Search Results

Search found 20045 results on 802 pages for 'reporting services 2005'.

Page 739/802 | < Previous Page | 735 736 737 738 739 740 741 742 743 744 745 746  | Next Page >

  • Sharepoint OLE DB - cannot insert records? "Field not updateable" error

    - by Pandincus
    I need to write a simple C# .NET application to retrieve, update, and insert some data in a Sharepoint list. I am NOT a Sharepoint developer, and I don't have control over our Sharepoint server. I would prefer not to have to develop this in a proper sharepoint development environment simply because I don't want to have to deploy my application on the Sharepoint server -- I'd rather just access data externally. Anyway, I found out that you can access Sharepoint data using OLE DB, and I tried it successfully using some ADO.NET: var db = DatabaseFactory.CreateDatabase(); DataSet ds = new DataSet(); using (var command = db.GetSqlStringCommand("SELECT * FROM List")) { db.LoadDataSet(command, ds, "List"); } The above works. However, when I try to insert: using (var command = db.GetSqlStringCommand("INSERT INTO List ([HeaderName], [Description], [Number]) VALUES ('Blah', 'Blah', 100)")) { db.ExecuteNonQuery(command); } I get this error: Cannot update 'HeaderName'; field not updateable. I did some Googling and apparently you cannot insert data through OLE DB! Does anyone know if there are some possible workarounds? I could try using Sharepoint Web Services, but I tried that initially and was having a heck of a time authenticating. Is that my only option?

    Read the article

  • Informational messages returned with WCF involved

    - by DT
    This question is about “informational messages” and having them flow from a “back end” to a “front end” in a consistent manner. The quick question is “how do you do it”? Background: Web application using WCF to call back end services. In the back end service a “message” may occur. Now, the reason for this “message” may be a number of reasons, but for this discussion let’s assume that a piece of data was looked at and it was determined that the caller should be given back some information regarding it. This “informational” message may occur during a save and also may occur during retrieval of information. Again, the message is not what is important here, but the fact that there is some informational messages to give back under a number of different scenarios. From a team perspective we all want to return these “messages” in a standard way all of the time. Now, in the past this “standard way” has been done different ways by different people. Here are some possibilities: 1) Every operation has a “ref” parameter at the end that contains these messages 2) Every method returns these messages… however, this only kind of works for “Save” methods as one would think that “Retrieve” methods should return actual data and not messages 3) Some approach using the call context so as to not "pollute" all message signatures with something; however, with WCF in the picture this complicates things. That is, going back to the messages go on a header? Question: Back to my question then… how are others returning “messages” such as what was described above back through tiers of an application, over WCF and back to the caller?

    Read the article

  • Triggering PHP from ActiveMQ

    - by scompt.com
    Background: Our current system involves two services (one written in Java, the other in PHP) that communicate with each other using HTTP callbacks. We would like to migrate from HTTP callbacks to a message-based architecture using ActiveMQ (or another, if necessary). We'll probably use STOMP to communicate between them. Eventually, the PHP service will be rewritten in Java, but that's not part of this project. Question: How can the ActiveMQ system notify PHP that a new message has been posted to the queue that the PHP system is subscribed to? In the current system, the callback inherently calls into the PHP and triggers it. This goes away with a message-based architecture. Possible solutions: Cron regularly calls a PHP script that checks for new messages. yuck. A long-running PHP process that loops and sleeps and checks for new messages. less yuck? ActiveMQ calls a PHP script when a new message is posted. good, how? ??

    Read the article

  • Test-Driven Development Problem

    - by Zeck
    Hi guys, I'm newbie to Java EE 6 and i'm trying to develop very simple JAX-RS application. RESTfull web service working fine. However when I ran my test application, I got the following. What have I done wrong? Or am i forget any configuration? Of course i'm create a JNDI and i'm using Netbeans 6.8 IDE. In finally, thank you for any advise. My Entity: @Entity @Table(name = "BOOK") @NamedQueries({ @NamedQuery(name = "Book.findAll", query = "SELECT b FROM Book b"), @NamedQuery(name = "Book.findById", query = "SELECT b FROM Book b WHERE b.id = :id"), @NamedQuery(name = "Book.findByTitle", query = "SELECT b FROM Book b WHERE b.title = :title"), @NamedQuery(name = "Book.findByDescription", query = "SELECT b FROM Book b WHERE b.description = :description"), @NamedQuery(name = "Book.findByPrice", query = "SELECT b FROM Book b WHERE b.price = :price"), @NamedQuery(name = "Book.findByNumberofpage", query = "SELECT b FROM Book b WHERE b.numberofpage = :numberofpage")}) public class Book implements Serializable { private static final long serialVersionUID = 1L; @Id @Basic(optional = false) @Column(name = "ID") private Integer id; @Basic(optional = false) @Column(name = "TITLE") private String title; @Basic(optional = false) @Column(name = "DESCRIPTION") private String description; @Basic(optional = false) @Column(name = "PRICE") private double price; @Basic(optional = false) @Column(name = "NUMBEROFPAGE") private int numberofpage; public Book() { } public Book(Integer id) { this.id = id; } public Book(Integer id, String title, String description, double price, int numberofpage) { this.id = id; this.title = title; this.description = description; this.price = price; this.numberofpage = numberofpage; } public Integer getId() { return id; } public void setId(Integer id) { this.id = id; } public String getTitle() { return title; } public void setTitle(String title) { this.title = title; } public String getDescription() { return description; } public void setDescription(String description) { this.description = description; } public double getPrice() { return price; } public void setPrice(double price) { this.price = price; } public int getNumberofpage() { return numberofpage; } public void setNumberofpage(int numberofpage) { this.numberofpage = numberofpage; } @Override public int hashCode() { int hash = 0; hash += (id != null ? id.hashCode() : 0); return hash; } @Override public boolean equals(Object object) { // TODO: Warning - this method won't work in the case the id fields are not set if (!(object instanceof Book)) { return false; } Book other = (Book) object; if ((this.id == null && other.id != null) || (this.id != null && !this.id.equals(other.id))) { return false; } return true; } @Override public String toString() { return "com.entity.Book[id=" + id + "]"; } } My Junit test class: public class BookTest { private static EntityManager em; private static EntityManagerFactory emf; public BookTest() { } @BeforeClass public static void setUpClass() throws Exception { emf = Persistence.createEntityManagerFactory("E01R01PU"); em = emf.createEntityManager(); } @AfterClass public static void tearDownClass() throws Exception { em.close(); emf.close(); } @Test public void createBook() { Book book = new Book(); book.setId(1); book.setDescription("Mastering the Behavior Driven Development with Ruby on Rails"); book.setTitle("Mastering the BDD"); book.setPrice(25.9f); book.setNumberofpage(1029); em.persist(book); assertNotNull("ID should not be null", book.getId()); } } My persistence.xml jta-data-sourceBookstoreJNDI And exception is: May 7, 2009 11:10:37 AM org.hibernate.validator.util.Version INFO: Hibernate Validator bean-validator-3.0-JBoss-4.0.2 May 7, 2009 11:10:37 AM org.hibernate.validator.engine.resolver.DefaultTraversableResolver detectJPA INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver. [EL Info]: 2009-05-07 11:10:37.531--ServerSession(13671123)--EclipseLink, version: Eclipse Persistence Services - 2.0.0.v20091127-r5931 May 7, 2009 11:10:40 AM com.sun.enterprise.transaction.JavaEETransactionManagerSimplified initDelegates INFO: Using com.sun.enterprise.transaction.jts.JavaEETransactionManagerJTSDelegate as the delegate May 7, 2009 11:10:43 AM com.sun.enterprise.connectors.ActiveRAFactory createActiveResourceAdapter SEVERE: rardeployment.class_not_found May 7, 2009 11:10:43 AM com.sun.enterprise.connectors.ActiveRAFactory createActiveResourceAdapter SEVERE: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:104) at com.sun.enterprise.connectors.service.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:216) at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:352) at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:106) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at com.sun.enterprise.naming.impl.SerialContext.getObjectInstance(SerialContext.java:472) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:437) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:569) at javax.naming.InitialContext.lookup(InitialContext.java:396) at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:110) at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:94) at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162) at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:584) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:228) at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:368) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.getServerSession(EntityManagerFactoryImpl.java:151) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:207) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:195) at com.entity.BookTest.setUpClass(BookTest.java:31) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:44) at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:15) at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:41) at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:27) at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31) at org.junit.runners.ParentRunner.run(ParentRunner.java:220) at junit.framework.JUnit4TestAdapter.run(JUnit4TestAdapter.java:39) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.run(JUnitTestRunner.java:515) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.launch(JUnitTestRunner.java:1031) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.main(JUnitTestRunner.java:888) Caused by: java.lang.ClassNotFoundException: com.sun.gjc.spi.ResourceAdapter at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:96) ... 32 more [EL Severe]: 2009-05-07 11:10:43.937--ServerSession(13671123)--Local Exception Stack: Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.0.v20091127-r5931): org.eclipse.persistence.exceptions.ValidationException Exception Description: Cannot acquire data source [BookstoreJNDI]. Internal Exception: javax.naming.NamingException: Lookup failed for 'BookstoreJNDI' in SerialContext ,orb'sInitialHost=localhost,orb'sInitialPort=3700 [Root exception is javax.naming.NamingException: Failed to look up ConnectorDescriptor from JNDI [Root exception is com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR]] at org.eclipse.persistence.exceptions.ValidationException.cannotAcquireDataSource(ValidationException.java:451) at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:116) at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:94) at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162) at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:584) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:228) at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:368) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.getServerSession(EntityManagerFactoryImpl.java:151) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:207) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:195) at com.entity.BookTest.setUpClass(BookTest.java:31) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:44) at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:15) at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:41) at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:27) at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31) at org.junit.runners.ParentRunner.run(ParentRunner.java:220) at junit.framework.JUnit4TestAdapter.run(JUnit4TestAdapter.java:39) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.run(JUnitTestRunner.java:515) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.launch(JUnitTestRunner.java:1031) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.main(JUnitTestRunner.java:888) Caused by: javax.naming.NamingException: Lookup failed for 'BookstoreJNDI' in SerialContext ,orb'sInitialHost=localhost,orb'sInitialPort=3700 [Root exception is javax.naming.NamingException: Failed to look up ConnectorDescriptor from JNDI [Root exception is com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR]] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:442) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:569) at javax.naming.InitialContext.lookup(InitialContext.java:396) at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:110) ... 23 more Caused by: javax.naming.NamingException: Failed to look up ConnectorDescriptor from JNDI [Root exception is com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR] at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:109) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at com.sun.enterprise.naming.impl.SerialContext.getObjectInstance(SerialContext.java:472) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:437) ... 26 more Caused by: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:104) at com.sun.enterprise.connectors.service.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:216) at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:352) at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:106) ... 29 more Caused by: java.lang.ClassNotFoundException: com.sun.gjc.spi.ResourceAdapter at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:96) ... 32 more Exception Description: Cannot acquire data source [BookstoreJNDI]. Internal Exception: javax.naming.NamingException: Lookup failed for 'BookstoreJNDI' in SerialContext ,orb'sInitialHost=localhost,orb'sInitialPort=3700 [Root exception is javax.naming.NamingException: Failed to look up ConnectorDescriptor from JNDI [Root exception is com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR]])

    Read the article

  • Need a design pattern for representing multiple information sources

    - by hsmit
    I'm building a Java application that retrieves information from differing information sources. I'm using a sensor, a set of RecordStores and a few online web services. In the basic application all these resources are loaded by default. Some of these sources are directly read in a separate thread (load database, read sensor etc.). From this basic application some functions are started that use these sources. The classes that contain these functions (usually combining multiple sources information) are currently paramterized with a set of resources like this: AppPart a1 = new AppPart(source1, source2, source3); I could also do it like this AppPart a1 = new AppPart(this); ..where I need to make my sources public in order to read them. I'm also thinking about a kind of stage/collection to publish all sources on, e.g: public SourceCollectionStage sStage = new SourceCollectionStage(); and later: sStage.getSensor(); .. for example. What do you guys think is the best or most often used way to do this? Btw: the user interface is often implemented by the specific funtion classes, not by the main class. Should I do this in another way?

    Read the article

  • My service does not start on Windows 2008 (it works on Windows 2003)

    - by akirekadu
    When we install our product on Windows 2008 SP2, couple of services fail to start. After trying different things, we figured out that these service were able to start when "Log on as" is set to "Local system account". This service does need to run as a specific user because it requires access to secure resources. The service did run just fine under this special user account under Windows 2003. I am thinking the problem is related to UAC (user access control). Under interactive mode one can elevate permission by answering the security dialog box. How to do the same for a service? How to configure the service so it runs with necessary permissions? Thanks! Couple of notes I would like to add. One solution I tried is to execute the installer as administrator. The service does get installed. However, it creates another problem. An embedded 3rd party product and its files get installed with admin only rights. So we do need to run the installer as logged in user.

    Read the article

  • C# - parse content away from structure in a binary file

    - by Jeff Godfrey
    Using C#, I need to read a packed binary file created using FORTRAN. The file is stored in an "Unformatted Sequential" format as described here (about half-way down the page in the "Unformatted Sequential Files" section): http://www.tacc.utexas.edu/services/userguides/intel8/fc/f_ug1/pggfmsp.htm As you can see from the URL, the file is organized into "chunks" of 130 bytes or less and includes 2 length bytes (inserted by the FORTRAN compiler) surrounding each chunk. So, I need to find an efficient way to parse the actual file payload away from the compiler-inserted formatting. Once I've extracted the actual payload from the file, I'll then need to parse it up into its varying data types. That'll be the next exercise. My first thoughts are to slurp up the entire file into a byte array using File.ReadAllBytes. Then, just iterate through the bytes, skipping the formatting and transferring the actual data to a second byte array. In the end, that second byte array should contain the actual file contents minus all the formatting, which I'd then need to go back through to get what I need. As I'm fairly new to C#, I thought there might be a better, more accepted way of tackling this. Also, in case it's helpful, these files could be fairly large (say 30MB), though most will be much smaller...

    Read the article

  • yet another question about migrating to Java

    - by aloneguid
    Hi, There are plenty similar questions, but maybe responses to this one will save a developer's life :) I want to migrate to Java. The reasons are very clear: all the .NET vacancies are client and windows oriented (Silverlight developer, ASP.NET developer, WPF developer etc.) and none of them are any interest to me. I worked with .NET since it's beginning as our company decided to invest in .NET having C++ stack and all the natual problems, so I was just blindly following and actually enjoyed it as the products were mostly server oriented with mixed C++/C# code. Today I have beforementioned problem - can't find an inspiring job. I'd rather kill myself than start working on a Silverlight or WPF project. Searching Java vacancies shows promising results, however they all require a huge java-related technology stack and experience. The question is is there any chance to find a job quickly and without dramatic salary drop (I know that Java guys are usually better paid, so there must be a kind of a credit) and if not, how must time and effort does it take to migrate (my .NET knowledge mostly includes server-oriented technologies like NHibernate, WCF, threading, sockets, ASP.NET web services, Enterprise Library, NInject etc etc etc, and (still) some C++ leftovers). Thanks!

    Read the article

  • Kerberos and/or other authentication systems - One time logon for all PHP scripts

    - by devviedev
    I'm managing a set of web apps, almost exclusively written in PHP, and would like to find an authentication platform to build a role-based authorization system on top of. Also, I'd like the authentication system to be extensible to use for, for example, system services (SSH, etc.) Here are some of the main characteristics I'm looking for, in order of importance: Easy PHP implementation (storing/reading easily roles, etc.). Redundant, if possible. If an auth system goes down everyone is not locked out. Has clients for Windows and Mac. Easy web-based administration (adding/removing users/roles, changing passwords). If not, I can build an administration system without too much effort. One-time log on. I'd also like, when an auth token is issued, to store the user's IP address and use that to authorize the user for some non web-based applications. For that reason, I'd like a desktop client to issue the token and revoke tokens when, for example, the user becomes idle at their workstation. I'm thinking Kerberos might be a solution, but what are other options?

    Read the article

  • DNS-Based Environment Determination

    - by zvolkov
    Found the following here. The questions is: where can I find more details on how exactly implement this on Windows? Any guide or how-to anybody? Or maybe you can provide your invaluable suggestions? Specifically, how do I make so that "all QA servers would first resolve entries in qa.example.com first and then if that lookup failed they would try example.com" (I'm a dev, not a DNS specialist, but our IT Support has refused to help on this:() Use DNS Based Environment Determination for your servers. Do this by initially splitting your top level domain into a number of sub domains depending on their function, and then creating DNS Service Names in each of the sub domains pointing to the relevant server for that service. Based on the list above we would then have: * clientdb.prod.example.com for Production * clientdb.perf.example.com for Performance Testing * clientdb.qa.example.com for QA * clientdb.dev.example.com for Development Servers then resolve entries in their relevant sub domain by function. That is, all QA servers would first resolve entries in qa.example.com first and then if that lookup failed they would try example.com. This allows you to have a single configuration entry for your client database hostname (clientdb) that would resolve correctly in all environments. This technique has the added advantage of still having global services defined in a common top level domain. Here's one related (but not equivalent) SO question: http://stackoverflow.com/questions/774490/dns-resolving-based-on-client-ip This seems to be related to Providing "split horizon" DNS service. Reading that, I see that I will probably need separate DNS Server for each environment. Is this true or does Windows support some form of "tagging" the records to be visible depending on the requestor's IP? Also, cross-posted on ServerFault

    Read the article

  • Access Expression problem: it's too complex, so how do I turn it in to a function?

    - by Mike
    Access 2007 is telling me that my new expression is to complex. It used to work when we had 10 service levels, but now we have 19! Great! I've asked this question in SuperUser and someone suggested I try it over here. Suggestions are I turn it in to a function - but I'm not sure where to begin and what the function would look like. My expression is checking the COST of our services in the [PriceCharged] field and then assigning the appropriate HOURS [Servicelevel] when I perform a calculation to work out how much REVENUE each colleague has made when working for a client. The [EstimatedTime] field stores the actual hours each colleague has worked. [EstimatedTime]/[ServiceLevel]*[PriceCharged] Below is the breakdown of my COST to HOURS expression. I've put them on different lines to make it easier to read - please do not be put off by the length of this post, it's all the same info in the end. Many thanks,Mike ServiceLevel: IIf([pricecharged]=100(COST),6(HOURS), IIf([pricecharged]=200 Or [pricecharged]=210,12.5, IIf([pricecharged]=300,19, IIf([pricecharged]=400 Or [pricecharged]=410,25, IIf([pricecharged]=500,31, IIf([pricecharged]=600,37.5, IIf([pricecharged]=700,43, IIf([pricecharged]=800 Or [pricecharged]=810,50, IIf([pricecharged]=900,56, IIf([pricecharged]=1000,62.5, IIf([pricecharged]=1100,69, IIf([pricecharged]=1200 Or [pricecharged]=1210,75, IIf([pricecharged]=1300 Or [pricecharged]=1310,100, IIf([pricecharged]=1400,125, IIf([pricecharged]=1500,150, IIf([pricecharged]=1600,175, IIf([pricecharged]=1700,200, IIf([pricecharged]=1800,225, IIf([pricecharged]=1900,250,0)))))))))))))))))))

    Read the article

  • Jquery getJSON to external PHP page

    - by Pmarcoen
    I've been trying to make an ajax request to an external server. I've learned so far that I need to use getJSON to do this because of security reasons ? Now, I can't seem to make a simple call to an external page. I've tried to simplify it down as much as I can but it's still not working. I have 2 files, test.html & test.php my test.html makes a call like this, to localhost for testing : $.getJSON("http://localhost/OutVoice/services/test.php", function(json){ alert("JSON Data: " + json); }); and I want my test.php to return a simple 'test' : $results = "test"; echo json_encode($results); I'm probably making some incredible rookie mistake but I can't seem to figure it out. Also, if this works, how can I send data to my test.php page, like you would do like test.php?id=15 ? The test.html page is calling the test.php page on localhost, same directory I don't get any errors, just no alert ..

    Read the article

  • How to protect copyright on large web applications?

    - by Saif Bechan
    Recently I have read about Myows, described as "the universal copyright management and protection app for smart creatives". It is used to protect copyright and more. Currently I am working on a large web application which is in late testing phase. Because of the complexity of the app there are not many versions of it online so copyright will be a huge issue for me as much of the code is in JavaScript and is easy copyable. I was glad to see that there is some company out there that provide such services, and naturally I wanted to know if there were people using it. I did not know that this type of concept was so new. Is protecting copyright a good idea for a large web application? If so, do you think Myows will be worth using, or are there better ways to achieve that? Update: Wow, there is no better person to have answered this question like the creator himself. There were some nice points made in the answer, and I think it will be a good service for people like me. In the next couple of weeks I will be looking further into the subject and start uploading my code and see how it works out. I will leave this question up because I do want some more suggestions on this topic.

    Read the article

  • 3 Servers, is this is a cluster?

    - by Andy Barlow
    Hello, At the moment I have one Ubuntu server, 9.10, running with a simple Samba share, a mail server, DNS server and DHCP server. Mostly its just there for file sharing and email server. I also have 2 other servers that are exactly the same hardware and spec as the first, which have an rsync set up to retrieve the shared folders and backs them up. However, if the first server goes down, all of our shares disappear along with our mail and the system must be rebuilt. Also I tend to find if people are downloading a large amount from the file server, no-one can access there emails - especially in the morning when everyone is signing in at once. Would it be more beneficial for me to have all 3 servers, all running the same services, doing the same thing with some sort of cluster with load balancing? I'm not really sure where to begin looking, or how to go about such a setup where 3 servers are all identical, but perhaps one acts as the main load balancer?? If someone can point me in the right direction, or if this simply sounds like one of those Enterprise Cloud's that is now a default setup in Ubuntu Server 9.10+, then I'll go down that route. Cheers in advance. Andy

    Read the article

  • Online voice chat: Why client-server model vs. peer-to-peer model?

    - by sstallings
    I am adding online voice chat to a Silverlight app. I've been reviewing current apps, services and SDKs found thru online searches and forums. I'm finding that the majority of these implement a client-server (C/S) model and I'm trying to understand why that model versus a peer-to-peer (PTP) model. To me PTP would be preferable because going direct between peers would be more efficient (fewer IP hops and no processing along the way by a server computer) and no need for a server and its costs and dependencies. I found some products offer the ability to switch from PTP to C/S if the PTP proves insufficient. As I thought more about it, I could see that C/S could be better if there are more than two peers involved in a conversation, then the server (supposedly with more bandwidth) could do a better job of relaying each peers outgoing traffic to the multiple other peers. In C/S many-to-many voice chatting, each peer's upstream broadband (which is where the bottleneck inherently is) would only have to carry each item of voice traffic once, then the server would use its superior bandwidth to relay the message to the multiple other peers. But, in a situation with one-on-one voice chatting it seems that PTP would be best. A server would not reduce each of the two peer's bandwidth requirements and would only add unnecessary overhead, dependency and cost. In one-on-one voice chatting: Am I mistaken on anything above? Would peer-to-peer be best? Would a server provide anything of value that could not be provided by a client-only program? Is there anything else that I should be taking into consideration? And lastly, can you recommend any Silverlight PTP or C/S voice chat products? Thanks in advance for any info.

    Read the article

  • C# Inheritence: Choosing what repository based on type of inherited class

    - by Oskar Kjellin
    I have been making a program that downloads information about movies from the internet. I have a base class Title, which represents all titles. Movie, Serie and Episode are inherited from that class. To save them to the database I have 2 services, MovieService and SerieService. They in turn call repositories, but that is not important here. I have a method Save(Title title) which I am not very happy with. I check for what type the title is and then call the correct service. I would like to perhaps write like this: ITitleService service = title.GetService(); title.GetSavedBy(service); So I have an abstract method on Title that returns an ITitleSaver, which will return the correct service for the instance. My question is how should I implement ITitleSaver? If I make it accept Title I will have to cast it to the correct type before calling the correct overload. Which will lead to having to deal with casting once again. What is the best approach to dealing with this? I would like to have the saving logic in the corresponding class.

    Read the article

  • Database not updating after UPDATE SQL statement in ASP.net

    - by Ronnie
    I currently have a problem attepting to update a record within my database. I have a webpage that displays in text boxes a users details, these details are taken from the session upon login. The aim is to update the details when the user overwrites the current text in the text boxes. I have a function that runs when the user clicks the 'Save Details' button and it appears to work, as i have tested for number of rows affected and it outputs 1. However, when checking the database, the record has not been updated and I am unsure as to why. I've have checked the SQL statement that is being processed by displaying it as a label and it looks as so: UPDATE [users] SET [email]=@email, [firstname]=@firstname, [lastname]=@lastname, [promo]=@promo WHERE ([users].[user_id] = 16) The function and other relevant code is: Sub Button1_Click(sender As Object, e As EventArgs) changeDetails(emailBox.text, firstBox.text, lastBox.text, promoBox.text) End Sub Function changeDetails(ByVal email As String, ByVal firstname As String, ByVal lastname As String, ByVal promo As String) As Integer Dim connectionString As String = "Provider=Microsoft.Jet.OLEDB.4.0; Ole DB Services=-4; Data Source=C:\Documents an"& _ "d Settings\Paul Jarratt\My Documents\ticketoffice\datab\ticketoffice.mdb" Dim dbConnection As System.Data.IDbConnection = New System.Data.OleDb.OleDbConnection(connectionString) Dim queryString As String = "UPDATE [users] SET [email]=@email, [firstname]=@firstname, [lastname]=@lastname, "& _ "[promo]=@promo WHERE ([users].[user_id] = " + session.contents.item("ID") + ")" Dim dbCommand As System.Data.IDbCommand = New System.Data.OleDb.OleDbCommand dbCommand.CommandText = queryString dbCommand.Connection = dbConnection Dim dbParam_email As System.Data.IDataParameter = New System.Data.OleDb.OleDbParameter dbParam_email.ParameterName = "@email" dbParam_email.Value = email dbParam_email.DbType = System.Data.DbType.[String] dbCommand.Parameters.Add(dbParam_email) Dim dbParam_firstname As System.Data.IDataParameter = New System.Data.OleDb.OleDbParameter dbParam_firstname.ParameterName = "@firstname" dbParam_firstname.Value = firstname dbParam_firstname.DbType = System.Data.DbType.[String] dbCommand.Parameters.Add(dbParam_firstname) Dim dbParam_lastname As System.Data.IDataParameter = New System.Data.OleDb.OleDbParameter dbParam_lastname.ParameterName = "@lastname" dbParam_lastname.Value = lastname dbParam_lastname.DbType = System.Data.DbType.[String] dbCommand.Parameters.Add(dbParam_lastname) Dim dbParam_promo As System.Data.IDataParameter = New System.Data.OleDb.OleDbParameter dbParam_promo.ParameterName = "@promo" dbParam_promo.Value = promo dbParam_promo.DbType = System.Data.DbType.[String] dbCommand.Parameters.Add(dbParam_promo) Dim rowsAffected As Integer = 0 dbConnection.Open Try rowsAffected = dbCommand.ExecuteNonQuery Finally dbConnection.Close End Try labelTest.text = rowsAffected.ToString() if rowsAffected = 1 then labelSuccess.text = "* Your details have been updated and saved" else labelError.text = "* Your details could not be updated" end if End Function Any help would be greatly appreciated.

    Read the article

  • A few questions about a Rails model for a simple addressbook app

    - by user284194
    I have a Rails application that lists information about local services. My objectives for this model are as follows: 1. Require the name and tag_list fields. 2. Require one or more of the tollfreephone, phone, phone2, mobile, fax, email or website fields. 3. If the paddress field has a value, then encode it with the Geokit plugin. Here is my entry.rb model: class Entry < ActiveRecord::Base validates_presence_of :name, :tag_list validates_presence_of :tollfreephone or :phone or :phone2 or :mobile or :fax or :email or :website acts_as_taggable_on :tags acts_as_mappable :auto_geocode=>{:field=>:paddress, :error_message=>'Could not geocode physical address'} before_save :geocode_paddress validate :required_info def required_info unless phone or phone2 or tollfreephone or mobile or fax or email or website errors.add_to_base "Please have at least one form of contact information." end end private def geocode_paddress #if paddress_changed? geo=Geokit::Geocoders::MultiGeocoder.geocode (paddress) errors.add(:paddress, "Could not Geocode address") if ! geo.success self.lat, self.lng = geo.lat,geo.lng if geo.success #end end end Requiring name and tag_list work, but requiring one (or more) of the tollfreephone, phone, phone2, mobile, fax, email or website fields does not. As for encoding with Geokit, in order to save a record with the model I have to enter an address. Which is not the behavior I want. I would like it to not require the paddress field, but if the paddress field does have a value, it should encode the geocode. As it stands, it always tries to geocode the incoming entry. The commented out "if paddress_changed?" was not working and I could not find something like "if paddress_exists?" that would work. Help with any of these issues would be greatly appreciated. I posted three questions pertaining to my model because I'm not sure if they are preventing each other from working. Thank you for reading my questions.

    Read the article

  • ViewModel updates after Model server roundtrip

    - by Pavel Savara
    I have stateless services and anemic domain objects on server side. Model between server and client is POCO DTO. The client should become MVVM. The model could be graph of about 100 instances of 20 different classes. The client editor contains diverse tab-pages all of them live-connected to model/viewmodel. My problem is how to propagate changes after server round-trip nice way. It's quite easy to propagate changes from ViewModel to DTO. For way back it would be possible to throw away old DTO and replace it whole with new one, but it will cause lot of redrawing for lists/DataTemplates. I could gather the server side changes and transmit them to client side. But the names of fields changed would be domain/DTO specific, not ViewModel specific. And the mapping seems nontrivial to me. If I should do it imperative way after round-trip, it would break SOC/modularity of viewModels. I'm thinking about some kind of mapping rule engine, something like automappper or emit mapper. But it solves just very plain use-cases. I don't see how it would map/propagate/convert adding items to list or removal. How to identify instances in collections so it could merge values to existing instances. As well it should propagate validation/error info. Maybe I should implement INotifyPropertyChanged on DTO and try to replay server side events on it ? And then bind ViewModel to it ? Would binding solve the problems with collection merges nice way ? Is EventAgregator from PRISM useful for that ? Is there any event record-replay component ? Is there better client side pattern for architecture with server side logic ?

    Read the article

  • Query for rows including child rows

    - by MAD9
    A few weeks ago, I asked a question about how to generate hierarchical XML from a table, that has a parentID column. It all works fine. The point is, according to the hierarchy, I also want to query a table. I'll give you an example: Thats the table with the codes: ID CODE NAME PARENTID 1 ROOT IndustryCode NULL 2 IND Industry 1 3 CON Consulting 1 4 FIN Finance 1 5 PHARM Pharmaceuticals 2 6 AUTO Automotive 2 7 STRAT Strategy 3 8 IMPL Implementation 3 9 CFIN Corporate Finance 4 10 CMRKT Capital Markets 9 From which I generate (for displaying in a TreeViewControl) this XML: <record key="1" parentkey="" Code="ROOT" Name="IndustryCode"> <record key="2" parentkey="1" Code="IND" Name="Industry"> <record key="5" parentkey="2" Code="PHARM" Name="Pharmaceuticals" /> <record key="6" parentkey="2" Code="AUTO" Name="Automotive" /> </record> <record key="3" parentkey="1" Code="CON" Name="Consulting"> <record key="7" parentkey="3" Code="STRAT" Name="Strategy" /> <record key="8" parentkey="3" Code="IMPL" Name="Implementation" /> </record> <record key="4" parentkey="1" Code="FIN" Name="Finance"> <record key="9" parentkey="4" Code="CFIN" Name="Corporate Finance"> <record key="10" parentkey="9" Code="CMRKT" Name="Capital Markets" /> </record> </record> </record> As you can see, some codes are subordinate to others, for example AUTO << IND << ROOT What I want (and have absolutely no idea how to realise or even, where to start) is to be able to query another table (where one column is this certain code of course) for a code and get all records with the specific code and all subordinate codes For example: I query the other table for "IndustryCode = IND[ustry]" and get (of course) the records containing "IND", but also AUTO[motive] and PHARM[aceutical] (= all subordinates) Its an SQL Express Server 2008 with Advanced Services.

    Read the article

  • Apache mod_deflate not compressing responses from Adobe BlazeDS

    - by DumCoder
    Hello, I have following setup Apache Box <=> Weblogic Box1 <=> Weblogic Box2 Apache Box : mod_weblogic(weblogic apache plugin), mod_deflate Weblogic Box1 : Weblogic 10.3 Weblogic Portal, Adobe BlazeDS Weblogic Box2 : Weblogic 10.3 SUN Jersey for REST API Apache forwards the request to Box1, where some of the REST requests get forwarded to Box 2 by Adobe BlazeDS. On Apache i have setup mod_deflate and mod_weblogic as follows: <IfModule mod_weblogic.c> WebLogicHost portalappeng.xxx.com WebLogicPort 7001 </IfModule> <Location /Portal> SetHandler weblogic-handler SetOutputFilter DEFLATE </Location> but when i look at the Apache deflate log i only see the jsp responses from Box1 being compressed, but the responses which BlazeDS forwarded to Box 2 are not compressed. Also the .js and .css files which are served from Box1 are not compressed Here are sample from log file, first response came directly from Box1 and got compressed, second and third also from Box1 but not compressed. Fourth one came from Box 2 to Box 1(BlazeDS) and then to Apache, not compressed. What am i missing? "GET /Portal/resources/services/userService/users?AppId=CM&CMUserType=ContentProducer&token=PSWNV8kb8db4WMBgWUjAbw%3D%3D&UserId=user123 HTTP/1.1" 711/7307 (9%) "GET /Portal/css/jquery-ui-1.7.2.custom.css HTTP/1.1" -/- (-%) "GET /Portal/framework/skins/shared/js/console.js HTTP/1.1" -/- (-%) "POST /Portal/messagebroker/http HTTP/1.1" -/- (-%)

    Read the article

  • Data Access Layer, Best Practices

    - by labratmatt
    I'm looking for input on the best way to refactor the data access layer (DAL) in my PHP based web app. I follow an MVC pattern: PHP/HTML/CSS/etc. views on the front end, PHP controllers/services in the middle, and a PHP DAL sitting on top of a relational database in the model. Pretty standard stuff. Things are working fine, but my DAL is getting large (codesmell?) and becoming a bit unwieldy. My DAL contains almost all of the logic to interface with my database and is full of functions that look like this: function getUser($user_id) { $statement = "select id, name from users where user_id=:user_id"; PDO builds statement and fetchs results as an array return $array_of_results_generated_by_PDO_fetch_method; } Notes: The logic in my controller only interacts with the model using functions like the above in the DAL I am not using a framework (I'm of the opinion that PHP is a templating language and there's no need to inject complexity via a framework) I generally use PHP as a procedural language and tend to shy away from its OOP approach (I enjoy OOP development but prefer to keep that complexity out of PHP) What approaches have you taken when your DAL has reached this point? Do I have a fundamental design problem? Do I simply need to chop my DAL into a number of smaller files (logically divide it)? Thanks.

    Read the article

  • Json HTTP Module stream issue

    - by Justin
    Hey, I have an HTTP Module that I use to clean up the JSON returned by my web service (see http://www.codeproject.com/KB/webservices/ASPNET_JSONP.aspx?msg=3400287#xx3400287xx for an example of this.) Basically it relates to calling cross-domain JSON web services from javascript. There is this JsonHttpModule which uses a JsonResponseFilter Stream class to write out the JSON and the overloaded Write method is supposed to wrap the name of the callback function around the JSON, otherwise the JSON errors out as needing a label. However, if the JSON is really long, the Write method in the Stream class is called multiple times, causing the callback function to incorrectly get inserted midway through the JSON. Is there a way in the Stream class to wrap the callback function around the stream at the end or to specify that it write all of the JSON in 1 Write method instead of in chunks?? Here's where it calls the JsonResponseFilter in the JsonHttpModule: public void OnReleaseRequestState(object sender, EventArgs e) { HttpApplication app = (HttpApplication)sender; if (!_Apply(app.Context.Request)) return; // apply response filter to conform to JSONP app.Context.Response.Filter = new JsonResponseFilter(app.Context.Response.Filter, app.Context); } Here's the Write method in the JsonResponseFilter Stream class that gets called multiple times: public override void Write(byte[] buffer, int offset, int count) { var b1 = Encoding.UTF8.GetBytes(_context.Request.Params["callback"] + "("); _responseStream.Write(b1, 0, b1.Length); _responseStream.Write(buffer, offset, count); var b2 = Encoding.UTF8.GetBytes(");"); _responseStream.Write(b2, 0, b2.Length); } Thanks for any help! Justin

    Read the article

  • Php sting handling triks

    - by Dam
    Hi my question Need to get the 10 word before and 10 words after for the given text . i mean need to start the 10 words before the keyword and end with 10 word after the key word. Given text : "Twenty-three" The main trick the having some html tags tags need to keep that tag with this content only the words from 10before - 10after content is bellow : <div id="hpFeatureBoxInt"><h2><span class="dy">Top News Story</span></h2><h3><a href="/go/homepage/i/int/news/world/1/-/news/1/hi/world/europe/8592190.stm">Suicide bombings hit Moscow Metro</a></h3><p>Past suicide bombings in Moscow have been blamed on Islamist rebels At least 35 people have been killed after two female suicide bombers blew themselves up on Moscow Metro trains in the morning rush hour, officials say.<img height="150" width="201" alt="Emergency services carry a body from a Metro station in Moscow (29 March 2010)" src="http://wwwimg.bbc.co.uk/feedengine/homepage/images/_47550689_moscowap203_201x150.jpg">Twenty-three died in the first blast at 0756 (0356 GMT) as a<a href="#"> train stood </a>at the central Lubyanka station, beneath the offices of the FSB intelligence agency.About 40 minutes later, a second explosion ripped through a train at Park Kultury, leaving another 12 dead.No-one has said they carried out the worst attack in the capital since 2004. </p><p id="fbilisten"><a href="/go/homepage/i/int/news/heading/-/news/">More from BBC News</a></p></div> Thank you

    Read the article

  • NTLM Authentication fails when behind Proxy server

    - by Jan Petersen
    Hi All, I've seen a number of post about consuming Web Services from behind a proxy server, but none that seams to address this problem. I'm building a desktop application, using Java, JAX-WS in NetBeans. I have a working prototype, that can query the server for authentication mode, successfully authenticate and retrieve a list of web site. However, if I run the same app from a network that is behind a proxy server (the proxy does not require authentication), then I'm running into trouble. I have sniffed the traffic, and noticed the following: Behind Proxy # Result Protocol Host URL 1 200 HTTP host.domain.com /_vti_bin/Authentication.asmx 2 401 HTTP host.domain.com /_vti_bin/Webs.asmx 3 401 HTTP host.domain.com /_vti_bin/Webs.asmx 4 401 HTTP host.domain.com /_vti_bin/Webs.asmx 5 401 HTTP host.domain.com /_vti_bin/Webs.asmx Without Proxy # Result Protocol Host URL 1 200 HTTP host.domain.com /_vti_bin/Authentication.asmx 2 401 HTTP host.domain.com /_vti_bin/Webs.asmx 3 401 HTTP host.domain.com /_vti_bin/Webs.asmx 4 401 HTTP host.domain.com /_vti_bin/Webs.asmx 5 401 HTTP host.domain.com /_vti_bin/Webs.asmx 6 200 HTTP host.domain.com /_vti_bin/Webs.asmx When running the code from a network without a proxy server, I successfully Authentication with the server, but when I'm behind the proxy server, the traffic is cut-off at the 5th message, and thus don't succeed. I know from the Java docs that On Microsoft Windows platforms, NTLM authentication attempts to acquire the user credentials from the system without prompting the user's authenticator object. If these credentials are not accepted by the server then the user's authenticator will be called. Given that my Authentication code is called only ones, and only as the 5th attempt, it appears as if the connection is dropped when behind the proxy server before my Authentication object is used. Is there any way I can control the behavior of Authentication module, to not have it use the system credentials? I have put the source text java class files of a demo app up, showing the issue at the following urls (it's a bit to long even in the short demo form to post here). link text Br Jan

    Read the article

< Previous Page | 735 736 737 738 739 740 741 742 743 744 745 746  | Next Page >