Search Results

Search found 5457 results on 219 pages for 'necessary'.

Page 73/219 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• VMware two vSwitches Guests can't communicate between them

  - by Aaron R.

  I have some servers in this configuration: And I am not able, from VMGuest1, to ping either VMGuest3 or VMGuest4. I can, however, ping Host1 and Host2, which are attached to pSwitch1. The behavior is the same with VMGuest3 or 4 trying to ping VMGuest 1 or 2. I don't have promiscuity enabled for any of these switches, nor do I have a bridge set up inside ESXi for the virtual switches. I know that one of these options is usually necessary when trying to get connectivity between two virtual switches. These switches are connected, however, through their respective physical switches which are bridged together. Ping just times out, arp request looks like this: [root@vmguest1:~]# arp -a vmguest3 vmguest3.example.com (1.2.3.4) at <incomplete> on eth0 [root@vmguest1:~]# arp -a host1 host1.example.com (1.2.3.5) at 00:0C:64:97:1C:FF [ether] on eth0 VMGuest1 can reach hosts on pSwitch1, so why can't it get to hosts on vSwitch1 through pSwitch1 the same way?

  Read the article

• How do I set up a bridge on Ubuntu GNOME 14.04

  - by NJRandy

  I found a guide for setting up a bridge in Fedora and was trying this: $ nmcli connection delete p33p1 $ nmcli connection add con-name br0 type bridge ifname br0 autoconnect yes $ nmcli connection add con-name p33p1 type bridge-slave ifname p33p1 master br0 autoconnect yes I found that $ nmcli con delete uuid [uuid here] accomplished the first step. nmcli connection does not have an 'add' action in this distribution. Please help me do the 2nd and 3rd steps. Context: I am trying to set up a virtual machine. I believe this is a necessary step for the VM to access my network and the internet. Please feel free to correct me if I am wrong! BTW, I am a linux newbie, tech oldie. Thank you.

  Read the article

• Executing EXE with wildcard from psexec

  - by Danny

  I'm writing a few scripts that I am using to integrate with bamboo for some continuous integration improvements and I've run into a bit of a snag. I'm currently trying to run a psexec command that installs the latest build on the remote machine but I dont necessary know the revision number. For example, the remote exe file could be Installer-3.1.xxxxx.exe where the xxxxx changes. I tried running the command with Installer-3.1.*.exe but it takes it as literal in Windows. I'm not overly familiar with Windows command prompt and am more used to Linux at this moment.

  Read the article

• Installing Postgresql: postmaster not found

  - by user41667

  Hello, I'm trying to get a postgesql server running (most recent version). I downloaded the source, and it compiled fine. I also created a user postgresql and let that user own /usr/local/pgsql/data and such. I followed the installation procedure on the website of postgresql. However, the system now can't find the postmaster program, necessary to start the server (not on my account, but also not on the special created postgres account). Apt-get install also can't find a program called postmaster, so I assumed it was part of postgress. Clearly I did or understood something wrong, can you help me? Thanks in advance.

  Read the article

• Keeping rackspace vserver alive

  - by mit

  It appears to me that rackspace somehow freezes cloud VMs after some idle time. This means the first page request to a php page takes much longer to respond than the subsequent requests. I am actually querying a machine with wget from a different host now to keep it "alive". But I wonder what frequency would be necessary. Does anyone know the time period after which they send a VM to "sleep"? I guess it would be some minutes. EDIT: There is no caching involved on the php site. It just recently moved from another vhost and there was never such latency on the first request.

  Read the article

• Setting up JDK 7 for IntelliJ on the Mac

  - by Fergal

  I installed the JDK by downloading the dmg from the Oracle website here: http://www.oracle.com/technetwork/java/javase/downloads/jdk7u9-downloads-1859576.html After installation I tried to setup the JDK in IntelliJ but when I set the location to the JDK in the Project Structure-SDKs screen, only a few libraries were loaded and many (including all libraries from Content/Classes/) were missing. How can I add all of the necessary libraries libraries? The install location for the JDK is /Library/Java/JavaVirtualMachines/jdk1.7.0_07.jdk/Contents/Home I've tried looking in /System/Library/Frameworks/JavaVM.framework/Versions/ to no avail.

  Read the article

• Disadvantages of enabling AHCI after Win7 install

  - by Mario De Schaepmeester

  I've formatted my notebook that has a 5400RPM HDD with ~500GB capacity. After installing Windows 7 and about half the drivers (including chipset) I began to doubt whether to go for IDE or AHCI mode for my hard drive. There used to be a lot of discussion on the internet which is better and so far I understood it was particularly helpful on SSDs. Now the general consensus seems to be that AHCI mode is best for most hard drives. I have thus enabled AHCI in the middle of configuring my notebook (rest of the drivers, necessary software etc...) Two questions: considering my HDD's spec above, should I leave it on? Is there any disadvantage of enabling it after Windows 7 and chipset drivers installation? Windows 7 version is 64 bit Home Premium.

  Read the article

• 64 Bit Windows drivers for Inspiron 1720

  - by Rob Allen

  Dell doesn't seem to offer 64 bit drivers specifically for the Inspiron 1720 (laptop). I'm going to be upgrading from Vista 32-bit to Windows 7 64bit and I want to pull down the necessary stuff before hand. Are there any Dell systems that are similar enough to the Inspiron 1720 that I can use for a baseline to make sure I still have Ethernet and WiFi after the reinstall? It doesn't matter if they are for Vista 64 or Windows 7. Identified hardware: Processor: Intel mobile Core 2 Duo T7500 Chipset: Intel Mobile 965 Express Wifi: Intel Pro Wireless Drive Controller: Intel Matrix Graphics: nVidia GeForce 8600M GT Bluetooth: Dell TrueMobile 355 + EDR Ricoh card reader I think anything else, the default Windows drivers will be sufficient. Let me know if you think I missed something thing please.

  Read the article

• How do I clone an Ubuntu server under VMWare

  - by dave

  I have a Ubuntu 12.04 server running under VMWare. As best as I can tell, the VMWare vmbk file has been corrupted. The server is operating normally, but this is preventing backups (using Veeam). To remedy this, I'd like to create a duplicate VM without the corruption issue. However, with the corrupted file VMWare can't help me, eg. create a simple clone. I can create a new VM. How do I clone the configuration / data from my problematic server into the new one? Updated: just to clarify: I realise I can't use the VMWare clone tools. I will manually create a new VM (with a base O/S if necessary). How to I replicate the O/S and data from one VM into another?

  Read the article

• Longlasting Macport installation

  - by user10826

  Hi, I use Macports on Mac OSX to install some software. But there are somethings that I find very strange. For instance, yesterday I installed some app. and the it needed to get gcc43 and compile completely from source! It took a lot of time, although now everything works right. I understand that compilation of everything in the gentoo spirit is eomthing nice, but in the Mac case, not necessary. There are ony sole hardware variations, so it will be easier to get the binaries. I wonder if Macporst can be forced to get the binaries when available and therefore avoid these time consuming compilations. Thanks

  Read the article

• How do I leverage the power of my desktop from my laptop?

  - by TheDeeno

  I have a powerful desktop, and a decent laptop. My laptop is my primary machine. When I'm home, I'd like to "tap into" the power of my desktop while using my laptop. I'm not thinking a solution like "remoting in" and actually using my desktop from my laptop. I mean sending work to the desktop when my laptop is taxed in a seamless way. Is this possible at all? How would I do it? I'll do whatever is necessary to my desktop to enable this if it's feasible. My laptop has Vista installed.

  Read the article

• Can I do a "one-time" file content search in Windows Server 2008 without adding the folder to the index?

  - by G-.

  Can I search for files which contain a specific string in a folder if that folder is not in the search index? So, lets say folder 'textFiles' is not in the index. I navigate to this folder in windows explorer. I type '.ini' in the search box I want to see a result list containing only 'b.txt' FOLDER C:\textFiles\ FILE a.php CONTENT once twice thrice mice moose monkey FILE b.txt CONTENT mingle muddle middle.ini banana beer FILE c.spo CONTENT sellotape stapler phone book I do not have permission to add folders to the windows index and I do not have permission to install or run any executables that did not ship with the server or approved applications. I'd be happy with a windows native command line solution if necessary? Thanks G

  Read the article

• How to get rid of NAT in a LAN?

  - by Alberto

  Currently the LAN I manage is organized as follows: internal network (192.168.1.0) which uses a Linux server as a gateway (internal address on interface br0 192.168.1.1, external address on interface br1 10.0.0.2) through NAT; then the 10.0.0.0 network has another gateway (10.0.0.1) which through another NAT connects the whole thing to the internet. What I would like to achieve is to configure the Linux server so that the first layer of NAT is no more necessary, so that for example a computer in the 10.0.0.0 network can ping every computer in the 192.168.1.0 network. I deleted this iptables rule: iptables -t nat -A POSTROUTING -o br1 -j SNAT --to-source 10.0.0.2, but of course now computers on 192.168.1.0 cannot reach the internet; ip forwarding is of course enabled. What's missing here? Thanks

  Read the article

• does the *physical* order/location of drives in a mdadm-managed RAID-10 array matter?

  - by locuse

  i've setup a 4-drive RAID-10 array using mdadm-managed, software-raid on an x86_64 box. it'd up & running and works as expected, cat /proc/mdstat md127 : active raid10 sdc2[2] sdd2[3] sda2[0] sdb2[1] 1951397888 blocks super 1.2 512K chunks 2 far-copies [4/4] [UUUU] bitmap: 9/466 pages [36KB], 2048KB chunk atm the four SATA drives are physically plugged into the motherboard's 1st four SATA ports. i'd like to gather the necessary/complete info for catastrophic recovery. reading starting here, http://neil.brown.name/blog, and the mailing list, i'm not yet completely confident i have it right. i understand 'drive order matters'. is that logical, &/or physical order that matters? if i unplugged the four drives in this array, and plugged them each back into different ports on the motherboard or a pci card, as long as i've changed nothing in software config, will the array correctly auto-re-assemble?

  Read the article

• How could I portably split large backup files over multiple discs?

  - by sourcejedi

  Context: I make backups / archives, primarily of photos. I'm experimenting with Bup, which is designed for backup to hard disk. Basically it creates Git repos which include packfiles of up to 1GB. But I still need last-ditch backups to keep offline and move offsite (and keeping them on read-only media is good too!). What are the options for archiving and splitting large files over several discs like CDs (and reading them back!)? I'd prefer methods which will stay readable in future. are portable e.g. to Windows. have known simple implementations, so I could re-implement them myself if necessary. (Using Bup packs will stretch my robustness budget. So I want to be confident about how other parts of the system would behave). I heard split archives are possible with both ZIP and 7-Zip. Is that right?

  Read the article

• AXFR problem using gradwell secondary DNS

  - by Roaders

  Hi All I use Gradwell.com to provide secondary DNS but I keep getting e-mails along the lines of the following saying that it's not working: You have asked us to provide a secondary DNS service for the following domain(s) Unfortunately, the primary DNS server(s) you specified are not permitting the necessary zone transfers from our servers, or they are not answering "SOA" queries for your domain correctly. I have gone through the support procedure and they weren't that helpful. They have suggested the following: Our secondline team have suggested setting the AXFR to use anouther machine. This will ensure that the transfer is not locked down to one machine and should allow any machine to make the request I don't really know what AFXR is and I only have 1 production machine so I can't set the AFXR to use another one! In previous support correspondence we confirmed that I am allowing transfers to the correct IP and that I have the correct ports open on the firewall. I am running Windows Server 2003. What can I do to try and get these zone transfers working? Thanks

  Read the article

• How can I boot directly to a VirtualBox (.vdi) image (possibly via hypervisor)?

  - by Josh

  I have a system image in VirtualBox as a .vdi file. I am aware of how to convert this to other formats of VM using VBoxManage. I'd like to boot this image locally on a number of clients which currently have no OS installed. What's the simplest way to boot into this VM from bare metal? I'm willing to install some minimal OS if necessary. Is this even possible? Maybe there's something out there along the lines of VDI Blaster that will load a locally stored VM?

  Read the article

• Grapher: Edit Equations Without GUI

  - by Nathan G.

  I'm trying to edit the equation of a Grapher file without opening the Grapher UI. I've gotten as far as knowing that I need a hex editor to do this. I can't, however, find my equation in that file to change it. Does anyone know how Grapher stores this information, and how to change it? My ultimate goal is to be able to change the file through the shell so I can open it and have Grapher show me my new equation (that was set with the CL). Thanks! I will set a bounty if necessary.

  Read the article

• Using off-the-shelf hardware for brand-name servers; Possible? Good idea?

  - by threecheeseopera

  Is it possible or advisable to use 'regular' not-sanctioned-by-the-server-manufacturer hardware in high end servers? Often these manufacturer-supplied parts have a very high price markup, and I wonder if it's always necessary (understanding that they probably apply more rigorous requirements to this hardware). For example, Dell sells 300GB 15,000rpm serial-attached scsi drives for a certain server family for almost $600 each, while newegg sells a drive with the same specs for almost half the price http://www.newegg.com/Product/Product.aspx?Item=N82E16822116059. Do we really need to pay these high markups, especially for disks that are likely RAID-ed and so guarded against catastrophic failure?

  Read the article

• Plesk directory structure problems

  - by johnnietheblack

  I have an entire website with the following directory structure: /example.com /html (public) /css /js index.php /lib session.php other_lib_files.php /views index.php /models /controllers As illustrated, the html is public, and anything above it is private. My site now needs to upgrade servers, and the new server (Linux w/ Plesk) has the following structure (reduced to the problematic parts below): /myplesksite.com /httpdocs /css /js index.php /private /lib /models /views What I would THINK is that I should be able to put my /lib, /views, /models, etc in the directory directly above /httpdocs, the same way I had it in my previous server. Is that possible? Or do I have to put it in private? I would really love not to have to adjust my internal paths throughout the site if not necessary...

  Read the article

• .NET framework 4 backwards compatibility.

  - by Dark.Lama

  Hi! I had installed .NET framework 4 in my system. It says that .NET framework 4 is backwards compatible with all previous versions. But an app installer still asks me to install .NET.F.W. 3.5 SP1. What should I do to make the installer aware of .NET 4's presence? Is it necessary to install .NET. 3.5 SP1 too? (It is a big setup ~250 MB)

  Read the article

• Automatic document generation

  - by Bowler

  I have some data in an excel file from which I have to generate a report. I repeat this task fairly regularly and am looking to automate it. I have a LaTeX project into which I usually just copy data by hand, export the necessary worksheets as pdfs and add them to my LaTeX project and compile with pdflatex. It has occured to me that there must be a way to automate this process. Is there an efficient way to export the data from excel and into a LaTeX project, possibly a vba script in excel could run the process? Also, it doesn't have to be LaTeX, I'm not all that experienced with MS office's more advanced features is there some way akin to a mail merge that I could achieve this with? In some ways this might be better in case I have to pass the work on to someone who doesn't know LaTeX. Thanks.

  Read the article

• sudoers security

  - by jetboy

  I've setup a script to do Subversion updates across two servers - the localhost and a remote server - called by a post-commit hook run by the www-data user. /srv/svn/mysite/hooks/post-commit contains: sudo -u cli /usr/local/bin/svn_deploy /usr/local/bin/svn_deploy is owned by the cli user, and contains: #!/bin/sh svn update /srv/www/mysite ssh cli@remotehost 'svn update /srv/www/mysite' To get this to work I've had to add the following to the sudoers file: www-data ALL = (cli) NOPASSWD: /usr/local/bin/svn_deploy cli ALL = NOEXEC:NOPASSWD: /usr/local/bin/svn_deploy Entries for both www-data and cli were necessary to avoid the error: post commit hook failed: no tty present and no askpass program specified I'm wary of giving any kind of elevated rights to www-data. Is there anything else I should be doing to reduce or eliminate any security risk?

  Read the article

• Excel VBA Function runtime error 1004: Application-defined or object-defined error

  - by music2myear

  I'm trying to learn functions for the purpose of simplifying and reusing code whenever necessary. I began by turning something I use pretty often into a function: Returning the integer value of the last non-blank row in a spreadsheet. Function FindLastDataLine(strColName As String) As Long FindLastDataLine = Range(strColName).Offset(Rows.Count - 1, 0).End(xlUp).Row End Function Sub PracticeMacro() intItemCount = FindLastDataLine("A:A") MsgBox ("There are " & intItemCount & " rows of data in column A.") End Sub When I run this I recieve the runtime error '1004' "Application-defined or object-defined error" which Help helpfully defines as "someone else's fault" to quote not quite verbatim. Where might I be going wrong?

  Read the article

• rsync remote to local automatic backup

  - by Mark Molina

  Because all my work is stored on a remote server I would like to auto backup my server monthly and weekly. My server is running Centos 5.5 and while searching the web I'm found a tool named rsync. I got my first update manually by using this command in terminal: sudo rsync -chavzP --stats USERNAME@IPADDRES: PATH_TO_BACKUP LOCAL_PATH_TO_BACKUP I then prompt my password for that user and bob's my uncle. This backups the necessary files from my remote server to my local device but does somebody know how I can automate this? Like automatic running this script every sunday? EDIT I forgot to mention that I let direct admin backup the files I need and then copy those files from the remote server to a local server.

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >