Search Results

Search found 19134 results on 766 pages for 'support contract'.

Page 741/766 | < Previous Page | 737 738 739 740 741 742 743 744 745 746 747 748  | Next Page >

  • Looking Back at MIX10

    - by WeigeltRo
    It’s the sad truth of my life that even though I’m fascinated by airplanes and flight in general since my childhood days, my body doesn’t like flying. Even the ridiculously short flights inside Germany are taking their toll on me each time. Now combine this with sitting in the cramped space of economy class for many hours on a transatlantic flight from Germany to Las Vegas and back, and factor in some heavy dose of jet lag (especially on my way eastwards), and you get an idea why after coming back home I had this question on my mind: Was it really worth it to attend MIX10? This of course is a question that will also be asked by my boss at Comma Soft (for other reasons, obviously), who decided to send me and my colleague Jens Schaller, to the MIX10 conference. (A note to my German readers: An dieser Stelle der Hinweis, dass Comma Soft noch Silverlight-Entwickler und/oder UI-Designer für den Standort Bonn sucht – aussagekräftige Bewerbungen bitte an [email protected]) Too keep things short: My answer is yes. Before I’ll go into detail, let me ask the heretical questions whether tech conferences in general still make sense. There was a time, where actually being at a tech conference gave you a head-start in regard to learning about new technologies. Nowadays this is no longer true, where every bit of information and every detail is immediately twittered, blogged and whatevered to death. In the case of MIX10 you even can download the video-taped sessions shortly after. So: Does visiting a conference still make sense? It depends on what you expect from a conference. It should be clear to everybody that you’ll neither get exclusive information, nor receive training in a small group. What a conference does offer that sitting in front of your computer does not can be summarized as follows: Focus Being away from work and home will help you to focus on the presented information. Of course there are always the poor guys who are haunted by their work (with mails and short text messages reporting the latest showstopper problem), but in general being out of your office makes a huge difference. Inspiration With the focus comes the emotional involvement. I find it much easier to absorb information if I feel that certain vibe when sitting in a session. This still means that I have put work into reviewing the information later, but it’s a better starting point. And all the impressions collected at a (good) conference combined lead to a higher motivation – be it by the buzz (“this is gonna be sooo cool!”) or by the fear to fall behind (“man, we’ll have work on this, or else…”). People At a conference it’s pretty easy to get into contact with other people during breakfast, lunch and other breaks. This is a good opportunity to get a feel for what other development teams are doing (on a very general level of course, nobody will tell you about their secret formula) and what they are thinking about specific technologies. So MIX10 did offer focus, inspiration and people, but that would have meant nothing without valuable content. When I (being a frontend developer with a strong interest in UI/UX) planned my visit to MIX10, I made the decision to focus on the "soft" topics of design, interaction and user experience. I figured that I would be bombarded with all the technical details about Silverlight 4 anyway in the weeks and months to come. Actually, I would have liked to catch a few technical sessions, but the agenda wasn’t exactly in favor of people interested in any kind of Silverlight and UI/UX/Design topics. That’s one of my few complaints about the conference – I would have liked one more day and/or more sessions per day. Overall, the quality of the workshops and sessions was pretty high. In fact, looking back at my collection of conferences I’ve visited in the past I’d say that MIX10 ranks somewhere near the top spot. Here’s an overview of the workshops/sessions I attended (I’ll leave out the keynotes): Day 0 (Workshops on Sunday) Design Fundamentals for Developers Robby Ingebretsen is the man! Great workshop in three parts with the perfect mix of examples, well-structured definition of terminology and the right dose of humor. Robby was part of the WPF team before founding his own company so he not only has a strong interest in design (and the skillz!) but also the technical background.   Design Tools and Techniques Originally announced to be held by Arturo Toledo, the Rosso brothers from ArcheType filled in for the first two parts, and Corrina Black had a pretty general part about the Windows Phone UI. The first two thirds were a mixed bag; the two guys definitely knew what they were talking about, and the demos were great, but the talk lacked the preparation and polish of a truly great presentation. Corrina was not allowed to go into too much detail before the keynote on Monday, but the session was still very interesting as it showed how much thought went into the Windows Phone UI (and there’s always a lot to learn when people talk about their thought process). Day 1 (Monday) Designing Rich Experiences for Data-Centric Applications I wonder whether there was ever a test-run for this session, but what Ken Azuma and Yoshihiro Saito delivered in the first 15 minutes of a 30-minutes-session made me walk out. A commercial for a product (just great: a video showing a SharePoint plug-in in an all-Japanese UI) combined with the most generic blah blah one could imagine. EPIC FAIL.   Great User Experiences: Seamlessly Blending Technology & Design I switched to this session from the one above but I guess I missed the interesting part – what I did catch was what looked like a “look at the cool stuff we did” without being helpful. Or maybe I was just in a bad mood after the other session.   The Art, Technology and Science of Reading This talk by Kevin Larson was very interesting, but was more a presentation of what Microsoft is doing in research (pretty impressive) and in the end lacked a bit the helpful advice one could have hoped for.   10 Ways to Attack a Design Problem and Come Out Winning Robby Ingebretsen again, and again a great mix of theory and practice. The clean and simple, yet effective, UI of the reader app resulted in a simultaneous “wow” of Jens and me. If you’d watch only one session video, this should be it. Microsoft has to bring Robby back next year! Day 2 (Tuesday) Touch in Public: Multi-touch Interaction Design for Kiosks & Architectural Experiences Very interesting session by Jason Brush, a great inspiration with many details to look out for in the examples. Exactly what I was hoping for – and then some!   Designing Bing: Heart and Science How hard can it be to design the UI for a search engine? An input field and a list of results, that should be it, right? Well, not so fast! The talk by Paul Ray showed the many iterations to finally get it right (up to the choice of a specific blue for the links). And yes, I want an eye-tracking device to play around with!   The Elephant in the Room When Nishant Kothary presented a long list of what his session was not about, I told to myself (not having the description text present) “Am I in the wrong talk? Should I leave?”. Boy, was I wrong. A great talk about human factors in the process of designing stuff.   An Hour with Bill Buxton Having seen Bill Buxton’s presentation in the keynote, I just had to see this man again – even though I didn’t know what to expect. Being more or less unplanned and intended to be more of a conversation, the session didn’t provide a wealth of immediately useful information. Nevertheless Bill Buxton was impressive with his huge knowledge of seemingly everything. But this could/should have been a session some when in the evening and not in parallel to at least two other interesting talks. Day 3 (Wednesday) Design the Ordinary, Like the Fixie This session by DL Byron and Kevin Tamura started really well and brought across the message to keep things simple. But towards the end the talk lost some of its steam. And, as a member of the audience pointed out, they kind of ignored their own advice when they used a fancy presentation software other then PowerPoint that sometimes got in the way of showing things.   Developing Natural User Interfaces Speaking of alternative presentation software, Joshua Blake definitely had the most remarkable alternative to PowerPoint, a self-written program called NaturalShow that was controlled using multi-touch on a touch screen. Not a PowerPoint-killer, but impressive nevertheless. The (excellent) talk itself was kind of eye-opening in regard to what “multi-touch support” on various platforms (WPF, Silverlight, Windows Phone) actually means.   Treat your Content Right The talk by Tiffani Jones Brown wasn’t even on my planned schedule, but somehow I ended up in that session – and it was great. And even for people who don’t necessarily have to write content for websites, some points made by Tiffani are valid in many places, notably wherever you put texts with more than a single word into your UI. Creating Effective Info Viz in Microsoft Silverlight The last session of MIX10 I attended was kind of disappointing. At first things were very promising, with Matthias Shapiro giving a brief but well-structured introduction to info graphics and interactive visualizations. Then the live-coding began and while the result was interesting, too much time was spend on wrestling to get the code working. Ending earlier than planned, the talk was a bit light on actual content, but at least it included a nice list of resources. Conclusion It could be felt all across MIX10, UIs will take a huge leap forward; in fact, there are enough examples that have already. People who both have the technical know-how and at least a basic understanding of design (“literacy” as Bill Buxton called it) are in high demand. The concept of the MIX conference and initiatives like design.toolbox shows that Microsoft understands very well that frontend developers have to acquire new knowledge besides knowing how to hack code and putting buttons on a form. There are extremely exciting times before us, with lots of opportunity for those who are eager to develop their skills, that is for sure.

    Read the article

  • Special thanks to everyone that helped me in 2010.

    - by mbcrump
    2010 has been a very good year for me and I wanted to create a list and thank everyone for what they have done for me.  I also wanted to thank everyone for reading and subscribing to my blog. It is hard to believe that people actually want to read what I write. I feel like I owe a huge thanks to everyone listed below. Looking back upon 2010, I feel that I’ve grown as a developer and you are part of that reason. Sometimes we get caught up in day to day work and forget to give thanks to those that helped us along the way. The list below is mine, it includes people and companies. This list is obviously not going to include everyone that has helped, just those that have stood out in my mind. When I think back upon 2010, their names keep popping up in my head. So here goes, in no particular order.  People Dave Campbell – For everything he has done for the Silverlight Community with his Silverlight Cream blog. I can’t think of a better person to get recognition at the Silverlight FireStarter event. I also wanted to thank him for spending several hours of his time helping me track down a bug in my feedburner account. Victor Gaudioso – For his large collection of video tutorials on his blog and the passion and enthusiasm he has for Silverlight. We have talked on the phone and I’ve never met anyone so fired up for Silverlight. Kunal Chowdhury – Kunal has always been available for me to bounce ideas off of. Kunal has also answered a lot of questions that stumped me. His blog and CodeProject article have green a great help to me and the Silverlight Community. Glen Gordon – I was looking frantically for a Windows Phone 7 several months before release and Glen found one for me. This allowed me to start a blog series on the Windows Phone 7 hardware and developing an application from start to finish that Scott Guthrie retweeted.  Jeff Blankenburg – For listening to my complaints in the early stages of Windows Phone 7. Jeff was always very polite and gave me his cell phone number to talk it over. He also walked me through several problems that I was having early on. Pete Brown – For writing Silverlight 4 in Action. This book is definitely a labor of love. I followed Pete on Twitter as he was writing it and he spent a lot of late nights and weekends working on it. I felt a lot smarter after reading it the first time. The second time was even better. John Papa – For all of his work on the Silverlight Firestarter and the Silverlight community in general. He has also helped me on a personal level with several things. Daniel Heisler – For putting up with me the past year while we worked on many .NET projects together in 2010. Alvin Ashcraft – For publishing a daily blog post on the best of .NET links. He has linked to my site many times and I really appreciate what he does for the community. Chris Alcock – For publishing the Morning Brew every weekday. I remember when I first appeared on his site, I started getting hundreds of hits on my site and wondered if I was getting a DOS attack or something. It was great to find out that Chris had linked to one of my articles. Joel Cochran – For spending a week teaching “Blend-O-Rama”. This was my one of my favorite sessions of this year. I learned a lot about Expression Blend from it and the best part was that it was free and during lunchtime. Jeremy Likness – Jeremy is smart – very smart. I have learned a lot from Jeremy over the past year. He is also involved in the Silverlight community in every way possible, from forums to blog post to screencast to open source. It goes on and on. The people that I met at VSLive Orlando 2010. I had a great time chatting with Walt Ritscher, Wallace McClure, Tim Huckabee and David Platt. Also a special thanks to all of my friends on Twitter like @wilhil, @DBVaughan, @DataArtist, @wbm, @DirkStrauss and @rsringeri and many many more. Software Companies / Events / May of gave me FREE stuff. =) Microsoft (3) – I was sent a free coupon code by Microsoft to take the Silverlight 4 Beta Exam. I jumped on the offer and took the exam. It was great being selected to try out the exam before it goes public even though Microsoft eventually published a universal coupon code for everyone. I am still waiting to find out if I passed the exam. My fingers are crossed. Microsoft reaching out to me with some questions regarding the .NET Community. I’ve never had a company contact me with such interest in the community. Having a contest where 75 people could win a $100 gift certificate and a T-Shirt for submitting a Windows Phone 7 app. I submitted my app and won. All of the free launch events this year (Windows Phone 7, Visual Studio 2010, ASP.NET MVC). Wintellect – For providing an awesome day of free technical training called T.E.N. Where else can you get free training from some of the best programmers in the world? I also won a contest from them that included a NETAdvantage Ultimate License from Infragistics. VSLive – I attended the Orlando 2010 Conference and it was the best developer’s conference that I have ever attended. I got to know a lot of people at this conference and hang out with many wonderful speakers. I live tweeted the event and while it may have annoyed some, the organizers of VSLive loved it. I won the contest on Twitter and they invited me back to the 2011 session of my choice. This is a very nice gift and I really appreciate the generosity. BarcodeLib.com – For providing free barcode generating tools for a Non-Profit ASP.NET project that I was working on. Their third party controls really made this a breeze compared to my existing solution. NDepend – It is absolutely the best tool to improve code quality. The product is extremely large and I would recommend heading over to their site to check it out. Silverlight Spy – I was writing a blog post on Silverlight Spy and Koen Zwikstra provided a FREE license to me. If you ever wanted to peek inside of a Silverlight Application then this is the tool for you. He is also working on a version that will support OOB and Windows Phone 7. I would recommend checking out his site. Birmingham .NET Users Group / Silverlight Nights User Group – It takes a lot of time to put together a user group meeting every month yet it always seems to happen. I don’t want to name names for fear of leaving someone out but both of these User Groups are excellent if you live in the Birmingham, Alabama area. Publishing Companies Manning Publishing – For giving me early access to Silverlight 4 in Action by Pete Brown. It was really nice to be able to read this awesome book while Pete was writing it. I was also one of the first people to publish a review of the book. Sams Publishing and DZone – For providing a copy of Silverlight 4 Unleashed by Laurent Bugnion for me to review for their site. The review is coming in January 2011. Special Shoutout to the following 3rd Party Silverlight Controls It has been a great pleasure to work with the following companies on 3rd Party Control Giveaways every month. It always amazes me how every 3rd Party Control company is so eager to help out the community. I’ve never been turned down by any of these companies! These giveaways have sparked a lot of interest in Silverlight and hopefully I can continue giving away a new set every month. If you are a 3rd Party Control company and are interested in participating in these giveaways then please email me at mbcrump29[at]gmail[d0t].com. The companies below have already participated in my giveaways: Infragistics (December 2010) - Win a set of Infragistics Silverlight Controls with Data Visualization!  Mindscape (November 2010) - Mindscape Silverlight Controls + Free Mega Pack Contest Telerik (October 2010) - Win Telerik RadControls for Silverlight! ($799 Value) Again, I just wanted to say Thanks to everyone for helping me grow as a developer.  Subscribe to my feed

    Read the article

  • techniques for an AI for a highly cramped turn-based tactics game

    - by Adam M.
    I'm trying to write an AI for a tactics game in the vein of Final Fantasy Tactics or Vandal Hearts. I can't change the game rules in any way, only upgrade the AI. I have experience programming AI for classic board games (basically minimax and its variants), but I think the branching factor is too great for the approach to be reasonable here. I'll describe the game and some current AI flaws that I'd like to fix. I'd like to hear ideas for applicable techniques. I'm a decent enough programmer, so I only need the ideas, not an implementation (though that's always appreciated). I'd rather not expend effort chasing (too many) dead ends, so although speculation and brainstorming are good and probably helpful, I'd prefer to hear from somebody with actual experience solving this kind of problem. For those who know it, the game is the land battle mini-game in Sid Meier's Pirates! (2004) and you can skim/skip the next two paragraphs. For those who don't, here's briefly how it works. The battle is turn-based and takes place on a 16x16 grid. There are three terrain types: clear (no hindrance), forest (hinders movement, ranged attacks, and sight), and rock (impassible, but does not hinder attacks or sight). The map is randomly generated with roughly equal amounts of each type of terrain. Because there are many rock and forest tiles, movement is typically very cramped. This is tactically important. The terrain is not flat; higher terrain gives minor bonuses. The terrain is known to both sides. The player is always the attacker and the AI is always the defender, so it's perfectly valid for the AI to set up a defensive position and just wait. The player wins by killing all defenders or by getting a unit to the city gates (a tile on the other side of the map). There are very few units on each side, usually 4-8. Because of this, it's crucial not to take damage without gaining some advantage from it. Units can take multiple actions per turn. All units on one side move before any units on the other side. Order of execution is important, and interleaving of actions between units is often useful. Units have melee and ranged attacks. Melee attacks vary widely in strength; ranged attacks have the same strength but vary in range. The main challenges I face are these: Lots of useful move combinations start with a "useless" move that gains no immediate advantage, or even loses advantage, in order to set up a powerful flank attack in the future. And, since the player units are stronger and have longer range, the AI pretty much always has to take some losses before they can start to gain kills. The AI must be able to look ahead to distinguish between sacrificial actions that provide a future benefit and those that don't. Because the terrain is so cramped, most of the tactics come down to achieving good positioning with multiple units that work together to defend an area. For instance, two defenders can often dominate a narrow pass by positioning themselves so an enemy unit attempting to pass must expose itself to a flank attack. But one defender in the same pass would be useless, and three units can defend a slightly larger pass. Etc. The AI should be able to figure out where the player must go to reach the city gates and how to best position its few units to cover the approaches, shifting, splitting, or combining them appropriately as the player moves. Because flank attacks are extremely deadly (and engineering flank attacks is key to the player strategy), the AI should be competent at moving its units so that they cover each other's flanks unless the sacrifice of a unit would give a substantial benefit. They should also be able to force flank attacks on players, for instance by threatening a unit from two different directions such that responding to one threat exposes the flank to the other. The AI should attack if possible, but sometimes there are no good ways to approach the player's position. In that case, the AI should be able to recognize this and set up a defensive position of its own. But the AI shouldn't be vulnerable to a trivial exploit where the player repeatedly opens and closes a hole in his defense and shoots at the AI as it approaches and retreats. That is, the AI should ideally be able to recognize that the player is capable of establishing a solid defense of an area, even if the defense is not currently in place. (I suppose if a good unit allocation algorithm existed, as needed for the second bullet point, the AI could run it on the player units to see where they could defend.) Because it's important to choose a good order of action and interleave actions between units, it's not as simple as just finding the best move for each unit in turn. All of these can be accomplished with a minimax search in theory, but the search space is too large, so specialized techniques are needed. I thought about techniques such as influence mapping, but I don't see how to use the technique to great effect. I thought about assigning goals to the units. This can help them work together in some limited way, and the problem of "how do I accomplish this goal?" is easier to solve than "how do I win this battle?", but assigning good goals is a hard problem in itself, because it requires knowing whether the goal is achievable and whether it's a good use of resources. So, does anyone have specific ideas for techniques that can help cleverize this AI? Update: I found a related question on Stackoverflow: http://stackoverflow.com/questions/3133273/ai-for-a-final-fantasy-tactics-like-game The selected answer gives a decent approach to choosing between alternative actions, but it doesn't seem to have much ability to look into the future and discern beneficial sacrifices from wasteful ones. It also focuses on a single unit at a time and it's not clear how it could be extended to support cooperation between units in defending or attacking.

    Read the article

  • Routing to a Controller with no View in Angular

    - by Rick Strahl
    I've finally had some time to put Angular to use this week in a small project I'm working on for fun. Angular's routing is great and makes it real easy to map URL routes to controllers and model data into views. But what if you don't actually need a view, if you effectively need a headless controller that just runs code, but doesn't render a view?Preserve the ViewWhen Angular navigates a route and and presents a new view, it loads the controller and then renders the view from scratch. Views are not cached or stored, but displayed and then removed. So if you have routes configured like this:'use strict'; // Declare app level module which depends on filters, and services window.myApp = angular.module('myApp', ['myApp.filters', 'myApp.services', 'myApp.directives', 'myApp.controllers']). config(['$routeProvider', function($routeProvider) { $routeProvider.when('/map', { template: "partials/map.html ", controller: 'mapController', reloadOnSearch: false, animation: 'slide' }); … $routeProvider.otherwise({redirectTo: '/map'}); }]); Angular routes to the mapController and then re-renders the map.html template with the new data from the $scope filled in.But, but… I don't want a new View!Now in most cases this works just fine. If I'm rendering plain DOM content, or textboxes in a form interface that is all fine and dandy - it's perfectly fine to completely re-render the UI.But in some cases, the UI that's being managed has state and shouldn't be redrawn. In this case the main page in question has a Google Map on it. The map is  going to be manipulated throughout the lifetime of the application and the rest of the pages. In my application I have a toolbar on the bottom and the rest of the content is replaced/switched out by the Angular Views:The problem is that the map shouldn't be redrawn each time the Location view is activated. It should maintain its state, such as the current position selected (which can move), and shouldn't redraw due to the overhead of re-rendering the initial map.Originally I set up the map, exactly like all my other views - as a partial, that is rendered with a separate file, but that didn't work.The Workaround - Controller Only RoutesThe workaround for this goes decidedly against Angular's way of doing things:Setting up a Template-less RouteIn-lining the map view directly into the main pageHiding and showing the map view manuallyLet's see how this works.Controller Only RouteThe template-less route is basically a route that doesn't have any template to render. This is not directly supported by Angular, but thankfully easy to fake. The end goal here is that I want to simply have the Controller fire and then have the controller manage the display of the already active view by hiding and showing the map and any other view content, in effect bypassing Angular's view display management.In short - I want a controller action, but no view rendering.The controller-only or template-less route looks like this: $routeProvider.when('/map', { template: " ", // just fire controller controller: 'mapController', animation: 'slide' });Notice I'm using the template property rather than templateUrl (used in the first example above), which allows specifying a string template, and leaving it blank. The template property basically allows you to provide a templated string using Angular's HandleBar like binding syntax which can be useful at times. You can use plain strings or strings with template code in the template, or as I'm doing here a blank string to essentially fake 'just clear the view'. In-lined ViewSo if there's no view where does the HTML go? Because I don't want Angular to manage the view the map markup is in-lined directly into the page. So instead of rendering the map into the Angular view container, the content is simply set up as inline HTML to display as a sibling to the view container.<div id="MapContent" data-icon="LocationIcon" ng-controller="mapController" style="display:none"> <div class="headerbar"> <div class="right-header" style="float:right"> <a id="btnShowSaveLocationDialog" class="iconbutton btn btn-sm" href="#/saveLocation" style="margin-right: 2px;"> <i class="icon-ok icon-2x" style="color: lightgreen; "></i> Save Location </a> </div> <div class="left-header">GeoCrumbs</div> </div> <div class="clearfix"></div> <div id="Message"> <i id="MessageIcon"></i> <span id="MessageText"></span> </div> <div id="Map" class="content-area"> </div> </div> <div id="ViewPlaceholder" ng-view></div>Note that there's the #MapContent element and the #ViewPlaceHolder. The #MapContent is my static map view that is always 'live' and is initially hidden. It is initially hidden and doesn't get made visible until the MapController controller activates it which does the initial rendering of the map. After that the element is persisted with the map data already loaded and any future access only updates the map with new locations/pins etc.Note that default route is assigned to the mapController, which means that the mapController is fired right as the page loads, which is actually a good thing in this case, as the map is the cornerstone of this app that is manipulated by some of the other controllers/views.The Controller handles some UISince there's effectively no view activation with the template-less route, the controller unfortunately has to take over some UI interaction directly. Specifically it has to swap the hidden state between the map and any of the other views.Here's what the controller looks like:myApp.controller('mapController', ["$scope", "$routeParams", "locationData", function($scope, $routeParams, locationData) { $scope.locationData = locationData.location; $scope.locationHistory = locationData.locationHistory; if ($routeParams.mode == "currentLocation") { bc.getCurrentLocation(false); } bc.showMap(false,"#LocationIcon"); }]);bc.showMap is responsible for a couple of display tasks that hide/show the views/map and for activating/deactivating icons. The code looks like this:this.showMap = function (hide,selActiveIcon) { if (!hide) $("#MapContent").show(); else { $("#MapContent").hide(); } self.fitContent(); if (selActiveIcon) { $(".iconbutton").removeClass("active"); $(selActiveIcon).addClass("active"); } };Each of the other controllers in the app also call this function when they are activated to basically hide the map and make the View Content area visible. The map controller makes the map.This is UI code and calling this sort of thing from controllers is generally not recommended, but I couldn't figure out a way using directives to make this work any more easily than this. It'd be easy to hide and show the map and view container using a flag an ng-show, but it gets tricky because of scoping of the $scope. I would have to resort to storing this setting on the $rootscope which I try to avoid. The same issues exists with the icons.It sure would be nice if Angular had a way to explicitly specify that a View shouldn't be destroyed when another view is activated, so currently this workaround is required. Searching around, I saw a number of whacky hacks to get around this, but this solution I'm using here seems much easier than any of that I could dig up even if it doesn't quite fit the 'Angular way'.Angular nice, until it's notOverall I really like Angular and the way it works although it took me a bit of time to get my head around how all the pieces fit together. Once I got the idea how the app/routes, the controllers and views snap together, putting together Angular pages becomes fairly straightforward. You can get quite a bit done never going beyond those basics. For most common things Angular's default routing and view presentation works very well.But, when you do something a bit more complex, where there are multiple dependencies or as in this case where Angular doesn't appear to support a feature that's absolutely necessary, you're on your own. Finding information on more advanced topics is not trivial especially since versions are changing so rapidly and the low level behaviors are changing frequently so finding something that works is often an exercise in trial and error. Not that this is surprising. Angular is a complex piece of kit as are all the frameworks that try to hack JavaScript into submission to do something that it was really never designed to. After all everything about a framework like Angular is an elaborate hack. A lot of shit has to happen to make this all work together and at that Angular (and Ember, Durandel etc.) are pretty amazing pieces of JavaScript code. So no harm, no foul, but I just can't help feeling like working in toy sandbox at times :-)© Rick Strahl, West Wind Technologies, 2005-2013Posted in Angular  JavaScript   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • What's up with LDoms: Part 1 - Introduction & Basic Concepts

    - by Stefan Hinker
    LDoms - the correct name is Oracle VM Server for SPARC - have been around for quite a while now.  But to my surprise, I get more and more requests to explain how they work or to give advise on how to make good use of them.  This made me think that writing up a few articles discussing the different features would be a good idea.  Now - I don't intend to rewrite the LDoms Admin Guide or to copy and reformat the (hopefully) well known "Beginners Guide to LDoms" by Tony Shoumack from 2007.  Those documents are very recommendable - especially the Beginners Guide, although based on LDoms 1.0, is still a good place to begin with.  However, LDoms have come a long way since then, and I hope to contribute to their adoption by discussing how they work and what features there are today.  In this and the following posts, I will use the term "LDoms" as a common abbreviation for Oracle VM Server for SPARC, just because it's a lot shorter and easier to type (and presumably, read). So, just to get everyone on the same baseline, lets briefly discuss the basic concepts of virtualization with LDoms.  LDoms make use of a hypervisor as a layer of abstraction between real, physical hardware and virtual hardware.  This virtual hardware is then used to create a number of guest systems which each behave very similar to a system running on bare metal:  Each has its own OBP, each will install its own copy of the Solaris OS and each will see a certain amount of CPU, memory, disk and network resources available to it.  Unlike some other type 1 hypervisors running on x86 hardware, the SPARC hypervisor is embedded in the system firmware and makes use both of supporting functions in the sun4v SPARC instruction set as well as the overall CPU architecture to fulfill its function. The CMT architecture of the supporting CPUs (T1 through T4) provide a large number of cores and threads to the OS.  For example, the current T4 CPU has eight cores, each running 8 threads, for a total of 64 threads per socket.  To the OS, this looks like 64 CPUs.  The SPARC hypervisor, when creating guest systems, simply assigns a certain number of these threads exclusively to one guest, thus avoiding the overhead of having to schedule OS threads to CPUs, as do typical x86 hypervisors.  The hypervisor only assigns CPUs and then steps aside.  It is not involved in the actual work being dispatched from the OS to the CPU, all it does is maintain isolation between different guests. Likewise, memory is assigned exclusively to individual guests.  Here,  the hypervisor provides generic mappings between the physical hardware addresses and the guest's views on memory.  Again, the hypervisor is not involved in the actual memory access, it only maintains isolation between guests. During the inital setup of a system with LDoms, you start with one special domain, called the Control Domain.  Initially, this domain owns all the hardware available in the system, including all CPUs, all RAM and all IO resources.  If you'd be running the system un-virtualized, this would be what you'd be working with.  To allow for guests, you first resize this initial domain (also called a primary domain in LDoms speak), assigning it a small amount of CPU and memory.  This frees up most of the available CPU and memory resources for guest domains.  IO is a little more complex, but very straightforward.  When LDoms 1.0 first came out, the only way to provide IO to guest systems was to create virtual disk and network services and attach guests to these services.  In the meantime, several different ways to connect guest domains to IO have been developed, the most recent one being SR-IOV support for network devices released in version 2.2 of Oracle VM Server for SPARC. I will cover these more advanced features in detail later.  For now, lets have a short look at the initial way IO was virtualized in LDoms: For virtualized IO, you create two services, one "Virtual Disk Service" or vds, and one "Virtual Switch" or vswitch.  You can, of course, also create more of these, but that's more advanced than I want to cover in this introduction.  These IO services now connect real, physical IO resources like a disk LUN or a networt port to the virtual devices that are assigned to guest domains.  For disk IO, the normal case would be to connect a physical LUN (or some other storage option that I'll discuss later) to one specific guest.  That guest would be assigned a virtual disk, which would appear to be just like a real LUN to the guest, while the IO is actually routed through the virtual disk service down to the physical device.  For network, the vswitch acts very much like a real, physical ethernet switch - you connect one physical port to it for outside connectivity and define one or more connections per guest, just like you would plug cables between a real switch and a real system. For completeness, there is another service that provides console access to guest domains which mimics the behavior of serial terminal servers. The connections between the virtual devices on the guest's side and the virtual IO services in the primary domain are created by the hypervisor.  It uses so called "Logical Domain Channels" or LDCs to create point-to-point connections between all of these devices and services.  These LDCs work very similar to high speed serial connections and are configured automatically whenever the Control Domain adds or removes virtual IO. To see all this in action, now lets look at a first example.  I will start with a newly installed machine and configure the control domain so that it's ready to create guest systems. In a first step, after we've installed the software, let's start the virtual console service and downsize the primary domain.  root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-c-- UART 512 261632M 0.3% 2d 13h 58m root@sun # ldm add-vconscon port-range=5000-5100 \ primary-console primary root@sun # svcadm enable vntsd root@sun # svcs vntsd STATE STIME FMRI online 9:53:21 svc:/ldoms/vntsd:default root@sun # ldm set-vcpu 16 primary root@sun # ldm set-mau 1 primary root@sun # ldm start-reconf primary root@sun # ldm set-memory 7680m primary root@sun # ldm add-config initial root@sun # shutdown -y -g0 -i6 So what have I done: I've defined a range of ports (5000-5100) for the virtual network terminal service and then started that service.  The vnts will later provide console connections to guest systems, very much like serial NTS's do in the physical world. Next, I assigned 16 vCPUs (on this platform, a T3-4, that's two cores) to the primary domain, freeing the rest up for future guest systems.  I also assigned one MAU to this domain.  A MAU is a crypto unit in the T3 CPU.  These need to be explicitly assigned to domains, just like CPU or memory.  (This is no longer the case with T4 systems, where crypto is always available everywhere.) Before I reassigned the memory, I started what's called a "delayed reconfiguration" session.  That avoids actually doing the change right away, which would take a considerable amount of time in this case.  Instead, I'll need to reboot once I'm all done.  I've assigned 7680MB of RAM to the primary.  That's 8GB less the 512MB which the hypervisor uses for it's own private purposes.  You can, depending on your needs, work with less.  I'll spend a dedicated article on sizing, discussing the pros and cons in detail. Finally, just before the reboot, I saved my work on the ILOM, to make this configuration available after a powercycle of the box.  (It'll always be available after a simple reboot, but the ILOM needs to know the configuration of the hypervisor after a power-cycle, before the primary domain is booted.) Now, lets create a first disk service and a first virtual switch which is connected to the physical network device igb2. We will later use these to connect virtual disks and virtual network ports of our guest systems to real world storage and network. root@sun # ldm add-vds primary-vds root@sun # ldm add-vswitch net-dev=igb2 switch-primary primary You are free to choose whatever names you like for the virtual disk service and the virtual switch.  I strongly recommend that you choose names that make sense to you and describe the function of each service in the context of your implementation.  For the vswitch, for example, you could choose names like "admin-vswitch" or "production-network" etc. This already concludes the configuration of the control domain.  We've freed up considerable amounts of CPU and RAM for guest systems and created the necessary infrastructure - console, vts and vswitch - so that guests systems can actually interact with the outside world.  The system is now ready to create guests, which I'll describe in the next section. For further reading, here are some recommendable links: The LDoms 2.2 Admin Guide The "Beginners Guide to LDoms" The LDoms Information Center on MOS LDoms on OTN

    Read the article

  • CodePlex Daily Summary for Sunday, April 18, 2010

    CodePlex Daily Summary for Sunday, April 18, 2010New ProjectsBare Bones Email Trace Listener: Bare Bones Email Trace Listener is about the simplest email trace listener you can have. No bells, no whistles, and no good if you need authenticat...Cartellino: Scopo del progetto è la realizzazione di un software in grado di rilevare i dati dai rilevatori 3Tec (www.3tec.it) e stampare i cartellini presenza...Castle Windsor app.config Properties: The Castle Windsor app.config Properties library makes it possible for users of Castle Windsor to reference appSettings values in Windsor's XML pro...DeskD: This is a simple desktop dictionary application(something like WordWeb) created in Java using Netbeans IDE. Since i am new to codeplex all updates ...FunPokerMakerOnline: It is a play of poker online with a game editor. It is done with .net 4 and WPF and SOAP or WCF. KLOCS Team GIN Project: This is a Master's Degree program group project. It may have academic interest, but won't be maintained after June 2010KNN: This is KNN projectProject Santa: Program to organize teams using mysql databases and c# in a clean and robust task and group system. For more information see my blog post at http:/...ProjetoIntegradoJuridico: Sistema Integrado de Acompanhamento JurídicoRSSR for Windows Phone 7: This is a simple RSS reader application, the project aims to show people that it is easy to build application for windows phones. The applicatio...Simple Rcon: Simple Rcon is a simple lightweight rcon client for HL1/HL2 Servers. It is developed in C# and WPFTAB METHOD SQL Create a data dictionary from your Transact SQL code: TABMETHODSQL makes it easier for data/information workers to document their work. Create a data governance solution that maps sql data process, inc...TM BF Tournament: WPF software to manage Trackmania tournament with Battle France RulesviBlog: visinia plugin, this plugin is used to add blogging facility in visinia cmsviNews: visinia plugin, this plugin can be used to create a news portal like cnn.com nytimeVolumeMaster: VolumeMaster is an On Screen Display (OSD) that gets activated whenever the volume changes. It's written in WPF and uses Vista Core Audio API by Ra...WiiCIS.NET: This is a managed port of WiiCIS, which is a Nintendo Wiimote library originally created by TheOboeNerd and posted on Sourceforge.New ReleasesCastle Windsor app.config Properties: Version 1.0: Initial release.Code for Rapid C# Windows Development eBook: Enumerable Debugger Visualizer Version 1.1: Second release of the Enumerable Debugger Visualizer. There are more classes registered and it is more robust. The list of classes I have register...Convection Game Engine (Basic Edition): Convection Basic (40223): Compiled version of Convection Basic change set 40223.CycleMania Starter Kit EAP - ASP.NET 4 Problem - Design - Solution: Cyclemania 0.08.59: See Source Code tab for recent change history.DbEntry.Net (Lephone Framework): DbEntry.Net 3.9: DbEntry.Net is a lightweight Object Relational Mapping (ORM) database access compnent for .Net 3.5. It has clearly and easily programing interface ...Hash Calculator: HashCalculator 2.0: Upgraded to .NET Framework 4.0 Added support to calculate CRC32 hash function Added "Cancel" button in the Windows 7 taskbar thumbnailHKGolden Express: HKGoldenExpress (Build 201004172120): New features: Added jump links at top of page of message. Bug fix: Fixed page count bug. Improvements: HKGolden Express now uses DocumentBuild...HTML Ruby: 6.21.4: Styles added to override those on some sites for better rendering of ruby Fix regression on complex ruby annotation rendering Better spacingHTML Ruby: 6.21.5: Removed debug code in preference handling Status bar indicator now resets for each action Replace ruby in place without using document fragment...IceChat: IceChat 2009 Alpha 12.4 EXE Update: This is simply an update to the main IceChat program files and DLL. Simpply overwrite the ones in the place where IceChat 2009 is installed.IceChat: IceChat 2009 Alpha 12.4 Full Install: Build Alpha 12.4 - April 17 2010 Added IceChatScript.dll , needs to be added in same folder with EXE and IPluginIceChat.dll Added Self Notice in ...PokeIn Comet Ajax Library: PokeIn Library v05 x64: With this version, PokeIn library has become a stable. Numerous tests have completed. This is the first release candidate of PokeIn. Cheers!PokeIn Comet Ajax Library: PokeIn Library v05 x86: PokeIn Library version 0.5 (x86) With this version, PokeIn library has become a stable. Numerous tests have completed. This is the first release c...Project Santa: Project Santa V1.0: The first initial release of my project manager program, for more information see http://coderplex.blogspot.com/2010/04/project-manager-using-mysq...Salient: TestingWithVSDevServer v1: Using code from Salient, I have assembled a few strategies for programmatic contol of the Visual Studio Development Server (WebDev.WebServer.exe). ...SharePoint Navigation Menu: spNavigationMenu 1.1: Changed the CAML query so it will order by Link Order, then Title. Added the ability to override the On Hover event on the parent menu to use On ...Simple Rcon: Simple Rcon Version 1: Version 1TAB METHOD SQL Create a data dictionary from your Transact SQL code: RELEASE 1: TESTING THE RELEASE SYSTEMTribe.Cache: Tribe.Cache Beta 0.1: Beta release of Tribe.Cache - Now with cache expiration serviceviBlog: viBlog_beta: visinia plugin to add blogging facility in visinia cmsviNews: viNews_beta: visinia plugin.visinia: visinia_beta2: visinia beta 2 released with many new feature.Visual Studio DSite: Visual C++ 2008 Login Form: A simple login form made in visual c 2008. Source code only.WiiCIS.NET: WiiCIS.NET v0.11: 0.11 Removed an unnecessary function from the Wiimote class, and improved the demo. You will need the latest version of SlimDX to compile the sourc...WinControls TreeListView: TreeListView 1.5.1: -fixes issue #5837 -Preliminary feature #5874WoW Character Viewer: Viewer Setup: Finally, I've brought out the next setup of WoW Viewer. Most loose ends have been tied up. Loading and Saving of character files has been fixed.Most Popular ProjectsRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseMicrosoft SQL Server Community & Samplespatterns & practices – Enterprise LibraryPHPExcelFacebook Developer ToolkitBlogEngine.NETMvcContrib: a Codeplex Foundation projectIronPythonMost Active ProjectsRawrpatterns & practices – Enterprise LibraryIndustrial DashboardFarseer Physics EnginejQuery Library for SharePoint Web ServicesIonics Isapi Rewrite FilterGMap.NET - Great Maps for Windows Forms & PresentationProxi [Proxy Interface]BlogEngine.NETCaliburn: An Application Framework for WPF and Silverlight

    Read the article

  • Using Table-Valued Parameters With SQL Server Reporting Services

    - by Jesse
    In my last post I talked about using table-valued parameters to pass a list of integer values to a stored procedure without resorting to using comma-delimited strings and parsing out each value into a TABLE variable. In this post I’ll extend the “Customer Transaction Summary” report example to see how we might leverage this same stored procedure from within an SQL Server Reporting Services (SSRS) report. I’ve worked with SSRS off and on for the past several years and have generally found it to be a very useful tool for building nice-looking reports for end users quickly and easily. That said, I’ve been frustrated by SSRS from time to time when seemingly simple things are difficult to accomplish or simply not supported at all. I thought that using table-valued parameters from within a SSRS report would be simple, but unfortunately I was wrong. Customer Transaction Summary Example Let’s take the “Customer Transaction Summary” report example from the last post and try to plug that same stored procedure into an SSRS report. Our report will have three parameters: Start Date – beginning of the date range for which the report will summarize customer transactions End Date – end of the date range for which the report will summarize customer transactions Customer Ids – One or more customer Ids representing the customers that will be included in the report The simplest way to get started with this report will be to create a new dataset and point it at our Customer Transaction Summary report stored procedure (note that I’m using SSRS 2012 in the screenshots below, but there should be little to no difference with SSRS 2008): When you initially create this dataset the SSRS designer will try to invoke the stored procedure to determine what the parameters and output fields are for you automatically. As part of this process the following dialog pops-up: Obviously I can’t use this dialog to specify a value for the ‘@customerIds’ parameter since it is of the IntegerListTableType user-defined type that we created in the last post. Unfortunately this really throws the SSRS designer for a loop, and regardless of what combination of Data Type, Pass Null Value, or Parameter Value I used here, I kept getting this error dialog with the message, "Operand type clash: nvarchar is incompatible with IntegerListTableType". This error message makes some sense considering that the nvarchar type is indeed incompatible with the IntegerListTableType, but there’s little clue given as to how to remedy the situation. I don’t know for sure, but I think that behind-the-scenes the SSRS designer is trying to give the @customerIds parameter an nvarchar-typed SqlParameter which is causing the issue. When I first saw this error I figured that this might just be a limitation of the dataset designer and that I’d be able to work around the issue by manually defining the parameters. I know that there are some special steps that need to be taken when invoking a stored procedure with a table-valued parameter from ADO .NET, so I figured that I might be able to use some custom code embedded in the report  to create a SqlParameter instance with the needed properties and value to make this work, but the “Operand type clash" error message persisted. The Text Query Approach Just because we’re using a stored procedure to create the dataset for this report doesn’t mean that we can’t use the ‘Text’ Query Type option and construct an EXEC statement that will invoke the stored procedure. In order for this to work properly the EXEC statement will also need to declare and populate an IntegerListTableType variable to pass into the stored procedure. Before I go any further I want to make one point clear: this is a really ugly hack and it makes me cringe to do it. Simply put, I strongly feel that it should not be this difficult to use a table-valued parameter with SSRS. With that said, let’s take a look at what we’ll have to do to make this work. Manually Define Parameters First, we’ll need to manually define the parameters for report by right-clicking on the ‘Parameters’ folder in the ‘Report Data’ window. We’ll need to define the ‘@startDate’ and ‘@endDate’ as simple date parameters. We’ll also create a parameter called ‘@customerIds’ that will be a mutli-valued Integer parameter: In the ‘Available Values’ tab we’ll point this parameter at a simple dataset that just returns the CustomerId and CustomerName of each row in the Customers table of the database or manually define a handful of Customer Id values to make available when the report runs. Once we have these parameters properly defined we can take another crack at creating the dataset that will invoke the ‘rpt_CustomerTransactionSummary’ stored procedure. This time we’ll choose the ‘Text’ query type option and put the following into the ‘Query’ text area: 1: exec('declare @customerIdList IntegerListTableType ' + @customerIdInserts + 2: ' EXEC rpt_CustomerTransactionSummary 3: @startDate=''' + @startDate + ''', 4: @endDate='''+ @endDate + ''', 5: @customerIds=@customerIdList')   By using the ‘Text’ query type we can enter any arbitrary SQL that we we want to and then use parameters and string concatenation to inject pieces of that query at run time. It can be a bit tricky to parse this out at first glance, but from the SSRS designer’s point of view this query defines three parameters: @customerIdInserts – This will be a Text parameter that we use to define INSERT statements that will populate the @customerIdList variable that is being declared in the SQL. This parameter won’t actually ever get passed into the stored procedure. I’ll go into how this will work in a bit. @startDate – This is a simple date parameter that will get passed through directly into the @startDate parameter of the stored procedure on line 3. @endDate – This is another simple data parameter that will get passed through into the @endDate parameter of the stored procedure on line 4. At this point the dataset designer will be able to correctly parse the query and should even be able to detect the fields that the stored procedure will return without needing to specify any values for query when prompted to. Once the dataset has been correctly defined we’ll have a @customerIdInserts parameter listed in the ‘Parameters’ tab of the dataset designer. We need to define an expression for this parameter that will take the values selected by the user for the ‘@customerIds’ parameter that we defined earlier and convert them into INSERT statements that will populate the @customerIdList variable that we defined in our Text query. In order to do this we’ll need to add some custom code to our report using the ‘Report Properties’ dialog: Any custom code defined in the Report Properties dialog gets embedded into the .rdl of the report itself and (unfortunately) must be written in VB .NET. Note that you can also add references to custom .NET assemblies (which could be written in any language), but that’s outside the scope of this post so we’ll stick with the “quick and dirty” VB .NET approach for now. Here’s the VB .NET code (note that any embedded code that you add here must be defined in a static/shared function, though you can define as many functions as you want): 1: Public Shared Function BuildIntegerListInserts(ByVal variableName As String, ByVal paramValues As Object()) As String 2: Dim insertStatements As New System.Text.StringBuilder() 3: For Each paramValue As Object In paramValues 4: insertStatements.AppendLine(String.Format("INSERT {0} VALUES ({1})", variableName, paramValue)) 5: Next 6: Return insertStatements.ToString() 7: End Function   This method takes a variable name and an array of objects. We use an array of objects here because that is how SSRS will pass us the values that were selected by the user at run-time. The method uses a StringBuilder to construct INSERT statements that will insert each value from the object array into the provided variable name. Once this method has been defined in the custom code for the report we can go back into the dataset designer’s Parameters tab and update the expression for the ‘@customerIdInserts’ parameter by clicking on the button with the “function” symbol that appears to the right of the parameter value. We’ll set the expression to: 1: =Code.BuildIntegerListInserts("@customerIdList ", Parameters!customerIds.Value)   In order to invoke our custom code method we simply need to invoke “Code.<method name>” and pass in any needed parameters. The first parameter needs to match the name of the IntegerListTableType variable that we used in the EXEC statement of our query. The second parameter will come from the Value property of the ‘@customerIds’ parameter (this evaluates to an object array at run time). Finally, we’ll need to edit the properties of the ‘@customerIdInserts’ parameter on the report to mark it as a nullable internal parameter so that users aren’t prompted to provide a value for it when running the report. Limitations And Final Thoughts When I first started looking into the text query approach described above I wondered if there might be an upper limit to the size of the string that can be used to run a report. Obviously, the size of the actual query could increase pretty dramatically if you have a parameter that has a lot of potential values or you need to support several different table-valued parameters in the same query. I tested the example Customer Transaction Summary report with 1000 selected customers without any issue, but your mileage may vary depending on how much data you might need to pass into your query. If you think that the text query hack is a lot of work just to use a table-valued parameter, I agree! I think that it should be a lot easier than this to use a table-valued parameter from within SSRS, but so far I haven’t found a better way. It might be possible to create some custom .NET code that could build the EXEC statement for a given set of parameters automatically, but exploring that will have to wait for another post. For now, unless there’s a really compelling reason or requirement to use table-valued parameters from SSRS reports I would probably stick with the tried and true “join-multi-valued-parameter-to-CSV-and-split-in-the-query” approach for using mutli-valued parameters in a stored procedure.

    Read the article

  • MIX 2010 Covert Operations Day 2 Silverlight + Windows 7 Phone

    - by GeekAgilistMercenary
    Left the Circus Circus and headed to the geek circus at Mandalay Bay.  Got in, got some breakfast, met a few more people and headed to the keynote. Upon arriving the crew I was hanging with at the event; Erik Mork, Beth Murray, and Brian Henderson and I were entertained with several other thousand geeks by the wicked yo-yoing. The first video demo of something was of Bing Maps and various aspects of Microsoft Research integrated together.  Namely the pictures, put in place, on real 3d element maps of various environments. Silverlight Scott Guthrie, as one would guess, kicked off the keynote.  His first point was that user experience has become a priority at Microsoft.  This can be seen by any observant soul with the release and push of Expression, Silverlight, and the other tools.  This is even more apparent when one takes note of Microsoft bringing in people that can actually do good design and putting them at the forefront. The next thing Scott brought up was a few key points about Silverlight.  Currently Silverlight is a little over 2 years old and has achieved a pretty solid 60% penetration.  Silverlight has all sorts of capabilities that have been developed and are now provided as open source including;  ad injection, smoothing, playback editing, and more.  Another thing he showed, which really struck me as awesome being in the analytics space, was the Olympics and a quick glimpse of the ad statistics, viewer experience, video playback performance, audience trends, and overall viewer participation.  All of it rendered in Silverlight in beautiful detail. The key piece of Scott's various points were all punctuated with the fact that all of this code is available as open source.  Not only is Microsoft really delving into this design element of things, they're getting involved in the right ways. One of the last points I'll bring up about Silverlight 4 is the ability to have HD video on a monitor, and an entirely different activity being done on the other monitor, effectively making Silverlight the only RIA framework that supports multi-monitor support.  Overall, Silverlight is continuing to impress – providing superior capabilities tit-for-tat with the competition. Windows 7 Phone The Windows 7 Phone has 3 primary buttons (yes, more than the iPhone, don't let your mind explode!!).  Start, Search, and Back control all of the needed functionality of the phone.  At the same time, of course, there is the multi-touch, touch, and other interactive abilities of the interface.  The intent, once start is pressed is to have all the information that a phone owner wants displayed immediately.  Avoiding the scrolling through pages of apps or rolling a ball to get through multitudes of other non-interactive phone interfaces.  The Windows 7 Phone simply has the data right in front of you, basically a phone dashboard.  From there it is easy to dive into the interactive areas of the phone. Each area of the interface of the phone is broken into hubs.  These hubs include applications, data, and other things based on a relative basis.  This basis being determined by the user.  These applications interact on many other levels, and form a kind of relationship between each other adding more and more meta-data to the phone user, their interactions between the applications, and of course the social element of their interactions on the phone.  This makes this phone a practical must have for a marketer involved in social media.  The level of wired together interaction is massive, and of course, if you've seen Office Outlook 2010 you know that the power that is pulled into the phone by being tied to Outlook is massive. Joe Belfiore also showed several UI & specifically UX elements of the phone interface that allows paging to be instinctual by simple clipped items, flipping page to page, and other excellent user experience advances for phone devices.  Belfiore's also showed how his people hub had a massive list of people, with pictures, all from various different social networks and other associated relations.  The rendering, speed, and viewing of these people's, their pictures, their social network information, and other characteristics was smooth and in some situations unbelievably rendered.  This demo showed some of the great power of the beta phone, which isn't even as powerful as the planned end device. Joe finished up by jumping into the music, videos, and other media with the Zune Component of the Windows 7 Mobile Phone.  This was all good stuff, but I'll get to what really sold me on the media element in a moment. When Joe was done, Scott Guthrie stepped back up to walk through building a Windows 7 Mobile Phone.  This is were I have to give serious props.  He built this application, in Visual Studio 2010, in front of 2000+ people.  That was cool, but what really was amazing that he build the application in about 2 minutes.  The IDE, side by side design that is standard in Visual Studio is light years ahead of x-Code or any of the iPhone IDEs.  The Windows 7 Mobile System, if it can get market penetration, poses a technologically superior development and phone platform over anything on the market right now.  The biggest problem with the phone, is it just isn't available yet.  I personally can't wait for a chance to build some apps for the new Windows Phone. Netflix, I May Start Up an Account Again! When I get my Windows 7 Phone device, I am absolutely getting a Netflix account again.  The Vertigo crew, as I wrote on Twitter "#MIX10 Props @seesharp on @netflix demo", displayed an application on the phone for Netflix that actually ran HD Video of Rescue Me (with Dennis Leary).  The video played back smooth as it would on a dedicated computer, I was instantly sold.  So this didn't actually sell me on the phone, because I'm already sold, but it did sell me whole heartedly on the media capabilities of the pending phone. Anyway, I try not to do this but I may double post today.  Lunch is over and I'm off to another session very near and dear to the heart of my occupation, Analytics Tracking.  Stay tuned and I should have that post up by the end of the day. Original Post – Check out my other blog for even more technical ramblings and reads.

    Read the article

  • Azure, don't give me multiple VMs, give me one elastic VM

    - by FransBouma
    Yesterday, Microsoft revealed new major features for Windows Azure (see ScottGu's post). It all looks shiny and great, but after reading most of the material describing the new features, I still find the overall idea behind all of it flawed: why should I care on how much VMs my web app runs? Isn't that a problem to solve for the Windows Azure engineers / software? And what if I need the file system, why can't I simply get a virtual filesystem ? To illustrate my point, let's use a real example: a product website with a customer system/database and next to it a support site with accompanying database. Both are written in .NET, using ASP.NET and use a SQL Server database each. The product website offers files to download by customers, very simple. You have a couple of options to host these websites: Buy a server, place it in a rack at an ISP and run the sites on that server Use 'shared hosting' with an ISP, which means your sites' appdomains are running on the same machine, as well as the files stored, and the databases are hosted in the same server as the other shared databases. Hire a VM, install your OS of choice at an ISP, and host the sites on that VM, basically the same as the first option, except you don't have a physical server At some cloud-vendor, either host the sites 'shared' or in a VM. See above. With all of those options, scalability is a problem, even the cloud-based ones, though not due to the same reasons: The physical server solution has the obvious problem that if you need more power, you need to buy a bigger server or more servers which requires you to add replication and other overhead Shared hosting solutions are almost always capped on memory usage / traffic and database size: if your sites get too big, you have to move out of the shared hosting environment and start over with one of the other solutions The VM solution, be it a VM at an ISP or 'in the cloud' at e.g. Windows Azure or Amazon, in theory allows scaling out by simply instantiating more VMs, however that too introduces the same overhead problems as with the physical servers: suddenly more than 1 instance runs your sites. If a cloud vendor offers its services in the form of VMs, you won't gain much over having a VM at some ISP: the main problems you have to work around are still there: when you spin up more than one VM, your application must be completely stateless at any moment, including the DB sub system, because what's in memory in instance 1 might not be in memory in instance 2. This might sounds trivial but it's not. A lot of the websites out there started rather small: they were perfectly runnable on a single machine with normal memory and CPU power. After all, you don't need a big machine to run a website with even thousands of users a day. Moving these sites to a multi-VM environment will cause a problem: all the in-memory state they use, all the multi-page transitions they use while keeping state across the transition, they can't do that anymore like they did that on a single machine: state is something of the past, you have to store every byte of state in either a DB or in a viewstate or in a cookie somewhere so with the next request, all state information is available through the request, as nothing is kept in-memory. Our example uses a bunch of files in a file system. Using multiple VMs will require that these files move to a cloud storage system which is mounted in each VM so we don't have to store the files on each VM. This might require different file paths, but this change should be minor. What's perhaps less minor is the maintenance procedure in place on the new type of cloud storage used: instead of ftp-ing into a VM, you might have to update the files using different ways / tools. All in all this makes moving an existing website which was written for an environment that's based around a VM (namely .NET with its CLR) overly cumbersome and problematic: it forces you to refactor your website system to be able to be used 'in the cloud', which is caused by the limited way how e.g. Windows Azure offers its cloud services: in blocks of VMs. Offer a scalable, flexible VM which extends with my needs Instead, cloud vendors should offer simply one VM to me. On that VM I run the websites, store my DB and my files. As it's a virtual machine, how this machine is actually ran on physical hardware (e.g. partitioned), I don't care, as that's the problem for the cloud vendor to solve. If I need more resources, e.g. I have more traffic to my server, way more visitors per day, the VM stretches, like I bought a bigger box. This frees me from the problem which comes with multiple VMs: I don't have any refactoring to do at all: I can simply build my website as if it runs on my local hardware server, upload it to the VM offered by the cloud vendor, install it on the VM and I'm done. "But that might require changes to windows!" Yes, but Microsoft is Windows. Windows Azure is their service, they can make whatever change to what they offer to make it look like it's windows. Yet, they're stuck, like Amazon, in thinking in VMs, which forces developers to 'think ahead' and gamble whether they would need to migrate to a cloud with multiple VMs in the future or not. Which comes down to: gamble whether they should invest time in code / architecture which they might never need. (YAGNI anyone?) So the VM we're talking about, is that a low-level VM which runs a guest OS, or is that VM a different kind of VM? The flexible VM: .NET's CLR ? My example websites are ASP.NET based, which means they run inside a .NET appdomain, on the .NET CLR, which is a VM. The only physical OS resource the sites need is the file system, however this too is accessed through .NET. In short: all the websites see is what .NET allows the websites to see, the world as the websites know it is what .NET shows them and lets them access. How the .NET appdomain is run physically, that's the concern of .NET, not mine. This begs the question why Windows Azure doesn't offer virtual appdomains? Or better: .NET environments which look like one machine but could be physically multiple machines. In such an environment, no change has to be made to the websites to migrate them from a local machine or own server to the cloud to get proper scaling: the .NET VM will simply scale with the need: more memory needed, more CPU power needed, it stretches. What it offers to the application running inside the appdomain is simply increasing, but not fragmented: all resources are available to the application: this means that the problem of how to scale is back to where it should be: with the cloud vendor. "Yeah, great, but what about the databases?" The .NET application communicates with the database server through a .NET ADO.NET provider. Where the database is located is not a problem of the appdomain: the ADO.NET provider has to solve that. I.o.w.: we can host the databases in an environment which offers itself as a single resource and is accessible through one connection string without replication overhead on the outside, and use that environment inside the .NET VM as if it was a single DB. But what about memory replication and other problems? This environment isn't simple, at least not for the cloud vendor. But it is simple for the customer who wants to run his sites in that cloud: no work needed. No refactoring needed of existing code. Upload it, run it. Perhaps I'm dreaming and what I described above isn't possible. Yet, I think if cloud vendors don't move into that direction, what they're offering isn't interesting: it doesn't solve a problem at all, it simply offers a way to instantiate more VMs with the guest OS of choice at the cost of me needing to refactor my website code so it can run in the straight jacket form factor dictated by the cloud vendor. Let's not kid ourselves here: most of us developers will never build a website which needs a truck load of VMs to run it: almost all websites created by developers can run on just a few VMs at most. Yet, the most expensive change is right at the start: moving from one to two VMs. As soon as you have refactored your website code to run across multiple VMs, adding another one is just as easy as clicking a mouse button. But that first step, that's the problem here and as it's right there at the beginning of scaling the website, it's particularly strange that cloud vendors refuse to solve that problem and leave it to the developers to solve that. Which makes migrating 'to the cloud' particularly expensive.

    Read the article

  • This is the End of Business as Usual...

    - by Michael Snow
    This week, we'll be hosting our last Social Business Thought Leader Series Webcast for 2012. Our featured guest this week will be Brian Solis of Altimeter Group. As we've been going through the preparations for Brian's webcast, it became very clear that an hour's time is barely scraping the surface of the depth of Brian's insights and analysis. Accordingly, in the spirit of sharing Brian's perspective for all of our readers, we'll be featuring guest posts all this week pulled from Brian's larger collection of blog postings on his own website. If you like what you've read here this week, we highly recommend digging deeper into his tome of wisdom. Guest Post by Brian Solis, Analyst, Altimeter Group as originally featured on his site with the minor change of the video addition at the beginning of the post. This is the End of Business as Usual and the Beginning of a New Era of Relevance - Brian Solis, Principal Analyst, Altimeter Group The Times They Are A-Changin’ Come gather ’round people Wherever you roam And admit that the waters Around you have grown And accept it that soon You’ll be drenched to the bone If your time to you Is worth savin’ Then you better start swimmin’ Or you’ll sink like a stone For the times they are a-changin’. - Bob Dylan I’m sure you are wondering why I chose lyrics to open this article. If you skimmed through them, stop here for a moment. Go back through the Dylan’s words and take your time. Carefully read, and feel, what it is he’s saying and savor the moment to connect the meaning of his words to the challenges you face today. His message is as important and true today as it was when they were first written in 1964. The tide is indeed once again turning. And even though the 60s now live in the history books, right here, right now, Dylan is telling us once again that this is our time to not only sink or swim, but to do something amazing. This is your time. This is our time. But, these times are different and what comes next is difficult to grasp. How people communicate. How people learn and share. How people make decisions. Everything is different now. Think about this…you’re reading this article because it was sent to you via email. Yet more people spend their online time in social networks than they do in email. Duh. According to Nielsen, of the total time spent online 22.5% are connecting and communicating in social networks. To put that in perspective, the time spent in the likes of Facebook, Twitter, and Youtube is greater than online gaming at 9.8%, email at 7.6% and search at 4%. Imagine for a moment if you and I were connected to one another in Facebook, which just so happens to be the largest social network in the world. How big? Well, Facebook is the size today of the entire Internet in 2004. There are over 1 billion people friending, Liking, commenting, sharing, and engaging in Facebook…that’s roughly 12% of the world’s population. Twitter has over 200 million users. Ever hear of tumblr? More time is spent on this popular microblogging community than Twitter. The point is that the landscape for communication and all that’s affected by human interaction is profoundly different than how you and I learned, shared or talked to one another yesterday. This transformation is only becoming more pervasive and, it’s not going back. Survival of the Fitting But social media is just one of the channels we can use to reach people. I must be honest. I’m as much a part of tomorrow as I am of yesteryear. It’s why I spend all of my time researching the evolution of media and its impact on business and culture. Because of you, I share everything I learn in newsletters, emails, blogs, Youtube videos, and also traditional books. I’m dedicated to helping everyone not only understand, but grasp the change that’s before you. Technologies such as social, mobile, virtual, augmented, et al compel us adapt our story and value proposition and extend our reach to be part of communities we don’t realize exist. The people who will keep you in business or running tomorrow are the very people you’re not reaching today. Before you continue to read on, allow me to clarify my point of view. My inspiration for writing this is to help you augment, not necessarily replace, the programs you’re running today. We must still reach those whom matter to us in the ways they prefer to be engaged. To reach what I call the connected consumer of Geneeration-C we must too reach them in the ways they wish to be engaged. And in all of my work, how they connect, talk to one another, influence others, and make decisions are not at all like the traditional consumers of the past. Nor are they merely the kids…the Millennial. Connected consumers are representative across every age group and demographic. As you can see, use of social networks, media sharing sites, microblogs, blogs, etc. equally span across Gen Y, Gen X, and Baby Boomers. The DNA of connected customers is indiscriminant of age or any other demographic for that matter. This is more about psychographics, the linkage of people through common interests (than it is their age, gender, education, nationality or level of income. Once someone is introduced to the marvels of connectedness, the sensation becomes a contagion. It touches and affects everyone. And, that’s why this isn’t going anywhere but normalcy. Social networking isn’t just about telling people what you’re doing. Nor is it just about generic, meaningless conversation. Today’s connected consumer is incredibly influential. They’re connected to hundreds and even thousands of other like-minded people. What they experiences, what they support, it’s shared throughout these networks and as information travels, it shapes and steers impressions, decisions, and experiences of others. For example, if we revisit the Nielsen research, we get an idea of just how big this is becoming. 75% spend heavily on music. How does that translate to the arts? I’d imagine the number is equally impressive. If 53% follow their favorite brand or organization, imagine what’s possible. Just like this email list that connects us, connections in social networks are powerful. The difference is however, that people spend more time in social networks than they do in email. Everything begins with an understanding of the “5 W’s and H.E.” – Who, What, When, Where, How, and to What Extent? The data that comes back tells you which networks are important to the people you’re trying to reach, how they connect, what they share, what they value, and how to connect with them. From there, your next steps are to create a community strategy that extends your mission, vision, and value and it align it with the interests, behavior, and values of those you wish to reach and galvanize. To help, I’ve prepared an action list for you, otherwise known as the 10 Steps Toward New Relevance: 1. Answer why you should engage in social networks and why anyone would want to engage with you 2. Observe what brings them together and define how you can add value to the conversation 3. Identify the influential voices that matter to your world, recognize what’s important to them, and find a way to start a dialogue that can foster a meaningful and mutually beneficial relationship 4. Study the best practices of not just organizations like yours, but also those who are successfully reaching the type of people you’re trying to reach – it’s benching marking against competitors and benchmarking against undefined opportunities 5. Translate all you’ve learned into a convincing presentation written to demonstrate tangible opportunity to your executive board, make the case through numbers, trends, data, insights – understanding they have no idea what’s going on out there and you are both the scout and the navigator (start with a recommended pilot so everyone can learn together) 6. Listen to what they’re saying and develop a process to learn from activity and adapt to interests and steer engagement based on insights 7. Recognize how they use social media and innovate based on what you observe to captivate their attention 8. Align your objectives with their objectives. If you’re unsure of what they’re looking for…ask 9. Invest in the development of content, engagement 10. Build a community, invest in values, spark meaningful dialogue, and offer tangible value…the kind of value they can’t get anywhere else. Take advantage of the medium and the opportunity! The reality is that we live and compete in a perpetual era of Digital Darwinism, the evolution of consumer behavior when society and technology evolve faster than our ability to adapt. This is why it’s our time to alter our course. We must connect with those who are defining the future of engagement, commerce, business, and how the arts are appreciated and supported. Even though it is the end of business as usual, it is the beginning of a new age of opportunity. The consumer revolution is already underway, and the question is: How do you better understand the role you play in this production as a connected or social consumer as well as business professional? Again, this is your time to define a new era of engagement and relevance. Originally written for The National Arts Marketing Project Connect with Brian via: Twitter | LinkedIn | Facebook | Google+ --- Note from Michael: If you really like this post above - check out Brian's TEDTalk and his thought process for preparing it in this post: 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} http://www.briansolis.com/2012/10/tedtalk-reinventing-consumer-capitalism-screw-business-as-usual/

    Read the article

  • Understanding Windows 8 Recovery options

    - by stuffe
    Background: I am preparing a PC that I am sending to a relative abroad, who has little or no internet access, and next to no sensible options for getting IT support should anything go wrong. As such I am trying to provide a full set of recovery options such that they are able to reinstall the OS with minimum fuss or assistance if required. The PC is a brand new Acer laptop that came with Windows 7 pre-installed (and an associated recovery partition) and a free upgrade to Windows 8. I have installed Windows 8 from scratch performing a format and clean install from media I burned from the official download. The existing Windows 7 recovery partition is still there, and I can still boot from it. I have created recovery DVDs of that in case it is ever lost. Here are my recovery options so far. I can perform a factory reset of Win 7 via the recovery partition I can perform a factory reset of Win 7 via burned recovery DVDs I can re-install Windows 8 cleanly from a DVD All of these are useful, but not what I want, because the first 2 methods use Win 7, and still fill the machine with crapware, and the latter doesn't provide for any post-install customisation and software installation. So, I am looking to see what other options are available to perform a Windows 8 recovery that will be more than a simple install. I am aware that Win8 comes with some useful refresh tools: Refresh your PC - Re-install Win 8 over the top of your existing installation, recovering from any Windows corruption etc. I can run this from my current install, although it says some files are missing that will be provided by me install or recovery media, which seems to be code for stick your install DVD in, and it starts after I do that - unfortunately for this particular laptop you need to specify a particular WIFI driver or the install bombs out part way through with IRQL errors, and this refresh method skips the part where you can load a driver, so it's no use to me. I think I can fix this by creating a custom recovery image using the recimg.exe command but it takes hours to complete so I haven't tried it yet. Reset your PC - Perform a full install and lose all your files. Again it needs my Install media inserting before it will do anything, but then it provides an error (will include later when I recreate it...) Now, these recovery options look useful (in principal, although both are fail for me) but they rely on having a working system to access the tools, which leads me to the last option, of making a Recovery USB drive. I have made a recovery drive, and it should perform loads of useful things, including copying my WIN7 recovery partition to the drive, providing the above refresh and reset options, providing other troubleshooting options and also the ability to restore from a custom image, only none of them seem to work for me. Creating the Recovery Drive - the option to include my recovery partition is greyed out. The partition exists and works fine, why will it not copy it? Refresh - I imagine this would have the same issues as I described before, but this is moot because when I try it says that the "drive where Windows is installed is locked, please unlock the drive and try again" with no info on what that means and how to do it. Restore - Again, probably pointless as I can just use the DVD, but it also errors: "unable to reset your PC. A required drive partition is missing" System Restore - should let me roll back a bad driver etc as per normal in Windows, only it simply says "To use system restore you must specify which windows installation to restore. Restart this computer, select an operating system, and select system restore" ?!?! System Image Recovery - this seems to be offering to restore from a Windows system image, but this is deprecated in Windows 8, although you can still make one if you use the Windows 7 Backup tools, however the resultant file is too large to put on the USB stick as it's FAT formatted, and would be a massive stack of DVDs anyway. So useless. It would be nice it it would work with the custom recovery image you can use with the refresh command, but there seems no option to do this. Automatic Repair - some diagnostics, which seem useless as it happily tells me it can't fix my problem, even though I have none. Command Prompt - yay, this works! What on earth do I want to use it for... Had any of the above worked, it might be useful, but as any form of install still requires you to have the DVD, and any form of custom recovery image also requires you to have either a massive stack of DVDs or an NTFS formatted backup device in addition to the recovery drive, it sort of ruins the point. It doesn't seem rocket science. I want to create a bootable USB drive that I can refresh Windows over an existing install with, perform a clean reinstall to a bare system, or recovery a customised image with existing apps installed. If anyone can point me in a direction that allows me to make a single recovery drive do these all these things, I would appreciate it. I have a 32Gb USB3 thumb drive that I bought for this very purpose, but it's seems to be fighting to let me do anything useful. At this rate I will be making a DriveImageXML recovery stick and dumping the OS with that, which I know works, but isn't so elegant as using the proper tools..

    Read the article

  • How to create a simple adf dashboard application with EJB 3.0

    - by Rodrigues, Raphael
    In this month's Oracle Magazine, Frank Nimphius wrote a very good article about an Oracle ADF Faces dashboard application to support persistent user personalization. You can read this entire article clicking here. The idea in this article is to extend the dashboard application. My idea here is to create a similar dashboard application, but instead ADF BC model layer, I'm intending to use EJB3.0. There are just a one small trick here and I'll show you. I'm using the HR usual oracle schema. The steps are: 1. Create a ADF Fusion Application with EJB as a layer model 2. Generate the entities from table (I'm using Department and Employees only) 3. Create a new Session Bean. I called it: HRSessionEJB 4. Create a new method like that: public List getAllDepartmentsHavingEmployees(){ JpaEntityManager jpaEntityManager = (JpaEntityManager)em.getDelegate(); Query query = jpaEntityManager.createNamedQuery("Departments.allDepartmentsHavingEmployees"); JavaBeanResult.setQueryResultClass(query, AggregatedDepartment.class); return query.getResultList(); } 5. In the Departments entity, create a new native query annotation: @Entity @NamedQueries( { @NamedQuery(name = "Departments.findAll", query = "select o from Departments o") }) @NamedNativeQueries({ @NamedNativeQuery(name="Departments.allDepartmentsHavingEmployees", query = "select e.department_id, d.department_name , sum(e.salary), avg(e.salary) , max(e.salary), min(e.salary) from departments d , employees e where d.department_id = e.department_id group by e.department_id, d.department_name")}) public class Departments implements Serializable {...} 6. Create a new POJO called AggregatedDepartment: package oramag.sample.dashboard.model; import java.io.Serializable; import java.math.BigDecimal; public class AggregatedDepartment implements Serializable{ @SuppressWarnings("compatibility:5167698678781240729") private static final long serialVersionUID = 1L; private BigDecimal departmentId; private String departmentName; private BigDecimal sum; private BigDecimal avg; private BigDecimal max; private BigDecimal min; public AggregatedDepartment() { super(); } public AggregatedDepartment(BigDecimal departmentId, String departmentName, BigDecimal sum, BigDecimal avg, BigDecimal max, BigDecimal min) { super(); this.departmentId = departmentId; this.departmentName = departmentName; this.sum = sum; this.avg = avg; this.max = max; this.min = min; } public void setDepartmentId(BigDecimal departmentId) { this.departmentId = departmentId; } public BigDecimal getDepartmentId() { return departmentId; } public void setDepartmentName(String departmentName) { this.departmentName = departmentName; } public String getDepartmentName() { return departmentName; } public void setSum(BigDecimal sum) { this.sum = sum; } public BigDecimal getSum() { return sum; } public void setAvg(BigDecimal avg) { this.avg = avg; } public BigDecimal getAvg() { return avg; } public void setMax(BigDecimal max) { this.max = max; } public BigDecimal getMax() { return max; } public void setMin(BigDecimal min) { this.min = min; } public BigDecimal getMin() { return min; } } 7. Create the util java class called JavaBeanResult. The function of this class is to configure a native SQL query to return POJOs in a single line of code using the utility class. Credits: http://onpersistence.blogspot.com.br/2010/07/eclipselink-jpa-native-constructor.html package oramag.sample.dashboard.model.util; /******************************************************************************* * Copyright (c) 2010 Oracle. All rights reserved. * This program and the accompanying materials are made available under the * terms of the Eclipse Public License v1.0 and Eclipse Distribution License v. 1.0 * which accompanies this distribution. * The Eclipse Public License is available at http://www.eclipse.org/legal/epl-v10.html * and the Eclipse Distribution License is available at * http://www.eclipse.org/org/documents/edl-v10.php. * * @author shsmith ******************************************************************************/ import java.lang.reflect.Constructor; import java.lang.reflect.InvocationTargetException; import java.util.ArrayList; import java.util.List; import javax.persistence.Query; import org.eclipse.persistence.exceptions.ConversionException; import org.eclipse.persistence.internal.helper.ConversionManager; import org.eclipse.persistence.internal.sessions.AbstractRecord; import org.eclipse.persistence.internal.sessions.AbstractSession; import org.eclipse.persistence.jpa.JpaHelper; import org.eclipse.persistence.queries.DatabaseQuery; import org.eclipse.persistence.queries.QueryRedirector; import org.eclipse.persistence.sessions.Record; import org.eclipse.persistence.sessions.Session; /*** * This class is a simple query redirector that intercepts the result of a * native query and builds an instance of the specified JavaBean class from each * result row. The order of the selected columns musts match the JavaBean class * constructor arguments order. * * To configure a JavaBeanResult on a native SQL query use: * JavaBeanResult.setQueryResultClass(query, SomeBeanClass.class); * where query is either a JPA SQL Query or native EclipseLink DatabaseQuery. * * @author shsmith * */ public final class JavaBeanResult implements QueryRedirector { private static final long serialVersionUID = 3025874987115503731L; protected Class resultClass; public static void setQueryResultClass(Query query, Class resultClass) { JavaBeanResult javaBeanResult = new JavaBeanResult(resultClass); DatabaseQuery databaseQuery = JpaHelper.getDatabaseQuery(query); databaseQuery.setRedirector(javaBeanResult); } public static void setQueryResultClass(DatabaseQuery query, Class resultClass) { JavaBeanResult javaBeanResult = new JavaBeanResult(resultClass); query.setRedirector(javaBeanResult); } protected JavaBeanResult(Class resultClass) { this.resultClass = resultClass; } @SuppressWarnings("unchecked") public Object invokeQuery(DatabaseQuery query, Record arguments, Session session) { List results = new ArrayList(); try { Constructor[] constructors = resultClass.getDeclaredConstructors(); Constructor javaBeanClassConstructor = null; // (Constructor) resultClass.getDeclaredConstructors()[0]; Class[] constructorParameterTypes = null; // javaBeanClassConstructor.getParameterTypes(); List rows = (List) query.execute( (AbstractSession) session, (AbstractRecord) arguments); for (Object[] columns : rows) { boolean found = false; for (Constructor constructor : constructors) { javaBeanClassConstructor = constructor; constructorParameterTypes = javaBeanClassConstructor.getParameterTypes(); if (columns.length == constructorParameterTypes.length) { found = true; break; } // if (columns.length != constructorParameterTypes.length) { // throw new ColumnParameterNumberMismatchException( // resultClass); // } } if (!found) throw new ColumnParameterNumberMismatchException( resultClass); Object[] constructorArgs = new Object[constructorParameterTypes.length]; for (int j = 0; j < columns.length; j++) { Object columnValue = columns[j]; Class parameterType = constructorParameterTypes[j]; // convert the column value to the correct type--if possible constructorArgs[j] = ConversionManager.getDefaultManager() .convertObject(columnValue, parameterType); } results.add(javaBeanClassConstructor.newInstance(constructorArgs)); } } catch (ConversionException e) { throw new ColumnParameterMismatchException(e); } catch (IllegalArgumentException e) { throw new ColumnParameterMismatchException(e); } catch (InstantiationException e) { throw new ColumnParameterMismatchException(e); } catch (IllegalAccessException e) { throw new ColumnParameterMismatchException(e); } catch (InvocationTargetException e) { throw new ColumnParameterMismatchException(e); } return results; } public final class ColumnParameterMismatchException extends RuntimeException { private static final long serialVersionUID = 4752000720859502868L; public ColumnParameterMismatchException(Throwable t) { super( "Exception while processing query results-ensure column order matches constructor parameter order", t); } } public final class ColumnParameterNumberMismatchException extends RuntimeException { private static final long serialVersionUID = 1776794744797667755L; public ColumnParameterNumberMismatchException(Class clazz) { super( "Number of selected columns does not match number of constructor arguments for: " + clazz.getName()); } } } 8. Create the DataControl and a jsf or jspx page 9. Drag allDepartmentsHavingEmployees from DataControl and drop in your page 10. Choose Graph > Type: Bar (Normal) > any layout 11. In the wizard screen, Bars label, adds: sum, avg, max, min. In the X Axis label, adds: departmentName, and click in OK button 12. Run the page, the result is showed below: You can download the workspace here . It was using the latest jdeveloper version 11.1.2.2.

    Read the article

  • SQL SERVER – Import CSV into Database – Transferring File Content into a Database Table using CSVexpress

    - by pinaldave
    One of the most common data integration tasks I run into is a desire to move data from a file into a database table.  Generally the user is familiar with his data, the structure of the file, and the database table, but is unfamiliar with data integration tools and therefore views this task as something that is difficult.  What these users really need is a point and click approach that minimizes the learning curve for the data integration tool.  This is what CSVexpress (www.CSVexpress.com) is all about!  It is based on expressor Studio, a data integration tool I’ve been reviewing over the last several months. With CSVexpress, moving data between data sources can be as simple as providing the database connection details, describing the structure of the incoming and outgoing data and then connecting two pre-programmed operators.   There’s no need to learn the intricacies of the data integration tool or to write code.  Let’s look at an example. Suppose I have a comma separated value data file with data similar to the following, which is a listing of terminated employees that includes their hiring and termination date, department, job description, and final salary. EMP_ID,STRT_DATE,END_DATE,JOB_ID,DEPT_ID,SALARY 102,13-JAN-93,24-JUL-98 17:00,Programmer,60,"$85,000" 101,21-SEP-89,27-OCT-93 17:00,Account Representative,110,"$65,000" 103,28-OCT-93,15-MAR-97 17:00,Account Manager,110,"$75,000" 304,17-FEB-96,19-DEC-99 17:00,Marketing,20,"$45,000" 333,24-MAR-98,31-DEC-99 17:00,Data Entry Clerk,50,"$35,000" 100,17-SEP-87,17-JUN-93 17:00,Administrative Assistant,90,"$40,000" 334,24-MAR-98,31-DEC-98 17:00,Sales Representative,80,"$40,000" 400,01-JAN-99,31-DEC-99 17:00,Sales Manager,80,"$55,000" Notice the concise format used for the date values, the fact that the termination date includes both date and time information, and that the salary is clearly identified as money by the dollar sign and digit grouping.  In moving this data to a database table I want to express the dates using a format that includes the century since it’s obvious that this listing could include employees who left the company in both the 20th and 21st centuries, and I want the salary to be stored as a decimal value without the currency symbol and grouping character.  Most data integration tools would require coding within a transformation operation to effect these changes, but not expressor Studio.  Directives for these modifications are included in the description of the incoming data. Besides starting the expressor Studio tool and opening a project, the first step is to create connection artifacts, which describe to expressor where data is stored.  For this example, two connection artifacts are required: a file connection, which encapsulates the file system location of my file; and a database connection, which encapsulates the database connection information.  With expressor Studio, I use wizards to create these artifacts. First click New Connection > File Connection in the Home tab of expressor Studio’s ribbon bar, which starts the File Connection wizard.  In the first window, I enter the path to the directory that contains the input file.  Note that the file connection artifact only specifies the file system location, not the name of the file. Then I click Next and enter a meaningful name for this connection artifact; clicking Finish closes the wizard and saves the artifact. To create the Database Connection artifact, I must know the location of, or instance name, of the target database and have the credentials of an account with sufficient privileges to write to the target table.  To use expressor Studio’s features to the fullest, this account should also have the authority to create a table. I click the New Connection > Database Connection in the Home tab of expressor Studio’s ribbon bar, which starts the Database Connection wizard.  expressor Studio includes high-performance drivers for many relational database management systems, so I can simply make a selection from the “Supplied database drivers” drop down control.  If my desired RDBMS isn’t listed, I can optionally use an existing ODBC DSN by selecting the “Existing DSN” radio button. In the following window, I enter the connection details.  With Microsoft SQL Server, I may choose to use Windows Authentication rather than rather than account credentials.  After clicking Next, I enter a meaningful name for this connection artifact and clicking Finish closes the wizard and saves the artifact. Now I create a schema artifact, which describes the structure of the file data.  When expressor reads a file, all data fields are typed as strings.  In some use cases this may be exactly what is needed and there is no need to edit the schema artifact.  But in this example, editing the schema artifact will be used to specify how the data should be transformed; that is, reformat the dates to include century designations, change the employee and job ID’s to integers, and convert the salary to a decimal value. Again a wizard is used to create the schema artifact.  I click New Schema > Delimited Schema in the Home tab of expressor Studio’s ribbon bar, which starts the Database Connection wizard.  In the first window, I click Get Data from File, which then displays a listing of the file connections in the project.  When I click on the file connection I previously created, a browse window opens to this file system location; I then select the file and click Open, which imports 10 lines from the file into the wizard. I now view the file’s content and confirm that the appropriate delimiter characters are selected in the “Field Delimiter” and “Record Delimiter” drop down controls; then I click Next. Since the input file includes a header row, I can easily indicate that fields in the file should be identified through the corresponding header value by clicking “Set All Names from Selected Row. “ Alternatively, I could enter a different identifier into the Field Details > Name text box.  I click Next and enter a meaningful name for this schema artifact; clicking Finish closes the wizard and saves the artifact. Now I open the schema artifact in the schema editor.  When I first view the schema’s content, I note that the types of all attributes in the Semantic Type (the right-hand panel) are strings and that the attribute names are the same as the field names in the data file.  To change an attribute’s name and type, I highlight the attribute and click Edit in the Attributes grouping on the Schema > Edit tab of the editor’s ribbon bar.  This opens the Edit Attribute window; I can change the attribute name and select the desired type from the “Data type” drop down control.  In this example, I change the name of each attribute to the name of the corresponding database table column (EmployeeID, StartingDate, TerminationDate, JobDescription, DepartmentID, and FinalSalary).  Then for the EmployeeID and DepartmentID attributes, I select Integer as the data type, for the StartingDate and TerminationDate attributes, I select Datetime as the data type, and for the FinalSalary attribute, I select the Decimal type. But I can do much more in the schema editor.  For the datetime attributes, I can set a constraint that ensures that the data adheres to some predetermined specifications; a starting date must be later than January 1, 1980 (the date on which the company began operations) and a termination date must be earlier than 11:59 PM on December 31, 1999.  I simply select the appropriate constraint and enter the value (1980-01-01 00:00 as the starting date and 1999-12-31 11:59 as the termination date). As a last step in setting up these datetime conversions, I edit the mapping, describing the format of each datetime type in the source file. I highlight the mapping line for the StartingDate attribute and click Edit Mapping in the Mappings grouping on the Schema > Edit tab of the editor’s ribbon bar.  This opens the Edit Mapping window in which I either enter, or select, a format that describes how the datetime values are represented in the file.  Note the use of Y01 as the syntax for the year.  This syntax is the indicator to expressor Studio to derive the century by setting any year later than 01 to the 20th century and any year before 01 to the 21st century.  As each datetime value is read from the file, the year values are transformed into century and year values. For the TerminationDate attribute, my format also indicates that the datetime value includes hours and minutes. And now to the Salary attribute. I open its mapping and in the Edit Mapping window select the Currency tab and the “Use currency” check box.  This indicates that the file data will include the dollar sign (or in Europe the Pound or Euro sign), which should be removed. And on the Grouping tab, I select the “Use grouping” checkbox and enter 3 into the “Group size” text box, a comma into the “Grouping character” text box, and a decimal point into the “Decimal separator” character text box. These entries allow the string to be properly converted into a decimal value. By making these entries into the schema that describes my input file, I’ve specified how I want the data transformed prior to writing to the database table and completely removed the requirement for coding within the data integration application itself. Assembling the data integration application is simple.  Onto the canvas I drag the Read File and Write Table operators, connecting the output of the Read File operator to the input of the Write Table operator. Next, I select the Read File operator and its Properties panel opens on the right-hand side of expressor Studio.  For each property, I can select an appropriate entry from the corresponding drop down control.  Clicking on the button to the right of the “File name” text box opens the file system location specified in the file connection artifact, allowing me to select the appropriate input file.  I indicate also that the first row in the file, the header row, should be skipped, and that any record that fails one of the datetime constraints should be skipped. I then select the Write Table operator and in its Properties panel specify the database connection, normal for the “Mode,” and the “Truncate” and “Create Missing Table” options.  If my target table does not yet exist, expressor will create the table using the information encapsulated in the schema artifact assigned to the operator. The last task needed to complete the application is to create the schema artifact used by the Write Table operator.  This is extremely easy as another wizard is capable of using the schema artifact assigned to the Read Table operator to create a schema artifact for the Write Table operator.  In the Write Table Properties panel, I click the drop down control to the right of the “Schema” property and select “New Table Schema from Upstream Output…” from the drop down menu. The wizard first displays the table description and in its second screen asks me to select the database connection artifact that specifies the RDBMS in which the target table will exist.  The wizard then connects to the RDBMS and retrieves a list of database schemas from which I make a selection.  The fourth screen gives me the opportunity to fine tune the table’s description.  In this example, I set the width of the JobDescription column to a maximum of 40 characters and select money as the type of the LastSalary column.  I also provide the name for the table. This completes development of the application.  The entire application was created through the use of wizards and the required data transformations specified through simple constraints and specifications rather than through coding.  To develop this application, I only needed a basic understanding of expressor Studio, a level of expertise that can be gained by working through a few introductory tutorials.  expressor Studio is as close to a point and click data integration tool as one could want and I urge you to try this product if you have a need to move data between files or from files to database tables. Check out CSVexpress in more detail.  It offers a few basic video tutorials and a preview of expressor Studio 3.5, which will support the reading and writing of data into Salesforce.com. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

    Read the article

  • CodePlex Daily Summary for Saturday, May 08, 2010

    CodePlex Daily Summary for Saturday, May 08, 2010New ProjectsBizSpark Camp Sample Code: This sample project demonstrates best practices when developing Windows Phone 7 appliactions with Azure. **This code is meant only as a sample f...CLB Article Module: The CLB Article Module is a simple DotNetNuke Module for Article writers. This module is designed to provide a simple location for article/screenc...cvplus: a computer vision libraryDemina: Demina is a simple keyframe based 2d skeletal animation system. It's developed in C# using XNA.Expo Live: Expo LiveFeedMonster: FeedMonster is a Cross platform Really Simple Syndication reader made to allow you to easily follow updates to your favorite sites. Its made using ...GamePad to KeyBoard: GamePad to KeyBoard (GP2KB) is a small app that lets you define an associated keyboard key for each button in your XBox 360 controller. This way, y...huanhuan's project: moajfiodsafasLazyNet: Lazynet Allows users to save the proxy settings and IP addresses of wireless networks. This makes it easier for users that move a lot between diffe...mfcfetionapi: mfcfetionapiMocking BizTalk: Mocking BizTalk is a set of tools aimed at bringing Mock Object concepts in BizTalk solution testing. Actually it consists in a set of MockPipelin...nkSWFControl: nkSWFControl is a ASP.NET control that provides numberous ways for publishing SWF movies in your pages. The project goal is to become defacto ...Property Pack for EPiServer CMS: With EPiServer CMS 6 it's possible to create a wide variety of custom property types that have customized settings in each usage. This Property Pac...SPRoleAssignment: SPRoleAssignment makes it easier for programmers to assign custom item level permissions. You can now easily grant or remove permissions to certain...Thats-Me Dot Net API: Thats-Me Dot Net API is a library which implements the Thats-Me.ch API for the Dot Net Framework.The Information Literacy Education Learning Environment (ILE): Written in C# utilizing the .net framework the Information Literacy Education (ILE) learning environment is designed to deliver information litera...tinytian: Tools, shared.Unidecode Sharp: UnidecodeSharp is a C# port of Python and Perl Unidecode module. Intended to transliterate an Unicode object into an ASCII string, no matter what l...Wave 4: Wave 4 is a platform for professional bloggers, integrated with many social networking services.New ReleasesµManager for MaNGOS: 0.8.6: Improvements: Supports up to MaNGOS revision 9692 (may support higher revisions, this is dependent on any changes made to the database structure b...BFBC2 PRoCon: PRoCon 0.3.5.0: Release Notes CommingBizSpark Camp Sample Code: Initial Check-in: There are two downloads available for this project. There is a windows phone 7 application that calls webservices hosted in Azure. And there is a...Bojinx: Bojinx Core V4.5.11: Minor release that fixes several minor bugs and adds more error prevention logic. Fixed: You will no longer get a null pointer error when loading ...CuttingEdge.Logging: CuttingEdge.Logging v1.2.2: CuttingEdge.Logging is a library that helps the programmer output log statements to a variety of output targets in .NET applications. The design is...DotNetNuke® Events: 05.01.00 Beta 1: Please take note: this is a Beta releaseThis is a not a formal Release of DNN Events 05.01.00. This is a beta version, which is not extensively te...dylan.NET: dylan.NET v. 9.8: This is the latest version of dylan.NET features the new locimport statement, improved error handling and other new stuff and bug fixes.Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.0.9 beta 2 Released: Hi, This release contains the following enhancements: * New Property named ClosestPlotDistance has been implemented in Axis. It defines the d...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.5.2 beta 2 Released: Hi, This release contains the following enhancements: * New Property named ClosestPlotDistance has been implemented in Axis. It defines the d...GamePad to KeyBoard: GP2KB v0.1: First public version of GamePad to KeyBoard.Global: Version 0.1: This is the first beta stable release of this assembly. Check out the Test console app to see how some of the stuff works. EnjoyHtml Agility Pack: 1.4.0 Stable: 1.4.0 Adds some serious new features to Html Agility Pack to make it work nicer in a LINQ driven .NET World. The HtmlNodeCollection and HtmlAttribu...LazyNet: Beta Release: This is the Beta Version, All functionality has been implemented but needs further testing for bugs.Mercury Particle Engine: Mercury Particle Engine 3.1.0.0: Long overdue release of the latest version of Mercury Particle Engine, this release is changeset #66009NazTek.Extension.Clr4: NazTek.Extension.Clr4 Binary Cab: Includes bin, config, and chm filesnetDumbster: netDumbster 1.0: netDumbster release 1.0Opalis Community Releases: Workflow Examples (May 7, 2010): The Opalis team is providing some sample Workflows (policies) for customers and partners to help you get started in creating your own workflows in ...patterns & practices SharePoint Guidance: SPG2010 Drop10: SharePoint Guidance Drop Notes Microsoft patterns and practices ****************************************** ***************************************...Shake - C# Make: Shake v0.1.9: First public release including samples. Basic tasks: - MSBuild task (msbuild command line with parameters) - SVN command line client with checkout...SPRoleAssignment: Role Assigment Project [Eng]: SPRoleAssignment makes it easier for programmers to assign custom item level permissions. You can now easily grant or remove permissions to certain...SQL Server Metadata Toolkit 2008: Alpha 7 SQL Server Metadata Toolkit: The changes in this are to the Parser, and a change to handle WITH CTE's within the Analyzers. The Parser now handles CAST better, EXEC, EXECUTE, ...StackOverflow Desktop Client in C# and WPF: StackOverflow Client 0.5: Made the popup thinner, removed the extra icon and title. The questions on the popup automatically change every 5 seconds.TimeSpanExt: TimeSpanExt 1.0: This had been stuck in beta for a long time, so I'm glad to finally make the full release.Transcriber: Transcriber V0.2.0: First alpha release. See Issue Tracker for known bugs and incomplete features.Unidecode Sharp: UnidecodeSharp 0.04: First release. Tested and stable. Versions duplicates Perl and Python ones.Visual Studio 2010 AutoScroller Extension: AutoScroller v0.3: A Visual studio 2010 auto-scroller extension. Simply hold down your middle mouse button and drag the mouse in the direction you wish to scroll, fu...Visual Studio 2010 Test Case Import Utilities: V 1.0 (RC2): Work Item Migrator With the prior releases of Test Case Migrator ( Beta and RC1), it was possible to: migrate test cases (along with test steps) ...Word Add-in For Ontology Recognition: Technology Preview, Beta 2 - May 2010: This is a technology preview release of the Word Add-in for Ontology Recognition for Word. These are some of the updates included in this version:...Most Popular ProjectsWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight Toolkitpatterns & practices – Enterprise LibraryWindows Presentation Foundation (WPF)Microsoft SQL Server Community & SamplesASP.NETPHPExcelMost Active Projectspatterns & practices – Enterprise LibraryAJAX Control FrameworkRawrThe Information Literacy Education Learning Environment (ILE)Caliburn: An Application Framework for WPF and SilverlightBlogEngine.NETpatterns & practices - UnityjQuery Library for SharePoint Web ServicesNB_Store - Free DotNetNuke Ecommerce Catalog ModuleTweetSharp

    Read the article

  • Adding an Admin user to an ASP.NET MVC 4 application using a single drop-in file

    - by Jon Galloway
    I'm working on an ASP.NET MVC 4 tutorial and wanted to set it up so just dropping a file in App_Start would create a user named "Owner" and assign them to the "Administrator" role (more explanation at the end if you're interested). There are reasons why this wouldn't fit into most application scenarios: It's not efficient, as it checks for (and creates, if necessary) the user every time the app starts up The username, password, and role name are hardcoded in the app (although they could be pulled from config) Automatically creating an administrative account in code (without user interaction) could lead to obvious security issues if the user isn't informed However, with some modifications it might be more broadly useful - e.g. creating a test user with limited privileges, ensuring a required account isn't accidentally deleted, or - as in my case - setting up an account for demonstration or tutorial purposes. Challenge #1: Running on startup without requiring the user to install or configure anything I wanted to see if this could be done just by having the user drop a file into the App_Start folder and go. No copying code into Global.asax.cs, no installing addition NuGet packages, etc. That may not be the best approach - perhaps a NuGet package with a dependency on WebActivator would be better - but I wanted to see if this was possible and see if it offered the best experience. Fortunately ASP.NET 4 and later provide a PreApplicationStartMethod attribute which allows you to register a method which will run when the application starts up. You drop this attribute in your application and give it two parameters: a method name and the type that contains it. I created a static class named PreApplicationTasks with a static method named, then dropped this attribute in it: [assembly: PreApplicationStartMethod(typeof(PreApplicationTasks), "Initializer")] That's it. One small gotcha: the namespace can be a problem with assembly attributes. I decided my class didn't need a namespace. Challenge #2: Only one PreApplicationStartMethod per assembly In .NET 4, the PreApplicationStartMethod is marked as AllMultiple=false, so you can only have one PreApplicationStartMethod per assembly. This was fixed in .NET 4.5, as noted by Jon Skeet, so you can have as many PreApplicationStartMethods as you want (allowing you to keep your users waiting for the application to start indefinitely!). The WebActivator NuGet package solves the multiple instance problem if you're in .NET 4 - it registers as a PreApplicationStartMethod, then calls any methods you've indicated using [assembly: WebActivator.PreApplicationStartMethod(type, method)]. David Ebbo blogged about that here:  Light up your NuGets with startup code and WebActivator. In my scenario (bootstrapping a beginner level tutorial) I decided not to worry about this and stick with PreApplicationStartMethod. Challenge #3: PreApplicationStartMethod kicks in before configuration has been read This is by design, as Phil explains. It allows you to make changes that need to happen very early in the pipeline, well before Application_Start. That's fine in some cases, but it caused me problems when trying to add users, since the Membership Provider configuration hadn't yet been read - I got an exception stating that "Default Membership Provider could not be found." The solution here is to run code that requires configuration in a PostApplicationStart method. But how to do that? Challenge #4: Getting PostApplicationStartMethod without requiring WebActivator The WebActivator NuGet package, among other things, provides a PostApplicationStartMethod attribute. That's generally how I'd recommend running code that needs to happen after Application_Start: [assembly: WebActivator.PostApplicationStartMethod(typeof(TestLibrary.MyStartupCode), "CallMeAfterAppStart")] This works well, but I wanted to see if this would be possible without WebActivator. Hmm. Well, wait a minute - WebActivator works in .NET 4, so clearly it's registering and calling PostApplicationStartup tasks somehow. Off to the source code! Sure enough, there's even a handy comment in ActivationManager.cs which shows where PostApplicationStartup tasks are being registered: public static void Run() { if (!_hasInited) { RunPreStartMethods(); // Register our module to handle any Post Start methods. But outside of ASP.NET, just run them now if (HostingEnvironment.IsHosted) { Microsoft.Web.Infrastructure.DynamicModuleHelper.DynamicModuleUtility.RegisterModule(typeof(StartMethodCallingModule)); } else { RunPostStartMethods(); } _hasInited = true; } } Excellent. Hey, that DynamicModuleUtility seems familiar... Sure enough, K. Scott Allen mentioned it on his blog last year. This is really slick - a PreApplicationStartMethod can register a new HttpModule in code. Modules are run right after application startup, so that's a perfect time to do any startup stuff that requires configuration to be read. As K. Scott says, it's this easy: using System; using System.Web; using Microsoft.Web.Infrastructure.DynamicModuleHelper; [assembly:PreApplicationStartMethod(typeof(MyAppStart), "Start")] public class CoolModule : IHttpModule { // implementation not important // imagine something cool here } public static class MyAppStart { public static void Start() { DynamicModuleUtility.RegisterModule(typeof(CoolModule)); } } Challenge #5: Cooperating with SimpleMembership The ASP.NET MVC Internet template includes SimpleMembership. SimpleMembership is a big improvement over traditional ASP.NET Membership. For one thing, rather than forcing a database schema, it can work with your database schema. In the MVC 4 Internet template case, it uses Entity Framework Code First to define the user model. SimpleMembership bootstrap includes a call to InitializeDatabaseConnection, and I want to play nice with that. There's a new [InitializeSimpleMembership] attribute on the AccountController, which calls \Filters\InitializeSimpleMembershipAttribute.cs::OnActionExecuting(). That comment in that method that says "Ensure ASP.NET Simple Membership is initialized only once per app start" which sounds like good advice. I figured the best thing would be to call that directly: new Mvc4SampleApplication.Filters.InitializeSimpleMembershipAttribute().OnActionExecuting(null); I'm not 100% happy with this - in fact, it's my least favorite part of this solution. There are two problems - first, directly calling a method on a filter, while legal, seems odd. Worse, though, the Filter lives in the application's namespace, which means that this code no longer works well as a generic drop-in. The simplest workaround would be to duplicate the relevant SimpleMembership initialization code into my startup code, but I'd rather not. I'm interested in your suggestions here. Challenge #6: Module Init methods are called more than once When debugging, I noticed (and remembered) that the Init method may be called more than once per page request - it's run once per instance in the app pool, and an individual page request can cause multiple resource requests to the server. While SimpleMembership does have internal checks to prevent duplicate user or role entries, I'd rather not cause or handle those exceptions. So here's the standard single-use lock in the Module's init method: void IHttpModule.Init(HttpApplication context) { lock (lockObject) { if (!initialized) { //Do stuff } initialized = true; } } Putting it all together With all of that out of the way, here's the code I came up with: using Mvc4SampleApplication.Filters; using System.Web; using System.Web.Security; using WebMatrix.WebData; [assembly: PreApplicationStartMethod(typeof(PreApplicationTasks), "Initializer")] public static class PreApplicationTasks { public static void Initializer() { Microsoft.Web.Infrastructure.DynamicModuleHelper.DynamicModuleUtility .RegisterModule(typeof(UserInitializationModule)); } } public class UserInitializationModule : IHttpModule { private static bool initialized; private static object lockObject = new object(); private const string _username = "Owner"; private const string _password = "p@ssword123"; private const string _role = "Administrator"; void IHttpModule.Init(HttpApplication context) { lock (lockObject) { if (!initialized) { new InitializeSimpleMembershipAttribute().OnActionExecuting(null); if (!WebSecurity.UserExists(_username)) WebSecurity.CreateUserAndAccount(_username, _password); if (!Roles.RoleExists(_role)) Roles.CreateRole(_role); if (!Roles.IsUserInRole(_username, _role)) Roles.AddUserToRole(_username, _role); } initialized = true; } } void IHttpModule.Dispose() { } } The Verdict: Is this a good thing? Maybe. I think you'll agree that the journey was undoubtedly worthwhile, as it took us through some of the finer points of hooking into application startup, integrating with membership, and understanding why the WebActivator NuGet package is so useful Will I use this in the tutorial? I'm leaning towards no - I think a NuGet package with a dependency on WebActivator might work better: It's a little more clear what's going on Installing a NuGet package might be a little less error prone than copying a file A novice user could uninstall the package when complete It's a good introduction to NuGet, which is a good thing for beginners to see This code either requires either duplicating a little code from that filter or modifying the file to use the namespace Honestly I'm undecided at this point, but I'm glad that I can weigh the options. If you're interested: Why are you doing this? I'm updating the MVC Music Store tutorial to ASP.NET MVC 4, taking advantage of a lot of new ASP.NET MVC 4 features and trying to simplify areas that are giving people trouble. One change that addresses both needs us using the new OAuth support for membership as much as possible - it's a great new feature from an application perspective, and we get a fair amount of beginners struggling with setting up membership on a variety of database and development setups, which is a distraction from the focus of the tutorial - learning ASP.NET MVC. Side note: Thanks to some great help from Rick Anderson, we had a draft of the tutorial that was looking pretty good earlier this summer, but there were enough changes in ASP.NET MVC 4 all the way up to RTM that there's still some work to be done. It's high priority and should be out very soon. The one issue I ran into with OAuth is that we still need an Administrative user who can edit the store's inventory. I thought about a number of solutions for that - making the first user to register the admin, or the first user to use the username "Administrator" is assigned to the Administrator role - but they both ended up requiring extra code; also, I worried that people would use that code without understanding it or thinking about whether it was a good fit.

    Read the article

  • Windows XP Ubuntu Installer (version 11.10) error dialog - Permission Denied

    - by MacGyver
    When installing Ubuntu 11.10 on Windows XP (2nd option in installer), the install failed with popup. How can I fix this? Here is the contents of file "C:\Documents and Settings\Keith\Local Settings\Temp\wubi-11.10-rev241.log". I only pasted the last few lines because of the question size limit. \Temp\pyl1.tmp\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp is a valid Kubuntu CD 03-25 22:29 DEBUG Distro: does not contain C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp is a valid Kubuntu CD 03-25 22:29 DEBUG Distro: does not contain C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp is a valid Xubuntu CD 03-25 22:29 DEBUG Distro: does not contain C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp is a valid Xubuntu CD 03-25 22:29 DEBUG Distro: does not contain C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp is a valid Mythbuntu CD 03-25 22:29 DEBUG Distro: does not contain C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp is a valid Mythbuntu CD 03-25 22:29 DEBUG Distro: does not contain C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Ubuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Ubuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Kubuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Kubuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Xubuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Xubuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Mythbuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Mythbuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Ubuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Ubuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Kubuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Kubuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Xubuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Xubuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Mythbuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Mythbuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether Y:\ is a valid Ubuntu CD 03-25 22:29 INFO Distro: Found a valid CD for Ubuntu: Y:\ 03-25 22:29 INFO root: Running the installer... 03-25 22:29 INFO WinuiPage: appname=wubi, localedir=C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\translations, languages=['en_US', 'en'] 03-25 22:29 INFO WinuiPage: appname=wubi, localedir=C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\translations, languages=['en_US', 'en'] 03-25 22:29 DEBUG WinuiInstallationPage: target_drive=C:, installation_size=18000MB, distro_name=Ubuntu, language=en_US, locale=en_US.UTF-8, username=keith 03-25 22:29 INFO root: Received settings 03-25 22:29 INFO WinuiPage: appname=wubi, localedir=C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\translations, languages=['en_US', 'en'] 03-25 22:29 DEBUG TaskList: # Running tasklist... 03-25 22:29 DEBUG TaskList: ## Running select_target_dir... 03-25 22:29 INFO WindowsBackend: Installing into C:\ubuntu 03-25 22:29 DEBUG TaskList: ## Finished select_target_dir 03-25 22:29 DEBUG TaskList: ## Running create_dir_structure... 03-25 22:29 DEBUG CommonBackend: Creating dir C:\ubuntu 03-25 22:29 DEBUG CommonBackend: Creating dir C:\ubuntu\disks 03-25 22:29 DEBUG CommonBackend: Creating dir C:\ubuntu\install 03-25 22:29 DEBUG CommonBackend: Creating dir C:\ubuntu\install\boot 03-25 22:29 DEBUG CommonBackend: Creating dir C:\ubuntu\disks\boot 03-25 22:29 DEBUG CommonBackend: Creating dir C:\ubuntu\disks\boot\grub 03-25 22:29 DEBUG CommonBackend: Creating dir C:\ubuntu\install\boot\grub 03-25 22:29 DEBUG TaskList: ## Finished create_dir_structure 03-25 22:29 DEBUG TaskList: ## Running uncompress_target_dir... 03-25 22:29 DEBUG TaskList: ## Finished uncompress_target_dir 03-25 22:29 DEBUG TaskList: ## Running create_uninstaller... 03-25 22:29 DEBUG WindowsBackend: Copying uninstaller Y:\wubi.exe -> C:\ubuntu\uninstall-wubi.exe 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi UninstallString C:\ubuntu\uninstall-wubi.exe 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi InstallationDir C:\ubuntu 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi DisplayName Ubuntu 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi DisplayIcon C:\ubuntu\Ubuntu.ico 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi DisplayVersion 11.10-rev241 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi Publisher Ubuntu 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi URLInfoAbout http://www.ubuntu.com 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi HelpLink http://www.ubuntu.com/support 03-25 22:29 DEBUG TaskList: ## Finished create_uninstaller 03-25 22:29 DEBUG TaskList: ## Running copy_installation_files... 03-25 22:29 DEBUG WindowsBackend: Copying C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\data\custom-installation -> C:\ubuntu\install\custom-installation 03-25 22:29 DEBUG WindowsBackend: Copying C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\winboot -> C:\ubuntu\winboot 03-25 22:29 DEBUG WindowsBackend: Copying C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\data\images\Ubuntu.ico -> C:\ubuntu\Ubuntu.ico 03-25 22:29 DEBUG TaskList: ## Finished copy_installation_files 03-25 22:29 DEBUG TaskList: ## Running get_iso... 03-25 22:29 DEBUG TaskList: New task copy_file 03-25 22:29 DEBUG TaskList: ### Running copy_file... 03-25 22:32 ERROR TaskList: [Errno 13] Permission denied Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\utils.py", line 202, in copy_file IOError: [Errno 13] Permission denied 03-25 22:32 DEBUG TaskList: # Cancelling tasklist 03-25 22:32 DEBUG TaskList: New task check_iso 03-25 22:32 ERROR root: [Errno 13] Permission denied Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 130, in select_task File "\lib\wubi\application.py", line 205, in run_cd_menu File "\lib\wubi\application.py", line 120, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\utils.py", line 202, in copy_file IOError: [Errno 13] Permission denied 03-25 22:32 ERROR TaskList: 'WindowsBackend' object has no attribute 'iso_path' Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\backend.py", line 579, in get_iso File "\lib\wubi\backends\common\backend.py", line 565, in use_iso AttributeError: 'WindowsBackend' object has no attribute 'iso_path' 03-25 22:32 DEBUG TaskList: # Cancelling tasklist 03-25 22:32 DEBUG TaskList: # Finished tasklist

    Read the article

  • CodePlex Daily Summary for Friday, October 04, 2013

    CodePlex Daily Summary for Friday, October 04, 2013Popular ReleasesMoreTerra (Terraria World Viewer): Version 1.11: Release Notes Release 1.11 =========== =Bug Fixes= =========== Now works with Terraria 1.2 wld files. =============== =Known Issues= =============== Not all tiles and items are accounted for. Missing tiles just show up as pink. This is actively being worked on but wanted to get a build out that works with 1.2VG-Ripper & PG-Ripper: PG-Ripper 1.4.19: NEW: Added Option to login as Guest NEW: Added Support for "ImageTeam.org linksStyleMVVM: 3.1.4: This release has virtually no code change but adds multiple new Item templates for the Windows Phone 8 platformSystem Center Orchestrator Community Project: Orchestrator Visio and Word Generator 1.5: This tool lets you export Orchestrator runbooks as a Visio diagram, and you can also generate an optional Word file as well. Components exported as of v1.5 are : - Title of the runbook - Activities and their names/thumbnails/description (description is displayed as a callout in the Visio diagram, attached to the shape of the activity) - Links and their names/colors - Looping and their interval Thumbnails and activities are grouped in the Visio diagram, for easy manipulation of the diagra...State of Decay Save Manager: Version 1.0.4: Add version at bottom of formDNN® Form and List: DNN Form and List 06.00.07: DotNetNuke Form and List 06.00.06 Changes to 6.0.7•Fixed an error in datatypes.config that caused calculated fields to be missing in 6.0.6 Changes to 6.0.6•Add in Sql to remove 'text on row' setting for UserDefinedTable to make SQL Azure compatible. •Add new azureCompatible element to manifest. •Added a fix for importing templates. Changes to 6.0.2•Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 •Change: Data is now stored in nvarchar(max) instead of ntext C...SimpleExcelReportMaker: Serm 0.03: SourceCode and Sample .Net Framework 3.5 AnyCPU compile.RDFSharp - Start playing with RDF!: RDFSharp-0.6.6: GENERAL (NEW) Introduction of INT64 hashing engine (codenamed "Greta"); QUERY (FIX) Incorrect query evaluation due to faulty detection of optional patterns (v0.6.5 regression); (FIX) Missing update of PatternGroupID information after adding patterns and filters to a pattern group; (FIX) Ensure Context information of a pattern is not null before trying to collect it as variable; (MISC) Changed semantics of Context information of a pattern: if not provided, it will be ignored; (MISC...Application Architecture Guidelines: App Architecture Guidelines 3.0.8: This document is an overview of software qualities, principles, patterns, practices, tools and libraries.C# Intellisense for Notepad++: Release v1.0.7.2: - smart indentation - document formatting To avoid the DLLs getting locked by OS use MSI file for the installation.BlackJumboDog: Ver5.9.6: 2013.09.30 Ver5.9.6 (1)SMTP???????、???????????????? (2)WinAPI??????? (3)Web???????CGI???????????????????????Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.2: Mostly internal code tweaks. added -nosize switch to turn off the size- and gzip-calculations done after minification. removed the comments in the build targets script for the old AjaxMin build task (discussion #458831). Fixed an issue with extended Unicode characters encoded inside a string literal with adjacent \uHHHH\uHHHH sequences. Fixed an IndexOutOfRange exception when encountering a CSS identifier that's a single underscore character (_). In previous builds, the net35 and net20...AJAX Control Toolkit: September 2013 Release: AJAX Control Toolkit Release Notes - September 2013 Release (Updated) Version 7.1002September 2013 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Important UpdateThis release has been updated to fix two issues: Upda...WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.4.apifix-alpha: WDTVHubGen.v2.1.4.apifix-alpha is for testers to figure out if we got the NEW api plugged in ok. thanksVisual Log Parser: VisualLogParser: Portable Visual Log Parser for Dotnet 4.0AudioWordsDownloader: AudioWordsDownloader 1.1 build 88: New features list of words (mp3 files) is available upon typing when a download path is defined list of download paths is added paths history settings added Bug fixed case mismatch in word search field fixed path not exist bug fixed when history has been used path, when filled from dialog, not stored refresh autocomplete list after path change word sought is deleted when path is changed at the end sought word list is deleted word list not refreshed download ends. word lis...Wsus Package Publisher: Release v1.3.1309.28: Fix a bug, where WPP crash when running on a computer where Windows was installed in another language than Fr, En or De, and launching the Update Creation Wizard. Fix a bug, where WPP crash if some Multi-Thread job are launch with more than 64 items. Add a button to abort "Install This Update" wizard. Allow WPP to remember which columns are shown last time. Make URL clickable on the Update Information Tab. Add a new feature, when Double-Clicking on an update, the default action exec...Tweetinvi a friendly Twitter C# API: Alpha 0.8.3.0: Version 0.8.3.0 emphasis on the FIlteredStream and ease how to manage Exceptions that can occur due to the network or any other issue you might encounter. Will be available through nuget the 29/09/2013. FilteredStream Features provided by the Twitter Stream API - Ability to track specific keywords - Ability to track specific users - Ability to track specific locations Additional features - Detect the reasons the tweet has been retrieved from the Filtered API. You have access to both the ma...WPF Extended DataGrid: WPF Extended DataGrid 2.0.0.4 binaries: Improved performance of GroupByAcDown?????: AcDown????? v4.5: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.5 ???? AcPlay????????v3.5 ????????,???????????30% ?? ???????GoodManga.net???? ?? ?????????? ?? ??Acfun?????????? ??Bilibili??????????? ?????????flvcd???????? ??SfAcg????????????? ???????????? ???????????????? ????32...New ProjectsAnalysis Services Activity Viewer 2012: This project was created from a blog post I wrote back in February 2013 http://redphoenix.me/2013/08/22/upgrade-activity-viewer-2008-to-sql-server-2012/ARYSTA SYSTEM: Notebook System A/R Sales * Sales Order * Delivery * Sales Invoice * Sales Return * A/R Credit Memo * A/R Debit Memo A/P Purchasing * Purchase Order BEWELL SYSTEM: This system is design for Bewell-C Incorporated. Project Manager: Ben Penafiel System Engineer: Jhay Camba Report Designer: William Damasco Caching IOC: Caching IOC Container This will cache any Interface return results making it really easy to introduce caching to your solution.Grupo Anclita: Trabajo Final Laboratorio 4Halcyonic Skin by HTML5-UP - for DNN: This skin was converted for use in DNN by Michael Doxsey. Original HTML template designed and built by HTML5-UP: http://html5up.net/halcyonic/ ProPro: project about other projectsS3Unlock: Unlocks S3 agents that are stuck installing.sdfsdlfsdlkj01: dsfdffsdSerendipity - Responsive Skin for DNN: This is an HTML Template by Elemis, converted for use in DNN. Elemis URL: http://elemisfreebies.com/premium-themes/ Free for personal use and ed. purposes only.SmartSystemMenu: Smart system menu for you.SP 2013 Custom MultiTenant Adminstration: This Project creates a custom SP 2013 Tenant Admin site template covering limitations of existing tenant admin site.Telephasic Skin by HTML5-UP - for DNN: This skin was converted for use in DNN by Michael Doxsey. Original HTML template designed and built by HTML5-UP: http://html5up.net/telephasic/TelerikedIn: Social web app trying to look and feel like the famous LinkedInTerra 2: Generador de personajes para el juego de rol Terra2tsydev01: TextLineUpdateVds2465 Parser: This Project is about implementing a Parser for the Vds2465 protocol. It includes parsing and generating Vds2465 telegram bytes.Your Appliances: Empresa De ElectrodomesticosZeroFour by HTML5-UP - for DNN: This skin was converted for use in DNN by Michael Doxsey. Original HTML template designed and built by HTML5-UP: http://html5up.net/zerofour.

    Read the article

  • My View on ASP.NET Web Forms versus MVC

    - by Ricardo Peres
    Introduction A lot has been said on Web Forms and MVC, but since I was recently asked about my opinion on the subject, here it is. First, I have to say that I really like both technologies and I don’t think any is going away – just remember SharePoint, which is built on top of Web Forms. I see them as complementary, targeting different needs and leveraging different skills. Let’s go through some of their differences. Rapid Application Development Rapid Application Development (RAD) is the development process by which you have an Integrated Development Environment (IDE), a visual design surface and a toolbox, and you drag components from the toolbox to the design surface and set their properties through a property inspector. It was introduced with some of the earliest Windows graphical IDEs such as Visual Basic and Delphi. With Web Forms you have RAD out of the box. Visual Studio offers a generally good (and extensible) designer for the layout of pages and web user controls. Designing a page may simply be about dragging controls from the toolbox, setting their properties and wiring up some events to event handlers, which are implemented in code behind .NET classes. Most people will be familiar with this kind of development and enjoy it. You can see what you are doing from the beginning. MVC also has designable pages – called views in MVC terminology – the problem is that they can be built using different technologies, some of which, at the moment (MVC 4) do not support RAD – Razor, for example. I believe it is just a matter of time for that to be implemented in Visual Studio, but it will mostly consist on HTML editing, and until that day comes, you have to live with source editing. Development Model Web Forms features the same development model that you are used to from Windows Forms and other similar technologies: events fired by controls and automatic persistence of their properties between postbacks. For that, it uses concepts such as view state, which some may love and others may hate, because it may be misused quite easily, but otherwise does its job well. Another fundamental concept is data binding, by which a collection of data can be fed to a control and have it render that data somehow – just thing of the GridView control. The focus is on the page, that’s where it all starts, and you can place everything in the same code behind class: data access, business logic, layout, etc. The controls take care of generating a great part of the HTML and JavaScript for you. With MVC there is no free lunch when it comes to data persistence between requests, you have to implement it yourself. As for event handling, that is at the core of MVC, in the form of controllers and action methods, you just don’t think of them as event handlers. In MVC you need to think more in HTTP terms, so action methods such as POST and GET are relevant to you, and may write actions to handle one or the other. Also of crucial importance is model binding: the way by which MVC converts your posted data into a .NET class. This is something that ASP.NET 4.5 Web Forms has introduced as well, but it is a cornerstone in MVC. MVC also has built-in validation of these .NET classes, which out of the box uses the Data Annotations API. You have full control of the generated HTML - except for that coming from the helper methods, usually small fragments - which requires a greater familiarity with the specifications. You normally rely much more on JavaScript APIs, they are even included in the Visual Studio template, that is because much less is done for you. Reuse It is difficult to accept a professional company/project that does not employ reuse. It can save a lot of time thus cutting costs significantly. Code reused in several projects matures as time goes by and helps developers learn from past experiences. ASP.NET Web Forms was built with reuse in mind, in the form of controls. Controls encapsulate functionality and are generally portable from project to project (with the notable exception of web user controls, those with an associated .ASCX markup file). ASP.NET has dozens of controls and it is very easy to develop new ones, so I believe this is a great advantage. A control can inject JavaScript code and external references as well as generate HTML an CSS. MVC on the other hand does not use controls – it is possible to use them, with some view engines like ASPX, but it is just not advisable because it breaks the flow – where do Init, Load, PreRender, etc, fit? The most similar to controls is extension methods, or helpers. They serve the same purpose – generating HTML, CSS or JavaScript – and can be reused between different projects. What differentiates them from controls is that there is no inheritance and no context – an extension method is just a static method which doesn’t know where it is being called. You also have partial views, which you can reuse in the same project, but there is no inheritance as well. This, in my view, is a weakness of MVC. Architecture Both technologies are highly extensible. I have writtenstarted writing a series of posts on ASP.NET Web Forms extensibility and will probably write another series on MVC extensibility as well. A number of scenarios are covered in any of these models, and some extensibility points apply to both, because, of course both stand upon ASP.NET. With Web Forms, if you’re like me, you start by defining you master pages, pages and controls, with some helper classes to glue everything. You may as well throw in some JavaScript, but probably you’re main work will be with plain old .NET code. The controls you define have the chance to inject JavaScript code and references, through either the ScriptManager or the page’s ClientScript object, as well as generating HTML and CSS code. The master page and page model with code behind classes offer a number of “hooks” by which you can change the normal way of things, for example, in a page you can access any control on the master page, add script or stylesheet references to its head and even change the page’s title. Also, with Web Forms, you typically have URLs in the form “/SomePath/SomePage.aspx?SomeParameter=SomeValue”, which isn’t really SEO friendly, no to mention the HTML that some controls produce, far from standards, optimization and best practices. In MVC, you also normally start by defining the master page (or layout) and views, which are the visible parts, and then define controllers on separate files. These controllers do not know anything about the views, except the names and types of the parameters that will be passed to and from them. The controller will be responsible for the data access and business logic, eventually relying on additional classes for this purpose. On a controller you only receive parameters and return a result, which may be a request for the rendering of a view, a redirection to another URL or a JSON object, to name just a few. The controller class does not know anything about the web, so you can effectively reuse it in a non-web project. This separation and the lack of programmatic access to the UI elements, makes it very difficult to implement, for example, something like SharePoint with MVC. OK, I know about Orchard, but it isn’t really a general purpose development framework, but instead, a CMS that happens to use MVC. Not having controls render HTML for you gives you in turn much more control over it – it is your responsibility to create it, which you can either consider a blessing or a curse, in the later case, you probably shouldn’t be using MVC at all. Also MVC URLs tend to be much more SEO-oriented, if you design your controllers and actions properly. Testing In a well defined architecture, you should separate business logic, data access logic and presentation logic, because these are all different things and it might even be the need to switch one implementation for another: for example, you might design a system which includes a data access layer, a business logic layer and two presentation layers, one on top of ASP.NET and the other with WPF; and the data access layer might be implemented first using NHibernate and later on switched for Entity Framework Code First. These changes are not that rare, so care should be taken in designing the system to make them possible. Web Forms are difficult to test, because it relies on event handlers which are only fired in web contexts, when a form is submitted or a page is requested. You can call them with reflection, but you have to set up a number of mocking objects first, HttpContext.Current first coming to my mind. MVC, on the other hand, makes testing controllers a breeze, so much that it even includes a template option for generating boilerplate unit test classes up from start. A well designed – from the unit test point of view - controller will receive everything it needs to work as parameters to its action methods, so you can pass whatever values you need very easily. That doesn’t mean, of course, that everything can be tested: views, for instance, are difficult to test without actually accessing the site, but MVC offers the possibility to compile views at build time, so that, at least, you know you don’t have syntax errors beforehand. Myths Some popular but unfounded myths around MVC include: You cannot use controls in MVC: not true, actually, you can, at least with the Web Forms (ASPX) view engine; the declaration and usage is exactly the same as with Web Forms; You cannot specify a base class for a view: with the ASPX view engine you can use the Inherits Page directive, with this and all the others you can use the pageBaseType and userControlBaseType attributes of the <page> element; MVC shields you from doing “bad things” on your views: well, you can place any code on a code block, at least with the ASPX view engine (you may be starting to see a pattern here), even data access code; The model is the entity model, tied to an O/RM: the model is actually any class that you use to pass values to a view, including (but generally not recommended) an entity model; Unit tests come with no cost: unit tests generally don’t cover the UI, although there are frameworks just for that (see WatiN, for example); also, for some tests, you will have to mock or replace either the HttpContext.Current property or the HttpContextBase class yourself; Everything is testable: views aren’t, without accessing the site; MVC relies on HTML5/some_cool_new_javascript_framework: there is no relation whatsoever, MVC renders whatever you want it to render and does not require any framework to be present. The thing is, the subsequent releases of MVC happened in a time when Microsoft has become much more involved in standards, so the files and technologies included in the Visual Studio templates reflect this, and it just happens to work well with jQuery, for example. Conclusion Well, this is how I see it. Some folks may think that I am being too rude on MVC, probably because I don’t like it, but that’s not true: like I said, I do like MVC and I am starting my new projects with it. I just don’t want to go along with that those that say that MVC is much superior to Web Forms, in fact, some things you can do much more easily with Web Forms than with MVC. I will be more than happy to hear what you think on this!

    Read the article

  • Feedback on IE9 developer tool

    - by anirudha
    if you already love IE9 this post really not for you. but still you need something more this post for you and want to know about IE9 why not use product guide they give you IE9 product guide well i already put the bad experience into many post here but a little practice more to show what IE9 actually is or what they show. well i believe that their is no one on MSDN can sure that IE9 is another thing for developer to struggle with. because they never thing about the thing they make. the thinking they have that we product windows who are best so everything we do are best and best. come to the point i means Web browsing we can divide them in two parts 1. someone who are developer and use browser mainly for development , debugging and testing what they produced and make better software. 2. user who are not know things more technically but use the web as their passion. so as a developer what developer want. are IE9 is really for developer now make a comparison. commonly every developer have a twitter account to follow the link of someone else to learn and read the best article on web and share to all follower of themselves. chrome and Firefox have many utilities for that but IE still have nothing. social networking is a good way to communicate with others. in IE their is no plug-in to make experience better as firefox and chrome have a list of plug-in to use browser with more comfort. their are a huge list of plug-in on Firefox and chrome is available for making experience better. but IE9 still have no plug-in for that. if you see http://ieaddons.com/ you still see that they are joking yeah white joke who believe on them. they still have no plug-in. are they fool or making other fool. on 2011 whenever Firefox and chrome claim many thing on the plug-in IE9 still have no plug-in. not for developer not for everyone else. yeah a list of useless stuff you can see their. IE9 developer tool maybe better if they copycat the firebug as they copycat Google’s search result for Bing. well it’ not sure but Google claim that. but what is in IE9 developer tool so great that MSDN developer talking about. i found nothing in IE9 developer tool still feel frustrated their is a big trouble to edit css. means you never can change the css without going to CSS tab. but i thing great many thing they make better their but they still produce not better option in IE9 developer tool. as a comparison firebug is great we all know but chrome is a good option if someone want to try their hands on new things. in firebug their is a list of plugin inside firebug available also to make task easier. like firepicker in firebug make colorpicking easier. firebug autocomplete make console script writing better and yslow show you the performance step you need to take for making site better. IE9 still have no plugin or that. IE9 maybe useful stuff whenever the interface they thing to make better. the problem with MSFT these days that they want to ship next version of every softare in WPF. yeah they make live 2011 in wpf. many of user go for someone else or downgrade their 2011 live. the problem they have that they never want to spent the time on learning to use a software again. IE9 not have the serius problem like live have but still IE9 is not so great as chrome. like in chrome their is smooth tabbing. IE9 ditto copycat the things for tabbing. but a little step more in IE have a problem that IE9 tab slip whenever you want to use them. in chrome never slip the tab without user want. well as user someone also want to paint their browser in the style they want or like. in firefox the sollution called personas or themes. same in chrome the things called themes but in IE they still believe that their is no need for them. means use same themes everytime no customization in 2011 yeah great joke. well i read a post [written in 2008] of developer who still claim that they never used Firefox because they have a license for visual studio and some other software and have IE in their system. i not what they want to show. means they always want or thing to show that firefox and chrome is pity and IE is great as all do. but what’s true we all know. when MSFT release IE9 RC they show the ads with comparison of IE9 RC with chrome6 but why not today with chrome 11 developer version. the many things on IE testdrive now work perfect on chrome. well what’s performance matter when a silly browser never give a better experience. yeah performance have matter in useful software. anyone can prove many things whenever they produce a featureless software. well IE9 is looking great in blogger’s post on many kind of website where developer not independently write. actually they are mentally forced to write for IE9 better and show blah blah even blah is very small as they show. i am not believe on some blogger when they write in a style who are easily known that the post in favor of IE9. if you thing of mine then i am not want to hide myself i am one of the lover of open source so i love Firefox and chrome both. but i am not wrong you find yourself that what is difference between IE9 and Firefox and chrome. so don’t believe on someone who are not mentally independent because most of them are write about IE9 because they want to show them better they are forced themselves to show IE9 as a tool and chrome and firefox as pity. well read everything but never believe on everyone without any confident of them. they actually all want to show the things they have as i have with chrome and firefox is better then IE9. so my feedback on IE9 is :- without any plugin , customization or many thing i described in the post make no sense of use of IE9. i still fall in love of firefox and chrome they both give a better support and things to make experience better on the web. so conclusion is that i not forced you to other not IE9. you need to use the tool who save your time. means if your IE9 save your time you should use them because time was more subjective then others. so use the software who save the time as i save my time in chrome and in firefox. i still found nothing inIE9 who save time of mine.

    Read the article

  • Integrating Coherence & Java EE 6 Applications using ActiveCache

    - by Ricardo Ferreira
    OK, so you are a developer and are starting a new Java EE 6 application using the most wonderful features of the Java EE platform like Enterprise JavaBeans, JavaServer Faces, CDI, JPA e another cool stuff technologies. And your architecture need to hold piece of data into distributed caches to improve application's performance, scalability and reliability? If this is your current facing scenario, maybe you should look closely in the solutions provided by Oracle WebLogic Server. Oracle had integrated WebLogic Server and its champion data caching technology called Oracle Coherence. This seamless integration between this two products provides a comprehensive environment to develop applications without the complexity of extra Java code to manage cache as a dependency, since Oracle provides an DI ("Dependency Injection") mechanism for Coherence, the same DI mechanism available in standard Java EE applications. This feature is called ActiveCache. In this article, I will show you how to configure ActiveCache in WebLogic and at your Java EE application. Configuring WebLogic to manage Coherence Before you start changing your application to use Coherence, you need to configure your Coherence distributed cache. The good news is, you can manage all this stuff without writing a single line of code of XML or even Java. This configuration can be done entirely in the WebLogic administration console. The first thing to do is the setup of a Coherence cluster. A Coherence cluster is a set of Coherence JVMs configured to form one single view of the cache. This means that you can insert or remove members of the cluster without the client application (the application that generates or consume data from the cache) knows about the changes. This concept allows your solution to scale-out without changing the application server JVMs. You can growth your application only in the data grid layer. To start the configuration, you need to configure an machine that points to the server in which you want to execute the Coherence JVMs. WebLogic Server allows you to do this very easily using the Administration Console. In this example, I will call the machine as "coherence-server". Remember that in order to the machine concept works, you need to ensure that the NodeManager are being executed in the target server that the machine points to. The NodeManager executable can be found in <WLS_HOME>/server/bin/startNodeManager.sh. The next thing to do is to configure a Coherence cluster. In the WebLogic administration console, go to Environment > Coherence Clusters and click in "New". Call this Coherence cluster of "my-coherence-cluster". Click in next. Specify a valid cluster address and port. The Coherence members will communicate with each other through this address and port. Our Coherence cluster are now configured. Now it is time to configure the Coherence members and add them to this cluster. In the WebLogic administration console, go to Environment > Coherence Servers and click in "New". In the field "Name" set to "coh-server-1". In the field "Machine", associate this Coherence server to the machine "coherence-server". In the field "Cluster", associate this Coherence server to the cluster named "my-coherence-cluster". Click in "Finish". Start the Coherence server using the "Control" tab of WebLogic administration console. This will instruct WebLogic to start a new JVM of Coherence in the target machine that should join the pre-defined Coherence cluster. Configuring your Java EE Application to Access Coherence Now lets pass to the funny part of the configuration. The first thing to do is to inform your Java EE application which Coherence cluster to join. Oracle had updated WebLogic server deployment descriptors so you will not have to change your code or the containers deployment descriptors like application.xml, ejb-jar.xml or web.xml. In this example, I will show you how to enable DI ("Dependency Injection") to a Coherence cache from a Servlet 3.0 component. In the WEB-INF/weblogic.xml deployment descriptor, put the following metadata information: <?xml version="1.0" encoding="UTF-8"?> <wls:weblogic-web-app xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.4/weblogic-web-app.xsd"> <wls:context-root>myWebApp</wls:context-root> <wls:coherence-cluster-ref> <wls:coherence-cluster-name>my-coherence-cluster</wls:coherence-cluster-name> </wls:coherence-cluster-ref> </wls:weblogic-web-app> As you can see, using the "coherence-cluster-name" tag, we are informing our Java EE application that it should join the "my-coherence-cluster" when it loads in the web container. Without this information, the application will not be able to access the predefined Coherence cluster. It will form its own Coherence cluster without any members. So never forget to put this information. Now put the coherence.jar and active-cache-1.0.jar dependencies at your WEB-INF/lib application classpath. You need to deploy this dependencies so ActiveCache can automatically take care of the Coherence cluster join phase. This dependencies can be found in the following locations: - <WLS_HOME>/common/deployable-libraries/active-cache-1.0.jar - <COHERENCE_HOME>/lib/coherence.jar Finally, you need to write down the access code to the Coherence cache at your Servlet. In the following example, we have a Servlet 3.0 component that access a Coherence cache named "transactions" and prints into the browser output the content (the ammount property) of one specific transaction. package com.oracle.coherence.demo.activecache; import java.io.IOException; import javax.annotation.Resource; import javax.servlet.ServletException; import javax.servlet.annotation.WebServlet; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import com.tangosol.net.NamedCache; @WebServlet("/demo/specificTransaction") public class TransactionServletExample extends HttpServlet { @Resource(mappedName = "transactions") NamedCache transactions; protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { int transId = Integer.parseInt(request.getParameter("transId")); Transaction transaction = (Transaction) transactions.get(transId); response.getWriter().println("<center>" + transaction.getAmmount() + "</center>"); } } Thats it! No more configuration is necessary and you have all set to start producing and getting data to/from Coherence. As you can see in the example code, the Coherence cache are treated as a normal dependency in the Java EE container. The magic happens behind the scenes when the ActiveCache allows your application to join the defined Coherence cluster. The most interesting thing about this approach is, no matter which type of Coherence cache your are using (Distributed, Partitioned, Replicated, WAN-Remote) for the client application, it is just a simple attribute member of com.tangosol.net.NamedCache type. And its all managed by the Java EE container as an dependency. This means that if you inject the same dependency (the Coherence cache named "transactions") in another Java EE component (JSF managed-bean, Stateless EJB) the cache will be the same. Cool isn't it? Thanks to the CDI technology, we can extend the same support for non-Java EE standards components like simple POJOs. This means that you are not forced to only use Servlets, EJBs or JSF in order to inject Coherence caches. You can do the same approach for regular POJOs created for you and managed by lightweight containers like Spring or Seam.

    Read the article

  • Thank You for a Great Welcome for Oracle GoldenGate 11g Release 2

    - by Irem Radzik
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Yesterday morning we had two launch webcasts for Oracle GoldenGate 11g Release 2. I had the pleasure to present, as well as moderate the Q&A panels in both of these webcasts. Both events had hundreds of live attendees, sending us over 150 questions. Even though we left 30 minutes for Q&A, it was not nearly enough time to address for all the insightful questions our audience sent. Our product management team and I really appreciate the interaction we had yesterday and we are starting to respond back with outstanding questions today. Oracle GoldenGate’s new release launch also had great welcome from the media. You can find the links for various articles on the new release below: ITBusinessEdge Oracle Embraces Cross-Platform Data Integration Information Week: Oracle Real-Time Advance Taps Compressed Data Integration Developer News, Oracle GoldenGate Adds Deeper Oracle Integration, Extends Real-Time Performance CIO, Oracle GoldenGate Buddies Up with Sibling Software DBTA, Real-Time Data Integration: Oracle GoldenGate 11g Release 2 Now Available CBR Oracle unveils GoldenGate 11g Release 2 real-time data integration application In this blog, I want to address some of the frequently asked questions that came up during the webcasts. You can find the top questions and their answers along with related resources below. We will continue to address frequently asked questions via future blogs. Q: Will the new Integrated Capture for Oracle Database replace the Classic Capture? If not, which one do I use when? A: No, Classic Capture will be around for long time. Core platform specific features, bug fixes, and patches will be available for both Capture processes.Oracle Database specific features will be only available in the Integrated Capture. The Integrated Capture for Oracle Database is an option for users that need to capture data from compressed tables or need support for XML data types, XA on RAC. Users who don’t leverage these features should continue to use our Classic Capture. For more information on Oracle GoldenGate 11g Release 2 I recommend to check out the White paper: Oracle GoldenGate 11gR2 New Features as well as other technical white papers we have on OTN.                                                         For those of you coming to OpenWorld, please attend the related session: Extracting Data in Oracle GoldenGate Integrated Capture Mode, Monday Oct 1st 1:45pm Moscone South – 102 to learn more about this new feature. Q: What is new in Conflict Detection and Resolution? And how does it work? A: There are now pre-built functions to identify the conditions under which an error occurs and how to handle the record when the condition occurs. Error conditions handled include inserts into a target table where the row already exists, updates or deletes to target table rows that exist, but the original source data (before columns) do not match the existing data in the target row, and updates or deletes where the row does not exist in the target database table.Foreach of these conditions a method to handle the error is specified.  Please check out our recent blog on this topic and the White paper: Oracle GoldenGate 11gR2 New Features white paper.  Also, for those attending OpenWorld please attend the session: Best Practices for Conflict Detection and Resolution in Oracle GoldenGate for Active/Active-  Wednesday Oct 3rd  3:30pm Mascone 3000 Q: Does Oracle GoldenGate Veridata and the Management Pack require additional licenses, or is it incorporated with the GoldenGate license? A: Oracle GoldenGate Veridata and Oracle Management Pack for Oracle GoldenGate are additional products and require separate licenses. Please check out Oracle's price list here. Q: Does GoldenGate - Oracle Enterprise Manager Plug-in require additional license? A: Oracle Enterprise Manager Plug-in is included in the Oracle Management Pack for Oracle GoldenGate license, which is separate from Oracle GoldenGate license. There is no separate license for the Enterprise Manager Plug-in by itself. Oracle GoldenGate Monitor, Oracle GoldenGate Director, and Enterprise Manager Plug-in are included in the Management Pack for Oracle GoldenGate license. Please check out Management Pack for Oracle GoldenGate data sheet for more info on this product bundle. Q: Is Oracle GoldenGate replacing Oracle Streams product? A: Oracle GoldenGate is the strategic data replication product. Therefore, Oracle Streams will continue to be supported, but will not be actively enhanced. Rather, the best elements of Oracle Streams will be added to Oracle GoldenGate. Conflict management is one of them and with the latest release Oracle GoldenGate has a more advanced conflict management offering. Current customers depending on Oracle Streams will continue to be fully supported. Q: How is Oracle GoldenGate different than Oracle Data Integrator? A: Oracle Data Integrator is designed for fast bulk data movement and transformation between heterogeneous systems, while GoldenGate is designed for real-time movement of transactions between heterogeneous systems. These two products are completely complementary where GoldenGate provides low-impact real-time change data capture and delivery to a staging area on the target. And Oracle Data Integrator transforms this data and loads the DW tables. In fact, Oracle Data Integrator integrates with GoldenGate to use GoldenGate’s Capture process as one option for its CDC mechanism. We have several customers that deployed GoldenGate and ODI together to feed real-time data to their data warehousing solutions. Please also check out Oracle Data Integrator Changed Data Capture with Oracle GoldenGate Data Sheet (PDF). Thank you again very much for welcoming Oracle GoldenGate 11g Release 2 and stay in touch with us for more exciting news, updates, and events.

    Read the article

  • Silverlight Recruiting Application Part 4 - Navigation and Modules

    After our brief intermission (and the craziness of Q1 2010 release week), we're back on track here and today we get to dive into how we are going to navigate through our applications as well as how to set up our modules. That way, as I start adding the functionality- adding Jobs and Applicants, Interview Scheduling, and finally a handy Dashboard- you'll see how everything is communicating back and forth. This is all leading up to an eventual webinar, in which I'll dive into this process and give a honest look at the current story for MVVM vs. Code-Behind applications. (For a look at the future with SL4 and a little thing called MEF, check out what Ross is doing over at his blog!) Preamble... Before getting into really talking about this app, I've done a little bit of work ahead of time to create a ton of files that I'll need. Since the webinar is going to cover the Dashboard, it's not here, but otherwise this is a look at what the project layout looks like (and remember, this is both projects since they share the .Web): So as you can see, from an architecture perspective, the code-behind app is much smaller and more streamlined- aka a better fit for the one man shop that is me. Each module in the MVVM app has the same setup, which is the Module class and corresponding Views and ViewModels. Since the code-behind app doesn't need a go-between project like Infrastructure, each MVVM module is instead replaced by a single Silverlight UserControl which will contain all the logic for each respective bit of functionality. My Very First Module Navigation is going to be key to my application, so I figured the first thing I would setup is my MenuModule. First step here is creating a Silverlight Class Library named MenuModule, creatingthe View and ViewModel folders, and adding the MenuModule.cs class to handle module loading. The most important thing here is that my MenuModule inherits from IModule, which runs an Initialize on each module as it is created that, in my case, adds the views to the correct regions. Here's the MenuModule.cs code: public class MenuModule : IModule { private readonly IRegionManager regionManager; private readonly IUnityContainer container; public MenuModule(IUnityContainer container, IRegionManager regionmanager) { this.container = container; this.regionManager = regionmanager; } public void Initialize() { var addMenuView = container.Resolve<MenuView>(); regionManager.Regions["MenuRegion"].Add(addMenuView); } } Pretty straightforward here... We inject a container and region manager from Prism/Unity, then upon initialization we grab the view (out of our Views folder) and add it to the region it needs to live in. Simple, right? When the MenuView is created, the only thing in the code-behind is a reference to the set the MenuViewModel as the DataContext. I'd like to achieve MVVM nirvana and have zero code-behind by placing the viewmodel in the XAML, but for the reasons listed further below I can't. Navigation - MVVM Since navigation isn't the biggest concern in putting this whole thing together, I'm using the Button control to handle different options for loading up views/modules. There is another reason for this- out of the box, Prism has command support for buttons, which is one less custom command I had to work up for the functionality I would need. This comes from the Microsoft.Practices.Composite.Presentation assembly and looks as follows when put in code: <Button x:Name="xGoToJobs" Style="{StaticResource menuStyle}" Content="Jobs" cal:Click.Command="{Binding GoModule}" cal:Click.CommandParameter="JobPostingsView" /> For quick reference, 'menuStyle' is just taking care of margins and spacing, otherwise it looks, feels, and functions like everyone's favorite Button. What MVVM's this up is that the Click.Command is tying to a DelegateCommand (also coming fromPrism) on the backend. This setup allows you to tie user interaction to a command you setup in your viewmodel, which replaces the standard event-based setup you'd see in the code-behind app. Due to databinding magic, it all just works. When we get looking at the DelegateCommand in code, it ends up like this: public class MenuViewModel : ViewModelBase { private readonly IRegionManager regionManager; public DelegateCommand<object> GoModule { get; set; } public MenuViewModel(IRegionManager regionmanager) { this.regionManager = regionmanager; this.GoModule = new DelegateCommand<object>(this.goToView); } public void goToView(object obj) { MakeMeActive(this.regionManager, "MainRegion", obj.ToString()); } } Another for reference, ViewModelBase takes care of iNotifyPropertyChanged and MakeMeActive, which switches views in the MainRegion based on the parameters. So our public DelegateCommand GoModule ties to our command on the view, that in turn calls goToView, and the parameter on the button is the name of the view (which we pass with obj.ToString()) to activate. And how do the views get the names I can pass as a string? When I called regionManager.Regions[regionname].Add(view), there is an overload that allows for .Add(view, "viewname"), with viewname being what I use to activate views. You'll see that in action next installment, just wanted to clarify how that works. With this setup, I create two more buttons in my MenuView and the MenuModule is good to go. Last step is to make sure my MenuModule loads in my Bootstrapper: protected override IModuleCatalog GetModuleCatalog() { ModuleCatalog catalog = new ModuleCatalog(); // add modules here catalog.AddModule(typeof(MenuModule.MenuModule)); return catalog; } Clean, simple, MVVM-delicious. Navigation - Code-Behind Keeping with the history of significantly shorter code-behind sections of this series, Navigation will be no different. I promise. As I explained in a prior post, due to the one-project setup I don't have to worry about the same concerns so my menu is part of MainPage.xaml. So I can cheese-it a bit, though, since I've already got three buttons all set I'm just copying that code and adding three click-events instead of the command/commandparameter setup: <!-- Menu Region --> <StackPanel Grid.Row="1" Orientation="Vertical"> <Button x:Name="xJobsButton" Content="Jobs" Style="{StaticResource menuStyleCB}" Click="xJobsButton_Click" /> <Button x:Name="xApplicantsButton" Content="Applicants" Style="{StaticResource menuStyleCB}" Click="xApplicantsButton_Click" /> <Button x:Name="xSchedulingModule" Content="Scheduling" Style="{StaticResource menuStyleCB}" Click="xSchedulingModule_Click" /> </StackPanel> Simple, easy to use events, and no extra assemblies required! Since the code for loading each view will be similar, we'll focus on JobsView for now.The code-behind with this setup looks something like... private JobsView _jobsView; public MainPage() { InitializeComponent(); } private void xJobsButton_Click(object sender, RoutedEventArgs e) { if (MainRegion.Content.GetType() != typeof(JobsView)) { if (_jobsView == null) _jobsView = new JobsView(); MainRegion.Content = _jobsView; } } What am I doing here? First, for each 'view' I create a private reference which MainPage will hold on to. This allows for a little bit of state-maintenance when switching views. When a button is clicked, first we make sure the 'view' typeisn't active (why load it again if it is already at center stage?), then we check if the view has been created and create if necessary, then load it up. Three steps to switching views and is easy as pie. Part 4 Results The end result of all this is that I now have a menu module (MVVM) and a menu section (code-behind) that load their respective views. Since I'm using the same exact XAML (except with commands/events depending on the project), the end result for both is again exactly the same and I'll show a slightly larger image to show it off: Next time, we add the Jobs Module and wire up RadGridView and a separate edit page to handle adding and editing new jobs. That's when things get fun. And somewhere down the line, I'll make the menu look slicker. :) Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Using Lightbox with _Screen

    Although, I have to admit that I discovered Bernard Bout's ideas and concepts about implementing a lightbox in Visual FoxPro quite a while ago, there was no "spare" time in active projects that allowed me to have a closer look into his solution(s). Luckily, these days I received a demand to focus a little bit more on this. This article describes the steps about how to integrate and make use of Bernard's lightbox class in combination with _Screen in Visual FoxPro. The requirement in this project was to be able to visually lock the whole application (_Screen area) and guide the user to an information that should not be ignored easily. Depending on the importance any current user activity should be interrupted and focus put onto the notification. Getting the "meat", eh, source code Please check out Bernard's blog on Foxite directly in order to get the latest and greatest version. As time of writing this article I use version 6.0 as described in this blog entry: The Fastest Lightbox Ever The Lightbox class is sub-classed from the imgCanvas class from the GdiPlusX project on VFPx and therefore you need to have the source code of GdiPlusX as well, and integrate it into your development environment. The version I use is available here: Release GDIPlusX 1.20 As soon as you open the bbGdiLightbox class the first it, VFP might ask you to update the reference to the gdiplusx.vcx. As we have the sources, no problem and you have access to Bernard's code. The class itself is pretty easy to understand, some properties that you do not need to change and three methods: Setup(), ShowLightbox() and BeforeDraw() The challenge - _Screen or not? Reading Bernard's article about the fastest lightbox ever, he states the following: "The class will only work on a form. It will not support any other containers" Really? And what about _Screen? Isn't that a form class, too? Yes, of course it is but nonetheless trying to use _Screen directly will fail. Well, let's have look at the code to see why: WITH This .Left = 0 .Top = 0 .Height = ThisForm.Height .Width = ThisForm.Width .ZOrder(0) .Visible = .F.ENDWITH During the setup of the lightbox as well as while capturing the image as replacement for your forms and controls, the object reference Thisform is used. Which is a little bit restrictive to my opinion but let's continue. The second issue lies in the method ShowLightbox() and introduced by the call of .Bitmap.FromScreen(): Lparameters tlVisiblilty* tlVisiblilty - show or hide (T/F)* grab a screen dump with controlsIF tlVisiblilty Local loCaptureBmp As xfcBitmap Local lnTitleHeight, lnLeftBorder, lnTopBorder, lcImage, loImage lnTitleHeight = IIF(ThisForm.TitleBar = 1,Sysmetric(9),0) lnLeftBorder = IIF(ThisForm.BorderStyle < 2,0,Sysmetric(3)) lnTopBorder = IIF(ThisForm.BorderStyle < 2,0,Sysmetric(4)) With _Screen.System.Drawing loCaptureBmp = .Bitmap.FromScreen(ThisForm.HWnd,; lnLeftBorder,; lnTopBorder+lnTitleHeight,; ThisForm.Width ,; ThisForm.Height) ENDWITH * save it to a property This.capturebmp = loCaptureBmp ThisForm.SetAll("Visible",.F.) This.DraW() This.Visible = .T.ELSE ThisForm.SetAll("Visible",.T.) This.Visible = .F.ENDIF My first trials in using the class ended in an exception - GdiPlusError:OutOfMemory - thrown by the Bitmap object. Frankly speaking, this happened mainly because of my lack of knowledge about GdiPlusX. After reading some documentation, especially about the FromScreen() method I experimented a little bit. Capturing the visible area of _Screen actually was not the real problem but the dimensions I specified for the bitmap. The modifications - step by step First of all, it is to get rid of restrictive object references on Thisform and to change them into either This.Parent or more generic into This.oForm (even better: This.oControl). The Lightbox.Setup() method now sets the necessary object reference like so: *====================================================================* Initial setup* Default value: This.oControl = "This.Parent"* Alternative: This.oControl = "_Screen"*====================================================================With This .oControl = Evaluate(.oControl) If Vartype(.oControl) == T_OBJECT .Anchor = 0 .Left = 0 .Top = 0 .Width = .oControl.Width .Height = .oControl.Height .Anchor = 15 .ZOrder(0) .Visible = .F. EndIfEndwith Also, based on other developers' comments in Bernard articles on his lightbox concept and evolution I found the source code to handle the differences between a form and _Screen and goes into Lightbox.ShowLightbox() like this: *====================================================================* tlVisibility - show or hide (T/F)* grab a screen dump with controls*====================================================================Lparameters tlVisibility Local loControl m.loControl = This.oControl If m.tlVisibility Local loCaptureBmp As xfcBitmap Local lnTitleHeight, lnLeftBorder, lnTopBorder, lcImage, loImage lnTitleHeight = Iif(m.loControl.TitleBar = 1,Sysmetric(9),0) lnLeftBorder = Iif(m.loControl.BorderStyle < 2,0,Sysmetric(3)) lnTopBorder = Iif(m.loControl.BorderStyle < 2,0,Sysmetric(4)) With _Screen.System.Drawing If Upper(m.loControl.Name) == Upper("Screen") loCaptureBmp = .Bitmap.FromScreen(m.loControl.HWnd) Else loCaptureBmp = .Bitmap.FromScreen(m.loControl.HWnd,; lnLeftBorder,; lnTopBorder+lnTitleHeight,; m.loControl.Width ,; m.loControl.Height) EndIf Endwith * save it to a property This.CaptureBmp = loCaptureBmp m.loControl.SetAll("Visible",.F.) This.Draw() This.Visible = .T. Else This.CaptureBmp = .Null. m.loControl.SetAll("Visible",.T.) This.Visible = .F. Endif {loadposition content_adsense} Are we done? Almost... Although, Bernard says it clearly in his article: "Just drop the class on a form and call it as shown." It did not come clear to my mind in the first place with _Screen, but, yeah, he is right. Dropping the class on a form provides a permanent link between those two classes, it creates a valid This.Parent object reference. Bearing in mind that the lightbox class can not be "dropped" on the _Screen, we have to create the same type of binding during runtime execution like so: *====================================================================* Create global lightbox component*==================================================================== Local llOk, loException As Exception m.llOk = .F. m.loException = .Null. If Not Vartype(_Screen.Lightbox) == "O" Try _Screen.AddObject("Lightbox", "bbGdiLightbox") Catch To m.loException Assert .F. Message m.loException.Message EndTry EndIf m.llOk = (Vartype(_Screen.Lightbox) == "O")Return m.llOk Through runtime instantiation we create a valid binding to This.Parent in the lightbox object and the code works as expected with _Screen. Ease your life: Use properties instead of constants Having a closer look at the BeforeDraw() method might wet your appetite to simplify the code a little bit. Looking at the sample screenshots in Bernard's article you see several forms in different colors. This got me to modify the code like so: *====================================================================* Apply the actual lightbox effect on the captured bitmap.*====================================================================If Vartype(This.CaptureBmp) == T_OBJECT Local loGfx As xfcGraphics loGfx = This.oGfx With _Screen.System.Drawing loGfx.DrawImage(This.CaptureBmp,This.Rectangle,This.Rectangle,.GraphicsUnit.Pixel) * change the colours as needed here * possible colours are (220,128,0,0),(220,0,0,128) etc. loBrush = .SolidBrush.New(.Color.FromArgb( ; This.Opacity, .Color.FromRGB(This.BorderColor))) loGfx.FillRectangle(loBrush,This.Rectangle) EndwithEndif Create an additional property Opacity to specify the grade of translucency you would like to have without the need to change the code in each instance of the class. This way you only need to change the values of Opacity and BorderColor to tweak the appearance of your lightbox. This could be quite helpful to signalize different levels of importance (ie. green, yellow, orange, red, etc...) of notifications to the users of the application. Final thoughts Using the lightbox concept in combination with _Screen instead of forms is possible. Already Jim Wiggins comments in Bernard's article to loop through the _Screen.Forms collection in order to cascade the lightbox visibility to all active forms. Good idea. But honestly, I believe that instead of looping all forms one could use _Screen.SetAll("ShowLightbox", .T./.F., "Form") with Form.ShowLightbox_Access method to gain more speed. The modifications described above might provide even more features to your applications while consuming less resources and performance. Additionally, the restrictions to capture only forms does not exist anymore. Using _Screen you are able to capture and cover anything. The captured area of _Screen does not include any toolbars, docked windows, or menus. Therefore, it is advised to take this concept on a higher level and to combine it with additional classes that handle the state of toolbars, docked windows and menus. Which I did for the customer's project.

    Read the article

  • CodePlex Daily Summary for Saturday, March 27, 2010

    CodePlex Daily Summary for Saturday, March 27, 2010New ProjectsAlter gear SQL index Management: SQL Index management displays a list of indexes available for the chosen database and allows you to select an individual / group of indexes to be r...ASP League Ladder System: An ASP ladder / league system for online gaming league or real life leagues also.Augmented Reality Strategy Simulator: Augmented Reality Strategy Simulator is a software suite to promote computer aided strategy planning. Sports team can visualize their strategy usin...Boo syntax highlighting for Visual Studio 2010: Simple syntax hightlighting VSX add-in for Boo language in Visual Studio 2010.easySan: easySan zur einfachen Mitgliedsverwaltung im BRKFsUnit: FsUnit makes unit-testing with F# more enjoyable. It adds a special syntax to your favorite .NET testing framework.Laughing Dog XNA Framework: Laughing Dog is a simple to use, component based 2D framework for XNA game development. At present it is very early in development and as such is f...miniTodo: WPFでMVVMの練習にてきとうに作ったTODOアプリ 実用は無理です。My Common Library on .NET with CSharp: My Common Library on .NET with CSharp, it conclude database assecc, encrypt string, data caching, StringUtility, thank you for your view.Native code wrapping using c# : fsutil sparse commands: Ever thought about creating HUGE FILES for future use but felt bad for the wasted memory? Well, SPARSE FILES are the ANSWER! This FSUTIL SPARSE CO...Open SOA Platform: A centralized system for administering applications throught a SOA Enterprise Service Bus: Runtime environment (PROD, DEV, ...) , application and s...P-DBMS: Network and Database ProjectPraiseSight: PraiseSight is supposed to become a practical tool for churches to catalog an present their songs, lyrics and presentations on a beamer. The soluti...Pretty Good Frontend: Pretty Good Frontend is a sample frontend for ConfigMgr (SCCM) 2007 and MDT 2010 Zero Touch. S3Appender (Appender for Log4Net that Uses Amazon S3 For Storing Log Files): The S3Appender is a log4net appender that stores log events in either a MemoryStream or FileStream and sends them to S3 based on time intervals and...sEmit: sEmit (sms emitter) is an application written in C# which was built to send text messages. The project was founded in May 2009 by cansik. It works ...Silverlight RIA Tools: A tool set that generates a full RIA Solutions in Silverlightthommo cannon: Cannon for shooting down ThommosTianjin Polytechnic University Online Judge: Online Judge System Built on Microsoft technologies. Vision & Scope: A distributed OJ Solution on Windows and Cloud. Technologies used or planed...Tinare: Tinare is an byte encryption and decryption alogrithm. The input key is a string password.TinyPlug: Small Plugin Manager, written in C# Allows a project to define supported interfaces, and at runtime add plugins which support (inherit) these in...Utility niconv helps to convert text from one encoding to another: .NET implementation of GUN iconv console converter utility. The niconv program converts text from one encoding to another encoding. In the future r...WareFeed - Software Business Analytics: WareFeed is a simple but effective Software Business Analytics tool written in PHP and compatible others languages such as .NET, Java or Python. It...Y36API1: Semestralni projekt na Y36APINew ReleasesAlter gear SQL index Management: Setup 1.0.0: setup for first alpha releaseASP League Ladder System: ASPLeagueRelease_0_4_1: Release v 0.41Augmented Reality Strategy Simulator: Augmented Reality Strategy Simulator: Version 1.0 InstallerAutoAudit: AutoAudit 1.10e: Version 1.10e will be the final iteration of version 1 development. Version 2 will begin adding switches and options. Pleae email your suggestio...Boo syntax highlighting for Visual Studio 2010: Boo syntax VS 2010 - alpha: First release TODO: Multiline comments!Chargify.NET: Chargify.NET 0.6: Updated library, using Metered Components and updated Product information.Composer: V1.0.326.1000 Alpha: Initial Alpha release. Should be stable, with minor issues.CoNatural Components: CoNatural Components 1.6: Code fixes: Created helper classes to generate source code for type mapper/materializer. Fixed issue in optimized type materializer when loading ...CRM External View: 1.2: New Features in v1.2 release Password protected views. No more using Web Data Access role from v1. Filtering capabilities Caching for performan...Designit Video Embed Package: Release 1.1.0 beta1: You can now either have the video embeded directly in the template or have a preview in template that opens the video in a lightbox window.FsUnit: FsUnit 0.9.0 for NUnit: This release is for F# 2.0 and NUnit 2.5+.Laughing Dog XNA Framework: Laughing Dog 0.0.1: Laughing Dog - Alpla - v 0.0.1 First released version of the Laughing Dog framework.LiveUpload to Facebook: LiveUpload to Facebook 3.2: Version 3.2Become a fan on Facebook! Features Quickly and easily upload your photos and videos to Facebook, including any people tags added in Win...MapWindow6: MapWindow 6.0 msi March 26: This version adds the Join feature for creating a new "featureset" with attributes that are joined with attributes from a Excel data label named 'D...Mobile Broadband Logging Monitor: Mobile Broadband Logging Monitor 1.2.2: This edition supports: Newer and older editions of Birdstep Technology's EasyConnect HUAWEI Mobile Partner MWConn User defined location for s...Multiplayer Quiz: Release 1_6_351_0: A beta release of the next version. Please leave any errors in discussions or comments.Native code wrapping using c# : fsutil sparse commands: Fsutil sparse file native code - c sharp wrapper: Project Description A C# code wrapping a native code-Sparse files1 The code is about SPARSE files- the abillity to create huge files (for future us...Nice Libraries: 1.30 build 50325.01: Release 1.30 build 50325.01Pretty Good Frontend: Pretty Good Frontend binaries v1.0: This is the first public release of the Pretty Good Frontend binariesPylor: Pylor 0.1 alpha: This is the very first published version. I hope I can put a sample project soon.Quick Performance Monitor: Version 1.1 refresh: There was a typo or two in the sample batch file. Corrected now.Rapidshare Episode Downloader: RED v0.8.3: 0.8.1 introduced the ability to advance to the next episode. In 0.8.2 a bug was found that if episode number is less then 10, then the preceding 0...RapidWebDev - .NET Enterprise Software Development Infrastructure: RapidWebDev 1.52: RapidWebDev is an infrastructure helps to develop enterprise software solutions in Microsoft .NET easily and productively. This is the release vers...thommo cannon: game: gamethommo cannon: setup: setupthommo cannon: test: testTinare: Tinare DLL: Tinare DLL is a dynamic-link library written in C# which provides the functions to encrypt and decrypt a byte stream with tinare.WeatherBar: WeatherBar 2.1 [No Installation]: Minor changes to release 2.0 (http://weatherbar.codeplex.com/releases/view/42490). Fixed the bug that caused an exception to be thrown if the user...Most Popular ProjectsMetaSharpRawrWBFS ManagerASP.NET Ajax LibrarySilverlight ToolkitMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMost Active ProjectsRawrjQuery Library for SharePoint Web ServicesBlogEngine.NETMicrosoft Biology FoundationFarseer Physics Enginepatterns & practices: Composite WPF and SilverlightLINQ to TwitterTable2ClassFluent Ribbon Control SuiteNB_Store - Free DotNetNuke Ecommerce Catalog Module

    Read the article

  • VSFTPD Unable to set write permissions on folder

    - by Frank Astin
    I've just set up my first FTP server with VSFTPD on cent os . I can connect to it fine using a user in the group ftp-users but I get read only access . I've tried several different CHMOD codes on the folder (even 777) all to no avail . This is the tutorial I used to set up the server http://tinyurl.com/73pyuxz hopefully you'll be able to see something I missed. Thanks in advance . Requested Config File : # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd whith two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES

    Read the article

< Previous Page | 737 738 739 740 741 742 743 744 745 746 747 748  | Next Page >