Search Results

Search found 24516 results on 981 pages for 'visual c 2008'.

Page 749/981 | < Previous Page | 745 746 747 748 749 750 751 752 753 754 755 756  | Next Page >

• Update BIOS on Sun Fire X4150 server

  - by Massimo

  I have some Sun Fire X4150 servers with a very old BIOS release (1ADQW015), which seems to have some compatibility problems with WMware ESX Server 3.5 and Windows 2008 R2 virtual machines; so I want to update the BIOS on them. The problem: according to this page, if your servers run ELOM (mine do), you first need to update to the latest ELOM release, then to the interim transition release, then finally you can update to the latest one. Ok, I'm willing to do that... but it looks like Sun (now Oracle) will happily let you download the latest firmware DVD (3.3.0), but it will not let you download the transition release (2.0) if you don't have a support contract. Well, I actuall don't care at all about the servers' management controllers (we don't even use them), so upgrading from ELOM to ILOM is totally irrelevant to me; but I need to update the servers' BIOS. So my question is: can I update the servers' BIOS to the latest version without doing the full ELOM-to-ILOM migration, or will this not work (or even make the servers unusable)? Do BIOS versions and SP ones need to be matched, or can one be updated without bothering with the other? Bonus question: if this whole ELOM-to-ILOM thing actually is needed in order to update the BIOS, can that 2.0 CD-ROM be obtained without having a support contract with Sun/Oracle (which we are definitely not going to sign, being that quite old hardware)? Update: I tried upgrading only the BIOS on one of the servers, and it didn't boot anymore. So it really looks like a full firmware upgrade is needed, and the management controller and BIOS versions should be kept in sync. So... where can I find that *&!£%$% 2.0 CD-ROM? Or at least the transition firmware that can be found on it?

  Read the article

• Deploying Windows Service through group policy fails with Event ID 102

  - by Sören Kuklau

  I'm trying to deploy a custom Windows Service (written in C#; installed through a VS setup project) using a group policy. To help debug this, I also have two additional MSIs in the same policy. All three packages are deployed as a machine policy, not a user one. On one machine (runs Windows Server 2008; no UAC), all three deploy fine. The service is set to Automatic, as expected. On two machines (run Windows 7; UAC), the two other MSIs deploy fine, but my service fails to install. The event log gives an event ID of 102, which appears to be a permissions problem: The install of application "Package Name" from policy "Policy Name" failed. The error was The installation source for this product is not available. Verify that the source exists and that you can access it. However, all three packages come from the same share linked through UNC, so this is unlikely. My guess is that UAC is the problem; that the service requires additional permissions. Do I need to alter the MSI somehow?

  Read the article

• Cross-forest universal groups on Windows Server?

  - by DotGeorge

  I would like to create a Universal Group whose members are a mix of cross-forests users and groups. In the following example, two forests are mentioned (US and UK) and two domains in each forest (GeneralStaff and Java): For example, the universalDevelopers group may comprise of members from UK.Java.Developers and US.Java.Developers. Then, for example, there may be a group of universalSales which contains the users UK.GeneralStaff.John and US.GeneralStaff.Dave. In UK forest at the minute, I can freely add members and groups from the UK. But there is no way to add members from the US forest, despite having a two-way trust in place... e.g. I can login with US members into UK and vice-versa. A further complication is that, with a Universal group in the UK (which contains three domains), I can only add two of the three. It can't see the third. Could people please provide some thoughts on why cross-forest groups can't be created and ways of 'seeing' all domains within a forest. EDIT: This is on a combination of Windows 2003 and 2008 server. Answers can be regarding either. Thanks!

  Read the article

• Problem IIS 7.0 Locking files durring upload

  - by viscious

  I am running a server 2008 with iis7 and the ftp addon on to iis 7.0 I have the ftp site configured and mostly working Except that about 70% of the time when transferring a file the upload will hang forever. If I disconnect the ftp client and reconnect and try to upload the same file I will get an error on the client saying the file is locked. I have to restart the ftp service to clear the lock. I fired up process explorer and did a search on the file in question and sure enough the ftp service has a lock on the file and it takes around 20 minutes to release the lock on its own (and sometimes longer). This lock stays around even after I disconnect the client. Like I said this only happens about 70% of the time, the other 30% of the time it goes through just fine. Things i have verified. -Not a firewall issue. Server is using passive port range 8000-9000 which is allowed on the firewall. -Not a nat issue, server has a globally rout-able ip address -all recommended/required updates installed I have 5 other servers in a very similar configuration and this is the only one i have problems with.

  Read the article

• Experiences in Upgrading from Exchange 2003 to Exchange 2010

  - by gWaldo

  I'm currently running Exchange 2003 SP2 Cluster on a Server 2003 AD Forest (in native 2003 mode), and we beginning to plan the upgrade to Server 2008 AD and Exchange 2010. We have two main sites, one middle-sized office, and a couple of smaller sites which have DCs (which may be RODCs after the upgrade). Currently all of our Exchange cluster is in my main site, but we are considering using the new datastore paradigm for load-balance/failover at the other large site, but this is not set in stone. Right now we are in the information-gathering and planning phases. I am looking for input of any gotchas experienced while performing either upgrade, but especially the Exchange upgrade. Gotchas? What surprised you? What wasn't documented? What said one thing but was misleading? (Confusing either in content or severity.) What is great or horrible about the new system? What worked well? What worked poorly? If you were to do it over again...? (I know that this isn't so much a question that can be definitively answered, but I'm happy to reward insight and useful resources (not the Microsoft documentation, but Blogposts are welcome) with upvotes.) UPDATE A couple items of note: -We are not currently using OWA (currently only the admins), but it may become more of a consideration with iOS devices. -We do have a small number of Blackberries in the environment (< 10%). -In addition to the standard Exchange connectors, we have a third-party connector for Captaris RightFax integration.

  Read the article

• Dell 2970 - HP 1/8 G2 autoloader keeps falling off LSI 2032 SCSI chain

  - by middaparka

  I've a somewhat irritating problem with a Dell 2970 that has a HP 1/8 G2 autoloader (the Ultrium LTO 2 model) attached to the Dell/LSI 2032 non-RAID SCSI card. In essence, sometimes the autoloader/drive completely fails to appear on the SCSI chain (i.e.: there's neither a media changer or tape drive present within the device manager) and sometimes it appears but then subsequently disappears at a seemingly random (yet always inconvenient) time, resulting in backup failures. On most occasions, there are simply no errors logged in the system event log, but I did manage to capture a series of LSI_SCSI event ID 11 ("The driver detected a controller error on \Device\RaidPort0") errors followed by an event ID 129, ("Reset to device, \Device\RaidPort0, was issued") error during testing. I've tried two different cables, both with the same effect – sometimes the autoloader appears (for a while), sometimes it's completely absent. There's only one terminator I've tried to use, but as I've since successfully tested the autoloader on multiple occasions (albeit via a Adaptec U160 card on a different machine), my gut feel is that the issue doesn't lie with the terminator, or indeed the autoloader itself. As such, I'm just wondering if anyone has any ideas? It's most likely not relevant, but this is all under Windows SBS 2008, running Backup Exec 12.5 SBS edition (the Dell version), both fully patched. Addidtionally, the autoloader is running the latest firmware. It's been a while since I've dealt with anything SCSI, so all suggestions will be gratefully, gratefully received.

  Read the article

• Share Exchange Calendar Outside Organization

  - by CalCurious

  I'm trying to figure out the best way to meet a user's (Corp-A-User) request to share their calendar with someone at another company (Corp-B-User). We're running Microsoft SBS 2008 with Exchange 2007 and SharePoint. The remote user is running Exchange, version unknown. Corp-A-User wants to give the Corp-B-User the ability to create appointments on Corp-A-User's calendar. This will naturally require sharing of Free/Busy information. Corp-A-User naturally lacks the vision to seen ANY problem with giving Corp-B-User full access to their calendar. But, I see the problems with that and would prefer that Corp-B-User have only the ability to see Free/Busy and create appointments. Most of the external publishing options that I have thought of, such as WebDav, allow displaying a user's calendar, but there are problems with security and the ability to create appointments. Right now, I'm thinking the cleanest solution would be to use a Google calendar along with Google Calendar Sync for the two user's Outlook clients. But, I'm not sure if there isn't a better way and I hate teh idea of pushing a corporate calendar up to Google. Not to mention the issues likely to pop up from the multiple sync paths. Does any one have a good solution for this scenario that would be willing to share what they use?

  Read the article

• Active Directory + IIS + SQL + ASP.NET

  - by Amira Elsayed Ismail

  I have sent the following question to stackoverflow website I have installed Windows server 2008 r2 on a virtual machine, Can I install Active directory with domain controller + IIS + SQL server on the same machine? I want to make web application and this web application will authenticate users from Active Directory, the web application should be published on the server IIS and the users should access it remotely from their home using domain name of my machine, Someone tell me that its very wrong to have IIS and Active directory on the same machine I got the following Answer You can't use ActiveDirectory over the internet. At least not without something like a VPN as a middle man. Their home computers will not be joined to the domain, so there is no pass-through authentication. Yes, it's a bad idea to put AD on the web server. Why is too complex to get into in an answer here. Suffice it to say that even if you did do this, it's probably would not work the way you are thinking it should. It's not impossible to do this. For instance, many of the Microsoft "Small Businesss" products put IIS, AD, and SQL Server on the same server. But, you kind of have to know what you're doing to configure it securely. Then I add the following comment Thanks for ur reply.so what you think about the best way to do this as I didn't do anything like that before should I install active directory on a machine and IIS on another machine ? and what about SQL should I add it to the same server of active directory ? I didn't mentioned also that it will be Microsoft dynamics server that will access some information about work and i have to read data from axapta also ? also what is VPN and how can I use it to let users access my web application anywhere ? Sorry for my long questions and thanks in advance so please if anyone can help I will be thankful

  Read the article

• Cannot access server shares over VPN

  - by DuncanDavies

  I've set up a single hosted server to use as a development environment for a web-based application. The web app is served up fine on port 80, however I'm struggling to get my VPN to behave how I'd expect so the developers don't have the access they require. The VPN connects fine and I can access the back-end database (SQL Server) which resides on the server with the client tools from the laptops. However they cannot access any shared folders. The server's local IP address is 10.x.x.x, and I've assigned a static IP address pool to RRAS (of 192.168.100.1 - 20). The clients pick up a valid IP Address (i.e. 192.168.100.9) when they connect. There is no name resolution setup, DNS or WINS. When connected via VPN the clients can ping the server (192.168.100.1) by IP Address, but cannot map a drive to a shared folder (net use * \\192.168.100.1\xxxxx) - I get 'System error 53 has occurred. The network path was not found.' I don't understand why I can ping by the ip, but not map by it. Some details: Server OS is Windows 2008 (Datacenter) VPN is SSTP using RRAS Clients are all Windows 7 I've tried temporarily disabling the firewalls So, why can we not access the file system when everything else (ping, RDP, SQL Server clients tools) works? Thanks for your help Duncan

  Read the article

• Oracle 10g for Windows does not start up on system boot

  - by Mike Dimmick

  We have an Oracle 10g Enterprise Edition installation (10.2.0.1.0) on a Windows Server 2003 virtual machine. It was initially created with Virtual Server 2005 R2 SP1 but has now been migrated to Windows Server 2008 Hyper-V. The services start on system boot, but the instance does not start up. This problem was actually occurring on Virtual Server after a migration from one server to another, but I managed to fix it then with: oradim -edit -sid ORCL -startmode auto However, this now has no effect. oradim.log (in %OracleHome%\database\oradim.log) says: Thu Jun 10 14:14:48 2010 C:\oracle\product\10.2.0\db_3\bin\oradim.exe -startup -sid orcl -usrpwd * -log oradim.log -nocheck 0 Thu Jun 10 14:14:48 2010 ORA-12560: TNS:protocol adapter error sqlnet.log in the same folder has: Fatal NI connect error 12560, connecting to: (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleorcl)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=orcl)(CID=(PROGRAM=C:\oracle\product\10.2.0\db_3\bin\oradim.exe)(HOST=ORACLE-VM)(USER=SYSTEM)))) VERSION INFORMATION: TNS for 32-bit Windows: Version 10.2.0.1.0 - Production Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production Time: 10-JUN-2010 14:14:48 Tracing not turned on. Tns error struct: ns main err code: 12560 TNS-12560: TNS:protocol adapter error ns secondary err code: 0 nt main err code: 530 TNS-00530: Protocol adapter error nt secondary err code: 2 nt OS err code: 0 The ORA_ORCL_AUTOSTART registry value is set to TRUE, so it should be auto-starting - and you can see that it's trying to. The problem also occurs when stopping and restarting the OracleServiceORCL service. I've enabled SQL*Net tracing which shows: [10-JUN-2010 15:09:33.919] snlpcss: entry [10-JUN-2010 15:09:34.419] snlpcss: Unable to spawn Oracle oracle (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq))) orcl, error 2. [10-JUN-2010 15:09:34.419] snlpcall: exit On a hunch that error 2 is Windows error 2 (file not found) I tried restarting the service with Process Monitor watching oradim.exe, but this appears to delay things just enough that it always works. Right now I have a horrible hack where I've created a Scheduled Task to run oradim -startup -sid ORCL when the Administrator account logs on, and set the VM to auto-logon. I'd still like to work out why it's not working.

  Read the article

• Using my old PC as a web/file server?

  - by Garrett

  I have an old desktop computer that I've been trying to sell for AGES. I guess nobody is looking for computers because it was advertised at a dirt cheap price on craigslist, local papers, etc. Anyways, I was wondering if it would be worth it to set it up as a home file server, a web dev server (I have a web host for actual production use), and maybe host a few server applications (ex: ventrillo). The computer is actually an old Dell that I cannibalized after the motherboard being destroyed by lightning, so it has fairly new parts in it. The specs are: P4 3.4GHz w/ HT and Artic Cooling Freezer 7 3GB DDR2 533 RAM 80GB hdd (will upgrade the hard drive if it's even worth using as a server) basic dvd rom 430 Watt Thermaltake PSU (it might be important to note that it is only 60% efficiency) ATI Radeon x600 256MB Antec 300 case It's not a really beefy machine, I just can't see giving it away or putting it in the corner to just collect dust. I have Windows Server 2008 R2 Standard and I am confident in my skills in operating most Linux operating systems. I'd also be using it to tinker with when I learn new things in my server admin classes (I'm finishing my 2nd year in college at the moment so I'm still learning) Also, my house is quite old and the electrical wiring is pretty poor (it MIGHT be up to code, then again, where I live most people don't even know what regulations are or let alone know how to spell it...) Would it be safe to leave it running all day and is it going to run up my electric bill because of the PSU efficiency? I only have 5mbit cable internet, but I won't be running very bandwidth intense services on it so it should be ok. I should elaborate on why I am concerned about the power. The circuits should be fine, but I'm more concerned about fire hazard. What is the likelihood that the server could cause an electrical fire? Again, thank you all for the feedback!

  Read the article

• Pros and Cons of a proxy/gateway server

  - by Curtis

  I'm working with a web app that uses two machines, a BSD server and a Windows 2000 server. When someone goes to our website, they are connected to the BSD server which, using Apache's proxy module, relays the requests & responses between them and the web server on the Windows server. The idea (designed and deployed about 9 years ago) was that it was more secure to have the BSD server as what outside people connected to than the Windows server running the web app. The BSD server is a bare bones install with all unnecessary services & applications removed. These servers are about to be replaced and the big question is, is a cut-down, barebones server necessary for security in this setup. From my research online I don’t see anyone else running a setup like this (I don't see anyone questioning it at least.) If they have a server between the user and the web app server(s), it is caching, compressing, and/or load balancing. Is there anything I’m overlooking by letting people connect directly from the internet ** to a Windows 2008 R2 server that’s running the web application? ** there’s a good hardware firewall between the internet with only minimal ports open Thank you.

  Read the article

• MySQL Not Turning On

  - by Shalin Shah

  I have an amazon ec2 instance running on the Amazon Linux AMI and its a micro instance. I wanted to install Django onto my server so I entered these commands wget http://www.mlsite.net/blog/wp-content/uploads/2008/11/go wget http://www.mlsite.net/blog/wp-content/uploads/2008/11/django.conf chmod 744 go ./go So after I was done, I ran sudo service httpd restart and sudo service mysqld restart and This is what came up for mysqld: Stopping mysqld: [ OK ] MySQL Daemon failed to start. Starting mysqld: [FAILED] So I deleted the django files /usr/local/python2.6.8/site-packages/django_registration.egg and I tried finding the error and I found out that in my /etc/my.cnf for the socket, it said socket=/var/lock/subsys/mysql.sock so I went to /var/lock/subsys/ and there was no mysql.sock. I tried creating one using vim but it still didn't work. Then I checked the error log and it said Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) So I am pretty much lost right now. I know it has something to do with mysql.sock If you might know a reason why this was caused could you please let me know? I have a wordpress site on my server, so i kind of need MySQL to work. Thanks!

  Read the article

• Time sync fails on Hyper-V VM, but succeeds when I log in as a domain user

  - by Richard Beier

  We have a Windows Server 2003 SP2 VM running on Hyper-V (Server 2008 R2 host). The VM has Hyper-V time synchronization enabled. I noticed that the time on the VM was fast by around 25 minutes. I saw the following in the event log: The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible. No attempt to contact a source will be made for 15 minutes. NtpClient has no source of accurate time. The time provider NtpClient cannot reach or is currently receiving invalid time data from ourdc.ourdomain.local (ntp.d|192.168.2.18:123-192.168.2.2:123). Time Provider NtpClient: No valid response has been received from domain controller ourdc.ourdomain.local after 8 attempts to contact it. This domain controller will be discarded as a time source and NtpClient will attempt to discover a new domain controller from which to synchronize. I had been logged in as a local user. (We have an old app that runs on this VM - it requires a user to be logged in at all times, and we use a non-domain user account for this.) When I logged in as a domain user, the clock almost immediately corrected itself. Running "w32tm /monitor" and "net time" as the domain user showed no errors, and indicated that our domain controller was the time source. Does anyone know what might cause this, and why logging in under a domain account fixes the problem? I'm wondering if the time will start to drift again. Thanks for your help, Richard

  Read the article

• Inconsistent SMTP Access

  - by Mike Hanson

  I have a mail server setup on Windows Server 2008. All was working fine, until I wanted to map a drive on the server so that I can access files on another machine. Windows prompted me to configure Network Discovery, which I did with the "Home/Office" option rather than "Public". After that, several access points that worked before stopped working, like VNC, SMTP, etc. After reinstalling those packages, things appeared to be working again. Unfortunately, problems have returned with my SMTP server. I can use an web-based SMTP tester, and it connects in 62msec (as expected). However, if I telnet from my machine on the same LAN, it takes more than 20 seconds to connect! When I try to send messages from Outlook, it times out entirely with the message: Sending' reported error (0x80042109) : 'Outlook cannot connect to your outgoing (SMTP) e-mail server. If you continue to receive this message, contact your server administrator or Internet service provider (ISP).' I've checked the firewall settings, I've tried configuring it to use port 587 instead of 25, but nothing gets around this problem. Does any have any useful insights? Thanks in advance!

  Read the article

• RDP Connection to Windows 7 stays really slow

  - by Pavlo

  I have an Issue with connecting to Windows 7 via RDP. I can open an RDP Session, but regardless of any settings, the responce times are really long. This in particulary is the case when opening a web page in a browser. I've tried IE, Firefox and Google Chrome. I also use RDP connection to a Windows 2008 Server from the same client machine, and the speed is very normal with all features turned on. We have Gigabit Ethernet here. So I think it can not be the client's fault. What concerns Windows 7 Machine, I've tried shutting all the sraphic features off and turning the color levels to 256 colors. Result - the same. If I work locally on the machine - I can not see any lags. What else have I tried: Using old RDP 5 Client from Microsoft Setting network autotuninglevel as seen here Do You have some ideas? Thanks in advance! Update the problem seems to be with rendering window contents. All the window borders and pannes are rendered pretty quickly, but the content shows up very slowly. Also mouse movements are recognised by the Win 7 box only after some period. Are there some hidden settings in the RDP, where one could turn some advanced features off or turn some caching on? I use Bitmap Caching, but this apparently doesn't help.

  Read the article

• Looking to replace Ghost with FSArchiver or Clonezilla, few questions about capabilities

  - by Daniel Wright

  I work for a PC Repair company and we are looking into setting up a dedicated machine with externally accessible SATA bays to clone harddrives as a safety net incase something goes wrong during a repair. We currently use a SATA/PATA to USB bridge called MagicBridge and Norton Ghost on any workstation, but we're looking to move away from Ghost. We have a computer with a large RAID5 array with Windows Server 2008 Standard currently installed, but this can be replaced with a flavour of *nix. I have some experience with Clonezilla, but FSArchiver also seems like a suitable replacment too. My Head Technician wants to know if my chosen solution (probably Clonezilla or FSArchiver, but I'm open to free suggestions) is capable of: Cloning a degraded RAID, such as a single drive from a RAID1 mirror without complaining Producing images that are easily mountable (he'd prefer them to be mountable in Windows, but if there is no other easy way, *nix should be fine) akin to Ghost Explorer so individual files can be restored as well as being able to do bare metal restores. My apologies for wordiness but I wanted to be thorough in my explaination. Thanks for any suggestions or tips :) EDIT: I've just found out that Clonezilla has a workaround for cloning RADI1 drives EDIT2: Found the answer to both of my questions, aparently I wasn't phrasing my searches right, could this question be deleted please?

  Read the article

• Server 2008R2 in Extra Small Windows Azure Instance?

  - by Shawn Eary

  Windows Azure hosting for an Extra Small (XS) Windows VM seems to come out to be about $10 a month right now. I think this XS instance gives you the equivalent of a 1 GHZ CPU with 768MB of RAM. I think the minimum requirements for Server 2008 is 1GHZ CPU with 512MB of RAM. Also, I think the minimum requirements for SQL Server Express is 1GHZ CPU with 256 MB of RAM and that the minimum requirements for Team Foundation Server Express 11 Beta is 2.2 GHZ CPU with 1 Gig of RAM (this 2.2 GHZ part could be a problem for my 1 GHZ XS VM...). Given the performance of the XS Azure instance, would I be able to install: a very basic MVC web site; a free instance of SQL Server Express; a free single user instance of Team Foundation Server Express 11 Beta and run the XS VM instance without serious crashing? I know there are other Shared WebHost providers that can provide these features for me, but those hosting providers have the following disadvantages: They sometimes cost a lot of money after all of the "addons" are in place They probably don't provide the level of security and employee integrity that Microsoft can provide They don't provide the total control that an Azure VM seems to provide

  Read the article

• Annoying trackpad freeze on MacBook [solved]

  - by Hafthor

  NOTE: Question marked answered because it was forced after being put up for bounty. Actual solution was to have Apple repair it. Trackpad usually works, but sometimes stops responding for around 5 seconds and then suddenly starts working again. Seems to happen when I switch between typing and moving + button-clicking and also when I do a lot of double-clicking. Tried turning off the "Ignore accidental trackpad input". Apple replaced the keyboard/mouse under warranty. Problem remains. Any ideas? Edit: White non-unibody Late-2008 13" MacBook - fully up-to-date OS. Doesn't seem to matter if it is plugged in or not. Edit: Updated to Snow Leopard - seems to have made it worse. Edit: Applying even a little pressure to the left palm rest creates this condition. Apple replaced the top case again and this time it seems to have fixed it. Although, it looks like they may have added a spacer on the left palm rest to "fix" it.

  Read the article

• IIS 7.5 stops serving requests for no apparent reason

  - by Steffen

  We're running a site on 4 virtual Win 2008 R2 64 bit servers. This is the only site on the IIS, and we use Windows Network Load Balancing to share the load between our 4 virtual servers. We've used these virtual servers for approximately a week, and we're starting to see some issues. For no apparent reason the IIS stops serving pages, and doesn't even respond with an error. So upon requesting a page from the server, the browser just waits infinitely (or until it decides to give up clientside) Sometimes an iisreset fixes the issue, other times we have to reboot the entire virtual server. There are no traces in the eventlog of why this happens, and there's no traces in our applications exception log neither. Furthermore this happens even when there's a very small load on the server, so it doesn't seem to be because it's flooded with requests. So frankly I'm at a loss here - I have no idea where to start debugging this issue :-( I'm quite certain we never had these issues on our physical servers, however they were running Win 2003 32bit, so there are quite a few differences between them and the virtual ones. (Which obviously makes it difficult to tell what exactly causes this)

  Read the article

• Making libmagic/file detect .docx files

  - by Jonatan Littke

  As seen elsewhere, docx, xlsx and pttx are ZIPs. When uploading them to my web application, file (via libmagic andpython-magic) detects them as being ZIP. I store the contents of the file as a blob in the database, but naturally I don't want to trust the user with what kind of file type this is. So I would like to trust file for and automatically generate a filename during download. I know one can modify /etc/magic but the format (magic(5)) is way too complicated for me. I found a bug report on the issue at Debian bugs but since it's from 2008 it doesn't seem to be fixed any time soon. I guess my only other alternative is to indeed trust the user (but still store the contents as a blob) and only check the file extension based on the file name. This way I can disallow some extensions and allow others. And when the user re-downloads his file, he can have it in whatever way he uploaded it. But this solution is insecure if the file is shared with others, since you can simply rename the file to allow uploading it. Any ideas? Lastly, I found a list of magic numbers for docx etc, but I'm unable to convert these into the magic(5) format.

  Read the article

• The SSL certificate doesn't established

  - by Andrey Eagle

  situation following: Windows Server 2008 R2 platform. Certificate installation in the IIS Manager occurs successfully with *.cer file but if I refresh the manager (F5), the certificate vanishes from the list. And, respectively in the Bindings window, at https addition, the certificate is absent in the menu. Thus if to open certificates via the MMS console, it can be seen in the Personal store. Whether there is any possibility to make so that the web server could "see" this certificate or how to make so that it didn't disappear from the list? Prompt how to solve this problem, thanks in advance! P.S. The certificate is acquired in tawte. In total that to me provided, these are account data where it is possible simply with save-pastit the certificate in 2 options: PKCS#7 and X.509. Here is the manual I used. P.S.2 If Complete Certificate Request with *.p7b I get an error: Cannot find the certificate request that is associated with this certificate file. Acertificate request must be comleted on the computer where the request was created.

  Read the article

• filter / directing URLs coming onto a network

  - by Jon

  Hi all, I an not sure if this is possible or not but what i would like to do is as follows: I have one IP address (dynamic using zoneedit.com to keep it upto date). I have one webserver running my main site which is an Ubuntu machine running Apache. I also have a windows 2008 server running another site. Just to confuse things I also run part of my Apache site on the windows server, currently using proxypassreverse to get the information from it. So it looks something like this: IP 1.2.3.4 maps to mydomain.com as well as myotherdomain.com All requests that come into port 80 are forwarded to the Apache box and I use Virtualhost settings to proxy the windows sites where needed. so mydomain.com is an Apache site mydomain.com/mywindowssection is the Apache server using proxypassreverse to get part of the site from the Windows server myotherdomain.com uses Apache and proxypassreverse to get the whole site. What I would like to be able to do is forward all http requests that come into my network to one machine that figures out who should be serving that content. so: mydomain.com would go to the Apache machine myotherdomain.com would go the windows machine. I am just in the process of setting up an Astaro gateway (never done this before so taking a while to configure) as my firewall, dns, dhcp etc, don't know if this can handle it. I have the capacity to run a VM on the network if a seperate box would be needed for this process as well. Thanks for any and all feedback. Jon

  Read the article

• Copy past speed very slow for a large number of tiny files on Windows but not on linux

  - by Arno2501

  I've got this folder which contains 15'000 of tiny images (around 400 bytes each). If I copy past this folder on my laptop (Windows 7, i7 latest gen, superfast ssd) it takes about 30 seconds (yes for 7 megs !!!) the average transfer rate is 400 KBytes / second which is so slow. I mean my usual transfer rate is more like hundreds of MBytes per second !!! I get the same problem on my servers (Windows 2003, 2008 /r2) and on every Windows box that I could get my hands on. On the other hand if I do the same on a linux box (debian base, Ext3 FS) (which runs on the same SAN than all the windows servers I've tested) It's nearly instantaneous !!! I'm pretty sure the size / number of the files may stress such filesystem more than another but such differences !? Why is that ? Why is it so slow on the windows boxes (more that 30 sec for 7 MB) and so fast on the linux ones (one sec or so) (I mean this was not a hardlink that I've created it was a true copy). Is it a normal behaviour or something unusual ?

  Read the article

• Can I run Excel 2010 on a server?

  - by Glen Little

  This question is not about a person using Excel on a computer that happens to have an Windows Server OS. And it is not about using any Sharepoint services features! The question is about automated processes that use code (Office Automation) to open Excel files, manipulate them, run calculations, read data, save copies of the file and close the files... all in code. In previous versions of Excel the licensing agreement prevented use on a public server, notes from Microsoft warned about the problems trying to use Office Automation in a server environment, and we were warned that Excel was single threaded and not designed for use on a server. Most of the articles about this were written before Office 2010. But now, Excel 2010 is designed to work on a High Performance Computing server using HPC Services for Excel. One HPC document mentions "Windows HPC Server 2008 R2 includes a comprehensive pop-up manager that can handle occasional dialog boxes and pop-up messages". So my question is... is it now "safe" to run code that automates Excel 2010 on a "normal" server without using the HPC services? If not, can the HPC Services for Excel work on a single server? I don't need the high performance, distributed computing, aspect of HPC Services for Excel... just the ability to run Excel on a server. Can that now be done? Thanks, Glen

  Read the article

< Previous Page | 745 746 747 748 749 750 751 752 753 754 755 756  | Next Page >