Search Results

Search found 4316 results on 173 pages for 'disabled'.

Page 75/173 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• IE8 Crash On Startup

  - by Wonko the Sane

  Hello All, I have a problem - IE8 has suddenly stopped working. I was doing some development work, and suddenly IE8 crashed every time I tried to use it. I've rebooted, but still crash every time I try to open it. There is no real indication as to what has gone wrong. It just says "Internet Explorer has stopped working". I've tried almost everything that I've seen when I've Googled it: I disabled all Add-Ins via Manage Add-Ins, but it still crashes on startup* I re-registered IEPROXY.DLL * The thing I don't understand is that if I start from the Run box with the -extoff option, IE starts up. Isn't that the same as disabling all Add-Ins? Any ideas? Thanks, wTs

  Read the article

• Safely Remove Hardware (USB drive) needs End Process for rundll32.exe - Windows XP SP3

  - by Michael Warner

  Image Name PID Modules ========================= ====== ============================================= rundll32.exe 252 ntdll.dll, kernel32.dll, msvcrt.dll, GDI32.dll, USER32.dll, IMAGEHLP.dll, ShimEng.dll, AcGenral.DLL, ADVAPI32.dll, RPCRT4.dll, Secur32.dll, WINMM.dll, ole32.dll, OLEAUT32.dll, MSACM32.dll, VERSION.dll, SHELL32.dll, SHLWAPI.dll, USERENV.dll, UxTheme.dll, guard32.dll, fltlib.dll, comctl32.dll, comctl32.dll, NvMcTray.dll, SETUPAPI.dll, IMM32.dll, nvapi.dll I have to end the rundll32.exe process to safely remove my USB drive. Given the modules rundll32.exe is running, do you know which running module(s) would prevent the USB drive from being safely removed, and if so is there a more permanent straightforward solution such as changing an automatic service (the list from services.msc) into a disabled/manual service or maybe something else you can think of?

  Read the article

• Everything Windows Explorer does hangs up t some time or another

  - by William Barnes

  Yes this is a duplicate of something I have tried to ask in the past. I think I am posting wrong since my first question was deleted OK I ran SCANNOW nd it came back with no problems. I booted in Safe mode and windows evplorer worked OK. I am not sure what that proves. I also ran AUTRUNS and disabled everything that you said, but it still dies. I read someplace that it could be a service program, but I can't find that link anymore. Something about shutting off all non-windows SP's and then start adding back SP's until it quits. The problem is that sometimes it will work, but most of the time it does not. Makes saving or retrieving anything impossible. SAVEAS hangs up, my Garmin Map updater hangs up etc.. I was having this problem before installing Garmin so I am reasonably sure it is not the problem HELP PLEASE, I don't have many brain cells left and can't afford to lose more.

  Read the article

• Port forwarding no longer works

  - by Auryn

  Prior to testing an OpenVPN installation, I setup a basic VPN server using the software already built into Windows 7. Port forwarding on the Linksys router worked as normal and I was able to connect remotely. After doing an install of OpenVPN Access Server on a spare box running Ubuntu, and adding new ports to be forwarded I was unable to access the VPN from an external source as the required ports all indicated that they were closed. (During testing XRDP and VNCSERVER were also installed to facilitate access to the box) Checking back on the Windows 7 VPN resulted in no access to that vpn setup either. All ports are now reporting a being closed despite being previously open even ports that were being used for other services. Adding and removing port forwarding rules seem to have no effect. At this point, in order to troubleshoot, both the firewall and anti-virus software have been disabled on the Windows 7 machine. Could this be just a router issue? Is there any way out of this without having to reset and reconfigure the router?

  Read the article

• IE "About:Tab" page hijacked

  - by tcv

  Hey folks, Client o' mine, running Windows 7 64-bit, installed Kiwee Toolbar and then uninstalled it. The software is pretty much gone except for one last thing: The About:Tab IE page redirects to a Kiwee search page. I have temporarily disabled the "New Tab" page via Internet Explorer's options, but it annoys me. I have scanned with multiple tools. Spyware Doctor purports to removed it, but they want money to remove it. I would buy it -if- I could be certain it would fix the problem. I've also searched the registry and the filesystem for instances of the program, plus I've removed Kiwee manually via the many manual uninstalls out there. IE's AboutURLs registry entry still points to res://ieframe.dll/tabswelcome.htm and if I enter that URL into IE, the correct New Tab page comes up. Any help appreciated.

  Read the article

• Where default settings are stored after applying GPO?

