Search Results

Search found 24646 results on 986 pages for 'turnkey linux'.

Page 74/986 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

  • linux grep question

    - by lepricon123
    how do i find a string in files in a directory. And these file names begin with letter a. I also want to get the number of occurrences of this string fromt he grep I run. I tried this cat * | grep -c string but it searches all files. I just want to search files that begin with letter a Thanks

    Read the article

  • Linux: Dropbox alternative with sftp/rsync/... access

    - by Daniel
    Currently on my VPS I'm running couple of sites and Dropbox daemon to store backups. Problem is that VPS has 512M RAM and it was enough until new version of Wordpress (I don't know why, but now it consumes more memory) so I have a really bad choice: either stop Dropbox daemon and backups or to buy more memory (not that expensive but still). So I'm looking for some way to rsync data into Dropbox or similar service or figure out how to make Dropbox consume less memory. Any ideas?

    Read the article

  • How to record screencast on Linux with mouse clicks and key hits shown

    - by zalun
    Basically I'm looking for an application. I know it's slightly off topic, but I'm looking for it to record a series of tutorials for a program I wrote. It's important to show the actions like mouse click, mouse right click, and all what's coming out from the keyboard. In the similar way to this video http://www.flickr.com/photos/jannis/3246408003/ which is made using OSX and ScreenFlick http://www.araelium.com/screenflick/ Is there such an option? Thanks

    Read the article

  • Buildcraft Minecraft mod causing crashes, NVIDIA-304xx Linux Drivers, KDE

    - by wolfo9999
    All is perfect, 96 fps average. Until an item tries to enter a buildcraft pipe. Tekkit instantly crashes, no error dialog. I have no idea what logs to look at for information on the crash, or how to fix it. OpenGL is enabled in KDE, Driver package is nvidia-304xx lspci output: VGA compatible controller: NVIDIA Corporation GT218 [Quadro FX 380M] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 172b Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d2000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d0000000 (64-bit, prefetchable) [size=32M] I/O ports at 5000 [size=128] [virtual] Expansion ROM at d3080000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia

    Read the article

  • Linux flash player settings dialog unclickable

    - by bullettime
    I'm using Slackware 13. When a flash app pops up the allow/deny dialog, I'm stuck because the buttons are unclickable. My adobe flash player version is 10,0,42,34. How can I fix this problem? Edit: I'm using fluxbox. I'm using an acer notebook with a synaptics touchpad... both the touchpad and the mouse can't interact with the dialog.

    Read the article

  • Fetch videos from sony handycam to linux

    - by bstpierre
    I've got a Sony Handycam DCR-DVD101. When I plug connect the USB cable to my laptop (Ubuntu 10) it doesn't mount any storage device. If I run usb-devices, I see: T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=054c ProdID=00c1 Rev=01.00 S: Manufacturer=SONY S: Product=Storage Device C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 Driver=usb-storage The driver says usb-storage, but I'm not sure how to get the device mounted. Is there a way to make this work? Update: checking dmesg, I see: [259072.576559] usb 2-1.1: new high speed USB device using ehci_hcd and address 6 [259072.687200] usb 2-1.1: configuration #1 chosen from 1 choice [259072.836188] Initializing USB Mass Storage driver... [259072.836476] scsi5 : SCSI emulation for USB Mass Storage devices [259072.836632] usb-storage: device found at 6 [259072.836636] usb-storage: waiting for device to settle before scanning [259072.836660] usbcore: registered new interface driver usb-storage [259072.836666] USB Mass Storage support registered. [259077.830410] usb-storage: device scan complete [259077.832343] scsi 5:0:0:0: CD-ROM SONY DDX-A1010 R1.0 PQ: 0 ANSI: 0 [259077.888167] sr1: scsi3-mmc drive: 0x/0x pop-up [259077.888446] sr 5:0:0:0: Attached scsi CD-ROM sr1 [259077.888593] sr 5:0:0:0: Attached scsi generic sg2 type 5 [259080.002079] sr 5:0:0:0: [sr1] Unhandled sense code [259080.002085] sr 5:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [259080.002091] sr 5:0:0:0: [sr1] Sense Key : Blank Check [current] [259080.002097] sr 5:0:0:0: [sr1] Add. Sense: No additional sense information [259080.002104] sr 5:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 00 00 [259080.002117] end_request: I/O error, dev sr1, sector 0 [259080.002123] Buffer I/O error on device sr1, logical block 0 [259080.002128] Buffer I/O error on device sr1, logical block 1 Those I/O errors don't look good, is there any hope?

    Read the article

  • What does S in linux file properties mean?

    - by penguin
    I'm creating directories and changing the permissions of them in perl with the following code: umask 0000; mkdir $path, 0770; chown $userid, $groupid, $path; Now when I do ls -l on a directory I've just created, they are as follows: drwxrws--- 2 user group 4096 Nov 3 15:34 test1 I notice for the group permissions, there's an s instead of x. Even if I chmod manually to remove all permissions for the user and group ("chmod g=" and "chmod u=", it's still there: d-----S--- 2 user group 4096 Nov 3 15:36 test2 The internet suggests S means everything in the folder is run as su or something? I don't quite understand what it means but I figure I should understand seeing as these are webroots so if there's a security implication, I ought to be aware of it. Many thanks for your help!

    Read the article

  • Hardening non-root standalone Linux Tomcat install

    - by NoozNooz42
    I want to know if you have any tips as to how to strengthen the security of a non-root install of Tomcat in standalone mode once Tomcat is already installed in a non-root account, in standalone mode. I precise this because, for example, I'm not at all interested by the answers given here (because both Java and Tomcat requires root priviledges there to be installed and I've got zero interest in running jsvc): http://serverfault.com/questions/43765 So far, here's what I've done for my non-root standalone Tomcat 6 install: download and install the JRE .bin provided by Oracle/Sun (no need to be root here) (no need for a full JDK anymore right seen that Jasper [Tomcat's JSP engine] has its own compiler now right?) download and tar -xzf tomcat 6 (no need to be root here) set up transparent port-forwarding (must be root here) Note that my distribution is a Debian one and I have exactly zero interest in downloading Debian package / backports / whatever... Because, once again, I DO NOT want to need to be root to install Java & Tomcat. The only moment I needed to be root was to configure the firewall to transparently do the port forwarding 80 <-- 8080 and 443 <-- 8443. I then deleted all the default webapps but one: cd ~/apache-tomcat-6.0.26/webapps rm -rf docs rm -rf examples/ rm -rf manager/ rm -rf ROOT/ What about the directory ~/apache-tomcat-6.0.26/webapps/host-manager, do I need it or can I delete it? So, once I've installed Tomcat standalone in a non-root account (and taken into account that I don't want to enter the root password anymore and that I don't plan to install the whole Apache shebang), what more can I do? Are there connectors I can disable? (how?)

    Read the article

  • Linux Experts Riddle: Network output of 10MB/s on 10GB/s NIC

    - by user150324
    I have two CentOS 6 servers. I am trying to transfer files between them. Source server has 10GB/s NIC nd destination server has 1GB/s NIC. Regardless to the command used nor the protocol, the transfer speed is ~1 Mega byte per second. The goal is at least couple dozens MB per second. I have tried: rsync (also with various encryptions), scp, wget, aftp, nc. Here's some testing results with iperf: [root@serv ~]# iperf -c XXX.XXX.XXX.XXX -i 1 ------------------------------------------------------------ Client connecting to XXX.XXX.XXX.XXX, TCP port 5001 TCP window size: 64.0 KByte (default) ------------------------------------------------------------ [ 3] local XXX.XXX.XXX.XXX port 33180 connected with XXX.XXX.XXX.XXX port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 1.0 sec 1.30 MBytes 10.9 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 1.0- 2.0 sec 1.28 MBytes 10.7 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 2.0- 3.0 sec 1.34 MBytes 11.3 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 3.0- 4.0 sec 1.53 MBytes 12.8 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 4.0- 5.0 sec 1.65 MBytes 13.8 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 5.0- 6.0 sec 1.79 MBytes 15.0 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 6.0- 7.0 sec 1.95 MBytes 16.3 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 7.0- 8.0 sec 1.98 MBytes 16.6 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 8.0- 9.0 sec 1.91 MBytes 16.0 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 9.0-10.0 sec 2.05 MBytes 17.2 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.68 MBytes 14.0 Mbits/sec I guess HD is not the bottleneck here.

    Read the article

  • Linux script to kill process listening on a particular port

    - by Evgeny
    I have a process that listens on a TCP port (?0003). From time to time it crashes - badly. It stops working, but continues hogging the port for some time, so I can't even restart it. I'm looking to automate this. What I do right now is: netstat -ntlp |grep -P "\*\:\d0003" To see what the PID is and then: kill -9 <pid> Does anyone have a script (or EXE for that matter) that would link the two steps together, ie. parse the PID from the first command and pass it to the second?

    Read the article

  • Installing and using 32-bit software in 64-bit Linux

    - by Isxek
    Is there a way to install and run i386 software packages inside an AMD64 version of Xubuntu (v9.10)? Just to get an idea, how much effort would it require to port it to something usable within the said OS. I imagine it would be a lot. Thanks! If you need more info (specs, etc.) let me know.

    Read the article

  • Where is autorun in Linux(Ubuntu)?

    - by pukipuki
    I have the machine with Ubuntu desktop 7.something ... I want some server-like behavior without my participation. For example I have Azureus torrent-client there and I want it to start with the system like a service. Is it possible or I need another torrent-client?

    Read the article

  • Linux: Combine two partitions?

    - by Jakobud
    This workstation is running Fedora 11. It has 4 HDDs raided into 4 partitions: / (31 gig) /boot (134 meg) /data (140 gig) /FC12 (31 gig) The previous employee that used my current workstation set it up this way. He apparently created the FC12 partition to test a Fedora 12 installation. I don't need Fedora 12 so I wiped that partition and now I'm wondering if its possible for me to combine the /FC12 partition into the / partition, so that the / partition will now be 62 gigs. Is this possible? If so, how? Can it be done w/o reinstalling the OS? I've toyed with Fedora's LVM admin interface but it seems very basic and there doesn't seem to be anything about combining partitions. I've also messed with other HDD utilities that are in Fedora (Palimpsest Disk Utlity) but all it seems to be able to do is mount and umount partitions.

    Read the article

  • fdisk (linux) partitioning raid0

    - by Silverrocker
    I'm trying to create partitions for a slackware instalation on my computer (beside Windows 7) just to have a nice distro running mostly for school but when I run fdisk and print the partitiontable I get the following message: Partition x does not end on cylinder boundary. (in my case x = 1, just using x to help googlers). I must say I'm using a raid card (AMCC 3ware 9500S SATA RAID Controller). Maybe this is the problem. How can I fix this without loosing any data?

    Read the article

  • Linux file structure

    - by morpheous
    ok. I asked this question earlier(as part of another question) and got no response - so here it is again: what i the recommened directory for me to store the following: 1). my apps 2). development tools (C++ tools) 3). AMP applications for LAMP stack (Apache, MySQL, PHP) 4). files for websites that I develop on my machine - e.g. website1, website2 etc ...

    Read the article

  • Installing MySQL-Ruby on Linux and Ruby 1.9.2

    - by Klam
    I am having an absurdly difficult time getting MySQL-Ruby to install on RedHat 4 using Ruby 1.9.2. I am behind a company proxy that prevents pretty much any package tool from connecting to external repositories so "gem install mysql" isn't going to cut it. I have tried installing the mysql-ruby gem locally but it fails with a mysterious: $gem install mysql-2.8.1.gem Building native extensions. This could take a while... ERROR: Error installing mysql-2.8.1.gem: ERROR: Failed to build gem native extension. /ns/local/apps/internal/SWS/MetricsPublisher/ruby/bin/ruby extconf.rb checking for mysql_query() in -lmysqlclient... no checking for main() in -lm... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lz... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lsocket... no checking for mysql_query() in -lmysqlclient... no checking for main() in -lnsl... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lmygcc... no checking for mysql_query() in -lmysqlclient... no *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. I have also tried building the module myself by following the included readme. The results: $ruby extconf.rb --with-mysql-include=/path_to_my_sql_headers/mysql/include/ --with-mysql-lib=/path_to_my_sql_lib/mysql/lib/ checking for mysql_query() in -lmysqlclient... no checking for main() in -lm... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lz... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lsocket... no checking for mysql_query() in -lmysqlclient... no checking for main() in -lnsl... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lmygcc... no checking for mysql_query() in -lmysqlclient... no *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Does anybody have any ideas? Quite frankly, I don't even care if MySQL-Ruby specifically works, I just want ANY means of connecting to a MySQL DB through a ruby call in ruby 1.9. Thanks.

    Read the article

  • Linux Kernel IRQ Routing with irqbalance / kernel options

    - by tim
    I'm trying to get my Xen Dom0 distributing the irqs in an smp enviroment. As far as I know there are 2 Options: Use irqbalance Configure the kernel without cpu hotplug support My System is Debian Squeeze, Xen 4.0.4, Kernel 3.2.31. My Problem is: irqbalance segfaults due to a changed /proc/irq* layout or irq0 missing (this seems to be a very old bug existing since Lenny) To configure a kernel without cpu hotplug support you must disable cpu powermanagement which seems to be impossible through the standard wys (make config / make menuconfig) - the option CONFIG_PM simply defaults to "Y". Any idea anyone on how to get a debian dom0 kernel with a proper irq distribution?

    Read the article

  • How to block access to websites on a linux box [closed]

    - by user364952
    I'm just curious how many ways people can come up with to block access to a website. I simply intended to block (my own) access to news.ycombinator.com to stop my productivity drain. The first two methods I thought of were editing the hosts file to resolve news.ycombinator.com to 0.0.0.0 or adding a rule to iptables. iptables -A OUTPUT -d news.ycombinator.com -j REJECT Disclaimer: I do realise that the above two methods are easily by-passable. Doesn't help this is my own machine. What other ways does the internet know?

    Read the article

  • Map /dev/bus/usb node to /sys node on Linux

    - by Cody Brocious
    I'm using libusb to find and access a USB device, but once I get the information I need from there, I need to map it to a /sys node. This could be to the actual USB bus it's on, the /sys/bus/usb-serial node (which is where I'm going to get eventually), or effectively anywhere else since I can walk the tree from there. I can get to a /dev/bus/usb node easily enough, but I'm a bit lost from there. What would be the best route to perform this mapping? Alternatively, a way to get the /dev/ttyUSB device node for a /dev/bus/usb node would work as well, since it gets me the same result.

    Read the article

  • Dealing with different usernames when mounting removable media in Linux

    - by dimatura
    I have a laptop in which my username is, say, "foo". I have an external drive, formatted with Ext4, for which all files are owned by "foo" (at a filesystem level). Now, I have a desktop in which my username is, say, "bar". If I mount this external drive in this computer the files are considered to not be owned by "bar". This makes sense, but it is annoying because their bits mode are set so that only the owner can modify/delete them. What's the cleanest way to deal with this? Create a group with "foo" and "bar" and add group modification permissions?

    Read the article

  • Software RAID 10 on Linux

    - by vpetersson
    For a long time, I've been thinking about switching to RAID 10 on a few servers. Now that Ubuntu 10.04 LTS is live, it's time for an upgrade. The servers I'm using are HP Proliant ML115 (very good value). It has four internal 3.5" slots. I'm currently using one drive for the system and a RAID5 array (software) for the remaining three disks. The problem is that this creates a single-point-of-failure on the boot drive. Hence I'd like to switch to a RAID10 array, as it would give me both better I/O performance and more reliability. The problem is only that good controller cards that supports RAID10 (such as 3Ware) cost almost as much as the server itself. Moreover software-RAID10 does not seem to work very well with Grub. What is your advice? Should I just keep running RAID5? Have anyone been able to successfully install a software RAID10 without boot issues?

    Read the article

  • delete key on linux does not work

    - by Gauthier Fleutot
    Hi! My delete key does not work in ubuntu, it does nothing. I understand that this is a common problem, but I could solve it with the information I found elsewhere. I ran xev. Pressing the 'a' key gives: KeyRelease event, serial 30, synthetic NO, window 0x2c00001, root 0x1a6, subw 0x0, time 7255643, (-113,-107), root:(425,300), state 0x2010, keycode 38 (keysym 0x61, a), same_screen YES, XLookupString gives 1 bytes: (61) "a" XFilterEvent returns: False Pressing 'Delete' gives: FocusOut event, serial 30, synthetic NO, window 0x2c00001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 30, synthetic NO, window 0x2c00001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 30, synthetic NO, window 0x0, keys: 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 From there I don't know what to do. Help?

    Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >