Search Results

Search found 38755 results on 1551 pages for 'locked files'.

Page 741/1551 | < Previous Page | 737 738 739 740 741 742 743 744 745 746 747 748  | Next Page >

• WP7 “Phantom Data” Source Possibly Revealed?

  - by Bil Simser

  Recently there’s been rumours floating around regarding “phantom” Windows Phone 7 data being magically sent and received on the latest WP7 phones. The news has mostly been floating around twitter so I didn’t pay it much attention. The BBC Technology News picked it up so I thought I would look more into it myself seeing that we have WP7 phones and maybe there was some truth to all this (and more importantly what was the cause). Full disclosure. I don’t have a lot of data points around this. This is from looking at a few phone logs, changing the configuration and looking back again after the change. I haven’t done a clean baseline test nor have I done testing with hundreds of phones. I leave the experience up to the reader to decide. So I went spelunking into the phone logs to see what was up. Most providers will show you data usage, at least on a daily basis. I lucked out with the provider and plan in that they provide hourly breakdowns. Here’s a snapshot from my usage throughout one night. Timestamp Data Usage 12:38:30 AM 2098 Kilobytes 1:30:30 AM 2 Kilobytes 2:38:30 AM 7118 Kilobytes 3:38:30 AM 6622 Kilobytes 4:38:30 AM 76 Kilobytes 5:38:30 AM 29 Kilobytes 6:38:30 AM 19 Kilobytes 7:38:30 AM 20 Kilobytes So a few observations from this data: Data seems to be collected on a regular basis. Looking at some other people phone logs, the times vary but it’s always hourly. There’s not a tremendous amount of data here (about 16 megabytes) but it seems like a lot for 7 hours The phone was connected to my home Wifi during this period Nothing was running and the phone was in a locked state Like I said, not a lot of data but it adds up. 16MB for 7 hours = about 50MB in a 24 hour period. That’s just plain old data being collected (somewhere, somehow) and not actual usage (Marketplace, Email, Browsing, etc.). Besides, when connected to a WiFi network you shouldn’t be charged data usage from your phone company (in theory, YMMV). After reviewing the logs I made a theory that the only thing that could possibly be sending data is the Feedback feature. With no other apps running under lock, what else could it be? In Windows 7 under your Settings the last option is Feedback. This sends feedback to Microsoft to “help improve Windows Phone”. On this page you have three options: Send feedback and use my cellular data connection Send feedback and (presumably) use my WiFi connection Don’t send feedback Knowing what I know about Microsoft, they do use the feedback data. For example some of the placement and inclusion of features in Office 2007 was based on that Feedback data that Office sends (assuming you had opted in). However in the Privacy Statement (it’s long but a good read at least once in your life), the Phone manual, and every other source I could look at there is no information about how much data it’s planning to send, just that it’s sending some data and that “some data charges with your carrier may apply”. Looking back at the logs, I have to wonder. 6MB at 3:30 and *then* 7MB the next hour. That’s a lot of information. And it adds up. 50MB in a 24 hour period X 30 days puts most people over a normal 1GB plan. And frankly why am I paying for a data plan only to have 80% of it chewed up by Microsoft, with no real benefit to me. If they included porn in the 50mb daily transfer I’d be okay with this, but I don’t see any new movies on my phone. So I turned it off. Set Feedback to disabled and wait. I waited. And waited. And generally didn’t use the phone if I could. The next day I went back to look at the data usage logs from the time period after turning the feedback mechanism off. Here are the results. Timestamp Data Usage 1:19:48 PM 0 Kilobytes 2:19:48 PM 0 Kilobytes 3:19:48 PM 0 Kilobytes 4:19:48 PM 678 Kilobytes (took a phone call) 5:19:48 PM 82 Kilobytes 6:19:48 PM 88 Kilobytes 7:20:30 PM 86 Kilobytes (guess they changed their reporting time) 8:20:30 PM 86 Kilobytes 9:20:30 PM 66 Kilobytes 10:20:30 PM 67 Kilobytes 11:20:30 PM 49 Kilobytes 12:20:30 AM 32 Kilobytes 1:20:30 AM 38 Kilobytes 2:20:31 AM 18 Kilobytes 3:20:31 AM 27 Kilobytes 4:20:31 AM 86 Kilobytes 5:20:31 AM 53 Kilobytes 6:20:31 AM 22 Kilobytes 7:22:15 AM 30 Kilobytes (another reporting time change) 8:22:15 AM 29 Kilobytes 9:22:15 AM 74 Kilobytes 10:22:15 AM 154 Kilobytes (phone call) 11:22:15 AM 12 Kilobytes 12:13:27 PM 49 Kilobytes 1:13:27 PM 197 Kilobytes (phone call) Quite a *drastic* change from what Feedback was turned on. I mean for a 24 hour period (sans 3 phone calls) I consumed about 1MB. Still quite a bit of transfer going on but at least it amounts to 30MB per month, not 30MB per day! Like I said this observation is neither scientific or conclusive. You decide what to do but frankly until Microsoft makes this data transfer exempt from your data plan (like that will happen) I would just turn Feedback off. YMMV.

  Read the article

• A Few of My Favorite HTML5 and CSS3 Online Tools

  - by dwahlin

  I really enjoy coding up HTML5, CSS3, and JavaScript applications but there are some things that I’m better off writing with the help of a development tool. For example, CSS3 gradients aren’t exactly the most fun thing to write by hand and the same could be said for animations, transforms, or styles that require various vendor extensions. There are a lot of online tools that can simplify building HTML5/CSS3 sites and increase productivity in the process so I thought I’d put together a post on a few of my favorites tools. HTML5 Boilerplate HTML5 Boilerplate provides a great way to get started building HTML5 sites. It includes many best practices out of the box and even includes a few tricks that many people don’t even know about. The custom download option allows you to pick the features that you want to include in the files that’s generated. You can read more about it here.   Initializr Although HTML5 Boilerplate provides a great foundation for starting HTML5 sites, it focuses on providing a starting shell structure (namely an html page, JavaScript files, and a CSS stylesheet) and doesn’t include much in the way of page content to get started with. Initializer builds on HTML5 Boilerplate and provides an initial test page that can be tweaked to meet your needs. It also provides several different customization options to include/exclude features. CSS3 Maker CSS3 provides a lot of great features ranging from gradient support to rounded corners. Although many of the features are fairly straightforward there are some that are pretty involved such as gradients, animations, and really any styles that require custom vendor extensions to use across browsers. Sure, you can type everything by hand, but sites such as CSS3 Maker provide a visual way to generate CSS3 styles. CSS3, Please! CSS3, Please! is a code generation tool that can be used to generate cross-browser CSS3 styles quickly and easily. All of the main things you can do with CSS3 are available including a clever way to visually generate CSS3 transform styles.       Ultimate CSS Gradient Generator CSS3 Maker (above) has a gradient generator built-in but my favorite tool for creating CSS3 gradients is the Ultimate CSS Gradient Generator. If you’ve created gradients in tools like Photoshop then you’ll love what this tool has to offer especially since it makes it extremely straightforward to work with different gradient stops. @font-face Fonts Although @font-face has been available for awhile, I think fonts are cool and wanted to mention a site that provides a lot of font choices. When used correctly fonts can really enhance a page and when used incorrectly (think Comic Sans) they can absolutely ruin a page. Several sites exist that provide fonts that can be used with @font-face definitions in CSS style sheets. One of my favorites is Font Squirrel.   HTML5 & CSS3 Support and Tests Interested in knowing what HTML5 and CSS3 features a given browser supports? Want to know how various browsers stack up with each other as far as HTML5/CSS3 support. Look no further than the HTML5 & CSS3 Support page or the HTML5 Test page.   CSS3 Easing Animation Tool CSS3 animations aren’t widely supported across browsers right now (I’m not really using them at this point) but they do offer a lot of promise. Creating easings for animations can definitely be a challenge but they’re something that are critical for adding that “professional touch” to your animations. Fortunately you can use the Ceaser CSS Easing Animation Tool to simplify the process and handle animation easing with…...ease.   There are several other online tools that I like but these are some of the ones I find myself using the most. If you have any favorite online tools that simplify working with HTML5 or CSS3 let me know.     For more information about onsite or online training, mentoring and consulting solutions for HTML5, jQuery, .NET, SharePoint or Silverlight please visit http://www.thewahlingroup.com.

  Read the article

• Java Script – Content delivery networks (CDN) can bit you in the butt.

  - by Ryan Ternier

  As much as I love the new CDN’s that Google, Microsoft and a few others have publically released, there are some strong gotchas that could come up and bite you in the ass if you’re not careful. But before we jump into that, for those that are not 100% sure what a CDN is (besides Canadian).   Content Delivery Network. A way of distributing your static content across various servers in different physical locations.  Because this static content is stored on many servers around the world, whenever a user needs to access this content, they are given the closest server to their location for this data. Already you can probably see the immediate bonuses to a system like this: Lower bandwidth Even small script files downloaded thousands of times will start to take a noticeable hit on your bandwidth meter. Less connections/hits to your web server which gives better latency If you manage many servers, you don’t need to manually update each server with scripts. A user will download a script for each website they visit. If a user is redirected to many domains/sub-domains within your web site, they might download many copies of the same file. When a system sees multiple requests from the same  domain, they will ignore the download   Those are just a handful of the many bonuses a CDN will give you. And for the average website, a CDN is great choice. Check out the following CDN links for their solutions: Google AJAX Library: http://code.google.com/apis/ajaxlibs/ Microsoft Ajax library: http://www.asp.net/ajaxlibrary/cdn.ashx The Gotcha There is always a catch. Here are some issues I found with using CDN’s that hopefully can help you make your decision. HTTP / HTTPS If you are running a website behind SSL, make sure that when you reference your CDN data that you use https:// vs. http://. If you forget this users will get a very nice message telling them that their secure connection is trying to access unsecure data. For a developer this is fairly simple, but general users will get a bit anxious when seeing this. Trusted Sites Internet Explorer has this really nifty feature that allows users to specify what sites they trust, and by some defaults IE7 only allows trusted sites to be viewed.  No problem, they set your website as trusted. But what about your CDN? If a user sets your websites to trusted, but not the CDN, they will not download those static files. This has the potential to totally break your web site. Pedantic Network Admins This alone is sometimes the killer of projects. However, always be careful when you are going to use a CDN for a professional project. If a network / security admin sees that you’re referencing an outside source, or that a call from a website might hit an outside domain.. panties will be bunched, emails will be spewed out and well, no one wants that.

  Read the article

• SnagIt Live Writer Plug-in Updated

  - by Rick Strahl

  Ah, I love SnagIt from TechSmith and I use the heck out of it almost every day. So no surprise that I've decided some time ago to integrate SnagIt into a few applications that require screen shots extensively. It's been a while since I've posted an update to my small SnagIt Windows Live Writer plug-in. There have been a few nagging issues that have crept up with recent changes in the way SnagIt handles captures in recent versions and they have been addressed in this update of SnagIt. Personally I love SnagIt and use it extensively mostly for blogging, but also for writing documentation and articles etc. While there are many other (and also free) tools out there to do basic screen captures, SnagIt continues to be the most convenient tool for me with its nice built in capture and effects editor that makes creating professional looking captures childishly simple. And maybe even more importantly: SnagIt has a COM interface that can be automated and  makes it super easy to embed into other applications. I've built plugins for SnagIt as well as for one of my company's own tools, Html Help Builder. If you use the Windows Live Writer offline WebLog Editor to write blog posts and have a copy of SnagIt it's probably worth your while to check this out if you haven't already. In case you haven't, this plugin integrates SnagIt with Live Writer so you can easily capture and edit content and embed it into a post. Captures are shown in the SnagIt Preview editor where you can edit the image and apply image markup or effects, before selecting Finish (or Cancel). The final image can then be pasted directly into your Live Writer post. When installed the SnagIt plug-in shows up on the PlugIn list or in the Plug-Ins toolbar shortcut: Once you select the Plug in you get the capture window that allows you to customize the capture process which includes most of the useful SnagIt capture options: Once you're done capturing the image shows up in the SnagIt Image Editor and you can crop, mark up and apply effects. When done you click the Finish button and the image is embedded right into your blog post. Easy - how do you think the images in this blog entry got in here? The beauty of SnagIt is that it's all easily integrated - Capturing, editing and embedding, it only takes a few seconds to do it all especially if you save image effect presets in SnagIt. What's updated The main issue addressed in this update has to do with the plug-in updates the Live Writer window. When a capture starts Live Writer gets minimized to get out of the way to let you pick your capture source. When the capture is complete and the image has been embedded Live Writer is activated once again. Recent versions of SnagIt however had changed the Window positioning of SnagIt so that Live Writer ended up popping up back behind the SnagIt window which was pretty annoying. This update pushes Live Writer back to the top of the window stack using some delaying tactics in the code. There have also been a few small changes to the way the code interacts with the COM object which is more reliable if a capture fails or SnagIt blows up or is locked because it's already in a capture outside of the automation interface. Source Code SnagIt Automation is something I actually use a lot. As mentioned I've integrated this automation into Live Writer as well as my documentation tool Html Help Builder, which I use just about daily. The SnagIt integration has a similar interface in that application and provides similar functionality. It's quite useful to integrate SnagIt into other applications. Because it's quite useful to embed SnagIt into other apps there's source code that you can download and embed into your own applications. The code includes both the dialog class that is automated from Live Writer, as well as the basic capture component that captures images to a disk file. Resources Download the SnagIt Capture Plug-in Installer An MSI installer that you can run that will install the plug-in into Live Writer's PlugIns directory. Source Code to the SnagIt Capture Plug-in Contains the plug-in assembly, as well as the source code to the plug-in and the setup project.© Rick Strahl, West Wind Technologies, 2005-2011Posted in Live Writer  WebLog   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Tough Decisions

  - by Johnm

  There was once a thriving business that employed two Database Administrators, Sam and Jim. Both DBAs were certified, educated and highly talented in their skill sets. During lunch breaks these two DBAs were often found together discussing best practices, troubleshooting techniques and the latest release notes for the upcoming version of SQL Server. They genuinely loved what they did. The maintenance of the first database was the responsibility of Sam. He was the architect of this server's setup and he was very meticulous in its configuration. He regularly monitored the health of the database, validated backup files and regularly adhered to the best practices that were advocated by well respected professionals. He was very proud of the fact that there was never a database that he managed that lost data or performed poorly. The maintenance of the second database was the responsibility of Jim. He too was the architect of this server's setup. At the time that he built this server, his understanding of the finer details of configuration were not as clear as they are today. The server was build on a shoestring budget and with very little time for testing and implementation. Jim often monitored the health of the database; but in more of a reactionary mode due to user complaints of slowness or failed transactions. Deadlocks abounded and the backup files were never validated. One day, the announcement was made that revealed that the business had hit financially hard times. Budgets were being cut, limitation on spending was implemented and the reduction in full-time staff was required. Since having two DBAs was regarded a luxury by many, this meant that either Sam or Jim were about to find themselves out of a job. Sam and Jim's boss, Frank, was faced with a very tough decision. Sam's performance was flawless. His techniques and practices were perfection. The databases he managed were reliable and efficient. His solutions are "by the book". When given a task it is certain that, while it may take a little longer, it will be done right the first time. Jim's techniques and practices were not perfect; but effective and responsive. He made mistakes regularly; but he shows that he learns from them and they often result in innovative solutions. When given a task it is certain that, while the results may require some tweaking, it will be done on time and under budget. You are Frank's best friend. He approaches you and presents this scenario. He must layoff one of his valued DBAs the very next morning. Frank asks you: "All else being equal, who would you let go? and Why?" Another pertinent question is raised: "Regardless of good times or bad, if you had to choose, which DBA would you want on your team when tough challenges arise?" Your response is. (This is where you enter a comment below)

  Read the article

• 2d movement solution

  - by Phil

  Hi! I'm making a simple top-down tank game on the ipad where the user controls the movement of the tank with the left "joystick" and the rotation of the turret with the right one. I've spent several hours just trying to get it to work decently but now I turn to the pros :) I have two referencial objects, one for the movement and one for the rotation. The referencial objects always stay max two units away from the tank and I use them to tell the tank in what direction to move. I chose this approach to decouple movement and rotational behaviour from the raw input of the joysticks, I believe this will make it simpler to implement whatever behaviour I want for the tank. My problem is 1; the turret rotates the long way to the target. With this I mean that the target can be -5 degrees away in rotation and still it rotates 355 degrees instead of -5 degrees. I can't figure out why. The other problem is with the movement. It just doesn't feel right to have the tank turn while moving. I'd like to have a solution that would work as well for the AI as for the player. A blackbox function for the movement where the player only specifies in what direction it should move and it moves there under the constraints that are imposed on it. I am using the standard joystick class found in the Unity iPhone package. This is the code I'm using for the movement: public class TankFollow : MonoBehaviour { //Check angle difference and turn accordingly public GameObject followPoint; public float speed; public float turningSpeed; void Update() { transform.position = Vector3.Slerp(transform.position, followPoint.transform.position, speed * Time.deltaTime); //Calculate angle var forwardA = transform.forward; var forwardB = (followPoint.transform.position - transform.position); var angleA = Mathf.Atan2(forwardA.x, forwardA.z) * Mathf.Rad2Deg; var angleB = Mathf.Atan2(forwardB.x, forwardB.z) * Mathf.Rad2Deg; var angleDiff = Mathf.DeltaAngle(angleA, angleB); //print(angleDiff.ToString()); if (angleDiff > 5) { //Rotate to transform.Rotate(new Vector3(0, (-turningSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else if (angleDiff < 5) { transform.Rotate(new Vector3(0, (turningSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else { } transform.position = new Vector3(transform.position.x, 0, transform.position.z); } } And this is the code I'm using to rotate the turret: void LookAt() { var forwardA = -transform.right; var forwardB = (toLookAt.transform.position - transform.position); var angleA = Mathf.Atan2(forwardA.x, forwardA.z) * Mathf.Rad2Deg; var angleB = Mathf.Atan2(forwardB.x, forwardB.z) * Mathf.Rad2Deg; var angleDiff = Mathf.DeltaAngle(angleA, angleB); //print(angleDiff.ToString()); if (angleDiff - 180 > 1) { //Rotate to transform.Rotate(new Vector3(0, (turretSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else if (angleDiff - 180 < -1) { transform.Rotate(new Vector3(0, (-turretSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); print((angleDiff - 180).ToString()); } else { } } Since I want the turret reference point to turn in relation to the tank (when you rotate the body, the turret should follow and not stay locked on since it makes it impossible to control when you've got two thumbs to work with), I've made the TurretFollowPoint a child of the Turret object, which in turn is a child of the body. I'm thinking that I'm making it too difficult for myself with the reference points but I'm imagining that it's a good idea. Please be honest about this point. So I'll be grateful for any help I can get! I'm using Unity3d iPhone. Thanks!

  Read the article

• SQL SERVER – Understanding XML – Contest Win Joes 2 Pros Combo (USD 198) – Day 5 of 5

  - by pinaldave

  August 2011 we ran a contest where every day we give away one book for an entire month. The contest had extreme success. Lots of people participated and lots of give away. I have received lots of questions if we are doing something similar this month. Absolutely, instead of running a contest a month long we are doing something more interesting. We are giving away USD 198 worth gift every day for this week. We are giving away Joes 2 Pros 5 Volumes (BOOK) SQL 2008 Development Certification Training Kit every day. One copy in India and One in USA. Total 2 of the giveaway (worth USD 198). All the gifts are sponsored from the Koenig Training Solution and Joes 2 Pros. The books are available here Amazon | Flipkart | Indiaplaza How to Win: Read the Question Read the Hints Answer the Quiz in Contact Form in following format Question Answer Name of the country (The contest is open for USA and India residents only) 2 Winners will be randomly selected announced on August 20th. Question of the Day: Is following XML a well formed XML Document? <?xml version=”1.0″?> <address> <firstname>Pinal</firstname> <lastname>Dave</lastname> <title>Founder</title> <company>SQLAuthority.com</company> </address> a) Yes b) No c) I do not know Query Hints: BIG HINT POST A common observation by people seeing an XML file for the first time is that it looks like just a bunch of data inside a text file. XML files are text-based documents, which makes them easy to read.  All of the data is literally spelled out in the document and relies on a just a few characters (<, >, =) to convey relationships and structure of the data.  XML files can be used by any commonly available text editor, like Notepad. Much like a book’s Table of Contents, your first glance at well-formed XML will tell you the subject matter of the data and its general structure. Hints appearing within the data help you to quickly identify the main theme (similar to book’s subject), its headers (similar to chapter titles or sections of a book), data elements (similar to a book’s characters or chief topics), and so forth. We’ll learn to recognize and use the structural “hints,” which are XML’s markup components (e.g., XML tags, root elements). The XML Raw and Auto modes are great for displaying data as all attributes or all elements – but not both at once. If you want your XML stream to have some of its data shown in attributes and some shown as elements, then you can use the XML Path mode. If you are using an XML Path stream, then by default all values will be shown as elements. However, it is possible to pick one or more elements to be shown with an attribute(s) as well. Additional Hints: I have previously discussed various concepts from SQL Server Joes 2 Pros Volume 5. SQL Joes 2 Pros Development Series – OpenXML Options SQL Joes 2 Pros Development Series – Preparing XML in Memory SQL Joes 2 Pros Development Series – Shredding XML SQL Joes 2 Pros Development Series – Using Root With Auto XML Mode SQL Joes 2 Pros Development Series – Using Root With Auto XML Mode SQL Joes 2 Pros Development Series – What is XML? SQL Joes 2 Pros Development Series – What is XML? – 2 Next Step: Answer the Quiz in Contact Form in following format Question - Answer Name of the country (The contest is open for USA and India) Bonus Winner Leave a comment with your favorite article from the “additional hints” section and you may be eligible for surprise gift. There is no country restriction for this Bonus Contest. Do mention why you liked it any particular blog post and I will announce the winner of the same along with the main contest. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Download YouTube Videos the Easy Way

  - by Trevor Bekolay

  You can’t be online all the time, and despite the majority of YouTube videos being nut-shots and Lady Gaga parodies, there is a lot of great content that you might want to download and watch offline. There are some programs and browser extensions to do this, but we’ve found that the easiest and quickest method is a bookmarklet that was originally posted on the Google Operating System blog (it’s since been removed). It will let you download standard quality and high-definition movies as MP4 files. Also, because it’s a bookmarklet, it will work on any modern web browser, and on any operating system! Installing the bookmarket is easy – just drag and drop the Get YouTube video link below to the bookmarks bar of your browser of choice. If you’ve hidden the bookmark bar, in most browsers you can right-click on the link and save it to your bookmarks. Get YouTube video   With the bookmarklet available in your browser, go to the YouTube video that you’d like to download. Click on the Get YouTube video link in your bookmarks bar, or in the bookmarks menu, wherever you saved it earlier. You will notice some new links appear below the description of the video. If you download the standard definition file, it will save as “video.mp4” by default. However, if you download the high definition file, it will save with the same name as the title of the video. There are many methods of downloading YouTube videos…but we think this is the easiest and quickest method. You don’t have to install anything or use up resources, but you can still get a link to download an MP4 with one click. Do you use a different method to download Youtube videos? Let us know about it in the comments! javascript:(function(){if(document.getElementById(’download-youtube-video’))return;var args=null,video_title=null,video_id=null,video_hash=null;var download_code=new Array();var fmt_labels={‘18′:’standard%20MP4′,’22′:’HD%20720p’,'37′:’HD%201080p’};try{args=yt.getConfig(’SWF_ARGS’);video_title=yt.getConfig(’VIDEO_TITLE’)}catch(e){}if(args){var fmt_url_map=unescape(args['fmt_url_map']);if(fmt_url_map==”)return;video_id=args['video_id'];video_hash=args['t'];video_title=video_title.replace(/[%22\'\?\\\/\:\*%3C%3E]/g,”);var fmt=new Array();var formats=fmt_url_map.split(’,');var format;for(var i=0;i%3Cformats.length;i++){var format_elems=formats[i].split(’|');fmt[format_elems[0]]=unescape(format_elems[1])}for(format in fmt_labels){if(fmt[format]!=null){download_code.push(’%3Ca%20href=\”+(fmt[format]+’&title=’+video_title)+’\'%3E’+fmt_labels[format]+’%3C/a%3E’)}elseif(format==’18′){download_code.push(’%3Ca%20href=\’http://www.youtube.com/get_video?fmt=18&video_id=’+video_id+’&t=’+video_hash+’\'%3E’+fmt_labels[format]+’%3C/a%3E’)}}}if(video_id==null||video_hash==null)return;var div_embed=document.getElementById(’watch-embed-div’);if(div_embed){var div_download=document.createElement(’div’);div_download.innerHTML=’%3Cbr%20/%3E%3Cspan%20id=\’download-youtube-video\’%3EDownload:%20′+download_code.join(’%20|%20′)+’%3C/span%3E’;div_embed.appendChild(div_download)}})() Similar Articles Productive Geek Tips Watch YouTube Videos in Cinema Style in FirefoxDownload YouTube Videos with Cheetah YouTube DownloaderStop YouTube Videos from Automatically Playing in FirefoxImprove YouTube Video Viewing in Google ChromeConvert YouTube Videos to MP3 with YouTube Downloader TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

  Read the article

• SharePoint 2010 Hosting :: SharePoint 2010 Custom Web Template

  - by mbridge

  SharePoint 2010 offers some changes and additions to the SharePoint 2007 approach. Site definitions and publishing providers remain largely the same, but site templates created from the SharePoint UI or SharePoint Designer are now saved to a .WSP file, the same solution deployment packaging file format used for deploying custom SharePoint solutions. Site Templates saved to a .WSP solution file can be imported into Visual Studio for additional customization. Introducing the WebTemplate Feature Element The WebTemplate element, introduced in SharePoint 2010, allows site templates to be defined and deployed as a Feature as part of a solution package. A WebTemplate element feature can be used to deploy site templates in either a Farm or Sandbox solution - without modification. If deployed as a Farm feature and solution, site templates will appear in the site collection provisioning page in Central Administration and can be used to provision new site collections, or within a Site Collection to create sub-sites. If deployed as a Site feature and Sandbox solution, site templates will appear within the site collection to support creating a root site or sub-sites. Creating a new WebTemplate Feature in Visual Studio 2010 In addition to supporting the ability to save and import Site Templates created from the SharePoint UI into Visual Studio for customization, it can also be used to create new site templates from scratch. In the following sample we will walk through how to create a new WebTemplate solution based on  a customized version of the out-of-box Blank Site. 1. Create a new Empty SharePoint Project in Visual Studio 2010. 2. Add a new Empty Element to the project. we like to create folders for each type of element in our solution, so in our sample, we have created a Web Templates folder, and then added the BLANKENT element. NOTE: The Elements folder MUST share the same name as the WebTemplate name property. 3. Open the empty Elements.xml and add the <WebTemplate /> element block. 4. Copy the default.aspx and ONET.XML files from the STS site definition location at 14\TEMPLATES\Site Templates\STS. We will customize the ONET.XML in the next section. Open the properties for each file and set the Deployment Type to ElementFile. This ensures the files are deployed with the Element when included in a Feature. 5. By default a new feature is added to the solution for you automatically when a new element is added to the solution. Rename and edit the feature as appropriate. Select Farm for the scope to deploy the WebTemplate to the entire farm, or Site for a sandboxed solution. Customize the ONET.XML At this point, you have a working WebTemplate solution that will deploy the identical site to the out-of-box Blank Site, however the ONET.XML supporting the STS site definition contains 3 configurations – essentially 3 separate site templates and can be simplified before customizing. In the following sample, we have trimmed the ONET.XML to the essentials for a single Site Template, and added references to the <SiteFeatures /> and <WebFeatures /> elements to include the SharePoint Standard and Enterprise features. We have left the top-level navigation bar, and the default page module intact, but removed all other extraneous markup.

  Read the article

• How to I do install DB2 ODBC?

  - by Justin

  I have been trying, with no success, to install a IBM DB2 ODBC driver so that my PHP server can connect to a database. I've tried installing the db2_connect and get all sorts of problems, I tried install I Access for Linux and the RPM did not install right nor did using alien breed any useful results. I've also tried the DB2 Runtime v8.1, no success. If I attempt to run the rpm it claims I need dependencies that I can't find in apt-get. Yum is also not very helpful as it appears I don't have any repositories installed or lists... Running the simple RPM gives me this result in terminal: # rpm -ivh iSeriesAccess-7.1.0-1.0.x86_64.rpm rpm: RPM should not be used directly install RPM packages, use Alien instead! rpm: However assuming you know what you are doing... error: Failed dependencies: /bin/ln is needed by iSeriesAccess-7.1.0-1.0.x86_64 /sbin/ldconfig is needed by iSeriesAccess-7.1.0-1.0.x86_64 /bin/rm is needed by iSeriesAccess-7.1.0-1.0.x86_64 /bin/sh is needed by iSeriesAccess-7.1.0-1.0.x86_64 libc.so.6()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libc.so.6(GLIBC_2.2.5)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libc.so.6(GLIBC_2.3)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libdl.so.2()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libdl.so.2(GLIBC_2.2.5)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libgcc_s.so.1()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libm.so.6()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libm.so.6(GLIBC_2.2.5)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libodbcinst.so.1()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libodbc.so.1()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libpthread.so.0()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libpthread.so.0(GLIBC_2.2.5)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libpthread.so.0(GLIBC_2.3.2)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 librt.so.1()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 librt.so.1(GLIBC_2.2.5)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libstdc++.so.6()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libstdc++.so.6(CXXABI_1.3)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libstdc++.so.6(GLIBCXX_3.4)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 Using alien and running the dkpg gives me thes headaque: $ alien iSeriesAccess-7.1.0-1.0.x86_64.rpm --scripts # dpkg -i iseriesaccess_7.1.0-2_amd64.deb (Reading database ... 127664 files and directories currently installed.) Preparing to replace iseriesaccess 7.1.0-2 (using iseriesaccess_7.1.0-2_amd64.deb) ... Unpacking replacement iseriesaccess ... post uninstall processing for iSeriesAccess 1.0...upgrade /var/lib/dpkg/info/iseriesaccess.postrm: line 8: [: upgrade: integer expression expected Setting up iseriesaccess (7.1.0-2) ... post install processing for iSeriesAccess 1.0...configure iSeries Access ODBC Driver has been deleted (if it existed at all) because its usage count became zero odbcinst: Driver installed. Usage count increased to 1. Target directory is /etc odbcinst: Driver installed. Usage count increased to 3. Target directory is /etc Processing triggers for libc-bin ... ldconfig deferred processing now taking place So it seems the files installed right, well my odbc driver shows up but db2cli.ini is no where to be found. So several questions. Is there a better alternative to connect php to db2, say an ubuntu package I can just install? Can someone direct me to the steps that makes my ubuntu server works well with the RPM so I can build my db2 instance? Also remember I'm connection to an I Series remotely. I'm not using the DB2 Express C thing, even if I did try it to get the db2 php functions to work. And I don't have zend but I think I have every other package on the ubuntu repositories. Help, thank you!

  Read the article

• Why is Apache ignoring VirtualHost directive for first name in hosts file?

  - by Peter Taylor

  Standard pre-emptive disclaimer: host names, IP addresses, and directories are anonymised. Problem We have a server with Apache 2.2 (WAMP) listening on one IP and IIS listening on another. An ASP.Net application running under IIS needs to do some simple GETs from the PHP applications running under Apache to build a unified search results page. This is a virtual server, so the internal IPs are mapped somehow to external ones. The internal DNS system doesn't resolve the publicly published names under which the applications are accessed externally, so the obvious solution was to add them to etc/hosts with the internal IP address: 127.0.0.1 localhost # 10.0.1.17 is the IP address Apache listens on 10.0.1.17 phpappone.example.com 10.0.1.17 phpapptwo.example.com After restarting Apache, phpappone.example.com stopped working. Instead of returning pages from that app, Apache was returning pages from the default site. The other PHP apps worked fine. Relevant configuration httpd.conf, summarised, says: ServerAdmin [email protected] ServerRoot "c:/server/Apache2" ServerName www.example.com Listen 10.0.1.17:80 Listen 10.0.1.17:443 # Not obviously related config options elided # Nothing obviously astandard # If you want more details, post a comment DocumentRoot "c:/server/Apache2/htdocs" <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> # Fallback for unknown host names <Directory "c:/server/Apache2/htdocs"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> # PHP apps common config <Directory "C:/Inetpub/wwwroot/phpapps"> Options FollowSymLinks -Indexes +ExecCGI AllowOverride All Order Allow,Deny Allow from All </Directory> # Virtual hosts NameVirtualHost 10.0.1.17:80 NameVirtualHost 10.0.1.17:443 <VirtualHost _default_:80> </VirtualHost> <VirtualHost _default_:443> SSLEngine On SSLCertificateFile "certs/example.crt" SSLCertificateKeyFile "certs/example.key" </VirtualHost> Include conf/vhosts/*.conf and the vhosts files are e.g. <VirtualHost 10.0.1.17:80> ServerName phpappone.example.com DocumentRoot "c:/Inetpub/wwwroot/phpapps/phpappone" </VirtualHost> <VirtualHost 10.0.1.17:443> ServerName phpappone.example.com DocumentRoot "c:/Inetpub/wwwroot/phpapps/phpappone" SSLEngine On SSLCertificateFile "certs/example.crt" SSLCertificateKeyFile "certs/example.key" </VirtualHost> Buggy behaviour or our misunderstanding? The documentation for name-based virtual hosts says that Now when a request arrives, the server will first check if it is using an IP address that matches the NameVirtualHost. If it is, then it will look at each <VirtualHost> section with a matching IP address and try to find one where the ServerName or ServerAlias matches the requested hostname. If it finds one, then it uses the configuration for that server. If no matching virtual host is found, then the first listed virtual host that matches the IP address will be used. Yet that isn't what we observe. It seems that if the hostname is the first hostname listed against the IP address in etc/hosts then it uses the configuration from the main server and skips the virtual host lookup. Workarounds The workaround we've put in place for the time being is to add a fake line to the hosts file: 127.0.0.1 localhost # 10.0.1.17 is the IP address Apache listens on 10.0.1.17 fakename.example.com 10.0.1.17 phpappone.example.com 10.0.1.17 phpapptwo.example.com This fixes the problem, but it's not very elegant. In addition, it seems a bit brittle: reordering lines in the hosts file (or deleting the nonsense value) can break it. The other obvious workaround is to make the main server configuration match that of the troublesome virtual host, but that is equally brittle. A third option, which is just ugly, would be to change the ASP.Net code to take separate config items for the IP address and the hostname and to implement HTTP manually. Ugh. The question Is there a good solution to this problem which localises any "Do not touch this!" explanations to the Apache config files?

  Read the article

• Creating a Reverse Proxy with URL Rewrite for IIS

  - by OWScott

  There are times when you need to reverse proxy through a server. The most common example is when you have an internal web server that isn’t exposed to the internet, and you have a public web server accessible to the internet. If you want to serve up traffic from the internal web server, you can do this through the public web server by creating a tunnel (aka reverse proxy). Essentially, you can front the internal web server with a friendly URL, even hiding custom ports. For example, consider an internal web server with a URL of http://10.10.0.50:8111. You can make that available through a public URL like http://tools.mysite.com/ as seen in the following image. The URL can be made public or it can be used for your internal staff and have it password protected and/or locked down by IP address. This is easy to do with URL Rewrite and IIS. You will also need Application Request Routing (ARR) installed even though for a simple reverse proxy you won’t use most of ARR’s functionality. If you don’t already have URL Rewrite and ARR installed you can do so easily with the Web Platform Installer. A lot can be said about reverse proxies and many different situations and ways to route the traffic and handle different URL patterns. However, my goal here is to get you up and going in the easiest way possible. Then you can dig in deeper after you get the base configuration in place. URL Rewrite makes a reverse proxy very easy to set up. Note that the URL Rewrite Add Rules template doesn’t include Reverse Proxy at the server level. That’s not to say that you can’t create a server-level reverse proxy, but the URL Rewrite rules template doesn’t help you with that. Getting Started First you must create a website on your public web server that has the public bindings that you need. Alternately, you can use an existing site and route using conditions for certain traffic. After you’ve created your site then open up URL Rewrite at the site level. Using the “Add Rule(s)…” template that is opened from the right-hand actions pane, create a new Reverse Proxy rule. If you receive a prompt (the first time) that the proxy functionality needs to be enabled, select OK. This is telling you that a proxy can route traffic outside of your web server, which happens to be our goal in this case. Be aware that reverse proxy rules can be dangerous if you open sites from inside you network to the world, so just be aware of what you’re doing and why. The next and final step of the template asks a few questions. The first textbox asks the name of the internal web server. In our example, it’s 10.10.0.50:8111. This can be any URL, including a subfolder like internal.mysite.com/blog. Don’t include the http or https here. The template assumes that it’s not entered. You can choose whether to perform SSL Offloading or not. If you leave this checked then all requests to the internal server will be over HTTP regardless of the original web request. This can help with performance and SSL bindings if all requests are within a trusted network. If the network path between the two web servers is not completely trusted and safe then uncheck this. Next, the template enables you to create an outbound rule. This is used to rewrite links in the page to look like your public domain name rather than the internal domain name. Outbound rules have a lot of CPU overhead because the entire web content needs to be parsed and updated. However, if you need it, then it’s well worth the extra CPU hit on the web server. If you check the “Rewrite the domain names of the links in HTTP responses” checkbox then the From textbox will be filled in with what you entered for the inbound rule. You can enter your friendly public URL for the outbound rule. This will essentially replace any reference to 10.10.0.50:8111 (or whatever you enter) with tools.mysite.com in all <a>, <form>, and <img> tags on your site. That’s it! Well, there is a lot more that you can do, this but will give you the base configuration. You can now visit www.mysite.com on your public web server and it will serve up the site from your internal web server. You should see two rules show up; one inbound and one outbound. You can edit these, add conditions, and tweak them further as needed. One common issue that can occur without outbound rules has to do with compression. If you run into errors with the new proxied site, try turning off compression to confirm if that’s the issue. Here’s a link with details on how to deal with compression and outbound rules. I hope this was helpful to get started and to see how easy it is to create a simple reverse proxy using URL Rewrite for IIS.

  Read the article

• SQL Server source control from Visual Studio

  - by David Atkinson

  Developers have long since had to context switch between two IDEs, Visual Studio for application code development and SQL Server Management Studio for database development. While this is accepted, especially given the richness of the database development feature set in SSMS, loading a separate tool can seem a little overkill. This is where SQL Connect comes in. This is an add-in to Visual Studio that provides a connected development experience for the SQL Server developer. Connected database development involves modifying a development sandbox database, as opposed to offline development, where SQL text files are modified independently of the database. One of the main complaints of Data Dude (VS DBPro) is that it enforces the offline approach. This gripe is what SQL Connect addresses. If you don't already use SQL Source Control, you can get up and running with SQL Connect by adding a new project to your Visual Studio solution as follows: Then choose your existing development database and you're ready to go. If you already use SQL Source Control, you will need to link SQL Connect to your existing database scripts folder repository, so SQL Connect and SQL Source Control can be used collaboratively (note that SQL Source Control v.3.0.9.18 or later is required). Locate the repository (this can be found in the Setup tab in SQL Source Control). .and create a working folder for it (here I'm using TortoiseSVN). Back in Visual Studio, locate the SQL Connect panel (in the View menu if it hasn't auto loaded) and select Import SQL Source Control project Locate your working folder and click Import. This creates a Red Gate database project under your solution: From here you can modify your development database, and manage your changes in source control. To associate your development database with the project, right click on the project node, select Properties, set the database and Save. Now you're ready to make some changes. Locate the object you'd like to modify in the Solution Explorer, and double click it to invoke a query window or table designer. You also have the option to edit the creation SQL directly using Edit SQL File in Project. Keeping the development database and Visual Studio project in sync is as easy as clicking on a button. One you've made your change, you can use whichever mechanism you choose to commit to source control. Here I'm using the free open-source AnkhSVN to integrate Subversion with Visual Studio. Maintaining your database in a Visual Studio solution means that you can commit database changes and application code changes in the same changeset. This is desirable if you have continuous integration set up as you want to ensure that all files related to a change are committed atomically, so you avoid an interim "broken build". More discussion on SQL Connect and its benefits can be found in the following article on Simple Talk: No More Disconnected SQL Development in Visual Studio The SQL Connect project team is currently assessing the backlog for the next development effort, and they'd appreciate your feature suggestions, as well as your votes on their suggestions site: http://redgate.uservoice.com/forums/140800-sql-connect-for-visual-studio- A 28-day free trial of SQL Connect is available from the Red Gate website. Technorati Tags: SQL Server

  Read the article

• Non-standard installation (installing Linux from Linux)

  - by Evan Plaice

  So, here's my setup. I have one partition with the newest version installed, a second partition with an older version installed (as a backup just in case), a swap partition that both share, and a boot partition so the bootloader doesn't need to be setup after each upgrade. Partitions: sda1 ext3 /boot sda2 ext4 / (current version) sda3 ext4 / (old version) sda4 swap /swap sda5 ntfs (contains folders symbolically linked to /home on /) So far it has been a very good setup. I can create new boot loaders without screwing it up and adding my personal files into a new install is as simple as creating some symbolic links (the partition is NTFS in case I need to load windows on the system again). Here's the issue. I'd like to be able to drop the install into /distro on the current version and install a new version on / on the old version effectively replacing/upgrading it. The goal is to be able to just swap out new versions as they are released while maintaining redundancy in case I don't like th update. So far I have: downloaded the install.iso created a folder in /distro copied the install.iso into /distro extracted vmlinuz and initrd.lz into /distro Then I modified /boot/grub/menu.lst with the following entry: title Install Linux root (hd0,1) kernel /distro/vmlinuz initrd /distro/initrd.lz vmlinuz loads perfectly but it says it can't find initrd.lz on boot. I have also tried to uncompress the image with: unlzma < initrd.lz > initrd.img And, updating the menu.lst file to match; but that doesn't work either. I'm assuming that vmlinuz (linux kernel) loads, fires up the virtual filesystem by creating a ramdisk (initrd), mounts the iso, and launches the installer. Am I missing something here? Update: First, I wanted to say that the accepted answer would have been the best option if I was doing a normal Ubuntu install. Unfortunately, I was installing Linux Mint (which lacks the script needed to make debootstrap work. So the problem I with the above approach was, I was missing the command that vmlinuz (linux kernel) needed to execute to start boot into LiveCD mode. By looking in the /boot/grub/grub.cfg file I found what I was missing. Although this method will work, it requires that the installation files reside on their own partition. I took the easy route and used unetbootin to drop the LiveCD on a usb drive and booted from that. Like I said before. Debootstrap would have been the ideal solution here. Even though I couldn't use it I wrote down the steps it would've taken to use it. Step One: Format sda3 (the partition with the old copy of linux that's being overwritten) I used gparted to format it as ext4 from within the current linux install. How this is done varies based on what tools you prefer to use. Step Two: Mount the newly formatted partition (we'll call the mount ubuntu for simplicity) sudo mkdir /mnt/ubuntu sudo mount -o -loop /dev/sda3 /mnt/ubuntu Step Three: Get debootstrap sudo apt-get install debootstrap Step Four: Mount the install disk (replace ubuntu.iso with the name if your install disk) sudo mkdir /media/cdrom sudo mount -o loop ~/ubuntu.iso /media/cdrom Step Five: Install the OS using debootstrap (replace fiesty with the version you're installing and amd64 with your processor's architecture) sudo debootstrap --arch amd64 fiesty /mnt/ubuntu file:/media/cdrom The settings here varies. While I loaded debootstrap using an install iso, you can also have debootstrap automatically download and install if with a repository link (While most of these repositories contain debian versions I'm still not clear as to whether Ubuntu has similar repositories). Here a list of the debian package repositories and their mirrors. This is how you'd deploy debootstrap if you were doing it directly from a repository: sudo debootstrap --arch amd64 squeeze /mnt/debian http://ftp.us.debian.org/debian Here's the link that I primarily used to figure this out.

  Read the article

• 2d tank movement and turret solution

  - by Phil

  Hi! I'm making a simple top-down tank game on the ipad where the user controls the movement of the tank with the left "joystick" and the rotation of the turret with the right one. I've spent several hours just trying to get it to work decently but now I turn to the pros :) I have two referencial objects, one for the movement and one for the rotation. The referencial objects always stay max two units away from the tank and I use them to tell the tank in what direction to move. I chose this approach to decouple movement and rotational behaviour from the raw input of the joysticks, I believe this will make it simpler to implement whatever behaviour I want for the tank. My problem is 1; the turret rotates the long way to the target. With this I mean that the target can be -5 degrees away in rotation and still it rotates 355 degrees instead of -5 degrees. I can't figure out why. The other problem is with the movement. It just doesn't feel right to have the tank turn while moving. I'd like to have a solution that would work as well for the AI as for the player. A blackbox function for the movement where the player only specifies in what direction it should move and it moves there under the constraints that are imposed on it. I am using the standard joystick class found in the Unity iPhone package. This is the code I'm using for the movement: public class TankFollow : MonoBehaviour { //Check angle difference and turn accordingly public GameObject followPoint; public float speed; public float turningSpeed; void Update() { transform.position = Vector3.Slerp(transform.position, followPoint.transform.position, speed * Time.deltaTime); //Calculate angle var forwardA = transform.forward; var forwardB = (followPoint.transform.position - transform.position); var angleA = Mathf.Atan2(forwardA.x, forwardA.z) * Mathf.Rad2Deg; var angleB = Mathf.Atan2(forwardB.x, forwardB.z) * Mathf.Rad2Deg; var angleDiff = Mathf.DeltaAngle(angleA, angleB); //print(angleDiff.ToString()); if (angleDiff > 5) { //Rotate to transform.Rotate(new Vector3(0, (-turningSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else if (angleDiff < 5) { transform.Rotate(new Vector3(0, (turningSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else { } transform.position = new Vector3(transform.position.x, 0, transform.position.z); } } And this is the code I'm using to rotate the turret: void LookAt() { var forwardA = -transform.right; var forwardB = (toLookAt.transform.position - transform.position); var angleA = Mathf.Atan2(forwardA.x, forwardA.z) * Mathf.Rad2Deg; var angleB = Mathf.Atan2(forwardB.x, forwardB.z) * Mathf.Rad2Deg; var angleDiff = Mathf.DeltaAngle(angleA, angleB); //print(angleDiff.ToString()); if (angleDiff - 180 > 1) { //Rotate to transform.Rotate(new Vector3(0, (turretSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else if (angleDiff - 180 < -1) { transform.Rotate(new Vector3(0, (-turretSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); print((angleDiff - 180).ToString()); } else { } } Since I want the turret reference point to turn in relation to the tank (when you rotate the body, the turret should follow and not stay locked on since it makes it impossible to control when you've got two thumbs to work with), I've made the TurretFollowPoint a child of the Turret object, which in turn is a child of the body. I'm thinking that I'm making it too difficult for myself with the reference points but I'm imagining that it's a good idea. Please be honest about this point. So I'll be grateful for any help I can get! I'm using Unity3d iPhone. Thanks!

  Read the article

• Slow boot on Ubuntu 12.04

  - by Hailwood

  My Ubuntu is booting really slow (Windows is booting faster...). I am using Ubuntu a Dell Inspiron 1545 Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, 4GB Ram, 500GB HDD running Ubuntu 12.04 with gnome-shell 3.4.1. After running dmesg the culprit seems to be this section, in particular the last three lines: [26.557659] ADDRCONF(NETDEV_UP): eth0: link is not ready [26.565414] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.355355] Console: switching to colour frame buffer device 170x48 [27.362346] fb0: radeondrmfb frame buffer device [27.362347] drm: registered panic notifier [27.362357] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 [27.617435] init: udev-fallback-graphics main process (1049) terminated with status 1 [30.064481] init: plymouth-stop pre-start process (1500) terminated with status 1 [51.708241] CE: hpet increased min_delta_ns to 20113 nsec [59.448029] eth2: no IPv6 routers present But I have no idea how to start debugging this. sudo lshw -C video $ sudo lshw -C video *-display description: VGA compatible controller product: RV710 [Mobility Radeon HD 4300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:48 memory:e0000000-efffffff ioport:de00(size=256) memory:f6df0000-f6dfffff memory:f6d00000-f6d1ffff After loading the propriety driver my new dmesg log is below (starting from the first major time gap): [2.983741] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [25.094327] ADDRCONF(NETDEV_UP): eth0: link is not ready [25.119737] udevd[520]: starting version 175 [25.167086] lp: driver loaded but no devices found [25.215341] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [25.215345] Disabling lock debugging due to kernel taint [25.231924] wmi: Mapper loaded [25.318414] lib80211: common routines for IEEE802.11 drivers [25.318418] lib80211_crypt: registered algorithm 'NULL' [25.331631] [fglrx] Maximum main memory to use for locked dma buffers: 3789 MBytes. [25.332095] [fglrx] vendor: 1002 device: 9552 count: 1 [25.334206] [fglrx] ioport: bar 1, base 0xde00, size: 0x100 [25.334229] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [25.334235] pci 0000:01:00.0: setting latency timer to 64 [25.337109] [fglrx] Kernel PAT support is enabled [25.337140] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [25.342803] Adding 4189180k swap on /dev/sda7. Priority:-1 extents:1 across:4189180k [25.364031] type=1400 audit(1338241723.027:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=606 comm="apparmor_parser" [25.364491] type=1400 audit(1338241723.031:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=606 comm="apparmor_parser" [25.364760] type=1400 audit(1338241723.031:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=606 comm="apparmor_parser" [25.394328] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [25.394343] wl 0000:0c:00.0: setting latency timer to 64 [25.415531] acpi device:36: registered as cooling_device2 [25.416688] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/LNXVIDEO:00/input/input6 [25.416795] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [25.416865] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [25.425133] lib80211_crypt: registered algorithm 'TKIP' [25.448058] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [25.448321] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [25.448353] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [25.738867] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38 [25.761213] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [25.761406] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [25.783432] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [25.908318] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [25.928155] input: Dell WMI hotkeys as /devices/virtual/input/input9 [25.960561] udevd[543]: renamed network interface eth1 to eth2 [26.285688] init: failsafe main process (835) killed by TERM signal [26.396426] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10 [26.423108] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11 [26.511297] Bluetooth: Core ver 2.16 [26.511383] NET: Registered protocol family 31 [26.511385] Bluetooth: HCI device and connection manager initialized [26.511388] Bluetooth: HCI socket layer initialized [26.511391] Bluetooth: L2CAP socket layer initialized [26.512079] Bluetooth: SCO socket layer initialized [26.530164] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [26.530168] Bluetooth: BNEP filters: protocol multicast [26.553893] type=1400 audit(1338241724.219:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=928 comm="apparmor_parser" [26.554860] Bluetooth: RFCOMM TTY layer initialized [26.554866] Bluetooth: RFCOMM socket layer initialized [26.554868] Bluetooth: RFCOMM ver 1.11 [26.557910] type=1400 audit(1338241724.223:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=927 comm="apparmor_parser" [26.559166] type=1400 audit(1338241724.223:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=928 comm="apparmor_parser" [26.559574] type=1400 audit(1338241724.223:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=928 comm="apparmor_parser" [26.575519] type=1400 audit(1338241724.239:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=931 comm="apparmor_parser" [26.581100] type=1400 audit(1338241724.247:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=931 comm="apparmor_parser" [26.582794] type=1400 audit(1338241724.247:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=929 comm="apparmor_parser" [26.605672] ppdev: user-space parallel port driver [27.592475] sky2 0000:09:00.0: eth0: enabling interface [27.604329] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.606962] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.852509] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [27.852513] vesafb: scrolling: redraw [27.852515] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [27.852523] mtrr: type mismatch for e0000000,400000 old: write-back new: write-combining [27.852527] mtrr: type mismatch for e0000000,200000 old: write-back new: write-combining [27.852531] mtrr: type mismatch for e0000000,100000 old: write-back new: write-combining [27.852534] mtrr: type mismatch for e0000000,80000 old: write-back new: write-combining [27.852538] mtrr: type mismatch for e0000000,40000 old: write-back new: write-combining [27.852541] mtrr: type mismatch for e0000000,20000 old: write-back new: write-combining [27.852544] mtrr: type mismatch for e0000000,10000 old: write-back new: write-combining [27.852548] mtrr: type mismatch for e0000000,8000 old: write-back new: write-combining [27.852551] mtrr: type mismatch for e0000000,4000 old: write-back new: write-combining [27.852554] mtrr: type mismatch for e0000000,2000 old: write-back new: write-combining [27.852558] mtrr: type mismatch for e0000000,1000 old: write-back new: write-combining [27.853154] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005580000, using 3072k, total 3072k [27.853405] Console: switching to colour frame buffer device 128x48 [27.853426] fb0: VESA VGA frame buffer device [28.539800] fglrx_pci 0000:01:00.0: irq 48 for MSI/MSI-X [28.540552] [fglrx] Firegl kernel thread PID: 1168 [28.540679] [fglrx] Firegl kernel thread PID: 1169 [28.540789] [fglrx] Firegl kernel thread PID: 1170 [28.540932] [fglrx] IRQ 48 Enabled [29.845620] [fglrx] Gart USWC size:1236 M. [29.845624] [fglrx] Gart cacheable size:489 M. [29.845629] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [29.845632] [fglrx] Reserved FB block: Unshared offset:fc21000, size:3df000 [29.845635] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [59.700023] eth2: no IPv6 routers present

  Read the article

• SQL SERVER – ASYNC_IO_COMPLETION – Wait Type – Day 11 of 28

  - by pinaldave

  For any good system three things are vital: CPU, Memory and IO (disk). Among these three, IO is the most crucial factor of SQL Server. Looking at real-world cases, I do not see IT people upgrading CPU and Memory frequently. However, the disk is often upgraded for either improving the space, speed or throughput. Today we will look at another IO-related wait type. From Book On-Line: Occurs when a task is waiting for I/Os to finish. ASYNC_IO_COMPLETION Explanation: Any tasks are waiting for I/O to finish. If by any means your application that’s connected to SQL Server is processing the data very slowly, this type of wait can occur. Several long-running database operations like BACKUP, CREATE DATABASE, ALTER DATABASE or other operations can also create this wait type. Reducing ASYNC_IO_COMPLETION wait: When it is an issue related to IO, one should check for the following things associated to IO subsystem: Look at the programming and see if there is any application code which processes the data slowly (like inefficient loop, etc.). Note that it should be re-written to avoid this  wait type. Proper placing of the files is very important. We should check the file system for proper placement of the files – LDF and MDF on separate drive, TempDB on another separate drive, hot spot tables on separate filegroup (and on separate disk), etc. Check the File Statistics and see if there is a higher IO Read and IO Write Stall SQL SERVER – Get File Statistics Using fn_virtualfilestats. Check event log and error log for any errors or warnings related to IO. If you are using SAN (Storage Area Network), check the throughput of the SAN system as well as configuration of the HBA Queue Depth. In one of my recent projects, the SAN was performing really badly and so the SAN administrator did not accept it. After some investigations, he agreed to change the HBA Queue Depth on the development setup (test environment). As soon as we changed the HBA Queue Depth to quite a higher value, there was a sudden big improvement in the performance. It is very likely to happen that there are no proper indexes on the system and yet there are lots of table scans and heap scans. Creating proper index can reduce the IO bandwidth considerably. If SQL Server can use appropriate cover index instead of clustered index, it can effectively reduce lots of CPU, Memory and IO (considering cover index has lesser columns than cluster table and all other; it depends upon the situation). You can refer to the following two articles I wrote that talk about how to optimize indexes: Create Missing Indexes Drop Unused Indexes Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussions of Wait Stats in this blog are generic and vary from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• Dual Screen will only mirror after 12.04 upgrade

  - by Ne0

  I have been using Ubuntu with a dual screen for years now, after upgrading to 12.04 LTS i cannot get my dual screen working properly Graphics: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] 01:00.1 Display controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] (Secondary) I noticed i was using open source drivers and attempted to install official binaries using the methods in this thread. Output: liam@liam-desktop:~$ sudo apt-get install fglrx fglrx-amdcccle Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: fglrx fglrx-amdcccle 2 upgraded, 0 newly installed, 0 to remove and 12 not upgraded. Need to get 45.1 MB of archives. After this operation, 739 kB of additional disk space will be used. Get:1 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx i386 2:8.960-0ubuntu1 [39.2 MB] Get:2 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx-amdcccle i386 2:8.960-0ubuntu1 [5,883 kB] Fetched 45.1 MB in 1min 33s (484 kB/s) (Reading database ... 328081 files and directories currently installed.) Preparing to replace fglrx 2:8.951-0ubuntu1 (using .../fglrx_2%3a8.960-0ubuntu1_i386.deb) ... Removing all DKMS Modules Error! There are no instances of module: fglrx 8.951 located in the DKMS tree. Done. Unpacking replacement fglrx ... Preparing to replace fglrx-amdcccle 2:8.951-0ubuntu1 (using .../fglrx-amdcccle_2%3a8.960-0ubuntu1_i386.deb) ... Unpacking replacement fglrx-amdcccle ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Setting up fglrx (2:8.960-0ubuntu1) ... update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-initramfs: deferring update (trigger activated) update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Loading new fglrx-8.960 DKMS files... Building only for 3.2.0-25-generic-pae Building for architecture i686 Building initial module for 3.2.0-25-generic-pae Done. fglrx: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-25-generic-pae/updates/dkms/ depmod....... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle (2:8.960-0ubuntu1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place liam@liam-desktop:~$ sudo aticonfig --initial -f aticonfig: No supported adapters detected When i attempt to get my settings back to what they were before upgrading i get this message requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) and GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._gnome_2drr_2derror_2dquark.Code3: requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) Any idea's on what i need to do to fix this issue?

  Read the article

• Building a project in VS that depends on a static and dynamic library

  - by fg nu

  Noob noobin'. I would appreciate some very careful handholding in setting up an example in Visual Studio 2010 Professional where I am trying to build a project which links: a previously built static library, for which the VS project folder is "C:\libjohnpaul\" a previously built dynamic library, for which the VS project folder is "C:\libgeorgeringo\" These are listed as Recipes 1.11, 1.12 and 1.13 in the C++ Cookbook. The project fails to compile for me with unresolved dependencies (see details below), and I can't figure out why. Project 1: Static Library The following are the header and source files that were compiled in this project. I was able to compile this project fine in VS2010, to the named standard library "libjohnpaul.lib" which lives in the folder ("C:/libjohnpaul/Release/"). // libjohnpaul/john.hpp #ifndef JOHN_HPP_INCLUDED #define JOHN_HPP_INCLUDED void john( ); // Prints "John, " #endif // JOHN_HPP_INCLUDED // libjohnpaul/john.cpp #include <iostream> #include "john.hpp" void john( ) { std::cout << "John, "; } // libjohnpaul/paul.hpp #ifndef PAUL_HPP_INCLUDED #define PAUL_HPP_INCLUDED void paul( ); // Prints " Paul, " #endif // PAUL_HPP_INCLUDED // libjohnpaul/paul.cpp #include <iostream> #include "paul.hpp" void paul( ) { std::cout << "Paul, "; } // libjohnpaul/johnpaul.hpp #ifndef JOHNPAUL_HPP_INCLUDED #define JOHNPAUL_HPP_INCLUDED void johnpaul( ); // Prints "John, Paul, " #endif // JOHNPAUL_HPP_INCLUDED // libjohnpaul/johnpaul.cpp #include "john.hpp" #include "paul.hpp" #include "johnpaul.hpp" void johnpaul( ) { john( ); paul( ); Project 2: Dynamic Library Here are the header and source files for the second project, which also compiled fine with VS2010, and the "libgeorgeringo.dll" file lives in the directory "C:\libgeorgeringo\Debug". // libgeorgeringo/george.hpp #ifndef GEORGE_HPP_INCLUDED #define GEORGE_HPP_INCLUDED void george( ); // Prints "George, " #endif // GEORGE_HPP_INCLUDED // libgeorgeringo/george.cpp #include <iostream> #include "george.hpp" void george( ) { std::cout << "George, "; } // libgeorgeringo/ringo.hpp #ifndef RINGO_HPP_INCLUDED #define RINGO_HPP_INCLUDED void ringo( ); // Prints "and Ringo\n" #endif // RINGO_HPP_INCLUDED // libgeorgeringo/ringo.cpp #include <iostream> #include "ringo.hpp" void ringo( ) { std::cout << "and Ringo\n"; } // libgeorgeringo/georgeringo.hpp #ifndef GEORGERINGO_HPP_INCLUDED #define GEORGERINGO_HPP_INCLUDED // define GEORGERINGO_DLL when building libgerogreringo.dll # if defined(_WIN32) && !defined(__GNUC__) # ifdef GEORGERINGO_DLL # define GEORGERINGO_DECL _ _declspec(dllexport) # else # define GEORGERINGO_DECL _ _declspec(dllimport) # endif # endif // WIN32 #ifndef GEORGERINGO_DECL # define GEORGERINGO_DECL #endif // Prints "George, and Ringo\n" #ifdef __MWERKS__ # pragma export on #endif GEORGERINGO_DECL void georgeringo( ); #ifdef __MWERKS__ # pragma export off #endif #endif // GEORGERINGO_HPP_INCLUDED // libgeorgeringo/ georgeringo.cpp #include "george.hpp" #include "ringo.hpp" #include "georgeringo.hpp" void georgeringo( ) { george( ); ringo( ); } Project 3: Executable that depends on the previous libraries Lastly, I try to link the aforecompiled static and dynamic libraries into one project called "helloBeatlesII" which has the project directory "C:\helloBeatlesII" (note that this directory does not nest the other project directories). The linking process that I did is described below: To the "helloBeatlesII" solution, I added the solutions "libjohnpaul" and "libgeorgeringo"; then I changed the properties of the "helloBeatlesII" project to additionally point to the include directories of the other two projects on which it depends ("C:\libgeorgeringo\libgeorgeringo" & "C:\libjohnpaul\libjohnpaul"); added "libgeorgeringo" and "libjohnpaul" to the project dependencies of the "helloBeatlesII" project and made sure that the "helloBeatlesII" project was built last. Trying to compile this project gives me the following unsuccessful build: 1------ Build started: Project: helloBeatlesII, Configuration: Debug Win32 ------ 1Build started 10/13/2012 5:48:32 PM. 1InitializeBuildStatus: 1 Touching "Debug\helloBeatlesII.unsuccessfulbuild". 1ClCompile: 1 helloBeatles.cpp 1ManifestResourceCompile: 1 All outputs are up-to-date. 1helloBeatles.obj : error LNK2019: unresolved external symbol "void __cdecl georgeringo(void)" (?georgeringo@@YAXXZ) referenced in function _main 1helloBeatles.obj : error LNK2019: unresolved external symbol "void __cdecl johnpaul(void)" (?johnpaul@@YAXXZ) referenced in function _main 1E:\programming\cpp\vs-projects\cpp-cookbook\helloBeatlesII\Debug\helloBeatlesII.exe : fatal error LNK1120: 2 unresolved externals 1 1Build FAILED. 1 1Time Elapsed 00:00:01.34 ========== Build: 0 succeeded, 1 failed, 2 up-to-date, 0 skipped ========== At this point I decided to call in the cavalry. I am new to VS2010, so in all likelihood I am missing something straightforward.

  Read the article

• Gnome Shell Theme Problem on Ubuntu 11.10

  - by Khurram Majeed

  I am trying to install ANewStart GNOME shell themes on Ubuntu 11.10. I have installed gnome shell extension for themes: sudo add-apt-repository ppa:webupd8team/gnome3 sudo apt-get update sudo apt-get install gnome-shell-extensions-user-theme I got the instructions from here ANewStart GNOME Shell Theme + AwOken Icons Theme = Pure Art. But when I go to "Advanced Settings - Shell Extensions" its empty... There is nothing. Also there is a orange triangle sign next to Shell Theme drop down in Advanced Settings - Theme. When I try to run the gnome-tweak-tool from terminal I get following error: imresh@imresh-laptop:~$ gnome-tweak-tool CRITICAL: Error parsing schema org.gnome.shell (/usr/share/glib-2.0/schemas/org.gnome.shell.gschema.xml) Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/gsettings.py", line 45, in __init__ summary = key.getElementsByTagName("summary")[0].childNodes[0].data IndexError: list index out of range WARNING : Error detecting shell Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell_extensions.py", line 145, in __init__ shell = GnomeShellFactory().get_shell() File "/usr/lib/python2.7/dist-packages/gtweak/utils.py", line 38, in getinstance instances[cls] = cls() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 123, in __init__ v = map(int,proxy.version.split(".")) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 46, in version return json.loads(self.execute_js('const Config = imports.misc.config; Config.PACKAGE_VERSION')) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 39, in execute_js result, output = self.proxy.Eval('(s)', js) File "/usr/lib/python2.7/dist-packages/gi/overrides/Gio.py", line 148, in __call__ kwargs.get('flags', 0), kwargs.get('timeout', -1), None) File "/usr/lib/python2.7/dist-packages/gi/types.py", line 43, in function return info.invoke(*args, **kwargs) GError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.Shell was not provided by any .service files WARNING : Shell not running Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell.py", line 57, in __init__ self._shell = GnomeShellFactory().get_shell() File "/usr/lib/python2.7/dist-packages/gtweak/utils.py", line 38, in getinstance instances[cls] = cls() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 123, in __init__ v = map(int,proxy.version.split(".")) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 46, in version return json.loads(self.execute_js('const Config = imports.misc.config; Config.PACKAGE_VERSION')) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 39, in execute_js result, output = self.proxy.Eval('(s)', js) File "/usr/lib/python2.7/dist-packages/gi/overrides/Gio.py", line 148, in __call__ kwargs.get('flags', 0), kwargs.get('timeout', -1), None) File "/usr/lib/python2.7/dist-packages/gi/types.py", line 43, in function return info.invoke(*args, **kwargs) GError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.Shell was not provided by any .service files WARNING : Could not list shell extensions Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell.py", line 62, in __init__ extensions = self._shell.list_extensions() AttributeError: ShellThemeTweak instance has no attribute '_shell' (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed Please help me in fixing this. I have also restarted the computer many times it does not make a difference.

  Read the article

• SQL SERVER – IO_COMPLETION – Wait Type – Day 10 of 28

  - by pinaldave

  For any good system three things are vital: CPU, Memory and IO (disk). Among these three, IO is the most crucial factor of SQL Server. Looking at real-world cases, I do not see IT people upgrading CPU and Memory frequently. However, the disk is often upgraded for either improving the space, speed or throughput. Today we will look at an IO-related wait types. From Book On-Line: Occurs while waiting for I/O operations to complete. This wait type generally represents non-data page I/Os. Data page I/O completion waits appear as PAGEIOLATCH_* waits. IO_COMPLETION Explanation: Any tasks are waiting for I/O to finish. This is a good indication that IO needs to be looked over here. Reducing IO_COMPLETION wait: When it is an issue concerning the IO, one should look at the following things related to IO subsystem: Proper placing of the files is very important. We should check the file system for proper placement of files – LDF and MDF on a separate drive, TempDB on another separate drive, hot spot tables on separate filegroup (and on separate disk),etc. Check the File Statistics and see if there is higher IO Read and IO Write Stall SQL SERVER – Get File Statistics Using fn_virtualfilestats. Check event log and error log for any errors or warnings related to IO. If you are using SAN (Storage Area Network), check the throughput of the SAN system as well as the configuration of the HBA Queue Depth. In one of my recent projects, the SAN was performing really badly so the SAN administrator did not accept it. After some investigations, he agreed to change the HBA Queue Depth on development (test environment) set up and as soon as we changed the HBA Queue Depth to quite a higher value, there was a sudden big improvement in the performance. It is very possible that there are no proper indexes in the system and there are lots of table scans and heap scans. Creating proper index can reduce the IO bandwidth considerably. If SQL Server can use appropriate cover index instead of clustered index, it can effectively reduce lots of CPU, Memory and IO (considering cover index has lesser columns than cluster table and all other; it depends upon the situation). You can refer to the two articles that I wrote; they are about how to optimize indexes: Create Missing Indexes Drop Unused Indexes Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussions of Wait Stats in this blog are generic and vary from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Types, SQL White Papers, T SQL, Technology

  Read the article

• Customize Entity Framework SSDL &amp; SQL Generation

  - by Dane Morgridge

  In almost every talk I have done on Entity Framework I get questions on how to do custom SSDL or SQL when using model first development.  Quite a few of these questions have required custom changes to the SSDL, which of course can be a problem if it is getting auto generated.  Luckily, there is a tool that can help.  In the Visual Studio Gallery on MSDN, there is the Entity Designer Database Generation Power Pack. You have the ability to select different generation strategies and it also allows you to inject custom T4 Templates into the generation workflow so that you can customize the SSDL and SQL generation.  When you select to generate a database from a model the dialog is replaced by one with more options:   You can clone the individual workflow for either the current project or current machine.  The templates are installed at “C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\Extensions\Microsoft\Entity Framework Tools\DBGen” on my local machine and you can make a copy of any template there.  If you clone the strategy and open it up, you will get the following workflow: Each item in the sequence is defining the execution of a T4 template.  The XAML for the workflow is listed below so you can see where the T4 files are defined.  You can simply make a copy of an existing template and make what ever changes you need.   1: <Activity x:Class="GenerateDatabaseScriptWorkflow" ... > 2: <x:Members> 3: <x:Property Name="Csdl" Type="InArgument(sde:EdmItemCollection)" /> 4: <x:Property Name="ExistingSsdl" Type="InArgument(s:String)" /> 5: <x:Property Name="ExistingMsl" Type="InArgument(s:String)" /> 6: <x:Property Name="Ssdl" Type="OutArgument(s:String)" /> 7: <x:Property Name="Msl" Type="OutArgument(s:String)" /> 8: <x:Property Name="Ddl" Type="OutArgument(s:String)" /> 9: <x:Property Name="SmoSsdl" Type="OutArgument(ss:SsdlServer)" /> 10: </x:Members> 11: <Sequence> 12: <dbtk:ProgressBarStartActivity /> 13: <dbtk:CsdlToSsdlTemplateActivity SsdlOutput="[Ssdl]" TemplatePath="$(VSEFTools)\DBGen\CSDLToSSDL_TPT.tt" /> 14: <dbtk:CsdlToMslTemplateActivity MslOutput="[Msl]" TemplatePath="$(VSEFTools)\DBGen\CSDLToMSL_TPT.tt" /> 15: <ded:SsdlToDdlActivity ExistingSsdlInput="[ExistingSsdl]" SsdlInput="[Ssdl]" DdlOutput="[Ddl]" /> 16: <dbtk:GenerateAlterSqlActivity DdlInputOutput="[Ddl]" DeployToScript="True" DeployToDatabase="False" /> 17: <dbtk:ProgressBarEndActivity ClosePopup="true" /> 18: </Sequence> 19: </Activity>   So as you can see, this tool enables you to make some pretty heavy customizations to how the SSDL and SQL get generated.  You can get more info and the tool can be downloaded from: http://visualstudiogallery.msdn.microsoft.com/en-us/df3541c3-d833-4b65-b942-989e7ec74c87.  There is a comments section on the site so make sure you let the team know what you like and what you don’t like.  Enjoy!

  Read the article

• Experience the iPad UI On Your PC

  - by Matthew Guay

  Want to test drive iPad without heading over to an Apple store?  Here’s a way you can experience some of the iPad UI straight from your browser! The iPad is the latest gadget from Apple to wow the tech world, and people even waited in line all night to be one of the first to get their hands on one.  Thanks to a simple JavaScript trick, however, you can get a feel for some of its new features without leaving your computer.  This won’t let you try out everything on the iPad, but it will let you see how the new lists and pop-over menus work just like they do in the new apps. Test drive the iPad’s UI from your browser Normally, the Apple iPhone developer library online looks like a standard webpage. But, on the iPad, it looks and feels like a full-blown native iPad app.  With a nifty JavaScript trick from boredzo.org you can use this same interface on your PC.  Since the iPad uses the Safari browser, we ran this test in Safari for Windows.  If you don’t already have it installed, you can download it from Apple (link below) and setup as normal. Now, open Safari and browse to Apple’s developer page at: http://www.developer.apple.com   Now, enter the following in the address bar, and press Enter. javascript:localStorage.setItem('debugSawtooth', 'true')   Finally, click this link to go to the iPhone OS documentation. http://developer.apple.com/iphone/library/iPad/ After a short delay, it should open in full iPad style! The left menu works just like the menus on the iPad, complete with transitions.  It feels entirely like a native application, instead of a webpage.  To scroll through text, click and pull up or down similar to the way you would use it on a touch screen. Some pages even include a pop-over menu like many of the new iPad apps use. Note that the page will be rendered for the size of your browser, and if you resize your window the page will not resize with it.  Simply press F5 to reload the page, and it will resize to fit the new window size.  If you resize your window to be tall and narrow, like the iPad in horizontal mode, the webpage will change and the left menu will disappear in lieu of a drop-down menu just like it would if you rotated the iPad. This works in Chrome as well, since it, like Safari, is based on Webkit.  However, it didn’t seem to work in our test on Firefox or other browsers. We’ve previously covered how you can experience some of the iPhone’s UI with the online iPhone user guide.  Check it out if you haven’t yet: View Mobile Websites in Windows with Safari 4 Developer Tools Conclusion Although this doesn’t let you really try out all of the iPad’s interface, it at least gives you a taste of how it works.  It’s exciting to see how much functionality can be packed into webapps today.  And don’t forget, How-to Geek is giving away an iPad to a random fan!  Head over to our Facebook page and fan How-to Geek if you haven’t already done so. Win an iPad on the How-To Geek Facebook Fan Page Similar Articles Productive Geek Tips Want an iPad? How-To Geek is Giving One Away!Why Wait? Amazing New Add-on Turns Your iPhone into an iPad! [Comic]The Complete List of iPad Tips, Tricks, and TutorialsShare Your Windows Vista Experience Index ScoreAnother Blog You Should Subscribe To TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images Get Wildlife Photography Tips at BBC’s PhotoMasterClasses

  Read the article

• jtreg update, March 2012

  - by jjg

  There is a new update for jtreg 4.1, b04, available. The primary changes have been to support faster and more reliable test runs, especially for tests in the jdk/ repository. [ For users inside Oracle, there is preliminary direct support for gathering code coverage data using jcov while running tests, and for generating a coverage report when all the tests have been run. ] -- jtreg can be downloaded from the OpenJDK jtreg page: http://openjdk.java.net/jtreg/. Scratch directories On platforms like Windows, if a test leaves a file open when the test is over, that can cause a problem for downstream tests, because the scratch directory cannot be emptied beforehand. This is addressed in agentvm mode by discarding any agents using that scratch directory and starting new agents using a new empty scratch directory. Successive directives use suffices _1, _2, etc. If you see such directories appearing in the work directory, that is an indication that files were left open in the preceding directory in the series. Locking support Some tests use shared system resources such as fixed port numbers. This causes a problem when running tests concurrently. So, you can now mark a directory such that all the tests within all such directories will be run sequentially, even if you use -concurrency:N on the command line to run the rest of the tests in parallel. This is seen as a short term solution: it is recommended that tests not use shared system resources whenever possible. If you are running multiple instances of jtreg on the same machine at the same time, you can use a new option -lock:file to specify a file to be used for file locking; otherwise, the locking will just be within the JVM used to run jtreg. "autovm mode" By default, if no options to the contrary are given on the command line, tests will be run in othervm mode. Now, a test suite can be marked so that the default execution mode is "agentvm" mode. In conjunction with this, you can now mark a directory such that all the tests within that directory will be run in "othervm" mode. Conceptually, this is equivalent to putting /othervm on every appropriate action on every test in that directory and any subdirectories. This is seen as a short term solution: it is recommended tests be adapted to use agentvm mode, or use "@run main/othervm" explicitly. Info in test result files The user name and jtreg version info are now stored in the properties near the beginning of the .jtr file. Build The makefiles used to build and test jtreg have been reorganized and simplified. jtreg is now using JT Harness version 4.4. Other jtreg provides access to GNOME_DESKTOP_SESSION_ID when set. jtreg ensures that shell tests are given an absolute path for the JDK under test. jtreg now honors the "first sentence rule" for the description given by @summary. jtreg saves the default locale before executing a test in samevm or agentvm mode, and restores it afterwards. Bug fixes jtreg tried to execute a test even if the compilation failed in agentvm mode because of a JVM crash. jtreg did not correctly handle the -compilejdk option. Acknowledgements Thanks to Alan, Amy, Andrey, Brad, Christine, Dima, Max, Mike, Sherman, Steve and others for their help, suggestions, bug reports and for testing this latest version.

  Read the article

• InfiniBand Enabled Diskless PXE Boot

  - by Neeraj Gupta

  When you want to bring up a compute server in your environment and need InfiniBand connectivity, usually you go through various installation steps. This could involve operating systems like Linux, followed by a compatible InfiniBand software distribution, associated dependencies and configurations. What if you just want to run some InfiniBand diagnostics or troubleshooting tools from a test machine ? What if something happened to your primary machine and while recovering in rescue mode, you also need access to your InfiniBand network ? Often times we use opensource community supported small Linux distributions but they don't come with required InfiniBand support and tools. In this weblog, I am going to provide instructions on how to add InfniBand support to a specific Linux image - Parted Magic.This is a free to use opensource Linux distro often used to recover or rescue machines. The distribution itself will not be changed at all. Yes, you heard it right ! I have built an InfiniBand Add-on package that will be passed to the default kernel and initrd to get this all working. Pr-requisites You will need to have have a PXE server ready on your ethernet based network. The compute server you are trying to PXE boot should have a compatible IB HCA and must be connected to an active IB network. Required Downloads Download the Parted Magic small distribution for PXE from Parted Magic website. Download InfiniBand PXE Add On package. Right Click and Download from here. Do not extract contents of this file. You need to use it as is. Prepare PXE Server Extract the contents of downloaded pmagic distribution into a temporary directory. Inside the directory structure, you will see pmagic directory containing two files - bzImage and initrd.img. Copy this directory in your TFTP server's root directory. This is usually /tftpboot unless you have a different setup. For Example: cp pmagic_pxe_2012_2_27_x86_64.zip /tmp cd /tmp unzip pmagic_pxe_2012_2_27_x86_64.zip cd pmagic_pxe_2012_2_27_x86_64 # ls -l total 12 drwxr-xr-x  3 root root 4096 Feb 27 15:48 boot drwxr-xr-x  2 root root 4096 Mar 17 22:19 pmagic cp -r pmagic /tftpboot As I mentioned earlier, we dont change anything to the default pmagic distro. Simply provide the add-on package via PXE append options. If you are using a menu based PXE server, then add an entry to your menu. For example /tftpboot/pxelinux.cfg/default can be appended with following section. LABEL Diskless Boot With InfiniBand Support MENU LABEL Diskless Boot With InfiniBand Support KERNEL pmagic/bzImage APPEND initrd=pmagic/initrd.img,pmagic/ib-pxe-addon.cgz edd=off load_ramdisk=1 prompt_ramdisk=0 rw vga=normal loglevel=9 max_loop=256 TEXT HELP * A Linux Image which can be used to PXE Boot w/ IB tools ENDTEXT Note: Keep the line starting with "APPEND" as a single line. If you use host specific files in pxelinux.cfg, then you can use that specific file to add the above mentioned entry. Boot Computer over PXE Now boot your desired compute machine over PXE. This does not have to be over InfiniBand. Just use your standard ethernet interface and network. If using menus, then pick the new entry that you created in previous section. Enable IPoIB After a few minutes, you will be booted into Parted Magic environment. Open a terminal session and see if InfiniBand is enabled. You can use commands like: ifconfig -a ibstat ibv_devices ibv_devinfo If you are connected to InfiniBand network with an active Subnet Manager, then your IB interfaces must have come online by now. You can proceed and assign IP address to them. This will enable you at IPoIB layer. Example InfiniBand Diagnostic Tools I have added several InfiniBand Diagnistic tools in this add-on. You can use from following list: ibstat, ibstatus, ibv_devinfo, ibv_devices perfquery, smpquery ibnetdiscover, iblinkinfo.pl ibhosts, ibswitches, ibnodes Wrap Up This concludes this weblog. Here we saw how to bring up a computer with IPoIB and InfiniBand diagnostic tools without installing anything on it. Its almost like running diskless !

  Read the article

< Previous Page | 737 738 739 740 741 742 743 744 745 746 747 748  | Next Page >