  - by tester5566

  When I apply a GPO that changes Service startup settings, where the default service startup settings are kept? And how can I read and modify them? The reason of the question is that I have a hundred of servers where most of services are disabled by a baseline GPO for hardening purposes. I want to relax this GPO by removing some services but I do not want that the service startup settings becomes default ones after the GPO is relaxed. So I want to keep the actual hardened state as a default state but allow local admins to change it if necessary. Thank you

  Read the article

• What could be causing Windows to randomnly reset the system time to a random time?

  - by Jonathan Dumaine

  My Windows 7 machine infuriates me. It cannot hold a date. At one point it all worked fine, but now it will decide that it needs to change the system time to a random time and date either in the future or past. There seems to be no correlation or set interval of when it happens. To remedy it I have: Correctly set the time in bios. Replaced the motherboard battery with a new CR2032 (even checked it with a multimeter). Tried disabling automatic internet synchronizing via "Date and Time" dialog. Stopped, restarted, left disabled the Windows Time service. Yet with all of these actions, the time will continue to change. Any ideas?

  Read the article

• Problems accessing FileZilla FTP Server from static IP

  - by Kurru

  I'm trying to connect to my FTP server from my external IP address on Comcast Business. On the gateway I've set up port-forwarding on ports 20-21 to my server. Additionally I've forwarded ports 7000-8000 to my server for use in passive mode. In my FileZilla Server application I've set up passive mode to use my static IP and to use the subset of ports listed above. Unfortunately, it doesn't work through the external static IP for some reason, but I can internally. When I try to connect through static IP, the FileZila monitor says Connected, sending welcome message.... 220 FileZillaServer version 0.9.37 beta could not send reply, disconnected My firewall doesn't register any block events and windows firewall is disabled. What am I doing wrong or missing?

  Read the article

• IIS application pool and UAC

  - by rocku

  Hi, My system is Windows Server 2008 R2 with IIS 7.5. I need to run a site which is allowed to do some administrative tasks. I have created an AD user account and added it to all the required groups. The site's application pool runs with custom identity set to this AD account. This works, however some tasks fail with 'Access is denied'. I have found that it was caused by UAC (with UAC disabled everything works ok). So my question is - is it possible to run an application pool in elevated mode without globally disabling UAC? Possibly just disabling UAC just for this one account.

  Read the article

• UAC-account-users can't see their mounted network-drives

  - by Daniel

  I wrote a few login batches in the Group Policy Management which mount specified devices to specified usergroups. The batches work as they should as long UAC is disabled. My problem is that the UAC-account-users can't see their mounted network-drives because the login scripts run in elevated context. I tried to fix the problem with PsExec (-l) so that the network-folders are mapped with limited user rigths. But it seems that this won't work. (PsExec is already installed on all computers so it can work local.) Has anyone an idea how to fix that problem? I spended a long time in trying to fix the problem but I did not find any solutions about THIS problem.

  Read the article

• Windows 8 Pro Remote Desktop issue

  - by Mike C.

  I have a weird issue here. I'm running Windows 8 Pro. The client computer is also running Windows 8 Pro. Remote Desktop works when I'm in the same network. I tried connecting using my external IP Address and my DynDNS account, neither works. I disabled Windows Firewall and setup DMZ for my computer on the router, still can't get remote desktop to work. I verified www.canyouseeme.org, port 3389 is open, which is obvious since I'm running DMZ! My ISP, Bell Canada (modem/router: Sagemcom F@st 2864), blocks port 80 and 25, but I don't need those for RDP, do I? The funny thing is RDP rejects the connection instantaneously for my IP or DynDNS while it takes a while for another address. Thank you, Michael

  Read the article

• What compatibility trade-offs do we need to make in order to use a hardened SSL config for Nginx?

  - by nathan.f77

  I found some hardened SSL settings in github.com/ioerror/duraconf. Here is the header from the config: This is an example of a high security, somewhat compatible SSLv3 and TLSv1 enabled HTTPS proxy server. The server only allows modes that provide perfect forward secrecy; no other modes are offered. Anonymous cipher modes are disabled. This configuation does not include the HSTS header to ensure that users do not accidentally connect to an insecure HTTP service after their first visit. It only supports strong ciphers in PFS mode: ssl_prefer_server_ciphers on; ssl_session_cache shared:SSL:10m; ssl_session_timeout 10m; # Only strong ciphers in PFS mode ssl_ciphers ECDHE-RSA-AES256-SHA:DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA; ssl_protocols SSLv3 TLSv1; If we were to use these settings on our website, what does "somewhat compatible" mean? For example, would IE6 still be able to connect?

