Search Results

Search found 32299 results on 1292 pages for 'unauthorized access'.

Page 748/1292 | < Previous Page | 744 745 746 747 748 749 750 751 752 753 754 755 | Next Page >

HP ProLiant Smart Array "lock up" code 0x11

- by ewwhite

I've a ProLiant DL580 G7 server that experienced a storage subsystem failure during production. The system appeared available and responded to pings, but all I/O access stalled (the system load must have been 100+). The ASR did not trigger at the specified watchdog timeout. I had to force a reboot from the ILO. During POST, I received the following error: A controller failure event occurred prior to this power-up. (Previous lock up code = 0x11) I haven't pulled the ADU report yet, but I'm curious as to what this error actually means. I was not responsible for the the installation, but can see that the firmware is very old. But if there's anything else I should know about the error, I'd like to know for the post-mortem report. edit - I should add that the server had 95 days of uptime prior to the lock up.

Read the article
Bootstrapping in CloudFormation with Autoscale

- by PapelPincel

My CloudFormation template creates an autoscale group and bootstrap it with utility script /opt/aws/bin/cfn-init. When I remove the bootstrap part out of my template the, autoscale get created without any problem, but I add it the CloudFormation Stack fails and add line in /var/log/cloud-init.log : Error: AutoScalingGroupName does not specify any metadata The line above appens right after the following command : /opt/aws/bin/cfn-init --verbose --configsets orderedConfig --region us-east-1 --stack AS15 --resource AutoScalingGroupName --access-key XXXXXXXXXXXXX --secret-key XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Digging a little bit deeper, in cfn-init I added the following lines the point where it exit: from pprint import pprint pprint(vars(detail)) and I get the following trace when running the previous cfn-init command : {'_description': None, '_lastUpdated': datetime.datetime(2012, 7, 12, 14, 52, 42), '_logicalResourceId': u'AutoScalingGroupName', '_metadata': None, '_physicalResourceId': u'AS15-AutoScalingGroupName-HNPOXXXXXXXX', '_resourceStatus': u'CREATE_COMPLETE', '_resourceStatusReason': None, '_resourceType': u'AWS::AutoScaling::AutoScalingGroup', '_stackId': u'arn:aws:cloudformation:us-east-1:XXXXXXXXXXXXX:stack/AS15/XXXXXXXX-cc30-11e1-XXXXXX-XXXXXXXXXX', '_stackName': u'AS15'} As you can see, the metadata field is empty and that's the reason why it fails to create the stack. Is there any known side effects for cfn-init when used with autoscale ?

Read the article
Try exchange in real domain

- by AndreaCi

We (as a company) 'd like to try exchange server to replace our mail server. I downloaded the demo version from Microsoft website, but during the installation it wants administrator access to domain to edit the Active Directory database structure. The test will last for (at least) a month to see if it will bring real advantages to our management systems. Here is my question: Is it "dangerous"? If I uninstall the exchange server everything will be reverted to previous state? I'm kind of "scared" about the changes he may apply to our domain controllers.

Read the article
Apache server in raspberry PI not visible from outside( public IP)

- by Kronos

I have made a fresh install of Arch Linux ARM into a Raspberry PI and I mounted there a LAMP, all fresh. I have another Arch(x86) in my laptop with Apache also there, and as far as I know, two web servers cannot run in the same network segment so, the problem is as follows. I my laptop, having Apache running, if I enter via the public ip of my network everything turns ok and I can see my website but, (obviously turning this server down) if I enter from the public IP with the Apache running in the raspberry pi( yes, only that Apache running) i cannot see my website in there. Also, if I access via local network it is a normal success, I can see my website. So, I can enter my raspberry website only via local but in my other web server i can enter it via local and public. I have the same conf files in both of them so what is the difference? I was planning in making the rpi as a development server. Thanks in advance

Read the article
How to do hooking in Java? [closed]

- by chimpaburro

A hook is a process running to get data from another (more info), well the case was that I wanted to get the methods or functions using any application for access to a network, these methods are usually WSAConnect (), WSASendTo (), bind (), connect () and sendto () [these are the ones that need to get to the application]. I started testing, creating Runtime [Runtime.getRuntime (). exec (...)] with all possible methods [addShutdownHook (...);] and now I'm trying to ProcessBuilder [new ProcessBuilder (...);] and the famous BufferedReader [new BufferedReader (new InputStreamReader (proceso.getInputStream ()));] but I could not find the way to do it. Sorry for my bad English..

Read the article
Using group policy preferences to push a file to C:\Windows on a restricted user.

- by Fireshot

We have a really old Video learning program that we need to run from the network for our students. However it uses Director Player 6.0 and the students get the error: "Unable to copy the driver file C:\Windows\xobglu16.dll to your Windows directory. Your disk may be full" Now the solution I've read is to copy the files manually to each machine and mark them read-only. I'm trying to do this via GPP, but the Event log is showing an Access is denied error. I believe it is because the student accounts do not have permission to c:\windows. Any ideas on a work around without using a script?

Read the article
"Failed to delete the item from the trash" on network drive files

- by bstpierre

How does the Ubuntu trash work? It appears that one trash bin is used by many drives. I've noticed a folder called ".Trash-1000" on my network drive as well as "/home/user/.local/share/Trash". Currently I have a problem where a number of files I deleted from a network drive (which I no longer have full access to) appear in my trash but but cannot be deleted, I see the error "Failed to delete the item from the trash". If I look at the files in this network drive trash I notice that it contains all of these undeletable files. I am running Ubuntu 9.10 x64.

Read the article
Can i safely block all ports on my sever

- by Saif Bechan

I have a web server running pleks and get attacked a lot every day. I configured a firewall, and there are some predefined services such as www, and ftp, etc. I am planning to block all the ports except for the www port and the PLESK port. When I need ftp or ssh access for example i will open the ports in PLESK and then start to work. Is this a good thing to do or are there some downsides on doing this. There are some ports I am not sure of, such as SMTP,POP3,IMAP, DNS. Can i close these ports or is there no need to do so.

Read the article
How do I set up DNS for an intranet web site?

- by BradyKelly

I have a web site running on our local server, 'OBAMA'. In my hosts file on that server, I map engenxt.local to 127.0.0.1, so typing engenxt.local on that machine itself brings up the website. I would like other machines to access the site via domain name 'engenxt'. On a Windows Server 2008 R2 Standard server, where would I begin, where should I go, and where should I end? I know precious little about DNS, or rather precious nothing, but am a quick study, besides, that is why I'm asking how to do this here. Episode 2 When I run DNS as Ryan suggests, it says 'the server OBAMA is unavailable. Do I want to add it?' It adds it, and tells me to choose to 'Configure a DNS server' from the actions menu, but nearly all the actions in that menu are disabled.

Read the article
forwarding port 3306 on macosx in order to connect to a remote mysql db

- by Jonathan Mayhak

I'm on macosx 10.6.2 trying to connect to ubuntu server 8.04.1 at linode. ssh -L 127.0.0.1:3306:[[remote ip]]:3306 user@server -N I want to set up ssh tunneling so that I can access a remote mysql server. First of all, I'm told bind: Address already in use. This is only after I've tried the command before. How do I manually close a port forwarding session? Second, when I change the command to be ssh -L 127.0.0.1:3310:[[remote ip]]:3306 user@server -N (I changed the local port to listen on). I'm told channel 1: open failed: connect failed: Connection refused when I try to connect to the mysql server via mysql workbench or sequel pro. To connect through mysql workbench I use the following settings: host: 127.0.0.1 port: 3310 (if 3306 is in use) username: mysql username password: mysql password database: I don't put anything in

Read the article
subdomain/virtualhost problem on unix + apache

- by Aaron

Hello, I'm having a strangely difficult time setting up a subdomain (x.example.com). The main site works fine, but I get 404 errors attempting to hit x.example.com no matter how I set up the VirtualHost config. NameVirtualHost *:80 <VirtualHost *:80> ServerName www.example.com DocumentRoot /var/www/example.com/htdocs ServerAlias example.com </VirtualHost> <VirtualHost *:80> ServerName x.example.com ErrorLog /var/logs/x-error-log CustomLog /var/logs/x-access-log common DocumentRoot /var/www/x/htdocs </VirtualHost> As far as I can tell, this is a vanilla set up. Any suggestions would be appreciated.

Read the article
Virtual box lost files

- by Paul Lloyd

I have been running Virtual Box on a Macbook Pro for a year or more, with an old version of Windows XP running on the virtual machine. Recently my Mac battery dies completely and I had left VB / Windows running. When I re-started the Mac, VB would not load. I reinstalled a recent download of VB from a DMG file I had stored. Now VB starts but when I try to start the virtual machine I get the following message, Failed to open a session for the virtual machine Windows XP. Failed to load VMMR0.r0 (VERR_SUPLIB_WRITE_NON_SYS_GROUP). Result Code: NS_ERROR_FAILURE (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} I have been backing up the MAC using Time Machine and have backups going back months. I really need to access the windows files as they have my Accounts and other business critical stuff. Any ideas please, or does anyone know where I can get some support for this combination of hardware / software, apologies I am a novice in this area. Thanks in advance.

Read the article
Mapping of memory addresses to physical modules in Windows XP

- by Josef Grahn

I plan to run 32-bit Windows XP on a workstation with dual processors, based on Intel's Nehalem microarchitecture, and triple channel RAM. Even though XP is limited to 4 GB of RAM, my understanding is that it will function with more than 4 GB installed, but will only expose 4 GB (or slightly less). My question is: Assuming that 6 GB of RAM is installed in six 1 GB modules, which physical 4 GB will Windows actually map into its address space? In particular: Will it use all six 1 GB modules, taking advantage of all memory channels? (My guess is yes, and that the mapping to individual modules within a group happens in hardware.) Will it map 2 GB of address space to each of the two NUMA nodes (as each processor has it's own memory interface), or will one processor get fast access to 3 GB of RAM, while the other only has 1 GB? Thanks!

Read the article
Ubuntu VPS - email and webserver

- by xZero

I have a VPS based on Ubuntu, it has installed whole LAMP, everything needed for a web server and it works perfectly, but I'm still not able to configure it as a mail server.... I have configured MX record for my domain mail.mydomain.com and this part is OK, I also installed Postfix, Dovecot and Roundcube, configured it using this tutorial: http://ubuntuguide.org/wiki/Mail_Server_setup And after hours of configuring it doesn't work. I have experience with Linux and web hosting, but I successfully configured mail server once in past on Debian 6, and that with help from there. When I try to send email to me my gmail says: Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the server for the recipient domain mydomain.com by dc147738a1117e4c12273.mydomain.com. [MY_SERVER_IP]. The error that the other server returned was: 554 5.7.1 <[email protected]>: Relay access denied Also I have Webmin control panel which works perfectly, how to configure postfix and dovecot from there? Thanks in advance.

Read the article
What is a Linux device name for RAID of sas drives?

- by flashnik

I have a RAID1 using Promise FastTrack TX2650 consisting of 2 SAS drives. What is a Linux device name for them? Like sda is for first sata drive. I have Windows server so I can't look it directly but need this information for smartctl usage. UPDATE. I found how to access RAID: smartctl -d scsi sdb (because I also have a SATA drive). But in this case I just get an information about just raid controller though I wantto get information about drives itself. Is it possible? Promises's control panel provides information only about their healthy status (boolean) and I want more. Mostly now I need information about temperature.

Read the article
SSH with X11 forwarding to host where I don't have a home-dir

- by Albert

I am trying to ssh with X11 forwarding into a host where I don't have a home directory. Because of that, xauth fails and X11 doesn't seem to work. I tried to specify a home-directory in advance but I guess it doesn't export env-vars to the host. zeyer@demeter:~> HOME=/tmp ssh ares -XY Password: Warning: No xauth data; using fake authentication data for X11 forwarding. Last login: Mon Mar 28 11:52:57 2011 from demeter.matha.rwth-aachen.de Have a lot of fun... Could not chdir to home directory /home/zeyer: No such file or directory /usr/bin/xauth: error in locking authority file /home/zeyer/.Xauthority zeyer@ares:/> Is there any trick I can make the X11 forwarding work? I still have write access to /tmp. But I am not sure how to setup the xauth fake authentication data manually.

Read the article
Why do I see router and not my real IIS?

- by Tim Tom

I am trying to access IIS through web but unable to do so. Basically I have a router (which functions as router and modem) that is given by ISP and I have another router connected to the router given by ISP. My ISP's router can be visited through 192.168.0.1 and the router that I connected to ISP's router can be visited through 192.168.1.1 Please see my ISP's router: As you can see I have DMZ enabled for my router of 192.168.1.1 Now please see my router of 192.168.1.1: As you can see I added a virtual server for port 80 where 192.168.1.125 is my private IP. I rebooted both of my modems an tried to visit my IP from: http://www.whatsmyip.org/ and after doing so, when I type my live IP I still see my router of 192.168.0.1 instead of my IIS. What am I missing? Note: I have disabled Firewall on both of the routers. Any help would be appreciated.

Read the article
Why do I see router and not my real IIS?

- by Tim Tom

I am trying to access IIS through web but unable to do so. Basically I have a router (which functions as router and modem) that is given by ISP and I have another router connected to the router given by ISP. My ISP's router can be visited through 192.168.0.1 and the router that I connected to ISP's router can be visited through 192.168.1.1 Please see my ISP's router: As you can see I have DMZ enabled for my router of 192.168.1.1 Now please see my router of 192.168.1.1: As you can see I added a virtual server for port 80 where 192.168.1.125 is my private IP. I rebooted both of my modems an tried to visit my IP from: http://www.whatsmyip.org/ and after doing so, when I type my live IP I still see my router of 192.168.0.1 instead of my IIS. What am I missing? Note: I have disabled Firewall on both of the routers. Any help would be appreciated.

Read the article
How to find out what is installed on a server

- by masfenix

Hi, im an undergrad student and we have special access to a server. The server is a unix server (dont know the OS or anything.. is there a way to find out? ). we also get a website associated with the server. There is a public_html folder. I uploaded with a test file with phpinfo() but the server didnt parse it (yes i had the right extension) . So im guessing PHP isnt installed. is there a way to see what "common" languages ARE installed?

Read the article
Windows Server 2012 Metro shortcut icons do not show for other users

- by Andrew

I have installed SQL Server 2012 and SharePoint 2013 on my Windows Server 2012 machine using a dedicated domain install account. When I log into the same machine with a user account, all the icons for these applications are missing! I can still access the applications by finding them in 'Program Files', however it is very annoying. (For example, I'm not exactly sure where the SharePoint PowerShell is located, and frankly I don't want to know either) In previous versions of Windows Server, the Icons always showed up in the Start Menu. Does anyone know how I can copy the shortcuts in one account to another?

Read the article
How can I suppress /etc/issue without losing error messages?

- by Andy

Is it possible to tell the ssh client to not print the connects of /etc/issue to stdout when connecting to a remote host, but to print out any other diagnostic (e.g. error) messages? Either using ssh -q or having LogLevel quiet in ~/.ssh/config suppresses the /etc/issue printing, but also turn off error messages. I've tried touching ~/.hushlogin as well - that stops /etc/motd being printed, but doesn't affect /etc/issue. The most obvious solution is just to remove /etc/issue, but company policy dictates the file be there with dire warnings about unauthorised access. This is non-negotiable. Unfortunately, I've got a bunch of scripts that run across quite a few hosts via ssh, and the log files are a) very large and b) full of legalese. Since quite a lot of stuff runs unattended, I don't want to lose any error messages that are printed.

Read the article
Remote site AD design (2003)

- by Boy Mars

A remote site has about 25 of our 50-ish employees. They have their own AD domain presently (2003) but I want to look at getting them onto the same global domain for ease of access/administration. The remote site has a VPN link but line speeds are very poor. I am already aware of tools like ADMT and have done a few migrations in the past (NT/2003 domains), but this is the first time I have the luxury of designing how this domain is organised. So I'm looking for tips on good AD design; would a remote site be better served as a sub-domain? would this reduce traffic? I am only currently looking at 2003 since only existing machine will be used.

Read the article
Making a home group

- by Siddharth Warrier

I have two computers in my house they are laptop and desktop and I use internet which is of wired connection and it has a modem. The modem has 1 LAN port and 1 USB port. So what I did is that I connected the desktop to the LAN which had Windows 7 Home Premium OS and Laptop to the USB which had Windows 7 Home Basic. As home group can be made with windows 7 home premium and above versions I made it via desktop. The home group was established and the data can be exchanged.But one problem I was able to access internet in desktop but not in laptop. So I tried to share internet but I am not able to do so..... So anyone there to help me ???????

Read the article
vSphere ESX 5.5 hosts cannot connect to NFS Server

- by Gerald

Summary: My problem is I cannot use the QNAP NFS Server as an NFS datastore from my ESX hosts despite the hosts being able to ping it. I'm utilising a vDS with LACP uplinks for all my network traffic (including NFS) and a subnet for each vmkernel adapter. Setup: I'm evaluating vSphere and I've got two vSphere ESX 5.5 hosts (node1 and node2) and each one has 4x NICs. I've teamed them all up using LACP/802.3ad with my switch and then created a distributed switch between the two hosts with each host's LAG as the uplink. All my networking is going through the distributed switch, ideally, I want to take advantage of DRS and the redundancy. I have a domain controller VM ("Central") and vCenter VM ("vCenter") running on node1 (using node1's local datastore) with both hosts attached to the vCenter instance. Both hosts are in a vCenter datacenter and a cluster with HA and DRS currently disabled. I have a QNAP TS-669 Pro (Version 4.0.3) (TS-x69 series is on VMware Storage HCL) which I want to use as the NFS server for my NFS datastore, it has 2x NICs teamed together using 802.3ad with my switch. vmkernel.log: The error from the host's vmkernel.log is not very useful: NFS: 157: Command: (mount) Server: (10.1.2.100) IP: (10.1.2.100) Path: (/VM) Label (datastoreNAS) Options: (None) cpu9:67402)StorageApdHandler: 698: APD Handle 509bc29f-13556457 Created with lock[StorageApd0x411121] cpu10:67402)StorageApdHandler: 745: Freeing APD Handle [509bc29f-13556457] cpu10:67402)StorageApdHandler: 808: APD Handle freed! cpu10:67402)NFS: 168: NFS mount 10.1.2.100:/VM failed: Unable to connect to NFS server. Network Setup: Here is my distributed switch setup (JPG). Here are my networks. 10.1.1.0/24 VM Management (VLAN 11) 10.1.2.0/24 Storage Network (NFS, VLAN 12) 10.1.3.0/24 VM vMotion (VLAN 13) 10.1.4.0/24 VM Fault Tolerance (VLAN 14) 10.2.0.0/24 VM's Network (VLAN 20) vSphere addresses 10.1.1.1 node1 Management 10.1.1.2 node2 Management 10.1.2.1 node1 vmkernel (For NFS) 10.1.2.2 node2 vmkernel (For NFS) etc. Other addresses 10.1.2.100 QNAP TS-669 (NFS Server) 10.2.0.1 Domain Controller (VM on node1) 10.2.0.2 vCenter (VM on node1) I'm using a Cisco SRW2024P Layer-2 switch (Jumboframes enabled) with the following setup: LACP LAG1 for node1 (Ports 1 through 4) setup as VLAN trunk for VLANs 11-14,20 LACP LAG2 for my router (Ports 5 through 8) setup as VLAN trunk for VLANs 11-14,20 LACP LAG3 for node2 (Ports 9 through 12) setup as VLAN trunk for VLANs 11-14,20 LACP LAG4 for the QNAP (Ports 23 and 24) setup to accept untagged traffic into VLAN 12 Each subnet is routable to another, although, connections to the NFS server from vmk1 shouldn't need it. All other traffic (vSphere Web Client, RDP etc.) goes through this setup fine. I tested the QNAP NFS server beforehand using ESX host VMs atop of a VMware Workstation setup with a dedicated physical NIC and it had no problems. The ACL on the NFS Server share is permissive and allows all subnet ranges full access to the share. I can ping the QNAP from node1 vmk1, the adapter that should be used to NFS: ~ # vmkping -I vmk1 10.1.2.100 PING 10.1.2.100 (10.1.2.100): 56 data bytes 64 bytes from 10.1.2.100: icmp_seq=0 ttl=64 time=0.371 ms 64 bytes from 10.1.2.100: icmp_seq=1 ttl=64 time=0.161 ms 64 bytes from 10.1.2.100: icmp_seq=2 ttl=64 time=0.241 ms Netcat does not throw an error: ~ # nc -z 10.1.2.100 2049 Connection to 10.1.2.100 2049 port [tcp/nfs] succeeded! The routing table of node1: ~ # esxcfg-route -l VMkernel Routes: Network Netmask Gateway Interface 10.1.1.0 255.255.255.0 Local Subnet vmk0 10.1.2.0 255.255.255.0 Local Subnet vmk1 10.1.3.0 255.255.255.0 Local Subnet vmk2 10.1.4.0 255.255.255.0 Local Subnet vmk3 default 0.0.0.0 10.1.1.254 vmk0 VM Kernel NIC info ~ # esxcfg-vmknic -l Interface Port Group/DVPort IP Family IP Address Netmask Broadcast MAC Address MTU TSO MSS Enabled Type vmk0 133 IPv4 10.1.1.1 255.255.255.0 10.1.1.255 00:50:56:66:8e:5f 1500 65535 true STATIC vmk0 133 IPv6 fe80::250:56ff:fe66:8e5f 64 00:50:56:66:8e:5f 1500 65535 true STATIC, PREFERRED vmk1 164 IPv4 10.1.2.1 255.255.255.0 10.1.2.255 00:50:56:68:f5:1f 1500 65535 true STATIC vmk1 164 IPv6 fe80::250:56ff:fe68:f51f 64 00:50:56:68:f5:1f 1500 65535 true STATIC, PREFERRED vmk2 196 IPv4 10.1.3.1 255.255.255.0 10.1.3.255 00:50:56:66:18:95 1500 65535 true STATIC vmk2 196 IPv6 fe80::250:56ff:fe66:1895 64 00:50:56:66:18:95 1500 65535 true STATIC, PREFERRED vmk3 228 IPv4 10.1.4.1 255.255.255.0 10.1.4.255 00:50:56:72:e6:ca 1500 65535 true STATIC vmk3 228 IPv6 fe80::250:56ff:fe72:e6ca 64 00:50:56:72:e6:ca 1500 65535 true STATIC, PREFERRED Things I've tried/checked: I'm not using DNS names to connect to the NFS server. Checked MTU. Set to 9000 for vmk1, dvSwitch and Cisco switch and QNAP. Moved QNAP onto VLAN 11 (VM Management, vmk0) and gave it an appropriate address, still had same issue. Changed back afterwards of course. Tried initiating the connection of NAS datastore from vSphere Client (Connected to vCenter or directly to host), vSphere Web Client and the host's ESX Shell. All resulted in the same problem. Tried a path name of "VM", "/VM" and "/share/VM" despite not even having a connection to server. I plugged in a linux system (10.1.2.123) into a switch port configured for VLAN 12 and tried mounting the NFS share 10.1.2.100:/VM, it worked successfully and I had read-write access to it I tried disabling the firewall on the ESX host esxcli network firewall set --enabled false I'm out of ideas on what to try next. The things I'm doing differently from my VMware Workstation setup is the use of LACP with a physical switch and a virtual distributed switch between the two hosts. I'm guessing the vDS is probably the source of my troubles but I don't know how to fix this problem without eliminating it.

Read the article
Is there a quick way to create a Windows shortcut to a file without it validating the path?

- by Alistair McMillan

Trying to create a shortcut for someone else. It needs to point to files on one of their mapped drives. Instead of waiting for them to be available and create the shortcut on their PC, I was hoping to just create the shortcut on my PC and then transfer it over to their PC. However Windows tries to validate the path as you create the shortcut and since I don't have access to the same files it is throwing up an error and won't create the shortcut. Is there a way to create a shortcut without the path being validated?

Read the article

< Previous Page | 744 745 746 747 748 749 750 751 752 753 754 755 | Next Page >