Search Results

Search found 22281 results on 892 pages for 'password management'.

Page 744/892 | < Previous Page | 740 741 742 743 744 745 746 747 748 749 750 751  | Next Page >

• DVD-ROM: Pioneer DVD-115GA not being detected.

  - by Wesley

  Specs to put things in context: AMD Athlon XP 2400+ @ 2.00 GHz / 2 x 512 MB PC-3200 DDR RAM / 160 GB IDE HDD / 128 MB GeForce 6200 AGP / FIC AM37 / Windows XP Pro SP3 So this computer is actually an upgraded EMachines T2482. I found a used DVD-ROM for cheap... the Pioneer DVD-115GA. I originally had a plain DVD Reader (Lite-On XJ-HD166S) which was quite useless. So I basically did a simple swap of the drive and powered up the computer. The drive could open and close, and I put in a DVD and it was spinning, but no detection. Going into the BIOS, the drive was not detected. (The IDE cable connecting the DVD-ROM is connected to the CD-ROM below it and then attached to the secondary IDE port on the motherboard.) So I started all the way up and tried to scan for hardware changes in Computer Management. Still, nothing. I have the software downloaded from the Pioneer site, and that couldn't detect anything. So what else can I try to hopefully get my DVD-ROM recognized by the BIOS? Thanks in advance!

  Read the article

• Bypassing Router's DNS Settings

  - by Ramon Marco Navarro

  Is there a way to bypass my ISP provided CPE/router's DNS settings? I'd like to use OpenDNS but I am unable to access the administrator acount of the CPE. I tried logging in using the default passwords (admin/admin, admin/1234, etc) to no avail. I found out later that the admin password is generated using a generator where you input the CPE's MAC address. I tried emailing the manufacturer of the CPE (Huawei, the CPE is Huawei BM625) and my ISP but they aren't replying. I also saw similar queries (lots of them!) at Huawei's forums, without a single reply. So as a last resort, I'd like to know a way to bypass the CPE's DNS settings. My subscription is for a WiMAX service. I'm using Windows 7 and have already set the DNS settings for the Local Area Connection. But I still am not seeing the "You are already using OpenDNS" text at OpenDNS's site. And when explicitly using the OpenDNS servers I still seem to get 208.69.38.150 rather than the expected 208.69.38.160: nslookup www.opendns.com. 208.67.222.222 Server: resolver1.opendns.com Address: 208.67.222.222 Non-authoritative answer: Name: www.opendns.com Address: 208.69.38.150

  Read the article

• Replacing DropBox with: Amazon S3 + SSL + GPG/TrueCrypt + Mounting on OSX ??

  - by Matt Rogish

  So, right now we're using DropBox to share various data files around between approximately 10 Mac OS X systems. However, we already have an S3 account and everyone on the lowest DropBox plan of $10/mo seems too expensive. We'd like to avoid any kind of local storage (share a disk on a desktop or something) since we're a geographically distributed team). So, I am contemplating something that would allow us to replace DropBox with our own home-grown solution. We are all fairly technical people and/or smart enough to follow some steps, so if it's not as "user friendly" as DropBox we're all comfortable with that. There are plenty of docs out there that have bits and pieces of what I want but some of the tools don't seem to fit the requirements: Transport security via SSL to the bucket Encryption of bucket contents Bi-directional syncing Most of the scripts I can find on the internet use "duplicity" which appears to fail #1 (it doesn't look like duplicity supports SSL to S3 - the docs don't state but the protocol looks plain old http http://www.nongnu.org/duplicity/duplicity.1.html#sect6 ) Many scripts use gpg to encrypt files. This seems like it could work, however I have to make sure that each OSX client is able to use the same key to encrypt and decrypt files (key management is left to me to manage). FTP and other client-based apps don't seem to support this at all. Finally, most of the scripts use one-way replication, e.g. using Amazon S3 as a simple backup store. As we'd be using Amazon S3 as the "repository" they fail this one. Whew. So, I'd love a single tool that does this but after an exhaustive search I don't think one exists. In my mind, the magical tool would be some combination of TrueCrypt and rsync. I'd be happy just knowing which tools out there can fulfill my 3 requirements, after that I can stitch together the rest. Any thoughts? THANKS!

  Read the article

• Can a CNAME be a hostname

  - by pulegium

  This is bit of a theological question, but nonetheless... So, a server has a hostname, let's say the fqdn is hostname.example.com (to be really precise about what I mean, this is the name that is set in /etc/sysconfig/network). The very same server has multiple interfaces on different subnets. Let's say the IPs are 10.0.0.1 and 10.0.1.1. Now the question is, is it theoretically (mind you, this is important, I know that practically it works, but I'm interested in purely academic answer) allowed to have the following setup: interface1.example.com. IN A 10.0.0.1 interface2.example.com. IN A 10.0.1.1 hostname.example.com. IN CNAME interface1.example.com. OR should it rather be: hostname.example.com. IN A 10.0.0.1 interface2.example.com. IN A 10.0.1.1 interface1.example.com. IN CNAME hostname.example.com. I guess it's obvious which one is making more sense from the management/administration POV, but is it technically correct? The argument against the first setup is that a reverse lookup to 10.0.0.1 returns interface1.example.com and not what one might expect (ie the hostname: hostname.example.com), so the forward request and then sub sequential reverse lookups would return different results. Now, as I said, I want a theoretical answer. Links to RFC sections etc, that explicitly allows or disallows use of CNAME name as a hostname. If there's none, that's fine too, I just need to confirm. I failed to find any explicit statements so far, bar this book, where this situation is given as an example and implies that it can be done as one of the ways to avoid MX records pointing to a CNAME.

  Read the article

• postfix sasl "cannot connect to saslauthd server: No such file or directory"

  - by innotune

  I try to setup postfix with smtp authentication. I want to use /etc/shadow as my realm Unfortunately I get a "generic error" when i try to authenticate # nc localhost 25 220 mail.foo ESMTP Postfix AUTH PLAIN _base_64_encoded_user_name_and_password_ 535 5.7.8 Error: authentication failed: generic failure In the mail.warn logfile i get the following entry Oct 8 10:43:40 mail postfix/smtpd[1060]: warning: SASL authentication failure: cannot connect to saslauthd server: No such file or directory Oct 8 10:43:40 mail postfix/smtpd[1060]: warning: SASL authentication failure: Password verification failed Oct 8 10:43:40 mail postfix/smtpd[1060]: warning: _ip_: SASL PLAIN authentication failed: generic failure However the sasl setup seems to be fine $ testsaslauthd -u _user_ -p _pass_ 0: OK "Success." i added smtpd_sasl_auth_enable = yes to the main.cf This is my smtpd.conf $ cat /etc/postfix/sasl/smtpd.conf pwcheck_method: saslauthd mech_list: PLAIN LOGIN saslauthd_path: /var/run/saslauthd/mux autotransition:true I tried this conf with the last two commands and without. I'm running debian stable. How can postfix find and connect to the saslauthd server? Edit: I'm not sure whether postfix runs in a chroot The master.cf looks like this: http://pastebin.com/Fz38TcUP saslauth is located in the sbin $ which saslauthd /usr/sbin/saslauthd The EHLO has this response EHLO _server_name_ 250-_server_name_ 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN

  Read the article

• Two-way Trust relationship between Samba 3 and AD 2008 R2

  - by Romain

  Did somebody already make a two-way trust relationship between Samba 3 and AD ? I've got Samba 3.5 domain (ES02) controller and AD 2008 R2 domain (ES01) controller. Trust domain seems to be ok: Trusted domains list: ES01 S-1-5-21-1816646249-803782145-3669927669 Trusting domains list: ES01 S-1-5-21-1816646249-803782145-3669927669 I can login AD domain workstation with a Samba user account and access to AD domain workstation shares from Samba workstation with Samba user account. BUT, when I try to access to Samba domain workstation shares from AD domain workstation with AD account (test), I've got this: [2012/12/16 23:00:26.146090, 5] auth/auth.c:268(check_ntlm_password) check_ntlm_password: winbind authentication for user [test] FAILED with error NT_STATUS_NO_SUCH_USER [2012/12/16 23:00:26.146123, 2] auth/auth.c:314(check_ntlm_password) check_ntlm_password: Authentication for user [test] - [test] FAILED with error NT_STATUS_NO_SUCH_USER When I try to access samba share with the Administrator account that I create on both side with same password, I've got this: [2012/12/16 22:57:22.701841, 1] rpc_server/srv_pipe_hnd.c:1602(serverinfo_to_SamInfo_base) _netr_LogonSamLogon: user ES01\Administrator has user sid S-1-5-21-1816646249-803782145-3669927669-500 but group sid S-1-5-21-3405883886-2425668597-4100599511-513. The conflicting domain portions are not supported for NETLOGON calls I don't know if winbind is working because of this: wbinfo -u root nobody smb3user administrator "wbinfo -u" should list all local and trusted users, no ? Any fresh idea would be appreciated, I've been reading all the Internet for 1 week... Regards,

  Read the article

• Accessing network shares on Windows7 via SonicWall VPN client

  - by Jack Lloyd

  I'm running Windows7 x64 (fully patched) and the SonicWall 4.2.6.0305 client (64-bit, claims to support Windows7). I can login to the VPN and access network resources (eg SSH to a machine that lives behind the VPN). However I cannot seem to be able to access shared filesystems. Windows is refusing to do discovery on the VPN network. I suspect part of the problem is Windows persistently considers the VPN connection to be a 'public network'. Normally, you can open the network and sharing center and modify this setting, however it does not give me a choice for the VPN. So I did the expedient thing and turned on file sharing for public networks. I also disabled the Windows firewall for good measure. Still no luck. I can access the server directly by putting \\192.168.1.240 in the taskbar, which brings up the list of shares on the server. However, trying to open any of the shares simply tells me "Windows cannot access \\192.168.1.240\share You do not have permission to access ..."; it never asks for a domain password. I also tried Windows7 native VPN functionality - it couldn't successfully connect to the VPN at all. I suspect this is because SonicWall is using some obnoxious special/undocumented authentication system; I had similar problems trying to connect on Linux with the normal IPsec tools there. What magical invocation or control panel option am I missing that will let this work? Are there any reasonable debugging strategies? I'm feeling quite frustrated at Windows tendency to not give me much useful information that might let me understand what it is trying to do and what is going wrong.

  Read the article

• Jenkins: Use it with SSL / https

  - by Tim

  I have a Fedora server running Jenkins which I install via yum. Everything is okay, I can access it with http://ci.mydomain.com. But now, I want to access it with https://ci.mydomain.com, so the login with username and password is encrypted. How can I do this? Best Regards Tim Update My /etc/sysconfig/jenkins file. Starting Jenkins works, but I can not access Jenkins with the webbrowser with https://ci.mydomain.com or http://ci.mydomain.com:443, ... ## Path: Development/Jenkins ## Description: Configuration for the Jenkins continuous build server ## Type: string ## Default: "/var/lib/jenkins" ## ServiceRestart: jenkins # # Directory where Jenkins store its configuration and working # files (checkouts, build reports, artifacts, ...). # JENKINS_HOME="/var/lib/jenkins" ## Type: string ## Default: "" ## ServiceRestart: jenkins # # Java executable to run Jenkins # When left empty, we'll try to find the suitable Java. # JENKINS_JAVA_CMD="" ## Type: string ## Default: "jenkins" ## ServiceRestart: jenkins # # Unix user account that runs the Jenkins daemon # Be careful when you change this, as you need to update # permissions of $JENKINS_HOME and /var/log/jenkins. # JENKINS_USER="jenkins" ## Type: string ## Default: "-Djava.awt.headless=true" ## ServiceRestart: jenkins # # Options to pass to java when running Jenkins. # JENKINS_JAVA_OPTIONS="-Djava.awt.headless=true" ## Type: integer(0:65535) ## Default: 8080 ## ServiceRestart: jenkins # # Port Jenkins is listening on. # JENKINS_PORT="8080" ## Type: integer(1:9) ## Default: 5 ## ServiceRestart: jenkins # # Debug level for logs -- the higher the value, the more verbose. # 5 is INFO. # JENKINS_DEBUG_LEVEL="5" ## Type: yesno ## Default: no ## ServiceRestart: jenkins # # Whether to enable access logging or not. # JENKINS_ENABLE_ACCESS_LOG="no" ## Type: integer ## Default: 100 ## ServiceRestart: jenkins # # Maximum number of HTTP worker threads. # JENKINS_HANDLER_MAX="100" ## Type: integer ## Default: 20 ## ServiceRestart: jenkins # # Maximum number of idle HTTP worker threads. # JENKINS_HANDLER_IDLE="20" ## Type: string ## Default: "" ## ServiceRestart: jenkins # # Pass arbitrary arguments to Jenkins. # Full option list: java -jar jenkins.war --help # JENKINS_ARGS="--httpsPort=443 --httpsKeyStore=/root/.keystore --httpsKeyStorePassword=MYPASSWORD"

  Read the article

• How to set shmall, shmmax, shmni, etc ... in general and for postgresql

  - by jpic

  I've used the documentation from PostgreSQL to set it for example this config: >>> cat /proc/meminfo MemTotal: 16345480 kB MemFree: 1770128 kB Buffers: 382184 kB Cached: 10432632 kB SwapCached: 0 kB Active: 9228324 kB Inactive: 4621264 kB Active(anon): 7019996 kB Inactive(anon): 548528 kB Active(file): 2208328 kB Inactive(file): 4072736 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 3432 kB Writeback: 0 kB AnonPages: 3034588 kB Mapped: 4243720 kB Shmem: 4533752 kB Slab: 481728 kB SReclaimable: 440712 kB SUnreclaim: 41016 kB KernelStack: 1776 kB PageTables: 39208 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 8172740 kB Committed_AS: 14935216 kB VmallocTotal: 34359738367 kB VmallocUsed: 399340 kB VmallocChunk: 34359334908 kB HardwareCorrupted: 0 kB AnonHugePages: 456704 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 12288 kB DirectMap2M: 16680960 kB >>> ipcs -l ------ Shared Memory Limits -------- max number of segments = 4096 max seg size (kbytes) = 4316816 max total shared memory (kbytes) = 4316816 min seg size (bytes) = 1 ------ Semaphore Limits -------- max number of arrays = 128 max semaphores per array = 250 max semaphores system wide = 32000 max ops per semop call = 32 semaphore max value = 32767 ------ Messages Limits -------- max queues system wide = 31918 max size of message (bytes) = 8192 default max size of queue (bytes) = 16384 sysctl.conf extract: kernel.shmall = 1079204 kernel.shmmax = 4420419584 postgresql.conf non defaults: max_connections = 60 # (change requires restart) shared_buffers = 4GB # min 128kB work_mem = 4MB # min 64kB wal_sync_method = open_sync # the default is the first option checkpoint_segments = 16 # in logfile segments, min 1, 16MB each checkpoint_completion_target = 0.9 # checkpoint target duration, 0.0 - 1.0 effective_cache_size = 6GB Is this appropriate ? If not (or not necessarily), in which case would it be appropriate ? We did note nice performance improvements with this config, how would you improve it ? How should kernel memory management parameters be set ? Can anybody explain how to really set them from the ground up ?

  Read the article

• Problems with apache svn server (403 Forbidden)

  - by mrlanrat

  Iv recently setup a SVN server on my papache webserver. I installed USVN http://www.usvn.fr/ to help manage the repositories from a web interface. When I create a repository and try to import code into it from netbeans i get the following error: org.tigris.subversion.javahl.ClientException: RA layer request failed Server sent unexpected return value (403 Forbidden) in response to PROPFIND request for '/svn/python1' I know i have the username and password correct (and I have tried different users) I have done some research and it seems that it is most likely an Apache svn error. Below is the config file for this virtualhost. <VirtualHost *:80> ServerName svn.domain.com ServerAlias www.svn.domain.com ServerAlias admin.svn.domain.com DocumentRoot /home/mrlanrat/domains/svn.domain.com/usvn/public ErrorLog /var/log/virtualmin/svn.domain.com_error_log CustomLog /var/log/virtualmin/svn.domain.com_access_log combined DirectoryIndex index.html index.htm index.php index.php4 index.php5 <Directory "/home/mrlanrat/domains/svn.domain.com/usvn"> Options +SymLinksIfOwnerMatch AllowOverride All Order allow,deny Allow from all </Directory> <Location /svn/> ErrorDocument 404 default DAV svn Require valid-user SVNParentPath /home/mrlanrat/domains/svn.domain.com/usvn/files/svn SVNListParentPath on AuthType Basic AuthName "USVN" AuthUserFile /home/mrlanrat/domains/svn.domain.com/usvn/files/htpasswd AuthzSVNAccessFile /home/mrlanrat/domains/svn.domain.com/usvn/files/authz </Location> </VirtualHost> Can anyone point out what I may have done wrong and how to fix it? I have tested with changing file permissions and changing the configuration with no luck. Thanks in advance!

  Read the article

• ADSIEdit Cleanup After Exchange 2003 Crash During Transition To Exchange 2010

  - by ThaKidd

  Hello all. I would value some input from a few Exchange 2010 experts. I have almost completed the transition from Exchange 2003 Standard to Exchange 2010 Standard. Everything went smoothly until I tried to uninstall Exchange 2003. At that point the server bit the dust and died completely. I now have NO access to the old Exchange System Management MMC as I am running Windows 2008 SR2 and Windows 7 only. I can only fix this with ADSIEdit, EMShell, and EMConsole. I have used the 2010 shell to move/remove/verify that all mailboxes, public folders and OAB are hosted on Exchange 2010. I also verified that the routing connector has been deleted. The only two things that were not done was to remove the Recipient Update Service and actually perform the removal of the 2003 software. I have spent a lot of time going through ASDIedit and have located the old Administrative Group and the Exchange 2003 server listed under it. I also located the Recipient Update Service which includes two entries; Enterprise and my domain name. I have read that it is an unwise idea to remove the old administrative group so I won't bother messing with that. I am repeatedly getting three warnings in the Application Log. Both are from MSExchangeTransport EventID 5006 (Cannot find route to Mailbox Server OLDSERVER) and 5020 (The topology doesn't contain a route to Exchange 2000 Server or Exchange Server 2003) So my questions are: To clean out AD of the old Exchange 2003 info, can I delete the server name folder (Configuration - Services - Microsoft Exchange - ExchOrg - Administrative Groups - First Administrative Group - Servers - Old Server) and also delete the Update Recipient Service (Enterprise) and Update Recipient Service (DOMAIN) containers safely? Are there any additional items I need to address to ensure the AD is clean? Thanks in advance for your help!

  Read the article

• Can't connect to computer via SBS2011 RWA

  - by sbrattla

  I've got an SBS 2011 Essentials server. Users a able to log on to Remote Web Access using their username and password. However, the trouble starts when a users attempts to log on remotely to his/her computer from the Remote Web Access website. When the user clicks on his/her computer (in the RWA website), the user is first presented with a window listing Publisher, Type, Remote Computer name and Gateway Server. Everything seems fine here, and the user clicks Connect. The user credentials are provided, and a connection is attempted. However, the logon attempt always fails with the message "The logon attempt failed". The logon attempt always generates three log events in the server log: EventId: 4672 - Special Logon EventId: 4624 - Logon EventId: 4634 - Logoff All events happens have the same timestamp. No events are logged on the client machine which the user attempts to log on to. Others have solved this by going to their IIS server and enable "Windows Authentication" for Rpc and RpcWithCert (in Default Web Site). However, this is in place on the server. I've also got RD CAPs and RD RAPs in place. As a side note; if i try to connect to any of the machines using the Remote Desktop Connection using the "Connect from anywhere" functionality - then things work flawlessly! In other words, the error only occurs when attempting to login to a computer via the Remote Web Access website. I've run out of ideas for how I can solve this (too many hours spent). Any ideas highly appreciated!

  Read the article

• How to import certificate for Apache + LDAPS?

  - by user101956

  I am trying to get ldaps to work through Apache 2.2.17 (Windows Server 2008). If I use ldap (plain text) my configuration works great. LDAPTrustedGlobalCert CA_DER C:/wamp/certs/Trusted_Root_Certificate.cer LDAPVerifyServerCert Off <Location /> AuthLDAPBindDN "CN=corpsvcatlas,OU=Service Accounts,OU=u00958,OU=00958,DC=hca,DC=corpad,DC=net" AuthLDAPBindPassword ..removed.. AuthLDAPURL "ldaps://gc-hca.corpad.net:3269/dc=hca,dc=corpad,dc=net?sAMAccountName?sub" AuthType Basic AuthName "USE YOUR WINDOWS ACCOUNT" AuthBasicProvider ldap AuthUserFile /dev/null require valid-user </Location> I also tried the other encryption choices besides CA_DER just to be safe, with no luck. Finally, I also needed this with Apache tomcat. For tomcat I used the tomcat JRE and ran a line like this: keytool -import -trustcacerts -keystore cacerts -storepass changeit -noprompt -alias mycert -file Trusted_Root_Certificate.cer After doing the above line ldaps worked greate via tomcat. This lets me know that my certificate is a-ok. Update: Both ldap modules are turned on, since using ldap instead of ldaps works fine. When I run a git clone this is the error returned: C:\Tempgit clone http://eqb9718@localhost/git/Liferay.git Cloning into Liferay... Password: error: The requested URL returned error: 500 while accessing http://eqb9718@loca lhost/git/Liferay.git/info/refs fatal: HTTP request failed access.log has this: 127.0.0.1 - eqb9718 [23/Nov/2011:18:25:12 -0600] "GET /git/Liferay.git/info/refs service=git-upload-pack HTTP/1.1" 500 535 127.0.0.1 - eqb9718 [23/Nov/2011:18:25:33 -0600] "GET /git/Liferay.git/info/refs HTTP/1.1" 500 535 apache_error.log has nothing. Is there any more verbose logging I can turn on or better tests to do?

  Read the article

• How to use cURL to FTPS upload to SecureTransport (hint: SITE AUTH and client certificates)

  - by Seamus Abshere

  I'm trying to connect to SecureTransport 4.5.1 via FTPS using curl compiled with gnutls. You need to use --ftp-alternative-to-user "SITE AUTH" per http://curl.haxx.se/mail/lib-2006-07/0068.html Do you see anything wrong with my client certificates? I try with # mycert.crt -----BEGIN CERTIFICATE----- ... -----END CERTIFICATE----- # mykey.pem -----BEGIN RSA PRIVATE KEY----- ... -----END RSA PRIVATE KEY----- And it says "530 No client certificate presented": myuser@myserver ~ $ curl -v --ftp-ssl --cert mycert.crt --key mykey.pem --ftp-alternative-to-user "SITE AUTH" -T helloworld.txt ftp://ftp.example.com:9876/upload/ * About to connect() to ftp.example.com port 9876 (#0) * Trying 1.2.3.4... connected * Connected to ftp.example.com (1.2.3.4) port 9876 (#0) < 220 msn1 FTP server (SecureTransport 4.5.1) ready. > AUTH SSL < 334 SSLv23/TLSv1 * found 142 certificates in /etc/ssl/certs/ca-certificates.crt > USER anonymous < 331 Password required for anonymous. > PASS [email protected] < 530 Login incorrect. > SITE AUTH < 530 No client certificate presented. * Access denied: 530 * Closing connection #0 curl: (67) Access denied: 530 I also tried with a pk8 version... # openssl pkcs8 -in mykey.pem -topk8 -nocrypt > mykey.pk8 -----BEGIN CERTIFICATE----- ... -----END CERTIFICATE----- ...but got exactly the same result. What's the trick to sending a client certificate to SecureTransport?

  Read the article

• Cisco ASA Act as a Hardware Security Module?

  - by Derek

  Hello, We have a partner that is requiring us to get a HSM for a web application that we host for them. This is something new for us, we've always installed our SSL certificates on our web servers and never needed a hardware device. We currently have 2 Cisco ASA 5510 firewalls in an active/standby configuration. Both ASAs have a ASA-SSM-10 security module installed in them. The web application is a standard HTTPS webpage with no authentication required. I was wondering if we could use our Cisco ASAs to meet this requirement or if we'll have to buy another device. I was doing some searching and read about Cisco's clientless webvpn feature. It sounds like it might work, but I'm not sure. We basically want the ASA to handle the SSL and proxy the connection to our web servers. We do not want to prompt for a username or password to connect or show any portals, just display the web page. If the ASA cannot do this, does any one have any recommendations for network attached hardware security modules? We are using VMware vCenter, so we'd rather have an external device attached to the network, rather than buying HSM cards for every ESXi host. Thanks, Derek

  Read the article

• AirPort Express Discoverability

  - by andybjackson

  I bought an AirPort Express to enable music in a different part of a friend's house using the AirTunes feature. Unfortunately, iTunes or the AirPort Utility don't reliably discover the existence of the device. If I use the "Configure Other..." function within the AirPort Utility and enter the AirPort Express' IP address and password, then I can reliably get access in a daughter window to configure it. This seems to nudge the underlying AirPort Utility into "finding" and displaying the AirPort Express, which it doesn't do on its own even after clicking the "Rescan" button. iTunes then also seems to cotton on to this discovery and present the AiportExpress as an AirTunes option at the bottom right of iTunes. Things then works as we'd like them to. If I close down the AirPort Utility, then iTunes loses the AirPort Express AirTunes speaker, often giving "An unkown error (-15006) occurred while connecting to the remote speaker". Of course, starting the Airport Utility, forcing it to recognise the Airport Express and then starting iTunes, isn't the ease of use I was after. Background info: iTunes is running on Windows XP. The AirPort Express is running in wireless client mode (i.e. is connecting to an unsecured wireless network in the house with nothing connected to its ethernet port). The network router is a Swisscom Motorola 3347NWG (with firmware 7.8.5r1). I have already tried: Disabling the Windows XP firewall Updating the AirPort Express firmware, the AirPort Utility and the router firmware Ensuring Wireless privacy and similar potetnially problematic router settings are off Solutions, or even just ideas of other things to try would be gratefully received.

  Read the article

• Ubuntu Server running VNC

  - by xwapilot

  I have access to four computers: 1 Ubuntu Server desktop (Version 10.04) 1 Mac Mini (Snow Leopard) 1 Windows desktop (Windows 7) 1 Windows laptop (Windows Vista) The first three will always be on the home network. My goal is to SSH from the laptop into the server and be able, through VNC (or another remote desktop software), to control the windows and mac computers. The goal of this would be a slightly heightened network security over using VNC to directly access the mac or windows desktop. I have successfully used SSH to connect to the server, but have not been able to successfully implement the remote desktop connection. I would appreciate help doing so. Here's what I've done so far: As per instructions here: http://www.stuartellis.eu/articles/vnc-on-linux/ I installed the following: vnc4server – the main VNC server software vnc-java – enables access from Web browsers with Java support xvnc4viewer – a basic VNC viewer I then set up a password using the vncpasswd command. To attempt to connect to the mac, I followed directions I found in a thread at superuser. com and went to "System PreferencesSharing" and enabled "Screen Sharing". Subsequently, I tried entering the following commands into Ubuntu: vncviewer mac_ip_address::5904 vncviewer mac_ip_address:0 vncviewer mac_ip_address:1 They all returned the following: VNC Viewer Free Edition 4.1.1 for X - built Apr 9 2010 18:41:55 Copyright (C) 2002-2005 RealVNC Ltd. See http ://www .realvnc. com for information on VNC. vncviewer: unable to open display "" I'm sure I'm missing something important, but I'm not sure what it is. Do I need to have a GUI installed, or did that come with the vnc packages I installed?

  Read the article

• Reverse ssh tunneling with Tomato

  - by Deivuh

  Since my ISP restricts some incoming connections, I can't access remotely to my home pc. What I'm trying to do is make a reverse ssh connection from my home's router with Tomato firmware to the office computer, so I can access remotely from the office with that open connection. What I'm doing is running the following from the router: ssh -R 12345:localhost:22 oUser@office Then I leave run top open to keep the connection alive. And from my office what I do is run the following: ssh hUser@localhost -p 12345 but I get the following message with verbose on: OpenSSH_5.5p1 Debian-6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to localhost [::1] port 19999. debug1: Connection established. debug1: identity file /home/oUser/.ssh/id_rsa type -1 debug1: identity file /home/oUer/.ssh/id_rsa-cert type -1 debug1: identity file /home/oUser/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: identity file /home/oUser/.ssh/id_dsa-cert type -1 ssh_exchange_identification: Connection closed by remote host I've password remote access enabled in Tomato's configuration, so I should be able to access without having the public key on *authorized_keys*, but I've even tried adding it and still the same. I've done the same with my home's computer, and it does work perfectly, but it doesn't with the router. Am I doing something wrong? Thanks in advance.

  Read the article

• VMWare ESX, storage over 2TB

  - by Phliplip

  Hi, First of, i'm a webdeveloper and my server experience lies in setting up FreeBSD servers for webserver. I'm working on a project for at photographer, and i'm hired to develop a new online photo ordering system - where user of course can view their photos :) They have a massive need of storage, thus we have bought a HP G6 and 8x1TB SATA HDD. Our plan is to install VMWare ESX 4.0, running multiple virtual machines; FreeBSD 8 for webserver and some windows servers. Allready done that. Then mount one big storage to the BSD, and share it through Samba to the WinServers. The raid is set up with an array of 2x 1TB to handle the VMs. And the rest is setup as 3 2x1TB to handle the photo-data. Thus 2.73TB for photo-data (the raids are 1+0). Now if we add a datastore in the ESX and add the 3 LUNs we can get a datastore of 2.74TB. But i don't se how i can add this datastore direct to the VM. Only the BSD VM needs access to this. Only way is to create a VirtualDisk, with a max of 2TB (8MB blocksize). This is because the datastore where we save the virtualdisk has a maximum filesize of 2TB. Then add it as a harddisk to the BSD VM. In the 'Add Harddisk' pane for the VM, i see an option for Raw Disk Management. I think this is to access the datastore or the raid directly. Only problem is that its greyed out! Can i access the datastorage directly from the BSD? Without creating and adding virtualdisk.

  Read the article

• ASP.Net application can no longer write to DB after having run out of disk space

  - by remi.despres-smyth

  I'm a software developer troubleshooting a sticky problem on a client's production server, and I've got a bit of a problem. They have a virtual server running Windows Server 2008, SQL Server 2008 R1 and IIS7. It was provisioned with two partitions: one that has the OS (~15 Gig), and the other has IIS' web sites (another ~15 Gig). My application that's running this server has been running perfectly well, up until about an hour ago, when it started throwing System.IO.IOException: "There is not enough space on disk". As soon as my client notified me, I cleared up some space on C:\, emptied the recycle bin, and restarted SQL Server and IIS. The web server came back up and the application was running, but it no longer saves information to the database. No error message is coming up, the application can get information out of the DB, but it can no longer save data back to it. I rebooted the server, to no effect. I spoke with a sys admin at the hosting company, and he says SQL Server appears to have come up fine and the database is not in read-only mode. I confirmed that, as I can add records to tables from SQL Server Management Studio. I looked at the event log immediately after trying to save an edited record in the app, and no new events appear in there that I can tell. I'm assuming this is related to having run out of space, as it was all working fine prior to that, but I'm at a bit of a loss as to what exactly needs a kick in the pants to get going again. Can anyone help me out? What the heck is going on here?

  Read the article

• lftp cannot connecto to IIS

  - by ruyrocha

  Hello, I can not connect to IIS using lftp as you can see here: <--- 200 Language is now English, UTF-8 encoding. ---> OPTS UTF8 ON <--- 200 OPTS UTF8 command successful - UTF8 encoding now ON. ---> HOST x.x.x.x <--- 504 Server cannot accept argument. ---> USER bla <--- 331 Password required for hgtrf. ---> PASS blabla <--- 230 User logged in. ---> PWD <--- 257 "/" is current directory. ---> PBSZ 0 <--- 200 PBSZ command successful. ---> PROT P <--- 534 Policy denies SSL. ---> PASV <--- 227 Entering Passive Mode (x.x.x.x,194,118). ---- Connecting data socket to (x.x.x.x) port 49782 **** Socket error (Connection refused) - reconnecting ---> LIST ---> ABOR ---- Closing aborted data socket ---- Closing control socket I could connect, list, retrieve and send files using standard ftp command. Do you have any suggestion?

  Read the article

• Gmail: security warning icon

  - by Notetaker

  Hello, I just enabled some Gmail Labs programs in my Gmail account, and then I noticed the orange triangle icon with an exclamation mark in it at the end of the address bar of my Google Chrome browser. Clicking on it brought forth a "Security Information' dialog box, with the following messages: "--mail.google.com The identity of website has been verified by Thawlte SGC CA. --Your connection to mail.google.com is encrypted with 128-bit encryption. However, this page includes other resources which are not secure. These resources can be viewed by others while in transit, and can be modified by an attacker to change the look or behavior of the page." I then logged into two of my other Gmail accounts, one of which has no Gmail Labs programs enabled, and the other with 1 program enabled quite some time ago, both with the same result as above (i.e., with the appearance of the orange triangle warning sign in the address bar). I don't remember seeing the orange triangle before, but I'm not sure if it has ever appeared or not. I have "Always use https" enabled for my Gmail accounts. My questions are: Is there a way to identify and remove these un-secure "resources"? (Could enabling Gmail Labs programs have brought these on?) Meanwhile, are my Gmail accounts compromised and unsafe to use? If so, what should I being doing about that now? After this problem is solved, would I need to reset the password to my Gmail accounts, and/or take any other measures to restore their security? Many thanks for answering my questions!

  Read the article

• run script as another user from a root script with no tty stdin

  - by viktor tron

  Using CentOs, I want to run a script as user 'training' as a system service. I use daemontools to monitor the process, which needs a launcher script that is run as root and has no tty standard in. Below I give my four different attempts which all fail. : #!/bin/bash exec >> /var/log/training_service.log 2>&1 setuidgid training training_command This last line is not good enough since for training_command, we need environment for trqaining user to be set. : su - training -c 'training_command' This looks like it (http://serverfault.com/questions/44400/run-a-shell-script-as-a-different-user) but gives 'standard in must be tty' as su making sure tty is present to potentially accept password. I know I could make this disappear by modifying /etc/sudoers (a la http://superuser.com/questions/119376/bash-su-script-giving-an-error-standard-in-must-be-a-tty) but i am reluctant and unsure of consequences. : runuser - training -c 'training_command' This one gives runuser: cannot set groups: Connection refused. I found no sense or resolution to this error. : ssh -p100 training@localhost 'source $HOME/.bashrc; training_command' This one is more of a joke to show desparation. Even this one fails with Host key verification failed. (the host key IS in known_hosts, etc). Note: all of 2,3,4 work as they should if I run the wrapper script from a root shell. problems only occur if the system service monitor (daemontools) launches it (no tty terminal I guess). I am stuck. Is this something so hard to achieve? I appreciate all insight and guidance to best practice. (this has also been posted on superuser: http://superuser.com/questions/434235/script-calling-script-as-other-user)

  Read the article

• ASDIEdit Cleanup After Exchange 2003 Crash During Transition To Exchange 2010

  - by ThaKidd

  Hello all. I would value some input from a few experts. I have almost completed the transition from Exchange 2003 Standard to Exchange 2010 Standard. Everything went smoothly until I tried to uninstall Exchange 2003. At that point the server bit the dust and died completely. I now have NO access to the old Exchange System Management MMC as I am running Windows 2008 SR2 and Windows 7 only. I can only fix this with ASDIEdit, EMShell, and EMConsole. I have used the 2010 shell to move/remove/verify that all mailboxes, public folders and OAB are hosted on Exchange 2010. I also verified that the routing connector has been deleted. The only two things that were not done was to remove the Recipient Update Service and actually perform the removal of the 2003 software. I have spent a lot of time going through ASDIedit and have located the old Administrative Group and the Exchange 2003 server listed under it. I also located the Recipient Update Service which includes two entries; Enterprise and my domain name. I have read that it is an unwise idea to remove the old administrative group so I won't bother messing with that. I am repeatedly getting three warnings in the Application Log. Both are from MSExchangeTransport EventID 5006 (Cannot find route to Mailbox Server OLDSERVER) and 5020 (The topology doesn't contain a route to Exchange 2000 Server or Exchange Server 2003) So my questions are: To clean out AD of the old Exchange 2003 info, can I delete the server name folder (Configuration - Services - Microsoft Exchange - ExchOrg - Administrative Groups - First Administrative Group - Servers - Old Server) and also delete the Update Recipient Service (Enterprise) and Update Recipient Service (DOMAIN) containers safely? Are there any additional items I need to address to ensure the AD is clean? Thanks in advance for your help!

  Read the article

• SNMPD running but not listening for connections at random

  - by Lukasz

  OS: CentOS release 5.7 (Final) Net-SNMP: net-snmp-5.3.2.2-14.el5_7.1 (from RPM) Periodically my NMS notifies me that SNMP has gone down on this machine. The service is restored in between 10 to 30 minutes. My NMS also pings and check SSH and those services are not affected during the SNMP outage. SNMPD log file shows that it is working and apparently receiving packets (either from local agents from 127.0.0.1 or from my NMS at 172.16.37.37) however attempting to snmpwalk locally or from the NMS system fails with a timeout. I have 7 of these servers running mixture of CentOS 5.7 and RHEL 5.7 with this specific version of Net-SNMP installed from RPM - none of them have this issue except this one. 5 of the machines (including the NMS system and this problem server) are in the same rack connected using one switch. Restarting SNMPD does not fix the issue - it clears up by itself eventually. Any suggestions where I can begin diagnosing the issue? It's a closed subnet so IPTables is not used. SNMPD config below: # Following entries were added by HP Insight Management Agents at # Tue May 15 10:58:17 CLT 2012 dlmod cmaX /usr/lib64/libcmaX64.so rwcommunity public 127.0.0.1 rocommunity public 127.0.0.1 rwcommunity 3adRabRu 172.16.37.37 rocommunity 3adRabRu 172.16.37.37 rwcommunity 3adRabRu 172.16.37.36 rocommunity 3adRabRu 172.16.37.36 trapcommunity callmetraps trapsink 172.16.37.37 callmetraps trapsink 172.16.37.36 callmetraps syscontact Lukasz Piwowarek syslocation Santiago, Chile # ---------------------- END -------------------- agentAddress udp:161 com2sec rwlocal default public com2sec rolocal default public com2sec subnet default 3adRabRu group rwv2c v2c rwlocal group rov2c v2c rolocal group rov2c v2c subnet view all included .1 access rwv2c "" any noauth exact all all none access rov2c "" any noauth exact all none none

  Read the article

< Previous Page | 740 741 742 743 744 745 746 747 748 749 750 751  | Next Page >