  Read the article

• 401 - Unauthorized: Access is denied error from web app running in IIS 7.5 using App Pool Identity

  - by Eric Gatesman

  I have an ASP.NET app on a Windows 2008 server, IIS 7.5. When I try to access web site, I get a login popup. If I click "cancel" I get a 401 - Unauthorized: Access is denied due to invalid credentials. The app is using Windows authentication (anonymous is disabled). The app has it's own app pool, running under the App Pool Identity. If I change the app pool to run under the NetworkService account, my website functions just fine. I'm guessing that this is just a permissions issue, but can't figure out what permissions I need to change. I gave the App Pool Identity permissions on the physical directory of the app, but that didn't solve the problem.

  Read the article

• MySQL and User level logging

  - by Adraen

  I have been looking at logging only certain users activity in MySQL. I found that the logging could be enabled or disabled for all users but one of the service using the db does a lot of queries and therefore I would like to only log specific users. Google told me that a flag can be SET to enable disable logging, however, I cannot modify the service DB connection code and asking every single user to enable logging before they do anything might not be as reliable as I want. So, do you know if there is any way to log only a set of users queries ? Thanks !

  Read the article

• Windows 2008 R2 Scheduled Task Not Running With Admin Privileges even if granted?

  - by j.rightly

  I have a scheduled task that is running as USER. I have checked the box "Run with highest privileges" in the scheduled task properties. The task is a powershell script that, among other things, reboots the system. The script executes and runs normally, but as a scheduled task, it fails to reboot the system. Here is the kicker: When I manually run the script as USER using the exact same command line as what's in the scheduled task, the script still runs but this time it actually reboots the system. I have UAC disabled and USER is a member of the local Admins group. The local Admins group has the right to shut down the system. Nothing in the event logs offers any clues. Why would the same script running under the same credentials work interactively but not as a scheduled task? UPDATE: This is too weird. When the task ran on schedule, everything worked normally.

  Read the article

• How can I track down what part of pfsense is blocking website access?

  - by Chase Florell

  I've got a PFSense firewall/gateway on our network. Everything works great except for the fact that I cannot access one specific website. Pfsense is running the following packages Country Block LightSquid nmap notes squid squidGuard Strikeback I can access every single website I've ever tried aside from one that we need for business use (http://bridalnetwork.ca) here's the traceroute frodo:~ chase$ traceroute bridalnetwork.ca traceroute to bridalnetwork.ca (192.197.103.73), 64 hops max, 52 byte packets 1 rohan (192.168.5.1) 6.618 ms 1.662 ms 9.207 ms 2 * * * 3 * * rohan (192.168.5.1) 7.225 ms !H 4 rohan (192.168.5.1) 5.314 ms !H 5.701 ms !H 7.573 ms !H frodo:~ chase$ How can I figure out what the reason behind the blockage is? note: this has been tested on every computer on the network with the same results. ps: the pfsense box is 'rohan' (192.168.5.1) Here's what I get with Squid enabled and here's what I get with Squid disabled

  Read the article

• I can't run uwsgi as normal user

  - by atomAltera

  I want to run uwsgi server as www user, but if I write: uwsgi --socket $SOCKET --chmod-socket 666 --pidfile $PIDFILE --daemonize $LOGFILE --chdir $CHDIR --pp $PYTHONPATH --module main --post-buffering 8192 --workers 1 --threads 10 --uid www --gid www A socket creation error occurs: Log: 1 *** Starting uWSGI 1.4.1 (64bit) on [Mon Dec 10 22:15:23 2012] *** 2 compiled with version: 4.4.5 on 17 November 2012 23:31:14 3 os: Linux-2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 4 nodename: autoblog 5 machine: x86_64 6 clock source: unix 7 pcre jit disabled 8 detected number of CPU cores: 2 9 current working directory: / 10 writing pidfile to /tmp/uwsgi_mysite.pid 11 detected binary path: /usr/local/bin/uwsgi 12 setgid() to 1002 13 set additional group 1004 (files) 14 setuid() to 1002 15 *** WARNING: you are running uWSGI without its master process manager *** 16 your memory page size is 4096 bytes 17 detected max file descriptor number: 1024 18 lock engine: pthread robust mutexes 19 unlink(): Operation not permitted [core/socket.c line 109] 20 bind(): Address already in use [core/socket.c line 141]

  Read the article

• Can /etc/hosts.deny/allow be overridden?

  - by Tar

  I have security measures put in place to keep unwanted users out of my server. I've changed the SSH port, disabled root login, have a software firewall to block portscans, and have entries in hosts.deny and hosts.allow. I have various services denied to all but another server of mine should my IP change, and two other administrators + my own IP address. My question is, can hosts.deny/allow configuration be overridden so that they can gain access to my server? Does using chroot jail for running things like an IRC server and Teamspeak server prevent people from gaining access to my server and screwing with it?

  Read the article

• Removing port forwardings programmatically on a ControlMaster SSH session

  - by aef

  Quite a while ago I got an answer telling me how to add a port-forwarding on a running SSH ControlMaster process. To know that helps a lot, but I'm still missing a way to remove such a port forwarding after I don't need that anymore. As far as I know, you can do that through the internal command key sequence on normal connections, this seems to be disabled for ControlMaster clients. Even if that would be possible I would need a solution which I can automatize with scripts, which is surely not so easy this way. Is there a way to do it? And is it easily automatizable?

  Read the article

• Install Windows Server 2008 Core on a Dell Optiplex 790

  - by Alex Marshall

  Does anybody have experience installing Windows Server 2008 Core on a Dell Optiplex 790? When I connect to the machine with the Hyper-V Manager Administrator snap-in, and try to create and run a virtual machine, I get the error "The Virtual Machine could not be started because the hypervisor is not running". I've disabled the Execute Disable functionality in the BIOS as was requried for other Dell models, but no matter what combination of security and virtualization settings I use on the machine, I can't get this working. EDIT: I've installed Windows Server 2008 Core on a Dell Optiplex 790, and I'm trying to install and setup a guest VM on the Hypervisor EDIT 2: The Hyper-V role is installed and configured, without any errors in the event log. Hardware-assisted virtualization is also enabled.

  Read the article

• VB6 network errors Windows 2008 run on ESX VMWare

  - by hivedome

  We have an application built in vb6, the executables for the application are run locally on a Windows 2008 Terminal Server the dll's for the application are located on a network share. Intermittently parts of the application crash with inpage errors.. we realise the .dll it references then copy that dll locally to the windows 2008 server and register the application can then run again alternatly we reboot the server and all ok. ideally we do not want the exec's or dll's on local server, they should be located on network share for other Terminal Servers to access. error values we receive are C0000203 C00000C4 I have disabled windows 2008 UAC and DEP.. Has anyone experienced this type of behaviour in 2008?

  Read the article

• Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

  - by Di

  I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router.All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled.Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this and how do I fix it. Thanks Di

  Read the article

• High RAM usage, not seen in task manager

  - by r4dk0

  Hi! I am using Windows 7 64-bit 7600, with 4Gb of RAM. I have a serious problem, since something uses a lot of RAM(3.94Gb) and I see "stairs" in taskmanager, it rises to +3Gb RAM and it drops to about 2Gb and then rises slowly again, and suddenly drops. I tryed installing this version again and other versions, newer ones, but no effect. Ive even tryed disconnecting other harddrives while I installed it, and then installed NOD32 and updated it. How could I know what is using that much RAM? P.S.: I was suspecting superfetch service, I disabled it, restarted pc, and it didnt work, since the memory is the highest point when I login with password, it is really annoying since I need about 1minute to see my desktop, neither alone try anything else. After loging in it slowly drops and after random time it starts rising again. That doesnt happen immediately after a fresh windows install. And how the drivers go, I tryed older drivers for GPU, and newest ones.

  Read the article

• High RAM usage, not seen in task manager

  - by r4dk0

  Hi! I am using Windows 7 64-bit 7600, with 4Gb of RAM. I have a serious problem, since something uses a lot of RAM(3.94Gb) and I see "stairs" in taskmanager, it rises to +3Gb RAM and it drops to about 2Gb and then rises slowly again, and suddenly drops. I tryed installing this version again and other versions, newer ones, but no effect. Ive even tryed disconnecting other harddrives while I installed it, and then installed NOD32 and updated it. How could I know what is using that much RAM? P.S.: I was suspecting superfetch service, I disabled it, restarted pc, and it didnt work, since the memory is the highest point when I login with password, it is really annoying since I need about 1minute to see my desktop, neither alone try anything else. After loging in it slowly drops and after random time it starts rising again. That doesnt happen immediately after a fresh windows install. And how the drivers go, I tryed older drivers for GPU, and newest ones.

  Read the article

• Good/Better config for MySQL on an EC2 Large Instance

  - by Tim Reynolds

  I have an EC2 Large instance dedicated to MySQL. It will be serving a Joomla/Magento combo so it has a blend of InnoDB and MyISAM tables. I have only worked with MyISAM in the past and am therefore unfamiliar with the settings InnoDB uses. Experiments so far have been less than fruitful, as I keep causing the InnoDB engine to be disabled. My instance is running Ubuntu 10.04 64 bit server edition and has ~7.5G of ram. MySQL is currently using ~0.6% of that, with somewhat poor performance. I would like to configure it to use as much of the system RAM as is reasonable. Testing some settings I learned that the InnoDB logs can't collectively be larger than 4G. Would anyone be able to provide some base InnoDB and MyISAM settings to get my started. Thank you Tim

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >