Search Results

Search found 54052 results on 2163 pages for 'run configuration'.

Page 73/2163 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• Superscope DHCP leases and configuration set up

  - by Vdub

  Hello I wanted to see if someone could help with a network problem I am having. Right now we have a super-scope and scopes of 192.168.50.1 and 192.168.51.1, as of now both are activated but only 192.168.50.1 is handing our leases, 192.168.51 wont. here is a summary of our network Gateway: watchguard firebox x750e for our router/gateway at 192.168.50.1 I set up as a secondary IP address 192.168.51.1 Server: Server 2008 r2 standard, running our DNS @ 192.168.50.242 and 8.8.8.8 as a secondary, AD, and DHCP. On that NIC card i have 192.168.50.242 as the IP address and 192.168.51.242 as a secondary. 192.168.50.1 as the default gateway and 192.168.51.1 as a secondary. Im am not very knowledgeable at this but as far as i have researched after adding a super scope and activating scopes, they should automatically start handing out addresses and I cant figure out why only one does. any help at all would be appreciated.

  Read the article

• Making python run on my webserver

  - by richzilla

  Hi all, im getting a bit stuck regarding options for running python scripts on my server. From the research ive done so far, i can see i need to modify apache slightly to run python scripts, by using either mod_wsgi or mod_python. Two issues i have: mod_python doesnt appear to be maintained anymore (last release, 2007) mod_wsgi appears to require modification of my httpd.conf file on a per application basis. What im wanting to know, is there a way of getting python scripts to run in the same way as php, i.e. just by going to index.py etc... or is it more involved than that? At present im just trying to set it up on my xampp install. Any help would be appreciated.

  Read the article

• Configuration of Server root email - Change Address and Name on outgoing email

  - by JTWOOD

  As a newbie Postfix user, I've gotten so far and now I am stuck with a SMALL problem. I would like to configure my local network servers to send alerts and like using the following: 1) From address: [email protected] 2) From name: Hostname I can get #1 to work fine using smtp_generic_maps The problem is that on my email client, the name is listed as "root" - as in the header shows the following: Date: Sun, 29 Jul 2012 13:21:01 -0400 (EDT) From: [email protected] (root) To: undisclosed-recipients:; I'd like to change it to "From: [email protected] (Zeus)" I imagine that this can be done in the headers_check, but so far I haven't gotten anything to work and before I waste a ton of time trying to get this to work, I'd like to make sure I am on the right track. My aliasing and genericmaps are set up correctly (As far as I can see and know - the results are correct!). I just want to change that last bit in the From field to reflect the hostname. I would also like to add something in the subject of the outgoing messages for easy filtering - something like Subject: [Zeus.domain] - "Original Subject" Any suggestions are much appreciated. Thanks!

  Read the article

• Apache Configuration Issue - website without www going to default site

  - by Brian

  I have included a copy of my virtual host file for apache below. (However I have hidden the ip address and domain name for now) My problem is that the following work: www.mydomainnamehere.org www.mydomainnamehere.com mydomainnamehere.com This one doesn't work: mydomainnamehere.org - instead of going to the document root listed below, it goes to the document root of the default site. What could be causing this? <VirtualHost [ipaddresshidden]:80> ServerAdmin [email protected] ServerName mydomainnamehere.org ServerAlias www.mydomainnamehere.org ServerAlias mydomainnamehere.com ServerAlias www.mydomainnamehere.com DocumentRoot /home/www/mydomainnamehere.org/html/ ErrorLog /home/www/mydomainnamehere.org/logs/error.log CustomLog /home/www/mydomainnamehere.org/logs/access.log combined </VirtualHost>

  Read the article

• IBM BladeCenter S: Disk Configuration

  - by gravyface

  Have just the one storage bay right now (SAS 15K 600GB x 6) and have configured one storage pool in RAID 10 with 4 disks (and two global spares). For each blade, I've created a volume and mapped accordingly: Blade #1 400 GB Blade #2 200 GB Blade #3 100 GB Blade #4 100 GB When I boot up Blade 1 and enter into the UEFI Setup (F1) followed by the Adapters and UEFI Drivers LSI Logic Fusion MPT SAS Driver Utility, I see 4 disks: two are the on-board 73GB drives, the other two are 200GB each and assume I'm being presented with two logical disks from the volume I created and mapped to this blade. I was a bit surprised by this: I figured I would've been presented with one logical drive per volume, not two. I'm assuming I can just configure whatever RAID level I wish that supports two disks, but not really sure what the benefits/trade-offs here. Should I go with RAID 10 on top of RAID 10? RAID 0? Software RAID 0/1/10? Does it even matter? If this is "normal" to see two disks, then I'm going to likely just do some benchmarking and see if it makes a difference changing the RAID levels (my guess is no); if this is not normal, well, please let me know. :)

  Read the article

• Dead drive in LVM/XFS configuration

  - by Freddie Witherden

  I had three drives in LVM: a 2 TB drive and two 1 TB drives (added later). One of the 1 TB drives -- I believe the third one -- has died. Spanning all three drives was an XFS partition. Reading: http://www.novell.com/coolsolutions/appnote/19386.html I see that one way of handling this is to replace the dead drive and copy the metadata over. However, I am currently not in possession of a 1 TB drive and can not readily acquire one. Given this, what are my options? There was nothing important on the drives (if there was I would have them in RAID 1) but I would not mind attempting a recovery. Is there a simple way of forcing LVM to go with just two drives and NUL out anything else? (So that fsck can do its thing.)

  Read the article

• Sharepoint 2010 web front end servers and services configuration

  - by Yash

  I have a sharepoint insfrastructure where a document library is made available both locally and on the internet. I have a few web front end servers facing the public (in the DMZ) while having another set inside the secured network for internal use. I also have an application server for sharepoint services inside the secured network. My goal is to configure sharepoint in such a way that the sharepoint services are available only locally and not via the internet. The users accessing the system online should not benefit of the sharepoint services. Is this possible on the same farm?

  Read the article

• Ubuntu IP Configuration - multiple subnets & interfaces

  - by HaydnWVN

  Have a 'new' mailserver running postfix on Ubuntu. We are having some problems configuring the subnets & interfaces. Basically 2 subnets (.253. & .254.) need to be connected through the 3rd subnet (.252.) where the Router is residing. # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.62.254.199 netmask 255.255.0.0 network 10.62.254.0 broadcast 10.62.255.255 #gateway 10.62.252.138 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 10.62.252.138 dns-search ***.com auto eth1 iface eth1 inet static address 10.62.253.199 netmask 255.255.0.0 network 10.62.253.0 broadcast 10.62.255.255 #gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-nameservers 10.62.252.138 dns-search ***.com auto eth2 iface eth2 inet static address 10.62.252.199 netmask 255.255.0.0 network 10.62.252.0 broadcast 10.62.255.255 gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-search ***.com I have an external support company who are looking into this (they built and configured this server), but it's taking far too long... So I'm looking to highlight the mistake!

  Read the article

• What configuration changes needed on tcServer to work with Apache Web server

  - by aos37

  Hi, I have Apache Webserver 2.2.17 and tcServer-6.0.20 and I want to dispatch requests from apache to tcserver. I am using mod_jk.so and I have the following in httpd.conf LoadModule jk_module modules/mod_jk.so <IfModule jk_module> JkWorkersFile /x/y/apache2/conf/workers.properties JkLogFile /x/y/apache2/logs/mod_jk.log JkLogLevel info JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " JkMount /xyz/* ww </IfModule> My workers.properties file under /x/y/apache2/conf/workers.properties has worker.list= ww worker.ww.type=ajp13 worker.ww.port=12000 worker.ww.host=www.abc.com I'm new to tcServer (and tomcat) and I don't know what changes I have to make in server.xml on tcServer to get this to work with Apache. Any help would be appreciated.

  Read the article

• How do I schedule a task to run every hour indefinitely on Server 2003

  - by JMK

  I am moving a scheduled task from a Windows 7 machine to a Windows Server 2003 machine. On Windows 7 I can configure my task to run every hour indefinitely by setting up a custom trigger like so: On Windows Server 2003, I assume I need to use the advanced schedule options, and I have got this far: Whether I choose duration or time, my task seems to have an expiry date, how do I get this to run indefinitely? The only thing I can think of at the minute is to setup 24 schedules for my task, one for each hour but there has to be a more elegant way. Thanks

  Read the article

• Error handling pppd configuration?

  - by Sebastian

  I have a computer, running ubuntu, that I want to be connected to the network at all times. It has a GSM modem connected to it via USB. Is there some program available that monitors that the networking is working (by pinging some site(s)), and if not tries to fix the error by reseting the modem, reloading the USB drivers and perhaps by dropping the USB port's current (if possible) to force the modem to reset ?

  Read the article

• HD Radeon 6950 cannot run multiple monitors

  - by Bryan S.

  I'm having troubles getting multiple monitors to run on my graphics card. I plug one via the hdmi, and one into the DVI (I have tried both available DVI ports). with one DVI port it does not even register the monitor, with the second one I go into the Catalyst Control Center and it gives me the option to swap between the HDMI and the DVI port. I guess since this is the flex edition I could just go get 2 DSP to HDMI converters, plug 2 monitors in through the available DSP, and than the 3rd one into the HDMI, but do you have any idea why it will not let me run one HDMI and one DVI?

  Read the article

• Reporting Services 2008 configuration for basic authentication using username and password

  - by Paul

  I want to configure Reporting Services 2008 to use a custom defined username and password for access. I read that I must set reporting services to do basic authentication : <AuthenticationTypes> <RSWindowsBasic/> </AuthenticationTypes> But I didn't find specified a location where I might create usernames and passwords.

  Read the article

• Cisco NAT + IPSec + Web Server Configuration Question

  - by zagman76

  Hello - I currently have a Cisco 881W, and it is configured with one of our static IPs to do basic NAT for the network. We also have a web server that needs it's own IP. I configured the NAT for the 2nd IP, however now traffic through our IPSec VPN doesn't route to the web server properly (well, it routes to the internet, rather than through the Tunnel). I followed the instructions here: http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094634.shtml But now the outbound NAT doesn't seem to be working properly - it keeps going to the NAT of the Cisco, and not the designated IP address. If anyone can assist, I would appreciate it greatly. Let me know what you need, and I'll get it to you! Thanks!

  Read the article

• Cisco configuration for public library internet

  - by AlternateZ

  I'm a C/C++ computer programmer turned IT support guy working for a public library. My day is usually spent helping random grandparents learn how to use email, so my networking knowledge is limited to what I can glean from google. Here's the situation. We have a public library with 20 PCs on a LAN and also public wifi access. Previously we were running all of this on 1 ADSL connection and people complained about low speeds. We hired a networking company to set up a Cisco dual-WAN router for us, and purchased an additional ADSL connection. The intention was to give the LAN PCs a guaranteed amount of bandwidth each, and then let the wifi users split the rest. The results were far worse than what we expected, and all we got from the company was excuses and they've since washed their hands of us. During busy periods, net performance on the LAN PCs are so poor that attaching files to gmail etc often times out and fails - far from the "guaranteed amount of bandwidth each" that we hope for! Sometimes it feels like performance is worse than before when we had 1 ADSL link and an unconfigured router? Anyways, surely this is a problem encountered a million times over across the world? (Sharing internet across many users effectively.) What are standard solutions for something like this? I admit to not even knowing the right jargon to google for (load balancing?) I'd appreciate any links to resources/guides that might help me get a better understanding of the problem/solutions, and perhaps some stories of your own experience in solving similar problems. This will help us evaluate and negotiate with network consultants in the future. If its relevant, our router config contains a section "policy-map" with "bandwidth percent" for each class of user (LAN, wifi), and "fair queue".

  Read the article

• Best Configuration For Youtube HD 720p

  - by Eray Alakese

  Hello, I'm recording a screencast with CamStudio . My computer's screen resolution is 1280*800 , so video's resolution is 1280*800, too. I'm using Microsoft Video 1 codec when recording. I was record 9 minutes video and this video's size is 214 MB . I will upload this video to Youtube. I'm coding a web site at the video, because of this, video must be quality (720p) . I want to reduce file's size, before upload . I'm using Total Video Converter . But when i convert to FLV , video's size increase to 250MB :) I don't know, how can i configure this setting and which file type should i choose.

  Read the article

• Best Configuration For Youtube HD 720p

  - by Eray Alakese

  Hello, I'm recording a screencast with CamStudio (http://camstudio.org/) . My computer's screen resolution is 1280*800 , so video's resolution is 1280*800, too. I'm using Microsoft Video 1 codec when recording. I was record 9 minutes video and this video's size is 214 MB . I will upload this video to Youtube. I'm coding a web site at the video, because of this, video must be quality (720p) . I want to reduce file's size, before upload . I'm using Total Video Converter (http://www.effectmatrix.com/total-video-converter/) . But when i convert to FLV , video's size increase to 250MB :) I don't know, how can i configure this setting and which file type should i choose. (screenshot here : http://i.imgur.com/Se0EP.jpg )

  Read the article

• Run a .bat file in a scheduled task without a window

  - by Tom Dunham

  I have a scheduled task that starts a batch script that runs robocopy every hour. Every time it runs a window pops up on the desktop with robocopy's output, which I don't really want to see. I managed to make the window appear minimized by making the scheduled job run cmd /c start /min mybat.bat but that gives me a new command window every hour. I was surprised by this, given cmd /c "Carries out the command specified by string and then terminates" - I must have misunderstood the docs. Is there a way to run a batch script without it popping up a cmd window?

  Read the article

• recommendation for configuration for a multi-core guestOS

  - by reidLinden

  Hi there, I've just received an upgraded Host machine, and am looking to push some of those advances to my workstations Guest OS(s). In particular, I used to have a single processor, with 2 cores, so my guestOS only had 1/1. Now, I've got a single processor with 8 cores, so I'm curious about what would be recommended for my GuestOS now? 1 processor/4 cores? 2 processors/2Cores? 4 processors/1 core? My instinct says to stick with the number of physical processors (or less), but, is that based on reality? I spent a good while looking for an answer to this, but perhaps my google-karma isn't in my favor today. Suggestions?

  Read the article

• Need help on phpMyAdmin Configuration

  - by Tareq

  I use Windows XP on my Server and Client Machines On the Server, I install Wamp5 1.7.3 This software installs phpMyAdmin 2.11.0 I want to use this phpMyAdmin from my Client Machines. What should I do? If you need any more information please inform me. I need this solution very urgently. Thanks in advance.

  Read the article

• Airpot Express configuration

  - by Christina

  We are trying to set up remote access to a computer that houses a server fro a particular program we are running. The program says we need to configure the office router. In the firewall settings it says to open ports 5345-5351 (TCP only). Port Forwarding: You will also need to forward the same range of ports (5345-5351) to the computer running the Server. This typically requires that the computer running the Server be assigned a static IP on the local network. Having trouble figuring out which IP address we actually need to be using on the client side of this program in order to access the server computer. Can someone walk through this process?? We are working on Mac OSX 10.5. Thank you in advance!

  Read the article

• slave dns server, resolv.conf configuration

  - by Tim the Enchanter

  I have two servers (a master and slave) running DNS (bind). What should the /etc/resolv.conf file look like for the master and the slave? For example should the servers running the DNS have only : nameserver 127.0.0.1 or should they refer to the I.P. addresses of each server, as the other servers on the network do : search <mydomain>.co.uk nameserver 192.168.1.52 nameserver 192.168.1.57

  Read the article

• postfix test and configuration problem

  - by Woho87

  Hi Guys! I installed postfix using sudo yum install postfix postfix-mysql. I'm newbie to mail systems, but I have one AMAZON EC2 instance with a public DNS. I used the public DNS in most cases, when I configured the file main.cf. The public DNS I have is from amazon and it is a long string(ec2-123-34-234-677.....amazon.com). // I configured this on main.cf. I replaced example.com with ec2-123-.......amazon.com myhostname = mail.example.com mydomain = example.com myorigin = $mydomain mydestination = example.com, $transport_maps local_recipient_maps = $alias_maps $virtual_mailbox_maps unix:passwd.byname home_mailbox = Maildir/ How do I test postfix? I just want it to send emails for my web application. I tried to test it with >telnet localhost 25 after I typed in SSH >sudo postfix start. but I recieve the message that telnet command can not be found. I also use the Amazon linux distribution if you want to know. I use it because it is free. What have I done wrong? Are there anymore configurations required pls help!

  Read the article

• How do I run vino-server without a monitor attached in Ubuntu 10.04

  - by Ole

  I just upgraded to Ubuntu 10.04 yesterday on a headless home server. I use the server for a variety of purposes, and what I don't know how to do via SSH I've alway been able to do through VNC. However, since the upgrade vino-server will no longer run if there isn't a monitor attached. Before it used to start up without a problem. Even by attempting to run the server via SSH gives me a "could not load display" error. Summary: I need to get vino-server running at boot time on a server with Ubuntu 10.04, without a monitor attached.

  Read the article

• ftp users configuration in OpenSuse 12

  - by chieroz

  I usually work with MacOSX servers but this time I need to set up a ftp service on a OpenSuse 12.2 server and I am a little lost. I am using the remote YAST2 tool via ssh. I created several users who can connect via ssh and/or ftp, so the basic setup is ok. But when connecting via ftp all my users don't have write permissions. The FTP directory for authenticated users is /srv/www/htdocs, which has permissions root:root. The OpenSuse manual say it's bad practice to change these permissions, but my normal users (even the ones in the sudoers list) cannot upload files. So I am stuck: as a workaround I use rsync, but from time to time I just need to establish a working ftp connection. What's the right approach for users permissions in this scenario? Thanks a lot.

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >