Search Results

Search found 2489 results on 100 pages for 'hp laserjet'.

Page 73/100 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• Audio recording background noise

  - by Sergey

  For a long time time I've been trying to get rid of the background noise that appears in every audio recording I make with my computer. Tried different microphones, different sound setting, drivers. Interesting fact - the volume of this sound is equal whether I use and internal notebook microphone or an external one. I tried really good mics, so I'm sure the problem is not in it. Laptop on which this problem appears in HP Probook 4720. OS - Windows 7. P.S. Read an answer to a similar question: Annoying sound from microphone in headphone. Tried everything that was mentioned there. Only I don't have a "DC Offset Cancellation option". And when I disable "Noise Suppression" and "Acoustic Echo Cancellation", noise only becomes more noticeable. What should I do? EDIT: Example of the background noise I'm describing: http://eos-soft.com/files/noise.wma.

  Read the article

• RAID across SAS controller ports

  - by BlueGene

  Hi, I'm managing a HP DL360 G5 machine. It has a SAS controller with two ports. Port 1 is attached to 4 drive bays and Port 2 has 2 bays. The machine currently has 3 drives connected to Port 1 with RAID 5 configuration. I'm trying to max out the bays by adding 1 disk in port 1 and 2 in port 2. Can I group those three disks(1 disk-port, 2 disks-port 2) in a RAID 5 configuration?

  Read the article

• force other screen on boot

  - by PaoloFCantoni

  I have a multi-boot Windows 7 (32bit & 64 bit) on my HP Notebook. Unfortunately, the Notebook screen has been trashed (due to daughter dropping it). So I have attached a second screen. On the 64 bit system, after windows has started, the logon screen comes up on the 2nd monitor just fine. On the 32 bit system, the logon screen still comes up on the Notebook monitor and I have to open the lid, and shut it so that it then switches to the attached screen. In both cases the display has been set to only display on the attached screen (ie if I "identify" the attached screen says: '1'). Is there any setting I can use to force the OS to use the attached screen? TIA, Paolo

  Read the article

• Building uEFI bootable ISO and USB for Windows 7 deployment

  - by Darragh

  I have been trying to build up a window's 7 and 2k8 EFI deployment ISO or USB. But struggling to to even get an ISO to boot from even VMware Workstation EFI implementation. The problem is there is no clear requirement to what the EFI bootloader is looking for, "e.g EFI boot file" even ISO's and USB's that are bootable don't find the required .efi file. I'd like to know what is the process EFI bootloader follows to boot the EFI file. e.g; in a EFI windows system its; C:\Windows\Boot\EFI\bootmgfw.efi From DVD it's; F:\efi\microsoft\boot\cdboot.efi from what people tell me it's on USB; G:\efi\boot\bootx64.efi (bootmgfw.efi renamed) I've been testing on a HP notebook with EFI 2.0 and VMware Workstation 8.0 with .vmx file firmware = "efi"

  Read the article

• Problems Installing Windows Server 2008 R2

  - by ProfKaos

  I've just finished 3 day download (with breaks) of Server 2008 R2, and am very eager to install it on my dev machine (my laptop, an HP Pavilion with a 2xTurion 64 cpu). If I mount the ISO and try and run Setup.exe, I get told Setup.exe is not a valid Win32 application. I tried burning the ISO to DVD (as files), but my machine wont't boot from DVD. If I re-insert the DVD, so that autorun comes into play, I get told something like "the setup is not valid for this version of Windows" Any suggestions as to what I might try, either to diagnose the problem, or to avoid it?

  Read the article

• Change location of RSS Dynamic Desktops

  - by Andy

  I'm currently using CCleaner to take care of my computer, but I also have a dynamic desktop background provided by Bing (I'm running Windows 7 HP) - and unfortunately the two conflict. Whenever I 'clean' my computer using CCleaner it messes up my destop backgrounds as they are stored in the temporary internet files directory, and for some reason I don't appear to be able to get as far as the 'Enclosures' sub directory in order to tell CCleaner to exclude the directory (I can see it in Windows Explorer but not in CCleaner's directory browser). Therefore, I am looking for an alternative solution to this problem and wondered if I could change the directory to which the images were downloaded on the RSS feed. If anybody knows how to do this, I would be grateful if you could share or indeed, I would be equally as greatful if anyone knows any other ways of getting around CCleaner. Please note that I don't want to stop cleaning the whole of my temporary internet files though - I just don't want the wallpapers that have been downloaded to be deleted... Thanks in advance!

  Read the article

• SAN alternative for VMWare

  - by CogitoErgoSum

  Has anyone utilized something aside from a SAN to run their VMWare images off? We are looking to drop in two HP Servers and VMWare on them and run them off a SAN. Due to the cost of SAN though our CFO and VP are wondering if there are any viable alternatives (I.e. NAS) that can effectively run a VMWare. I can't think of any off of the top of my head. IF anyone can provide one or a good article outlining why to stick to SAN that'd be great.

  Read the article

• Install Windows 8 64-bit over the top of Windows 8 32-bit

  - by Andrew Gee

  I currently have Windows 8 32-bit installed from MSDN (I didn't realise at the time that my processor supports 64-bit). I understand that you can't upgrade within Windows 32-bit to 64-bit directly from the ISO. I have burned the ISO to a DVD, and have attempted booting from this drive. The problem I am encountering: The operating system couldn't be loaded because a required file is missing or contains errors. File: CI.dll Error code: 0xc0000221 You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. Additional info: Computer: HP Pavillion m9280.uk-a Processor: AMD Phenom 9600 Quad-Core RAM: 3 1GB sticks Thanks in advance!

  Read the article

• BIOS password and hardware clock problems

  - by Slartibartfast

  I have HP 6730b lap top. I've bought it used and installed (Gentoo) linux on it. BIOS is protected with password, and guy I bought it from said "I've tweaked BIOS from Windows program, it never asked me for password". I've tried to erase password by removing battery, but it's still there. What did get erased obviously is hw clock. This is what hapends: a) I can leave lap top in January 1980 and it works b) I can correct system time, but boot wil fail with "superblock mount time in future" from where I need to manually do fsck and continue boot c) I can correct system time and sync it with hwclock -w but than it will behave as b) and it will reset BIOS time to 1.1.1980 00:00 So I need either a way to bypass a BIOS password (wich after lot of googling seems impossible),a way to persist a clock, or a setup that will enable hw clock in eighties, system clock in present time and normal boot.

  Read the article

• Monitoring over Time with Nagios: How?

  - by David

  Nagios in its standard usage monitors with point-in-time checks: either something is - or is not - true. Other tools like SGI's PCP, HP's MeasureWare, and SEC provide monitoring over time - monitoring things like average disk access time over the last five minutes, or other similar items. Is there anything like this for Nagios? I'm already running NDOUtils, which seems like a natural source for such data. I'd like to have something that would monitor and fire off alarms based on a time-based check using historical data. Is there anything like this for Nagios?

  Read the article

• Micro sound breaks/interrupts on Windows 7

  - by cand

  Hello all, I've been experiencing strange behavior recently. When listening to mp3 or watching movie or whatever that uses sound, I get micro breaks in sound. It's like it hangs or cuts a fragment for about 0.5s. When I start OS, it's ok, but as time passes it gets worse, to the extent that music is unlistenable being interrupted every 2 seconds. I haven't found any relevance between this behavior and hardware usage, I don't think it's directly related to HDD (or it might be but with significant delay). I have updated soundcard drivers and it didn't help a lot. My system is Windows 7, computer is simple HP laptop, nx7300-Ru374ES with WD Caviar Scorpio Blue hard drive inside and integrated soundcard on it (I can check the model later if it's important). Did anybody encounter such problem ? Maybe it's a common thing on Windows 7 or someone knows how to solve it? Thanks in advance.

  Read the article

• Plus signs appearing in Google searches

  - by emddudley

  Ever since Google implemented their new look at the beginning of May, I have been having trouble with their search engine changing all of the spaces in my query to plus signs. This behavior occurs when I use the search box in both Firefox and Internet Explorer. For example, if I search for google search plus signs I am taken to the following URL, where google+search+plus+signs is in the search box. http://www.google.com/search?q=google+search+plus+signs&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a However if I perform the search from google.com, I get taken to a different URL with google search plus signs as I'd expect: http://www.google.com/#hl=en&source=hp&q=google+search+plus+signs&aq=f&aqi=g1&aql=&oq=&gs_rfai=&fp=d2a3ca21987adb1 Do I need to update my browsers or something?

  Read the article

• BSOD on windows 7 with SSD during boot after improper shutdown

  - by Bob

  I have a BSOD on windows 7 with SSD during boot after improper shutdown (while windows animation logo is moving). The computer restart imediatly after BSOD, and windows proposes to launch startup repair (if i do it, it takes +-5min and fixes the problem : computer starts normally). However, after any new improper shutdown, i got the same problem. Remarks: If i unplug, re-plug the SSD whyle system is shutdown, i have the same problem. If i reproduce the situation with old HDD, i havn't the problem Previously, i had a different problem: BSOD when waking up after sleep, which was fixed by installing drivers (ethernet, usb, graphic card) I have made ram chech and ssd check and found no problems Starting with safe mode after improper shutdown causes a BSOD at loading of classpnp.sys Configuration: System: HP compaq 8510p SSD: OCZ vertex-2 2.5 Boot options: SATA native mode - Enable, HDD transalation mode - LBA-assisted

  Read the article

• Nagios Check_hpjd giving me problems!

  - by Mister IT Guru

  When I run the following [root@host plugins]# ./check_hpjd -H printer1.mydomain.com : Timeout from host printer1.mydomain.com I have Net-snmp installed on my system, I noted that i didn't have net-snmp-utils installed, and then I was able to run [root@host plugins]# snmpwalk -Os -c public -v 1 printer1.mydomain.com system sysDescr.0 = STRING: HP ETHERNET MULTI-ENVIRONMENT sysObjectID.0 = OID: enterprises.11.2.3.9.1 sysUpTimeInstance = Timeticks: (325408663) 37 days, 15:54:46.63 sysContact.0 = STRING: sysName.0 = STRING: printer1 sysLocation.0 = STRING: sysServices.0 = INTEGER: 72 So I know that the printer is working as expected, (as far as SNMP is concerned). But when I run [root@host plugins]# ./check_hpjd -H printer1.mydomain.com -C public Error in packet () I get this error - From what I've tried so far, I know my host can communicate via SNMP, I know the printer responds via SNMP, so I guess I'm left to look at the plug-in, which I will be checking up on. I'm new to SNMP, I am investigating this with my good friend Google search, but I am on a learning curve here, so please forgive my questions if they sound stupid,

  Read the article

• How can I make my monitor run at it's native resolution under Kubuntu 9.10?

  - by Adam Matan

  Hi, I have installed Kubuntu 9.10 afresh on an HP desktop computer with a Samsung SyncMaster 2243 and Intel integrated graphics card. The screen resolution is fixed on 1280x1024 instead of the native 1680x1050, which makes my eyes bleed. $ lspci -k |grep "VGA" -A2 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) Kernel driver in use: i915 Kernel modules: i915 and my xorg.conf: /etc/X11$ cat xorg.conf Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection Any ideas how to make this driver work? I found no working solutions on Google searches. Thanks, Adam

  Read the article

• IBM BladeServer Chassis compatibility

  - by Matt

  Hi, I'm looking at buying a 3 year old blade server. My question is, if I buy it and want to insert a current model blade, will it fit? Also, if the chassis goes "POP" and I need to replace it, will the current model chassis fit 3 year old blades? What about Power supply replacements? The chassis I'm looking at is this: IBM FRU / PN: M8677-3XM with DVD reader The blades are all IBM HS20's. We've had a good run with IBM hardware and although there is some nice ex-lease HP hardware available, my understanding is that backwards comparability is not so well maintained. Is this true?

  Read the article

• Intel video driver upgrade now makes my external monitor display red-only with HDMI cable.

  - by Eli

  I have an HP G60 notebook with a Mobile Intel 4 Series Express Chipset video display (Driver version is 8.15.10.2021). OS is Win7 Home Premium. I also have an LG widescreen display that I was connecting to the laptop using an HDMI cable. It was working great, until I applied an Intel 4 Series Express Chipset update from Windows Update. After the update, if I plug the laptop to the monitor using the HDMI cable, it appears I only get the Magenta channel, cause that is all I see. If I connect with the VGA cable, it works fine. So, is it possible it is just the HDMI cable (which IS cheap in this case - fire sale at Blockbuster), and not related to the video driver update at all?

  Read the article

• Capture RTSP stream from IP Camera and store

  - by Keerthi

  I've got a few IP Cameras which output an RTSP (h264 mpeg4) stream. Hitting the URL locally via VLC: rtsp://192.168.0.21:554/mpeg4 I can stream the camera and dump to disk (on my desktop). I'd like to however store these files on my NAS (FreeNAS). I was looking at ways to capture the RTSP stream and dump them to disk but I'm unable to find anything. Is it possible to capture the stream on FreeBSD or Linux (RaspberryPi) and dump the streamed content to a disk local to Linux or FreeBSD - preferably every 30minutes? EDIT: The NAS is headless (HP N55L or something) and the RaspberryPi's are headless too. I've already looked into ZoneMinder but need something small. I was hoping maybe using Motion to detect motion on the stream but that will come later.

  Read the article

• RGB to DVI adapter not working for Projector-to-PC

  - by user897052

  We have a wall-mounted projector (dell 4320) with VGA In and the other end of the cable is RGB. We have an RGB to DVI-I adapter (w/ DIP switches) inorder to plug the cable into a PC (video card has 1 VGA and 1 DVI-I port). We had no problems until recently, when the PCs hard drive crashed. After re-imaging the PC, the computer no longer "sees" the projector (the computer doesn't detect the projector as a second monitor anymore). The PC is an older Dell with an after-market video card and runs win XP. I also tried it on a new HP box (win 7), but had to add a DVI-I to DVI-D adapter. Any ideas?

  Read the article

• Why does Windows 7 need hardware virtualization to run XP mode?

  - by Ken Pespisa

  I have a MacBook Pro and I've run VMware Fusion's unity mode and Parallels' cohesion mode along side the Mac OS X, and both work pretty seamlessly. I figured XP Mode in Windows 7 would be something similar, but I then learned my machine requires hardware virtualization support, which it does not have. My machine is an HP dc7800. That's a dual core 2.2GHz machine with 4GBs of RAM. Certainly it has the horsepower to run a virtual environment alongside the primary OS. I'm wondering: 1) Why Microsoft decided to make hardware virtualization a requirement and 2) What am I missing? Is the experience similar to Parallel's cohesion mode / Fusion's unity mode? Thanks!

  Read the article

• Synaptics/usb mouse drivers data is invalid on win server 2003

  - by the wonderer

  Have just installed windows server 2003 image onto an HP laptop. Cannot get the mouse drivers to work. Have the correct drivers because I've extracted them out of a working PC (exact same model). I am always getting "Data is invalid". This is the synaptics touchpad drivers. Does anyone know how to fix this/ workaround to get mouse working? I have heard it may have something to do with permissions in the registry?

  Read the article

• Logitech M185 Wirless Mouse issue

  - by Elliot Harrison

  An issue with a Logitech M185 mouse today. A user is unable to use the device. The device works perfectly fine on my PC (It appears as HID-compliant mouse), but not on her laptop. It does not appear in her device manager on the 'Mice and other pointing devices' section. I did notice an unknown device in the Universal Serial Bus Controllers section, but when I try to update the driver, it says it has the most up to date driver. We've tried plugging in the dongle in multiple USB slots but no luck. Any advice? It's a HP 620 Laptop on Windows 7. Thank you :)

  Read the article

• Can't add printer on Windows XP

  - by SuperFurryToad

  I've added a HP 4250 printer to about half a dozen Windows XP PCs in our office without any problems whatsoever, but for some reason I haven't been able to add it to one particular PC today. I go through the Add Printer wizard to add a local printer attached to the PC, enter the new port number as a Standard TCP/IP Port, install the driver. At the end of the wizard I get the following error message: Full error message: "windows cannot connect to the printer. either the printer name was typed incorrectly, or the specified printer has lost its connection to the server." This doesn't make any sense as I am able to ping the printer from the PC. The print spooler is running, and any firewall software on the local PC is switched off.

  Read the article

• Which network performance management software do you use?

  - by Jamie Keeling

  Hello, I am looking at the various options available for network performance management software, some of the solutions I've found so far are: Proprietary: HP - ProCurve Universal: SolarWinds - Orion Open Source: OpenNMS I am trying to discover the benefits of each package over the other and reasons as to why you would go for one (Such as size of the network, overall cost etc..). I'm curious as to which ones other people use and why? Each customer has their own needs and requirements and it would be great to hear some of yours. Thank you for your time.

  Read the article

• CA ArcServe r11.1 - have to switch Tape Drive Offline then Online to finish backup

  - by Richard

  Ill keep it brief, I have an HP Ultrium 1 in a server currently running CA ArcServe r11.1. I have 5 daily backup tapes, each of which are new. 3 of the 5 work fine without intervention but 2 of them stop at varying points through the backup asking for a new tape, even though that tape is not full. The way I have found around this is to switch the tape drive offline for 10 minutes then switch it back online, whilst the backup is still running. Has anyone ever seen this before? If so, any ideas how to permanently fix this. If all else fails just some pointers in the right direction. Thanks

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >