microsoft azure - Page 733

Business Case for investing time developing Stubs and BizUnit Tests

- by charlie.mott

I was recently in a position where I had to justify why effort should be spent developing Stubbed Integration Tests for BizTalk solutions. These tests are usually developed using the BizUnit framework. I assumed that most seasoned BizTalk developers would consider this best practice. Even though Microsoft suggest use of BizUnit on MSDN, I've not found a single site listing the justifications for investing time writing stubs and BizUnit tests. Stubs Stubs should be developed to isolate your development team from external dependencies. This is described by Michael Stephenson here. Failing to do this can result in the following problems: In contract-first scenarios, the external system interface will have been defined. But the interface may not have been setup or even developed yet for the BizTalk developers to work with. By the time you open the target location to see the data BizTalk has sent, it may have been swept away. If you are relying on the UI of the target system to see the data BizTalk has sent, what do you do if it fails to arrive? It may take time for the data to be processed or it may be scheduled to be processed later. Learning how to use the source\target systems and investigations into where things go wrong in these systems will slow down the BizTalk development effort. By the time the data is visible in a UI it may have undergone further transformations. In larger development teams working together, do you all use the same source and target instances. How do you know which data was created by whose tests? How do you know which event log error message are whose? Another developer may have “cleaned up” your data. It is harder to write BizUnit tests that clean up the data\logs after each test run. What if your B2B partners' source or target system cannot support the sort of testing you want to do. They may not even have a development or test instance that you can work with. Their single test instance may be used by the SIT\UAT teams. There may be licencing costs of setting up an instances of the external system. The stubs I like to use are generic stubs that can accept\return any message type. Usually I need to create one per protocol. They should be driven by BizUnit steps to: validates the data received; and select a response messages (or error response). Once built, they can be re-used for many integration tests and from project to project. I’m not saying that developers should never test against a real instance. Every so often, you still need to connect to real developer or test instances of the source and target endpoints\services. The interface developers may ask you to send them some data to see if everything still works. Or you might want some messages sent to BizTalk to get confidence that everything still works beyond BizTalk. Tests Automated “Stubbed Integration Tests” are usually built using the BizUnit framework. These facilitate testing of the entire integration process from source stub to target stub. It will ensure that all of the BizTalk components are configured together correctly to meet all the requirements. More fine grained unit testing of individual BizTalk components is still encouraged. But BizUnit provides much the easiest way to test some components types (e.g. Orchestrations). Using BizUnit with the Behaviour Driven Development approach described by Mike Stephenson delivers the following benefits: source: http://biztalkbddsample.codeplex.com – Video 1. Requirements can be easily defined using Given/When/Then Requirements are close to the code so easier to manage as features and scenarios Requirements are defined in domain language The feature files can be used as part of the documentation The documentation is accurate to the build of code and can be published with a release The scenarios are effective to document the scenarios and are not over excessive The scenarios are maintained with the code There’s an abstraction between the intention and implementation of tests making them easier to understand The requirements drive the testing These same tests can also be used to drive load testing as described here. If you don't do this ... If you don't follow the above “Stubbed Integration Tests” approach, the developer will need to manually trigger the tests. This has the following risks: Developers are unlikely to check all the scenarios each time and all the expected conditions each time. After the developer leaves, these manual test steps may be lost. What test scenarios are there? What test messages did they use for each scenario? There is no mechanism to prove adequate test coverage. A test team may attempt to automate integration test scenarios in a test environment through the triggering of tests from a source system UI. If this is a replacement for BizUnit tests, then this carries the following risks: It moves the tests downstream, so problems will be found later in the process. Testers may not check all the expected conditions within the BizTalk infrastructure such as: event logs, suspended messages, etc. These automated tests may also get in the way of manual tests run on these environments.

Read the article

Why bother writing an Windows 8 app?

- by Dennis Vroegop

So you want to know more about development for Window 8. Great! There are lots of reasons you should be excited about this. Since I don’t know why YOU are interested in this, I’ll make a list of reasons people can choose from. (as a side note: whenever I talk about Win8 development I am referring to the Metro Style / WinRt side of things. Apps for the ‘classic’ desktop side of Win8 on Intel are business as usual…) So… Why would you care about making an app for Windows 8? 1. It’s cool. Let’s not beat around the bush: if you like development for a hobby then you’ll love to work on this new platform. You can create apps in a relative short time (short time as in compared to writing a new CRM system) and that makes it great for a hobby product. 2. You’ll stand out. Hey, we all need an ego boost every now and then. We all need to feel special. So if you can manage to be one of the first to have you app in the Store then you’ll likely to be noticed. Just close your eyes for a moment and image you standing in a bar. It’s crowded, and then you casually say “Oh yeah, I just had my app certified and it’s in the Win8 store now”. People will stop talking, will offer you drinks and beautiful women / gorgeous man / furry creatures from Alpha Centauri (whatever your preferences are) will propose. Or maybe not. Anyway…. 3. Make some cash! IDC predicts there will be about 350,000,000 Windows 8 licenses sold in the next year. Think about that number. 350,000,000. And they all have access to the Store. Where you’re app will be. With one little click they can select it, download and somehow magically $1.00 or $2.00 from their bank account is transferred to yours. Now, I am not saying that all of those people will download and buy your app but what if only 1% of them did? Remember: there aren’t that many apps available yet….. 4. Learn. Creating new small apps is a great way to learn new stuff. Yes, you could read about it (on this blog for instance) but the only way to learn something is to do it. So be prepared for the future and learn something new by doing it.Write an app! Now! 5. The biggie (for me at least): it’s fun. Even if you remove the points above it’s still fun to write for these devices and this platform. Now some of you will say : “But why not write a great app for IOS or Android?” I think this is a valid question. Of course the novelty of the platform wears out and points 2 and 3 from above list will not be as relevant as it is today. But still 1 4 and 5 remain. And don’t forget: if you already work on the Microsoft platform it’s not that hard to learn this new Win8 stuff. If you have done some XAML development (be it WPF or Silverlight) you are almost there in becoming a good Win8 developer. So you’ll be more productive much sooner than when you have to learn Objective C or Java. Even if you’re a HTML / Javascript developer (I say developer here, not designer) you’ll be up to speed on Win8 development pretty soon. Yes, you, that funky Web Developer who lives and breathes HTML5, CSS3 and JavaScript / Node.Js / JQuery: you too can be a Win8 developer. A first class Win8 developer! So.. Download the stuff you need from http://dev.windows.com install Windows 8 and Visual Studio 12 and by the time you’re ready I’ll be working on the next article: how to do all this? Happy coding!

Read the article

2D Particle Explosion

- by TheBroodian

I'm developing a 2D action game, and in said game I've given my primary character an ability he can use to throw a fireball. I'm trying to design an effect so that when said fireball collides (be it with terrain or with an enemy) that the fireball will explode. For the explosion effect I've created a particle that once placed into game space will follow random, yet autonomic behavior based on random variables. Here is my question: When I generate my explosion (essentially 90 of these particles) I get one of two behaviors, 1) They are all generated with the same random variables, and don't resemble an explosion at all, more like a large mass of clumped sprites that all follow the same randomly generated path. 2) If I assign each particle a unique seed to its random number generator, they are a little bit -more- spread out, yet clumping is still visible (they seem to fork out into 3 different directions) Does anybody have any tips for producing particle-based 2D explosions? I'll include the code for my particle and the event I'm generating them in. Fire particle class: public FireParticle(xTile.Dimensions.Location StartLocation, ContentManager content) { worldLocation = StartLocation; fireParticleAnimation = new FireParticleAnimation(content); random = new Random(); int rightorleft = random.Next(0, 3); int upordown = random.Next(1, 3); int xVelocity = random.Next(0, 101); int yVelocity = random.Next(0, 101); Vector2 tempVector2 = new Vector2(0,0); if (rightorleft == 1) { tempVector2 = new Vector2(xVelocity, tempVector2.Y); } else if (rightorleft == 2) { tempVector2 = new Vector2(-xVelocity, tempVector2.Y); } if (upordown == 1) { tempVector2 = new Vector2(tempVector2.X, -yVelocity); } else if (upordown == 2) { tempVector2 = new Vector2(tempVector2.X, yVelocity); } velocity = tempVector2; scale = random.Next(1, 11); upwardForce = -10; dead = false; } public FireParticle(xTile.Dimensions.Location StartLocation, ContentManager content, int seed) { worldLocation = StartLocation; fireParticleAnimation = new FireParticleAnimation(content); random = new Random(seed); int rightorleft = random.Next(0, 3); int upordown = random.Next(1, 3); int xVelocity = random.Next(0, 101); int yVelocity = random.Next(0, 101); Vector2 tempVector2 = new Vector2(0, 0); if (rightorleft == 1) { tempVector2 = new Vector2(xVelocity, tempVector2.Y); } else if (rightorleft == 2) { tempVector2 = new Vector2(-xVelocity, tempVector2.Y); } if (upordown == 1) { tempVector2 = new Vector2(tempVector2.X, -yVelocity); } else if (upordown == 2) { tempVector2 = new Vector2(tempVector2.X, yVelocity); } velocity = tempVector2; scale = random.Next(1, 11); upwardForce = -10; dead = false; } #endregion #region Update and Draw public void Update(GameTime gameTime) { elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; fireParticleAnimation.Update(gameTime); Vector2 moveAmount = velocity * elapsed; xTile.Dimensions.Location newPosition = new xTile.Dimensions.Location(worldLocation.X + (int)moveAmount.X, worldLocation.Y + (int)moveAmount.Y); worldLocation = newPosition; velocity.Y += upwardForce; if (fireParticleAnimation.finishedPlaying) { dead = true; } } public void Draw(SpriteBatch spriteBatch) { spriteBatch.Draw( fireParticleAnimation.image.Image, new Rectangle((int)drawLocation.X, (int)drawLocation.Y, scale, scale), fireParticleAnimation.image.SizeAndsource, Color.White * fireParticleAnimation.image.Alpha); } Fireball explosion event: public override void Update(GameTime gameTime) { if (enabled) { float elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; foreach (Heart_of_Fire.World_Objects.Particles.FireParticle particle in explosionParticles.ToList()) { particle.Update(gameTime); if (particle.Dead) { explosionParticles.Remove(particle); } } collisionRectangle = new Microsoft.Xna.Framework.Rectangle((int)wrldPstn.X, (int)wrldPstn.Y, 5, 5); explosionCheck = exploded; if (!exploded) { coreGraphic.Update(gameTime); tailGraphic.Update(gameTime); Vector2 moveAmount = velocity * elapsed; moveAmount = horizontalCollision(moveAmount, layer); moveAmount = verticalCollision(moveAmount, layer); Vector2 newPosition = new Vector2(wrldPstn.X + moveAmount.X, wrldPstn.Y + moveAmount.Y); if (hasCollidedHorizontally || hasCollidedVertically) { exploded = true; } wrldPstn = newPosition; worldLocation = new xTile.Dimensions.Location((int)wrldPstn.X, (int)wrldPstn.Y); } if (explosionCheck != exploded) { for (int i = 0; i < 90; i++) { explosionParticles.Add(new World_Objects.Particles.FireParticle( new Location( collisionRectangle.X + random.Next(0, 6), collisionRectangle.Y + random.Next(0, 6)), contentMgr)); } } if (exploded && explosionParticles.Count() == 0) { //enabled = false; } } }

Read the article

Building Enterprise Smartphone App – Part 2: Platforms and Features

- by Tim Murphy

This is part 2 in a series of posts based on a talk I gave recently at the Chicago Information Technology Architects Group. Feel free to leave feedback. In the previous post I discussed what reasons a company might have for creating a smartphone application. In this installment I will cover some of history and state of the different platforms as well as features that can be leveraged for building enterprise smartphone applications. Platforms Before you start choosing a platform to develop your solutions on it is good to understand how we got here and what features you can leverage. History To my memory we owe all of this to a product called the Apple Newton that came out in 1987. It was the first PDA and back then I was much more of an Apple fan. I was very impressed with this device even though it never really went anywhere. The Palm Pilot by US Robotics was the next major advancement in PDA. It had a simple short hand window that allowed for quick stylus entry.. Later, Windows CE came out and started the broadening of the PDA market. After that it was the Palm and CE operating systems that started showing up on cell phones and for some time these were the two dominant operating systems that were distributed with devices from multiple hardware vendors. Current The iPhone was the first smartphone to take away the stylus and give us a multi-touch interface. It was a revolution in usability and really changed the attractiveness of smartphones for the general public. This brought us to the beginning of the current state of the market with the concept of an online store that makes it easy for customers to get new features and functionality on demand. With Android, Google made this more than a one horse race. Not only did they come to compete, their low cost actually made them the leading OS. Of course what made Android so attractive also is its major fault. It is so open that it has been a target for malware which leaves consumers exposed. Fortunately for Google though, most consumers aren’t aware of the threat that they are under. Although Microsoft had put out one of the first smart phone operating systems with CE it had to play catch up and finally came out with the Windows Phone. They have gone for a market approach between those of iOS and Android. They support multiple hardware vendors like Google, but they kept a certification process for applications that is similar to Apple. They also created a user interface that was different enough to give it a clear separation from the other two platforms. The result of all this is hundreds of millions of smartphones being sold monthly across all three platforms giving us a wide range of choices and challenges when it comes to developing solutions. Features So what are the features that make these devices flexible enough be considered for use in the enterprise? The biggest advantage of today's devices is network connectivity. The ability to access information from multiple sources at a moment’s notice is critical for businesses. Add to that the ability to communicate over a variety of text, voice and video modes and we have a powerful starting point. Every smartphone has a cameras and they are not just useful for posting to Instagram. We are seeing more applications such as Bing vision that allow us to scan just about any printed code or text to find information. These capabilities have been made available to developers in the form of standard libraries for reading barcodes of just about an flavor and optical character recognition (OCR) interpretation. Bluetooth give us the ability to communicate with multiple devices. Whether these are headsets, keyboard or printers the wireless communication capabilities are just starting to evolve. The more these wireless communication protocols grow, the more opportunities we will see to transfer data between users and a variety of devices. Local storage of information that can be called up even when the device cannot reach the network is the other big capability. This give users the ability to work offline as well and transmit information when connections are restored. These are the tools that we have to work with to build applications that can be leveraged to gain a competitive advantage for companies that implement them. Coming Up In the third installment I will cover key concerns that you face when building enterprise smartphone apps. del.icio.us Tags: smartphones,enterprise smartphone Apps,architecture,iOS,Android,Windows Phone

Read the article

Rebuilding CoasterBuzz, Part II: Hot data objects

- by Jeff

This is the second post, originally from my personal blog, in a series about rebuilding one of my Web sites, which has been around for 12 years. More: Part I: Evolution, and death to WCF After the rush to get moving on stuff, I temporarily lost interest. I went almost two weeks without touching the project, in part because the next thing on my backlog was doing up a bunch of administrative pages. So boring. Unfortunately, because most of the site's content is user-generated, you need some facilities for editing data. CoasterBuzz has a database full of amusement parks and roller coasters. The entities enjoy the relationships that you would expect, though they're further defined by "instances" of a coaster, to define one that has moved between parks as one, with different names and operational dates. And of course, there are pictures and news items, too. It's not horribly complex, except when you have to account for a name change and display just the newest name. In all previous versions, data access was straight SQL. As so much of the old code was rooted in 2003, with some changes in 2008, there wasn't much in the way of ORM frameworks going on then. Let me rephrase that, I mostly wasn't interested in ORM's. Since that time, I used a little LINQ to SQL in some projects, and a whole bunch of nHibernate while at Microsoft. Through all of that experience, I have to admit that these frameworks are often a bigger pain in the ass than not. They're great for basic crud operations, but when you start having all kinds of exotic relationships, they get difficult, and generate all kinds of weird SQL under the covers. The black box can quickly turn into a black hole. Sometimes you end up having to build all kinds of new expertise to do things "right" with a framework. Still, despite my reservations, I used the newer version of Entity Framework, with the "code first" modeling, in a science project and I really liked it. Since it's just a right-click away with NuGet, I figured I'd give it a shot here. My initial effort was spent defining the context class, which requires a bit of work because I deviate quite a bit from the conventions that EF uses, starting with table names. Then throw some partial querying of certain tables (where you'll find image data), and you're splitting tables across several objects (navigation properties). I won't go into the details, because these are all things that are well documented around the Internet, but there was a minor learning curve there. The basics of reading data using EF are fantastic. For example, a roller coaster object has a park associated with it, as well as a number of instances (if it was ever relocated), and there also might be a big banner image for it. This is stupid easy to use because it takes one line of code in your repository class, and by the time you pass it to the view, you have a rich object graph that has everything you need to display stuff. Likewise, editing simple data is also, well, simple. For this goodness, thank the ASP.NET MVC framework. The UpdateModel() method on the controllers is very elegant. Remember the old days of assigning all kinds of properties to objects in your Webforms code-behind? What a time consuming mess that used to be. Even if you're not using an ORM tool, having hydrated objects come off the wire is such a time saver. Not everything is easy, though. When you have to persist a complex graph of objects, particularly if they were composed in the user interface with all kinds of AJAX elements and list boxes, it's not just a simple matter of submitting the form. There were a few instances where I ended up going back to "old-fashioned" SQL just in the interest of time. It's not that I couldn't do what I needed with EF, it's just that the efficiency, both my own and that of the generated SQL, wasn't good. Since EF context objects expose a database connection object, you can use that to do the old school ADO.NET stuff you've done for a decade. Using various extension methods from POP Forums' data project, it was a breeze. You just have to stick to your decision, in this case. When you start messing with SQL directly, you can't go back in the same code to messing with entities because EF doesn't know what you're changing. Not really a big deal. There are a number of take-aways from using EF. The first is that you write a lot less code, which has always been a desired outcome of ORM's. The other lesson, and I particularly learned this the hard way working on the MSDN forums back in the day, is that trying to retrofit an ORM framework into an existing schema isn't fun at all. The CoasterBuzz database isn't bad, but there are design decisions I'd make differently if I were starting from scratch. Now that I have some of this stuff done, I feel like I can start to move on to the more interesting things on the backlog. There's a lot to do, but at least it's fun stuff, and not more forms that will be used infrequently.

Read the article

Creating SparseImages for Pivot

- by John Conwell

Learning how to programmatically make collections for Microsoft Live Labs Pivot has been a pretty interesting ride. There are very few examples out there, and the folks at MS Live Labs are often slow on any feedback. But that is what Reflector is for, right? Well, I was creating these InfoCard images (similar to the Car images in the "New Cars" sample collection that that MS created for Pivot), and wanted to put a Tag Cloud into the info card. The problem was the size of the tag cloud might vary in order for all the tags to fit into the tag cloud (often times being bigger than the info card itself). This was because the varying word lengths and calculated font sizes. So, to fix this, I made the tag cloud its own separate image from the info card. Then, I would create a sparse image out of the two images, where the tag cloud fit into a small section of the info card. This would allow the user to see the info card, but then zoom into the tag cloud and see all the tags at a normal resolution. Kind'a cool. But...I couldn't find one code example (not one!) of how to create a sparse image. There is one page on the SeaDragon site (http://www.seadragon.com/developer/creating-content/deep-zoom-tools/) that gives over the API for creating images and collections, and it sparsely goes over how to create a sparse image, but unless you are familiar with the API already, the documentation doesn't help very much. The key is the Image.ViewportWidth and Image.ViewportOrigin properties of the image that is getting super imposed on the main image. I'll walk through the code below. I've setup a couple Point structs to represent the parent and sub image sizes, as well as where on the parent I want to position the sub image. Next, create the parent image. This is pretty straight forward. Then I create the sub image. Then I calculate several ratios; the height to width ratio of the sub image, the width ratio of the sub image to the parent image, the height ratio of the sub image to the parent image, then the X and Y coordinates on the parent image where I want the sub image to be placed represented as a ratio of the position to the parent image size. After all these ratios have been calculated, I use them to calculate the Image.ViewportWidth and Image.ViewportOrigin values, then pass the image objects into the SparseImageCreator and call Create. The key thing that was really missing from the API documentation page is that when setting up your sub images, everything is expressed in a ratio in relation to the main parent image. If I had known this, it would have saved me a lot of trial and error time. And how did I figure this out? Reflector of course! There is a tool called Deep Zoom Composer that came from MS Live Labs which can create a sparse image. I just dug around the tool's code until I found the method that create sparse images. But seriously...look at the API documentation from the SeaDragon size and look at the code below and tell me if the documentation would have helped you at all. I don't think so! public static void WriteDeepZoomSparseImage(string mainImagePath, string subImagePath, string destination) { Point parentImageSize = new Point(720, 420); Point subImageSize = new Point(490, 310); Point subImageLocation = new Point(196, 17); List<Image> images = new List<Image>(); //create main image Image mainImage = new Image(mainImagePath); mainImage.Size = parentImageSize; images.Add(mainImage); //create sub image Image subImage = new Image(subImagePath); double hwRatio = subImageSize.X/subImageSize.Y; // height width ratio of the tag cloud double nodeWidth = subImageSize.X/parentImageSize.X; // sub image width to parent image width ratio double nodeHeight = subImageSize.Y / parentImageSize.Y; // sub image height to parent image height ratio double nodeX = subImageLocation.X/parentImageSize.X; //x cordinate position on parent / width of parent double nodeY = subImageLocation.Y / parentImageSize.Y; //y cordinate position on parent / height of parent subImage.ViewportWidth = (nodeWidth < double.Epsilon) ? 1.0 : (1.0 / nodeWidth); subImage.ViewportOrigin = new Point( (nodeWidth < double.Epsilon) ? -1.0 : (-nodeX / nodeWidth), (nodeHeight < double.Epsilon) ? -1.0 : ((-nodeY / nodeHeight) / hwRatio)); images.Add(subImage); //create sparse image SparseImageCreator creator = new SparseImageCreator(); creator.Create(images, destination); }

Read the article

jQuery Templates, Data Link

- by Renso

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Query Templates, Data Link, and Globalization I am sure you must have read Scott Guthrie’s blog post about jQuery support and officially supporting jQuery's templating, data linking and globalization, if not here it is: jQuery Templating Since we are an open source shop and use jQuery and jQuery plugins extensively to say the least, decided to look into the templating a bit and see what data linking is all about. For those not familiar with those terms here is the summary, plenty of material out there on what it is, but here is what in my experience it means: jQuery Templating: A templating engine that allows you to specify a client-side template where you indicate which properties/tags you want dynamically updated. You in a sense specify which parts of the html is dynamic and since it is pluggable you are able to use tools data jQuery data linking and others to let it sync up your template with data. What makes it more powerful is that you can easily work with rows of data, adding and removing rows. Once the template has been generated, which you do dynamically on a client-side event, you then append/inject the resulting template somewhere in your DOM, like for example you would get a JSON object from the database, map it to your template, it populates the template with your data in the indicated places, and then let’s say for example append it to a row in a table. I have not found it that useful for lets say a single record of data since you could easily just get a partial view from the server via an html type ajax call. It really shines when you dynamically add/remove rows from a list in the DOM. I have not found an alternative that meets the functionality of the jQuery template and helps of course that Microsoft officially supports it. In future versions of the jQuery plug-in it may even ship as part of the standard jQuery library and with future versions of Visual Studio. jQuery Data Linking: In short I was fascinated by it initially by how with one line of code I can sync up my JSON object with my form elements. That's where my enthusiasm stopped. It was one-line to let is deal with syncing up your form with your JSON object, but it is not bidirectional as they state and I tried all the work arounds they suggested and none of them work. The problem is that when you update your JSON object it DOES NOT sync it up with your form. In an example, accounts are being edited client side by selecting the account from a list by clicking on the row, it then fetches the entire account JSON object via ajax json-type call and then refreshes the form with the account’s details from the new JSON object. What is the use of syncing up my JSON with the form if I still have to programmatically sync up my new JSON object with each DOM property?! So you may ask: “what is the alternative”? Good question and the same one I was pondering, maybe I can just use it for keeping my from n sync with my JSON object so I can post that JSON object back to the server and update my database. That’s when I discovered Knockout: Knockout It addresses the issues mentioned above and also supports event handling through the observer pattern. Not wanting to go into detail here, Steve Sanderson, the creator of Knockout, has already done a terrific job of that, thanks Steve for a great plug-in! Best of all it integrates perfectly with the jQuery Templating engine as well. I have not found an alternative to this plugin that supports the depth and width of functionality and would recommend it to anyone. The only drawback is the embedded html attributes (data-bind=””) tags that you have to add to the HTML, in my opinion tying your behavior to your HTML, where I like to separate behavior from HTML as well as CSS, so the HTML is purely to define content, not styling or behavior. But there are plusses to this as well and also a nifty work around to this that I will just shortly mention here with an example. Instead of data binding an html tag with knockout event handling like so: <%=Html.TextBox("PrepayDiscount", String.Empty, new { @class = "number" })%> Do: <%=Html.DataBoundTextBox("PrepayDiscount", String.Empty, new { @class = "number" })%> The html extension above then takes care of the internals and you could then swap Knockout for something else if you want to inside the extension and keep the HTML plugin agnostic. Here is what the extension looks like, you can easily build a whole library to support all kinds of data binding options from this: public static class HtmlExtensions { public static MvcHtmlString DataBoundTextBox(this HtmlHelper helper, string name, object value, object htmlAttributes) { var dic = new RouteValueDictionary(htmlAttributes); dic.Add("data-bind", String.Format("value: {0}", name)); return helper.TextBox(name, value, dic); } } Hope this helps in making a decision when and where to consider jQuery templating, data linking and Knockout.

Read the article

XNA - Use Mouse To Rotate & Arrow Keys To Scroll A Linearly Wrapped Texture:

- by The Thing

Using XNA I'm working on my first, relatively simple, videogame for the PC. At the moment my game window is 1024 X 768 and I have a 'Starfield' linearly wrapped background texture 1280 X 1280 in size whose origin has been set to its center point (width / 2, height / 2). This texture is drawn onscreen using (graphics.PreferredBackBufferWidth / 2, graphics.PreferredBackBufferHeight / 2) to place the origin in the center of the window. I want to be able to use the horizontal movement of the mouse to rotate my texture left or right and use the arrow keys to scroll the texture in four directions. From my own related coding experiments I have found that once I rotate the texture it no longer scrolls in the direction I want, it's as if somehow the XNA framework's 'sense of direction' has been 'rotated' along with the texture. As an example of what I've described above lets say I rotate the texture 45 degrees to the right, then pressing the up arrow key results in the texture scrolling diagonally from top-right to bottom-left. This is not what I want, regardless of the degree or direction of rotation I want my texture to scroll straight up, straight down, or to the left or right depending on which arrow key was pressed. How do I go about accomplishing this? Any help or guidance is appreciated. To finish up there are two points I'd like to clarify: [1] The reason I'm using linear wrapping on my starfield texture is that it gives a nice impression of an endless starfield. [2] Using a texture at least 1280 X 1280 in conjunction with a game window of 1024 X 768 means that at no point in it's rotation will the edges of the texture become visible. Thanks for reading..... Update # 1 - as requested by RCIX: The code below is what I was referring to earlier when I mentioned 'related coding experiments'. As you can see I am scrolling a linearly wrapped texture in the direction I've moved the mouse relative to the center of the screen. This works perfectly if I don't rotate the texture, but once I do rotate it the direction of the scrolling gets messed up for some reason. public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; int x; int y; float z = 250f; Texture2D Overlay; Texture2D RotatingBackground; Rectangle? sourceRectangle; Color color; float rotation; Vector2 ScreenCenter; Vector2 Origin; Vector2 scale; Vector2 Direction; SpriteEffects effects; float layerDepth; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } protected override void Initialize() { graphics.PreferredBackBufferWidth = 1024; graphics.PreferredBackBufferHeight = 768; graphics.ApplyChanges(); Direction = Vector2.Zero; IsMouseVisible = true; ScreenCenter = new Vector2(graphics.PreferredBackBufferWidth / 2, graphics.PreferredBackBufferHeight / 2); Mouse.SetPosition((int)graphics.PreferredBackBufferWidth / 2, (int)graphics.PreferredBackBufferHeight / 2); sourceRectangle = null; color = Color.White; rotation = 0.0f; scale = new Vector2(1.0f, 1.0f); effects = SpriteEffects.None; layerDepth = 1.0f; base.Initialize(); } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); Overlay = Content.Load<Texture2D>("Overlay"); RotatingBackground = Content.Load<Texture2D>("Background"); Origin = new Vector2((int)RotatingBackground.Width / 2, (int)RotatingBackground.Height / 2); } protected override void UnloadContent() { } protected override void Update(GameTime gameTime) { float timePassed = (float)gameTime.ElapsedGameTime.TotalSeconds; MouseState ms = Mouse.GetState(); Vector2 MousePosition = new Vector2(ms.X, ms.Y); Direction = ScreenCenter - MousePosition; if (Direction != Vector2.Zero) { Direction.Normalize(); } x += (int)(Direction.X * z * timePassed); y += (int)(Direction.Y * z * timePassed); //No rotation = texture scrolls as intended, With rotation = texture no longer scrolls in the direction of the mouse. My update method needs to somehow compensate for this. //rotation += 0.01f; base.Update(gameTime); } protected override void Draw(GameTime gameTime) { spriteBatch.Begin(SpriteSortMode.Deferred, null, SamplerState.LinearWrap, null, null); spriteBatch.Draw(RotatingBackground, ScreenCenter, new Rectangle(x, y, RotatingBackground.Width, RotatingBackground.Height), color, rotation, Origin, scale, effects, layerDepth); spriteBatch.Draw(Overlay, Vector2.Zero, Color.White); spriteBatch.End(); base.Draw(gameTime); } }

Read the article

What to "CRM" in San Francisco? CRM Highlights for OpenWorld '12

- by Richard Lefebvre

There is plenty to SEE for CRM during OpenWorld in San Francisco, September 30 - October 4! Here are some of the sessions in the CRM Track that you might want to consider attending for products you currently own or might consider for the future. I think you'll agree, there is quite a bit of investment going on across Oracle CRM. Please use OpenWorld Schedule Builder or check the OpenWorld Content Catalog for all of the session details and any time or location changes. Tip: Pre-enrolled session registrants via Schedule Builder are allowed into the session rooms before anyone else, so Schedule Builder will guarantee you a seat. Many of the sessions below will likely be at capacity. General Session: Oracle Fusion CRM—Improving Sales Effectiveness, Efficiency, and Ease of Use (Session ID: GEN9674) - Oct 2, 11:45 AM - 12:45 PM. Anthony Lye, Senior VP, Oracle leads this general session focused on Oracle Fusion CRM. Oracle Fusion CRM optimizes territories, combines quota management and incentive compensation, integrates sales and marketing, and cleanses and enriches data—all within a single application platform. Oracle Fusion can be configured, changed, and extended at runtime by end users, business managers, IT, and developers. Oracle Fusion CRM can be used from the Web, from a smartphone, from Microsoft Outlook, or from an iPad. Deloitte, sponsor of the CRM Track, will also present key concepts on CRM implementations. Oracle Fusion Customer Relationship Management: Overview/Strategy/Customer Experiences/Roadmap (CON9407) - Oct 1, 3:15PM - 4:15PM. In this session, learn how Oracle Fusion CRM enables companies to create better sales plans, generate more quality leads, and achieve higher win rates and find out why customers are adopting Oracle Fusion CRM. Gain a deeper understanding of the unique capabilities only Oracle Fusion CRM provides, and learn how Oracle’s commitment to CRM innovation is driving a wide range of future enhancements. Oracle RightNow CX Cloud Service Vision and Roadmap (CON9764) - Oct 1, 10:45 AM - 11:45 AM. Oracle RightNow CX Cloud Service combines Web, social, and contact center experiences for a unified, cross-channel service solution in the cloud, enabling organizations to increase sales and adoption, build trust, strengthen relationships, and reduce costs and effort. Come to this session to hear from Oracle experts about where the product is going and how Oracle is committed to accelerating the pace of innovation and value to its customers. Siebel CRM Overview, Strategy, and Roadmap (CON9700) - Oct 1, 12:15PM - 1:15PM. The world’s most complete CRM solution, Oracle’s Siebel CRM helps organizations differentiate their businesses. Come to this session to learn about the Siebel product roadmap and how Oracle is committed to accelerating the pace of innovation and value for its customers on this platform. Additionally, the session covers how Siebel customers can leverage many Oracle assets such as Oracle WebCenter Sites; InQuira, RightNow, and ATG/Endeca applications, and Oracle Policy Automation in conjunction with their current Siebel investments. Oracle Fusion Social CRM Strategy and Roadmap: Future of Collaboration and Social Engagement (CON9750) - Oct 4, 11:15 AM - 12:15 PM. Social is changing the customer experience! Come find out how Oracle can help you know your customers better, encourage brand affinity, and improve collaboration within your ecosystem. This session reviews Oracle’s social media solution and shows how you can discover hidden insights buried in your enterprise and social data. Also learn how Oracle Social Network revolutionizes how enterprise users work, collaborate, and share to achieve successful outcomes. Oracle CRM On Demand Strategy and Roadmap (CON9727) - Oct 1, 10:45AM - 11:45AM. Oracle CRM On Demand is a powerful cloud-based customer relationship management solution. Come to this session to learn directly from Oracle experts about future product plans and hear how Oracle is committed to accelerating the pace of innovation and value to its customers. Knowledge Management Roadmap and Strategy (CON9776) - Oct 1, 12:15PM - 1:15PM. Learn how to harness the knowledge created as a natural byproduct of day-to-day interactions to lower costs and improve customer experience by delivering the right answer at the right time across channels. This session includes an overview of Oracle’s product roadmap and vision for knowledge management for both the Oracle RightNow and Oracle Knowledge (formerly InQuira) product families. Oracle Policy Automation Roadmap: Supercharging the Customer Experience (CON9655) - Oct 1, 12:15PM - 1:15PM. Oracle Policy Automation delivers rapid customer value by streamlining the capture, analysis, and deployment of policies across every facet of the customer experience. This session discusses recent Oracle Policy Automation enhancements for policy analytics; the latest Oracle Policy Automation Connector for Siebel; and planned new capabilities, including availability with the Oracle RightNow product line. There is much more, so stay tuned for more highlights or check out the Content Catalog and search for your areas of interest.

Read the article

c# display DB table structure

- by user3529643

I have a question. My code is the following : public partial class Form1 : Form { public OleDbConnection datCon; public string MyDataFile; public ArrayList tblArray; public ArrayList fldArray; public Form1() { InitializeComponent(); lvData.Clear(); lvData.View = View.Details; lvData.LabelEdit = false; lvData.FullRowSelect = true; lvData.GridLines = true; } private void DataConnection() { MyDataFile = Application.StartupPath + @"\studenti.mdb"; string MyCon = @"provider=microsoft.jet.oledb.4.0;data source=" + MyDataFile; try { datCon = new OleDbConnection(MyCon); } catch (Exception ex) { MessageBox.Show(ex.Message); } FillTreeView(); } private void GetTables(OleDbConnection cnn) { try { cnn.Open(); DataTable schTable = cnn.GetOleDbSchemaTable(OleDbSchemaGuid.Tables, new Object[] { null, null, null, "TABLE" }); tblArray = new ArrayList(); foreach (DataRow datrow in schTable.Rows) { tblArray.Add(datrow["TABLE_NAME"].ToString()); } cnn.Close(); } catch (Exception ex) { MessageBox.Show(ex.Message); } } private void GetFields(OleDbConnection cnn, string tabNode) { string tabName; try { tabName = tabNode; cnn.Open(); DataTable schTable = cnn.GetOleDbSchemaTable(OleDbSchemaGuid.Columns, new Object[] { null, null, tabName }); fldArray = new ArrayList(); foreach (DataRow datRow in schTable.Rows) { fldArray.Add(datRow["COLUMN_NAME"].ToString()); } cnn.Close(); } catch (Exception ex) { MessageBox.Show(ex.Message); } } private void FillTreeView() { tvData.Nodes.Clear(); tvData.Nodes.Add("Database"); tvData.Nodes[0].Tag = "RootDB"; GetTables(datCon); // add table node for (int i = 0; i < tblArray.Count; i++) { tvData.Nodes[0].Nodes.Add(tblArray[i].ToString()); tvData.Nodes[0].Nodes[i].Tag = "Tables"; } // add field node for (int i = 0; i < tblArray.Count; i++) { GetFields(datCon, tblArray[i].ToString()); for (int j = 0; j < fldArray.Count; j++) { tvData.Nodes[0].Nodes[i].Nodes.Add(fldArray[j].ToString()); tvData.Nodes[0].Nodes[i].Nodes[j].Tag = "Fields"; } } this.tvData.ContextMenuStrip = contextMenuStrip1; contextMenuStrip1.ItemClicked +=contextMenuStrip1_ItemClicked; } public void FillListView(OleDbConnection cnn, string tabName) { OleDbCommand cmdRead; OleDbDataReader datReader; string strField; lblTableName.Text = tabName; strField = "SELECT * FROM [" + tabName + "]"; // Initi cmdRead obiect cmdRead = new OleDbCommand(strField, cnn); cnn.Open(); datReader = cmdRead.ExecuteReader(); // fill ListView while (datReader.Read()) { ListViewItem objListItem = new ListViewItem(datReader.GetValue(0).ToString()); for (int c = 1; c < datReader.FieldCount; c++) { objListItem.SubItems.Add(datReader.GetValue(c).ToString()); } lvData.Items.Add(objListItem); } datReader.Close(); cnn.Close(); } private void ViewToolStripMenuItem_Click(object sender, EventArgs e) { DataConnection(); } public void tvData_AfterExpand(object sender, System.Windows.Forms.TreeViewEventArgs e) { string tabName; int fldCount; if (e.Node.Tag.ToString() == "Tables") { fldCount = e.Node.GetNodeCount(false); //column headers. int n = lvData.Width; double wid = n / fldCount; // width columnn for (int c = 0; c < fldCount; c++) { lvData.Columns.Add(e.Node.Nodes[c].Text, (int)wid, HorizontalAlignment.Left); } // gett table name tabName = e.Node.Text; FillListView(datCon, tabName); } } public void button1_Click(object sender, EventArgs e) { //TO DO?? } } I have a treeview populated with tables (nodes) from my database, and a listview which is populated with the data from my tables when I click on a table. As you can see I have a button1 on my form. When I click it I want it to display to me the structure of the table I selected in my treeview (a treeview node). Not too many details, just the name of the columns in my table, type of columns, primary keys. I've tried to follow many tutorials but I can t seem to manage it.

Read the article

BizTalk 2009 - Custom Functoid Wizard

- by StuartBrierley

When creating BizTalk maps you may find that there are times when you need perform tasks that the standard functoids do not cover. At other times you may find yourself reapeating a pattern of standard functoids over and over again, adding visual complexity to an otherwise simple process. In these cases you may find it preferable to create your own custom functoids. In the past I have created a number of custom functoids from scratch, but recently I decided to try out the Custom Functoid Wizard for BizTalk 2009. After downloading and installing the wizard you should start Visual Studio and select to create a new BizTalk Server Functoid Project. Following the splash screen you will be presented with the General Properties screen, where you can set the classname, namespace, assembly name and strong name key file. The next screen is the first set of properties for the functoid. First of all is the fuctoid ID; this must be a value above 6000. You should also then set the name, tooltip and description of the functoid. The name will appear in the visual studio toolbox and the tooltip on hover over in the toolbox. The descrition will be shown when you configure the functoid inputs when using it in a map; as such it should provide a decent level of information to allow the functoid to be used. Next you must set the category, exception mesage, icon and implementation language. The category will affect the positioning of the functoid within the toolbox and also some of the behaviours of the functoid. We must then define the parameters and connections for our new functoid. Here you can define the names and types of your input parameters along with the minimum and maximum number of input connections. You will also need to define the types of connections accepted and the output type of the functoid. Finally you can click finish and your custom functoid project will be created. The results of this process can be seen in the solution explorer, where you will see that a project, functoid class file and a resource file have been created for you. If you open the class file you will see that the following code has been created for you: The "base" function sets all the properties that you previsouly detailed in the custom functoid wizard. public TestFunctoids():base() { int functoidID; // This has to be a number greater than 6000 functoidID = System.Convert.ToInt32(resmgr.GetString("FunctoidId")); this.ID = functoidID; // Set Resource strings, bitmaps SetupResourceAssembly(ResourceName, Assembly.GetExecutingAssembly()); SetName("FunctoidName"); SetTooltip("FunctoidToolTip"); SetDescription("FunctoidDescription"); SetBitmap("FunctoidBitmap"); // Minimum and maximum parameters that the functoid accepts this.SetMinParams(2); this.SetMaxParams(2); /// Function name that needs to be called when this Functoid is invoked. /// Put this in GAC. SetExternalFunctionName(GetType().Assembly.FullName, "MyCompany.BizTalk.Functoids.TestFuntoids.TestFunctoids", "Execute"); // Category for this functoid. this.Category = FunctoidCategory.String; // Input and output Connection type this.OutputConnectionType = ConnectionType.AllExceptRecord; AddInputConnectionType(ConnectionType.AllExceptRecord); } The "Execute" function provides a skeleton function that contains the code to be executed by your new functoid. The inputs and outputs should match those you defined in the Custom Functoid Wizard. public System.Int32 Execute(System.Int32 Cool) { ResourceManager resmgr = new ResourceManager(ResourceName, Assembly.GetExecutingAssembly()); try { // TODO: Implement Functoid Logic } catch (Exception e) { throw new Exception(resmgr.GetString("FunctoidException"), e); } } Opening the resource file you will see some of the various string values that you defined in the Custom Functoid Wizard - Name, Tooltip, Description and Exception. You can also select to look at the image resources. This will display the embedded icon image for the functoid. To change this right click the icon and select "Import from File". Once you have completed the skeleton code you can then look at trying out your functoid. To do this you will need to build the project, copy the compiled DLL to C:\Program Files\Microsoft BizTalk Server 2009\Developer Tools\Mapper Extensions and then refresh the toolbox in visual studio.

Read the article

How to fix Ubuntu 12.04.3 boot to black screen full of errors in white text, after upgrading on dell inspiron 1501

- by Ibuntu

I am running a Dell Inspiron 1501 I use Linux only. No Microsoft or Apple operating systems (or really anything closed-source). I've only been using Linux for a little over a year but I'm starting to gain a comfortable level of familiarity with the system and terminology. I've been having some issues with Quantel Quetzal and Raring Ringtail, especially with older hardware, so I opted to install Ubuntu 12.04.3 Precise Pangolin on the Inspiron 1501. I checked my MD5 sum after downloading my ISO and all was good. I have in fact used this iso/dvd to install Precise Pangolin successfully on a few other systems (some of which are even older than this laptop). Install goes fine. The wireless card doesn't work out of the box but this is a known issue which is fairly easy to fix. So, first thing I did was open up a terminal and run sudo apt-get update && sudo apt-get upgrade which, part way through, crashed (I assume lightdm and possibly X) and took me to a black screen filled with white lines of text that were either errors or just the ouputs of commands. The reason I say that is because I was unable to gleam any useful information from the output on the screen. I did take a picture however and will post a link. After that, every time I boot the system it goes right to that black screen posting all the error messages or output in white text. I never get a purple Ubuntu splash, so from what I can tell after reading this wiki article: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen That means that after the kernel is selected, it is unable to correctly implement the settings it needs. If the purple splash never shows, the frame buffer was never set correctly right? This leads me to believe that it could be a kernel issue? The wiki suggested to try and pinpoint the issue by rolling back kernels until I find one that works. Is this my best option? I think I'm going to give it a try anyways and will let everyone know if I am able to solve the issue this way. I have since done a few reinstalls and some trouble-shooting including a couple hours scouring the net for anyone with any kind of similar issue. Most of the issues I could find involved getting a black screen after login and none of them said anything about any information output on this black screen. My reinstalls have taught me that there is no issue updating, but as soon as I run sudo apt-get upgrade my system goes to the black screen and every time I boot it up it does the same thing. The only way to fix is by reinstall. I never get any ability to log in. After a hard power off to the laptop (because I cannot use ctrl+alt+del to reboot) when it boots again it goes to the grub boot menu and I can select between regular boot, recovery mode and the two memtest options. I never tried the memtest options but the other two both lead to the same black screen. Some people having a black/blank screen issue claim to have fixed it by using 12.10 or 13.04 but I believe they were having a different issue where they got a black/blank screen after logging in. I think I will still give these images a try, but mostly figured I would just wait another day or two for 13.10. Other things I figured I would try from the following three articles: After logging in, there's a black screen and my cursor, nothing else! in Ubuntu 12.10 Black Screen on Login After Upgrading to 12.04 I can't get to the login screen include opening a terminal using ctrl+alt+f1 and trying a variety of reseting unity, x settings, lightdm (or switching to gdm); but I doubt this will work or that I will even be able to access a terminal. I'm pretty sure the whole system is stuck after it loads the last line on the black screen. I will try these things and post more information when I have. Hopefully someone has an idea in the meantime and I will keep checking back trying to find a solution. Thank you. Here are 3 different pictures of the error message. I had to take with my phone: http://ubuntuone.com/album/0TBBkxmVajJIQQtoN9mVdN

Read the article

Windows 8 for productivity?

- by Charles Young

At long last I’ve started using Windows 8. I boot from a VHD on which I have installed Office, Visio, Visual Studio, SQL Server, etc. For a week, now, I’ve been happily writing code and documents and using Visio and PowerPoint. I am, very much, a ‘productivity’ user rather than a content consumer. I spend my days flitting between countless windows and browser tabs displayed across dual monitors. I need to access a lot of different functionality and information in as fluid a fashion as possible. With that in mind, and like so many others, I was worried about Windows 8. The Metro interface is primarily about content consumption on touch-enabled screens, and not really geared for people like me sitting in front of an 8-core non-touch laptop and an additional Samsung monitor. I still use a mouse, not my finger. And I create more than I consume. Clearly, Windows 8 won’t be viable for people like me unless Metro keeps out of my hair when using productivity and development tools. With this in mind, I had long expected Microsoft to provide some mechanism for switching Metro off. There was a registry hack in last year’s Developer Preview, but this capability has been removed. That’s brave. So, how have things worked out so far? Well, I am really quite surprised. When I played with the Developer Preview last year, it was clear that Metro was unfinished and didn’t play well enough with the desktop. Obviously I expected things to improve, but the context switching from desktop to full-screen seemed a heavy burden to place on users. That sense of abrupt change hasn’t entirely gone away (how could it), but after a few days, I can’t say that I find it burdensome or irritating. I’ve got used very quickly to ‘gesturing’ with my mouse at the bottom or top right corners of the screen to move between applications, using the Windows key to toggle the Start screen and generally finding my way around. I am surprised at how effective the Start screen is, given the rather basic grouping features it provides. Of course, I had to take control of it and sort things the way I want. If anything, though, the Start screen provides a better navigation and application launcher tool than the old Start menu. What I didn’t expect was the way that Metro enhances the productivity story. As I write this, I’ve got my desktop open with a maximised Word window. However, the desktop extends only across about 85% of the width of my screen. On the left hand side, I have a column that displays the new Metro email client. This is currently showing me a list of emails for my main work account. I can flip easily between different accounts and read my email within that same column. As I work on documents, I want to be able to monitor my inbox with a quick glance. The desktop, of course, has its own snap feature. I could run the desktop full screen and bring up Outlook and Word side by side. However, this doesn’t begin to approach the convenience of snapping the Metro email client. Consider that when I snap a window on the desktop, it initially takes up 50% of the screen. Outlook doesn’t really know anything about snap, and doesn’t adjust to make effective use of the limited screen estate. Even at 50% screen width, it is difficult to use, so forget about trying to use it in a Metro fashion. In any case, I am left with the prospect of having to manually adjust everything to view my email effectively alongside Word. Worse, there is nothing stopping another window from overlapping and obscuring my email. It becomes a struggle to keep sight of email as it arrives. Of course, there is always ‘toast’ to notify me when things arrive, but if Outlook is obscured, this just feels intrusive. The beauty of the Metro snap feature is that my email reader now exists outside of my desktop. The Metro app has been crafted to work well in the fixed width column as well as in full-screen. It cannot be obscured by overlapping windows. I still get notifications if I wish. More importantly, it is clear that careful attention has been given to how things work when moving between applications when ‘snapped’. If I decide, say to flick over to the Metro newsreader to catch up with current affairs, my desktop, rather than my email client, obligingly makes way for the reader. With a simple gesture and click, or alternatively by pressing Windows-Tab, my desktop reappears. Another pleasant surprise is the way Windows 8 handles dual monitors. It’s not just the fact that both screens now display the desktop task bar. It’s that I can so easily move between Metro and the desktop on either screen. I can only have Metro on one screen at a time which makes entire sense given the ‘full-screen’ nature of Metro apps. Using dual monitors feels smoother and easier than previous versions of Windows. Overall then, I’m enjoying the Windows 8 improvements. Strangely, for all the hype (“Windows reimagined”, etc.), my perception as a ‘productivity’ user is more one of evolution than revolution. It all feels very familiar, but just better.

Read the article

Windows Phone 8 Launch Event Summary

- by Tim Murphy

Today was the official coming out party for Windows Phone 8. Below is a summary of the launch event. There is a lot here to stay with me. They started with a commercial staring Joe Belfiore show how his Windows Phone 8 was personal too him which highlights something I think Microsoft has done well over the last couple of event: spotlight how Windows Phone is a different experience from other smartphones. Joe actually called iPhone and Android “tired old metaphors" and explained that the idea around Windows Phone was to “reinvent the smartphone around you” as “the most personal smartphone operating system”. The is the message that they need to drive home in their adds. The only real technical aspect we found out was that they have optimized the operating system around the dual core Qualcomm Snapdragon chip set. It seems like all of the other hardware goodies had already been announced. The remainder of the event was centered around new features of the OS and app announcements. So what are we getting? The integrated features included lock screen live tile, Data Sense, Rooms and Kids corner. There wasn’t a lot of information about it, but Joe also talked about apps not just having live tiles, but being live apps that could integrate with wallet and the hub. The lock screen will now be able to be personalized with live tile data or even a photo slide show. This gives the lock screen an even better ability to give you the information you want to know before you even unlock the phone. The Kids Corner allows you as a parent to setup an area on your phone that you kids can go into an use it without disturbing your apps. They can play games or use apps that you have designated and will only see those apps. It even has a special lock screen gesture just for the kids corner. Rooms allow you to organize your phone around the groups of people in your life. You get a shared calendar, a room wall as well as shared notes beyond just being able to send messages to a group. You can also invite people not on the Windows Phone platform to access an online version of the room. Data Sense is a new feature that gives you better control and understanding of your data plan usage. You can see which applications are using data and it can automatically adjust they way your phone behaves as you get close to your data limit. Add to these features the fact that the entire Windows ecosystem is integrated with SkyDrive and you have an available anywhere experience that is unequaled by any other platform. Your document, photos and music are available on your Windows Phone, Window 8 device and Xbox. SkyDrive also doesn’t limit how long you can keep files like the competing cloud platforms and give more free storage. It was interesting the way they made the launch event more personal. First Joe brought out his own kids to demo the Kids Corner. They followed this up by bringing out Jessica Alba to discuss her experience on the Windows Phone 8. They need to keep putting a face on the product instead of just showing features as a cold list. Then we get to apps. We knew that the new Skype was coming, but we found out that it was created in such a way that it can receive calls without running consistently in the background which would eat up battery. This announcement was follow by the coming Facebook app that is optimized for Windows Phone 8. As a matter of fact they indicated that just after launch the marketplace would have 46 out of the top 50 apps used by all smartphone platforms. In a rational world this tide with over 120,000 apps currently in the marketplace there should be no more argument about the Windows Phone ecosystem. For those of us who develop for Windows Phone and weren’t on the early adoption program will finally get access to the SDK tomorrow after an announcement at Build (more waiting). Perhaps we will get a few new features then. In the end I wouldn’t say there were any huge surprises, but I am really excited about getting my hands on the devices next month and starting to develop. Stay tuned. del.icio.us Tags: Windows Phone,Windows Phone 8,Winodws Phone 8 Launch,Joe Belfiore,Jessica Alba

Read the article

What are some concise and comprehensive introductory guide to unit testing for a self-taught programmer [closed]

- by Superbest

I don't have much formal training in programming and I have learned most things by looking up solutions on the internet to practical problems I have. There are some areas which I think would be valuable to learn, but which ended up both being difficult to learn and easy to avoid learning for a self-taught programmer. Unit testing is one of them. Specifically, I am interested in tests in and for C#/.NET applications using Microsoft.VisualStudio.TestTools in Visual Studio 2010 and/or 2012, but I really want a good introduction to the principles so language and IDE shouldn't matter much. At this time I'm interested in relatively trivial tests for small or medium sized programs (development time of weeks or months and mostly just myself developing). I don't necessarily intend to do test-driven development (I am aware that some say unit testing alone is supposed to be for developing features in TDD, and not an assurance that there are no bugs in the software, but unit testing is often the only kind of testing for which I have resources). I have found this tutorial which I feel gave me a decent idea of what unit tests and TDD looks like, but in trying to apply these ideas to my own projects, I often get confused by questions I can't answer and don't know how to answer, such as: What parts of my application and what sorts of things aren't necessarily worth testing? How fine grained should my tests be? Should they test every method and property separately, or work with a larger scope? What is a good naming convention for test methods? (since apparently the name of the method is the only way I will be able to tell from a glance at the test results table what works in my program and what doesn't) Is it bad to have many asserts in one test method? Since apparently VS2012 reports only that "an Assert.IsTrue failed within method MyTestMethod", and if MyTestMethod has 10 Assert.IsTrue statements, it will be irritating to figure out why a test is failing. If a lot of the functionality deals with writing and reading data to/from the disk in a not-exactly trivial fashion, how do I test that? If I provide a bunch of files as input by placing them in the program's directory, do I have to copy those files to the test project's bin/Debug folder now? If my program works with a large body of data and execution takes minutes or more, should my tests have it do the whole use all of the real data, a subset of it, or simulated data? If latter, how do I decide on the subset or how to simulate? Closely related to the previous point, if a class is such that its main operation happens in a state that is arrived to by the program after some involved operations (say, a class makes calculations on data derived from a few thousands of lines of code analyzing some raw data) how do I test just that class without inevitably ending up testing that class and all the other code that brings it to that state along with it? In general, what kind of approach should I use for test initialization? (hopefully that is the correct term, I mean preparing classes for testing by filling them in with appropriate data) How do I deal with private members? Do I just suck it up and assume that "not public = shouldn't be tested"? I have seen people suggest using private accessors and reflection, but these feel like clumsy and unsuited for regular use. Are these even good ideas? Is there anything like design patterns concerning testing specifically? I guess the main themes in what I'd like to learn more about are, (1) what are the overarching principles that should be followed (or at least considered) in every testing effort and (2) what are popular rules of thumb for writing tests. For example, at one point I recall hearing from someone that if a method is longer than 200 lines, it should be refactored - not a universally correct rule, but it has been quite helpful since I'd otherwise happily put hundreds of lines in single methods and then wonder why my code is so hard to read. Similarly I've found ReSharpers suggestions on member naming style and other things to be quite helpful in keeping my codebases sane. I see many resources both online and in print that talk about testing in the context of large applications (years of work, 10s of people or more). However, because I've never worked on such large projects, this context is very unfamiliar to me and makes the material difficult to follow and relate to my real world problems. Speaking of software development in general, advice given with the assumptions of large projects isn't always straightforward to apply to my own, smaller endeavors. Summary So my question is: What are some resources to learn about unit testing, for a hobbyist, self-taught programmer without much formal training? Ideally, I'm looking for a short and simple "bible of unit testing" which I can commit to memory, and then apply systematically by repeatedly asking myself "is this test following the bible of testing closely enough?" and then amending discrepancies if it doesn't.

Read the article

The Dreaded Startup Repair Loop on Win 7

- by HighAltitudeCoder

For most people, upgrading to Windows 7 has been a relatively painless process. Not me. I am in the unlucky 1% or less who had a somewhat less pleasant experience. First, I cloned my entire onto a larger (and much faster) solid state hard drive, only experiencing minimal problems. Then, I bought the Retail version of Windows 7 Ultimate, took a deep breath and... oh yeah, I almost forgot - BACK UP THE COMPUTER. The next morning I upgraded to Win 7 and everything seemed fine, until... I rebooted the system, the nice Windows 7 launch graphics come up, it's about to launch and AWWW, are you kidding me?!?! Back to the BIOS splash screen? Next comes the sequence of failure - attempt repair - unable to repair - do you want to wipe your hard drive decisions. Because I purchased the retail version, a number is provided where I could call Microsoft Tech support. When I did, they instructed me to click "Install" from my installation CD, which did not work. When I tried the "Upgrade" option, it reaches an impasse, telling you that yoiu have a newer version of Win 7, and thus cannot Upgrade. If you choose "Install" you willl lose everything... files, programs, EVERYTHING. Or at least this is what it tells you. I was not willing to take the risk. To make things worse, I had installed a new antivirus software application before I realized my system was unstable (Trend Micro Titanium Internet Security), and this was causing additional problems. One interesting thing, and the only saving grace as it turns out, was that my system WOULD successfully reboot into the OS if I chose to restart it, rather than shut it down. If I chose to shut down, I would have to go through the loop again until I was given the option to restart. As it turned out, I needed to update my BIOS. I assumed that since I had updated my BIOS a long time ago to settings that were stable under Windows Vista Ultimate x64, I incorrectly expected Win 7 to adopt the same settings and didn't expect there to be any problems. WRONG. My BIOS had a setting to halt the boot cycle if various kinds of errors were detected. Windows Vista didn't care about this, but forget it under Windows 7. I turned immediately corrected that BIOS setting. Next, there were the two separate BIOS settings: enable USB mouse and enable USB keyboard. The only sequence of events that would work were to start my reboot process over from stratch with a hard-wired non-usb keyboard and mouse. Whent the system booted under these settings, it doesn't detect any errors due to either the mouse or keyboard, and actually booted for the first time in a long while (let me tell ya, that's an amazing experience after fiddling with settings for two entire weekends!) Next step: leave your old mouse and keyboard connected, but also connect your other two devices (mouse, keyboard) that use USB connections. During the boot cycle, the operating system will not fail due to missing requirements during startup, and it will then pick up the new drivers necessary to use your new hardware. If you think you are in the clear here, you are wrong. The next VERY IMPORTANT step is to remember to change your settings in the BIOS upon next startup. Specifically, yoiu will need ot change your BIOS to enable USB mouse and enable USB keyboard input. If you don't, Windows will detect an incompatibility upon the next startup, and you will be stuck once again in the endless cycle of reboot/Startup Repair/reboot/Startup Repair, without ever reaching a successful boot. Here's the thing - the BIOS and the drivers registered in Win 7 need to match. If they don't, you're going to lose another weekend worrying and fiddling, all the while wondering if you've permanently damaged your hard drive beyond repair. (Sigh). In the end, things worked out. I must note that it is saddening to see how many posts there are out there that recommend just doing a clean install, as if it's the only option. How many countless poor souls have lost their data, their backups, their pictures and videos, all for nothing other than the fact that the person giving advice just didn't know what to do at that point? My advice to you, try having a look at your BIOS settings first and making sure Win 7 can find your BIOS settings, and also disabling in your BIOS anything that might halt your system boot-up process if it encounters errors.

Read the article

StreamInsight 2.1 Released

- by Roman Schindlauer

The wait is over—we are pleased to announce the release of StreamInsight 2.1. Since the release of version 1.2, we have heard your feedbacks and suggestions and based on that we have come up with a whole new set of features. Here are some of the highlights: A New Programming Model – A more clear and consistent object model, eliminating the need for complex input and output adapters (though they are still completely supported). This new model allows you to provision, name, and manage data sources and sinks in the StreamInsight server. Tight integration with Reactive Framework (Rx) – You can write reactive queries hosted inside StreamInsight as well as compose temporal queries on reactive objects. High Availability – Check-pointing over temporal streams and multiple processes with shared computation. Here is how simple coding can be with the 2.1 Programming Model: class Program { static void Main(string[] args) { using (Server server = Server.Create("Default")) { // Create an app Application app = server.CreateApplication("app"); // Define a simple observable which generates an integer every second var source = app.DefineObservable(() => Observable.Interval(TimeSpan.FromSeconds(1))); // Define a sink. var sink = app.DefineObserver(() => Observer.Create<long>(x => Console.WriteLine(x))); // Define a query to filter the events var query = from e in source where e % 2 == 0 select e; // Bind the query to the sink and create a runnable process using (IDisposable proc = query.Bind(sink).Run("MyProcess")) { Console.WriteLine("Press a key to dispose the process..."); Console.ReadKey(); } } } } That’s how easily you can define a source, sink and compose a query and run it. Note that we did not replace the existing APIs, they co-exist with the new surface. Stay tuned, you will see a series of articles coming out over the next few weeks about the new features and how to use them. Come and grab it from our download center page and let us know what you think! You can find the updated MSDN documentation here, and we would appreciate if you could provide feedback to the docs as well—best via email to [email protected]. Moreover, we updated our samples to demonstrate the new programming surface. Regards, The StreamInsight Team

Read the article

ASP.NET: Including JavaScript libraries conditionally from CDN

- by DigiMortal

When developing cloud applications it is still useful to build them so they can run also on local machine without network connection. One thing you use from CDN when in cloud and from app folder when not connected are common JavaScript libraries. In this posting I will show you how to add support for local and CDN script stores to your ASP.NET MVC web application. Our solution is simple. We will add new configuration setting to our web.config file (including cloud transform file of it) and new property to our web application. In master page where scripts are included we will include scripts from CDN conditionally. There is nothing complex, all changes we make are simple ones. 1. Adding new property to web application Although I am using ASP.NET MVC web application these modifications work also very well with ASP.NET Forms. Open Global.asax and add new static property to your application class. public static bool UseCdn { get { var valueString = ConfigurationManager.AppSettings["useCdn"]; bool useCdn; bool.TryParse(valueString, out useCdn); return useCdn; } } If you want less round-trips to configuration data you can keep some nullable boolean in your application class scope and load CDN setting first time it is asked. 2. Adding new configuration setting to web.config By default my application uses local scripts. Although my application runs on cloud I can do a lot of stuff without staging environment in cloud. So by default I don’t have costs on traffic when including scripts from application folders. <appSettings> <add key="UseCdn" value="false" /> </appSettings> You can also set UseCdn value to true and change it to false when you are not connected to network. 3. Modifying web.config cloud transform I have special configuration for my solution that I use when deploying my web application to cloud. This configuration is called Cloud and transform for this configuration is located in web.cloud.config. To make application using CDN when deployed to cloud we need the following transform. <appSettings> <add key="UseCdn" value="true" xdt:Transform="SetAttributes" xdt:Locator="Match(key)" /> </appSettings> Now when you publish your application to cloud it uses CDN by default. 4. Including scripts in master pages The last thing we need to change is our master page. My solution is simple. I check if I have to include scripts from CDN and if it is true then I include scripts from there. Otherwise my scripts will be included from application folder. @if (MyWeb.MvcApplication.UseCdn) { <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.4.min.js" type="text/javascript"></script> } else { <script src="@Url.Content("~/Scripts/jquery-1.4.4.min.js")" type="text/javascript"></script> } Although here is only one script shown you can add all your scripts that are also available in some CDN in this if-else block. You are free to include scripts from different CDN services if you need. Conclusion As we saw it was very easy to modify our application to make it use CDN for JavaScript libraries in cloud and local scripts when run on local machine. We made only small changes to our application code, configuration and master pages to get different script sources supported. Our application is now more independent from external sources when we are working on it.

Read the article

StreamInsight 2.1 Released

- by Roman Schindlauer

The wait is over—we are pleased to announce the release of StreamInsight 2.1. Since the release of version 1.2, we have heard your feedbacks and suggestions and based on that we have come up with a whole new set of features. Here are some of the highlights: A New Programming Model – A more clear and consistent object model, eliminating the need for complex input and output adapters (though they are still completely supported). This new model allows you to provision, name, and manage data sources and sinks in the StreamInsight server. Tight integration with Reactive Framework (Rx) – You can write reactive queries hosted inside StreamInsight as well as compose temporal queries on reactive objects. High Availability – Check-pointing over temporal streams and multiple processes with shared computation. Here is how simple coding can be with the 2.1 Programming Model: class Program { static void Main(string[] args) { using (Server server = Server.Create("Default")) { // Create an app Application app = server.CreateApplication("app"); // Define a simple observable which generates an integer every second var source = app.DefineObservable(() => Observable.Interval(TimeSpan.FromSeconds(1))); // Define a sink. var sink = app.DefineObserver(() => Observer.Create<long>(x => Console.WriteLine(x))); // Define a query to filter the events var query = from e in source where e % 2 == 0 select e; // Bind the query to the sink and create a runnable process using (IDisposable proc = query.Bind(sink).Run("MyProcess")) { Console.WriteLine("Press a key to dispose the process..."); Console.ReadKey(); } } } } That’s how easily you can define a source, sink and compose a query and run it. Note that we did not replace the existing APIs, they co-exist with the new surface. Stay tuned, you will see a series of articles coming out over the next few weeks about the new features and how to use them. Come and grab it from our download center page and let us know what you think! You can find the updated MSDN documentation here, and we would appreciate if you could provide feedback to the docs as well—best via email to [email protected]. Moreover, we updated our samples to demonstrate the new programming surface. Regards, The StreamInsight Team

Read the article

Part 4 of 4 : Tips/Tricks for Silverlight Developers.

- by mbcrump

Part 1 | Part 2 | Part 3 | Part 4 I wanted to create a series of blog post that gets right to the point and is aimed specifically at Silverlight Developers. The most important things I want this series to answer is : What is it? Why do I care? How do I do it? I hope that you enjoy this series. Let’s get started: Tip/Trick #16) What is it? Find out version information about Silverlight and which WebKit it is using by going to http://issilverlightinstalled.com/scriptverify/. Why do I care? I’ve had those users that its just easier to give them a site and say copy/paste the line that says User Agent in order to troubleshoot a Silverlight problem. I’ve also been debugging my own Silverlight applications and needed an easy way to determine if the plugin is disabled or not. How do I do it: Simply navigate to http://issilverlightinstalled.com/scriptverify/ and hit the Verify button. An example screenshot is located below: Results from Chrome 7 Results from Internet Explorer 8 (With Silverlight Disabled) Tip/Trick #17) What is it? Use Lambdas whenever you can. Why do I care? It is my personal opinion that code is easier to read using Lambdas after you get past the syntax. How do I do it: For example: You may write code like the following: void MainPage_Loaded(object sender, RoutedEventArgs e) { //Check and see if we have a newer .XAP file on the server Application.Current.CheckAndDownloadUpdateAsync(); Application.Current.CheckAndDownloadUpdateCompleted += new CheckAndDownloadUpdateCompletedEventHandler(Current_CheckAndDownloadUpdateCompleted); } void Current_CheckAndDownloadUpdateCompleted(object sender, CheckAndDownloadUpdateCompletedEventArgs e) { if (e.UpdateAvailable) { MessageBox.Show( "An update has been installed. To see the updates please exit and restart the application"); } } To me this style forces me to look for the other Method to see what the code is actually doing. The style located below is much easier to read in my opinion and does the exact same thing. void MainPage_Loaded(object sender, RoutedEventArgs e) { //Check and see if we have a newer .XAP file on the server Application.Current.CheckAndDownloadUpdateAsync(); Application.Current.CheckAndDownloadUpdateCompleted += (s, e) => { if (e.UpdateAvailable) { MessageBox.Show( "An update has been installed. To see the updates please exit and restart the application"); } }; } Tip/Trick #18) What is it? Prevent development Web Service references from breaking when Visual Studio auto generates a new port number. Why do I care? We have all been there, we are developing a Silverlight Application and all of a sudden our development web services break. We check and find out that the local port number that Visual Studio assigned has changed and now we need up to update all of our service references. We need a way to stop this. How do I do it: This can actually be prevented with just a few mouse click. Right click on your web solution and goto properties. Click the tab that says, Web. You just need to click the radio button and specify a port number. Now you won’t be bothered with that anymore. Tip/Trick #19) What is it? You can disable the Close Button a ChildWindow. Why do I care? I wouldn’t blog about it if I hadn’t seen it. Devs trying to override keystrokes to prevent users from closing a Child Window. How do I do it: A property exist on the ChildWindow called “HasCloseButton”, you simply change that to false and your close button is gone. You can delete the “Cancel” button and add some logic to the OK button if you want the user to respond before proceeding. Tip/Trick #20) What is it? Cleanup your XAML. Why do I care? By removing unneeded namespaces, not naming all of your controls and getting rid of designer markup you can improve code quality and readability. How do I do it: (This is a 3 in one tip) Remove unused Designer markup: 1) Have you ever wondered what the following code snippet does? xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignWidth="640" d:DesignHeight="480" This code is telling the designer to do something special with this page in “Design mode” Specifically the width and the height of the page. When its running in the browser it will not use this information and it is actually ignored by the XAML parser. In other words, if you don’t need it then delete it. 2) If you are not using a namespace then remove it. In the code sample below, I am using Resharper which will tell me the ones that I’m not using by the grayed out line below. If you don’t have resharper you can look in your XAML and manually remove the unneeded namespaces. 3) Don’t name an control unless you actually need to refer to it in procedural code. If you name a control you will take a slight performance hit that is totally unnecessary if its not being called. <TextBlock Height="23" Text="TextBlock" /> That is the end of the series. I hope that you enjoyed it and please check out Part 1 | Part 2 | Part 3 if your hungry for more. Subscribe to my feed CodeProject

Read the article

?My Oracle Support???????????????

- by user763198

Normal 0 7.8 ? 0 2 false false false EN-US ZH-CN X-NONE Normal 0 7.8 ? 0 2 false false false EN-US ZH-CN X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:????; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:105%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:major-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:major-latin; mso-fareast-language:EN-US; mso-bidi-language:EN-US;} l ????????? ??????Help ??????? Table of Contents? ????Certification? ??,????????: My Oracle Support Help - Certifications (Doc ID 870956.5) l ????????? ?????????????????????????,???My Oracle Support Help - Certifications (Doc ID 870956.5)????????????????????,??? Global Customer Support ????? l ??????????? ????????????: http://www.oracle.com/support/contact.html l ???????????? ????????????: https://shop.oracle.com/pls/ostore/f?p=dstore:home:0:::::&tz=8:00 ????????????????,???? “Contact Us” ??? l ???????,??? Export ??? ???????: 1. ???????,????,????Copy Selected Row,??Actions?????Copy Selected Rows? 2. ??????spreadsheet,??????? email ???? ?????????????table ??,????table ??,????Printable View????????????????,?????????????? ????tables????Export??, ??????export???????CSV???? ??:???Printable View ?Export?????????,??????????????? l ?????????? ?Oracle Education ??????????: http://education.oracle.com ????????????? ???????????,???Oracle Education ??(????????????)? l ????? License codes/Keys? http://www.oracle.com/us/support/licensecodes/index.html ?????????License Codes ?????????????(?????),????????????????????Oracle license code ?????????,????Customer Support Identifier (CSI)? l ???Software Delivery Cloud ????????? ???Software Delivery Cloud ???????? (Doc ID 1070969.1) ??? http://edelivery.oracle.com/ ,Oracle Software Delivery Cloud. ??“Sign In/Register” button. ??Terms & Restrictions ????Continue ????????,????Go ????????Continue ????????? l ??????Oracle.com ???? 1, ? www.oracle.com 2, ???????“Help” 3, ?????,???“Oracle.com login FAQ” 4, ???????????? 5, Oracle.com ???????????? l ????CRM Ondemand ????? ?CRMOD ??,????????: (i) CRMOD ??????: http://www.oracle.com/us/products/applications/crmondemand/support/customer-care-support-337680.html (ii) CRMOD ?????????,?????????????????: https://ebusiness.siebel.com/odcustomercare/contact/contact_cc.asp l ???? Oracle Software Delivery Cloud ??? ????Oracle Software Delivery Cloud – ??Oracle ??????,???/????????email ???????? ???????: 1. ? www.oracle.com ?????Single Sign-On (SSO) ?? 2. ?????"Account" 3. ????,?? "Please verify account(?????)" ,????????????email ID 4. ????????,???????? l ???My Oracle Support??????Oracle Database Patchset ? 1. ?????? 2. ??Product ?Product Family: Oracle database. 3. ????:? Oracle 10.2.0.4. 4. ????:?Microsoft x64 (64-bit). 5. ??????: Patchset/Minipack. 6. ?? Go. l ?????????????FTP ??? ???? CD/DVD ? FTP ??: ???My Oracle Support ( https://support.oracle.com ) ???????Contact Us?? ???????????? CD/DVD ? FTP ???????????? ????????,????????,?????????????,????????????

Read the article

WPF TreeView MouseDown

- by imekon

I've got something like this in a TreeView: <DataTemplate x:Key="myTemplate"> <StackPanel MouseDown="OnItemMouseDown"> ... </StackPanel> </DataTemplate> Using this I get the mouse down events if I click on items in the stack panel. However... there seems to be another item behind the stack panel that is the TreeViewItem - it's very hard to hit, but not impossible, and that's when the problems start to occur. I had a go at handling PreviewMouseDown on TreeViewItem, however that seems to require e.Handled = false otherwise standard tree view behaviour stops working. Ok, Here's the source code... MainWindow.xaml <Window x:Class="WPFMultiSelectTree.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:WPFMultiSelectTree" Title="Multiple Selection Tree" Height="300" Width="300"> <Window.Resources>  <local:VisibilityConverter x:Key="visibilityConverter"/> <local:VisibilityInverter x:Key="visibilityInverter"/>  <Style TargetType="TreeViewItem"> <Style.Triggers> <DataTrigger Binding="{Binding Selected}" Value="True"> <Setter Property="Background" Value="DarkBlue"/> <Setter Property="Foreground" Value="White"/> </DataTrigger> </Style.Triggers> <EventSetter Event="PreviewMouseDown" Handler="OnTreePreviewMouseDown"/> </Style>  <HierarchicalDataTemplate x:Key="RecursiveTemplate" ItemsSource="{Binding Children}"> <StackPanel Margin="2" Orientation="Horizontal" MouseDown="OnTreeMouseDown"> <Ellipse Width="12" Height="12" Fill="Green"/> <TextBlock Margin="2" Text="{Binding Name}" Visibility="{Binding Editing, Converter={StaticResource visibilityInverter}}"/> <TextBox Margin="2" Text="{Binding Name}" KeyDown="OnTextBoxKeyDown" IsVisibleChanged="OnTextBoxIsVisibleChanged" Visibility="{Binding Editing, Converter={StaticResource visibilityConverter}}"/> <TextBlock Margin="2" Text="{Binding Index, StringFormat=({0})}"/> </StackPanel> </HierarchicalDataTemplate>  <DataTemplate x:Key="ListTemplate"> <TextBlock Text="{Binding Name}"/> </DataTemplate> </Window.Resources> <Grid>  <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition/> <RowDefinition Height="Auto"/> <RowDefinition/> </Grid.RowDefinitions>  <TextBlock Grid.Row="0" Margin="5" Background="PowderBlue">Multiple selection tree view</TextBlock>  <TreeView Name="m_tree" Margin="2" Grid.Row="1" ItemsSource="{Binding Children}" ItemTemplate="{StaticResource RecursiveTemplate}"/>  <TextBlock Grid.Row="2" Margin="5" Background="PowderBlue">The currently selected items in the tree</TextBlock>  <ListBox Name="m_list" Margin="2" Grid.Row="3" ItemsSource="{Binding .}" ItemTemplate="{StaticResource ListTemplate}"/> </Grid> </Window> MainWindow.xaml.cs /// <summary> /// Interaction logic for MainWindow.xaml /// </summary> public partial class MainWindow : Window { private Container m_root; private Container m_first; private ObservableCollection<Container> m_selection; private string m_current; /// <summary> /// Constructor /// </summary> public MainWindow() { InitializeComponent(); m_selection = new ObservableCollection<Container>(); m_root = new Container("root"); for (int parents = 0; parents < 50; parents++) { Container parent = new Container(String.Format("parent{0}", parents + 1)); for (int children = 0; children < 1000; children++) { parent.Add(new Container(String.Format("child{0}", children + 1))); } m_root.Add(parent); } m_tree.DataContext = m_root; m_list.DataContext = m_selection; m_first = null; } /// <summary> /// Has the shift key been pressed? /// </summary> private bool ShiftPressed { get { return Keyboard.IsKeyDown(Key.LeftShift) || Keyboard.IsKeyDown(Key.RightShift); } } /// <summary> /// Has the control key been pressed? /// </summary> private bool CtrlPressed { get { return Keyboard.IsKeyDown(Key.LeftCtrl) || Keyboard.IsKeyDown(Key.RightCtrl); } } /// <summary> /// Clear down the selection list /// </summary> private void DeselectAndClear() { foreach(Container container in m_selection) { container.Selected = false; } m_selection.Clear(); } /// <summary> /// Add the container to the list (if not already present), /// mark as selected /// </summary> /// <param name="container"></param> private void AddToSelection(Container container) { if (container == null) { return; } foreach (Container child in m_selection) { if (child == container) { return; } } container.Selected = true; m_selection.Add(container); } /// <summary> /// Remove container from list, mark as not selected /// </summary> /// <param name="container"></param> private void RemoveFromSelection(Container container) { m_selection.Remove(container); container.Selected = false; } /// <summary> /// Process single click on a tree item /// /// Normally just select an item /// /// SHIFT-Click extends selection /// CTRL-Click toggles a selection /// </summary> /// <param name="sender"></param> private void OnTreeSingleClick(object sender) { FrameworkElement element = sender as FrameworkElement; if (element != null) { Container container = element.DataContext as Container; if (container != null) { if (CtrlPressed) { if (container.Selected) { RemoveFromSelection(container); } else { AddToSelection(container); } } else if (ShiftPressed) { if (container.Parent == m_first.Parent) { if (container.Index < m_first.Index) { Container item = container; for (int i = container.Index; i < m_first.Index; i++) { AddToSelection(item); item = item.Next; if (item == null) { break; } } } else if (container.Index > m_first.Index) { Container item = m_first; for (int i = m_first.Index; i <= container.Index; i++) { AddToSelection(item); item = item.Next; if (item == null) { break; } } } } } else { DeselectAndClear(); m_first = container; AddToSelection(container); } } } } /// <summary> /// Process double click on tree item /// </summary> /// <param name="sender"></param> private void OnTreeDoubleClick(object sender) { FrameworkElement element = sender as FrameworkElement; if (element != null) { Container container = element.DataContext as Container; if (container != null) { container.Editing = true; m_current = container.Name; } } } /// <summary> /// Clicked on the stack panel in the tree view /// /// Double left click: /// /// Switch to editing mode (flips visibility of textblock and textbox) /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void OnTreeMouseDown(object sender, MouseButtonEventArgs e) { Debug.WriteLine("StackPanel mouse down"); switch(e.ChangedButton) { case MouseButton.Left: switch (e.ClickCount) { case 2: OnTreeDoubleClick(sender); e.Handled = true; break; } break; } } /// <summary> /// Clicked on tree view item in tree /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void OnTreePreviewMouseDown(object sender, MouseButtonEventArgs e) { Debug.WriteLine("TreeViewItem preview mouse down"); switch (e.ChangedButton) { case MouseButton.Left: switch (e.ClickCount) { case 1: { // We've had a single click on a tree view item // Unfortunately this is the WHOLE tree item, including the +/- // symbol to the left. The tree doesn't do a selection, so we // have to filter this out... MouseDevice device = e.Device as MouseDevice; Debug.WriteLine(String.Format("Tree item clicked on: {0}", device.DirectlyOver.GetType().ToString())); // This is bad. The whole point of WPF is for the code // not to know what the UI has - yet here we are testing for // it as a workaround. Sigh... if (device.DirectlyOver.GetType() != typeof(Path)) { OnTreeSingleClick(sender); } // Cannot say handled - if we do it stops the tree working! //e.Handled = true; } break; } break; } } /// <summary> /// Key press in text box /// /// Return key finishes editing /// Escape key finishes editing, restores original value (this doesn't work!) /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void OnTextBoxKeyDown(object sender, KeyEventArgs e) { switch(e.Key) { case Key.Return: { TextBox box = sender as TextBox; if (box != null) { Container container = box.DataContext as Container; if (container != null) { container.Editing = false; e.Handled = true; } } } break; case Key.Escape: { TextBox box = sender as TextBox; if (box != null) { Container container = box.DataContext as Container; if (container != null) { container.Editing = false; container.Name = m_current; e.Handled = true; } } } break; } } /// <summary> /// When text box becomes visible, grab focus and select all text in it. /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void OnTextBoxIsVisibleChanged(object sender, DependencyPropertyChangedEventArgs e) { bool visible = (bool)e.NewValue; if (visible) { TextBox box = sender as TextBox; if (box != null) { box.Focus(); box.SelectAll(); } } } } Here's the Container class public class Container : INotifyPropertyChanged { private string m_name; private ObservableCollection<Container> m_children; private Container m_parent; private bool m_selected; private bool m_editing; /// <summary> /// Constructor /// </summary> /// <param name="name">name of object</param> public Container(string name) { m_name = name; m_children = new ObservableCollection<Container>(); m_parent = null; m_selected = false; m_editing = false; } /// <summary> /// Name of object /// </summary> public string Name { get { return m_name; } set { if (m_name != value) { m_name = value; OnPropertyChanged("Name"); } } } /// <summary> /// Index of object in parent's children /// /// If there's no parent, the index is -1 /// </summary> public int Index { get { if (m_parent != null) { return m_parent.Children.IndexOf(this); } return -1; } } /// <summary> /// Get the next item, assuming this is parented /// /// Returns null if end of list reached, or no parent /// </summary> public Container Next { get { if (m_parent != null) { int index = Index + 1; if (index < m_parent.Children.Count) { return m_parent.Children[index]; } } return null; } } /// <summary> /// List of children /// </summary> public ObservableCollection<Container> Children { get { return m_children; } } /// <summary> /// Selected status /// </summary> public bool Selected { get { return m_selected; } set { if (m_selected != value) { m_selected = value; OnPropertyChanged("Selected"); } } } /// <summary> /// Editing status /// </summary> public bool Editing { get { return m_editing; } set { if (m_editing != value) { m_editing = value; OnPropertyChanged("Editing"); } } } /// <summary> /// Parent of this object /// </summary> public Container Parent { get { return m_parent; } set { m_parent = value; } } /// <summary> /// WPF Property Changed event /// </summary> public event PropertyChangedEventHandler PropertyChanged; /// <summary> /// Handler to inform WPF that a property has changed /// </summary> /// <param name="name"></param> private void OnPropertyChanged(string name) { if (PropertyChanged != null) { PropertyChanged(this, new PropertyChangedEventArgs(name)); } } /// <summary> /// Add a child to this container /// </summary> /// <param name="child"></param> public void Add(Container child) { m_children.Add(child); child.m_parent = this; } /// <summary> /// Remove a child from this container /// </summary> /// <param name="child"></param> public void Remove(Container child) { m_children.Remove(child); child.m_parent = null; } } The two classes VisibilityConverter and VisibilityInverter are implementations of IValueConverter that translates bool to Visibility. They make sure the TextBlock is displayed when not editing, and the TextBox is displayed when editing.

Read the article

WCF AuthenticationService in IIS7 Error

- by germandb

I have a WCF Server running on IIS 7 using default application pool, with SSL activate, the services is installed in a SBS Server 2008. I implement client application services with wcf and SQL 2005 for setting the access control in my application. The application run under windows vista and is make with WPF. In my developer machine the application and the WCF services run well, the IIS i'm use for the trials is the local IIS 7 and the database is the SQL Server 2005 database hosting in my server. I'm using Visual Studio Project Designer to enable and configure client application services. using https://localhost/WcfServidorFundacion. When i'm change the authentication services location to https://WcfServices:5659/WcfServidorFundacion and recompile the application, the following error show up. Message: The web service returned the error status code: InternalServerError. Details of service failure: {"Message":" Error while processing your request ","StackTrace":"","ExceptionType":""} Stack Trace: en System.Net.HttpWebRequest.GetResponse() en System.Web.ClientServices.Providers.ProxyHelper.CreateWebRequestAndGetResponse(String serverUri, CookieContainer& cookies, String username, String connectionString, String connectionStringProvider, String[] paramNames, Object[] paramValues, Type returnType) InnerException: System.Net.WebException Message="Remote Server Error: (500) Interal Server Error." I can access the WCF service from the navigator using the url mentioned above and even make a webReference in my project. I make a capture of the response but I'cant post it because i don't have 10 reputation points I activate the error log in the IIS 7 server, and the result is a Warning in the ManagedPipilineHandler. I appreciate if any one can help me Errors & Warnings No.? Severity Event Module Name 132. view trace Warning -MODULE_SET_RESPONSE_ERROR_STATUS ModuleName ManagedPipelineHandler Notification 128 HttpStatus 500 HttpReason Internal Server Error HttpSubStatus 0 ErrorCode 0 ConfigExceptionInfo Notification EXECUTE_REQUEST_HANDLER ErrorCode La operación se ha completado correctamente. (0x0) Maybe this can help, is the web.config of my service <?xml version="1.0" encoding="utf-8"?>  <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" /> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings /> <connectionStrings> <remove name="LocalMySqlServer" /> <remove name="LocalSqlServer" /> <add name="fundacionSelfAut" connectionString="Data Source=FUNDACIONSERVER/PRUEBAS;Initial Catalog=fundacion;User ID=wcfBaseDatos;Password=qwerty_2009;" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <profile enabled="true" defaultProvider="SqlProfileProvider"> <providers> <clear /> <add name="SqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="fundacionSelfAut" applicationName="fundafe" /> </providers> <properties> <add name="FirstName" type="String" /> <add name="LastName" type="String" /> <add name="PhoneNumber" type="String" /> </properties> </profile> <roleManager enabled="true" defaultProvider="SqlRoleProvider"> <providers> <clear /> <add name="SqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="fundacionSelfAut" applicationName="fundafe" /> </providers> </roleManager> <membership defaultProvider="SqlMembershipProvider"> <providers> <clear /> <add name="SqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="fundacionSelfAut" applicationName="fundafe" enablePasswordRetrieval="false" enablePasswordReset="false" requiresQuestionAndAnswer="true" requiresUniqueEmail="true" passwordFormat="Hashed" /> </providers> </membership> <authentication mode="Forms" /> <compilation debug="true" strict="false" explicit="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </assemblies> </compilation>   <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx" /> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false" /> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </httpModules> <sessionState timeout="40" /> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5" /> <providerOption name="WarnAsError" value="false" /> </compiler> </compilers> </system.codedom>  <system.webServer> <validation validateIntegratedModeConfiguration="false" /> <modules> <add name="ScriptModule" preCondition="integratedMode" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated" /> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </handlers> <tracing> <traceFailedRequests> <add path="*"> <traceAreas> <add provider="ASP" verbosity="Verbose" /> <add provider="ASPNET" areas="Infrastructure,Module,Page,AppServices" verbosity="Verbose" /> <add provider="ISAPI Extension" verbosity="Verbose" /> <add provider="WWW Server" areas="Authentication,Security,Filter,StaticFile,CGI,Compression,Cache,RequestNotifications,Module" verbosity="Verbose" /> </traceAreas> <failureDefinitions statusCodes="401.3,500,403,404,405" /> </add> </traceFailedRequests> </tracing> <security> <authorization> <add accessType="Allow" users="germanbarbosa,informatica" /> </authorization> <authentication> <windowsAuthentication enabled="false" /> </authentication> </security> </system.webServer> <system.web.extensions> <scripting> <webServices> <authenticationService enabled="true" requireSSL="true" /> <profileService enabled="true" readAccessProperties="FirstName,LastName,PhoneNumber" /> <roleService enabled="true" /> </webServices> </scripting> </system.web.extensions> <system.serviceModel> <services>  <service behaviorConfiguration="AppServiceBehaviors" name="System.Web.ApplicationServices.AuthenticationService"> <endpoint address="" binding="basicHttpBinding" bindingConfiguration="userHttps" bindingNamespace="http://asp.net/ApplicationServices/v200" contract="System.Web.ApplicationServices.AuthenticationService" /> </service>  <service behaviorConfiguration="AppServiceBehaviors" name="System.Web.ApplicationServices.RoleService"> <endpoint binding="basicHttpBinding" bindingConfiguration="userHttps" bindingNamespace="http://asp.net/ApplicationServices/v200" contract="System.Web.ApplicationServices.RoleService" /> </service>  <service behaviorConfiguration="AppServiceBehaviors" name="System.Web.ApplicationServices.ProfileService"> <endpoint binding="basicHttpBinding" bindingNamespace="http://asp.net/ApplicationServices/v200" bindingConfiguration="userHttps" contract="System.Web.ApplicationServices.ProfileService" /> </service> </services> <bindings> <basicHttpBinding>  <binding name="userHttps"> <security mode="Transport"> </security> </binding> </basicHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="AppServiceBehaviors"> <serviceMetadata httpGetEnabled="false" httpsGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" /> <serviceAuthorization principalPermissionMode="UseAspNetRoles" roleProviderName="SqlRoleProvider" /> <serviceCredentials> <userNameAuthentication userNamePasswordValidationMode="MembershipProvider" membershipProviderName="SqlMembershipProvider" /> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> </system.serviceModel> </configuration>

Read the article

A problem with the asp.net create user control

- by Sir Psycho

Hi, I've customised the asp.net login control and it seems to create new accounts fine, but if I duplicate the user id thats already registered or enter an email thats already used, the error messages arn't displaying. Its driving me crazy. The page just refreshes without showing an error. I've included the as instructed on the MSDN site but nothing. http://msdn.microsoft.com/en-us/library/ms178342.aspx <asp:CreateUserWizard ErrorMessageStyle-BorderColor="Azure" ID="CreateUserWizard1" runat="server" ContinueDestinationPageUrl="~/home.aspx"> <WizardSteps> <asp:CreateUserWizardStep ID="CreateUserWizardStep1" runat="server"> <ContentTemplate> <asp:Literal ID="ErrorMessage" runat="server"></asp:Literal> <div class="fieldLine"> <asp:Label ID="lblFirstName" runat="server" Text="First Name:" AssociatedControlID="tbxFirstName"></asp:Label> <asp:Label ID="lblLastName" runat="server" Text="Last Name:" AssociatedControlID="tbxLastName"></asp:Label> </div> <div class="fieldLine"> <asp:TextBox ID="tbxFirstName" runat="server"></asp:TextBox> <asp:TextBox ID="tbxLastName" runat="server"></asp:TextBox> </div> <asp:Label ID="lblEmail" runat="server" Text="Email:" AssociatedControlID="Email"></asp:Label> <asp:TextBox ID="Email" runat="server" CssClass="wideInput"></asp:TextBox><br /> <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" CssClass="aspValidator" Display="Dynamic" ControlToValidate="Email" ErrorMessage="Required"></asp:RequiredFieldValidator> <asp:RegularExpressionValidator ID="RegularExpressionValidator1" runat="server" Display="Dynamic" CssClass="aspValidator" ControlToValidate="Email" SetFocusOnError="true" ValidationExpression="^(?:[a-zA-Z0-9_'^&/+-])+(?:\.(?:[a-zA-Z0-9_'^&/+-])+)*@(?:(?:\[?(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?))\.){3}(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\]?)|(?:[a-zA-Z0-9-]+\.)+(?:[a-zA-Z]){2,}\.?)$" ErrorMessage="Email address not valid"></asp:RegularExpressionValidator> <asp:Label ID="lblEmailConfirm" runat="server" Text="Confirm Email Address:" AssociatedControlID="tbxEmailConfirm"></asp:Label> <asp:TextBox ID="tbxEmailConfirm" runat="server" CssClass="wideInput"></asp:TextBox><br /> <asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server" CssClass="aspValidator" Display="Dynamic" ControlToValidate="tbxEmailConfirm" ErrorMessage="Required"></asp:RequiredFieldValidator> <asp:RegularExpressionValidator ID="RegularExpressionValidator2" runat="server" Display="Dynamic" CssClass="aspValidator" ControlToValidate="tbxEmailConfirm" SetFocusOnError="true" ValidationExpression="^(?:[a-zA-Z0-9_'^&/+-])+(?:\.(?:[a-zA-Z0-9_'^&/+-])+)*@(?:(?:\[?(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?))\.){3}(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\]?)|(?:[a-zA-Z0-9-]+\.)+(?:[a-zA-Z]){2,}\.?)$" ErrorMessage="Email address not valid"></asp:RegularExpressionValidator> <asp:CompareValidator ID="CompareValidator1" runat="server" Display="Dynamic" SetFocusOnError="true" CssClass="aspValidator" ControlToCompare="Email" ControlToValidate="tbxEmailConfirm" ErrorMessage="Email address' do not match"></asp:CompareValidator> <asp:Label ID="lblUsername" runat="server" Text="Username:" AssociatedControlID="UserName"></asp:Label> <asp:TextBox ID="UserName" runat="server" MaxLength="12"></asp:TextBox><br /> <asp:CustomValidator ID="CustomValidatorUserName" runat="server" Display="Dynamic" SetFocusOnError="true" CssClass="aspValidator" ValidateEmptyText="true" ControlToValidate="UserName" ErrorMessage="Username can be between 6 and 12 characters." ClientValidationFunction="ValidateLength" OnServerValidate="ValidateUserName"></asp:CustomValidator> <div class="fieldLine"> <asp:Label ID="lblPassword" runat="server" Text="Password:" AssociatedControlID="Password"></asp:Label> <asp:Label ID="lblPasswordConfirm" runat="server" Text="Confirm Password:" AssociatedControlID="ConfirmPassword" CssClass="confirmPassword"></asp:Label> </div> <div class="fieldLine"> <asp:TextBox ID="Password" runat="server" TextMode="Password"></asp:TextBox> <asp:TextBox ID="ConfirmPassword" runat="server" TextMode="Password"></asp:TextBox><br /> <asp:CustomValidator ID="CustomValidatorPassword" runat="server" Display="Dynamic" SetFocusOnError="true" CssClass="aspValidator" ControlToValidate="Password" ValidateEmptyText="true" ErrorMessage="Password can be between 6 and 12 characters" ClientValidationFunction="ValidateLength" OnServerValidate="ValidatePassword"></asp:CustomValidator> <asp:CustomValidator ID="CustomValidatorConfirmPassword" runat="server" Display="Dynamic" SetFocusOnError="true" CssClass="aspValidator" ControlToValidate="ConfirmPassword" ValidateEmptyText="true" ErrorMessage="Password can be between 6 and 12 characters" ClientValidationFunction="ValidateLength" OnServerValidate="ValidatePassword"></asp:CustomValidator> <asp:CompareValidator ID="CompareValidator2" runat="server" Enabled="false" Display="Dynamic" SetFocusOnError="true" CssClass="aspValidator" ControlToCompare="Password" ControlToValidate="ConfirmPassword" ErrorMessage="Passwords do not match"></asp:CompareValidator> </div> <asp:Label ID="lblCaptch" runat="server" Text="Captcha:" AssociatedControlID="imgCaptcha"></asp:Label> <div class="borderBlue" style="width:200px;"> <asp:Image ID="imgCaptcha" runat="server" ImageUrl="~/JpegImage.aspx" /><br /> </div> <asp:TextBox ID="tbxCaptcha" runat="server" CssClass="captchaText"></asp:TextBox> <asp:RequiredFieldValidator ControlToValidate="tbxCaptcha" CssClass="aspValidator" ID="RequiredFieldValidator3" runat="server" ErrorMessage="Required"></asp:RequiredFieldValidator> <asp:CustomValidator ID="CustomValidator1" ControlToValidate="tbxCaptcha" runat="server" OnServerValidate="ValidateCaptcha" ErrorMessage="Captcha incorrect"></asp:CustomValidator> </ContentTemplate> <CustomNavigationTemplate> <div style="float:left;"> <asp:Button ID="CreateUser" runat="server" Text="Register Now!" CausesValidation="true" CommandName="CreateUser" OnCommand="CreateUserClick" CssClass="registerButton" /> </div> </CustomNavigationTemplate> </asp:CreateUserWizardStep> <asp:CompleteWizardStep ID="CompleteWizardStep1" runat="server"> <ContentTemplate> <table border="0" style="font-size: 100%; font-family: Verdana" id="TABLE1" > <tr> <td align="center" colspan="2" style="font-weight: bold; color: white; background-color: #5d7b9d; height: 18px;"> Complete</td> </tr> <tr> <td> Your account has been successfully created.<br /> </td> </tr> <tr> <td align="right" colspan="2"> <asp:Button ID="Button1" PostBackUrl="~/home.aspx" runat="server" Text="Button" /> </td> </tr> </table> </ContentTemplate> </asp:CompleteWizardStep> </WizardSteps> </asp:CreateUserWizard>

Read the article

c# Truncate HTML safely for article summary

- by WickedW

Hi All, Does anyone have a c# variation of this? This is so I can take some html and display it without breaking as a summary lead in to an article? http://stackoverflow.com/questions/1193500/php-truncate-html-ignoring-tags Save me from reinventing the wheel! Thank you very much ---------- edit ------------------ Sorry, new here, and your right, should have phrased the question better, heres a bit more info I wish to take a html string and truncate it to a set number of words (or even char length) so I can then show the start of it as a summary (which then leads to the main article). I wish to preserve the html so I can show the links etc in preview. The main issue I have to solve is the fact that we may well end up with unclosed html tags if we truncate in the middle of 1 or more tags! The idea I have for solution is to a) truncate the html to N words (words better but chars ok) first (be sure not to stop in the middle of a tag and truncate a require attribute) b) work through the opened html tags in this truncated string (maybe stick them on stack as I go?) c) then work through the closing tags and ensure they match the ones on stack as I pop them off? d) if any open tags left on stack after this, then write them to end of truncated string and html should be good to go!!!! -- edit 12112009 Here is what I have bumbled together so far as a unittest file in VS2008, this 'may' help someone in future My hack attempts based on Jan code are at top for char version + word version (DISCLAIMER: this is dirty rough code!! on my part) I assume working with 'well-formed' HTML in all cases (but not necessarily a full document with a root node as per XML version) Abels XML version is at bottom, but not yet got round to fully getting tests to run on this yet (plus need to understand the code) ... I will update when I get chance to refine having trouble with posting code? is there no upload facility on stack? Thanks for all comments :) using System; using System.Collections.Generic; using System.Text.RegularExpressions; using System.Xml; using System.Xml.XPath; using Microsoft.VisualStudio.TestTools.UnitTesting; namespace PINET40TestProject { [TestClass] public class UtilityUnitTest { public static string TruncateHTMLSafeishChar(string text, int charCount) { bool inTag = false; int cntr = 0; int cntrContent = 0; // loop through html, counting only viewable content foreach (Char c in text) { if (cntrContent == charCount) break; cntr++; if (c == '<') { inTag = true; continue; } if (c == '>') { inTag = false; continue; } if (!inTag) cntrContent++; } string substr = text.Substring(0, cntr); //search for nonclosed tags MatchCollection openedTags = new Regex("<[^/](.|\n)*?>").Matches(substr); MatchCollection closedTags = new Regex("<[/](.|\n)*?>").Matches(substr); // create stack Stack<string> opentagsStack = new Stack<string>(); Stack<string> closedtagsStack = new Stack<string>(); // to be honest, this seemed like a good idea then I got lost along the way // so logic is probably hanging by a thread!! foreach (Match tag in openedTags) { string openedtag = tag.Value.Substring(1, tag.Value.Length - 2); // strip any attributes, sure we can use regex for this! if (openedtag.IndexOf(" ") >= 0) { openedtag = openedtag.Substring(0, openedtag.IndexOf(" ")); } // ignore brs as self-closed if (openedtag.Trim() != "br") { opentagsStack.Push(openedtag); } } foreach (Match tag in closedTags) { string closedtag = tag.Value.Substring(2, tag.Value.Length - 3); closedtagsStack.Push(closedtag); } if (closedtagsStack.Count < opentagsStack.Count) { while (opentagsStack.Count > 0) { string tagstr = opentagsStack.Pop(); if (closedtagsStack.Count == 0 || tagstr != closedtagsStack.Peek()) { substr += "</" + tagstr + ">"; } else { closedtagsStack.Pop(); } } } return substr; } public static string TruncateHTMLSafeishWord(string text, int wordCount) { bool inTag = false; int cntr = 0; int cntrWords = 0; Char lastc = ' '; // loop through html, counting only viewable content foreach (Char c in text) { if (cntrWords == wordCount) break; cntr++; if (c == '<') { inTag = true; continue; } if (c == '>') { inTag = false; continue; } if (!inTag) { // do not count double spaces, and a space not in a tag counts as a word if (c == 32 && lastc != 32) cntrWords++; } } string substr = text.Substring(0, cntr) + " ..."; //search for nonclosed tags MatchCollection openedTags = new Regex("<[^/](.|\n)*?>").Matches(substr); MatchCollection closedTags = new Regex("<[/](.|\n)*?>").Matches(substr); // create stack Stack<string> opentagsStack = new Stack<string>(); Stack<string> closedtagsStack = new Stack<string>(); foreach (Match tag in openedTags) { string openedtag = tag.Value.Substring(1, tag.Value.Length - 2); // strip any attributes, sure we can use regex for this! if (openedtag.IndexOf(" ") >= 0) { openedtag = openedtag.Substring(0, openedtag.IndexOf(" ")); } // ignore brs as self-closed if (openedtag.Trim() != "br") { opentagsStack.Push(openedtag); } } foreach (Match tag in closedTags) { string closedtag = tag.Value.Substring(2, tag.Value.Length - 3); closedtagsStack.Push(closedtag); } if (closedtagsStack.Count < opentagsStack.Count) { while (opentagsStack.Count > 0) { string tagstr = opentagsStack.Pop(); if (closedtagsStack.Count == 0 || tagstr != closedtagsStack.Peek()) { substr += "</" + tagstr + ">"; } else { closedtagsStack.Pop(); } } } return substr; } public static string TruncateHTMLSafeishCharXML(string text, int charCount) { // your data, probably comes from somewhere, or as params to a methodint XmlDocument xml = new XmlDocument(); xml.LoadXml(text); // create a navigator, this is our primary tool XPathNavigator navigator = xml.CreateNavigator(); XPathNavigator breakPoint = null; // find the text node we need: while (navigator.MoveToFollowing(XPathNodeType.Text)) { string lastText = navigator.Value.Substring(0, Math.Min(charCount, navigator.Value.Length)); charCount -= navigator.Value.Length; if (charCount <= 0) { // truncate the last text. Here goes your "search word boundary" code: navigator.SetValue(lastText); breakPoint = navigator.Clone(); break; } } // first remove text nodes, because Microsoft unfortunately merges them without asking while (navigator.MoveToFollowing(XPathNodeType.Text)) { if (navigator.ComparePosition(breakPoint) == XmlNodeOrder.After) { navigator.DeleteSelf(); } } // moves to parent, then move the rest navigator.MoveTo(breakPoint); while (navigator.MoveToFollowing(XPathNodeType.Element)) { if (navigator.ComparePosition(breakPoint) == XmlNodeOrder.After) { navigator.DeleteSelf(); } } // moves to parent // then remove *all* empty nodes to clean up (not necessary): // TODO, add empty elements like <br />, <img /> as exclusion navigator.MoveToRoot(); while (navigator.MoveToFollowing(XPathNodeType.Element)) { while (!navigator.HasChildren && (navigator.Value ?? "").Trim() == "") { navigator.DeleteSelf(); } } // moves to parent navigator.MoveToRoot(); return navigator.InnerXml; } [TestMethod] public void TestTruncateHTMLSafeish() { // Case where we just make it to start of HREF (so effectively an empty link) // 'simple' nested none attributed tags Assert.AreEqual(@"<h1>1234</h1><b><i>56789</i>012</b>", TruncateHTMLSafeishChar( @"<h1>1234</h1><b><i>56789</i>012345</b>", 12)); // In middle of a! Assert.AreEqual(@"<h1>1234</h1><a href=""testurl""><b>567</b></a>", TruncateHTMLSafeishChar( @"<h1>1234</h1><a href=""testurl""><b>5678</b></a><i><strong>some italic nested in string</strong></i>", 7)); // more Assert.AreEqual(@"<div><b><i><strong>1</strong></i></b></div>", TruncateHTMLSafeishChar( @"<div><b><i><strong>12</strong></i></b></div>", 1)); // br Assert.AreEqual(@"<h1>1 3 5</h1><br />6", TruncateHTMLSafeishChar( @"<h1>1 3 5</h1><br />678<br />", 6)); } [TestMethod] public void TestTruncateHTMLSafeishWord() { // zero case Assert.AreEqual(@" ...", TruncateHTMLSafeishWord( @"", 5)); // 'simple' nested none attributed tags Assert.AreEqual(@"<h1>one two <br /></h1><b><i>three ...</i></b>", TruncateHTMLSafeishWord( @"<h1>one two <br /></h1><b><i>three </i>four</b>", 3), "we have added ' ...' to end of summary"); // In middle of a! Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four ...</b></a>", TruncateHTMLSafeishWord( @"<h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four five </b></a><i><strong>some italic nested in string</strong></i>", 4)); // start of h1 Assert.AreEqual(@"<h1>one two three ...</h1>", TruncateHTMLSafeishWord( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 3)); // more than words available Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i> ...", TruncateHTMLSafeishWord( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 99)); } [TestMethod] public void TestTruncateHTMLSafeishWordXML() { // zero case Assert.AreEqual(@" ...", TruncateHTMLSafeishWord( @"", 5)); // 'simple' nested none attributed tags string output = TruncateHTMLSafeishCharXML( @"<body><h1>one two </h1><b><i>three </i>four</b></body>", 13); Assert.AreEqual(@"<body>\r\n <h1>one two </h1>\r\n <b>\r\n <i>three</i>\r\n </b>\r\n</body>", output, "XML version, no ... yet and addeds '\r\n + spaces?' to format document"); // In middle of a! Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four ...</b></a>", TruncateHTMLSafeishCharXML( @"<body><h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four five </b></a><i><strong>some italic nested in string</strong></i></body>", 4)); // start of h1 Assert.AreEqual(@"<h1>one two three ...</h1>", TruncateHTMLSafeishCharXML( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 3)); // more than words available Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i> ...", TruncateHTMLSafeishCharXML( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 99)); } } }

Search Results

Search found 19170 results on 767 pages for 'microsoft azure'.

Page 733/767 | < Previous Page | 729 730 731 732 733 734 735 736 737 738 739 740 | Next Page >

- by charlie.mott

- by Dennis Vroegop

- by TheBroodian

- by Tim Murphy

- by Jeff

- by John Conwell

- by Renso

- by The Thing

- by Richard Lefebvre

- by user3529643

- by StuartBrierley

- by Ibuntu

- by Charles Young

- by Tim Murphy

- by Superbest

- by HighAltitudeCoder

- by Roman Schindlauer

- by DigiMortal

- by Roman Schindlauer

- by mbcrump

- by user763198

- by imekon

- by germandb

- by Sir Psycho

- by WickedW

< Previous Page | 729 730 731 732 733 734 735 736 737 738 739 740 | Next Page >