Search Results

Search found 2697 results on 108 pages for 'tan kah ping'.

Page 73/108 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• Jumbo Frames on DIR-655

  - by Spookyone

  I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• Running a webserver behind a firewall, is it secure?

  - by i.am.intern

  Currently we have a Linux-based firewall which NAT-ing our public IP address to give internet access to our staff's PCs and a Windows Server 2003 for internal filesharing. I want to host Redmine/SVN (a bugtracker) internally behind this firewall using a Linux server. This webserver will be accessed by our clients externally so they can post bug reports. This means that I have to open port 80 & 22 at the firewall to give access to the webserver and me to SSH it from home. However, let's say I'm using password-based SSH for the webserver and somebody cracked it. Does that mean the cracker could ping and access other servers and PCs in the network?

  Read the article

• Apache freezing, How to detect which virtual host is getting hit?

  - by mr-euro

  I have a production server that in the last 24 hours has been hard rebooted 4 times due to freezes. Ping is fine but all other services time-out (Apache, SSHd, etc). I have now diagnosed it to Apache running out of memory due to an exorbitant amount of child processes forking suddenly within seconds of starting Apache. Stopping Apache just after rebooting keeps the server stable again. My two questions are: Is there a way to detect which of the vhosts is being suddenly hammered without looking into each vhost's access log one by one? Is there a way to quickly enable/disable vhosts without commenting (#) them all out in httpd.conf?

  Read the article

• Problem with PPTP VPN and internet

  - by Enriquev

  Hello, I have an internet connection the following way : Internet Modem <- FireWall(not a router, a firewall) <- PC Everything is setup so my pc has an external ip address, and my firewall takes care of blocking bad stuff. I connect by VPN to an external network, so I added a new connection using Windows Xp's "New connection wizard" (the vpn client that comes with Windows XP), it's a PPTP connection so I used all default settings. I put the PPTP server's IP, my username and password and I succesfully connected. I was able to have access to the external VPN ressources. The only problem is everytime I connect to this VPN, my computer cannot connect to the web anymore, no msn, no ping, no web. Is there anything special I should be doing?

  Read the article

• Internet wireless connected with limited access, windows vista

  - by Wawa wiya

  Hello I had some malware in my computer so I did a bit of manual work to remove it including resetting TCP/IP. Now the malware is gone. I can see my home wireless network and I can get connected to it but when connected I get the Internet wireless connected with limited access message. When I go to the IE I cannot browse. When I tried to ping 192.168.1.1 I got an Error Code 1231 Unconnected Network Problem. I have deactivated my Windows firewall as I thought it could be hyperactive security. Still no luck. I have Norton but it is not active, I have also Avast and AVG installed but they are not active. Any ideas?

  Read the article

• routing problems

  - by user174050

  I have an windows 7 laptop and I have installed openvpn 2.2x as client. The laptop has 2 ethernet cards, one of them is wireless. The wireless lan is 192.168.1.0/24 The Fix lan is 192.168.2.0/24 If I connect to the openvpn server useing the Fix lan the I can connect properly and for testing I ping to my openvpn server 10.0.0.1 that answers correctly. But if I connect to the openvpn server useing the wireless lan, I can establish the connection but pinging to the server isn´t possible. The packets goes allways lost. Why can this happen? In an other laptop where windows xp is installed and with the same lan configuratio everything works propperly. In both cases the firewall is configured to access the vnc server and the server directories useing samba. With the XP I have no problems. I will thank you for all help Ignacio

  Read the article

• Accurate way to check latency between Server ?

  - by Rick

  Hi, First of all, I hope my post are is posted in the right section . Below are something i got confused hope you one can help. My business partner 's IP server are in: Sanjose, CA , and I am looking for a datacenter which give the least latency to that IP. I found 2 . 1st datcenter is in San Francisco, CA . 2nd data center is in Newyork. Then I do the ping from each datacenter to the my partner's IP. 1st datcenter's result: 75ms 2nd datacenter's result: 2ms I 've done multiple time, 2nd datacenter always give better result. Now my question is: Isn't the 1st datacenter suppose to give better result, since their location are closer ? How come the result produce different, what is the accurate way to check latency ? Thanks

  Read the article

• How do I get the machine name from an IP via Multicast DNS?

  - by Adam

  I have a list of IP addresses on a network, and most of them support multicast DNS. I'd like to be able to resolve the server name instead of just having the IP address. ping computer.local 64 bytes from 192.168.0.52: icmp_seq=1 ttl=64 time=5.510 ms 64 bytes from 192.168.0.52: icmp_seq=2 ttl=64 time=5.396 ms 64 bytes from 192.168.0.52: icmp_seq=3 ttl=64 time=5.273 ms Works, but I'd like to be able to determine that name from the IP. Also the devices don't necessarily broadcast any services, but definitely do support mDNS broadcast. So looking through services won't work.

  Read the article

• How to show what proxies/firewalls are enabled on Windows XP?

  - by Stephen Melrose

  Hi, I'm trying to fix a Windows XP PC that is having a strange problem. The computer can't seem to connect to the internet, even though an internet connection is present. The router and internet is working fine as I've connected a laptop to it via LAN and wireless and both worked fine. The PC in question is connected to the router as it has an IP from the DHCP. The problem is I can't connect to nor ping any internet address from the PC. I can't even connect to the router admin itself. I've tried both LAN ports in the PC, same problem and both. I'm assuming there's a proxy or firewall on the PC stopping the connections, I just don't know how to find them or see which one is causing the issue. So my question is how do I on Windows XP display the system proxy settings and/or any firewalls that are running? Cheers.

  Read the article

• rsync server side limit bandwidth/connection

  - by c2h2

  In a VOIP application, I have upto 3000 clients rsync audio files from there linux server in a daily, server is placed at a data center (10Mbps in/out bound), the server works as a VOIP sip server running FreeSWITCH (low ping latency should be ensured.) Therefore I would like to have server side control of rsync which controls: Limit total outbound bandwidth. Limit total number of connections. (Reject clients while at max number of connection and let it retry after a specific time frame.) OPTIONAL: list/kill individual connections. Normally I would use ssh + rsync + pem_keys with some extra options, but above requirements are not feasible by simple command lines. Can anyone point me some direction. or show some scripts/tools? I would also probably integrate them and release on github. Thanks!

  Read the article

• Can't get nmap to work under Windows 7 64 bit

  - by jitbit

  I'm trying to install and run the nmap tool to test my server, but it keeps saying Note: Host seems down. If it is really up, but blocking our ping probes, try -P0 and showing all the server ports are closed. Which is not true - the server is up and has lots of open ports. Any ideas? UPDATE: Just to clarify - the server can be pinged and port-scanned fine by other programs. It's juts nmap that does not work. Even "google.com" seems to be down for nmap.

  Read the article

• iptables: How to create a rule for a single website that does not apply to other websites?

  - by Kris

  Virtual Dedicated Server hosts 10 websites. 1 firewall made with iptables If one of those 10 websites gets hit by too many ping requests coming from one IP address, how do I limit or drop it without dropping it for the other 9 websites? Do I create a firewall for every website ? If so, how? Or is it better to change my rules? If so, how? Thank you. Original question was posted here iptables: what's best practice when there're several websites but you want to use a rule for a single website? but it was too vague. Let me know if more info is needed.

  Read the article

• VirtualBox cloned Ubuntu Server network error

  - by Luke

  I run a number of virtual servers on my network and I want to be able to easily clone base installations of Ubuntu Server. I use the VBoxManage command to clone the actual hard disk and I then create a new profile for my VM and copy over the settings of the original VM. However, when I boot into the cloned VM, there seems to be a network problem. When I issue a PING I get the message "Network unreachable". I traced it down to the fact that the virtual network card of the cloned VM has a different MAC address then the original VM. When I copy the MAC address the clone seems to work fine. How can I have the cloned VM have it's own MAC address?

  Read the article

• Easiest way to move my Windows installation to an SSD?

  - by Jon Artus

  I've taken the plunge and bought an SSD and want to move my existing Windows installation over. The current hard disk is 500Gb, but I've trimmed the contents down to about ~40Gb. I'm transferring it across to a 100Gb SSD and looking for the easiest way just to copy everything across and set the SSD up as a boot device. I've looked at a few tools like Macrium Reflect, but they don't seem able to restore to a smaller drive. Do I need to go for something like PING to do this? I'm trying to avoid scary Linux-based boot utilities if possible, does anyone know of an easier way?

  Read the article

• 32 bit programs can't access Internet in Windows 7 64 bit

  - by korona

  I recently got a new ASUS laptop with Windows 7 Home Premium pre-installed. It worked OK for a while but a couple of days ago, suddenly I couldn't access the Internet any more. After narrowing down the problem, I've reached the conclusion that what's happened is that 32 bit programs are suddenly not able to use the Internet, but 64 bit applications work just fine. Examples of programs that DON'T work any more: Google chrome Firefox Internet Explorer 8 World of Warcraft Examples of programs that DO work: Internet Explorer 8 (64 bit) ping (command line) nslookup (command line) ftp (command line) I'm pretty sure that those command line apps are 64 bit native. A re-install of Windows using the recovery partition on the laptop did fix the problem temporarily, but now it's back again. And I seem to be stuck between a rock and a hard place getting someone to take the responsibility for this; the vendor says to talk to ASUS, ASUS says it's a software issue, and Microsoft doesn't give support on OEM licenses... Does anyone know how to solve this issue?

  Read the article

• Routing traffic to a specific NIC in Windows

  - by Stoicpoet

  I added a 10GB NIC to a SQL server which is connected over to a backend storage using ISCSI. I would like to force traffic going to a certain IP address/host to use the 10gb NIC, while all other traffic should continue to use the 1GB NIC. The 10gb nic is configured using a private network. So far I have added a entry in the host file to the host I want to go over the private network and when I ping the host, it does return the private IP, but I'm still finding traffic going to the 1gb pipe. How can I force all traffic to this host to use the 10gb interface? Would the best approach be a static route? 160.205.2.3 is the IP to the 1gb host, I actually want to the traffic to route over an interface assigned 172.31.3.2, which is also defined as Interface 22. That said, would this work? route add 160.205.2.3 mask 255.255.255.255 172.31.3.2 if 22

  Read the article

• What can I do to configure my SSH such that it pauses for a flaky connection?

  - by kfmfe04

  I run ssh from OSX to a Ubuntu box - under home WIFI, everything works perfectly. However, when I ssh from certain external networks, ssh may be working fine for a minute or two and then drop due to a flaky network (diagnosed by pinging 8.8.8.8). How can I set up ssh so that it simply waits/pauses rather than drop (when dropping, I have to setup my development environment from scratch - a big hassle). EDIT When I say a bad connection, I mean, for example, ping 8.8.8.8 will work fine for a while, and then fail for 40-50 pings, and then come back on again.

  Read the article

• Installed IE8 & SP3 on XP now I can't HTTPS from any browser.

  - by Kevin

  The computer is Windows XP Professional SP3 with IE8. On the Tools Options Connections the "Settings" is GRAYED OUT (I am an admin on the machine) Any browsing of https:// addresses results in IE displaying the following: "this program cannot display the web page" After installing an alternate browser and trying the same https:// address I get a similar error message. I have tried using Compatibility View Settings to for all web pages and this has no effect on the problem. HTTP addresses work fine, I can PING sites such as google.com without issue. Question: What could be preventing me from getting at the settings to check to see if I'm using a proxy? What else could be preventing HTTPS access?

  Read the article

• Name of my sql server instance from outside the network

  - by Michel

  Hi, normally i connect to my sql server instance from my local computer, and then the server name to connect to is the name of my laptop. So i can connect to server instance 'MichelLaptop' But now i'm trying to connect to my server from outside my network, and the first thing i wonder is: what is the name of the instance? i've made a redirect to my local machine in the DNS of my domain, so i said (this is not the real data) testsql.mydomain.com goes to 190.191.192.193 and when i ping testsql.mydomain.com, i get a response from 190.191.192.193 But what then is the server name?

