Search Results

Search found 3500 results on 140 pages for 'plug ins'.

Page 75/140 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• How can I run Ghost from a bootable USB key drive?

  - by Joe Philllips

  I have a laptop that does not have a cd-rom or floppy drive. It is able to boot from USB though. I have a disk image (ghost) of the disk that I need to restore back onto the laptop. I can't find a way to actually run the Ghost utility from a USB key though. I believe the ghost.exe should run from within DOS just fine but I can't seem to create a bootable USB key with DOS on it that allows me to run an EXE. Edit: I managed to find a Ghost utility that I could load from a bootable USB drive. Unfortunately, when I plug in my NTFS external drive (USB), it is not detected.

  Read the article

• VLC 2.0: can't enable UPnP support

  - by Craig

  I'm attempting to use VLC 2.0.1 (Intel 64 bit) to connect to a UPnP server (Serviio 0.6.2 on OS X Snow Leopard). I've tried to enable the feature by right clicking the "Universal Plug 'n Play" node in the LOCAL NETWORK section of the Main Window. While I am able to select 'Enable', the setting doesn't seem to 'stick'. Moreover, UPnP isn't listed in the Playlist Service discovery section of the preferences. The 'Service discovery modules' is currently set to upnp_intel:sap. I am able to connect to the UPnP server with my Samsung TV, so I know that the service works.

  Read the article

• PC doesn't power up anymore

  - by Andrew

  I will tell you the story behind the problem. The computer needed to be reinstalled, it has 2 HDDs so I had to un-plug one to see which is which, to save as much data as possible. After unplugging the first one, it booted with the reinstallation CD, it wasn't the HDD I was looking for so I turned it off and unplugged the other one. After unplugging and turning on, right after booting test, the HDD was turned off, only the CPU fan was working. Turned it off with the power supply's button help, holding the power button didn't do it. And now it doesn't want to turn on anymore. I tried with another test power supply but the result is the same, doesn't want to turn on. Any idea?

  Read the article

• Speakers will not work after I use USB Headset

  - by Josh K

  I am trying to configure my SteelSeries Siberia V2 Frost USB Headset to work with my 2.0 speakers using a jack. My goal is to find a easy way (no restart) to switch playback from my headset and my speakers and vice-versa. If i plug my headset in and make it the default device then restart my application/web page then the sounds works out of headset. If I switch the default to my speakers and restart apps/web pages then sound does not play. I know my speakers are on because if I configure them through windows and test, the sounds play, and sounds also play when I test it through my audio manager. Even if I unplug my headset, I still cannot get sound out of my speakers unless I restart My audio manager is RealTek HD Audio Manager, Windows 7 x64. I have tried the speaker back, usb front. speaker front, usb in front port. I have not tried speaker back, usb back.

  Read the article

• Can't login to SQL Server after moving machine to different office/domain

  - by Dan

  Our company has just been bought and the over the weekend I have brought up the last few machines to plug into their network (they are under a different Windows Domain). The last machine is our Vault system and the SQL Server was using Windows Authentication. I have plugged it into their network and its working fine, but i cannot connect to SQL Server with Management Studio and, I fear, no backup jobs will also be working. When I try to login under Windows Auth, it has the user name of "NEWDOMAIN\Administrator" (greyed out) and then presents a "login failed" message with error code "18456". Can anyone help me with this, or will I just have to reinstall SQL Server, Vault and restore the backup I took before the move?

  Read the article

• Can't find generic USB audio driver for a Samson COU1 USB microphone

  - by user10321

  I am unable to use a Samson USB CO1U microphone on a PC running XP, SP3. When I plug it into the USB port, Windows generates the sound indicating that it has found new hardware, and the green LED on the mic lights. But, it does not work, and the device manager reports that it cannot find a driver after searching. The same mic works on a Vista machine. Samson has no driver on their Web site, and insists that the generic audio driver in Windows should work. (http://www.samsontech.com/PRODUCTS/productpage.cfm?prodID=1810). I cannot find a generic USB audio driver at Microsoft.com. Can anyone help? Larry

  Read the article

• AC/battery laptop issues(not a simple charging fix)

  - by Deric Hatchett

  Is it possible to run a laptop off the battery while the AC is plugged in? I can play games no problem while just the battery is plugged in, but obviously that means I have to let it charge after every hour or so. But, when I plug it in to charge, it can't handle any video games anymore. I thought it was the brick in the power cord going out, but I just bought a new one and it still doesn't work. The specs are actually better than the old cord. I think the problem is an over heating problem in the AC outlet, but if it charges the battery while I play, it would work just fine running solely off the battery.

  Read the article

• Troubleshooting USB Hub on Snow Leopard MacOSX

  - by calmcajun

  I just bought a Belkin F5U701-BLK 7-port USB Hub and when I plug it into my iMac it does not seem to recognize it. Do I need to reboot my machine or install a driver? If I have to install a driver where do I get it from? I tried going to Belkin's website to search for drivers and and support info for the hub but I could not find anything. Edit: The USB hub is powering the other devices but my iMac does not recognize both hard drives.

  Read the article

• Can make the proxy settings invisible when I share my internet connection via wifi?

  - by Neil

  This is probably a long shot... I have an HTC Desire and frustratingly found out after I got it that it doesn't support network proxy settings. We have a wireless network at my office that uses a proxy. My desktop at work runs ubuntu. I was wondering if the following set up would work: Plug a USB Wireless adapter into the desktop that has a working internet connection using the proxy. Setup the wireless adapter as an ad-hoc network Share the internet connection over the ad-hoc network. Make it so that the use of the proxy is invisible to users of the shared network connection. Connect the Android phone to the ad-hoc wireless network and utilise the internet connection. My question is this: Is this possible or should I give up now and not even try? I think I can handle steps 1, 2, 3 and 5. I just have no idea if step 4 even makes sense, let alone is possible. Thanks

  Read the article

• external HDD with SATA & USB interface?

  - by Greg

  Anyone know of an external HDD that would have (in addition to USB) a SATA (eSATA) port/cable? i.e. Brand/Model. Preferably one of the name brands so I have a better change of finding it here or locally if possible. Background - In one location I want to use it is I would like to increase the performance by cabling it directly to the PC SATA port, HOWEVER I don't want to have to open up the PC to do this each time. I was thinking of running a SATA cable out through the PC case so I just plug it directly into the external HDD in question. Perhaps it should be also externally powered too so I don't need to run a power cable out from the PC power supply.

  Read the article

• Mac OS X app window is too large - how can I resize?

  - by Kyle Cronin

  I'm a MacBook user, and when I'm home I plug into a large external monitor to get additional screen space. When I'm on the go I disconnect and use my laptop's built-in display. For the most part this arrangement works very well; however, I occasionally run into an issue where I'll resize an app on the external, causing it to be too large to fit on the built-in screen when I disconnect. Most apps don't have a problem decreasing their height automatically or resizing to fit when I click the green orb, but some (like iTunes) don't want to cooperate. How can I resize apps like iTunes without reconnecting to my external? Here's a screenshot:

  Read the article

• Why does the CPU usage reach 100% when laptop is plugged in?

  - by Mayank

  I have an HP Elitebook 8440p with Windows 7 Ultimate, i7 Processor and 8 GB RAM. For the last couple of days, when I plug-in my laptop for charging, the CPU usage shoots up to 100% and remains there for around 15 minutes. No offending process shows up in Task Manager/Process Explorer but the laptop is practically unusable for that time. The CPU usage becomes normal when I remove the power cord but shoots up again when plugged back. This is happening with different power adapters/wall sockets so it might not be a faulty adapter issue. Why is this happening and any pointer to resolve this issue?

  Read the article

• Motherboard warning lights when plugging in a display port cord to graphics card?

  - by rllr

  Earlier today, my computer spontaneously shut itself off and refused to turn back on. I tested my PSU and it's operating fine. I unplugged everything and let it sit for a while and it started to make a high pitched coil whine/hiss. When I came back an hour later and plugged in only the power cord, it turned on without any issues. After some troubleshooting, I noticed my motherboard (Intel D975XBX2) has a red CPU led and VR led that come on whenever I plug my monitor into my graphics card via display port. DVI does not cause a similar issue. I was running three monitors off the card, so I need both DVI ports and the display port working. Is it likely my graphics card needs to be replaced, or should I be looking elsewhere to resolve this issue?

  Read the article

• SEAGATE Barracuda 7200.11 HDD not running

  - by Dane411

  After a huge research, I'm stuck at the beggining of getting my HDD data back. Whats happening to me is that in the moment when I plug the power wire to my external 1TB SEAGATE Barracuda 7200.11 ST31000333AS HDD Fw LC15, it makes the sound like it's spinning to almost full speed and then shuts down and spins up again, and so on. It's well known that those HDDs have a bad firmware that someday randomly fails. There are like 2 main problems identified, BSY (busy) state, and LBA0 error. Last time I connected it to power nothing happened, it didnt try to start at all, is it that so called bricked state? I guess my HDDs error is the first one, but I dont really know if what I described is that BSY state or not, neither I know how to check it. How could I know it? Thank you so much!

  Read the article

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• Can't find generic USB audio driver for a Samson COU1 USB microphone

  - by marcipollo

  I am unable to use a Samson USB CO1U microphone on a PC running XP, SP3. When I plug it into the USB port, Windows generates the sound indicating that it has found new hardware, and the green LED on the mic lights. But, it does not work, and the device manager reports that it cannot find a driver after searching. The same mic works on a Vista machine. Samson has no driver on their Web site, and insists that the generic audio driver in Windows should work. (http://www.samsontech.com/PRODUCTS/productpage.cfm?prodID=1810). I cannot find a generic USB audio driver at Microsoft.com. Can anyone help? Larry

  Read the article

• Cable installed - now my hub has no connection the router/modem - what do I need to buy?

  - by bcmcfc

  My previous setup was as follows: [modem/router]------[switch]+------ [pc1] +------ [pc2] I've just moved and had cable installed and I no longer have the option of running a lengthy LAN cable from the router to the switch to provide network and internet access to the two PCs. The cable company provided 2 wireless N USB adapters. What do I need to buy to plug into where in order to restore the network to its previous state? PC1 dual boots Windows 7 and Ubuntu 12. PC2 runs Debian 6. Edit: USB adapters - Netgear WNDA3200 Switch - TP-Link TL-SF1008D 8 port Ethernet switch Cabling - various patch cables cat5e rj45 Modem/Router - pretty standard cable company job - wireless Intention is something like- [modem/router] --wifi-- [some-new-hardware or perhaps to pc1] ----[switch]---[pc1/2]

  Read the article

• Computers "applying computer settings" for a long time on start-up...why?

  - by tombull89

  Hello. Might be a bit of a slong shot but I'm stumped, along with the ICT Manager for the school I'm working it. In one of the IT rooms when you switch a computer on it will boot through BIOS fine, but when it gets to "applying computer settings" it can hang for a long time (~15 minutes). If you unplug the computer from the network it starts up fine, gets to the login screen, then you can plug the network cable in and it will work fine. I don't think it's anything to do with the fact we've been coming close to running out of IP addresses or a problem with our DHCP. Microsoft KB says apply the latest service pack, which we've done, and check a service. Servers and domian controllers are S2003, Computers and Desktops are XP. Does anybody have any thoughts on what to try?

  Read the article

• how to restore grub

  - by takeshin

  During copying files via lan my Ubuntu Server 10.04 hung up and I had to reset the computer. After reboot, I got: Grub error 17, so I tried the rescue alternate CD, but I got a info, that no partitions were found on the disk. I used testdisk to restore the partitions. Using fdisk -l shows the partitions now, but when the system boots up I does nothing but displays: L234: When I plug the drive to another computer, it is not automatically mounted and I can't access the data. What to do now? How to restore the grub and boot up the system?

  Read the article

• Is there such a thing as an IP femtocell, and what does it do?

  - by The Journeyman geek

  My dad mentioned a co-worker suggested using a device, that might use CDMA to route calls through IP to save costs on a certain overseas project we're on- since our home base is quite far from there. I've never heard of such a device, so if it does exist, I'm wondering, if it's specific to particular ISPs, or if you can just pick one off the shelf, plug it into an arbitrary Internet connection, and make calls using it and a cellphone of some sort? As you can tell, details are sketchy, so... if such a device doesn't exist, saying so might be a right answer ;)

  Read the article

• VGA no signal on LCD monitor attached to laptop

  - by Paul

  I bought a new Asus vh242h LCD monitor for use with my lenevo T60 laptop running XP professional. Display info under control panel says "Intel(R) 945GM Express Chipset Family". I am connecting via VGA. When I connect the monitor I get "VGA no signal" and the monitor screen stays blank. I have selected the monitor as the display device on the laptop. The information on the monitor displays the correct screen resolution from the laptop, so the monitor is communicating in some way with the laptop. I've successfully tried the monitor with my Dell inspirion 1525 running Windows Vista. I've change the VGA cable to one I know works. Tried different resolutions. I cannot find and specific drivers on the internet for this monitor, so I assume it should work with Plug and Play. Does anyone know what the problem could be?

  Read the article

• Compiling/executing Java on Sublime Text 2 works fine except that it cannot read user input

  - by meiryo

  I am a student learning Java and I want to compile and run some simple Java on ST2. Also Eclipse is very slow on my laptop. Here is my JavaC.sublime-build file so far: { "cmd": ["sublimejavaexec.bat", "$file"], "file_regex": "^(...*?):([0-9]*):?([0-9]*)", "selector": "source.java" } So far it can run code that does not require user input. However when I have something that uses the Java input scanner it either skips through or generates an error. Can anyone suggest a solution such as a plug-in or if ST2 actually has this kind of feature on its console? Thanks.

  Read the article

• A home router for torrents, gaming, webbing and detailed QoS [closed]

  - by Cawas

  I want to plug in an external HD on it to torrent up never ending (mostly for seeding), with lowest priority. It should even automatically completely stop if it disturbs my net usage, and go back in later. And I want to be able to give gaming (or my computer) the highest priority, because of its ping requirements. It should be above even of Skype and any voip, which also have high priority. Web surfing and "youtubing" comes in the middle - it won't matter much if it delays a second or two. Finally, interface as simple as possible. It's fine if it's command line setup, but it needs to have a GUI. What are my options for routers / firmwares as described? Maybe Gargoyle? Or even Time Capsule? It seems to me good old DD-WRT isn't the best option out there anymore. I wonder what else could cover these grounds.

  Read the article

• Remote access not working without connected monitor

  - by winSharp93

  I am trying to configure a Windows Server 2008 as a Home Server for my personal use (mainly for storing documents, hosting source-control, etc.). The "server" consists of an Intel Atom 2700DC board and an Intel SSD. Configuring remote access to the server, I am confronted with a very strange problem: As long as a monitor is connected to my server, remote access works without any problems. However, when no monitor is connected at boot-time, remote access simply won't work (I keep getting errors when trying to connect that the remote server was not found or that remote access is disabled). Windows definitely boots when no monitor is connected as I receive a message asking me whether to enter safe mode when booting after powering the server down by plugging the power cord. When I plug in a monitor after boot, it stays turned off and remote desktop connections still fail. Do you have any ideas about what I could try?

  Read the article

• Set Folder Icon for all Os

  - by Am1rr3zA

  Hi, I want set icon to my folder in My external hard drive but when I change it (by right click on it and -> properties -> customize -> change icon (i address the icon from my extenal hard drive)) it just change in my windows and when plug my extenarnal-hard to another windows it's don't show my icon! how should fix this? P.S: is there a way to set icon for folder show in all os (linux, windows, OSX, ..) note: I don't want set icon to 1 drive I want set icon to all my folder in my drive.

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >