Search Results

Search found 33204 results on 1329 pages for 'id u'.

Page 734/1329 | < Previous Page | 730 731 732 733 734 735 736 737 738 739 740 741  | Next Page >

  • How can I repair my USB drive?

    - by yurko
    USB drive is in read only state and I can't repair it. First of all I tried erase it using dd: root@yurko-laptop:/home/yurko-laptop# ls -l /dev/disk/by-id | grep usb lrwxrwxrwx 1 root root 9 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0 -> ../../sdb lrwxrwxrwx 1 root root 10 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0-part1 -> ../../sdb1 root@yurko-laptop:/home/yurko-laptop# dd if=/dev/zero of=/dev/sdb dd: ?????? ? «/dev/sdb»: ?? ?????????? ????????? ????? 8257537+0 ??????? ??????? 8257536+0 ??????? ???????? ??????????? 4227858432 ????? (4,2 GB), 942,633 c, 4,5 MB/c After that I wanted to create new filesystem using fdisk: root@yurko-laptop:/home/yurko-laptop# fdisk /dev/sdb You will not be able to write the partition table. WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdb: 4227 MB, 4227858432 bytes 4 heads, 63 sectors/track, 32768 cylinders Units = cylinders of 252 * 512 = 129024 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 18 32768 4126596 b W95 FAT32 Command (m for help): fdisk showed that the partition still exists and I can't write the partition table. I tried to delete the existing partition: Command (m for help): d Selected partition 1 Command (m for help): w Unable to write /dev/sdb root@yurko-laptop:/home/yurko-laptop# Why am I not be able to write the partition table? Does it mean that some hardware failure occurred? And is it possible to repair the current USB drive? I've tried to use hdparm and it showed that the readonly flag is on: root@yurko-laptop:/home/yurko-laptop# hdparm /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: f0 00 05 00 00 00 00 0a 00 00 00 00 26 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 multcount = 0 (off) readonly = 1 (on) readahead = 256 (on) geometry = 1016/131/62, sectors = 8257536, start = 0

    Read the article

  • Html.BeginForm() not rendering properly

    - by Taskos George
    While searching in stackoverflow the other questions didn't exactly helped in my situation. How it would be possible to debug such an error like the one that the Html.BeginForm does not properly rendered to the page. I use this code @model ExtremeProduction.Models.SelectUserGroupsViewModel @{ ViewBag.Title = "User Groups"; } <h2>Groups for user @Html.DisplayFor(model => model.UserName)</h2> <hr /> @using (Html.BeginForm("UserGroups", "Account", FormMethod.Post, new { encType = "multipart/form-data", id = "userGroupsForm" })) { @Html.AntiForgeryToken() <div class="form-horizontal"> @Html.ValidationSummary(true) <div class="form-group"> <div class="col-md-10"> @Html.HiddenFor(model => model.UserName) </div> </div> <h4>Select Group Assignments</h4> <br /> <hr /> <table> <tr> <th> Select </th> <th> Group </th> </tr> @Html.EditorFor(model => model.Groups) </table> <br /> <hr /> <div class="form-group"> <div class="col-md-offset-2 col-md-10"> <input type="submit" value="Save" class="btn btn-default" /> </div> </div> </div> } <div> @Html.ActionLink("Back to List", "Index") </div> EDIT: Added the Model // Wrapper for SelectGroupEditorViewModel to select user group membership: public class SelectUserGroupsViewModel { public string UserName { get; set; } public string FirstName { get; set; } public string LastName { get; set; } public List<SelectGroupEditorViewModel> Groups { get; set; } public SelectUserGroupsViewModel() { this.Groups = new List<SelectGroupEditorViewModel>(); } public SelectUserGroupsViewModel(ApplicationUser user) : this() { this.UserName = user.UserName; this.FirstName = user.FirstName; this.LastName = user.LastName; var Db = new ApplicationDbContext(); // Add all available groups to the public list: var allGroups = Db.Groups; foreach (var role in allGroups) { // An EditorViewModel will be used by Editor Template: var rvm = new SelectGroupEditorViewModel(role); this.Groups.Add(rvm); } // Set the Selected property to true where user is already a member: foreach (var group in user.Groups) { var checkUserRole = this.Groups.Find(r => r.GroupName == group.Group.Name); checkUserRole.Selected = true; } } } // Used to display a single role group with a checkbox, within a list structure: public class SelectGroupEditorViewModel { public SelectGroupEditorViewModel() { } public SelectGroupEditorViewModel(Group group) { this.GroupName = group.Name; this.GroupId = group.Id; } public bool Selected { get; set; } [Required] public int GroupId { get; set; } public string GroupName { get; set; } } public class Group { public Group() { } public Group(string name) : this() { Roles = new List<ApplicationRoleGroup>(); Name = name; } [Key] [Required] public virtual int Id { get; set; } public virtual string Name { get; set; } public virtual ICollection<ApplicationRoleGroup> Roles { get; set; } } ** EDIT ** And I get this form http://i834.photobucket.com/albums/zz268/gtas/formmine_zpsf6470e02.png I should receive a form like the one that I copied the code like this http://i834.photobucket.com/albums/zz268/gtas/formcopied_zpsdb2f129e.png Any ideas where or how to look the source of evil that makes my life hard for some time now?

    Read the article

  • Failed dependencies warning while installing pure-ftpd

    - by Anil
    I am trying to install pure-ftpd which is getting failed with the following warnings warning: pure-ftpd-1.0.36-1.el5.rf.i386.rpm: Header V3 DSA/SHA1 Signature, key ID 6b8d79e6: NOKEY error: Failed dependencies: libmysqlclient.so.15 is needed by pure-ftpd-1.0.36-1.el5.rf.i386 libmysqlclient.so.15(libmysqlclient_15) is needed by pure-ftpd-1.0.36-1.el5.rf.i386 libpq.so.4 is needed by pure-ftpd-1.0.36-1.el5.rf.i386 I used locate libmysqlclient libpq where i could find libmysqlclient.so.16 and libpq.so.5 installed in my server I am using CentOS 6 server.

    Read the article

  • Why is my "Page [0]" not centered in my webpage?

    - by William
    My "Page [0]" text isn't centered on my webpage. Anyone know why? I could really use some help please. Here is the html: <html> <head> <title>Test Forum</title> <link href="http://prime.programming-designs.com/test_forum/style.css" rel="stylesheet" type="text/css" /> </head> <body> <a href="http://prime.programming-designs.com/test_forum/"><img src="http://prime.programming-designs.com/test_forum//images/banner1.png" alt="" id="banner" /></a> <h1>Test Forums</h1> <hr /> <div id="navi"><div id="naviheader">Boards</div><a href="http://prime.programming-designs.com/test_forum/viewboard.php?board=0">Testing</a><br /><a href="http://prime.programming-designs.com/test_forum/viewboard.php?board=1">General Discussion</a><br /><a href="http://prime.programming-designs.com/test_forum/viewboard.php?board=2">Video Games</a><br /><a href="http://prime.programming-designs.com/test_forum/viewboard.php?board=3">Anime and Manga</a><br /><a href="http://prime.programming-designs.com/test_forum/viewboard.php?board=4">BlazBlue</a><br /><a href="http://prime.programming-designs.com/test_forum/viewboard.php?board=5">Shin Megami Tensei</a><br /><a href="http://prime.programming-designs.com/test_forum/viewboard.php?board=6">Earthbound</a><br /><a href="http://prime.programming-designs.com/test_forum/viewboard.php?board=7">Phantasy Star</a><br /><a href="http://prime.programming-designs.com/test_forum/viewboard.php?board=8">Mobile Suit Gundam</a><br /></div> <div class="postbox"><h4>CyanPrime</h4><hr />Welcome to the King's Gate BBS!</div>Page: [<a href="http://prime.programming-designs.com/test_forum/index.php?page=0">0</a>] </body> </html> Here is the CSS: @charset "windows-1252"; body{ background-color: #EEFFF8; color: #000000; text-align: center; } .postbox{ text-align: left; margin: auto; background-color: #dbfef8; border: 1px solid #82FFCD; width: 50%; margin-top: 10px; } .stickypostbox{ text-align: left; margin: auto; background-color: #F5FFFA; border: 1px solid #82FFCD; width: 50%; margin-top: 10px; } h4{ margin: 0px 0px 0px 0px; padding: 0px 0px 0px 0px; color: #9932CC; } h1{ color: #551A8B; } hr{ color: #82FFCD; background-color: #82FFCD; height: 1px; border: 0px dotted #82FFCD; } a{ color: #7F00FF; text-decoration: none; } a:hover{ color: #7F00FF; text-decoration: underline; } form{ margin: 0px auto; width: 50%; } #formdiv { background-color:#dbfef8; border:1px solid #82FFCD; } .fielddiv1{ background-color: #f9f9f9; border: 1px solid #DBFEF8; vertical-align: middle; width: 45%; float: left; } .fielddiv2{ background-color: #f9f9f9; border: 1px solid #DBFEF8; vertical-align: middle; width: 100%; } .fieldtext1{ width: 50%; background-color: #82FFCD; float: left; } .fieldtext2{ width: 100%; background-color: #82FFCD; } #replydiv{ width: 100%; background-color: #DBFEF8; margin: 10px 0 10px 0; } #admindiv{ width: 100%; background-color: #DBFEF8; margin: 10px 0 10px 0; } #navi{ width: 200px; background-color: #dbfef8; border: 1px solid #82FFCD; text-align: left; float: left; } #naviheader{ width: 100%; background-color: #82FFCD; } #submitbutton{ border: 1px solid #82FFCD; background-color: #DBFEF8; color: #000000; margin-top: 5px; width: 100px; height: 20px; } #banner{ border: 1px solid #82FFCD; } .postbar{ margin-right: 0px; margin-top: 0px; } .bannedtext{ margin: 0px 0px 0px 0px; padding: 0px 0px 0px 0px; color: #FF0000; } And here is the webpage so you can get some context (you'll notice that my "page [0]" is centered on the other boards, but not the index. http://prime.programming-designs.com/test_forum/

    Read the article

  • DVD Drive Failing on Windows 7

    - by Seth Spearman
    I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

    Read the article

  • MySQL Stored Procedure

    - by xdevel2000
    I must convert some stored procedures from MS Sql Server to MySQL and in Sql Server I have these two variables: @@ERROR for a server error and @@IDENTITY for the last insert id are there MySql similar global variables?

    Read the article

  • CheckBox ListView SelectedValues DependencyProperty Binding

    - by Ristogod
    I am writing a custom control that is a ListView that has a CheckBox on each item in the ListView to indicate that item is Selected. I was able to do so with the following XAML. <ListView x:Class="CheckedListViewSample.CheckBoxListView" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" mc:Ignorable="d"> <ListView.Style> <Style TargetType="{x:Type ListView}"> <Setter Property="SelectionMode" Value="Multiple" /> <Style.Resources> <Style TargetType="ListViewItem"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="ListViewItem"> <Border BorderThickness="{TemplateBinding Border.BorderThickness}" Padding="{TemplateBinding Control.Padding}" BorderBrush="{TemplateBinding Border.BorderBrush}" Background="{TemplateBinding Panel.Background}" SnapsToDevicePixels="True"> <CheckBox IsChecked="{Binding IsSelected, RelativeSource={RelativeSource FindAncestor, AncestorType={x:Type ListViewItem}}}"> <CheckBox.Content> <ContentPresenter Content="{TemplateBinding ContentControl.Content}" ContentTemplate="{TemplateBinding ContentControl.ContentTemplate}" HorizontalAlignment="{TemplateBinding Control.HorizontalContentAlignment}" VerticalAlignment="{TemplateBinding Control.VerticalContentAlignment}" SnapsToDevicePixels="{TemplateBinding UIElement.SnapsToDevicePixels}" /> </CheckBox.Content> </CheckBox> </Border> </ControlTemplate> </Setter.Value> </Setter> </Style> </Style.Resources> </Style> </ListView.Style> </ListView> I however am trying to attempt one more feature. The ListView has a SelectedItems DependencyProperty that returns a collection of the Items that are checked. However, I need to implement a SelectedValues DependencyProperty. I also am implementing a SelectedValuesPath DependencyProperty. By using the SelectedValuesPath, I indicate the path where the values are found for each selected item. So if my items have an ID property, I can specify using the SelectedValuesPath property "ID". The SelectedValues property would then return a collection of ID values. I have this working also using this code in the code-behind: using System.Windows; using System.Windows.Controls; using System.ComponentModel; using System.Collections; using System.Collections.Generic; namespace CheckedListViewSample { /// <summary> /// Interaction logic for CheckBoxListView.xaml /// </summary> public partial class CheckBoxListView : ListView { public static DependencyProperty SelectedValuesPathProperty = DependencyProperty.Register("SelectedValuesPath", typeof(string), typeof(CheckBoxListView), new PropertyMetadata(string.Empty, null)); public static DependencyProperty SelectedValuesProperty = DependencyProperty.Register("SelectedValues", typeof(IList), typeof(CheckBoxListView), new PropertyMetadata(new List<object>(), null)); [Category("Appearance")] [Localizability(LocalizationCategory.NeverLocalize)] [Bindable(true)] public string SelectedValuesPath { get { return ((string)(base.GetValue(CheckBoxListView.SelectedValuesPathProperty))); } set { base.SetValue(CheckBoxListView.SelectedValuesPathProperty, value); } } [Bindable(true)] [DesignerSerializationVisibility(DesignerSerializationVisibility.Hidden)] [Category("Appearance")] public IList SelectedValues { get { return ((IList)(base.GetValue(CheckBoxListView.SelectedValuesPathProperty))); } set { base.SetValue(CheckBoxListView.SelectedValuesPathProperty, value); } } public CheckBoxListView() : base() { InitializeComponent(); base.SelectionChanged += new SelectionChangedEventHandler(CheckBoxListView_SelectionChanged); } private void CheckBoxListView_SelectionChanged(object sender, SelectionChangedEventArgs e) { List<object> values = new List<object>(); foreach (var item in SelectedItems) { if (string.IsNullOrWhiteSpace(SelectedValuesPath)) { values.Add(item); } else { try { values.Add(item.GetType().GetProperty(SelectedValuesPath).GetValue(item, null)); } catch { } } } base.SetValue(CheckBoxListView.SelectedValuesProperty, values); e.Handled = true; } } } My problem is that my binding only works one way right now. I'm having trouble trying to figure out how to implement my SelectedValues DependencyProperty so that I could Bind a Collection of values to it, and when the control is loaded, the CheckBoxes are checked with items that have values that correspond to the SelectedValues. I've considered using the PropertyChangedCallBack event, but can't quite figure out how I could write that to achieve my goal. I'm also unsure of how I find the correct ListViewItem to set it as Selected. And lastly, if I can find the ListViewItem and set it to be Selected, won't that fire my SelectionChanged event each time I set a ListViewItem to be Selected?

    Read the article

  • Log - Server kernel: INFO: task httpd:000000 blocked for more than 120 seconds

    - by valter
    Almost everyday my server is crashing due to hight server load, and even restarting apache or mysql can't solve the problem. I need to reboot the server to solve, or it crash again due to the high load. The log system records something like this when it crashes: Aug 11 18:33:53 server kernel: INFO: task httpd:20008 blocked for more than 120 seconds. Aug 11 18:33:53 server kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 11 18:33:53 server kernel: httpd D ffffffff801538ac 0 20008 5816 20066 19809 (NOTLB) Aug 11 18:33:53 server kernel: ffff81025a299dc8 0000000000000082 ffff81033b4c0740 ffffffff80009a14 Aug 11 18:33:53 server kernel: ffff8101063f8d80 0000000000000009 ffff8100b758f7e0 ffff8101c57187e0 Aug 11 18:33:53 server kernel: 00009436d4100b6c 000000000001d50f ffff8100b758f9c8 000000083b531588 Aug 11 18:33:53 server kernel: Call Trace: Aug 11 18:33:53 server kernel: [<ffffffff80009a14>] __link_path_walk+0x173/0xfb9 Aug 11 18:33:53 server kernel: [<ffffffff8002cc16>] mntput_no_expire+0x19/0x89 Aug 11 18:33:53 server kernel: [<ffffffff80063c4f>] __mutex_lock_slowpath+0x60/0x9b Aug 11 18:33:53 server kernel: [<ffffffff80023908>] __path_lookup_intent_open+0x56/0x97 Aug 11 18:33:53 server kernel: [<ffffffff80063c99>] .text.lock.mutex+0xf/0x14 Aug 11 18:33:53 server kernel: [<ffffffff8001b21f>] open_namei+0xea/0x712 Aug 11 18:33:54 server kernel: [<ffffffff8002768a>] do_filp_open+0x1c/0x38 Aug 11 18:33:54 server kernel: Firewall: *UDP_IN Blocked* IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:30:48:9e:6e:99:08:00 SRC=208.43.135.158 DST=255.255.255.255 LEN=151 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=38354 DPT=6112 LEN=131 Aug 11 18:33:54 server kernel: [<ffffffff8001a061>] do_sys_open+0x44/0xbe Aug 11 18:33:54 server kernel: [<ffffffff8005d28d>] tracesys+0xd5/0xe0 I googled a lot trying to find a solution. But it looks that the solution is just to update the kernel or disk driver, thinks that I don't know how to do. In this url http://bugs.centos.org/view.php?id=4515 a lot o people report similar problems, except the fact that they are not related to httpd like mine. According to one member, one solution would be to add "elevator=noop " to /etc/grub.conf like in this example: title CentOS (2.6.18-238.12.1.el5xen) root (hd0,0) kernel /vmlinuz-2.6.18-238.12.1.el5xen ro root=/dev/VolGroup00/LogVol00 elevator=noop initrd /initrd-2.6.18-238.12.1.el5xen.img Would this really solve the problem? My disk are working in RAID. Can this cause some problem to my server? Is there any other solution?

    Read the article

  • Rails form submission

    - by Danny McClelland
    Hi Everyone, I have a simple form to enter details of a new case (kase), it's working well and clicking submit stores the information and takes the user to the show.html.erb page. However, I wanted to move part of the form to the sidebar - to make things a little easier to see and use for the user, however, when I moved the section to the sidebar - anything entered during either a creation or edit within those sidebar fields is ignored. Any idea how I keep the fields in the sidebar, but include them as before? <% content_for :header do -%> Cases <% end -%> <% form_for(@kase) do |f| %> <%= f.error_messages %> <!-- #START SIDEBAR --> <% content_for :sidebar do -%> <% if @kase.avatar.exists? then %> <%= image_tag @kase.avatar.url %> <% else %> <p style="font-size:smaller"> You can upload an icon for this case that will display here. Usually this would be for the year number icon for easy recognition.</p> <% end %> <div class="js_option"> <h2>Financial Options</h2><p class="finance_showhide"><%= link_to_function "Show","Element.show('finance_showhide');" %> / <%= link_to_function "Hide","Element.hide('finance_showhide');" %></p> </div> <div id="finance_showhide" style="display:none"> <ul id="kases_new_finance"> <li>Invoice Number<span><%= f.text_field :invoicenumber %></span></li> <li>Net Amount<span><%= f.text_field :netamount %></span></li> <li>VAT<span><%= f.text_field :vat %></span></li> <li>Gross Amount<span><%= f.text_field :grossamount %></span></li> <li>Date Closed<span><%= f.text_field :dateclosed %></span></li> <li>Date Paid<span><%= f.text_field :datepaid %></span></li> </ul> </div> <% end -%> <!-- #END SIDEBAR --> <% form_for (@kase), :html => { :multipart => true } do |f| %> <ul id="kases_new"> <li>Job Ref.<span><%= f.text_field :jobno %></span></li> <li>Case Subject<span><%= f.text_field :casesubject %></span></li> <li>Transport<span><%= f.text_field :transport %></span></li> <li>Goods<span><%= f.text_field :goods %></span></li> <li>Date Instructed<span><%= f.date_select :dateinstructed %></span></li> <li>Case Status<span><%= f.select "kase_status", ['Active', 'On Hold', 'Archived', 'Invoice Sent'] %></span></li> <li>Client Reference<span><%= f.text_field :clientref %></span></li> <li>Client Company Name<span><%= f.text_field :clientcompanyname %></span></li> <li>Client Company Address<span><%= f.text_field :clientcompanyaddress %></span></li> <li>Client Company Fax<span><%= f.text_field :clientcompanyfax %></span></li> <li>Case Handler Name<span><%= f.text_field :casehandlername %></span></li> <li>Case Handler Tel<span><%= f.text_field :casehandlertel %></span></li> <li>Case Handler Email<span><%= f.text_field :casehandleremail %></span></li> <li>Claimant Name<span><%= f.text_field :claimantname %></span></li> <li>Claimant Address<span><%= f.text_field :claimantaddress %></span></li> <li>Claimant Contact<span><%= f.text_field :claimantcontact %></span></li> <li>Claimant Tel<span><%= f.text_field :claimanttel %></span></li> <li>Claimant Mob<span><%= f.text_field :claimantmob %></span></li> <li>Claimant Email<span><%= f.text_field :claimantemail %></span></li> <li>Claimant URL<span><%= f.text_field :claimanturl %></span></li> <li>Comments<span><%= f.text_field :comments %></span></li> </ul> <p> <%= f.submit "Create" %> </p> <% end %><% end %> <%= link_to 'Back', kases_path %>

    Read the article

  • DVD Drive Failing on Windows 7

    - by Seth Spearman
    Hello, I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

    Read the article

  • BEX error in Windows Vista in hearts.exe

    - by bipin
    I have got an error in Windows Vista and my games are not playing. What should I do? Problem Event Name: BEX Application Name: Hearts.exe Application Version: 6.0.6002.18005 Application Timestamp: 49e01e10 Fault Module Name: StackHash_fd00 Fault Module Version: 0.0.0.0 Fault Module Timestamp: 00000000 Exception Offset: 0253a350 Exception Code: c0000005 Exception Data: 00000008 OS Version: 6.0.6002.2.2.0.768.3 Locale ID: 16393 Additional Information 1: fd00 Additional Information 2: ea6f5fe8924aaa756324d57f87834160 Additional Information 3: fd00 Additional Information 4: ea6f5fe8924aaa756324d57f87834160

    Read the article

  • bex error in vista in hearts.exe

    - by bipin
    i have got the error in vista and my games are not playing only tell the solution Problem Event Name: BEX Application Name: Hearts.exe Application Version: 6.0.6002.18005 Application Timestamp: 49e01e10 Fault Module Name: StackHash_fd00 Fault Module Version: 0.0.0.0 Fault Module Timestamp: 00000000 Exception Offset: 0253a350 Exception Code: c0000005 Exception Data: 00000008 OS Version: 6.0.6002.2.2.0.768.3 Locale ID: 16393 Additional Information 1: fd00 Additional Information 2: ea6f5fe8924aaa756324d57f87834160 Additional Information 3: fd00 Additional Information 4: ea6f5fe8924aaa756324d57f87834160

    Read the article

  • Apache and MySQL taking all the memory? Maximum connections?

    - by lpfavreau
    I've a had one of our servers going down (network wise) but keeping its uptime (so looks the server is not losing its power) recently. I've asked my hosting company to investigate and I've been told, after investigation, that Apache and MySQL were at all time using 80% of the memory and peaking at 95% and that I might be needing to add some more RAM to the server. One of their justifications to adding more RAM was that I was using the default max connections setting (125 for MySQL and 150 for Apache) and that for handling those 150 simultaneous connections, I would need at least 3Gb of memory instead of the 1Gb I have at the moment. Now, I understand that tweaking the max connections might be better than me leaving the default setting although I didn't feel it was a concern at the moment, having had servers with the same configuration handle more traffic than the current 1 or 2 visitors before the lunch, telling myself I'd tweak it depending on the visits pattern later. I've also always known Apache was more memory hungry under default settings than its competitor such as nginx and lighttpd. Nonetheless, looking at the stats of my machine, I'm trying to see how my hosting company got those numbers. I'm getting: # free -m total used free shared buffers cached Mem: 1000 944 56 0 148 725 -/+ buffers/cache: 71 929 Swap: 1953 0 1953 Which I guess means that yes, the server is reserving around 95% of its memory at the moment but I also thought it meant that only 71 out of the 1000 total were really used by the applications at the moment looking a the buffers/cache row. Also I don't see any swapping: # vmstat 60 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 57612 151704 742596 0 0 1 1 3 11 0 0 100 0 0 0 0 57604 151704 742596 0 0 0 1 1 24 0 0 100 0 0 0 0 57604 151704 742596 0 0 0 2 1 18 0 0 100 0 0 0 0 57604 151704 742596 0 0 0 0 1 13 0 0 100 0 And finally, while requesting a page: top - 08:33:19 up 3 days, 13:11, 2 users, load average: 0.06, 0.02, 0.00 Tasks: 81 total, 1 running, 80 sleeping, 0 stopped, 0 zombie Cpu(s): 1.3%us, 0.3%sy, 0.0%ni, 98.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1024616k total, 976744k used, 47872k free, 151716k buffers Swap: 2000052k total, 0k used, 2000052k free, 742596k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 24914 www-data 20 0 26296 8640 3724 S 2 0.8 0:00.06 apache2 23785 mysql 20 0 125m 18m 5268 S 1 1.9 0:04.54 mysqld 24491 www-data 20 0 25828 7488 3180 S 1 0.7 0:00.02 apache2 1 root 20 0 2844 1688 544 S 0 0.2 0:01.30 init ... So, I'd like to know, experts of serverfault: Do I really need more RAM at the moment? How do they calculate that for 150 simultaneous connections I'd need 3Gb? Thanks for your help!

    Read the article

  • Android SQLite Problem: Program Crash When Try a Query!

    - by Skatephone
    Hi i have a problem programming with android SDK 1.6. I'm doing the same things of the "notepad exaple" but the programm crash when i try some query. If i try to do a query directly in to the DatabaseHelper create() metod it goes, but out of this function it doesn't. Do you have any idea? this is the source: public class DbAdapter { public static final String KEY_NAME = "name"; public static final String KEY_TOT_DAYS = "totdays"; public static final String KEY_ROWID = "_id"; private static final String TAG = "DbAdapter"; private DatabaseHelper mDbHelper; private SQLiteDatabase mDb; private static final String DATABASE_NAME = "flowratedb"; private static final String DATABASE_TABLE = "girl_data"; private static final String DATABASE_TABLE_2 = "girl_cyle"; private static final int DATABASE_VERSION = 2; /** * Database creation sql statement */ private static final String DATABASE_CREATE = "create table "+DATABASE_TABLE+" (id integer, name text not null, totdays int);"; private static final String DATABASE_CREATE_2 = "create table "+DATABASE_TABLE_2+" (ref_id integer, day long not null);"; private final Context mCtx; private static class DatabaseHelper extends SQLiteOpenHelper { DatabaseHelper(Context context) { super(context, DATABASE_NAME, null, DATABASE_VERSION); } @Override public void onCreate(SQLiteDatabase db) { db.execSQL(DATABASE_CREATE); db.execSQL(DATABASE_CREATE_2); db.delete(DATABASE_TABLE, null, null); db.delete(DATABASE_TABLE_2, null, null); } @Override public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) { Log.w(TAG, "Upgrading database from version " + oldVersion + " to " + newVersion + ", which will destroy all old data"); db.execSQL("DROP TABLE IF EXISTS "+DATABASE_TABLE); db.execSQL("DROP TABLE IF EXISTS "+DATABASE_TABLE_2); onCreate(db); } } public DbAdapter(Context ctx) { this.mCtx = ctx; } public DbAdapter open() throws SQLException { mDbHelper = new DatabaseHelper(mCtx); mDb = mDbHelper.getWritableDatabase(); return this; } public void close() { mDbHelper.close(); } public long createGirl(int id,String name, int totdays) { ContentValues initialValues = new ContentValues(); initialValues.put(KEY_ROWID, id); initialValues.put(KEY_NAME, name); initialValues.put(KEY_TOT_DAYS, totdays); return mDb.insert(DATABASE_TABLE, null, initialValues); } public long createGirl_fd_day(int refid, long fd) { ContentValues initialValues = new ContentValues(); initialValues.put("ref_id", refid); initialValues.put("calendar", fd); return mDb.insert(DATABASE_TABLE, null, initialValues); } public boolean updateGirl(int rowId, String name, int totdays) { ContentValues args = new ContentValues(); args.put(KEY_NAME, name); args.put(KEY_TOT_DAYS, totdays); return mDb.update(DATABASE_TABLE, args, KEY_ROWID + "=" + rowId, null) > 0; } public boolean deleteGirlsData() { if (mDb.delete(DATABASE_TABLE_2, null, null)>0) if(mDb.delete(DATABASE_TABLE, null, null)>0) return true; return false; } public Bundle fetchAllGirls() { Bundle extras = new Bundle(); Cursor cur = mDb.query(DATABASE_TABLE, new String[] {KEY_ROWID, KEY_NAME, KEY_TOT_DAYS}, null, null, null, null, null); cur.moveToFirst(); int tot = cur.getCount(); extras.putInt("tot", tot); int index; for (int i=0;i<tot;i++){ index=cur.getInt(cur.getColumnIndex("_id")); extras.putString("name"+index, cur.getString(cur.getColumnIndex("name"))); extras.putInt("totdays"+index, cur.getInt(cur.getColumnIndex("totdays"))); } cur.close(); return extras; } public Cursor fetchGirl(int rowId) throws SQLException { Cursor mCursor = mDb.query(true, DATABASE_TABLE, new String[] {KEY_ROWID, KEY_NAME, KEY_TOT_DAYS}, KEY_ROWID + "=" + rowId, null, null, null, null, null); if (mCursor != null) { mCursor.moveToFirst(); } return mCursor; } public Cursor fetchGirlCD(int rowId) throws SQLException { Cursor mCursor = mDb.query(true, DATABASE_TABLE_2, new String[] {"ref_id", "day"}, "ref_id=" + rowId, null, null, null, null, null); if (mCursor != null) { mCursor.moveToFirst(); } return mCursor; } } Tank's Valerio From Italy :)

    Read the article

  • Optimizing a 3D World Javascript Animation

    - by johnny
    Hi! I've recently come up with the idea to create a tag cloud like animation shaped like the earth. I've extracted the coastline coordinates from ngdc.noaa.gov and wrote a little script that displayed it in my browser. Now as you can imagine, the whole coastline consists of about 48919 points, which my script would individually render (each coordinate being represented by one span). Obviously no browser is capable of rendering this fluently - but it would be nice if I could render as much as let's say 200 spans (twice as much as now) on my old p4 2.8 Ghz (as a representative benchmark). Are there any javascript optimizations I could use in order to speed up the display of those spans? One 'coordinate': <div id="world_pixels"> <span id="wp_0" style="position:fixed; top:0px; left:0px; z-index:1; font-size:20px; cursor:pointer;cursor:hand;" onmouseover="magnify_world_pixel('wp_0');" onmouseout="shrink_world_pixel('wp_0');" onClick="set_askcue_bar('', 'new york')">new york</span> </div> The script: $(document).ready(function(){ world_pixels = $("#world_pixels span"); world_pixels.spin(); setInterval("world_pixels.spin()",1500); }); z = new Array(); $.fn.spin = function () { for(i=0; i<this.length; i++) { /*actual screen coordinates: x/y/z --> left/font-size/top 300/13/0 300/6/300 | / |/ 0/13/300 ----|---- 600/13/300 /| / | 300/20/300 300/13/600 */ /*scale font size*/ var resize_x = 1; /*scale width*/ var resize_y = 2.5; /*scale height*/ var resize_z = 2.5; var from_left = 300; var from_top = 20; /*actual math coordinates: 1 -1 | / |/ 1 ----|---- -1 /| / | 1 -1 */ //var get_element = document.getElementById(); //var font_size = parseInt(this.style.fontSize); var font_size = parseInt($(this[i]).css("font-size")); var left = parseInt($(this[i]).css("left")); if (coast_line_array[i][1]) { } else { var top = parseInt($(this[i]).css("top")); z[i] = from_top + (top - (300 * resize_z)) / (300 * resize_z); //global beacause it's used in other functions later on var top_new = from_top + Math.round(Math.cos(coast_line_array[i][2]/90*Math.PI) * (300 * resize_z) + (300 * resize_z)); $(this[i]).css("top", top_new); coast_line_array[i][3] = 1; } var x = resize_x * (font_size - 13) / 7; var y = from_left + (left- (300 * resize_y)) / (300 * resize_y); if (y >= 0) { this[i].phi = Math.acos(x/(Math.sqrt(x^2 + y^2))); } else { this[i].phi = 2*Math.PI - Math.acos(x/(Math.sqrt(x^2 + y^2))); i } this[i].theta = Math.acos(z[i]/Math.sqrt(x^2 + y^2 + z[i]^2)); var font_size_new = resize_x * Math.round(Math.sin(coast_line_array[i][4]/90*Math.PI) * Math.cos(coast_line_array[i][0]/180*Math.PI) * 7 + 13); var left_new = from_left + Math.round(Math.sin(coast_line_array[i][5]/90*Math.PI) * Math.sin(coast_line_array[i][0]/180*Math.PI) * (300 * resize_y) + (300 * resize_y)); //coast_line_array[i][6] = coast_line_array[i][7]+1; if ((coast_line_array[i][0] + 1) > 180) { coast_line_array[i][0] = -180; } else { coast_line_array[i][0] = coast_line_array[i][0] + 0.25; } $(this[i]).css("font-size", font_size_new); $(this[i]).css("left", left_new); } } resize_x = 1; function magnify_world_pixel(element) { $("#"+element).animate({ fontSize: resize_x*30+"px" }, { duration: 1000 }); } function shrink_world_pixel(element) { $("#"+element).animate({ fontSize: resize_x*6+"px" }, { duration: 1000 }); } I'd appreciate any suggestions to optimize my script, maybe there is even a totally different approach on how to go about this. The whole .js file which stores the array for all the coordinates is available on my page, the file is about 2.9 mb, so you might consider pulling the .zip for local testing: metaroulette.com/files/31218.zip metaroulette.com/files/31218.js P.S. the php I use to create the spans: <?php //$arbitrary_characters = array('a','b','c','ddsfsdfsdf','e','f','g','h','isdfsdffd','j','k','l','mfdgcvbcvbs','n','o','p','q','r','s','t','uasdfsdf','v','w','x','y','z','0','1','2','3','4','5','6','7','8','9',); $arbitrary_characters = array('cat','table','cool','deloitte','askcue','what','more','less','adjective','nice','clinton','mars','jupiter','testversion','beta','hilarious','lolcatz','funny','obama','president','nice','what','misplaced','category','people','religion','global','skyscraper','new york','dubai','helsinki','volcano','iceland','peter','telephone','internet', 'dialer', 'cord', 'movie', 'party', 'chris', 'guitar', 'bentley', 'ford', 'ferrari', 'etc', 'de facto'); for ($i=0; $i<96; $i++) { $arb_digits = rand (0,45); $arbitrary_character = $arbitrary_characters[$arb_digits]; //$arbitrary_character = "."; echo "<span id=\"wp_$i\" style=\"position:fixed; top:0px; left:0px; z-index:1; font-size:20px; cursor:pointer;cursor:hand;\" onmouseover=\"magnify_world_pixel('wp_$i');\" onmouseout=\"shrink_world_pixel('wp_$i');\" onClick=\"set_askcue_bar('', '$arbitrary_character')\">$arbitrary_character</span>\n"; } ?>

    Read the article

  • Change Fedora 12 Hostname through gui

    - by drozzy
    How can I change fedora 12 hostname using gui tools (network connections) only, without editing config files? All I can see right now if I select "Manual" in IPv4 settings is "DNS servers" or DHCP client ID, neither of which sounds like "domain/hostname" combination. Tips?

    Read the article

  • Change Fedora 12 Hostname through gui

    - by drozzy
    How can I change fedora 12 hostname using gui tools (network connections) only, without editing config files? All I can see right now if I select "Manual" in IPv4 settings is "DNS servers" or DHCP client ID, neither of which sounds like "domain/hostname" combination. Tips?

    Read the article

  • Weird DNS bug - external server resolves to internal IP

    - by emilecantin
    I have a server that is hosted by my university. I have root access, but no control over network setup, firewall, etc. This server's DNS resolves to an internal IP here on campus (10.x.x.x), and an external IP outside campus. I also have a few servers hosted at Amazon, and they mostly work well. However, one of them started to resolve the university server by its internal IP address. This causes problems, as 10.x.x.x on Amazon EC2 is someone else. I have connected to the Amazon server with SSH agent forwarding a few times in the past, to access a Git repository on the university server. Any idea what could cause this? EDIT: Here's my /etc/resolv.conf # Generated by dhcpcd for interface eth0 search ec2.internal nameserver 172.16.0.23 Here's the output of dig myserver.myuniversity.ca.: ; <<>> DiG 9.8.1-P1 <<>> myserver.myuniversity.ca. ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 34470 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;myserver.myuniversity.ca. IN A ;; ANSWER SECTION: myserver.myuniversity.ca. 537586 IN A 10.43.x.x ;; Query time: 2 msec ;; SERVER: 172.16.0.23#53(172.16.0.23) ;; WHEN: Wed Nov 28 16:07:21 2012 ;; MSG SIZE rcvd: 60 Here's the expected output (on another Amazon server): ; <<>> DiG 9.8.1-P1 <<>> myserver.myuniversity.ca. ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 8045 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;myserver.myuniversity.ca. IN A ;; ANSWER SECTION: myserver.myuniversity.ca. 601733 IN A x.x.239.1 ;; Query time: 1 msec ;; SERVER: 172.16.0.23#53(172.16.0.23) ;; WHEN: Wed Nov 28 16:09:36 2012 ;; MSG SIZE rcvd: 60

    Read the article

  • What PHP, Xdebug and Eclipse configurations work on Windows 7 64 bit?

    - by thaddeusmt
    I have been mucking around for days, trying to find the right combination that lets me debug with breakpoints and variable viewing, in Eclipse, without crashing Apache. PHP 5.3? PHP 5.2? Eclipse Helios? Eclipse Galileo? One or the other with certain versions of xdebug or php? Or do I really need to use NetBeans or something else? Is my 64 bit OS the problem? Do need specific 64bit versions of PHP, Eclipse or Xdebug to work on Windows 7 64? Any special xdebug config options and tricks that I need in php.ini? Like turning off xdebug.profiler_enable or not using quotes around my zend_extension path to the xdebug dll? A Vhosts issue? Scrap the whole thing and go back to Win XP or Ubuntu? Here's what I've already been reading: http://stackoverflow.com/questions/4509245/so-eclipse-and-xdebug-walk-into-a-bar-and-then-my-apache-server-dies/4602473 http://stackoverflow.com/questions/206788/why-does-xdebug-crash-apache-on-every-xampp-install-ive-tried http://bugs.xdebug.org/view.php?id=459 https://bugs.eclipse.org/bugs/show_bug.cgi?id=312951#c8 http://stackoverflow.com/questions/2799936/xdebug-for-php-5-2-on-windows-7-64bit and so and so on... SO, xdebug bug tracker, eclipse bugzilla, etc, etc Basically what would be great is if folks could post their working (i.e. debugging with breakpoints and local variable viewing in Eclipse) Win7 64bit configurations, including: PHP version (5.3.1, 5.2.11, etc) Xdebug dll (2.1.0-5.3-vc6, etc) Xdebug php.ini config (zend_extension = "C:\xampp\php\ext\php_xdebug.dll", etc) Apache version (2.2.14, etc) Eclipse version Anything else important? The "secret ingredient"? Thanks! I miss my debugger since I got a new laptop with Win 7! Sadly it looks like some of the drivers (switchable graphics, multi-touch pad, etc) on my lappy don't work right with Ubuntu yet, so I feel a bit trapped on Win :( I know I will figure something out eventually, but I've been at this trial-and-error game a while and am seeking some guidance. (Originally posted on StackOverflow here, but moved to SuperUser:) http://stackoverflow.com/questions/4628215/what-php-xdebug-and-eclipse-configurations-work-on-windows-7-64-bit

    Read the article

  • Email server can send internal, but messages never arrive at external recipients

    - by Chase Florell
    I'm running MailEnable on my server, and have been for many years. Recently we had an attack on our server, and I was able to close the hole. Since then, our mail server doesn't seem to be sending mail out. If I send an email from myself to another account hosted on the server, the email arrives as expected. If I send an email from my gmail account to my business account, the email also arrives as expected The problem comes when I send from my business account to an external domain I tried the following Gmail.com Hotmail.com Shaw.ca When I send to any of the above The message leaves my client as expected, The logs appear to accept and forward on the message The SMTP outbound que is empty The message never arrives I have checked our domain with mxtoolbox.com senderbase.org And neither of them are reporting any problems with our domain. I have ensured that port 25 is open (along with the other standard ports) Here is one of the log entries from the SMTP connector 11/05/13 12:10:00 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 220 mx1.example.com ESMTP MailEnable Service, Version: 6.81--6.81 ready at 11/05/13 12:10:00 0 0 11/05/13 12:10:00 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 EHLO EHLO ASSP.nospam 250-mx1.example.com [127.0.0.1], this server offers 6 extensions 159 18 11/05/13 12:10:00 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 EHLO EHLO ASSP.nospam 250-mx1.example.com [127.0.0.1], this server offers 6 extensions 159 18 11/05/13 12:10:01 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 AUTH AUTH LOGIN 334 VXNlcm5hbWU6 18 12 11/05/13 12:10:01 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 AUTH {blank} 334 UGFzc3dvcmQ6 18 26 [email protected] 11/05/13 12:10:01 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 AUTH Y29sb25lbGZhY2U= 235 Authenticated 19 18 [email protected] 11/05/13 12:10:01 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 MAIL MAIL FROM:<[email protected]> 250 Requested mail action okay, completed 43 31 [email protected] 11/05/13 12:10:01 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 RCPT RCPT TO:<[email protected]> 250 Requested mail action okay, completed 43 35 [email protected] 11/05/13 12:10:01 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 DATA DATA 354 Start mail input; end with <CRLF>.<CRLF> 46 6 [email protected] Here are the headers of the sent message X-Assp-Version: 1.7.5.7(1.0.07) on ASSP.nospam X-Assp-ID: ASSP.nospam 78601-04523 X-Assp-Intended-For: [email protected] X-Assp-Envelope-From: [email protected] Received: from [10.10.1.101] ([68.147.245.149] helo=[10.10.1.101]) with IPv4:587 by ASSP.nospam; 5 Nov 2013 12:10:00 -0700 From: Chase Florell <[email protected]> Content-Type: text/plain Content-Transfer-Encoding: 7bit Subject: Test Message Message-Id: <[email protected]> Date: Tue, 5 Nov 2013 12:10:18 -0700 To: Chase Florell <[email protected]> Mime-Version: 1.0 (Mac OS X Mail 7.0 \(1816\)) X-Mailer: Apple Mail (2.1816) . Where else can I check to see if there is something broken? What could cause a problem like this whereby the message appears to send, but never arrives, and never returns a bounce?

    Read the article

  • Task scheduler ran a task twice

    - by Ross Buggins
    Update: This has now happened two days in a row. Update: XML of scheduled tasks and images now included. Two servers located in London, both Windows 2012, have a scheduled task set to run at 3pm Monday to Friday. This has been set up for the last 5 months without a problem. However, on Monday the 28th of August they both ran the scheduled task at 3pm and then again at 4pm. When it was first reported, I thought it was too much of a coincidence to be the day after the clocks had gone back an hour. However, I’m failing in being able to explain why it has happened and if it is related to the clock change at all. The relevant logs from one server (the logs for the other follow this pattern as well): Event 129 15:00:20 Task Scheduler launch task "\3pm", instance "C:\Program Files (x86)\PHP\v5.4\php.exe" with process ID 2388. Event 100 15:00:20 Task Scheduler started "{75a3590f-dec1-4dee-bd27-73d63a50a9d7}" instance of the "\3pm" task for user "x\y". Event 200 15:00:20 Task Scheduler launched action "C:\Program Files (x86)\PHP\v5.4\php.exe" in instance "{75a3590f-dec1-4dee-bd27-73d63a50a9d7}" of task "\3pm". Event 201 15:00:23 Task Scheduler successfully completed task "\3pm" , instance "{75a3590f-dec1-4dee-bd27-73d63a50a9d7}" , action "C:\Program Files (x86)\PHP\v5.4\php.exe" with return code 0. Event 129 16:00:20 Task Scheduler launch task "\3pm", instance "C:\Program Files (x86)\PHP\v5.4\php.exe" with process ID 1224. Event 100 16:00:20 Task Scheduler started "{3dd46ca9-c525-4796-86b5-5e513fd45f26}" instance of the "\3pm" task for user "x\y". Event 200 16:00:20 Task Scheduler launched action "C:\Program Files (x86)\PHP\v5.4\php.exe" in instance "{3dd46ca9-c525-4796-86b5-5e513fd45f26}" of task "\3pm". Event 201 16:00:23 Task Scheduler successfully completed task "\3pm" , instance "{3dd46ca9-c525-4796-86b5-5e513fd45f26}" , action "C:\Program Files (x86)\PHP\v5.4\php.exe" with return code 0. I've seen this question Scheduled task running twice from time to time which points to a bug at http://support.microsoft.com/kb/2461249 being the cause. However, this doesn't include Server 2012 in it's list of problem operating systems. I’m struggling to explain this, can anyone else? The XML export for the scheduled task is: <?xml version="1.0" encoding="UTF-16"?> <Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task"> <RegistrationInfo> <Date>2013-04-16T14:04:17.4897806</Date> <Author>x\y</Author> </RegistrationInfo> <Triggers> <CalendarTrigger> <StartBoundary>2013-04-17T15:00:20</StartBoundary> <Enabled>true</Enabled> <ScheduleByWeek> <DaysOfWeek> <Monday /> <Tuesday /> <Wednesday /> <Thursday /> <Friday /> </DaysOfWeek> <WeeksInterval>1</WeeksInterval> </ScheduleByWeek> </CalendarTrigger> </Triggers> <Principals> <Principal id="Author"> <UserId>x\y</UserId> <LogonType>Password</LogonType> <RunLevel>LeastPrivilege</RunLevel> </Principal> </Principals> <Settings> <MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy> <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries> <StopIfGoingOnBatteries>true</StopIfGoingOnBatteries> <AllowHardTerminate>true</AllowHardTerminate> <StartWhenAvailable>false</StartWhenAvailable> <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable> <IdleSettings> <StopOnIdleEnd>true</StopOnIdleEnd> <RestartOnIdle>false</RestartOnIdle> </IdleSettings> <AllowStartOnDemand>true</AllowStartOnDemand> <Enabled>true</Enabled> <Hidden>false</Hidden> <RunOnlyIfIdle>false</RunOnlyIfIdle> <WakeToRun>false</WakeToRun> <ExecutionTimeLimit>P3D</ExecutionTimeLimit> <Priority>7</Priority> </Settings> <Actions Context="Author"> <Exec> <Command>"C:\Program Files (x86)\PHP\v5.4\php.exe"</Command> <Arguments>-f "c:\a.php"</Arguments> </Exec> </Actions> </Task> 29 October 17:00 - Update - Both servers have again run the scheduled task at 15:00 and 16:00. I've now updated the php file that is run by the scheduler to not actually do anything whilst I'm going through trying to solve this. I'm planning on restarting one server to see if this changes anything tomorrow. 30 October 08:25 - Update - When exporting the task XML I remembered that I hadn't included the fact that the scheduled task on second server was created by importing the XML of the task created on the first. The only difference between the two tasks is the path of the php file they are executing and the user account that they are running as.

    Read the article

  • Get CoreLocation Update before TableView population?

    - by Clemens
    hi, i have the corelocation stuff in an uitableview controller. i actually want to get a distance from two locations and print that distance in a tableview cell. the problem is, that the tableview is filled before all the corelocation stuff happens. how can i make corelocation makes all updates before the table is filled? heres my class: // // EntriesListViewController.m // OEAW_App // // Created by Clemens on 6/6/10. // Copyright 2010 MyCompanyName. All rights reserved. // import "EntriesListViewController.h" import "EntryDetailController.h" @implementation EntriesListViewController @synthesize locationManager; @synthesize delegate; NSMutableDictionary *entries; NSMutableDictionary *dictionary; CLLocation *coords; /- (id) init { self = [super init]; if (self != nil) { self.locationManager = [[[CLLocationManager alloc] init] autorelease]; self.locationManager.delegate = self; } return self; }/ (CLLocationManager *)locationManager { if (locationManager != nil) { return locationManager; } locationManager = [[CLLocationManager alloc] init]; locationManager.desiredAccuracy = kCLLocationAccuracyNearestTenMeters; locationManager.delegate = self; return locationManager; } (void)locationManager:(CLLocationManager *)manager didUpdateToLocation:(CLLocation *)newLocation fromLocation:(CLLocation *)oldLocation { //coords.longitude = newLocation.coordinate.longitude; //coords.latitude = newLocation.coordinate.latitude; coords = newLocation; NSLog(@"Location: %@", [newLocation description]); } (void)locationManager:(CLLocationManager *)manager didFailWithError:(NSError *)error { NSLog(@"Error: %@", [error description]); } (void)viewDidLoad { //[[MyCLController alloc] init]; //[locationManager startUpdatingLocation]; [[self locationManager] startUpdatingLocation]; //---initialize the array--- //entries = [[NSMutableArray alloc] init]; //---add items--- //NSString *Path = [[NSBundle mainBundle] bundlePath]; //NSString *DataPath = [Path stringByAppendingPathComponent:@"Memorials.plist"]; dictionary = [[NSDictionary alloc] initWithContentsOfURL:[NSURL URLWithString: @"http://akm.madison.at/memorials.xml"]]; /*NSDictionary *dssItem = [dictionary objectForKey:@"1"]; NSString *text = [dssItem objectForKey:@"text"]; */ //entries = [[NSMutableDictionary alloc] init]; NSLog(@"%@", dictionary); //Path get the path to MyTestList.plist NSString *path=[[NSBundle mainBundle] pathForResource:@"Memorials" ofType:@"plist"]; //Next create the dictionary from the contents of the file. NSDictionary *dict=[NSDictionary dictionaryWithContentsOfFile:path]; //now we can use the items in the file. // self.name.text = [dict valueForKey:@"Name"] ; NSLog(@"%@",[dict valueForKey:@"Name"]); //---set the title--- self.navigationItem.title = @"Türkendenkmäler"; [super viewDidLoad]; } (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { // Return the number of sections. return 1; } (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { // Return the number of rows in the section. return [dictionary count]; } // Customize the appearance of table view cells. - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleValue1 reuseIdentifier:CellIdentifier] autorelease]; } // Configure the cell... NSArray *keys = [dictionary allKeys]; id key = [keys objectAtIndex:indexPath.row]; NSDictionary *tmp = [dictionary objectForKey:key]; NSString *name = [tmp objectForKey:@"name"]; cell.textLabel.text = name; cell.font = [UIFont fontWithName:@"Helvetica" size:12.0]; CLLocation *location = [[CLLocation alloc] initWithLatitude:[[tmp valueForKey:@"coords_x"] floatValue] longitude:[[tmp valueForKey:@"coords_y"] floatValue]]; /*CLLocation *newLoc = [[CLLocation alloc] initWithLatitude:coords.latitude longitude:coords.longitude];*/ //locationController = [[MyCLController alloc] init]; int distance = [coords distanceFromLocation:location]; NSLog(@"%@",distance); cell.detailTextLabel.text = [NSString stringWithFormat:@"%@m",distance]; //NSLog(@"%@", [getLocation newLoc]); return cell; } (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { EntryDetailController *detailViewController = [[EntryDetailController alloc] initWithNibName:@"EntryDetailController" bundle:nil]; //detailViewController.entrySelected = [dictionary objectAtIndex:indexPath.row]; NSArray *keys = [dictionary allKeys]; id key = [keys objectAtIndex:indexPath.row]; NSDictionary *tmp = [dictionary objectForKey:key]; NSString *name = [tmp objectForKey:@"name"]; detailViewController.entrySelected_name = name; NSString *location = [tmp objectForKey:@"location"]; detailViewController.entrySelected_location = location; NSString *type = [tmp objectForKey:@"type"]; detailViewController.entrySelected_type = type; NSString *slug = [tmp objectForKey:@"slug"]; detailViewController.entrySelected_slug = slug; [self.navigationController pushViewController:detailViewController animated:YES]; [detailViewController release]; } (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; } (void)dealloc { [entries release]; [super dealloc]; } @end

    Read the article

< Previous Page | 730 731 732 733 734 735 736 737 738 739 740 741  | Next Page >