  Read the article

• dig gets the right result from DNS server, but name still fails to resolve

  - by EMiller

  Under what conditions would the following occur? From a given OSX machine on an internal network: $~ cat /etc/resolv.conf nameserver 10.102.120.7 nameserver 10.102.120.2 From the same machine: $~ dig @10.102.120.7 in.local <snip> ... ;; QUESTION SECTION: ;in.local. IN A ;; ANSWER SECTION: in.local. 43200 IN A 10.102.123.30 <snip> ... And yet, this workstation cannot ping in.local, nor load pages hosted by apache on that machine. 10.102.123.30 is definitley up (2 OSX machines I know fail to resolve in.local - but other machines on the network can). I have also checked their /etc/hosts to see if anything there might interfere... Not sure what else to check...

  Read the article

• Windows Server 2008 is stuck at "configuring updates - stage 3 of 3 - 0% complete"

  - by Chris

  This has happened the last two times I've done updates to this system, and I really have no idea what is going on. It is installing a only a month's worth of updates. It only responds to ping and no services are up, so I can't view the system remotely (I have to hook up a monitor to see this message). In the past I've just restarted the system at this point and it eventually finishes updating. I want to know what I can do to avoid this situation, how to diagnose what is going on, and how to get any kind of remote access during the updates. Edit: I can start the machine in safe mode (where I did nothing but backup some files). I restarted and it no longer tries to do a windows update, just goes to the desktop where everything seems extremely broken. I can click on some things, but not launch most programs. I guess all I can do at this point is do a system restore or something.

  Read the article

• Is Samba "remote browse sync" possible across OpenVPN tunnel?

  - by John Reynolds

  I'm connecting 2 TomatoUSB (Shibby build on WNR3500L v2) routers with an OpenVPN routed connection: ----------------------- ----------------------- | Router 1, subnet 20 | <--tunnel--> | Router 2, subnet 21 | ----------------------- ----------------------- Router 1 is the OpenVPN server and Router 2 is a client. Clients attached to the routers on both subnets can ping clients on the other subnet, so the tunnel and routing works. I've enabled file sharing on both, in order to get their Samba WINS servers running. Is it possible to get name resolution across the tunnel? I've tried remote browse sync = 192.168.21.1 in /etc/smb.conf on the server side, to no avail. Also tried using the IP adress that the client gets from the OpenVPN address pool (usually 10.8.0.something), but still no joy.

  Read the article

• RSync over SSH hangs and fails with timeout

  - by tx2

  Client: Gentoo, GCC 4.3.4, RSync 3.0.9 Server: Ubuntu 10.04.4 LTS, RSync 3.0.7 Client and server connectet through is Internet, about 2Mbps. Ping is ok. RSync called on any files in any direction hangs on random file, then, after timeout, fails with: [sender] io timeout after 30 seconds -- exiting rsync error: timeout in data send/receive (code 30) at io.c(140) [sender=3.0.9] [sender] _exit_cleanup(code=30, file=io.c, line=140): about to call exit(30) In 1/10 trys is pass correctly. I've tryed to add SSH options TcpRcvBufPoll=yes, KeepAlive=yes; disable and enable rsync compression -- no changes. How can i make rsync works properly?

  Read the article

• Linux server failover

  - by Lukasz

  I have two Linux servers (CentOS6) - both are identically configured connected to the same switch with a direct link between them. I only have one external IP that is assigned to eth0 on both servers (connected to the internet switch) with the interface shutdown on server 2. How can I failover to server 2 if server 1 dies - as stated they are linked directly so they can check for availability of each other via ping/tcp/udp. I toyed with Heartbeat but the documentation seems to be non-existent - not sure how to bring up an interface and start some services if the other server dies.

  Read the article

• How do I get the machine name from an IP via Multicast DNS?

  - by Adam

  I have a list of IP addresses on a network, and most of them support multicast DNS. I'd like to be able to resolve the server name instead of just having the IP address. ping computer.local 64 bytes from 192.168.0.52: icmp_seq=1 ttl=64 time=5.510 ms 64 bytes from 192.168.0.52: icmp_seq=2 ttl=64 time=5.396 ms 64 bytes from 192.168.0.52: icmp_seq=3 ttl=64 time=5.273 ms Works, but I'd like to be able to determine that name from the IP. Also the devices don't necessarily broadcast any services, but definitely do support mDNS broadcast. So looking through services won't work.

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >