region specific - Page 735

Confirm disk is broken when it passes all diagnostics

- by Halfgaar

I have a system with a potentially broken disk, but the disk passes all manner of diagnostics. I have been unable to confirm that the disk is broken. What are my options? I could just replace the disk, but because this situation is very similar to another more severe situation I have (long story), I'd like to actually make a proper diagnosis as opposed to randomly binning hardware. The issue and history is this: I had a Debian Linux PC (500 MHz P3) acting as router, nagios and munin. It crashed every couple of weeks. No logs or dmesg could be obtained (because it's an old Compaq that only boots when you configure it as keyboardless, making connecting a keyboard later, once it's booted, impossible). At the time, I just replaced the computer with another Compaq (P4 2.4 GHz) because I thought the hardware was faulty. However, it still crashed every couple of weeks. the difference is that on this computer, I can still SSH into it. It gives all kinds of errors on hda. I'd like to confirm that the disk is broken, but nothing I do confirms this: SMART error logs shows no errors. Normally when a disk starts acting up, SMART my pass, but it still records a read-error in the error log. SMART self-test (smartctl -t long /dev/sda) completes without errors. re-allocated sector count (a tell-tale parameter) has been 31 all its life, even when the disk was still in use in my desktop PC years ago, and it still is. The figure never changed. dd if=/dev/sda of=/dev/null bs=4096 passes with flying colors. What else can I do to assess the health of the drive? Again, this is not about making this router fully functional again, this is a disk forensic question, because it just so happens that I have another server that potentially has the same problem, and knowing the answer to this will possibly help me greatly. For the record, below are logs and such. This is the smartctl -a output: smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 5JT1CLQM Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Jul 1 21:18:33 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 050 046 006 Pre-fail Always - 47766662 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 31 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 820305 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 46373 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 605 194 Temperature_Celsius 0x0022 036 065 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 47766662 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age Always - 6 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 46361 - # 2 Extended offline Completed without error 00% 46358 - # 3 Short offline Completed without error 00% 12046 - # 4 Extended offline Completed without error 00% 10472 - # 5 Short offline Completed without error 00% 10471 - # 6 Short offline Completed without error 00% 10471 - # 7 Short offline Completed without error 00% 6770 - # 8 Extended offline Aborted by host 90% 5958 - # 9 Extended offline Aborted by host 90% 5951 - #10 Short offline Completed without error 00% 5024 - #11 Extended offline Aborted by host 80% 5024 - #12 Short offline Completed without error 00% 3697 - #13 Short offline Completed without error 00% 237 - #14 Short offline Completed without error 00% 145 - #15 Short offline Completed without error 00% 69 - #16 Extended offline Completed without error 00% 68 - #17 Short offline Completed without error 00% 66 - #18 Short offline Completed without error 00% 49 - #19 Short offline Completed without error 00% 29 - #20 Short offline Completed without error 00% 29 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. And this is the dmesg error when it has crashed (which repeats for a bunch of different sectors): [1755091.211136] sd 0:0:0:0: [sda] Unhandled error code [1755091.211144] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1755091.211151] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 08 fe ad 38 00 00 08 00 [1755091.211166] end_request: I/O error, dev sda, sector 150908216

Read the article

Menu widget - no jQuery nor Javascript required - pure CSS

- by Renso

Goal: Create a menu widget that does not require any javascript, extremely lightweight, very fast, soley based on CSS, compatible with FireFox and Chrome. Issues: May have some rendering issues in some versions of IE, sorry :-) Instruments: css file html with specific menu format jQuery-ui library - optional if you want to use your own images/colors Implementation Details: HTML: <div id="header"> <div id="header_Menubar"> <ul class="linkList0 ui-tabs-nav ui-helper-reset ui-helper-clearfix ui-widget-header ui-corner-all"> <li class="first more ui-state-default ui-corner-top ui-tabs-selected"><a title="Home" href="/Home">Home</a> <ul class="linkList01 ui-tabs-nav ui-helper-reset ui-helper-clearfix ui-widget-header ui-corner-all"> <li class="ifirst ui-state-default ui-corner-top"><abbr title="Go Home"></abbr><a title="Home" href="/Home">Home</a></li> </ul> </li> <li class="more ui-state-default ui-corner-top ui-tabs-selected"><a title="Menu 2" href="/Menu2a">Menu 2</a> <ul class="linkList01 ui-tabs-nav ui-helper-reset ui-helper-clearfix ui-widget-header ui-corner-all"> <li class="ifirst ui-state-default ui-corner-top"><abbr title="Menu 2 a"></abbr><a title="Menu 2 a" href="/Menu2a">Menu 2 a</a></li> <li class="ilast ui-state-default ui-corner-top"><abbr title="Menu 2 b"></abbr><a title="Menu 2 b" href="/Menu2b">Menu 2 b</a></li> </ul> </li> <li class="more red ui-state-default ui-corner-top ui-tabs-selected"><a title="Menu 3" href="/Menu3 d">Menu 3</a> <ul class="linkList01 ui-tabs-nav ui-helper-reset ui-helper-clearfix ui-widget-header ui-corner-all"> <li class="ifirst ui-state-default ui-corner-top"><abbr title="Menu 3 a"><a title="Menu 3 a" href="/Menu3a">Menu 3 a</a></abbr></li> <li class="ui-state-default ui-corner-top"><abbr title="Menu 3 b"><a title="Menu 3 b" href="/Menu3b">Menu 3 b</a></abbr></li> <li class="ui-state-default ui-corner-top"><abbr title="Menu 3 c"><a title="Menu 3 c" href="/Menu3c">Menu 3 c</a></abbr></li> <li class="ilast ui-state-default ui-corner-top"><abbr title="Menu 3 d"><a title="Menu 3 d" href="/Menu3d">Menu 3 d</a></abbr></li> </ul> </li> </ul> </div> </div> CSS: /* =Menu ----------------------------------------------------------------------------------------- */ #header #header_Menubar { margin: 0; padding: 0; border: 0; width: 100%; height: 22px; } #header { background-color: #99cccc; background-color: #aaccee; background-color: #5BA3E0; background-color: #006cb1; } /* Set menu bar background color */ #header #header_Menubar { background-attachment: scroll; background-position: left center; background-repeat: repeat-x; } /* Set main (horizontal) menu typology */ #header .linkList0 { padding: 0 0 1em 0; margin-bottom: 1em; font-family: 'Trebuchet MS', 'Lucida Grande', Verdana, Lucida, Geneva, Helvetica, Arial, sans-serif; font-weight: bold; font-size: 1.085em; font-size: 1em; } /* Set all ul properties */ #header .linkList0, #header .linkList0 ul { list-style: none; margin: 0; padding: 0; list-style-position: outside; } /* Set all li properties */ #header .linkList0 > li { float: left; position: relative; font-size: 90%; margin: 0 0 -1px; width: 9.7em; padding-right: 2em; z-index: 100; /*IE7: Fix for IE7 hiding drop down list behind some other page elements */ } /* Set all li properties */ #header .linkList01 > li { width: 190px; } #header .linkList0 .linkList01 li { margin-left: 0px; } /* Set all list background image properties */ /*#header .linkList0 li a { background-position: left center; background-image: url( '../Content/Images/VerticalButtonBarGradientFade.png' ); background-repeat: repeat-x; background-attachment: scroll; }*/ /* Set all A ancor properties */ #header .linkList0 li a { display: block; text-decoration: none; line-height: 22px; } /* IE7: Fix for a bug in IE7 where the margins between list items is doubled - need to set height explicitly */ *+html #header .linkList0 ul li { height: auto; margin-bottom: -.3em; } /* Menu: Set different borders for different nested level lists -------------------------------------------------------------- */ #header .linkList0 > li a { border-left: 10px solid Transparent; border-right: none; } #header .linkList0 > li a { border-left: 0px; margin-left: 0px; border-right: none; } #header .linkList0 .linkList01 > li a { border-left: 8px solid #336699; border-right: none; border: 1px solid Transparent; -moz-border-radius: 5px 5px 5px 5px; -moz-box-shadow: 3px 3px 4px #696969; } #header .linkList0 .linkList01 .linkList001 > li a { border-left: 6px solid #336699; border-right: none; border: 1px solid Transparent; -moz-border-radius: 5px 5px 5px 5px; -moz-box-shadow: 3px 3px 4px #696969; } #header .linkList0 .linkList01 .linkList001 .linkList0001 > li a { border-left: 4px solid #336699; border-right: none; border: 1px solid Transparent; -moz-border-radius: 5px 5px 5px 5px; -moz-box-shadow: 3px 3px 4px #696969; } /* Link and Visited pseudo-class settings for all lists (ul) */ #header .linkList0 a:link, #header .linkList0 a:visited { display: block; text-decoration: none; padding-left: 1em; } /* Hide all the nested/sub menu items */ #header .linkList0 ul { display: none; padding: 0; position: absolute; /*Important: must not impede on other page elements when drop down opens up */ } /* Hide all detail popups */ #header .detailPopup { display: none; } /* Set the typology of all sub-menu list items li */ /*#header .linkList0 ul li { background-color: #AACCEE; background-position: left center; background-image: url( '../Content/Images/VerticalButtonBarGradientFade.png' ); background-repeat: repeat-x; background-attachment: scroll; }*/ #header .linkList0 ul li.more { background: Transparent url('../Content/Images/ArrowRight.gif') no-repeat right center; } /* Header list's margin and padding for all list items */ #header .linkList0 ul li { margin: 0 0 0 1em; padding: 0; } #header .linkList01 ul li { margin: 0; padding: 0; width: 189px; } /* Set margins for the third li sibling (Plan a Call) to display to the right of the parent menu to avoid the sub-menu overlaying the menu items below */ #header .linkList0 li.more .linkList01 li.more > ul.linkList001 { margin: -1.7em 0 0 13.2em; /*Important, must be careful, if tbe EM since gap increases too much bewteen nested lists the gap will make the nested-list collapse prematurely */ } /* Set right hand arrow for list items with sub-menus (class-more) */ #header li.more { background: Transparent url('../Content/Images/ArrowRight.gif') no-repeat right center; padding-right: 48px; } /* Menu: Dynamic Behavior of menu items (hover, visted, etc) ----------------------------------------------------------- */ #header .linkList0 li a:link, #header .linkList01 li a:link { display: block; } #header .linkList0 li a:visited, #header .linkList01 li a:visited { display: block; } #header .linkList0 > li:hover { } #header .linkList01 > li:hover a ,#header .linkList001 > li:hover a { text-decoration: underline; } #header .linkList0 > li abbr:hover span.detailPopup { display: block; position: absolute; top: 1em; left: 17em; border: double 1px #696969; border-style: outset; width: 120%; height: auto; padding: 5px; font-weight: 100; } #header .linkList0 > li:hover ,#header .linkList0 .linkList01 > li:hover { } #header .linkList0 .linkList01 .linkList001 > li:hover { } #header .linkList0 .linkList01 .linkList001 .linkList0001 > li:hover { } /* Display the hidden sub menu when hovering over the parent ul's li */ #header .linkList0 li:hover > ul { display: block; } /* Display the hidden sub menu when hovering over the parent ul's li */ #header .linkList0 .linkList01 li:hover > ul { display: block; background: -moz-linear-gradient(top, #1E83CC, #619FCD); /* Chrome, Safari:*/ background: -webkit-gradient(linear, center top, center bottom, from(#1E83CC), to(#619FCD)); } /* Display the hidden sub menu when hovering over the parent ul's li */ #header .linkList0 .linkList01 .linkList001 li:hover > ul { display: block; } /* Set right hand arrow for list items with sub-menus (class-more) on hover */ #header li.more:hover { } Also some CSS for global settings that will affect this menu, you of course will have some other styling, but included it here so you can see how/why some css properties were set here: /* Neutralize styling: Elements we want to clean out entirely: */ html, body { margin: 0; padding: 0; font: 62.5%/120% Verdana, Arial, Helvetica, sans-serif; } /* Neutralize styling: Elements with a vertical margin: */ h1, h2, h3, h4, h5, h6, p, pre, blockquote, ul, ol, dl, address { margin: 0; /* most browsers set some default value that is not shared by all browsers */ padding: 0; /* some borowsers default padding, set to 0 for all */ } /* Apply left margin: Only to the few elements that need it: */ li, dd, blockquote { margin-left: 1em; }

Read the article

IntelliSense for Razor Hosting in non-Web Applications

- by Rick Strahl

When I posted my Razor Hosting article a couple of weeks ago I got a number of questions on how to get IntelliSense to work inside of Visual Studio while editing your templates. The answer to this question is mainly dependent on how Visual Studio recognizes assemblies, so a little background is required. If you open a template just on its own as a standalone file by clicking on it say in Explorer, Visual Studio will open up with the template in the editor, but you won’t get any IntelliSense on any of your related assemblies that you might be using by default. It’ll give Intellisense on base System namespace, but not on your imported assembly types. This makes sense: Visual Studio has no idea what the assembly associations for the single file are. There are two options available to you to make IntelliSense work for templates: Add the templates as included files to your non-Web project Add a BIN folder to your template’s folder and add all assemblies required there Including Templates in your Host Project By including templates into your Razor hosting project, Visual Studio will pick up the project’s assembly references and make IntelliSense available for any of the custom types in your project and on your templates. To see this work I moved the \Templates folder from the samples from the Debug\Bin folder into the project root and included the templates in the WinForm sample project. Here’s what this looks like in Visual Studio after the templates have been included: Notice that I take my original example and type cast the Context object to the specific type that it actually represents – namely CustomContext – by using a simple code block: @{ CustomContext Model = Context as CustomContext; } After that assignment my Model local variable is in scope and IntelliSense works as expected. Note that you also will need to add any namespaces with the using command in this case: @using RazorHostingWinForm which has to be defined at the very top of a Razor document. BTW, while you can only pass in a single Context 'parameter’ to the template with the default template I’ve provided realize that you can also assign a complex object to Context. For example you could have a container object that references a variety of other objects which you can then cast to the appropriate types as needed: @{ ContextContainer container = Context as ContextContainer; CustomContext Model = container.Model; CustomDAO DAO = container.DAO; } and so forth. IntelliSense for your Custom Template Notice also that you can get IntelliSense for the top level template by specifying an inherits tag at the top of the document: @inherits RazorHosting.RazorTemplateFolderHost By specifying the above you can then get IntelliSense on your base template’s properties. For example, in my base template there are Request and Response objects. This is very useful especially if you end up creating custom templates that include your custom business objects as you can get effectively see full IntelliSense from the ‘page’ level down. For Html Help Builder for example, I’d have a Help object on the page and assuming I have the references available I can see all the way into that Help object without even having to do anything fancy. Note that the @inherits key is a GREAT and easy way to override the base template you normally specify as the default template. It allows you to create a custom template and as long as it inherits from the base template it’ll work properly. Since the last post I’ve also made some changes in the base template that allow hooking up some simple initialization logic so it gets much more easy to create custom templates and hook up custom objects with an IntializeTemplate() hook function that gets called with the Context and a Configuration object. These objects are objects you can pass in at runtime from your host application and then assign to custom properties on your template. For example the default implementation for RazorTemplateFolderHost does this: public override void InitializeTemplate(object context, object configurationData) { // Pick up configuration data and stuff into Request object RazorFolderHostTemplateConfiguration config = configurationData as RazorFolderHostTemplateConfiguration; this.Request.TemplatePath = config.TemplatePath; this.Request.TemplateRelativePath = config.TemplateRelativePath; // Just use the entire ConfigData as the model, but in theory // configData could contain many objects or values to set on // template properties this.Model = config.ConfigData as TModel; } to set up a strongly typed Model and the Request object. You can do much more complex hookups here of course and create complex base template pages that contain all the objects that you need in your code with strong typing. Adding a Bin folder to your Template’s Root Path Including templates in your host project works if you own the project and you’re the only one modifying the templates. However, if you are distributing the Razor engine as a templating/scripting solution as part of your application or development tool the original project is likely not available and so that approach is not practical. Another option you have is to add a Bin folder and add all the related assemblies into it. You can also add a Web.Config file with assembly references for any GAC’d assembly references that need to be associated with the templates. Between the web.config and bin folder Visual Studio can figure out how to provide IntelliSense. The Bin folder should contain: The RazorHosting.dll Your host project’s EXE or DLL – renamed to .dll if it’s an .exe Any external (bin folder) dependent assemblies Note that you most likely also want a reference to the host project if it contains references that are going to be used in templates. Visual Studio doesn’t recognize an EXE reference so you have to rename the EXE to DLL to make it work. Apparently the binary signature of EXE and DLL files are identical and it just works – learn something new everyday… For GAC assembly references you can add a web.config file to your template root. The Web.config file then should contain any full assembly references to GAC components: <configuration> <system.web> <compilation debug="true"> <assemblies> <add assembly="System.Web.Mvc, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <add assembly="System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> <add assembly="System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> </assemblies> </compilation> </system.web> </configuration> And with that you should get full IntelliSense. Note that if you add a BIN folder and you also have the templates in your Visual Studio project Visual Studio will complain about reference conflicts as it’s effectively seeing both the project references and the ones in the bin folder. So it’s probably a good idea to use one or the other but not both at the same time :-) Seeing IntelliSense in your Razor templates is a big help for users of your templates. If you’re shipping an application level scripting solution especially it’ll be real useful for your template consumers/users to be able to get some quick help on creating customized templates – after all that’s what templates are all about – easy customization. Making sure that everything is referenced in your bin folder and web.config is a good idea and it’s great to see that Visual Studio (and presumably WebMatrix/Visual Web Developer as well) will be able to pick up your custom IntelliSense in Razor templates.© Rick Strahl, West Wind Technologies, 2005-2011Posted in Razor

Read the article

Tools of the Trade

- by Ajarn Mark Caldwell

I got pretty excited a couple of days ago when my new laptop arrived. “The new phone books are here! The new phone books are here! I’m a somebody!” - Steve Martin in The Jerk It is a Dell Precision M4500 with an Intel i7 Core 2.8 GHZ running 64-bit Windows 7 with a 15.6” widescreen, 8 GB RAM, 256 GB SSD. For some of you high fliers, this may be nothing to write home about, but compared to the 32–bit Windows XP laptop with 2 GB of RAM and a regular hard disk that I’m coming from, it’s a really nice step forward. I won’t even bore you with the details of the desktop PC I was first given when I started here 5 1/2 years ago. Let’s just say that things have improved. One really nice thing is that while we are definitely running a lean and mean department in terms of staffing, my boss believes in supporting that lean staff with good tools in order to stay lean instead of having to spend even more money on additional employees. Of course, that only goes so far, and at some point you have to add more people in order to get more work done, which is why we are bringing on-board a new employee and a new contract developer next week. But that’s a different story for a different time. But the main topic for this post is to highlight the variety of tools that I use in my job and that you might find useful, too. This is easy to do right now because the process of building up my new laptop from scratch has forced me to assemble a list of software that had to be installed and configured. Keep in mind as you look through this list that I play many roles in our company. My official title is Software Engineering Manager, but in addition to managing the team, I am also an active ASP.NET and SQL developer, the Database Administrator, and 50% of the SAN Administrator team. So, without further ado, here are the tools and some comments about why I use them: Tool Purpose Virtual Clone Drive Easily mount an ISO image as a DVD Drive. This is particularly handy when you are downloading disk images from Microsoft for your tools. SQL Server 2008 R2 Developer Edition We are migrating all of our active systems to SQL 2008 R2. Developer Edition has all the features of Enterprise Edition, but intended for development use. SQL Server 2005 Developer Edition (BIDS ONLY) The migration to SSRS 2008 R2 is just getting started, and in the meantime, maintenance work still has to be done on the reports on our SQL 2005 server. For some reason, you can’t use BIDS from 2008 to write reports for a 2005 server. There is some different format and when you open 2005 reports in 2008 BIDS, it forces you to upgrade, and they can no longer be uploaded to a 2005 server. Hopefully Microsoft will fix this soon in some manner similar to Visual Studio now allows you to pick which version of the .NET Framework you are coding against. Visual Studio 2010 Premium All of our application development is in ASP.NET, and we might as well use the tool designed for it. I’ve used a version of Visual Studio going all the way back to VB 6.0 and Visual Interdev. Vault Professional Client Several years ago we replaced Visual Source Safe with SourceGear Vault (then Fortress, and now Vault Pro), and I love it. It is very reliable with low overhead - perfect for a small to medium size development team. And being a small ISV, their support is exceptional. Red-Gate Developer Bundle with the SQL Source Control update for Vault I first used, and fell in love with, SQL Prompt shortly before Red-Gate bought it, and then Red-Gate’s first release made me love it even more. SQL Refactor (which has since been rolled into the latest version of SQL Prompt) has saved me many hours and migraine’s trying to understand somebody else’s code when their indenting was nonexistant, or worse, irrational. SQL Compare has been awesome for troubleshooting potential schema issues between different instances of system databases. SQL Data Compare helped us identify the cause behind a bug which appeared in PROD but could not be reproduced in a nearly (but not quite exactly) identical copy in UAT. And the newest tool we are embracing: SQL Source Control. I blogged about it here (and here, and here) last December. This is really going to help us keep each developer’s copy of the database in sync with one another. Fiddler Helps you watch the whole traffic stream on web visits. Haven’t used it a lot, but it did help me track down some odd 404 errors we were finding in our own application logs. Has some other JavaScript troubleshooting capabilities, but some of its usefulness has been supplanted by the Developer Tools option in IE8. Funduc Search & Replace Find any string anywhere in a mound of source code really, really fast. Does RegEx searches, if you understand that foreign language. Has really helped with some refactoring work to pinpoint, for example, everywhere a particular stored procedure is referenced, whether in .NET code or other SQL procedures (which we have in script files). Provides in-context preview of the search results. Fantastic tool, and a bargain price. SciTE SciTE is a Scintilla based Text Editor and it is a fantastic, light-weight tool for quickly reviewing (or writing) program code, SQL scripts, and extract files. It has language-specific syntax highlighting. I used it to write several batch and CMD programs a year ago, and to examine data extract files for exchanging information with other systems. Extremely handy are the options to View End of Line and View Whitespace. Ever receive a file that is supposed to use CRLF as an end-of-line marker, but really only has CRs? SciTE will quickly make that visible. Infragistics Controls We do a lot of ASP.NET development, and frequently use the WebGrid, WebTab, and date picker controls. We will likely be implementing the Hierarchical Data Grid soon. Infragistics has control suites for WebForms, WinForms, Silverlight, and coming soon MVC/JQuery. WinZip - WITH Command-Line add-in The classic compression program with a great command-line interface that allows me to build those CMD (and soon PowerShell) programs for automated compression jobs. Our versioned Build packages are zip files. XML Notepad Haven’t used this a lot myself, but one of my team really likes it for examining large XML files. LINQPad Again, haven’t used this one a lot, but it was recommended to me for learning and practicing my LINQ skills which will come in handy as we implement Entity Framework. SQL Sentry Plan Explorer SQL Server Show Plan on steroids. Great for helping you focus on the parts of a large query that are of most importance. Also great for just compressing the graphical plan into more readable layout. Araxis Merge A great DIFF and Merge tool. SourceGear provides a great tool called DiffMerge that we use all the time, but occasionally, I like the cross-edit capabilities of Araxis Merge. For a while, we also produced DIFF reports in HTML that showed all the changes that occurred between two releases. This was most important when we were putting out very small, but very important hot fixes on a very politically hot system. The reports produced by Araxis Merge gave the Director of IS assurance that we were not accidentally introducing ripples throughout the system with our releases. Idera SQL Admin Toolset A great collection of tools including a password checker to help analyze your SQL Server for weak user passwords, a Backup Status tool to quickly scan a large list of servers and databases to identify any that are overdue for backups. Particularly helpful for highlighting new databases that have been deployed without getting included in your backup processing. I also like Space Analyzer to keep an eye on disk space consumed by database files. Idera SQL Job Manager This free tool provides a nice calendar view of SQL Server Job Schedules, but to a degree, you also get what you pay for. We will be purchasing SQL Sentry Event Manager later this year as an even better job schedule reviewer/manager. But in the meantime, this at least gives me a good view on potential resource conflicts across multiple instances of SQL Server. DBFViewer 2000 I inherited a couple of FoxPro databases that I have to keep an eye on occasionally and have not yet been able to migrate them to SQL Server. Balsamiq Mockups We are still in evaluation-mode on this tool, but I really like it as a quick UI mockup tool that does not require Visual Studio, so someone other than a programmer can do UI design. The interface looks hand-drawn which definitely has some psychological benefits when communicating to users, too. FeedDemon I have to stay on top of my WAY TOO MANY blog subscriptions somehow. I may read blogs on a couple of different computers, and FeedDemon’s integration with Google Reader allows me to keep them all in sync. I don’t particularly like the Google Reader interface, or the fact that it always wanted to mark articles as read just because I scrolled past them. FeedDemon solves this problem for me, and provides a multi-tabbed interface which is good because fairly frequently one blog will link to something else I want to read, and I can end up with a half-dozen open tabs all from one article. Synergy+ In my office, I run four monitors across two computers all with one mouse and keyboard. Synergy is the magic software that makes this work. TweetDeck I’m not the most active Tweeter in the world, but when I want to check-in with the Twitterverse, this really helps. I have found the #sqlhelp and #PoshHelp hash tags particularly useful, and I also have columns setup to make it easy to monitor #sqlpass, #PASSProfDev, and short term events like #sqlsat68. Whew! That’s a lot. No wonder it took me a couple of days to get everything setup the way I wanted it. Oh, that and actually getting some work accomplished at the same time. Anyway, I know that is a huge dump of info, and most people never make it here to the end, so for those who did, let me say, CONGRATULATIONS, you made it! I hope you’ll find a new tool or two to make your work life a little easier.

Read the article

Installing nGinX Reverse Proxy on CentOS 5

- by heavymark

I'm trying to install nGinX as a reverse proxy on CentOS 5 with apache. The instructions to do this are here: http://wiki.mediatemple.net/w/(dv):Configure_nginx_as_reverse_proxy_web_server Note- in the instructions, for the url to get nginx I'm using the following: http://nginx.org/download/nginx-1.0.10.tar.gz Now here is my problem. After installing the required packages and running .configure I get the following: checking for OS + Linux 2.6.18-028stab094.3 x86_64 checking for C compiler ... found + using GNU C compiler + gcc version: 4.1.2 20080704 (Red Hat 4.1.2-51) checking for gcc -pipe switch ... found checking for gcc builtin atomic operations ... found checking for C99 variadic macros ... found checking for gcc variadic macros ... found checking for unistd.h ... found checking for inttypes.h ... found checking for limits.h ... found checking for sys/filio.h ... not found checking for sys/param.h ... found checking for sys/mount.h ... found checking for sys/statvfs.h ... found checking for crypt.h ... found checking for Linux specific features checking for epoll ... found checking for sendfile() ... found checking for sendfile64() ... found checking for sys/prctl.h ... found checking for prctl(PR_SET_DUMPABLE) ... found checking for sched_setaffinity() ... found checking for crypt_r() ... found checking for sys/vfs.h ... found checking for nobody group ... found checking for poll() ... found checking for /dev/poll ... not found checking for kqueue ... not found checking for crypt() ... not found checking for crypt() in libcrypt ... found checking for F_READAHEAD ... not found checking for posix_fadvise() ... found checking for O_DIRECT ... found checking for F_NOCACHE ... not found checking for directio() ... not found checking for statfs() ... found checking for statvfs() ... found checking for dlopen() ... not found checking for dlopen() in libdl ... found checking for sched_yield() ... found checking for SO_SETFIB ... not found checking for SO_ACCEPTFILTER ... not found checking for TCP_DEFER_ACCEPT ... found checking for accept4() ... not found checking for int size ... 4 bytes checking for long size ... 8 bytes checking for long long size ... 8 bytes checking for void * size ... 8 bytes checking for uint64_t ... found checking for sig_atomic_t ... found checking for sig_atomic_t size ... 4 bytes checking for socklen_t ... found checking for in_addr_t ... found checking for in_port_t ... found checking for rlim_t ... found checking for uintptr_t ... uintptr_t found checking for system endianess ... little endianess checking for size_t size ... 8 bytes checking for off_t size ... 8 bytes checking for time_t size ... 8 bytes checking for setproctitle() ... not found checking for pread() ... found checking for pwrite() ... found checking for sys_nerr ... found checking for localtime_r() ... found checking for posix_memalign() ... found checking for memalign() ... found checking for mmap(MAP_ANON|MAP_SHARED) ... found checking for mmap("/dev/zero", MAP_SHARED) ... found checking for System V shared memory ... found checking for POSIX semaphores ... not found checking for POSIX semaphores in libpthread ... found checking for struct msghdr.msg_control ... found checking for ioctl(FIONBIO) ... found checking for struct tm.tm_gmtoff ... found checking for struct dirent.d_namlen ... not found checking for struct dirent.d_type ... found checking for PCRE library ... found checking for system md library ... not found checking for system md5 library ... not found checking for OpenSSL md5 crypto library ... found checking for sha1 in system md library ... not found checking for OpenSSL sha1 crypto library ... found checking for zlib library ... found creating objs/Makefile Configuration summary + using system PCRE library + OpenSSL library is not used + md5: using system crypto library + sha1: using system crypto library + using system zlib library nginx path prefix: "/usr/local/nginx" nginx binary file: "/usr/local/nginx/sbin/nginx" nginx configuration prefix: "/usr/local/nginx/conf" nginx configuration file: "/usr/local/nginx/conf/nginx.conf" nginx pid file: "/usr/local/nginx/logs/nginx.pid" nginx error log file: "/usr/local/nginx/logs/error.log" nginx http access log file: "/usr/local/nginx/logs/access.log" nginx http client request body temporary files: "client_body_temp" nginx http proxy temporary files: "proxy_temp" nginx http fastcgi temporary files: "fastcgi_temp" nginx http uwsgi temporary files: "uwsgi_temp" nginx http scgi temporary files: "scgi_temp" It says if you get errors to stop and make sure packages are installed. I didn't get errors but as you can see I got several "not founds". Are those considered errors? If so how do I resolve that. And as noted in the link, I cannot install through yum, because it wont work with plesk then. Thanks!

Read the article

A WPF Image Button

- by psheriff

Instead of a normal button with words, sometimes you want a button that is just graphical. Yes, you can put an Image control in the Content of a normal Button control, but you still have the button outline, and trying to change the style can be rather difficult. Instead I like creating a user control that simulates a button, but just accepts an image. Figure 1 shows an example of three of these custom user controls to represent minimize, maximize and close buttons for a borderless window. Notice the highlighted image button has a gray rectangle around it. You will learn how to highlight using the VisualStateManager in this blog post.Figure 1: Creating a custom user control for things like image buttons gives you complete control over the look and feel.I would suggest you read my previous blog post on creating a custom Button user control as that is a good primer for what I am going to expand upon in this blog post. You can find this blog post at http://weblogs.asp.net/psheriff/archive/2012/08/10/create-your-own-wpf-button-user-controls.aspx.The User ControlThe XAML for this image button user control contains just a few controls, plus a Visual State Manager. The basic outline of the user control is shown below:<Border Grid.Row="0" Name="borMain" Style="{StaticResource pdsaButtonImageBorderStyle}" MouseEnter="borMain_MouseEnter" MouseLeave="borMain_MouseLeave" MouseLeftButtonDown="borMain_MouseLeftButtonDown"> <VisualStateManager.VisualStateGroups> ... MORE XAML HERE ... </VisualStateManager.VisualStateGroups> <Image Style="{StaticResource pdsaButtonImageImageStyle}" Visibility="{Binding Path=Visibility}" Source="{Binding Path=ImageUri}" ToolTip="{Binding Path=ToolTip}" /></Border>There is a Border control named borMain and a single Image control in this user control. That is all that is needed to display the buttons shown in Figure 1. The definition for this user control is in a DLL named PDSA.WPF. The Style definitions for both the Border and the Image controls are contained in a resource dictionary names PDSAButtonStyles.xaml. Using a resource dictionary allows you to create a few different resource dictionaries, each with a different theme for the buttons.The Visual State ManagerTo display the highlight around the button as your mouse moves over the control, you will need to add a Visual State Manager group. Two different states are needed; MouseEnter and MouseLeave. In the MouseEnter you create a ColorAnimation to modify the BorderBrush color of the Border control. You specify the color to animate as “DarkGray”. You set the duration to less than a second. The TargetName of this storyboard is the name of the Border control “borMain” and since we are specifying a single color, you need to set the TargetProperty to “BorderBrush.Color”. You do not need any storyboard for the MouseLeave state. Leaving this VisualState empty tells the Visual State Manager to put everything back the way it was before the MouseEnter event.<VisualStateManager.VisualStateGroups> <VisualStateGroup Name="MouseStates"> <VisualState Name="MouseEnter"> <Storyboard> <ColorAnimation To="DarkGray" Duration="0:0:00.1" Storyboard.TargetName="borMain" Storyboard.TargetProperty="BorderBrush.Color" /> </Storyboard> </VisualState> <VisualState Name="MouseLeave" /> </VisualStateGroup></VisualStateManager.VisualStateGroups>Writing the Mouse EventsTo trigger the Visual State Manager to run its storyboard in response to the specified event, you need to respond to the MouseEnter event on the Border control. In the code behind for this event call the GoToElementState() method of the VisualStateManager class exposed by the user control. To this method you will pass in the target element (“borMain”) and the state (“MouseEnter”). The VisualStateManager will then run the storyboard contained within the defined state in the XAML.private void borMain_MouseEnter(object sender, MouseEventArgs e){ VisualStateManager.GoToElementState(borMain, "MouseEnter", true);}You also need to respond to the MouseLeave event. In this event you call the VisualStateManager as well, but specify “MouseLeave” as the state to go to.private void borMain_MouseLeave(object sender, MouseEventArgs e){ VisualStateManager.GoToElementState(borMain, "MouseLeave", true);}The Resource DictionaryBelow is the definition of the PDSAButtonStyles.xaml resource dictionary file contained in the PDSA.WPF DLL. This dictionary can be used as the default look and feel for any image button control you add to a window. <ResourceDictionary ... >     <Style TargetType="Border" x:Key="pdsaButtonImageBorderStyle"> <Setter Property="Margin" Value="4" /> <Setter Property="Padding" Value="2" /> <Setter Property="BorderBrush" Value="Transparent" /> <Setter Property="BorderThickness" Value="1" /> <Setter Property="VerticalAlignment" Value="Top" /> <Setter Property="HorizontalAlignment" Value="Left" /> <Setter Property="Background" Value="Transparent" /> </Style>  <Style TargetType="Image" x:Key="pdsaButtonImageImageStyle"> <Setter Property="Width" Value="40" /> <Setter Property="Margin" Value="6" /> <Setter Property="VerticalAlignment" Value="Top" /> <Setter Property="HorizontalAlignment" Value="Left" /> </Style></ResourceDictionary>Using the Button ControlOnce you make a reference to the PDSA.WPF DLL from your WPF application you will see the “PDSAucButtonImage” control appear in your Toolbox. Drag and drop the button onto a Window or User Control in your application. I have not referenced the PDSAButtonStyles.xaml file within the control itself so you do need to add a reference to this resource dictionary somewhere in your application such as in the App.xaml.<Application.Resources> <ResourceDictionary> <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="/PDSA.WPF;component/PDSAButtonStyles.xaml" /> </ResourceDictionary.MergedDictionaries> </ResourceDictionary></Application.Resources>This will give your buttons a default look and feel unless you override that dictionary on a specific Window or User Control or on an individual button. After you have given a global style to your application and you drag your image button onto a window, the following will appear in your XAML window.<my:PDSAucButtonImage ... />There will be some other attributes set on the above XAML, but you simply need to set the x:Name, the ToolTip and ImageUri properties. You will also want to respond to the Click event procedure in order to associate an action with clicking on this button. In the sample code you download for this blog post you will find the declaration of the Minimize button to be the following:<my:PDSAucButtonImage x:Name="btnMinimize" Click="btnMinimize_Click" ToolTip="Minimize Application" ImageUri="/PDSA.WPF;component/Images/Minus.png" />The ImageUri property is a dependency property in the PDSAucButtonImage user control. The x:Name and the ToolTip we get for free. You have to create the Click event procedure yourself. This is also created in the PDSAucButtonImage user control as follows:private void borMain_MouseLeftButtonDown(object sender, MouseButtonEventArgs e){ RaiseClick(e);}public delegate void ClickEventHandler(object sender, RoutedEventArgs e);public event ClickEventHandler Click;protected void RaiseClick(RoutedEventArgs e){ if (null != Click) Click(this, e);}Since a Border control does not have a Click event you will create one by using the MouseLeftButtonDown on the border to fire an event you create called “Click”.SummaryCreating your own image button control can be done in a variety of ways. In this blog post I showed you how to create a custom user control and simulate a button using a Border and Image control. With just a little bit of code to respond to the MouseLeftButtonDown event on the border you can raise your own Click event. Dependency properties, such as ImageUri, allow you to set attributes on your custom user control. Feel free to expand on this button by adding additional dependency properties, change the resource dictionary, and even the animation to make this button look and act like you want.NOTE: You can download the sample code for this article by visiting my website at http://www.pdsa.com/downloads. Select “Tips & Tricks”, then select “A WPF Image Button” from the drop down list.

Read the article

CodePlex Daily Summary for Monday, March 29, 2010

CodePlex Daily Summary for Monday, March 29, 2010New ProjectsBUtil: Backup toolcfDateTime: A library for conveniant dealing with date and time in code and UI.ComplexNetwork: Complex network is a network (graph) with non-trivial topological features—features that do not occur in simple networks such as lattices or random...Crash, Burn, Learn AI: Crash, Burn, Learn AI is a "social" AI that tries to learn a language. You provide it with words and it tries to speak.DashboardNET: Student project for Database Applications classDawf: Dual Audio Workflow: Dawf (Dual Audio Workflow) is a script for Sony Vegas Pro and PluralEyes. First, use PluralEyes to sync good audio from an external recorder (for ...EFDataPager: The EFDataPager is an Web User Control that provides Entity Framework data paging. This control enables your ListView, Datagrid or other data pres...GALOAP: GALOAP is a web framework for developing games with a purpose (or GWAP). A GWAP is a game played on a computer that serves some purpose for the peo...Modular CSharp Web Server: The Modular CSharp Web Server Is a small web server core that modules can be build to expand it.NHibernate Membership Provider: The NHMemberProvider is a complete .Net Membership Provider developed in C# and utilizing NHibernate for data persistence. NTP-VoIP Chat: NTP-VoIP chat is a sample VoIP based chat client (and server) developed for academic purposes at the Faculty of Electrical Engineering in Sarajevo....SharePoint Labs: SPLabs is a set of labs, either VB.NET or C#, focused on SharePoint technologies. Each lab is in itself a tutorial to learn a specific area of Shar...SharePoint Navigation Menu: Have a Web App with multiple site collections and need a common navigation menu? How about a SP Web Part that gives a consistent, easy to use, cen...Smebedor — greatest e-shop in the world: Smebedor - greatest e-shop in the worldStarksoft FTP and FTPS C# Client Library: Free, open source and easy to use .NET 2.0+ / Mono 2.x Component for connecting to FTP servers. Explicit and implicit SSL and TLS connections, dat...Sweet Office: The so Sweet Office built on the so sweet Silverlight.World Map WebPart: Display a world map and points several locations configured in the web part properties. The map is based on Google Maps and Live Maps.New ReleasesActivate Your Glutes: v1.0.2.0: An admin section has been added to the site and the log4net framework has been integrated. Minor tweak to registration to present a better date pic...ArkSwitch: ArkSwitch v1.1.4: Bugfix release, mainly for the new process mode.BatterySaver: Version 0.3: ChangeLog Add support for power change events in standby/hibernate (Issue) Add support for multiple configuration profiles (Issue) Added XSD for co...BUtil: BUtil 4.7: The initial releasecfDateTime: cfDateTime 0.1.1.3: This is the first public release of cfDateTime. Supported Features are: Base-implementation of the DateTimeSpan-type which is the logic-holder Im...Crash, Burn, Learn AI: Crash, Burn, Learn v0.1 Alpha: The first version of the AI. Got basic functionality but not everything works as it should so you're very welcome to test :)CycleMania Starter Kit EAP - ASP.NET 4 Problem - Design - Solution: Cyclemania 0.08.43: See Source Code tab for recent change history.Dawf: Dual Audio Workflow: Beta: Beta for DawfeCommerce by Onex Community Edition: Installer of eCommerce by Onex Community 1.0: Installer of eCommerce by Onex Community 1.0 Last changes: Added integration with Paypal Corrected of adding photos and attachments to products ...Encrypted Notes: Encrypted Notes 1.6.1: This is the latest version of Encrypted Notes (1.6.1), with bug fixes (mainly One-Time Pad). It has an installer - it will create a directory 'CPas...ExtAspNet: ExtAspNet v2.2.1: ExtAspNet v2.2.1 ExtAspNet is a set of professional Asp.net controls with native AJAX support and rich UI effect which aim at No JavaScript, No C...Load Test User Mock Toolkits: Open.LoadTest.User.Mock.Toolkits 1.0: 此版本为非正式版本，未对性能方面进行优化。而且框架正在重构调整中。miniTodo: mini Todo version 0.1: 超簡易TodoアプリMsmqJava: MsmqJava v1.2: MsmqJava v1.2 is an update of the Java/JNI wrapper for MSMQ. It is currently at v1.2.1.2. Last updated 28 March 2010. This version includes: ...N2 CMS: 2.0 beta2: Major Changes 2.0b-2.0b2 bugfixes prettified home interface analytics part icons for file types Major Changes 1.5-2.0b ASP.NET MVC 2 templat...New York Times Silverlight Kit: Version 1.0 for Windows Phone 7 Series: New York Times Silverlight Kit for Windows Phone 7 Series Release NotesDoes not include Articles or TimesTag APIsNHibernate Membership Provider: NHibernate Membership Provider 0.9b: This is the initial source code release of NHibernateProvider. I'm putting this up in beta for now, although it is currently being used in one of ...PowerShell ISE-Cream: PSISECream 0.1: So far, you must have downloaded the source code from this project and used the individual modules or scripts for different ISE addons. This projec...Prolog.NET: Prolog.NET 1.0 Beta 2: Installer includes: primary Prolog.NET assembly Prolog.NET Workbench Prolog.NET Scheduler sample application PrologTest console applicati...QuickStart Engine (3D Game Engine for XNA): QuickStart Engine v0.21: Main FeaturesClean engine architecture Makes it easy to make your own game using the engine. Messaging system allows you to communicate between s...S3Appender (Appender for Log4Net that Uses Amazon S3 For Storing Log Files): Stable Release 0.5: Download directly from source code http://s3appender.codeplex.com/SourceControl/changeset/view/43435SharePoint Labs: SPLab5001A-FRA-Level100: SPLab5001A-FRA-Level100 This SharePoint Lab will teach you how to increase your knowledge and use of CAML within Visual Studio. Lab Language : Fren...SharePoint Navigation Menu: spNavigationMenu 1.0: Inital release.Sweet Office: Simple drawing 0.0.1: A Visio-like simple drawing tool was built. Sweet Office is a Office-like tool set running on Silverlight.Switch Checker: v1.0.0.4 - Improved functionality: Added features: Add edit and delete options to right click switch list. Allow delete multiple switches from edit switches form. Allow copy MAC ...System.Common: System.Common Library: First release of System.Common.dlTeam 12 - Team FTW - Software Project: Quadrisauce Alpha Release: This is the first release of Quadrisauce!Visual Studio DSite: Math Wiz Quiz (Visual Basic 2008): A simple math quiz program, that test your knowledge of addition, subtraction and multiplication. This quiz is aimed for elementary kids, but you ...World Map WebPart: World Map Web Part v1.0: Display a world map and points several locations configured in the web part properties. The web part is using either Google Maps or Live Maps depen...WPF Dialogs: Version 0.2.0: 4 New Dialogs: NewFolderDialog / NewFolderDialog - Deutsch DeleteDialog / DeleteDialog - Deutsch] SaveDialog / SaveDialog- Deutsch RenamerDia...WPF Dialogs: Version 0.2.0 for .Net 3.5: The same new features like in the .Net 4 version Version 0.2.0ニコ生タイピング: Niconama Typing Ver. 10-03-28: ランキング同順位の表示方法を変更ランキング表示にスクロールバーを追加切断ボタンを追加スピードを5倍まで選択できるように変更ニコ生の仕様変更に対応（運営コメント）デバッグ部分UI変更 NGワードを含む名前は登録できないように変更（含む場合、「名無し（NGコメ）...Most Popular ProjectsRawrWBFS ManagerASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrjQuery Library for SharePoint Web ServicesManaged Extensibility FrameworkLINQ to TwitterMicrosoft Biology FoundationBlogEngine.NETpatterns & practices: Composite WPF and SilverlightFarseer Physics EngineTable2ClassNB_Store - Free DotNetNuke Ecommerce Catalog Module

Read the article

European Interoperability Framework - a new beginning?

- by trond-arne.undheim

The most controversial document in the history of the European Commission's IT policy is out. EIF is here, wrapped in the Communication "Towards interoperability for European public services", and including the new feature European Interoperability Strategy (EIS), arguably a higher strategic take on the same topic. Leaving EIS aside for a moment, the EIF controversy has been around IPR, defining open standards and about the proper terminology around standardization deliverables. Today, as the document finally emerges, what is the verdict? First of all, to be fair to those among you who do not spend your lives in the intricate labyrinths of Commission IT policy documents on interoperability, let's define what we are talking about. According to the Communication: "An interoperability framework is an agreed approach to interoperability for organisations that want to collaborate to provide joint delivery of public services. Within its scope of applicability, it specifies common elements such as vocabulary, concepts, principles, policies, guidelines, recommendations, standards, specifications and practices." The Good - EIF reconfirms that "The Digital Agenda can only take off if interoperability based on standards and open platforms is ensured" and also confirms that "The positive effect of open specifications is also demonstrated by the Internet ecosystem." - EIF takes a productive and pragmatic stance on openness: "In the context of the EIF, openness is the willingness of persons, organisations or other members of a community of interest to share knowledge and stimulate debate within that community, the ultimate goal being to advance knowledge and the use of this knowledge to solve problems" (p.11). "If the openness principle is applied in full: - All stakeholders have the same possibility of contributing to the development of the specification and public review is part of the decision-making process; - The specification is available for everybody to study; - Intellectual property rights related to the specification are licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software" (p. 26). - EIF is a formal Commission document. The former EIF 1.0 was a semi-formal deliverable from the PEGSCO, a working group of Member State representatives. - EIF tackles interoperability head-on and takes a clear stance: "Recommendation 22. When establishing European public services, public administrations should prefer open specifications, taking due account of the coverage of functional needs, maturity and market support." - The Commission will continue to support the National Interoperability Framework Observatory (NIFO), reconfirming the importance of coordinating such approaches across borders. - The Commission will align its internal interoperability strategy with the EIS through the eCommission initiative. - One cannot stress the importance of using open standards enough, whether in the context of open source or non-open source software. The EIF seems to have picked up on this fact: What does the EIF says about the relation between open specifications and open source software? The EIF introduces, as one of the characteristics of an open specification, the requirement that IPRs related to the specification have to be licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software. In this way, companies working under various business models can compete on an equal footing when providing solutions to public administrations while administrations that implement the standard in their own software (software that they own) can share such software with others under an open source licence if they so decide. - EIF is now among the center pieces of the Digital Agenda (even though this demands extensive inter-agency coordination in the Commission): "The EIS and the EIF will be maintained under the ISA Programme and kept in line with the results of other relevant Digital Agenda actions on interoperability and standards such as the ones on the reform of rules on implementation of ICT standards in Europe to allow use of certain ICT fora and consortia standards, on issuing guidelines on essential intellectual property rights and licensing conditions in standard-setting, including for ex-ante disclosure, and on providing guidance on the link between ICT standardisation and public procurement to help public authorities to use standards to promote efficiency and reduce lock-in.(Communication, p.7)" All in all, quite a few good things have happened to the document in the two years it has been on the shelf or was being re-written, depending on your perspective, in any case, awaiting the storms to calm. The Bad - While a certain pragmatism is required, and governments cannot migrate to full openness overnight, EIF gives a bit too much room for governments not to apply the openness principle in full. Plenty of reasons are given, which should maybe have been put as challenges to be overcome: "However, public administrations may decide to use less open specifications, if open specifications do not exist or do not meet functional interoperability needs. In all cases, specifications should be mature and sufficiently supported by the market, except if used in the context of creating innovative solutions". - EIF does not use the internationally established terminology: open standards. Rather, the EIF introduces the notion of "formalised specification". How do "formalised specifications" relate to "standards"? According to the FAQ provided: The word "standard" has a specific meaning in Europe as defined by Directive 98/34/EC. Only technical specifications approved by a recognised standardisation body can be called a standard. Many ICT systems rely on the use of specifications developed by other organisations such as a forum or consortium. The EIF introduces the notion of "formalised specification", which is either a standard pursuant to Directive 98/34/EC or a specification established by ICT fora and consortia. The term "open specification" used in the EIF, on the one hand, avoids terminological confusion with the Directive and, on the other, states the main features that comply with the basic principle of openness laid down in the EIF for European Public Services. Well, this may be somewhat true, but in reality, Europe is 30 year behind in terminology. Unless the European Standardization Reform gets completed in the next few months, most Member States will likely conclude that they will go on referencing and using standards beyond those created by the three European endorsed monopolists of standardization, CEN, CENELEC and ETSI. Who can afford to begin following the strict Brussels rules for what they can call open standards when, in reality, standards stemming from global standardization organizations, so-called fora/consortia, dominate in the IT industry. What exactly is EIF saying? Does it encourage Member States to go on using non-ESO standards as long as they call it something else? I guess I am all for it, although it is a bit cumbersome, no? Why was there so much interest around the EIF? The FAQ attempts to explain: Some Member States have begun to adopt policies to achieve interoperability for their public services. These actions have had a significant impact on the ecosystem built around the provision of such services, e.g. providers of ICT goods and services, standardisation bodies, industry fora and consortia, etc... The Commission identified a clear need for action at European level to ensure that actions by individual Member States would not create new electronic barriers that would hinder the development of interoperable European public services. As a result, all stakeholders involved in the delivery of electronic public services in Europe have expressed their opinions on how to increase interoperability for public services provided by the different public administrations in Europe. Well, it does not take two years to read 50 consultation documents, and the EU Standardization Reform is not yet completed, so, more pragmatically, you finally had to release the document. Ok, let's leave some of that aside because the document is out and some people are happy (and others definitely not). The Verdict Considering the controversy, the delays, the lobbying, and the interests at stake both in the EU, in Member States and among vendors large and small, this document is pretty impressive. As with a good wine that has not yet come to full maturity, let's say that it seems to be coming in in the 85-88/100 range, but only a more fine-grained analysis, enjoyment in good company, and ultimately, implementation, will tell. The European Commission has today adopted a significant interoperability initiative to encourage public administrations across the EU to maximise the social and economic potential of information and communication technologies. Today, we should rally around this achievement. Tomorrow, let's sit down and figure out what it means for the future.

Read the article

My Code Kata–A Solution Kata

- by Glav

There are many developers and coders out there who like to do code Kata’s to keep their coding ability up to scratch and to practice their skills. I think it is a good idea. While I like the concept, I find them dead boring and of minimal purpose. Yes, they serve to hone your skills but that’s about it. They are often quite abstract, in that they usually focus on a small problem set requiring specific solutions. It is fair enough as that is how they are designed but again, I find them quite boring. What I personally like to do is go for something a little larger and a little more fun. It takes a little more time and is not as easily executed as a kata though, but it services the same purposes from a practice perspective and allows me to continue to solve some problems that are not directly part of the initial goal. This means I can cover a broader learning range and have a bit more fun. If I am lucky, sometimes they even end up being useful tools. With that in mind, I thought I’d share my current ‘kata’. It is not really a code kata as it is too big. I prefer to think of it as a ‘solution kata’. The code is on bitbucket here. What I wanted to do was create a kind of simplistic virtual world where I can create a player, or a class, stuff it into the world, and see if it survives, and can navigate its way to the exit. Requirements were pretty simple: Must be able to define a map to describe the world using simple X,Y co-ordinates. Z co-ordinates as well if you feel like getting clever. Should have the concept of entrances, exists, solid blocks, and potentially other materials (again if you want to get clever). A coder should be able to easily write a class which will act as an inhabitant of the world. An inhabitant will receive stimulus from the world in the form of surrounding environment and be able to make a decision on action which it passes back to the ‘world’ for processing. At a minimum, an inhabitant will have sight and speed characteristics which determine how far they can ‘see’ in the world, and how fast they can move. Coders who write a really bad ‘inhabitant’ should not adversely affect the rest of world. Should allow multiple inhabitants in the world. So that was the solution I set out to act as a practice solution and a little bit of fun. It had some interesting problems to solve and I figured, if it turned out ok, I could potentially use this as a ‘developer test’ for interviews. Ask a potential coder to write a class for an inhabitant. Show the coder the map they will navigate, but also mention that we will use their code to navigate a map they have not yet seen and a little more complex. I have been playing with solution for a short time now and have it working in basic concepts. Below is a screen shot using a very basic console visualiser that shows the map, boundaries, blocks, entrance, exit and players/inhabitants. The yellow asterisks ‘*’ are the players, green ‘O’ the entrance, purple ‘^’ the exit, maroon/browny ‘#’ are solid blocks. The players can move around at different speeds, knock into each others, and make directional movement decisions based on what they see and who is around them. It has been quite fun to write and it is also quite fun to develop different players to inject into the world. The code below shows a really simple implementation of an inhabitant that can work out what to do based on stimulus from the world. It is pretty simple and just tries to move in some direction if there is nothing blocking the path. public class TestPlayer:LivingEntity { public TestPlayer() { Name = "Beta Boy"; LifeKey = Guid.NewGuid(); } public override ActionResult DecideActionToPerform(EcoDev.Core.Common.Actions.ActionContext actionContext) { try { var action = new MovementAction(); // move forward if we can if (actionContext.Position.ForwardFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.ForwardFacingPositions[0])) { action.DirectionToMove = MovementDirection.Forward; return action; } } if (actionContext.Position.LeftFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.LeftFacingPositions[0])) { action.DirectionToMove = MovementDirection.Left; return action; } } if (actionContext.Position.RearFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.RearFacingPositions[0])) { action.DirectionToMove = MovementDirection.Back; return action; } } if (actionContext.Position.RightFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.RightFacingPositions[0])) { action.DirectionToMove = MovementDirection.Right; return action; } } return action; } catch (Exception ex) { World.WriteDebugInformation("Player: "+ Name, string.Format("Player Generated exception: {0}",ex.Message)); throw ex; } } private bool CheckAccessibilityOfMapBlock(MapBlock block) { if (block == null || block.Accessibility == MapBlockAccessibility.AllowEntry || block.Accessibility == MapBlockAccessibility.AllowExit || block.Accessibility == MapBlockAccessibility.AllowPotentialEntry) { return true; } return false; } } It is simple and it seems to work well. The world implementation itself decides the stimulus context that is passed to he inhabitant to make an action decision. All movement is carried out on separate threads and timed appropriately to be as fair as possible and to cater for additional skills such as speed, and eventually maybe stamina, strength, with actions like fighting. It is pretty fun to make up random maps and see how your inhabitant does. You can download the code from here. Along the way I have played with parallel extensions to make the compute intensive stuff spread across all cores, had to heavily factor in visibility of methods and properties so design of classes was paramount, work out movement algorithms that play fairly in the world and properly favour the players with higher abilities, as well as a host of other issues. So that is my ‘solution kata’. If I keep going with it, I may develop a web interface for it where people can upload assemblies and watch their player within a web browser visualiser and maybe even a map designer. What do you do to keep the fires burning?

Read the article

Java Cloud Service Integration using Web Service Data Control

- by Jani Rautiainen

Java Cloud Service (JCS) provides a platform to develop and deploy business applications in the cloud. In Fusion Applications Cloud deployments customers do not have the option to deploy custom applications developed with JDeveloper to ensure the integrity and supportability of the hosted application service. Instead the custom applications can be deployed to the JCS and integrated to the Fusion Application Cloud instance.This series of articles will go through the features of JCS, provide end-to-end examples on how to develop and deploy applications on JCS and how to integrate them with the Fusion Applications instance.In this article a custom application integrating with Fusion Application using Web Service Data Control will be implemented. v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} Pre-requisites Access to Cloud instance In order to deploy the application access to a JCS instance is needed, a free trial JCS instance can be obtained from Oracle Cloud site. To register you will need a credit card even if the credit card will not be charged. To register simply click "Try it" and choose the "Java" option. The confirmation email will contain the connection details. See this video for example of the registration. Once the request is processed you will be assigned 2 service instances; Java and Database. Applications deployed to the JCS must use Oracle Database Cloud Service as their underlying database. So when JCS instance is created a database instance is associated with it using a JDBC data source. The cloud services can be monitored and managed through the web UI. For details refer to Getting Started with Oracle Cloud. JDeveloper JDeveloper contains Cloud specific features related to e.g. connection and deployment. To use these features download the JDeveloper from JDeveloper download site by clicking the “Download JDeveloper 11.1.1.7.1 for ADF deployment on Oracle Cloud” link, this version of JDeveloper will have the JCS integration features that will be used in this article. For versions that do not include the Cloud integration features the Oracle Java Cloud Service SDK or the JCS Java Console can be used for deployment. For details on installing and configuring the JDeveloper refer to the installation guide. For details on SDK refer to Using the Command-Line Interface to Monitor Oracle Java Cloud Service and Using the Command-Line Interface to Manage Oracle Java Cloud Service. Create Application In this example the “JcsWsDemo” application created in the “Java Cloud Service Integration using Web Service Proxy” article is used as the base. Create Web Service Data Control In this example we will use a Web Service Data Control to integrate with Credit Rule Service in Fusion Applications. The data control will be used to query data from Fusion Applications using a web service call and present the data in a table. To generate the data control choose the “Model” project and navigate to "New -> All Technologies -> Business Tier -> Data Controls -> Web Service Data Control" and enter following: Name: CreditRuleServiceDC URL: https://ic-[POD].oracleoutsourcing.com/icCnSetupCreditRulesPublicService/CreditRuleService?WSDL Service: {{http://xmlns.oracle.com/apps/incentiveCompensation/cn/creditSetup/creditRule/creditRuleService/}CreditRuleService On step 2 select the “findRule” operation: Skip step 3 and on step 4 define the credentials to access the service. Do note that in this example these credentials are only used if testing locally, for JCS deployment credentials need to be manually updated on the EAR file: Click “Finish” and the proxy generation is done. Creating UI In order to use the data control we will need to populate complex objects FindCriteria and FindControl. For simplicity in this example we will create logic in a managed bean that populates the objects. Open “JcsWsDemoBean.java” and add the following logic: Map findCriteria; Map findControl; public void setFindCriteria(Map findCriteria) { this.findCriteria = findCriteria; } public Map getFindCriteria() { findCriteria = new HashMap(); findCriteria.put("fetchSize",10); findCriteria.put("fetchStart",0); return findCriteria; } public void setFindControl(Map findControl) { this.findControl = findControl; } public Map getFindControl() { findControl = new HashMap(); return findControl; } Open “JcsWsDemo.jspx”, navigate to “Data Controls -> CreditRuleServiceDC -> findRule(Object, Object) -> result” and drag and drop the “result” node into the “af:form” element in the page: On the “Edit Table Columns” remove all columns except “RuleId” and “Name”: On the “Edit Action Binding” window displayed enter reference to the java class created above by selecting “#{JcsWsDemoBean.findCriteria}”: Also define the value for the “findControl” by selecting “#{JcsWsDemoBean.findControl}”. Deploy to JCS For WS DC the authentication details need to be updated on the connection details before deploying. Open “connections.xml” by navigating “Application Resources -> Descriptors -> ADF META-INF -> connections.xml”: Change the user name and password entry from: <soap username="transportUserName" password="transportPassword" To match the access details for the target environment. Follow the same steps as documented in previous article ”Java Cloud Service ADF Web Application”. Once deployed the application can be accessed with URL: https://java-[identity domain].java.[data center].oraclecloudapps.com/JcsWsDemo-ViewController-context-root/faces/JcsWsDemo.jspx When accessed the first 10 rules in the system are displayed: Summary In this article we learned how to integrate with Fusion Applications using a Web Service Data Control in JCS. In future articles various other integration techniques will be covered. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";}

Read the article

Improving Manageability of Virtual Environments

- by Jeff Victor

Boot Environments for Solaris 10 Branded Zones Until recently, Solaris 10 Branded Zones on Solaris 11 suffered one notable regression: Live Upgrade did not work. The individual packaging and patching tools work correctly, but the ability to upgrade Solaris while the production workload continued running did not exist. A recent Solaris 11 SRU (Solaris 11.1 SRU 6.4) restored most of that functionality, although with a slightly different concept, different commands, and without all of the feature details. This new method gives you the ability to create and manage multiple boot environments (BEs) for a Solaris 10 Branded Zone, and modify the active or any inactive BE, and to do so while the production workload continues to run. Background In case you are new to Solaris: Solaris includes a set of features that enables you to create a bootable Solaris image, called a Boot Environment (BE). This newly created image can be modified while the original BE is still running your workload(s). There are many benefits, including improved uptime and the ability to reboot into (or downgrade to) an older BE if a newer one has a problem. In Solaris 10 this set of features was named Live Upgrade. Solaris 11 applies the same basic concepts to the new packaging system (IPS) but there isn't a specific name for the feature set. The features are simply part of IPS. Solaris 11 Boot Environments are not discussed in this blog entry. Although a Solaris 10 system can have multiple BEs, until recently a Solaris 10 Branded Zone (BZ) in a Solaris 11 system did not have this ability. This limitation was addressed recently, and that enhancement is the subject of this blog entry. This new implementation uses two concepts. The first is the use of a ZFS clone for each BE. This makes it very easy to create a BE, or many BEs. This is a distinct advantage over the Live Upgrade feature set in Solaris 10, which had a practical limitation of two BEs on a system, when using UFS. The second new concept is a very simple mechanism to indicate the BE that should be booted: a ZFS property. The new ZFS property is named com.oracle.zones.solaris10:activebe (isn't that creative? ). It's important to note that the property is inherited from the original BE's file system to any BEs you create. In other words, all BEs in one zone have the same value for that property. When the (Solaris 11) global zone boots the Solaris 10 BZ, it boots the BE that has the name that is stored in the activebe property. Here is a quick summary of the actions you can use to manage these BEs: To create a BE: Create a ZFS clone of the zone's root dataset To activate a BE: Set the ZFS property of the root dataset to indicate the BE To add a package or patch to an inactive BE: Mount the inactive BE Add packages or patches to it Unmount the inactive BE To list the available BEs: Use the "zfs list" command. To destroy a BE: Use the "zfs destroy" command. Preparation Before you can use the new features, you will need a Solaris 10 BZ on a Solaris 11 system. You can use these three steps - on a real Solaris 11.1 server or in a VirtualBox guest running Solaris 11.1 - to create a Solaris 10 BZ. The Solaris 11.1 environment must be at SRU 6.4 or newer. Create a flash archive on the Solaris 10 system s10# flarcreate -n s10-system /net/zones/archives/s10-system.flar Configure the Solaris 10 BZ on the Solaris 11 system s11# zonecfg -z s10z Use 'create' to begin configuring a new zone. zonecfg:s10z create -t SYSsolaris10 zonecfg:s10z set zonepath=/zones/s10z zonecfg:s10z exit s11# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - s10z configured /zones/s10z solaris10 excl Install the zone from the flash archive s11# zoneadm -z s10z install -a /net/zones/archives/s10-system.flar -p You can find more information about the migration of Solaris 10 environments to Solaris 10 Branded Zones in the documentation. The rest of this blog entry demonstrates the commands you can use to accomplish the aforementioned actions related to BEs. New features in action Note that the demonstration of the commands occurs in the Solaris 10 BZ, as indicated by the shell prompt "s10z# ". Many of these commands can be performed in the global zone instead, if you prefer. If you perform them in the global zone, you must change the ZFS file system names. Create The only complicated action is the creation of a BE. In the Solaris 10 BZ, create a new "boot environment" - a ZFS clone. You can assign any name to the final portion of the clone's name, as long as it meets the requirements for a ZFS file system name. s10z# zfs snapshot rpool/ROOT/zbe-0@snap s10z# zfs clone -o mountpoint=/ -o canmount=noauto rpool/ROOT/zbe-0@snap rpool/ROOT/newBE cannot mount 'rpool/ROOT/newBE' on '/': directory is not empty filesystem successfully created, but not mounted You can safely ignore that message: we already know that / is not empty! We have merely told ZFS that the default mountpoint for the clone is the root directory. List the available BEs and active BE Because each BE is represented by a clone of the rpool/ROOT dataset, listing the BEs is as simple as listing the clones. s10z# zfs list -r rpool/ROOT NAME USED AVAIL REFER MOUNTPOINT rpool/ROOT 3.55G 42.9G 31K legacy rpool/ROOT/zbe-0 1K 42.9G 3.55G / rpool/ROOT/newBE 3.55G 42.9G 3.55G / The output shows that two BEs exist. Their names are "zbe-0" and "newBE". You can tell Solaris that one particular BE should be used when the zone next boots by using a ZFS property. Its name is com.oracle.zones.solaris10:activebe. The value of that property is the name of the clone that contains the BE that should be booted. s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT NAME PROPERTY VALUE SOURCE rpool/ROOT com.oracle.zones.solaris10:activebe zbe-0 local Change the active BE When you want to change the BE that will be booted next time, you can just change the activebe property on the rpool/ROOT dataset. s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT NAME PROPERTY VALUE SOURCE rpool/ROOT com.oracle.zones.solaris10:activebe zbe-0 local s10z# zfs set com.oracle.zones.solaris10:activebe=newBE rpool/ROOT s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT NAME PROPERTY VALUE SOURCE rpool/ROOT com.oracle.zones.solaris10:activebe newBE local s10z# shutdown -y -g0 -i6 After the zone has rebooted: s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT rpool/ROOT com.oracle.zones.solaris10:activebe newBE local s10z# zfs mount rpool/ROOT/newBE / rpool/export /export rpool/export/home /export/home rpool /rpool Mount the original BE to see that it's still there. s10z# zfs mount -o mountpoint=/mnt rpool/ROOT/zbe-0 s10z# ls /mnt Desktop export platform Documents export.backup.20130607T214951Z proc S10Flar home rpool TT_DB kernel sbin bin lib system boot lost+found tmp cdrom mnt usr dev net var etc opt Patch an inactive BE At this point, you can modify the original BE. If you would prefer to modify the new BE, you can restore the original value to the activebe property and reboot, and then mount the new BE to /mnt (or another empty directory) and modify it. Let's mount the original BE so we can modify it. (The first command is only needed if you haven't already mounted that BE.) s10z# zfs mount -o mountpoint=/mnt rpool/ROOT/zbe-0 s10z# patchadd -R /mnt -M /var/sadm/spool 104945-02 Note that the typical usage will be: Create a BE Mount the new (inactive) BE Use the package and patch tools to update the new BE Unmount the new BE Reboot Delete an inactive BE ZFS clones are children of their parent file systems. In order to destroy the parent, you must first "promote" the child. This reverses the parent-child relationship. (For more information on this, see the documentation.) The original rpool/ROOT file system is the parent of the clones that you create as BEs. In order to destroy an earlier BE that is that parent of other BEs, you must first promote one of the child BEs to be the ZFS parent. Only then can you destroy the original BE. Fortunately, this is easier to do than to explain: s10z# zfs promote rpool/ROOT/newBE s10z# zfs destroy rpool/ROOT/zbe-0 s10z# zfs list -r rpool/ROOT NAME USED AVAIL REFER MOUNTPOINT rpool/ROOT 3.56G 269G 31K legacy rpool/ROOT/newBE 3.56G 269G 3.55G / Documentation This feature is so new, it is not yet described in the Solaris 11 documentation. However, MOS note 1558773.1 offers some details. Conclusion With this new feature, you can add and patch packages to boot environments of a Solaris 10 Branded Zone. This ability improves the manageability of these zones, and makes their use more practical. It also means that you can use the existing P2V tools with earlier Solaris 10 updates, and modify the environments after they become Solaris 10 Branded Zones.

Read the article

Beginner Geek: How to Use Bookmarklets on Any Device

- by Chris Hoffman

Web browser bookmarklets allow you to perform actions on the current page with just a click or tap. They’re a lightweight alternative to browser extensions. They even work on mobile browsers that don’t support traditional extensions. To use bookmarklets, all you need is a web browser that supports bookmarks — that’s it! Bookmarklets Explained Web pages you view in your browser use JavaScript code. That’s why web pages aren’t just static documents anymore — they’re dynamic. A bookmarklet is a normal bookmark with a piece of JavaScript code instead of a web address. When you click or tap the bookmarklet, it will execute the JavaScript code on the current page instead of loading a different page, as most bookmarks do. Bookmarklets can be used to do something to a web page with a single click. For example, you’ll find bookmarklets associated with web services like Twitter, Facebook, Google+, LinkedIn, Pocket, and LastPass. When you click the bookmarklet, it will run code that lets you easily share the current page with that service. Bookmarklets don’t just have to be associated with web services. A bookmarklet you click could modify the appearance of the page, stripping away most of the junk and giving you a clean “reading mode.” It could alter fonts, remove images, or insert other content. It can access anything the web page could access. For example, you could use a bookmarklet to reveal a password that just appears as ******* on the page. Unlike browser extensions, bookmarklets don’t run in the background and bog down your browser. They don’t do anything at all until you click them. Because they just use the standard bookmark system, they can also be used in mobile browsers where you couldn’t run extensions. For example, you could install the Pocket bookmarklet in Safari on an iPad and get an “Add to Pocket” option in Safari. Safari doesn’t offer browsing extensions and Apple’s iOS doesn’t offer a “Share” feature like Android and Windows 8 do, so this is the only way to get this direct integration. You could even use the LastPass bookmarklets in Safari on an iPad to integrate LastPass with the Safari web browser. Where to Find Bookmarklets If you’re looking for a bookmarklet for a particular service, you’ll generally find the bookmarklet on that service’s site. Websites like Twitter, Facebook, and Pocket host pages where they provide bookmarklets along with browser extensions. Bookmarklets aren’t like programs. They’re really just a piece of text that you can put in a bookmarklet, so you don’t have to download them a specific site. You can get them from practically anywhere — installing them just involves copying a bit of text off of a web page. For example, you can just search the web for “reveal password bookmarklet” if you wanted a bookmarklet that will reveal passwords. We’ve covered many of the must-have bookmarklets — and our readers have chimed in too — so take a look at our lists for more examples. How to Install a Bookmarklet Bookmarklets are simple to install. When you hover over a bookmarklet on a web page, you’ll see its address begins with “javascript:”. If you have your web browser’s bookmark or favorites toolbar visible, the easiest way to install a bookmarklet is with drag-and-drop. Press Ctrl+Shift+B to show your bookmarks toolbar if you’re using Chrome or Internet Explorer. In Firefox, right-click the toolbar and click Bookmarks Toolbar. Just drag and drop this link to your bookmark toolbar. The bookmarklet is now installed. You can also install bookmarklets manually. Select the bookmarklet’s code and copy it to your clipboard. If the bookmarklet is a link, right-click or long-press the link and copy its address to your clipboard. Open your browser’s bookmarks manager, add a bookmark, and paste the JavaScript code directly into the address box. Give your bookmarklet a name and save it. How to Use a Bookmarklet Bookmarklets are easiest to use if you have your browser’s bookmarks toolbar enabled. Just click the bookmarklet and your browser will run it on the current page. If you don’t have a bookmarks toolbar — such as on Safari on an iPad or another mobile browser — just open your browser’s bookmarks pane and tap or click the bookmark. In mobile Chrome, you’ll need to launch the bookmarklet from the location bar. Open the web page you want to run the bookmarklet on, tap your location bar, and start searching for the name of the bookmarklet. Tap the bookmarklet’s name to run it on the current page. Note that the bookmarklet only appears here because we have it saved as a bookmark in Chrome. You’ll need to add the bookmarklet to your browser’s bookmarks before you can use it in this way. The location bar approach may also be necessary in other browsers. The trick is loading the bookmark so that it will be associated with your current tab. You can’t just open your bookmarks in a separate browser tab and run the bookmarklet from there — it will run on that other browser tab. Bookmarklets are powerful and flexible. While they’re not as flashy as browser extensions, they’re much more lightweight and allow you to get extension-like features in more limited mobile browsers.

Read the article

postfix 5.7.1 Relay access denied when sending mail with cron

- by zensys

Reluctant to ask because there is so much here about 'postfix relay access denied' but I cannot find my case: I use php (Zend Framework) to send emails outside my network using the Google mail server because I could not send mail outside my server (user: web). However when I sent out an email via cron (user: root, I believe), still using ZF, using the same mail config/credentials, I get the message: '5.7.1 Relay access denied' I guess I need to know one of two things: 1. How can I use the google smtp server from cron 2. What do I need to change in my config to send mail using my own server instead of google Though the answer to 2. is the more structural solution I assume, I am quite happy with an answer to 1. as well because I think Google is better at server maintaince (security/spam) than I am. Below my ZF application.ini mail section, main.cf and master.cf: application.ini: resources.mail.transport.type = smtp resources.mail.transport.auth = login resources.mail.transport.host = "smtp.gmail.com" resources.mail.transport.ssl = tls resources.mail.transport.port = 587 resources.mail.transport.username = [email protected] resources.mail.transport.password = xxxxxxx resources.mail.defaultFrom.email = [email protected] resources.mail.defaultFrom.name = "my company" main.cf: # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = /usr/share/doc/postfix # TLS parameters smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = mail.second-start.nl mydomain = second-start.nl alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all html_directory = /usr/share/doc/postfix/html message_size_limit = 30720000 virtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_authenticated_header = yes # see under Spam smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps virtual_transport = dovecot dovecot_destination_recipient_limit = 1 # Spam disable_vrfy_command = yes smtpd_delay_reject = yes smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, check_helo_access hash:/etc/postfix/helo_access, reject_non_fqdn_hostname, reject_invalid_hostname, permit smtpd_recipient_restrictions = permit_sasl_authenticated, reject_unauth_destination, reject_invalid_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_sender_domain, reject_unknown_recipient_domain, permit_mynetworks, reject_non_fqdn_hostname, reject_rbl_client sbl.spamhaus.org, reject_rbl_client zen.spamhaus.org, reject_rbl_client cbl.abuseat.org, reject_rbl_client bl.spamcop.net, permit smtpd_error_sleep_time = 1s smtpd_soft_error_limit = 10 smtpd_hard_error_limit = 20 master.cf: # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #smtp inet n - - - 1 postscreen #smtpd pass - - - - - smtpd #dnsblog unix - - - - 0 dnsblog #tlsproxy unix - - - - 0 tlsproxy #submission inet n - - - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - - - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - - - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # ==================================================================== # # Recent Cyrus versions can use the existing "lmtp" master.cf entry. # # Specify in cyrus.conf: # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 # # Specify in main.cf one or more of the following: # mailbox_transport = lmtp:inet:localhost # virtual_transport = lmtp:inet:localhost # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # #cyrus unix - n n - - pipe # user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} # # ==================================================================== # Old example of delivery via Cyrus. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -d ${recipient}

Read the article

WPA2 authentication fails on Ubuntu 12.04 using Rosewill RNX-N1

- by user94156

Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. RNX-X1 works on other systems (including TV); also have 2 of 'em and tried each. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no

Read the article

HTML5 Input type=date Formatting Issues

- by Rick Strahl

One of the nice features in HTML5 is the abililty to specify a specific input type for HTML text input boxes. There a host of very useful input types available including email, number, date, datetime, month, number, range, search, tel, time, url and week. For a more complete list you can check out the MDN reference. Date input types also support automatic validation which can be useful in some scenarios but maybe can get in the way at other times. One of the more common input types, and one that can most benefit of a custom UI for selection is of course date input. Almost every application could use a decent date representation and HTML5's date input type seems to push into the right direction. It'd be nice if you could just say:<form action="DateTest.html"> <label for="FromDate">Enter a Date:</label> <input type="date" id="FromDate" name="FromDate" value="11/08/2012" class="date" /> <hr /> <input type="submit" id="btnSubmit" name="btnSubmit" value="Save Date" class="smallbutton" /> </form> but if you'd expect to just work, you're likely to be pretty disappointed. Problem #1: Browser Support For starters there's browser support. Out of the major browsers only the latest versions of WebKit and Opera based browsers seem to support date input. Neither FireFox, nor any version of Internet Explorer (including the new touch enabled IE10 in Windows RT) support input type=date. Browser support is an issue, but it would be OK if it wasn't for problem #2. Problem #2: Date Formatting If you look at my date input from before:<input type="date" id="FromDate" name="FromDate" value="11/08/2012" class="date" /> You can see that my date is formatted in local date format (ie. en-us). Now when I run this sadly the form that comes up in Chrome (and also iOS mobile browsers) comes up like this: Chrome isn't recognizing my local date string. Instead it's expecting my date format to be provided in ISO 8601 format which is: 2012-11-08 So if I change the date input field to:<input type="date" id="FromDate" name="FromDate" value="2012-10-08" class="date" /> I correctly get the date field filled in: Also when I pick a date with the DatePicker the date value is also returned is also set to the ISO date format. Yet notice how the date is still formatted to the local date time format (ie. en-US format). So if I pick a new date: and then save, the value field is set back to: 2012-11-15 using the ISO format. The same is true for Opera and iOS browsers and I suspect any other WebKit style browser and their date pickers. So to summarize input type=date: Expects ISO 8601 format dates to display intial values Sets selected date values to ISO 8601 Now what? This would sort of make sense, if all browsers supported input type=date. It'd be easy because you could just format dates appropriately when you set the date value into the control by applying the appropriate culture formatting (ie. .ToString("yyyy-MM-dd") ). .NET is actually smart enough to pick up the date on the other end for modelbinding when ISO 8601 is used. For other environments this might be a bit more tricky. input type=date is clearly the way to go forward. Date controls implemented in HTML are going the way of the dodo, given the intricacies of mobile platforms and scaling for both desktop and mobile. I've been using jQuery UI Datepicker for ages but once going to mobile, that's no longer an option as the control doesn't scale down well for mobile apps (at least not without major re-styling). It also makes a lot of sense for the browser to provide this functionality - creating a consistent date input experience across apps only makes sense, which is why I find it baffling that neither FireFox nor IE 10 deign it necessary to support date input natively. The problem is that a large number of even the latest and greatest browsers don't support this. So now you're stuck with not knowing what date format you have to serve since neither the local format, nor the ISO format works in all cases. For my current app I just broke down and used the ISO format and so I'll live with the non-local date format. <input type="date" id="ToDate" name="ToDate" value="2012-11-08" class="date"/> Here's what this looks like on Chrome: Here's what it looks like on my iPhone: Both Chrome and the phone do this the way it should be. For the phone especially this demonstrates why we'd want this - the built-in date picker there certainly beats manually trying to edit the date using finger gymnastics, and it's one of the easiest ways to pick a date I can think of (ie. easier to use than your typical date picker). Finally here's what the date looks like in FireFox: Certainly this is not the ideal date format, but it's clear enough I suppose. If users enter a date in local US format and that works as well (but won't work for other locales). It'll have to do. Over time one can only hope that other browsers will finally decide to implement this functionality natively to provide a unique experience. Until then, incomplete solutions it is. Related Posts Html 5 Input Types - How useful is this really going to be?© Rick Strahl, West Wind Technologies, 2005-2012Posted in HTML5 HTML Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

10 Windows Tweaking Myths Debunked

- by Chris Hoffman

Windows is big, complicated, and misunderstood. You’ll still stumble across bad advice from time to time when browsing the web. These Windows tweaking, performance, and system maintenance tips are mostly just useless, but some are actively harmful. Luckily, most of these myths have been stomped out on mainstream sites and forums. However, if you start searching the web, you’ll still find websites that recommend you do these things. Erase Cache Files Regularly to Speed Things Up You can free up disk space by running an application like CCleaner, another temporary-file-cleaning utility, or even the Windows Disk Cleanup tool. In some cases, you may even see an old computer speed up when you erase a large amount of useless files. However, running CCleaner or similar utilities every day to erase your browser’s cache won’t actually speed things up. It will slow down your web browsing as your web browser is forced to redownload the files all over again, and reconstruct the cache you regularly delete. If you’ve installed CCleaner or a similar program and run it every day with the default settings, you’re actually slowing down your web browsing. Consider at least preventing the program from wiping out your web browser cache. Enable ReadyBoost to Speed Up Modern PCs Windows still prompts you to enable ReadyBoost when you insert a USB stick or memory card. On modern computers, this is completely pointless — ReadyBoost won’t actually speed up your computer if you have at least 1 GB of RAM. If you have a very old computer with a tiny amount of RAM — think 512 MB — ReadyBoost may help a bit. Otherwise, don’t bother. Open the Disk Defragmenter and Manually Defragment On Windows 98, users had to manually open the defragmentation tool and run it, ensuring no other applications were using the hard drive while it did its work. Modern versions of Windows are capable of defragmenting your file system while other programs are using it, and they automatically defragment your disks for you. If you’re still opening the Disk Defragmenter every week and clicking the Defragment button, you don’t need to do this — Windows is doing it for you unless you’ve told it not to run on a schedule. Modern computers with solid-state drives don’t have to be defragmented at all. Disable Your Pagefile to Increase Performance When Windows runs out of empty space in RAM, it swaps out data from memory to a pagefile on your hard disk. If a computer doesn’t have much memory and it’s running slow, it’s probably moving data to the pagefile or reading data from it. Some Windows geeks seem to think that the pagefile is bad for system performance and disable it completely. The argument seems to be that Windows can’t be trusted to manage a pagefile and won’t use it intelligently, so the pagefile needs to be removed. As long as you have enough RAM, it’s true that you can get by without a pagefile. However, if you do have enough RAM, Windows will only use the pagefile rarely anyway. Tests have found that disabling the pagefile offers no performance benefit. Enable CPU Cores in MSConfig Some websites claim that Windows may not be using all of your CPU cores or that you can speed up your boot time by increasing the amount of cores used during boot. They direct you to the MSConfig application, where you can indeed select an option that appears to increase the amount of cores used. In reality, Windows always uses the maximum amount of processor cores your CPU has. (Technically, only one core is used at the beginning of the boot process, but the additional cores are quickly activated.) Leave this option unchecked. It’s just a debugging option that allows you to set a maximum number of cores, so it would be useful if you wanted to force Windows to only use a single core on a multi-core system — but all it can do is restrict the amount of cores used. Clean Your Prefetch To Increase Startup Speed Windows watches the programs you run and creates .pf files in its Prefetch folder for them. The Prefetch feature works as a sort of cache — when you open an application, Windows checks the Prefetch folder, looks at the application’s .pf file (if it exists), and uses that as a guide to start preloading data that the application will use. This helps your applications start faster. Some Windows geeks have misunderstood this feature. They believe that Windows loads these files at boot, so your boot time will slow down due to Windows preloading the data specified in the .pf files. They also argue you’ll build up useless files as you uninstall programs and .pf files will be left over. In reality, Windows only loads the data in these .pf files when you launch the associated application and only stores .pf files for the 128 most recently launched programs. If you were to regularly clean out the Prefetch folder, not only would programs take longer to open because they won’t be preloaded, Windows will have to waste time recreating all the .pf files. You could also modify the PrefetchParameters setting to disable Prefetch, but there’s no reason to do that. Let Windows manage Prefetch on its own. Disable QoS To Increase Network Bandwidth Quality of Service (QoS) is a feature that allows your computer to prioritize its traffic. For example, a time-critical application like Skype could choose to use QoS and prioritize its traffic over a file-downloading program so your voice conversation would work smoothly, even while you were downloading files. Some people incorrectly believe that QoS always reserves a certain amount of bandwidth and this bandwidth is unused until you disable it. This is untrue. In reality, 100% of bandwidth is normally available to all applications unless a program chooses to use QoS. Even if a program does choose to use QoS, the reserved space will be available to other programs unless the program is actively using it. No bandwidth is ever set aside and left empty. Set DisablePagingExecutive to Make Windows Faster The DisablePagingExecutive registry setting is set to 0 by default, which allows drivers and system code to be paged to the disk. When set to 1, drivers and system code will be forced to stay resident in memory. Once again, some people believe that Windows isn’t smart enough to manage the pagefile on its own and believe that changing this option will force Windows to keep important files in memory rather than stupidly paging them out. If you have more than enough memory, changing this won’t really do anything. If you have little memory, changing this setting may force Windows to push programs you’re using to the page file rather than push unused system files there — this would slow things down. This is an option that may be helpful for debugging in some situations, not a setting to change for more performance. Process Idle Tasks to Free Memory Windows does things, such as creating scheduled system restore points, when you step away from your computer. It waits until your computer is “idle” so it won’t slow your computer and waste your time while you’re using it. Running the “Rundll32.exe advapi32.dll,ProcessIdleTasks” command forces Windows to perform all of these tasks while you’re using the computer. This is completely pointless and won’t help free memory or anything like that — all you’re doing is forcing Windows to slow your computer down while you’re using it. This command only exists so benchmarking programs can force idle tasks to run before performing benchmarks, ensuring idle tasks don’t start running and interfere with the benchmark. Delay or Disable Windows Services There’s no real reason to disable Windows services anymore. There was a time when Windows was particularly heavy and computers had little memory — think Windows Vista and those “Vista Capable” PCs Microsoft was sued over. Modern versions of Windows like Windows 7 and 8 are lighter than Windows Vista and computers have more than enough memory, so you won’t see any improvements from disabling system services included with Windows. Some people argue for not disabling services, however — they recommend setting services from “Automatic” to “Automatic (Delayed Start)”. By default, the Delayed Start option just starts services two minutes after the last “Automatic” service starts. Setting services to Delayed Start won’t really speed up your boot time, as the services will still need to start — in fact, it may lengthen the time it takes to get a usable desktop as services will still be loading two minutes after booting. Most services can load in parallel, and loading the services as early as possible will result in a better experience. The “Delayed Start” feature is primarily useful for system administrators who need to ensure a specific service starts later than another service. If you ever find a guide that recommends you set a little-known registry setting to improve performance, take a closer look — the change is probably useless. Want to actually speed up your PC? Try disabling useless startup programs that run on boot, increasing your boot time and consuming memory in the background. This is a much better tip than doing any of the above, especially considering most Windows PCs come packed to the brim with bloatware.

Read the article

Adding objects to the environment at timed intervals

- by david

I am using an ArrayList to handle objects and at each interval of 120 frames, I am adding a new object of the same type at a random location along the z-axis of 60. The problem is, it doesn't add just 1. It depends on how many are in the list. If I kill the Fox before the time interval when one is supposed to spawn comes, then no Fox will be spawned. If I don't kill any foxes, it grows exponentially. I only want one Fox to be added every 120 frames. This problem never happened before when I created new ones and added them to the environment. Any insights? Here is my code: /**** FOX CLASS ****/ import env3d.EnvObject; import java.util.ArrayList; public class Fox extends Creature { private int frame = 0; public Fox(double x, double y, double z) { super(x, y, z); // Must use the mutator as the fields have private access // in the parent class setTexture("models/fox/fox.png"); setModel("models/fox/fox.obj"); setScale(1.4); } public void move(ArrayList<Creature> creatures, ArrayList<Creature> dead_creatures, ArrayList<Creature> new_creatures) { frame++; setX(getX()-0.2); setRotateY(270); if (frame > 120) { Fox f = new Fox(60, 1, (int)(Math.random()*28)+1); new_creatures.add(f); frame = 0; } for (Creature c : creatures) { if (this.distance(c) < this.getScale()+c.getScale() && c instanceof Tux) { dead_creatures.add(c); } } for (Creature c : creatures) { if (c.getX() < 1 && c instanceof Fox) { dead_creatures.add(c); } } } } import env3d.Env; import java.util.ArrayList; import org.lwjgl.input.Keyboard; /** * A predator and prey simulation. Fox is the predator and Tux is the prey. */ public class Game { private Env env; private boolean finished; private ArrayList<Creature> creatures; private KingTux king; private Snowball ball; private int tuxcounter; private int kills; /** * Constructor for the Game class. It sets up the foxes and tuxes. */ public Game() { // we use a separate ArrayList to keep track of each animal. // our room is 50 x 50. creatures = new ArrayList<Creature>(); for (int i = 0; i < 10; i++) { creatures.add(new Tux((int)(Math.random()*10)+1, 1, (int)(Math.random()*28)+1)); } for (int i = 0; i < 1; i++) { creatures.add(new Fox(60, 1, (int)(Math.random()*28)+1)); } king = new KingTux(25, 1, 35); ball = new Snowball(-400, -400, -400); } /** * Play the game */ public void play() { finished = false; // Create the new environment. Must be done in the same // method as the game loop env = new Env(); // Make the room 50 x 50. env.setRoom(new Room()); // Add all the animals into to the environment for display for (Creature c : creatures) { env.addObject(c); } for (Creature c : creatures) { if (c instanceof Tux) { tuxcounter++; } } env.addObject(king); env.addObject(ball); // Sets up the camera env.setCameraXYZ(30, 50, 55); env.setCameraPitch(-63); // Turn off the default controls env.setDefaultControl(false); // A list to keep track of dead tuxes. ArrayList<Creature> dead_creatures = new ArrayList<Creature>(); ArrayList<Creature> new_creatures = new ArrayList<Creature>(); // The main game loop while (!finished) { if (env.getKey() == 1 || tuxcounter == 0) { finished = true; } env.setDisplayStr("Tuxes: " + tuxcounter, 15, 0); env.setDisplayStr("Kills: " + kills, 140, 0); processInput(); ball.move(); king.check(); // Move each fox and tux. for (Creature c : creatures) { c.move(creatures, dead_creatures, new_creatures); } for (Creature c : creatures) { if (c.distance(ball) < c.getScale()+ball.getScale() && c instanceof Fox) { dead_creatures.add(c); ball.setX(-400); ball.setY(-400); ball.setZ(-400); kills++; } } // Clean up of the dead tuxes. for (Creature c : dead_creatures) { if (c instanceof Tux) { tuxcounter--; } env.removeObject(c); creatures.remove(c); } for (Creature c : new_creatures) { creatures.add(c); env.addObject(c); } // we clear the ArrayList for the next loop. We could create a new one // every loop but that would be very inefficient. dead_creatures.clear(); new_creatures.clear(); // Update display env.advanceOneFrame(); } // Just a little clean up env.exit(); } private void processInput() { int keyDown = env.getKeyDown(); int key = env.getKey(); if (keyDown == 203) { king.setX(king.getX()-1); } else if (keyDown == 205) { king.setX(king.getX()+1); } if (ball.getX() <= -400 && key == Keyboard.KEY_S) { ball.setX(king.getX()); ball.setY(king.getY()); ball.setZ(king.getZ()); } } /** * Main method to launch the program. */ public static void main(String args[]) { (new Game()).play(); } } /**** CREATURE CLASS ****/ /* (Parent class to Tux, Fox, and KingTux) */ import env3d.EnvObject; import java.util.ArrayList; abstract public class Creature extends EnvObject { private int frame; private double rand; /** * Constructor for objects of class Creature */ public Creature(double x, double y, double z) { setX(x); setY(y); setZ(z); setScale(1); rand = Math.random(); } private void randomGenerator() { rand = Math.random(); } public void move(ArrayList<Creature> creatures, ArrayList<Creature> dead_creatures, ArrayList<Creature> new_creatures) { frame++; if (frame > 12) { randomGenerator(); frame = 0; } // if (rand < 0.25) { // setX(getX()+0.3); // setRotateY(90); // } else if (rand < 0.5) { // setX(getX()-0.3); // setRotateY(270); // } else if (rand < 0.75) { // setZ(getZ()+0.3); // setRotateY(0); // } else if (rand < 1) { // setZ(getZ()-0.3); // setRotateY(180); // } if (rand < 0.5) { setRotateY(getRotateY()-7); } else if (rand < 1) { setRotateY(getRotateY()+7); } setX(getX()+Math.sin(Math.toRadians(getRotateY()))*0.5); setZ(getZ()+Math.cos(Math.toRadians(getRotateY()))*0.5); if (getX() < getScale()) setX(getScale()); if (getX() > 50-getScale()) setX(50 - getScale()); if (getZ() < getScale()) setZ(getScale()); if (getZ() > 50-getScale()) setZ(50 - getScale()); // The move method now handles collision detection if (this instanceof Fox) { for (Creature c : creatures) { if (c.distance(this) < c.getScale()+this.getScale() && c instanceof Tux) { dead_creatures.add(c); } } } } } The rest of the classes are a bit trivial to this specific problem.

Read the article

Oracle Solaris 11 ZFS Lab for Openworld 2012

- by user12626122

Preface This is the content from the Oracle Openworld 2012 ZFS lab. It was well attended - the feedback was that it was a little short - thats probably because in writing it I bacame very time-concious after the ASM/ACFS on Solaris extravaganza I ran last year which was almost too long for mortal man to finish in the 1 hour session. Enjoy. Table of Contents Exercise Z.1: ZFS Pools Exercise Z.2: ZFS File Systems Exercise Z.3: ZFS Compression Exercise Z.4: ZFS Deduplication Exercise Z.5: ZFS Encryption Exercise Z.6: Solaris 11 Shadow Migration Introduction This set of exercises is designed to briefly demonstrate new features in Solaris 11 ZFS file system: Deduplication, Encryption and Shadow Migration. Also included is the creation of zpools and zfs file systems - the basic building blocks of the technology, and also Compression which is the compliment of Deduplication. The exercises are just introductions - you are referred to the ZFS Adminstration Manual for further information. From Solaris 11 onward the online manual pages consist of zpool(1M) and zfs(1M) with further feature-specific information in zfs_allow(1M), zfs_encrypt(1M) and zfs_share(1M). The lab is easily carried out in a VirtualBox running Solaris 11 with 6 virtual 3 Gb disks to play with. Exercise Z.1: ZFS Pools Task: You have several disks to use for your new file system. Create a new zpool and a file system within it. Lab: You will check the status of existing zpools, create your own pool and expand it. Your Solaris 11 installation already has a root ZFS pool. It contains the root file system. Check this: root@solaris:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 15.9G 6.62G 9.25G 41% 1.00x ONLINE - root@solaris:~# zpool status pool: rpool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 c3t0d0s0 ONLINE 0 0 0 errors: No known data errors Note the disk device the root pool is on - c3t0d0s0 Now you will create your own ZFS pool. First you will check what disks are available: root@solaris:~# echo | format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c3t0d0 <ATA-VBOX HARDDISK-1.0 cyl 2085 alt 2 hd 255 sec 63> /pci@0,0/pci8086,2829@d/disk@0,0 1. c3t2d0 <ATA-VBOX HARDDISK-1.0 cyl 1534 alt 2 hd 128 sec 32> /pci@0,0/pci8086,2829@d/disk@2,0 2. c3t3d0 <ATA-VBOX HARDDISK-1.0 cyl 1534 alt 2 hd 128 sec 32> /pci@0,0/pci8086,2829@d/disk@3,0 3. c3t4d0 <ATA-VBOX HARDDISK-1.0 cyl 1534 alt 2 hd 128 sec 32> /pci@0,0/pci8086,2829@d/disk@4,0 4. c3t5d0 <ATA-VBOX HARDDISK-1.0 cyl 1534 alt 2 hd 128 sec 32> /pci@0,0/pci8086,2829@d/disk@5,0 5. c3t6d0 <ATA-VBOX HARDDISK-1.0 cyl 1534 alt 2 hd 128 sec 32> /pci@0,0/pci8086,2829@d/disk@6,0 6. c3t7d0 <ATA-VBOX HARDDISK-1.0 cyl 1534 alt 2 hd 128 sec 32> /pci@0,0/pci8086,2829@d/disk@7,0 Specify disk (enter its number): Specify disk (enter its number): The root disk is numbered 0. The others are free for use. Try creating a simple pool and observe the error message: root@solaris:~# zpool create mypool c3t2d0 c3t3d0 'mypool' successfully created, but with no redundancy; failure of one device will cause loss of the pool So destroy that pool and create a mirrored pool instead: root@solaris:~# zpool destroy mypool root@solaris:~# zpool create mypool mirror c3t2d0 c3t3d0 root@solaris:~# zpool status mypool pool: mypool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM mypool ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 c3t2d0 ONLINE 0 0 0 c3t3d0 ONLINE 0 0 0 errors: No known data errors Back to topExercise Z.2: ZFS File Systems Task: You have to create file systems for later exercises. You can see that when a pool is created, a file system of the same name is created: root@solaris:~# zfs list NAME USED AVAIL REFER MOUNTPOINT mypool 86.5K 2.94G 31K /mypool Create your filesystems and mountpoints as follows: root@solaris:~# zfs create -o mountpoint=/data1 mypool/mydata1 The -o option sets the mount point and automatically creates the necessary directory. root@solaris:~# zfs list mypool/mydata1 NAME USED AVAIL REFER MOUNTPOINT mypool/mydata1 31K 2.94G 31K /data1 Back to top Exercise Z.3: ZFS Compression Task:Try out different forms of compression available in ZFS Lab:Create 2nd filesystem with compression, fill both file systems with the same data, observe results You can see from the zfs(1) manual page that there are several types of compression available to you, set with the property=value syntax: compression=on | off | lzjb | gzip | gzip-N | zle Controls the compression algorithm used for this dataset. The lzjb compression algorithm is optimized for performance while providing decent data compression. Setting compression to on uses the lzjb compression algorithm. The gzip compression algorithm uses the same compression as the gzip(1) command. You can specify the gzip level by using the value gzip-N where N is an integer from 1 (fastest) to 9 (best compression ratio). Currently, gzip is equivalent to gzip-6 (which is also the default for gzip(1)). Create a second filesystem with compression turned on. Note how you set and get your values separately: root@solaris:~# zfs create -o mountpoint=/data2 mypool/mydata2 root@solaris:~# zfs set compression=gzip-9 mypool/mydata2 root@solaris:~# zfs get compression mypool/mydata1 NAME PROPERTY VALUE SOURCE mypool/mydata1 compression off default root@solaris:~# zfs get compression mypool/mydata2 NAME PROPERTY VALUE SOURCE mypool/mydata2 compression gzip-9 local Now you can copy the contents of /usr/lib into both your normal and compressing filesystem and observe the results. Don't forget the dot or period (".") in the find(1) command below: root@solaris:~# cd /usr/lib root@solaris:/usr/lib# find . -print | cpio -pdv /data1 root@solaris:/usr/lib# find . -print | cpio -pdv /data2 The copy into the compressing file system takes longer - as it has to perform the compression but the results show the effect: root@solaris:/usr/lib# zfs list NAME USED AVAIL REFER MOUNTPOINT mypool 1.35G 1.59G 31K /mypool mypool/mydata1 1.01G 1.59G 1.01G /data1 mypool/mydata2 341M 1.59G 341M /data2 Note that the available space in the pool is shared amongst the file systems. This behavior can be modified using quotas and reservations which are not covered in this lab but are covered extensively in the ZFS Administrators Guide. Back to top Exercise Z.4: ZFS Deduplication The deduplication property is used to remove redundant data from a ZFS file system. With the property enabled duplicate data blocks are removed synchronously. The result is that only unique data is stored and common componenents are shared. Task:See how to implement deduplication and its effects Lab: You will create a ZFS file system with deduplication turned on and see if it reduces the amount of physical storage needed when we again fill it with a copy of /usr/lib. root@solaris:/usr/lib# zfs destroy mypool/mydata2 root@solaris:/usr/lib# zfs set dedup=on mypool/mydata1 root@solaris:/usr/lib# rm -rf /data1/* root@solaris:/usr/lib# mkdir /data1/2nd-copy root@solaris:/usr/lib# zfs list NAME USED AVAIL REFER MOUNTPOINT mypool 1.02M 2.94G 31K /mypool mypool/mydata1 43K 2.94G 43K /data1 root@solaris:/usr/lib# find . -print | cpio -pd /data1 2142768 blocks root@solaris:/usr/lib# zfs list NAME USED AVAIL REFER MOUNTPOINT mypool 1.02G 1.99G 31K /mypool mypool/mydata1 1.01G 1.99G 1.01G /data1 root@solaris:/usr/lib# find . -print | cpio -pd /data1/2nd-copy 2142768 blocks root@solaris:/usr/lib#zfs list NAME USED AVAIL REFER MOUNTPOINT mypool 1.99G 1.96G 31K /mypool mypool/mydata1 1.98G 1.96G 1.98G /data1 You could go on creating copies for quite a while...but you get the idea. Note that deduplication and compression can be combined: the compression acts on metadata. Deduplication works across file systems in a pool and there is a zpool-wide property dedupratio: root@solaris:/usr/lib# zpool get dedupratio mypool NAME PROPERTY VALUE SOURCE mypool dedupratio 4.30x - Deduplication can also be checked using "zpool list": root@solaris:/usr/lib# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT mypool 2.98G 1001M 2.01G 32% 4.30x ONLINE - rpool 15.9G 6.66G 9.21G 41% 1.00x ONLINE - Before moving on to the next topic, destroy that dataset and free up some space: root@solaris:~# zfs destroy mypool/mydata1 Back to top Exercise Z.5: ZFS Encryption Task: Encrypt sensitive data. Lab: Explore basic ZFS encryption. This lab only covers the basics of ZFS Encryption. In particular it does not cover various aspects of key management. Please see the ZFS Adminastrion Manual and the zfs_encrypt(1M) manual page for more detail on this functionality. Back to top root@solaris:~# zfs create -o encryption=on mypool/data2 Enter passphrase for 'mypool/data2': ******** Enter again: ******** root@solaris:~# Creation of a descendent dataset shows that encryption is inherited from the parent: root@solaris:~# zfs create mypool/data2/data3 root@solaris:~# zfs get -r encryption,keysource,keystatus,checksum mypool/data2 NAME PROPERTY VALUE SOURCE mypool/data2 encryption on local mypool/data2 keysource passphrase,prompt local mypool/data2 keystatus available - mypool/data2 checksum sha256-mac local mypool/data2/data3 encryption on inherited from mypool/data2 mypool/data2/data3 keysource passphrase,prompt inherited from mypool/data2 mypool/data2/data3 keystatus available - mypool/data2/data3 checksum sha256-mac inherited from mypool/data2 You will find the online manual page zfs_encrypt(1M) contains examples. In particular, if time permits during this lab session you may wish to explore the changing of a key using "zfs key -c mypool/data2". Exercise Z.6: Shadow Migration Shadow Migration allows you to migrate data from an old file system to a new file system while simultaneously allowing access and modification to the new file system during the process. You can use Shadow Migration to migrate a local or remote UFS or ZFS file system to a local file system. Task: You wish to migrate data from one file system (UFS, ZFS, VxFS) to ZFS while mainaining access to it. Lab: Create the infrastructure for shadow migration and transfer one file system into another. First create the file system you want to migrate root@solaris:~# zpool create oldstuff c3t4d0 root@solaris:~# zfs create oldstuff/forgotten Then populate it with some files: root@solaris:~# cd /var/adm root@solaris:/var/adm# find . -print | cpio -pdv /oldstuff/forgotten You need the shadow-migration package installed: root@solaris:~# pkg install shadow-migration Packages to install: 1 Create boot environment: No Create backup boot environment: No Services to change: 1 DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 14/14 0.2/0.2 PHASE ACTIONS Install Phase 39/39 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 You then enable the shadowd service: root@solaris:~# svcadm enable shadowd root@solaris:~# svcs shadowd STATE STIME FMRI online 7:16:09 svc:/system/filesystem/shadowd:default Set the filesystem to be migrated to read-only root@solaris:~# zfs set readonly=on oldstuff/forgotten Create a new zfs file system with the shadow property set to the file system to be migrated: root@solaris:~# zfs create -o shadow=file:///oldstuff/forgotten mypool/remembered Use the shadowstat(1M) command to see the progress of the migration: root@solaris:~# shadowstat EST BYTES BYTES ELAPSED DATASET XFRD LEFT ERRORS TIME mypool/remembered 92.5M - - 00:00:59 mypool/remembered 99.1M 302M - 00:01:09 mypool/remembered 109M 260M - 00:01:19 mypool/remembered 133M 304M - 00:01:29 mypool/remembered 149M 339M - 00:01:39 mypool/remembered 156M 86.4M - 00:01:49 mypool/remembered 156M 8E 29 (completed) Note that if you had created /mypool/remembered as encrypted, this would be the preferred method of encrypting existing data. Similarly for compressing or deduplicating existing data. The procedure for migrating a file system over NFS is similar - see the ZFS Administration manual. That concludes this lab session.

Read the article

Packaging Swing apps with integrated JavaFX content

- by igor

JavaFX provides a lot of interesting capabilities for developing rich client applications in Java, but what if you are working on an existing Swing application and you want to take advantage of these new features? Maybe you want to use one or two controls like the LineChart or a MediaView. Maybe you want to embed a large Scene Graph as an initial step in porting your application to FX. A hybrid Swing/FX application might just be the answer. Developing a hybrid Swing + JavaFX application is not terribly difficult, but until recently the deployment of hybrid applications has not simple as a "pure" JavaFX application. The existing tools focused on packaging FX Applications, or Swing applications - they did not account for hybrid applications. But with JavaFX 2.2 the tools include support for this hybrid application use case. Solution In JavaFX 2.2 we extended the packaging ant tasks to greatly simplify deploying hybrid applications. You now use the same deployment approach as you would for pure JavaFX applications. Just bundle your main application jar with the fx:jar ant task and then generate html/jnlp files using fx:deploy. The only difference is setting toolkit attribute for the fx:application tag as shown below: <fx:application id="swingFXApp" mainClass="${main.class}" toolkit="swing"/> The value of ${main.class} in the example above is your application class which has a main method. It does not need to extend JavaFX Application class. The resulting package provides support for the same set of execution modes as a package for a JavaFX application, although the packages which are created are not identical to the packages created for a pure FX application. You will see two JNLP files generated in the case of a hybrid application - one for use from Swing applet and another for the webstart launch. Note that these improvements do not alter the set of features available to Swing applications. The packaging tools just make it easier to use the advanced features of JavaFX in your Swing application. The same limits still apply, for example a Swing application can not use JavaFX Preloaders and code changes are necessary to support HTML splash screens. Why should I use the JavaFX ant tasks for packaging my Swing application? While using FX packaging tool for a Swing application may seem like a mismatch at face value, there are some really good reasons to use this approach. The primary justification for our packaging tools is to simplify the creation of your application artifacts, and to reduce manual errors. Plus, no one should have to write JNLP by hand. Some specific benefits include: Your application jar will include a launcher program. This improves your standalone launch by: checking for the JavaFX runtime guiding the user through any necessary installations setting the system proxy for Java The ant tasks will generate JNLP and HTML files for your swing app: avoids learning unnecessary details about JNLP, and eliminates the error-prone hand editing of JNLP files simplifies using advanced features like embedding JNLP and signing jars as BLOBs to improve launch performance.you can also embed the signing certificate details to improve the user's experience allows the use of web page templates to inject the generated code directly into your actual web page instead of being forced to copy/paste the generated code snippets. What about native packing? Absolutely! The very same ant task can generate a native bundle for a Swing application with JavaFX content. Try running one of these sample native bundles for the "SwingInterop" FX example: exe and dmg. I also used another feature on these examples: a click-through license agreement for .exe installers and OS X DMG drag installers. Small Caveat This packaging procedure is optimized around using the JavaFX packaging tools for your entire Swing application. If you are trying to embed JavaFX content into existing project (with an existing build/packing process) then you may need to experiment in order to find the best way to integrate the JavaFX packaging steps into your existing build procedure. As long as you can use ant in your build process this should be a workable approach. It some cases solution could be less than ideal. For example, you need to use fx:jar to package your main jar file in order to produce a double-clickable jar or a native bundle. The jar will be created from scratch, but you may already be creating the main jar file with a custom manifest. This may lead to some redundant steps in your build process. Hopefully the benefits will outweigh the problems. This is an area of ongoing development for the team, and we will continue to refine and improve both the tools and the process. Please share your experiences and suggestions with us. You can comment here on the blog or file issues to JIRA. Sample code Here is the full ant code used to package SwingInterop. You can grab latest JavaFX samples and try it yourself: <target name="-post-jar"> <taskdef resource="com/sun/javafx/tools/ant/antlib.xml" uri="javafx:com.sun.javafx.tools.ant" classpath="${javafx.tools.ant.jar}"/>  <fx:application id="swingFXApp" mainClass="${main.class}" toolkit="swing"/>  <fx:jar destfile="${dist.jar}"> <fileset dir="${build.classes.dir}"/> <fx:application refid="swingFXApp" name="SwingInterop"/> <manifest> <attribute name="Implementation-Vendor" value="${application.vendor}"/> <attribute name="Implementation-Title" value="${application.title}"/> <attribute name="Implementation-Version" value="1.0"/> </manifest> </fx:jar>  <delete file="${build.dir}/test.keystore"/> <genkey alias="TestAlias" storepass="xyz123" keystore="${build.dir}/test.keystore" dname="CN=Samples, OU=JavaFX Dev, O=Oracle, C=US"/> <fx:signjar keystore="${build.dir}/test.keystore" alias="TestAlias" storepass="xyz123"> <fileset file="${dist.jar}"/> </fx:signjar>  <fx:deploy width="960" height="720" includeDT="true" nativeBundles="all" outdir="${basedir}/${dist.dir}" embedJNLP="true" outfile="${application.title}"> <fx:application refId="swingFXApp"/> <fx:resources> <fx:fileset dir="${basedir}/${dist.dir}" includes="SwingInterop.jar"/> </fx:resources> <fx:permissions/> <info title="Sample app: ${application.title}" vendor="${application.vendor}"/> </fx:deploy> </target>

Read the article

Spotlight Infinite Indexing issue (external data drive)

- by Manca Weeks

This is an external drive, formerly a boot drive which is now in use only to access music files (sibelius, audio, midi, live, logic etc.) without transferring the data into a new boot system, partly because of the issue I am about to describe, but mostly because the majority of the data is mainly there for archival purposes. The user is a composer and prominent musician and needs to be able to rehash the data at will. I have tried several things - here is a list: - make complete filesystem clone with antonio diaz's ddrescue - run Disk Warrior on copy, repair whatever errors occurred - wipe out all ACLs on entire drive - set all permissions to the same value - wide open 777 - remove any system data (applications, system files, including hidden files to the best of my knowledge) by selecting only non-system/app data and using Carbon Copy Cloner to put only the data of interest onto a newly formatted drive - transfer data to newly formatted drive folder by folder, resetting the spotlight index in between adding each to observe for issues (interesting here is that no issues occurred except for in Documents folder - when I transferred only the Documents folder to a newly formatted drive on its own - no trouble. It appears almost as thought it may not be the content but the quantity or specific combination of data that results in problems) - use DataRescue to transfer the data to yet another newly formatted drive to expose any missed hidden files Between each of the above steps I stopped Spotlight (search for anything beginning with md in Activity Monitor - All Processes and quitting it), deleted the .Spotlight-V100 directory from the affected drive. Restart Splotlight indexing by adding drive to Spotlight privacy list and removing it. In each case the same issue occurs - Spotlight begins indexing normally (or so it seems), then the index estimated time increases, usually to 4 hours remaining. This is where it gets stuck and continues to predict 4 hours remaining but never finishes. Sometimes I can't eject the drive and have to quit the md.. processes from Activity Monitor to be able to eject the drive without Force Eject. Once I disconnect the drive after the 4 hours remaining situation - if I reattach it, Spotlight forever estimates remaining time and never gets going again. So there it is. It is apparently not a filesystem issue, not a permissions issue and not tied to any particular piece of hardware or protocol (used USB and FW drives). I have tried this on several machines (3 to be precise) and in 10.5.8 and 10.6.5. Simply disabling Spotlight on this volume is not an option because the owner has no clue where things are as the data on the volume dates back to music projects and compositions from 2003 and before. He needs to be able to query for results. Anyone got any ideas? ---update 2-6-11 Since I have not received any responses except the one below which appears to misunderstand my point, I am updating this post hoping to get more responses. I have used the terminal command sudo opensnoop -p PID where PID is the mdworker process ID to try and determine what Spotlight is doing and hopefully find the files it's having trouble with. Here's what happens: After indexing for a few hours, mdworker is gone. It no longer shows up in Activity Monitor under "All Processes" and the Terminal window with the opensnoop result stops moving. I then proceeded to execute the same command on mds to see what it was doing and here's what I get, repeatedly: 501 57 mds 21 / 501 57 mds 21 /Volumes/Sno Leppard 501 57 mds 21 /Volumes/Tiger 501 57 mds 21 /Volumes/Leppard 501 57 mds 21 /Volumes/Disk Warrior 501 57 mds 21 /Volumes/ONM Data These represent all the volumes currently mounted in the system. All except ONM Data, which is the one I am trying to index, are excluded from SPotlight indexing at the moment. The sequence above repeats over and over, with slight variation, sometimes skipping one of the volumes. Questions - what happened to mdworker? What is mds doing? I will let this run until tomorrow morning and throughout the day and monitor for any changes. Any input would be very much appreciated. Even if you're not sure what the ultimate answer is, please alert me to anything you think I may be missing. Hopefully at some point we will figure this out... Thanks, M __final edit__ I finally resolved the issue and here is how I did it. I used the terminal command "sudo opensnoop -p PID" where the PID is the process id of the processes I was monitoring. I was looking at all instances of mds and mdworker running in the system. After the third time through indexing the same data set (see info above), I contacted Apple and got to their highest level of support - they were flabbergasted as well. They advised me to install yet another default 10.6.6 system and try again. The same pattern repeated - mds and mdworker(s) would start indexing and eventually the spotlight icon would say 6 hours remaining and all mdworkers were gone, mds at 90% or so of CPU. But I did finally figure out that the first time mdworker stopped like that, the last file it touched was always in the same folder. I excluded that folder from spotlight search and the rest of the data set indexed within about 2 hours with no strange behavior or failures. I copied that folder to another machine and Spotlight barfed immediately. Exclude that folder and all is well again. I have no clue what is causing this behavior, still, but I did find a functional solution to the problem. Anyone with a similar problem - run opensnoop on all instances of mds and mdworker and wait patiently for wdworker to exit. Look at the last file it touched and exclude the enclosing folder from being indexed. I was able to repeat the issue and solution on 2 different installs and 2 different copies of the data set. Hope this helps. If we find an actual cause of the folder being such a problem (it is called MICHAEL BRECKER RECORD SOLOS and contains almost 1 GB of audio related files - performer, live, SD2 - things like that), I will edit again to let you all know. Thanks for ay attempts to help, M

Read the article

SQL University: Database testing and refactoring tools and examples

- by Mladen Prajdic

This is a post for a great idea called SQL University started by Jorge Segarra also famously known as SqlChicken on Twitter. It’s a collection of blog posts on different database related topics contributed by several smart people all over the world. So this week is mine and we’ll be talking about database testing and refactoring. In 3 posts we’ll cover: SQLU part 1 - What and why of database testing SQLU part 2 - What and why of database refactoring SQLU part 3 - Database testing and refactoring tools and examples This is the third and last part of the series and in it we’ll take a look at tools we can test and refactor with plus some an example of the both. Tools of the trade First a few thoughts about how to go about testing a database. I'm firmily against any testing tools that go into the database itself or need an extra database. Unit tests for the database and applications using the database should all be in one place using the same technology. By using database specific frameworks we fragment our tests into many places and increase test system complexity. Let’s take a look at some testing tools. 1. NUnit, xUnit, MbUnit All three are .Net testing frameworks meant to unit test .Net application. But we can test databases with them just fine. I use NUnit because I’ve always used it for work and personal projects. One day this might change. So the thing to remember is to be flexible if something better comes along. All three are quite similar and you should be able to switch between them without much problem. 2. TSQLUnit As much as this framework is helpful for the non-C# savvy folks I don’t like it for the reason I stated above. It lives in the database and thus fragments the testing infrastructure. Also it appears that it’s not being actively developed anymore. 3. DbFit I haven’t had the pleasure of trying this tool just yet but it’s on my to-do list. From what I’ve read and heard Gojko Adzic (@gojkoadzic on Twitter) has done a remarkable job with it. 4. Redgate SQL Refactor and Apex SQL Refactor Neither of these refactoring tools are free, however if you have hardcore refactoring planned they are worth while looking into. I’ve only used the Red Gate’s Refactor and was quite impressed with it. 5. Reverting the database state I’ve talked before about ways to revert a database to pre-test state after unit testing. This still holds and I haven’t changed my mind. Also make sure to read the comments as they are quite informative. I especially like the idea of setting up and tearing down the schema for each test group with NHibernate. Testing and refactoring example We’ll take a look at the simple schema and data test for a view and refactoring the SELECT * in that view. We’ll use a single table PhoneNumbers with ID and Phone columns. Then we’ll refactor the Phone column into 3 columns Prefix, Number and Suffix. Lastly we’ll remove the original Phone column. Then we’ll check how the view behaves with tests in NUnit. The comments in code explain the problem so be sure to read them. I’m assuming you know NUnit and C#. T-SQL Code C# test code USE tempdbGOCREATE TABLE PhoneNumbers( ID INT IDENTITY(1,1), Phone VARCHAR(20))GOINSERT INTO PhoneNumbers(Phone)SELECT '111 222333 444' UNION ALLSELECT '555 666777 888'GO-- notice we don't have WITH SCHEMABINDINGCREATE VIEW vPhoneNumbersAS SELECT * FROM PhoneNumbersGO-- Let's take a look at what the view returns -- If we add a new columns and rows both tests will failSELECT *FROM vPhoneNumbers GO -- DoesViewReturnCorrectColumns test will SUCCEED -- DoesViewReturnCorrectData test will SUCCEED -- refactor to split Phone column into 3 partsALTER TABLE PhoneNumbers ADD Prefix VARCHAR(3)ALTER TABLE PhoneNumbers ADD Number VARCHAR(6)ALTER TABLE PhoneNumbers ADD Suffix VARCHAR(3)GO-- update the new columnsUPDATE PhoneNumbers SET Prefix = LEFT(Phone, 3), Number = SUBSTRING(Phone, 5, 6), Suffix = RIGHT(Phone, 3)GO-- remove the old columnALTER TABLE PhoneNumbers DROP COLUMN PhoneGO-- This returns unexpected results!-- it returns 2 columns ID and Phone even though -- we don't have a Phone column anymore.-- Notice that the data is from the Prefix column-- This is a danger of SELECT *SELECT *FROM vPhoneNumbers -- DoesViewReturnCorrectColumns test will SUCCEED -- DoesViewReturnCorrectData test will FAIL -- for a fix we have to call sp_refreshview -- to refresh the view definitionEXEC sp_refreshview 'vPhoneNumbers'-- after the refresh the view returns 4 columns-- this breaks the input/output behavior of the database-- which refactoring MUST NOT doSELECT *FROM vPhoneNumbers -- DoesViewReturnCorrectColumns test will FAIL -- DoesViewReturnCorrectData test will FAIL -- to fix the input/output behavior change problem -- we have to concat the 3 columns into one named PhoneALTER VIEW vPhoneNumbersASSELECT ID, Prefix + ' ' + Number + ' ' + Suffix AS PhoneFROM PhoneNumbersGO-- now it works as expectedSELECT *FROM vPhoneNumbers -- DoesViewReturnCorrectColumns test will SUCCEED -- DoesViewReturnCorrectData test will SUCCEED -- clean upDROP VIEW vPhoneNumbersDROP TABLE PhoneNumbers [Test]public void DoesViewReturnCoorectColumns(){ // conn is a valid SqlConnection to the server's tempdb // note the SET FMTONLY ON with which we return only schema and no data using (SqlCommand cmd = new SqlCommand("SET FMTONLY ON; SELECT * FROM vPhoneNumbers", conn)) { DataTable dt = new DataTable(); dt.Load(cmd.ExecuteReader(CommandBehavior.CloseConnection)); // test returned schema: number of columns, column names and data types Assert.AreEqual(dt.Columns.Count, 2); Assert.AreEqual(dt.Columns[0].Caption, "ID"); Assert.AreEqual(dt.Columns[0].DataType, typeof(int)); Assert.AreEqual(dt.Columns[1].Caption, "Phone"); Assert.AreEqual(dt.Columns[1].DataType, typeof(string)); }} [Test]public void DoesViewReturnCorrectData(){ // conn is a valid SqlConnection to the server's tempdb using (SqlCommand cmd = new SqlCommand("SELECT * FROM vPhoneNumbers", conn)) { DataTable dt = new DataTable(); dt.Load(cmd.ExecuteReader(CommandBehavior.CloseConnection)); // test returned data: number of rows and their values Assert.AreEqual(dt.Rows.Count, 2); Assert.AreEqual(dt.Rows[0]["ID"], 1); Assert.AreEqual(dt.Rows[0]["Phone"], "111 222333 444"); Assert.AreEqual(dt.Rows[1]["ID"], 2); Assert.AreEqual(dt.Rows[1]["Phone"], "555 666777 888"); }} With this simple example we’ve seen how a very simple schema can cause a lot of problems in the whole application/database system if it doesn’t have tests. Imagine what would happen if some outside process would depend on that view. It would get wrong data and propagate it silently throughout the system. And that is not good. So have tests at least for the crucial parts of your systems. And with that we conclude the Database Testing and Refactoring week at SQL University. Hope you learned something new and enjoy the learning weeks to come. Have fun!

Read the article

CodePlex Daily Summary for Tuesday, May 29, 2012

CodePlex Daily Summary for Tuesday, May 29, 2012Popular ReleasesDotNetNuke Azure Accelerator: DotNetNuke Azure Accelerator 6.2: Windows Azure deployments of DotNetNuke Community using virtual hard drive (cloud-drive) image that is created dynamically on the cloud. Enables the creation of new DotNetNuke host instances from on-premise to the cloud using a wizard that guides you on this process, creating the SQL Azure database, uploading the solution engine and associated service configurations. New features in this releaseModified the web roles endpoints to allow traffic on port 443 Changed the package unzip operati...Thales Simulator Library: Version 0.9.6: The Thales Simulator Library is an implementation of a software emulation of the Thales (formerly Zaxus & Racal) Hardware Security Module cryptographic device. This release fixes a problem with the FK command and a bug in the implementation of PIN block 05 format deconstruction. A new 0.9.6.Binaries file has been posted. This includes executable programs without an installer, including the GUI and console simulators, the key manager and the PVV clashing demo. Please note that you will need ...myManga: myManga v1.0.0.2: Fixed the 'Lost+Brain' error on MangaReader. The main download has this update. The second download is for those who have already downloaded the old v1.0.0.2. DELETE OLD EXE and DLLs before you copy the new files over.To update from v1.0.0.1:Extract new myManga EXE and DLLs from Zip to folder of choosing. Copy MangaInfo and MangaArchives folder from old myManga folder to new folder from step 1. ORDelete: The new myManga.exe contains the CoreMangaClasses.dll and Manga.dll internally. Delet...????: ????2.0.1: 1、?????。WiX Toolset: WiX v3.6 RC: WiX v3.6 RC (3.6.2928.0) provides feature complete Burn with VS11 support. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/5/28/WiX-v3.6-Release-Candidate-availableJavascript .NET: Javascript .NET v0.7: SetParameter() reverts to its old behaviour of allowing JavaScript code to add new properties to wrapped C# objects. The behavior added briefly in 0.6 (throws an exception) can be had via the new SetParameterOptions.RejectUnknownProperties. TerminateExecution now uses its isolate to terminate the correct context automatically. Added support for converting all C# integral types, decimal and enums to JavaScript numbers. (Previously only the common types were handled properly.) Bug fixe...Indent Guides for Visual Studio: Indent Guides v12: Version History Changed in v12: background document analysis new options dialog with Quick Set selections for behavior new "glow" style for guides new menu icon in VS 11 preview control now uses editor theming highlighting can be customised on each line fixed issues with collapsed code blocks improved behaviour around left-aligned pragma/preprocessor commands (C#/C++) new settings for controlling guides in empty lines restructured settings storage (should be more reliable) ...callisto: callisto 2.0.29: Added DNS functionality to scripting. See documentation section for details of how to incorporate this into your scripts.ZXMAK2: Version 2.6.2.2: - implemented read port #7FFD glitch for ULA128 (fusetest) - fix unhandled exception inside open dialog - fix Z80 format serializer (support 55 bytes header & non compressed 128 blocks - thanks to Ralf) This release include SPRINTER emulation, but boot system disk image was removed.Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (May 2012): Fixes: unserialize() of negative float numbers fix pcre possesive quantifiers and character class containing ()[] array deserilization when the array contains a reference to ISerializable parsing lambda function fix round() reimplemented as it is in PHP to avoid .NET rounding errors filesize bypass for FileInfo.Length bug in Mono New features: Time zones reimplemented, uses Windows/Linux databaseSharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.1): New fetures:Admin enable / disable match Hide/Show Euro 2012 SharePoint lists (3 lists) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...ScreenShot: InstallScreenShot: This is the current stable release.????SDK for .Net 4.0+(OAuth2.0+??V2?API): ??V2?SDK???: ????SDK for .Net 4.X???????PHP?SDK???OAuth??API???Client???。 ??????API?? ???????OAuth2.0???? ???：????????，DEMO??AppKey????????????????，?????AppKey，????AppKey???????????，?????“????>????>????>??????”.Net Code Samples: Code Samples: Code samples (SLNs).LINQ_Koans: LinqKoans v.02: Cleaned up a bitExpression Tree Visualizer for VS 2010: Expression Tree Visualizer Beta: This is a beta release, in this release some expression types are not handled and use a default visualization behavior. The first release will be published soon. Wait for it...Ulfi: Ulfi source: Build with Visual Studio 2010 Express C# or betterJayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.0 RC1 Refresh 2: JayData is a unified data access library for JavaScript developers to query and update data from different sources like webSQL, indexedDB, OData, Facebook or YQL. See it in action in this 6 minutes video: http://www.youtube.com/watch?v=LlJHgj1y0CU RC1 R2 Release highlights Knockout.js integrationUsing the Knockout.js module, your UI can be automatically refreshed when the data model changes, so you can develop the front-end of your data manager app even faster. Querying 1:N relations in W...Christoc's DotNetNuke Module Development Template: 00.00.08 for DNN6: BEFORE USE YOU need to install the MSBuild Community Tasks available from http://msbuildtasks.tigris.org For best results you should configure your development environment as described in this blog post Then read this latest blog post about customizing and using these custom templates. Installation is simple To use this template place the ZIP (not extracted) file in your My Documents\Visual Studio 2010\Templates\ProjectTemplates\Visual C#\Web OR for VB My Documents\Visual Studio 2010\Te...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.53: fix issue #18106, where member operators on numeric literals caused the member part to be duplicated when not minifying numeric literals ADD NEW FEATURE: ability to create source map files! The first mapfile format to be supported is the Script# format. Use the new -map filename switch to create map files when building your sources.New ProjectsActive Log Reader: The active log reader provides the ability for a client to subscribe to specific changes in a set of files in a directory. For example, it allows you to actively monitor all .log files in your C:\Windows directory (and sub-directories) and callback whenever the word "ERROR" shows up (or any regular expression you can come up with). The accompanying test project outlines example usage.ADO.NET light wrapper: ADO.NET light wrapper is thin IEnumerable layer about ADO.NET for provide easy way to access data with strong typing support. Allen Neighborhood Center: Allen Neighborhood Center data interactionsCildads: The first attempt at centryCMT: Course Management Tool ProjectCode Builder: this is the Builder project.Connect: this is the Connect project.Craig's Framework: A basic framework that is used to speed up building MVC applications and make certain things simpler.CRM 2011 Fetch XML Execute Tool: This is a dev tool used to execute fetch xml to get the results from the connected CRM 2011 instanceDallasDB: A struct based database. DallasDB will have no full functionality until at least version 0.0.1, and won't be ready for professional use until version 1.0.0. EasyMvc: It provides a trainning sample to develop a web application base on MVC3 EF4.0 SQL Compact 4. Besides, a common business permission, logging, configration have been applied simply. Share with some implement idea about web, mvc, jquery,orm. Appreciate your advice.Entity: this is the Entity project.FogLampz: FogLampz is a .NET wrapper around around the FogBugz API.Geeba: Geeba Forum for Students in BGU UniversityHibernate: this is the Hibernate project.JSense - IntelliSense for JavaScript: JSense provides JavaScript IntelliSense meta-automation for Visual Studio 2010 projectsMichael: this is Michael's project.ModAdder: Minecraft Mod InstallerMVVM ORM: The purpose of MVVM ORM is to create models and their interactions as defined in some database for WPF applications Models are derived from tables, views and stored procedures. Interactions include insert/update/delete, with FK relationships taken into account. nihao: The summary is required.Report: this is the Report project.REST Start Kit for BizTalk: This project enables BizTalk Server to expose RESTFul services through the WCF-Custom adapter. The library supports both receive and send, both XML and JSON with all HTTP verbs (GET, POST, PUT and DELETE). The solution is based on two custom WCF behaviors, one to be used on Receive Locations and one on Send Ports. Hopeully you'll find them easy to use, but if you have any issues, please use the discussions forum.RovignetaWinPhone7: bla bla blaScreenShot: A simple utility that enhances the experience of taking screenshots and annotating them. And all of it happens with the screenshot key that you are most used to. PrintScreen. Give it a try. You will forget the traditional tedious screenshot mechanism.SDM Exam 2012: This is an exam project for 4th semester.Struts: this is the Struts project.TheStoreDepot: depot for the StoreTibiaBot: TibiaBot is an open source application dedicated to extend your gaming experience in MMORPG game called Tibia. Besides of very many built-in functions, TibiaBot has implemented IronRuby script engine, which allows You to creating new functionality to base program.TopicInterDisciplinary: Topic inter-disciplinary owner: sherry, chen1984yangWebAppMatrix: ??WebApp??，?????！

Read the article

Granular Clipboard Control in Oracle IRM

- by martin.abrahams

One of the main leak prevention controls that customers are looking for is clipboard control. After all, there is little point in controlling access to a document if authorised users can simply make unprotected copies by use of the cut and paste mechanism. Oddly, for such a fundamental requirement, many solutions only offer very simplistic clipboard control - and require the customer to make an awkward choice between usability and security. In many cases, clipboard control is simply an ON-OFF option. By turning the clipboard OFF, you disable one of the most valuable edit functions known to man. Try working for any length of time without copying and pasting, and you'll soon appreciate how valuable that function is. Worse, some solutions disable the clipboard completely - not just for the protected document but for all of the various applications you have open at the time. Normal service is only resumed when you close the protected document. In this way, policy enforcement bleeds out of the particular assets you need to protect and interferes with the entire user experience. On the other hand, turning the clipboard ON satisfies a fundamental usability requirement - but also makes it really easy for users to create unprotected copies of sensitive information, maliciously or otherwise. All they need to do is paste into another document. If creating unprotected copies is this simple, you have to question how much you are really gaining by applying protection at all. You may not be allowed to edit, forward, or print the protected asset, but all you need to do is create a copy and work with that instead. And that activity would not be tracked in any way. So, a simple ON-OFF control creates a real tension between usability and security. If you are only using IRM on a small scale, perhaps security can outweigh usability - the business can put up with the restriction if it only applies to a handful of important documents. But try extending protection to large numbers of documents and large user communities, and the restriction rapidly becomes really unwelcome. I am aware of one solution that takes a different tack. Rather than disable the clipboard, pasting is always permitted, but protection is automatically applied to any document that you paste into. At first glance, this sounds great - protection travels with the content. However, at any scale this model may not be so appealing once you've had to deal with support calls from users who have accidentally applied protection to documents that really don't need it - which would be all too easily done. This may help control leakage, but it also pollutes the system with documents that have policies applied with no obvious rhyme or reason, and it can seriously inconvenience the business by making non-sensitive documents difficult to access. And what policy applies if you paste some protected content into an already protected document? Which policy applies? There are no prizes for guessing that Oracle IRM takes a rather different approach. The Oracle IRM Approach Oracle IRM offers a spectrum of clipboard controls between the extremes of ON and OFF, and it leverages the classification-based rights model to give granular control that satisfies both security and usability needs. Firstly, we take it for granted that if you have EDIT rights, of course you can use the clipboard within a given document. Why would we force you to retype a piece of content that you want to move from HERE... to HERE...? If the pasted content remains in the same document, it is equally well protected whether it be at the beginning, middle, or end - or all three. So, the first point is that Oracle IRM always enables the clipboard if you have the right to edit the file. Secondly, whether we enable or disable the clipboard, we only affect the protected document. That is, you can continue to use the clipboard in the usual way for unprotected documents and applications regardless of whether the clipboard is enabled or disabled for the protected document(s). And if you have multiple protected documents open, each may have the clipboard enabled or disabled independently, according to whether you have Edit rights for each. So, even for the simplest cases - the ON-OFF cases - Oracle IRM adds value by containing the effect to the protected documents rather than to the whole desktop environment. Now to the granular options between ON and OFF. Thanks to our classification model, we can define rights that enable pasting between documents in the same classification - ie. between documents that are protected by the same policy. So, if you are working on this month's financial report and you want to pull some data from last month's report, you can simply cut and paste between the two documents. The two documents are classified the same way, subject to the same policy, so the content is equally safe in both documents. However, if you try to paste the same data into an unprotected document or a document in a different classification, you can be prevented. Thus, the control balances legitimate user requirements to allow pasting with legitimate information security concerns to keep data protected. We can take this further. You may have the right to paste between related classifications of document. So, the CFO might want to copy some financial data into a board document, where the two documents are sealed to different classifications. The CFO's rights may well allow this, as it is a reasonable thing for a CFO to want to do. But policy might prevent the CFO from copying the same data into a classification that is accessible to external parties. The above option, to copy between classifications, may be for specific classifications or open-ended. That is, your rights might enable you to go from A to B but not to C, or you might be allowed to paste to any classification subject to your EDIT rights. As for so many features of Oracle IRM, our classification-based rights model makes this type of granular control really easy to manage - you simply define that pasting is permitted between classifications A and B, but omit C. Or you might define that pasting is permitted between all classifications, but not to unprotected locations. The classification model enables millions of documents to be controlled by a few such rules. Finally, you MIGHT have the option to paste anywhere - such that unprotected copies may be created. This is rare, but a legitimate configuration for some users, some use cases, and some classifications - but not something that you have to permit simply because the alternative is too restrictive. As always, these rights are defined in user roles - so different users are subject to different clipboard controls as required in different classifications. So, where most solutions offer just two clipboard options - ON-OFF or ON-but-encrypt-everything-you-touch - Oracle IRM offers real granularity that leverages our classification model. Indeed, I believe it is the lack of a classification model that makes such granularity impractical for other IRM solutions, because the matrix of rules for controlling pasting would be impossible to manage - there are so many documents to consider, and more are being created all the time.

Read the article

Arch Linux with an nginx/django setup refuses to display ANYTHING

- by Holland

I'm on Amazon Ec2, with an Arch Linux server. While I truly am loving it, I'm having the issue of actually getting nginx to display anything. Everytime I try to throw my hostname into the browser, the browser states that it's not available for some reason - almost as if the host doesn't even exist. One thing I'd like to know is, how can I get this up and running? Is there a specific arch linux configuration I have to do to make it web accessible? I have port 80 open, as well as port 22. I've tried using gunicorn, python-flup, and nginx. Nginx Config user http; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log logs/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; server { listen 80; server_name _; access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; #charset koi8-r; location ^~ /media/ { root /path/to/media; } location ^~ /admin-media/ { root /usr/lib/python2.7/site-packages/django/contrib/admin/media; } location / { root /path/to/root/; fastcgi_pass 127.0.0.1:8080; fastcgi_param SERVER_NAME $server_name; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param QUERY_STRING $query_string; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_pass_header Authorization; fastcgi_intercept_errors off; fastcgi_index index.html; index index.htm index.html; } error_page 500 502 503 504 /50x.html; location = /50x.html { root /etc/nginx/html/50x.html; } } # server { # listen 80; # server_name localhost; #charset koi8-r; #access_log logs/host.access.log main; # location / { # root html; # index index.html index.htm; # } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { root html; #} # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # #location ~ \.php$ { # root html; # fastcgi_pass 127.0.0.1:9000; # fastcgi_index index.php; # fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; # include fastcgi_params; #} # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} #} # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # location / { # root html; # index index.html index.htm; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # ssl_session_timeout 5m; # ssl_protocols SSLv2 SSLv3 TLSv1; # ssl_ciphers HIGH:!aNULL:!MD5; # ssl_prefer_server_ciphers on; # location / { # root html; # index index.html index.htm; # } #} } I can't quite tell if it's a server issue or a configuration issue: I've followed so many guides now I can't even count them all. The thing is that Django itself is working fine, and my permissions to the document root of the where the site files are stored is 777. Ontop of that, I have a git repo which works perfectly fine, and django, python, and runfcgi all start without issues. The same goes for gunicorn, when I do a gunicorn_django -b 0.0.0.0:8000 in my document root. Here is my output from that: 2012-04-15 05:17:37 [3124] [INFO] Starting gunicorn 0.14.2 2012-04-15 05:17:37 [3124] [INFO] Listening at: http://0.0.0.0:8081 (3124) 2012-04-15 05:17:37 [3124] [INFO] Using worker: sync 2012-04-15 05:17:37 [3127] [INFO] Booting worker with pid: 3127 As far as I know, everything seems fine, as well as error.log and access.log for nginx. The access log is completely blank, for that matter. I just feel lost here; what would be a step in the right direction to bebugging an issue such as this?

Read the article

Customize Your WordPress Blog & Build an Audience

- by Matthew Guay

Want to quickly give your blog a fresh coat of paint and make it stand out from the pack? Here’s how you can customize your WordPress blog and make it uniquely yours. WordPress offers many features that help you make your blog the best it can be. Although it doesn’t offer as many customization features as full WordPress running on your own server, it still makes it easy to make your free blog as professional or cute as you like. Here we’ll look at how you can customize features in your blog and build an audience. Personalize Your Blog WordPress make it easy to personalize your blog. Most of the personalization options are available under the Appearance menu on the left. Here we’ll look at how you can use most of these. Add New Theme WordPress is popular for the wide range of themes available for it. While you cannot upload your own theme to your blog, you can choose from over 90 free themes currently available with more added all the time. To change your theme, select the Themes page under Appearance. The Themes page will show random themes, but you can choose to view them in alphabetical order, by popularity, or how recently they were added. Or, you can search for a theme by name or features. One neat way to find a theme that suites your needs is the Feature Filter. Click the link on the right of the search button, and then select the options you want to make sure your theme has. Click Apply Filters and WordPress will streamline your choices to themes that contain these features. Once you find a theme you like, click Preview under its name to see how your blog will look. This will open a popup that shows your blog with the new theme. Click the Activate link in the top right corner of the popup if you want to keep this theme; otherwise, click the x in the top left corner to close the preview and continue your search for one you want. Edit Current Theme Many of the themes on WordPress have customization options so you can make your blog stand out from others using the same theme. The default theme Twenty Ten lets you customize both the header and background image, and many themes have similar options. To choose a new header image, select the Header page under Appearance. Select one of the pre-installed images and click Save Changes, or upload your own image. If you upload an image larger than the size for the header, WordPress will let you crop it directly in the web interface. Click Crop Header when you’ve selected the portion you want for the header of your blog. You can also customize your blog’s background from the Background page under Appearance. You can upload an image for the background, or can enter a hex value of a color for a solid background. If you’d rather visually choose a color, click Select a Color to open a color wheel that makes it easy to choose a nice color. Click Save Changes when you’re done. Note: that all themes may not contain these customization options, but many are flexible. You cannot edit the actual CSS of your theme on free WordPress blogs, but you you can purchase the Custom CSS Upgrade for $14.97/year to add this ability. Add Widgets With Extra Content Widgets are small addons for your blog, similar to Desktop Gadgets in Windows 7 or Dashboard widgets in Mac OS X. You can add widgets to your blog to show recent Tweets, favorite Flickr pictures, popular articles, and more. To add widgets to your blog, open the Widgets page under Appearance. You’ll see a variety of widgets available in the main white box. Select one you want to add, and drag it to the widget area of your choice. Different themes may offer different areas to place Widgets, such as the sidebar or footer. Most of the widgets offer configuration options. Click the down arrow beside its name to edit it. Set them up as you wish, and click Save on the bottom of the widget. Now we’ve got some nice dynamic content on our blog that’s automatically updated from the net. Choose Blog Extras By default, WordPress shows previews of websites when visitors hover over links on your blog, uses a special mobile theme when people visit from a mobile device, and shows related links to other blogs on the WordPress network at the end of your posts. If you don’t like these features, you can disable them on the Extras page under Appearance. Build Your Audience Now that your blog is looking nice, we can make sure others will discover it. WordPress makes it easy for you to make your site discoverable on search engines or social network, and even gives you the option to keep your site private if you’d prefer. Open the Privacy page under Tools to change your site’s visibility. By default, it will be indexed by search engines and be viewable to everyone. You can also choose to leave your blog public but block search engines, or you can make it fully private. If you choose to make your blog private, you can enter up to 35 usernames of people you want to be able to see it. Each private visitor must have a WordPress.com account so they can login. If you need more than 35 private members, you can upgrade to allow unlimited private members for $29.97/year. Then, if you do want your site visible from search engines, one of the best ways to make sure your content is discovered by search engines is to register with their webmaster tools. Once registered, you need to add your key to your site so the search engine will find and index it. On the bottom of the Tools page, WordPress lets you enter your key from Google, Bing, and Yahoo! to make sure your site is discovered. If you haven’t signed up with these tools yet, you can signup via the links on this page as well. Post Blog Updates to Social Networks Many people discover the sites they visit from friends and others via social networks. WordPress makes it easy to automatically share links to your content on popular social networks. To activate this feature, open the My Blogs page under Dashboard. Now, select the services you want to activate under the Publicize section. This will automatically update Yahoo!, Twitter, and/or Facebook every time you publish a new post. You’ll have to authorize your connection with the social network. With Twitter and Yahoo!, you can authorize them with only two clicks, but integrating with Facebook will take several steps. If you’d rather share links yourself on social networks, you can get shortened URLs to your posts. When you write a new post or edit an existing one, click the Get Shortlink button located underneath the post’s title. This will give you a small URL, usually 20 characters or less, that you can use to post on social networks such as Twitter. This should help build your traffic, and if you want to see how many people are checking out your site, check out the stats on your Dashboard. This shows a graph of how many people are visiting, and popular posts. Click View All if you’d like more detailed stats including search engine terms that lead people to your blog. Conclusion Whether you’re looking to make a private blog for your group or publish a blog that’s read by millions around the world, WordPress is a great way to do it for free. And with all of the personalization options, you can make your it memorable and exciting for your visitors. If you don’t have a blog, you can always signup for a free one from WordPress.com. Also make sure to check out our article on how to Start Your Own Blog with WordPress. Similar Articles Productive Geek Tips Manage Your WordPress Blog Comments from Your Windows DesktopAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogHow-To Geek SoftwareMake a Backup Copy of your Production Wordpress Blog on UbuntuOops! Sorry About the Feed Errors TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010

Search Results

Search found 19115 results on 765 pages for 'region specific'.

Page 735/765 | < Previous Page | 731 732 733 734 735 736 737 738 739 740 741 742 | Next Page >

- by Halfgaar

- by Renso

- by Rick Strahl

- by Ajarn Mark Caldwell

- by heavymark

- by psheriff

- by trond-arne.undheim

- by Glav

- by Jani Rautiainen

- by Jeff Victor

- by Chris Hoffman

- by zensys

- by user94156

- by Rick Strahl

- by Chris Hoffman

- by david

- by user12626122

- by igor

- by Manca Weeks

- by Mladen Prajdic

- by martin.abrahams

- by Holland

- by Matthew Guay

< Previous Page | 731 732 733 734 735 736 737 738 739 740 741 742 | Next Page >