

• Best place to request Ubuntu for a minor improvement (In Unity dash search)

  - by mac

  Which is the best place to request Ubuntu for a minor improvement? My request feature is this : In Ubuntu dash when I search for "Upd" it gives me update manager and some other files. Now when I click enter by default the first entry will be selected. Can we make this a slightly better experience by highlighting the first item in search results which will be selected by default if we press enter - Just like in Gnome shell Search for upd in unity dash Search for upd in gnome-shell If you notice, update manager is highlighted by default in gnome shell and appears more intuitive. Can we implement the same in Unity ? Sorry for posting this in askubuntu. I just wanted to know which is the best place to discuss this. Thanks

  Read the article

• Transparent menus in gnome shell

  - by mac

  How do I make menus look transparent in Gnome-shell? In unity, I use ubuntu-tweak to do this(In ubuntu tweak , Go to Desktop-Compiz settings and then select Enable transparent menus option). Since compiz is no longer being used in gnome-shell, this is not working any more . Any alternatives ? I love gnome-shell but I am still missing some awesome features of compiz like "wobbly windows" and other desktop effects!

  Read the article

• Switching to a 7200rpm drive -> constant spinning?

  - by LINUX

  Hej Bytte nyligen HD 250GB till 640GB 7200rpm nu har jag bara ca.5 tim battery tid ... och HD snurrar hela tiden. hur kan jag sova ner Hd efter t.ex. 5 minuter ? Tack på förhand. English Translation: I recently switched from a 250GB to 640GB 7200rpm hard drive. Now I only have a 5hr battery life and the hard drive is spinning constantly. How can I spin down the hard drive for, for example, 5 minutes? Thanks in advance.

  Read the article

• Ubuntu stops using Nvidia driver after kernel upgrade

  - by Daniel

  Just updated and restarted, Ubuntu's doesn't display correctly. After restart, the desktop now looks like this. I've temporarily switched to the Nouveau driver. The update history reveals the kernel was updated, amongst many things; and the following were installed: linux-image-3.5.0-19-generic (3.5.0-19.30) linux-image-extra-3.5.0-19-generic (3.5.0-19.30) I've encountered this type of problem quite recently, so I decided to reapply the same steps, to solve the problem, as follows: sudo apt-get install linux-headers-3.5.0-19 sudo apt-get install linux-headers-3.5.0-19-generic sudo depmod -a sudo modprobe nvidia sudo /etc/init.d/*dm restart When installing linux-headers-3.5.0-19-generic, I get an error, message from terminal as follows: Setting up linux-headers-3.5.0-19-generic (3.5.0-19.30) ... Examining /etc/kernel/header_postinst.d. run-parts: executing /etc/kernel/header_postinst.d/dkms 3.5.0-19-generic /boot/vmlinuz-3.5.0-19-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. However, I ignored the above error and continued the steps with sudo depmod -a, installed nvidia-current, then did sudo modprobe nvidia, which yielded the following error: FATAL: Error inserting nvidia_current (/lib/modules/3.5.0-19-generic/updates/dkms/nvidia_current.ko): No such device Upon restart, the Nvidia driver now works! BTW, do those error messages imply I broke something? Just curious, cause I don't want to get happy I've fixed it, then it stops working later on. The system is Dell XPS-L702X, with NVIDIA GeForce GT 555M, and 17" screen.

  Read the article

• UI Controls Copyright

  - by user3692481

  I'm developing a cross-platform computer software. It will run on Windows and Mac OS X. For user experience reasons, I want it to have the same graphic on both platforms. I really like the Mac OS UI controls and I'd love to see them on the Windows version too. My question is: is it legal to "copy" UI components? I'm not going to copy icons or reproduce an existing Apple software. I would only "copy" some standard UI components such as Buttons, Progressbars, TreeView, ListView etc. You can see them here: http://i.stack.imgur.com/9YzYQ.png http://i.stack.imgur.com/MWR6B.jpg IMHO, they should not be copyrighted for two reasons: They are implicitly used by any Mac OS software There are a lot of Apps (for Windows and even Web-Apps) that are "inspired by" the Mac graphic. Am I right?

  Read the article

• I Clobbered a Leopard with a Window Last Night

  - by D'Arcy Lussier

  I’ve had my 15” Mac Book Pro for a little over a year now, and its hands-down the best laptop I’ve ever owned…hardware wise. And I tried, I really really tried, to like OSX. I even bought Parallels so I could run Windows 7 and all my development tools while still trying to live in an OSX world. But in the end, I missed Windows too much. There were just too many shortcomings with OSX that kept me from being productive. For one thing, Office for Mac is *not* Office for Windows. The applications are written by different teams, and Excel on the Mac is just different enough to be painful. The VM experience was adequate, but my MBP would heat up like crazy when running it and the experience trying to get Windows apps to interact with an OSX file system was awkward. And I found I was in the VM more than I thought I’d be. iMovie is not as easy to use for doing simple movie editing as Windows Movie Maker. There’s no free blog editing software for OSX that’s on par with Windows Live Writer. And really, all I was using OSX for was Twitter (which I can use a Windows client for) and web browsing (also something Windows can provide obviously). So I had to ask myself – why am I forcing myself to use an operating system I don’t like, on a laptop that can support Windows 7? And so I paved my MBP and am happily running Windows 7 on it…and its fantastic! All the good stuff with the hardware is still there with the goodness of Win 7. Happy happy. I did run into some snags doing this though, and that’s really what this blog post is about – things to be aware of if you want to install Win 7 directly on your MBP metal. First, Ensure You Have Your Original Mac Install Disk This was a warning my buddy Dylan, who’s been running Win 7 on his MBP for a while now, gave me early on. The reason you need that original disk is that the hardware drivers you need are all located there. Apparently you can’t easily download them, so make sure you have them ahead of time. Second, Forget BootCamp The only reason you need BootCamp is if you still want the option to boot into OSX. If you don’t, then you don’t need BootCamp. In fact, you don’t even need BootCamp to install Win 7. What you *will* need though is a DVD with Win 7 burnt on it. Apple doesn’t support bootable USB drives. Well, actually they do for Mac Book Airs which don’t come with optical drives…but to get it working you’ll need to edit a system file of BootCamp so your make of MBP is included in an XML document, and even then you *still* are using BootCamp meaning you’ll be making an OSX partition. So don’t worry about BootCamp, just burn a Windows 7 disc, put it into the DVD drive, and restart your MBP. Third, Know The Secret Commands So after putting in the Windows 7 DVD and restarting your MBP, you’ll want to hold down the ‘C’ key during boot up. This tells the MBP that it should boot from the DVD drive instead of the hard drive. Interestingly, it appears you don’t have to do this if its the Mac OSX install disc (more on that in a second), but regardless – hold down C and Windows will start the install process. Next up is the partition process. You’ll notice that there’s a partition called ETI or something like that. This has to do with the drive format that Apple uses and how they partition their system drives. What I did – I blew it away! At first I didn’t, but I was told I couldn’t install Windows on the remaining space due to the different drive format. Blowing away the ETI partition (and all other partitions) allowed me to continue the Windows install. *REMEMBER –  No warranty is provided or implied, just telling you what I did and how I got it to work. Ok, so now Windows is installed and I’m rebooting. Everything looks good, but I need drivers! So I put in the OSX install DVD and run the BootCamp assistant which installs all the Windows drivers I need. Fantastic! Oh, I need to restart – no problem. OH NO, PROBLEM! I left the OSX install DVD in the drive and now the MBP wants to boot from the drive and install OSX! I’m not holding down the C key, what the heck?! Ok, well there must be a way to eject this disk…hmm…no physical button on the side…the eject button doesn’t seem to work on the keyboard…no little pin hole to insert something to force the disc out…well what the…?! It turns out, if you want to eject a disc at boot up, you need (and I kid you not) to plug a mouse into the laptop and hold down the right-click button while its booting. This ejected the disc for me. Seriously. Finally, Things You Should Be Aware Of Once you have Windows up and running there’s a few things you need to be aware of, mainly new keyboard shortcuts. For instance, on the Mac keyboard there is no Home, End, PageUp or PageDown. There’s also no obvious way to do something like select large amounts of text (like you would by holding Shift-Home at the end of a line of text for instance). So here’s some shortcuts you need to know: Home – fn + left arrow End – fn + right arrow Select a line of text as you would with the Home key – Shift + fn + left arrow Select a line of text as you would with the End key – Shift + fn + right arrow Page Up – fn + up arrow Page Down – fn + down arrow Also, you’ll notice that the awesome Mac track pad doesn’t respond to taps as clicks. No fear, this is just a setting that needs to be altered in the BootCamp control panel (that controls the Mac Hardware-specific settings within Windows, you can access it easily from the system tray icon) One other thing, battery life seems a bit lower than with OSX, but then again I’m also doing more than Twitter or web browsing on this thing now. Conclusion My laptop runs awesome now that I have Windows 7 on there. It’s obviously up to individual taste, but for me I just didn’t see benefits to living in an OSX world when everything I needed lived in Windows. And also, I finally am back to an operating system that doesn’t require me to eject a USB drive before physically removing it! It’s 2012 folks, how has this not been fixed?! D

  Read the article

• Some info about SD card patitions after the use of the dd statment and some oiters doubts?

  - by AndreaNobili

  I am not very experienced using Linux and I have the following situation that cause me some doubts. I have wrote RaspBian (the RaspBerry linux distribution) on an SD card using Ubuntu dd statment: sudo dd if=2014-01-07-wheezy-raspbian.img of=/dev/sdb bs=1024 So if now I perform the fdisk -l statment I obtain that I have 2 partitions related to my SD card, that are the followins: Dispositivo Boot Start End Blocks Id System /dev/sdb1 8192 122879 57344 c W95 FAT32 (LBA) /dev/sdb2 122880 5785599 2831360 83 Linux And now the first doubt: the dd statment create on the SD card two partitions: 1) /dev/sdb1 that is a litle FAT32 partition (what it means (LBA)?) 2) /dev/sdb2 that is a larger Linux ext3 partition Ok...the doubt is: why it also create to me a FAT32 partition and not only a Linux ext3 partition? Ok...if I go into my computer resource I can see a device (related to my SD card) into the devices list that contains some RaspBian file, following a screenshot: And if I see the property of this device I obtain this: So, looking at the previous screenshot it seems to me that this is the small FAT32 partition, and now I have the followings doubts: If it is the smallest FAT32 partition, what contains? The RaspBian boot or what? Why, in the devices list, I have only the FAT32 partition and not also the Linux one (/dev/sdb2), to see it have I to mount it? how? Tnx

  Read the article

• How to convert an MKV to AVI with minimal loss

  - by Linux Jedi

  To convert an MKV to AVI, I do two things. The first thing I do is this: ffmpeg -i filename.mkv -vcodec copy -acodec copy output.avi This converts the MKV to an AVI, but the problem is that the video does not play smoothly for some reason. That's fine, because if I do one more thing it gets fixed: ffmpeg -i output.avi -vcodec mpeg4 -b 4000k -acodec mp2 -ab 320k converted.avi After I do this then the file plays without problem. I had success doing it this way for one file, but then I tried it on another file, and there is a slight, but noticeable loss in video quality. This is the output I get when doing the second step: FFmpeg version 0.6.1, Copyright (c) 2000-2010 the FFmpeg developers built on Dec 29 2010 18:02:10 with gcc 4.2.1 (Apple Inc. build 5664) configuration: libavutil 50.15. 1 / 50.15. 1 libavcodec 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0.11. 0 / 0.11. 0 Seems stream 0 codec frame rate differs from container frame rate: 359.00 (359/1) -> 29.92 (359/12) Input #0, avi, from 'output.avi': Metadata: ISFT : Lavf52.64.2 Duration: 00:04:17.21, start: 0.000000, bitrate: 3074 kb/s Stream #0.0: Video: mpeg4, yuv420p, 704x480 [PAR 229:189 DAR 5038:2835], 29.92 fps, 29.92 tbr, 29.92 tbn, 359 tbc Stream #0.1: Audio: vorbis, 48000 Hz, stereo, s16 Output #0, avi, to 'nidome_no_kanojo.avi': Metadata: ISFT : Lavf52.64.2 Stream #0.0: Video: mpeg4, yuv420p, 704x480 [PAR 229:189 DAR 5038:2835], q=2-31, 4000 kb/s, 29.92 tbn, 29.92 tbc Stream #0.1: Audio: mp2, 48000 Hz, stereo, s16, 320 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 I just used arbitrarily large settings on the second step and it worked nicely before but not in this case. What settings should I use?

  Read the article

• Bandwidth Problem in Terminal?

  - by Rob Barker

  I'm trying to install the Mac cursors to Ubuntu 12.04 but i get this error when using the wget command in Terminal. ubuntu@ubuntu:~$ wget -O mac-cursors.zip http://dl.dropbox.com/u/53319850/NoobsLab.com/mac-cursors.zip --2012-12-09 16:31:17-- http://dl.dropbox.com/u/53319850/NoobsLab.com/mac-cursors.zip Resolving dl.dropbox.com (dl.dropbox.com)... 23.21.195.136, 23.23.139.153, 107.20.134.231, ... Connecting to dl.dropbox.com (dl.dropbox.com)|23.21.195.136|:80... connected. HTTP request sent, awaiting response... 509 Bandwidth Error 2012-12-09 16:31:18 ERROR 509: Bandwidth Error. Can someone tell me what this means please, and a possible workaround? Thanks very much.

  Read the article

• Configure Postfix to use external MX servers for delivery of local mail if user is unknown

  - by mr.b

  I have a following setup: linux box with postfix configured to be responsible for example.com domain domain's MX servers are configured so that mail sent to example.com is sent to google mail servers several user accounts on linux machine exist (same machine also hosts example.com site) When someone from the outside attempts to send mail to address ending with @example.com, it gets routed to google mail (and there handled appropriately). When linux machine tries to send mail to outside world, mail is delivered correctly, as reverse dns and spf records are configured correctly, so linux machine is valid mail sender for example.com domain (along with google mail servers). However, here's the problem. When php application (hosted at linux box) tries to send mail to [email protected] (and someuser doesn't exist on linux box), it fails, since it doesn't even consult google mail servers, but postfix smtp locally concludes that "someuser" is unknown. So, the question is: how do I tell postfix to relay mails sent to @example.com domain to google mail servers (so, to servers specified in MX records), IF and only if a mailbox is not found locally.

  Read the article

• How do I boot the live CD on a Macbook Pro?

  - by pst007x

  Trying to install Ubuntu-11.10-64bit-MAC on a Macbook Pro. But I cannot get the live CD to load. 'C' does not work 'CMD' does not work 'OPT' no opt key CD is not corrupt and burnt using the correct iso, all checked. Installed perfectly on my Acer PC.... God I hate Apple Macs! Mac currently has Ubuntu 10.10 32bit, but i get issues with the touchpad, I read Ubuntu 11.10-mac version resolves these issues, hence the attempted re-installation... I do not have any MAC OS installed in this PC only Ubuntu 10.10. When I press 'alt' the CD does not appear in the list only my HDD, yes my CD is working fine.

  Read the article

• How to convert a video to 4:3 or 16:9 aspect ratio without loss of video quality

  - by Linux Jedi

  I uploaded my video to youtube and the highest resolution it appears as is 360p. This is much lower than what I uploaded. I believe that youtube isn't making higher resolutions available for my video because of its aspect ratio. The video is 720x400. How can I convert this to a different aspect ratio without losing any of the picture or picture quality? I don't care if blank space appears around the video so long as the picture doesn't get stretched horizontally or vertically.

  Read the article

• Survey results: Open source developer preferences

  We recently conducted a survey of open source developers to learn about their current preferences around hosting sites and source control systems.  The survey was primarily advertised via Twitter, and we tried to avoid pushing the survey among audiences that would be specifically oriented towards a particular site (for example we did not advertise the survey from the CodePlex twitter account). In total there were just under 500 responses, so a reasonable sample size although not necessarily enough to guarantee fully representative results.  One of the survey questions was what is your preferred operating system for development, and looking at the results they are particularly interesting when split by operating system preference because of how significant the difference is:   Table 1 - Preferences by what is preferred operating system for development   As you can see, the preferences among developers which prefer Windows is very different from Linux and Mac oriented developers.  Again, the question was on what operating system they prefer to use for development, and didn’t ask what type of applications they create, so presumably many create things like websites which are cross-platform from a user perspective regardless of the operating system they prefer developing with. For hosting site preference, CodePlex and GitHub are roughly tied for first place among Windows developers and combined are preferred by over 75%.  However with Linux and Mac developers, GitHub has a runaway lead over the other sites.  Perhaps not particularly surprising, CodePlex has negligible mindshare among Linux and Mac developers.  It is somewhat surprising how low SourceForge and Google Code are given historically they used to rank much higher. Looking at version control preferences is also interesting.  Among Windows developers TFS, Mercurial, Subversion, and Git all have a sizable following.  While for Linux and Mac developers it is almost all Git and Mercurial, with Git having a substantial lead.  Git is generally considered to run better on Linux and have more of a Unix feel, so not really surprising to see it more popular there compared to Windows developers.  It is surprising how low Subversion has dropped since it was the dominant preference not long ago for open source developers.  Around a quarter of Windows developers still prefer Subversion, but Linux and Mac developers have largely abandoned it.  The trend towards distributed version control systems (e.g. Mercurial and Git) is strong, with over 50% of Windows developers now prefer DVCS, and over 80% of Linux and Mac developers.

  Read the article

• Wubi on Windows 8 without secure boot?

  - by emersonhsieh

  I have a MacBook Pro. I've heard rumours that if Windows 8 is going to have this thing called "Secure boot", Wubi cannot work. At first I plan to install Ubuntu on my mac via Wubi(and windows via bootcamp), but since I can't find my Windows 7 Installation CD, I installed Windows 8 on my Mac and installed Ubuntu on a VM. Then suddenly Windows 8 Release Preview was released today so I decided to install over my existing copy of Windows 8 Consumer Preview. When I went to the Windows 8 Upgrade assistant, it said that the firmware on my Mac doesn't support Secure booting. I don't even know what it means, but since the Upgrade assistant said that the Mac cannot support secure booting, can I install Wubi successfully? And what is secure booting anyways? Any help will be appreciated.

  Read the article

• Projected trajectory of a vehicle?

  - by mac

  In the game I am developing, I have to calculate if my vehicle (1) which in the example is travelling north with a speed V, can reach its target (2). The example depict the problem from atop: There are actually two possible scenarios: V is constant (resulting in trajectory 4, an arc of a circle) or the vehicle has the capacity to accelerate/decelerate (trajectory 3, an arc of a spiral). I would like to know if there is a straightforward way to verify if the vehicle is able to reach its target (as opposed to overshooting it). I'm particularly interested in trajectory #3, as I the only thing I could think of is integrating the position of the vehicle over time. EDIT: of course the vehicle has always the capacity to steer, but the steer radius vary with its speed (think to a maximum lateral g-force). EDIT2: also notice that (as most of the vehicles in real life) there is a minimum steering radius for the in-game ones too).

  Read the article

• What platform is best for Android and iPhone development?

  - by Toy Yoda

  I've been developing non-mobile apps for linux; mainly stuff like interpreters, compilers, database engines and business apps. I've been told that if I wanted to learn how to develop iPhone/iPad applications, I should buy a Mac since Apple has all it's development tools for iPhone/iPad on Mac. Now, what about Android phones / tablets? Are the development tools better on Mac or PC? I need to buy a new laptop, and I would like to factor in mobile development in my choice of PC or Mac.

  Read the article

• How to integrate ubuntu one in pcmanfm (Lubuntu file manager)?

  - by mac

  I have installed ubuntu-one on a Lubuntu machine and indeed the file syncing works for all the folder that are shared. My problem is that while on my ubuntu machine I can right click a folder and mark it as shared, I could not find a way to do the same under pcmanfm. The only workaround I was able to find is to use the daemon via command-line: u1sdtool --create-folder . which works but is kind of clumsy.... any way to integrate in the GUI?

  Read the article

• Any learning/studying material for C/C++ that use game programming as learning context out there?

  - by mac

  As most of game programming is done - I read on this very site - in C/C++ I was wondering if there is any learning/studying material for C/C++ that would target specifically game programming. I am not looking for material about "developing games" or "software architecture for games", but rather for material that uses "game programming" as the CONTEXT for introducing and illustrating C/C++ features, idioms, programming techniques, etc... With a simile: think to the GOF book on design patterns. There, they used "developing a text-editor" as a context for introducing design patterns, but the book is most definitively not a book about "developing text-editors". Thanks in advance for your time and advice! PS: My background: I am a programmer with a solid experience in OO scripting languages and only some experience in C and Assembler (on AVR microcontrollers), so I am thinking to mid-to-advanced level material, rather than tutorials for beginners, although it might be interesting to take a look to the latter ones if nothing else is available.

  Read the article

< Previous Page | 719 720 721 722 723 724 725 726 727 728 729 730  | Next Page >