Search Results

Search found 2415 results on 97 pages for 'asus motherboard'.

Page 73/97 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• Is a "Soft Modem" (i.e. internal) really going to cause incompatibilities?

  - by Farseeker

  Thanks to the fact that our banking industry in Australia... outdated (which is the politest word I could think of when describing the banking industry)... to do a certain kind of transaction our bank requires us to use a dialup modem and send serial data to them. When reading through their documentation (last update: 1995), they state that any "Soft Modems" (by which I assume they mean internal modems, as they refer to a AMR socket on a motherboard, which I haven't seen in donkeys years) should not be used because of "possible incompatibilities" Seeing as buying an external, serial-port modem is actually quite expensive these days and I have a whole box of PCI modems taken out of a bunch of Dells I really don't want to have to buy an external modem. Additionally I think their documentation is simply outdated. Has anyone had experience with internal modems causing issues, where an external modem didn't?

  Read the article

• Home router for higher network loads

  - by Zizzencs

  I'm trying to find a replacement for my ASUS WL500GP router. Some constraints: my ISP now provides 120 Mbit bandwidth - the router must be able to handle it I have 3 computers and a laptop at home - the router must have at least 4 LAN ports and the WAN port I need to be able to do the following in parallel: use bittorrent with ~1000 connections transfer files from one home computer to another at high speed access one home computer from my workplace I don't really need wireless I don't really want two boxes to serve all these purposes. So I was searching for a router with 1 Gbit ports, jumbo frame support and good reviews, but haven't really found a promising candidate so far. Any suggestions?

  Read the article

• Games + Closed Lid = Hibernation

  - by Isaac Rabinovitch

  I have an ASUS N53S that I mainly bought for its RAM capacity. (I run a lot of VMs.) But as a bonus, it came with a fancy ATI video card. So I decided to install GTA 4 and plug it into a big monitor and settle down for some casual mayhem. But after about 5 minutes, it goes into hibernation! What gives? Since I was using an external monitor and didn't need the keyboard (using an XBox controller) I closed the lid on the laptop. Gaming is compute-intensive, so my GPU and CPU were both working hard and generating heat. Closing the lid interfered with cooling. Since I have the laptop configured to hibernate when I press the power button, the heat-triggered shutdown caused hibernation.

  Read the article

• Memory works fine separately, but not together

  - by patersonjs

  I've been given four 1GB Corsair DDR2 memory modules, and am trying to fit them into my computer but am getting BSOD on Windows XP and errors in Memtest86+. I've tried to identify if one particular module is faulty by trying them in pairs. They work fine in pairs, but when all four are inserted, Memtest86+ reports errors. The motherboard is an Asus P5N-E with dual channel support and the modules are all the same model (same speed, capacity and timings) but one pair is a different hardware revision. One is v2.1 and the other is v2.2... the voltages are the same too. Would this minor difference be a possible cause of the problem? I've got the BIOS memory timing settings all at AUTO - should I manually set the timings?

  Read the article

• How to expand Raid 5 on ICH10 - Gigabyte ex58-ds4?

  - by NeverEatAlone

  I was wondering if there is a relatively simple way to expand my HD space. My setup is 4 x 640 GB drives. Motherboard has 4 ports on 1 controller and 2 ports on another controller, however they cant be joined. I would like to somehow get more store space in raid configuration. One scenario that I can see working is replacing one 640 drive for a 2TB drive. Waiting for Raid to rebuild. Rinse and repeat. However, I have no idea if I would be able to even see/access the new space. All alternatives / ideas are welcome. Thank you

  Read the article

• Dell Precision 670 no booting

  - by fristson

  Our dell running xp did not boot one day and was making a beep code I had a hard time finding on the internet. It was one of the RAM sticks so i replaced it. Before that i removed the motherboard battery to see if there was a problem with the battery. Now at start up it tells me that No Logical Drives Found and then BIOS not installed!. I have read over alot of post here and other places but everyone is talking about installation of the OS. I just want it to start with what it had. Please help.

  Read the article

• Why can't I open programs after watching youtube videos for a while?

  - by manjivsanotsu

  I have recently built a new PC, and it worked fine for a while (1-2 months of no problems whatsoever). However in the recent weeks I noticed that after I watched some youtube videos and closed everything, I can no longer do anything except move the mouse and expand the Startup Menu. If I click on any of the programs on the Start Menu or type a program on the Run text box, it won't open anything. I can't open taskmgr, or windows explorer, or even shut down the PC. I don't have anything else running when I'm watching videos except ZoneAlarm and Avast. The only workaround I can do when this happens is a forced shutdown (holding the power button of my PC), and restart if I wanted to do anything more. But this happens a lot - about 4-5 times a week so I'm worried it would fry up my hardware if I keep on doing this. OS: Windows 7 Other Installed Software: Open Office, Tropico 4 game, Adobe Photoshop Browser used: Google Chrome Hardware: CPU: i7 2600K RAM: 16 GB Motherboard: Asus P8Z68-V GEN3 Hard Drive: 120GB Corsair Force GT SSD Graphics: 2047MB GeForce GTX 560 Ti

  Read the article

• what are the rules for SLI ( GTX 550 Ti )

  - by equivalent8

  I got ASUS GTX 550 Ti and I want to SLI it with another graphic card. I heard that not all graphic cards are good idea to SLI, (or not all combinations) because sometimes the final performance could be even worse that with one graphic card. Is that true? What are the rules ? ( maybe chip-set needs to be same or something ? ) I was wondering if you can recommend me what Graphic card should I use as with mine. Should I use same one (GTX 550 Ti) ?

  Read the article

• How to get headphones and speakers working at the same time?

  - by Borek

  I have a Gigabyte P55-UD3 motherboard which comes with a Realtek sound card and audio header for the front panel. My headset is permanently connected to the front panel (mic in, headphones in) and I also have speakers connected at the rear of the computer. What I want to achieve is that both the headphones and the speakers work at the same time. On my old PC with Realtek, I was able to do this by clicking "Device advanced settings" in the Realtek HD Audio Manager and then clicking "Make front and rear output devices playback two different audio streams simultaneously" and then doing some reassigning of front/rear settings in the Realtek Audio Manager (can't remember the details). But that doesn't seem to be working now - either the speakers play sounds or the headphones, not both at the same time. To pose the question differently, Windows plays the sounds on the "default device". I'd like to make both headphones and the speakers kind of like the default devices.

  Read the article

• PC reboots instead of shutting down, no software problem. What could be the cause?

  - by DaVinci

  Hi, first of all: I'm not sure if superuser is the right site for my question and google didn't help. I have a pc here that prefers rebooting to shuting down. Everytime I try to shut the pc down it reboots, however it is possible to turn the pc off by pressing the power button. The problem is not windows-specific, the Ubuntu LiveCD does exactly the same that's why I said that it is no software problem. I checked wake on LAN, it is disabled and I also resetted the BIOS settings to factory default. That might not mean that it can't be a BIOS problem but I don't know what else to try here. I did not check any hardware yet but nothing exploded so far. I don't know what could have caused this behaviour as it is not my PC. The Mainboard is a ASUS P5Q-E P45.

  Read the article

• Windows XP crashes by GT610 driver (nv4_disp)

  - by undone

  I have a PC which was working fine but one day screen went dark and nothing was shown. I thought the problem is graphic card, so I replaced it with new one. I bought a new graphic card (GeForce 610) and installed it on my system. I formatted my hard-drive and installed a fresh Windows XpSp3 and its drivers. Everything was fine but after installing graphic card's driver, I got an error saying windows got stuck in an infinite loop and it couldn't get out (in nv4_disp). I uninstalled it and downloaded its last version and installed it. Unfortunately, I got the same error and windows restated! Here's my system: Pascal Motherboard PT880PRO Intel CPU Windows XPSp3 I searched this issue on the internet and I found bunch of suggestions (from cleaning hardware to installing latest version of its driver) but nothing help! Any help would be appreciated! Thanks.

  Read the article

• How can I re-program/flash a backup of the bios?

  - by user285705

  I have some computers that have a particular bios setting that keeps everything running smoothly. The setting is not the default setting for the motherboard. So, when the CMOS battery dies, the setting is erased and causes the user problems. How can I backup the bios and settings I have now, and flash that file onto my entire stock of computers? I have attempted to use awdflash to backup my bios and then attempt to write that backup to the ROM chip, but I keep getting an error. It tells me that my file number doesn't match the system, or something like that. Basically, the file is incompatible with the chip. But I just backed it up from that chip. If anyone can shed some light on this for me it would be helpful.

  Read the article

• Missing kernel on debian-testing-amd64-DVD-1

  - by Kyrol

  I want to install the Debian testing linux version. But at a certain point of the installation, an error occurs: Impossible to install kernel. a compatible kernel version is missing... … or something like that. I see that the image ISO of the DVD is less than 4GB, but is impossible that there is no compatible kernel version for the system. I have an Asus X53Sc with Intel core I7-2630QM, Geforce GT 520MX.

  Read the article

• How can I create a bootable CD-ROM/USB Drive? (With NTFS + USB Drive support)

  - by RonK

  My motherboard got fried and I was forced to get a new hardware set (MB+CPU+RAM) so in most likelyhood I'll need to reinstall my Windows 7. I usually follow procedure and put the OS on the primary partition and my data on a logical partition - so I can format the primary without concern - but this time I made a mistakte and left some crucial items on the primary partition. I want to create a bootable CD-ROM/USB Drive which can read NTFS so I can access this data. If booting via a CD-ROM, I would prefer being able to connect a disk-on-key/My Passport to the computer and be able to access it to transfer the data to it. How can I do it? (free 3rd party applications are most welcome)

  Read the article

• Why is my PC boot time slow when USB HDD attached?

  - by John

  I have a USB Hard disk that I am using as a secondary drive just for extra storage. When this is attached and I start my PC the second screen says searching for mass storage dives for about 5 minutes before continuing on. The same happens when I have a USB pen disk attached upon boot. If I attach the device after the PC has loaded then it is very quick however plugging and unplugging is not ideal. Is there away to disable this in the BIOS as I cannot instantly see an option. On boot it informs me I have an American Trends AMIBIOS in the BIOS setup it states the version as v02.58 2006. This is running on a ASUS MV2 Motherboard.

  Read the article

• Dual 9500GT video cards, one works

  - by bossDub

  I have two video cards, both are PCIe 512MB Nvidia 9500GTs. One is an Evga and the other is another brand. If I put them both in, the one in the top slot will work (either card). The one in the lower slot says Code 12, not enough resources to use this device. I've tried disabling Firewire and a few other things in an attempt to get more "resources". Intel DP45SG motherboard. 4G Ram. 64bit Vista. Q8200 CPU. I do not have the SLI connector.

  Read the article

• Netbook won't boot after using EasyBCD

  - by TNC

  I have an Asus T91MT netbook on which I used to have Windows 7 Home Premium and Ubuntu 10.10 installed (dual boot). After trying to upgrade to Ubuntu 11.04, Ubuntu is no longer able to boot, so I tried to uninstall Ubuntu completely and then reinstall it. Following these directions, I tried using EasyBCD to bypass the GRUB2 bootloader so that after uninstalling, it would automatically boot into Windows 7. However, after doing the "install BCD" step and restarting, I got the following message: Windows failed to start... File: \Boot\BCD; Status: 0xc0000098; Info: The Windows Boot Configuration Data file does not contain a valid OS entry. I'm currently trying to create a USB stick of the Windows Installation disc but in the mean time, I can only boot from a Ubuntu USB stick. Is there anything I can do from within Ubuntu to fix this? Or does anyone have any other suggestions/solutions?

  Read the article

• Is my laptop good enough to support my development needs? [closed]

  - by KodeSeeker

  I have an ASUS Pentium-R Dual Core CPU running at 2.20Ghz. It has 4 gb of built in ram, currently running a 64 bit Windows 7 . I just started graduate school and Im wondering whether I should go in for a new laptop or just repair the nagging battery on my current one. My requirements include - -Ability to support IDE's - I may end up running Eclipse, Visual Studio's and the like to help with my work. - Ability to run multiple VM's (not concurrently). Im currently running a Ubuntu 12 and 9 as VM's (not sure if this is overloading the system) - I'm a non gamer so I really dont care about a minor glitch caused by running a uber heavy game. -In addition I will have heavy use of Office Application Software and will be using my computer to watch movies and stream media. Looking forward to your replies and suggestions!

  Read the article

• Does RAID negatively affect non-RAID devices?

  - by Django Reinhardt

  I am running Windows 8 on an SSD, and it's all running swimmingly, but I want to store documents on two HHDs (not SDDs) running under RAID 1. My motherboard has two SATA controllers, both set to AHCI. On the 3GB/s controller, all four ports are used (1 Bluray Optical Drive, 1 Spare HD, and the 2 I wish to turn into a RAID 1 drive). Windows is on the 6GB/s controller. Like so: So my question is: If I turn these four ports (on the 3GB/s controller) into a RAID controller, will that negatively affect the non-RAID hardware plugged into it? I.e. Will the HDD or Bluray drive be slower/incompatible with being plugged into a non-AHCI controller? Thanks.

  Read the article

• Readyboost on Windows 7 x64

  - by RobLaw84

  I'm thinking of bying 1 or more flash drives or an SD card to use with the readyboost function on by 64bit Windows 7 machine. I have a few questions regarding it before i put my hand in my pocket and buy anything. If i go ahead I would be using the fastest available flash/SD. I have 6GB of RAM current installed so will readyboost make any difference to boot / program load times? Will 2 x 2GB flash drives be quicker than 1 x 4GB or is the limitation on the motherboard? Would an SD card better than USB flash drive? thanks

  Read the article

• No audio driver for ECS 7050-M v1.0a for Windows 7?

  - by NudeRaider

  I have an Elitegroup 7050-M v1.0a motherboard and I've used the Realtek HD audio driver it came with for years under Windows XP. There was a nice mixer panel, an equalizer and sound profiles that added effects. All of these menus are gone now that I've moved on to Windows 7 64 Bit. All I have is the basic settings under system control - sound, but they are not nearly as detailed. To clarify: Sound works, but the advanced settings I got when using older OS's are gone. Older drivers don't seem to work under Win7 and I can't find one for Win7. So how can I fully utilize the capabilities of my HD sound chip under Win7?

  Read the article

• Can I install linux has the host in a dell poweredge server (r710)?

  - by bksunday

  I might have a deal on dual six core poweredge server and I'm about to go test its performance but I'm wondering few things which I can't find answers for, and I can't test them before buying the machine. I don't want vmware at all so can I just wipe it and install linux instead, or is it embedded in some parts I have no access to. Will I still be able to update different firmwares (perc controllers, motherboard, etc) on this dell poweredge or does it require to have the vmware esxi installed as the host os. And optionally.. is there any foreseeable problems in doing so?

  Read the article

• Possible? OpenVPN server requiring both certificate- AND password-based login (via Tomato router firmware)

  - by Eric

  I've been using Shibby's build of Tomato (64k NVRAM version) on my Asus N66U router in order to run an OpenVPN server. I'm curious whether it's possible to setup this OpenVPN server to require both a certificate AND a username/password before a user is allowed access. I noticed there's a "challenge password" entry when filling out the certificate details, but everyone says to leave it blank "or else"; I have no idea why, and I can't find an explanation. In addition, I've Google'd this issue a bunch and have noticed people talking about a PAM module for OpenVPN in order to authenticate via username/password, but that appeared to be an either/or option; in other words, I can force authentication via username/password OR certificate. I want to require both. Is this possible? If so, how?

  Read the article

• Issues with new graphics card and drivers

  - by Ortund

  With my onboard graphics card (Intel HD 4000) I was able to use 1680x1050 screen resolution. Using the same screen and an Asus ENGTS250 graphics card with 296.10 drivers installed, I'm not able to use that resolution anymore. Also, I've been having other trouble with driver installations. Using 340.52 or 337.88, I can't boot into Windows 7. I see the Windows Welcome screen and then the screen goes black, loses signal and the computer locks up. I think the drivers issues and the resolution problems go hand-in-hand. I have a feeling I could use a newer driver than 296.10 which would give me access to use the 1680x1050 resolution I want to use, but I'm terrified that if I update or install another driver, that the computer will lock up again. Can anyone recommend a [better] driver for me to use?

  Read the article

• Monitor does not turn on until reset

  - by eggonlegs

  I have a system with an ATI 4870 hooked up to a Samsung P2350 using DVI. My motherboard is a GA-EP45 DS4P with the latest BIOS. The situation is: I turn on my PC (with the power switch) I get a blank screen I hit reset and the PC boots up normally, i.e. the monitor turns on and This has been the case for a couple of months (Was away for a while, came back and it was the same case). I was hoping the situation would somehow fix itself but alas, nothing. I have tried numerous settings in the BIOS (Combinations of different settings of the ACPI and power saving options) and have tried different cables. Has anyone experienced this before? I don't know where to go from here. It is pretty infuriating because it means I can't put my computer to sleep, as the monitor won't come on. Any help is appreciated. Thanks

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >