Search Results

Search found 41497 results on 1660 pages for 'fault'.

Page 738/1660 | < Previous Page | 734 735 736 737 738 739 740 741 742 743 744 745  | Next Page >

• Securing DRAC/ILO

  - by The Diamond Z

  This might be a dumb question but DRAC/ILO both have HTTP server interfaces. If I were trolling IP's port 80 on and I came across such a page I'd know it to be a high value target in the sense that if I can crack it, I can take control of the server to some extent (potentially installing another OS). Other than changing the port, what are the best practices for securing DRAC/ILO on public Internet facing machines?

  Read the article

• NIC light is turned off after boot on Redhat 4.6 server

  - by hoffmandirt

  I have a 2950 blade server setup with Red Hat 4.6 installed. I cannot get the NIC to work properly after reinstalling Linux. I activated the NIC, but the NIC light will not turn on when I plug the network cable into the hub. The status light on the hub will not turn on either. If I run ifconfig, the NIC status is UP. Also I can ping the IP address that I assign to the Linux machine, but I can't ping anything else that is plugged into the hub. When I reboot the system, the NIC light will stay on until the system fully boots and then it will turn off again. Is there something else that I need to do to get the NIC working? It appears to be disabled even though ifconfig says that it is UP. Maybe I need to configure something within the blade server (iDRAC)?

  Read the article

• How can I increase the size of a Windows 2003 NTFS partition?

  - by waszkiewicz

  Hi everybody! I have a very important server running Windows Server 2003 and my System partition is becoming too small, it's slowing down the machine. I have already tried all the cleaning stuff and transferring some "unimportant softs" on the "Saves" partition but it didn't help much at all. Is there a way to re-partition my hard-drive that will work on a 2003 Server, that's not too expensive and that could be used without turning the machine off. If there is no other way, then I'll have to reinstall the OS, but it will have to wait for the weekend. Thanks for your suggestions.

  Read the article

• Weird behaviour with OpenVPN: can not connect to a few websites

  - by Gaby Solis

  My OpenVPN server is Ubuntu 10.04.4 LTS and openvpn version is 2.x My client is on Win 7. He can access most sites but not Youtube, Facebook, Twitter, groups.google.com, etc My server.conf is: local x.x.x.x port 1194 proto udp dev tun ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key dh /etc/openvpn/keys/dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status /etc/openvpn/keys/openvpn-status.log verb 4 I can access Youtube etc using SSH Tunnel + SOCKS Proxy, and the Ubuntu server can access all sites. so nothing is wrong with the Ubuntu server. With little information I can provide, I am not looking for a quck solution. How can I debug?

  Read the article

• Windows Hosted Network Redirect to IIS

  - by rulestein

  I would like to setup a Windows 7 machine as a wifi hotspot that always redirects to the IIS web hosting on the same machine. I have the hotspot piece working with the built in hosted network of Widnows 7. The webhosting was easy enough with IIS. Now, how do I connect the 2? The idea is to have a standalone device that users will be able to connect to the wifi and any webpage they go to will redirect to the internal webpage. I only expect 1 or 2 users at a time and there won't be any internet access involved.

  Read the article

• .htaccess - Too many redirects

  - by Knocks X

  I am getting a "too many redirects" error from the following two .htaccess files. .htaccess on domain 1 Redirect 301 / http://www.domain2.com/ .htaccess on domain 2 RewriteEngine On RewriteBase / RewriteCond %{HTTP_HOST} !^www\. RewriteRule (.*) http://www.%{HTTP_HOST}/$1 [L,R] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule .* /forum/ [L,R] RedirectMatch permanent ^/$ /forum/ # Options +FollowSymlinks RewriteCond %{HTTP_REFERER} badsite1\.com [NC,OR] RewriteCond %{HTTP_REFERER} badsite2\.com [NC] RewriteRule .* - [F] Anyone know the reason for the too many redirects error?

  Read the article

• Installing XAMPP on Mac OS X as a daemon ( service )

  - by Petruza

  Until now, I've been running Xampp by having a script with xampp start run as a login item. Is there a better way to make Xampp ( Apache & MySQL ) run as daemons?

  Read the article

• What does this error mean in my IIS7 Failed Request Tracing report?

  - by Pure.Krome

  Hi folks, when I attempt to goto any page in my web application (i'm migrating the code from an asp.net web site to web application, and now testing it) .. i keep getting some not authenticated error(s) . So, i've turned on FREB and this is what it says... I'm not sure what that means? Secondly, i've also made sure that my site (or at least the default document which has been setup to be default.aspx) has anonymous on and the rest off. Proof: - C:\Windows\System32\inetsrv>appcmd list config "My Web App/default.aspx" -section:anonymousAuthentication <system.webServer> <security> <authentication> <anonymousAuthentication enabled="true" userName="IUSR" /> </authentication> </security> </system.webServer> C:\Windows\System32\inetsrv>appcmd list config "My Web App" -section:anonymousAuthentication <system.webServer> <security> <authentication> <anonymousAuthentication enabled="true" userName="IUSR" /> </authentication> </security> </system.webServer> Can someone please help?

  Read the article

• Increase Timeout for remote sessions in Debian 5 Lenny

  - by Ash

  I always get a remote connection time out when using PuTTy and also when i send emails with attachments from a mail sever installed on Debian. I always get this error. I'm not sure if this is firewall or the new Debian 5 installation which i made. Is there any settings i need to fix after fresh install. Any inputs are highly appreciated. This error is pulling my brains out. Thanks. Error: 2011-01-10 15:21:13,454 INFO [btpool0-23://69.19.19.89/service/upload?fmt=extended] [[email protected];mid=72;ip=10.10.01.78;ua=Mozilla/5.0 (Windows;; U;; Windows NT 5.2;; en-US;; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13 (.NET CLR 3.5.30729);] FileUploadServlet - File upload failed org.apache.commons.fileupload.FileUploadBase$IOFileUploadException: Processing of multipart/form-data request failed. timeout at org.apache.commons.fileupload.FileUploadBase.parseRequest(FileUploadBase.java:367) at org.apache.commons.fileupload.servlet.ServletFileUpload.parseRequest(ServletFileUpload.java:126) at com.zimbra.cs.service.FileUploadServlet.handleMultipartUpload(FileUploadServlet.java:430) at com.zimbra.cs.service.FileUploadServlet.doPost(FileUploadServlet.java:412) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at com.zimbra.cs.servlet.ZimbraServlet.service(ZimbraServlet.java:181) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:511) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1166) at com.zimbra.cs.servlet.SetHeaderFilter.doFilter(SetHeaderFilter.java:79) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1157) at org.mortbay.servlet.UserAgentFilter.doFilter(UserAgentFilter.java:81) at org.mortbay.servlet.GzipFilter.doFilter(GzipFilter.java:132) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1157) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:388) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:218) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:182) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:418) at org.mortbay.jetty.handler.ContextHandlerCollection.handle(ContextHandlerCollection.java:230) at org.mortbay.jetty.handler.HandlerCollection.handle(HandlerCollection.java:114) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.handler.rewrite.RewriteHandler.handle(RewriteHandler.java:230) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.handler.DebugHandler.handle(DebugHandler.java:77) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.Server.handle(Server.java:326) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:543) at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:939) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:755) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:218) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:405) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:413) at org.mortbay.thread.BoundedThreadPool$PoolThread.run(BoundedThreadPool.java:451) Caused by: org.mortbay.jetty.EofException: timeout at org.mortbay.jetty.HttpParser$Input.blockForContent(HttpParser.java:1172) at org.mortbay.jetty.HttpParser$Input.read(HttpParser.java:1122) at org.apache.commons.fileupload.MultipartStream$ItemInputStream.makeAvailable(MultipartStream.java:977) at org.apache.commons.fileupload.MultipartStream$ItemInputStream.read(MultipartStream.java:887) at java.io.InputStream.read(InputStream.java:85) at org.apache.commons.fileupload.util.Streams.copy(Streams.java:94) at org.apache.commons.fileupload.util.Streams.copy(Streams.java:64) at org.apache.commons.fileupload.FileUploadBase.parseRequest(FileUploadBase.java:362) ... 33 more

  Read the article

• How to configure fastcgi with lighttpd

  - by silverburgh

  Hi, I am trying to configure FastCgi with ligttpd server. I was able to run vanilla lighttpd like this: ./lighttpd -f lighttpd.conf And then I compile/install the source of fastcgi, and I add the following in my lighttpd.conf: fastcgi.server = ( "/fastcgi_scripts/" => (( #"host" => "127.0.0.1", #"port" => 9091, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", "docroot" => "/" # remote server may use # it's own docroot )) ) But lighttpd won't start after I add the above. Can you please tell me how can I run fastcgi with lighttpd? I want to use a c program with fastcgi with lighttpd. Thank you.

  Read the article

• Cisco ASA user authentication options - OpenID, public RSA sig, others?

  - by Ryan

  My organization has a Cisco ASA 5510 which I have made act as a firewall/gateway for one of our offices. Most resources a remote user would come looking for exist inside. I've implemented the usual deal - basic inside networks with outbound NAT, one primary outside interface with some secondary public IPs in the PAT pool for public-facing services, a couple site-to-site IPSec links to other branches, etc. - and I'm working now on VPN. I have the WebVPN (clientless SSL VPN) working and even traversing the site-to-site links. At the moment I'm leaving a legacy OpenVPN AS in place for thick client VPN. What I would like to do is standardize on an authentication method for all VPN then switch to the Cisco's IPSec thick VPN server. I'm trying to figure out what's really possible for authentication for these VPN users (thick client and clientless). My organization uses Google Apps and we already use dotnetopenauth to authenticate users for a couple internal services. I'd like to be able to do the same thing for thin and thick VPN. Alternatively a signature-based solution using RSA public keypairs (ssh-keygen type) would be useful to identify user@hardware. I'm trying to get away from legacy username/password auth especially if it's internal to the Cisco (just another password set to manage and for users to forget). I know I can map against an existing LDAP server but we have LDAP accounts created for only about 10% of the user base (mostly developers for Linux shell access). I guess what I'm looking for is a piece of middleware which appears to the Cisco as an LDAP server but will interface with the user's existing OpenID identity. Nothing I've seen in the Cisco suggests it can do this natively. But RSA public keys would be a runner-up, and much much better than standalone or even LDAP auth. What's really practical here?

  Read the article

• NLB Accessed Denied from second server

  - by Igor K

  Hello Have NLB set up and working. Just two servers, web1 and web2. I set up NLB on web1 and can view both machines as Converged. (I had to specify a login/pass to connect to web2). On web2, looking at the NLB Manager, it only shows web2 and says in the log "Accessed Denied. Error connecting to web1". Any ideas how to fix?

  Read the article

• Dump SQL Server Stored Procedures to Files

  - by Jake Wharton

  Is there a non-interactive (read: script-able) way to dump all stored procedures to disk? We keep versions of our stored procedures in the repository to track changes and for deployment and rollback purposes. Currently whenever we want to modify a stored procedure you have to pull it out of the DB directly when you begin your change.

  Read the article

• Transparent proxying in MacOS X 10.6 Snow Leopard (and maybe FreeBSD)

  - by apenwarr

  I'm trying to create a transparent proxy on my MacOS machine in order to port the sshuttle ssh-based transproxy VPN from Linux. I think I almost have it working, but sadly, almost is not 100%. Short version is this. In one window, start something that listens on port 12300: $ while :; do nc -l 12300; done Now enable proxying: # sysctl -w net.inet.ip.forwarding=1 # sysctl -w net.inet.ip.fw.enable=1 # ipfw add 1000 fwd 127.0.0.1,12300 log tcp from any to any And now test it out: $ telnet localhost 9999 # any port number will do # this works; type stuff and you'll see it in the nc window $ telnet google.com 80 # any host/port will do # this *doesn't* work! After the latter experiment, I see lines like this in netstat: $ netstat -tn | grep ^tcp4 tcp4 0 0 66.249.91.104.80 192.168.1.130.61072 SYN_RCVD tcp4 0 0 192.168.1.130.61072 66.249.91.104.80 SYN_SENT The second socket belongs to my telnet program; the first is more suspicious. SYN_RCVD implies that my SYN packet was correctly captured by the firewall and taken in by the kernel, but apparently the SYNACK was never sent back to telnet, because it's still in SYN_SENT. On the other hand, if I kill the nc server, I get this: $ telnet google.com 80 Trying 66.249.81.104... telnet: connect to address 66.249.81.104: Connection refused telnet: Unable to connect to remote host ...which is as expected: my proxy server isn't running, so ipfw redirects my connection to port 12300, which has nobody listening on it, ie. connection refused. My uname says this: $ uname -a Darwin mean.local 10.2.0 Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386 i386 Does anybody see any different results? (I'm especially interested in Snow Leopard vs Leopard results, as there seem to be some internet rumours that transproxy is broken in Snow Leopard version) Any advice for how to fix?

  Read the article

• Assistance on setup to Connect an offsite server to the LAN via RRAS VPN - Server 2008 R2

  - by Paul D'Ambra

  I have an office LAN protected using a Zyxel Zywall USG 300. I've set up an L2TP/ipsec VPN on that which accepts connections using a shared secret and I've tested this from multiple clients. I have a server offsite and want to set up RRAS to use a persistent connection to the VPN so that it can carry out network jobs even with no one logged in (I'm using it for Micorosft DPM secondary backup). If I create a vpn as if I were setting up a users laptop it can dial in no problem but if I set up a demand dial interface in RRAS it errors. I enable RRAS ticking only demand dial interface (branch office routing) Select network interfaces, right click and choose new demand dial interface Name the VPN ToCompany Select connect using VPN And then L2TP as the vpn type enter the IP address (double-checked for typos!) select Route IP packets on this interface specify static route to remote network as 10.0.0.0/24 with metric of 1 add dial out credentials (again double checked for typos and confirmed with other vpn connections click finish now I right-click on the new interface and choose properties and then the security tab I change Data encryption to optional select only PAP for Authentication (both as per manufacturer of Zywall) click advanced settings against type of vpn and set shared secret then I select the new interface, right-click and choose connect this dials and then errors with either 720 or 811 as the error codes. However, if I create a VPN by going to Network & Sharing center and setting up as if I was creating a VPN from my laptop to the office (say) it dials successfully so I know the VPN settings are correct and the machine can connect to the VPN. Suggests very strongly the problem is how I'm setting up RRAS. Can anyone help?

  Read the article

• iptables-restore: line 1 failed

  - by Doug

  Hello, I am new to servers, and I was following this guide and it failed on the first command instructed. Could anyone give me a hand? http://wiki.debian.org/iptables ~ZORO~:/etc# iptables-restore < /etc/iptables.test.rules iptables-restore: line 1 failed Edit: iptables.test.rules ~ZORO~:/etc# cat /etc/iptables.test.rules *filter # Allows all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT -i ! lo -d 127.0.0.0/8 -j REJECT # Accepts all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allows all outbound traffic # You could modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allows HTTP and HTTPS connections from anywhere (the normal ports for websites) -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT # Allows SSH connections for script kiddies # THE -dport NUMBER IS THE SAME ONE YOU SET UP IN THE SSHD_CONFIG FILE -A INPUT -p tcp -m state --state NEW --dport 30000 -j ACCEPT # Now you should read up on iptables rules and consider whether ssh access # for everyone is really desired. Most likely you will only allow access from certain IPs. # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # log iptables denied calls (access via 'dmesg' command) -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy: -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT

  Read the article

• Blue Screen at booting Windows 2000 virtual

  - by darkdog

  well i hope this stackexchange site is the right for my issue. I've an Oracle VirtualBox running on some acer pc Settings for the Acer PC: Windows 7 SP1 64bit Intel G630 @ 2.7Ghz 2GB RAM i used a .vhd image which contains a windows 2000 system with some preconfigured stuff and software for a customer. At the Windows boot time immediately after the "Loading Windows 2000..." - Screen i get the following Error: Sorry for the German Text but it say's something like "Check the Size of your HDD. If the error contains a driver, deactivate it and try again. Or change the graficcard" The HDD Size shouldn't be a problem in my honest opinion. Can anyone give me an adivce what i can try to do? I just tested the same combination of the .vhd image and oracle virtualbox on another computer. Same issue. Greetings

  Read the article

• Ubuntu Startup xsp4

  - by Chin Ye

  when i type in terminal command are working fine root@syscomp:/var/www/WebSite2# xsp4 xsp4 Listening on address: 0.0.0.0 Root directory: /var/www/WebSite2 Listening on port: 9000 (non-secure) Hit Return to stop the server. but i m using script in /etc/init/GPS_WebSite.conf when the script are running fine, but not running in background when the script run one time and then closed, that is why my mono server are not running all the time, this is my GPS_WebSite.conf script, what i need to change to be running forever in background? start on login-session-start script exec > /tmp/debug-my-script.txt 2>&1 sleep 10 cd /var/www/WebSite2 xsp4 end script

  Read the article

• IIS/ASP.NET performance incident - Perfmon Current Annonymous Users going through roof but Requests/sec low

  - by Laurence

  Setup: ASP.NET 4.0 website on IIS 6.0 on Win 2003 64 bit, 8xCPUs, 16GB memory, separate SQL 2005 DB server. Had a serious slowdown today with any otherwise fairly well performing ASP.NET site. For a period of a couple of hours all page requests were taking a very long time to be served - e.g. 30-60s compared to usual 2s. The w3wp.exe's CPU and memory usage on the webserver was not much higher than normal. The application pool was not in the middle of recycling (and it hadn't recycled for several hours). Bottlenecks in the database were ruled out - no blocks occurring and query results were being returned quickly. I couldn't make any sense of it and set up the following Perfmon counters: Current Anonymous Users (for site in question) Get requests/sec (ditto) Requests/sec for the ASP.NET application running the site Get requests/sec was averaging 100-150. Requests/sec for ASP.NET was averaging 5-10. However Current Anonymous Users was around 200. And then as I was watching, the Current Anonymous Users began to climb steeply going up to about 500 within a few minutes. All this time Get requests/sec & Requests/sec for ASP.NET was if anything going down. I did a whole load of things (in a panic!) to try to get the site working, like shutting it down, recycling the app pool, and adding another worker process to the pool. I also extended the expiration time for content (in IIS under HTTP Headers) in an attempt to lower the number of requests for static files (there are a lot of images on the site). The site is now back to normal, and the counters are fairly steady and reading (added Current Connections counter): Current Anonymous Users : average 30 Get requests/sec : average 100 Requests/sec for ASP.NET : 5 Current Connections : average 300 I have also observed an inverse relationship between Get requests/sec & Current Anonymous Users. Usually both are fairly steady but there will be short periods when Get requests/sec will go down dramatically and Current Anonymous Users will go up in a perfect mirror image. Then they will flip back to their usual levels. So, my questions are: Thinking of the original performance issue - if w3wp.exe CPU, memory usage were normal and there was no DB bottleneck, what could explain page requests taking 20 times longer to be served than usual? What other counters should I be looking at if this happens again? What explains the inverse relationship between Get requests/sec & Current Anonymous Users? What could explain Current Anonymous Users going from 200 to 500 within a few minutes? Many thanks for any insight into this.

  Read the article

• MySQL unstable behavior with external stroge

  - by onurozcelik

  In our project we are using MySQL 5.0.90(InnoDB engine) server with an external storage. We store MySQL data files in an external storage. When the external storage down for a reason we have unstable behaviours. So we made some tests. In Windows Server 2008 We closed external storage physically. MySQL service stoped and we could not reach the server. Then we opened the storage unit and we could not start service until we reconfigured MySQL. We made storage unit offline from operating system. After 3-4 minutes and some insert trials(some insert trials succeded) MySQL service stoped and we could not reach the server. Then we made storage unit online and we could start the service(not automatically). In Windows Server 2003 We made storage unit offline. After 3-4 minutes and some insert trials(some insert trials succeded) MySQL service stoped and we could not reach the server. Then we made storage unit online we could not start the service until we reinstalled MySQL. Before reinstall we tried to reconfigure but it did not work. We closed external storage physically. MySQL service stoped and we could not reach the server. After that we opened the storage unit and we could start service(not automatically) We expect service to autostart after storage unit is online/open. But these tests show unstable behaviors. Is there any solutions to this.

  Read the article

• KVM error with device pass through

  - by javano

  I am running the following command booting a Debian live CD passing a host PCI device to the guest as a test and KVM errors out; kvm -m 512 -boot c -net none -hda /media/AA502592502565F3/debian.iso -device pci-assign,host=07:00.0 PCI region 1 at address 0xf7920000 has size 0x80, which is not a multiple of 4K. You might experience some performance hit due to that. No IOMMU found. Unable to assign device "(null)" kvm: -device pci-assign,host=07:00.0: Device 'pci-assign' could not be initialized lspci | grep 07 07:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) I shoved an old spare NIC into my motherboard to test PCI pass through. I have searched the Internet with Goolge and found that errors relating to "No IOMMU found" often mean the PCI device is not supported by KVM. Does KVM have to support the device being "passed-through"? I though the point was to pass the device through and let the guest worry about it? Ultimately I want to pass-through a PCI random number generator, is this not going to be possible with KVM? Thank you.

  Read the article

• Commercial version of Freenet6

  - by grnbeagle

  I've been using Freenet6 from gogoNET to make my mobile device publicly accessible via IPv6. It works quite well except that the service is not as stable because it's non-commercial usage only as their servers are hosted for free by different operators around the world. Apparently gogoNET sells hardware called gogoSERVER which allows one to build a service similar to Freenet6. I've inquired their sales team, but they were unable to tell me which companies have a commercial, production-quality implementation of Freenet6. Specifically I'm looking for the following features in IPv6 service provider: Client-based IPv6 connectivity for mobile devices: gogoCLIENT (gw6c) is ideal for mobile devices since it allows a device to go online regardless of the device's location. API for account maintenance: so that we can create device accounts from our software Static IPv6 address: (or maybe I mean IPv4 address) by this I mean, just like gogoNET6 service (username.broker.freenet6.net), we want to provide our users with a permanent URL for their device Any info on commercial IPv6 service provider utilizing gogoSERVER is appreciated. Thanks.

  Read the article

• FTP in DMZ, TCP Ports for LDAP Auth

  - by sam

  szenario: (outside)---(ASA5510)---(inside) -Windows2008 DC .....................(dmz) ..........-Win2008 FTP Server Which Ports do I need to open from DMZ-Inside that FTP Users can authentificated on the Inside DC? I have allready opend 389 (Ldap), 636 (secure Ldap) and 53 (dns). But the ftp Client stucks allways after processing the credentials and the FTP Server gives you an eventlog "logon error". the error messages indicates that there could be an issue with closed ports. if I turn the ACL to "IP", that means all ports are open, everything is working fine.

  Read the article

• Configuration of Sonicwall Load Balancing

  - by jacke672

  We installed a Sonicwall NSA 240 appliance and have configured it up for our SSL VPN connection and for load balancing with 2 ADSL lines. Over the past week, I have been testing the load balancing options to optimize the connection speeds for our users - but I've run into the following: Round Robin load balancing is the ideal load balancing setting and it's roughly doubling our throughput- but, when it's active users are unable to access any SSL enabled websites such as banking, web-mail, etc. For this reason, I have been using percentage based balancing as it allows me to enable source and destination IP binding, which doesn't 'break' any secure connections but were left with the slow connection speeds we had before adding the second line. I'm looking for a method in which we can take advantage of the round robin connection speeds while allowing users to access sites with SSL certificates, all while still allowing our remote (vpn) users to connect. Any help would be appreciated. Thanks

  Read the article

• How to tell credentials used for a Network Mapping?

  - by shanecourtrille

  I have a networking mapping that doesn't appear to work. When I connect to the mapping I get access denied when I try to create a folder. When I created the mapping I told it to login as another account. I have verified that account has the proper rights on the server side of things. How can I verify that my local machine is connecting with the right credentials?

  Read the article

< Previous Page | 734 735 736 737 738 739 740 741 742 743 744 745  | Next Page >