Search Results

Search found 40915 results on 1637 pages for 'property list'.

Page 752/1637 | < Previous Page | 748 749 750 751 752 753 754 755 756 757 758 759  | Next Page >

• What's throttling the database?

  - by Troels Arvin

  Hardware: Intel x86_64 with 192GB of RAM. OS: CentOS 5.4 x86_64. DBMS: DB2 v. 9.7.1 64 bit. During certain special workloads (e.g. parallel REORGs/RUNSTATs), I've seen the server transporting 450MB/s with 25000IO/s (yes, there is probably some storage system caching happening here) while all CPU cores were happily working in an even mix of usermode/wait. And disk benchmark tools can also bring some very satisfying bandwith and IO/s numbers to the table. On the other hand, we also have another scenario: A single rather complex query with at least one large table scan. db2's "list applications" reports that the query is Executing (not locked). IO: At most 10MB/s, 500 IO/s; CPU: two cores in 99.9% wait state, all other cores 100% idle. The tables which the query reads from have been altered to have LOCKSIZE=TABLE, so I would think that lock list work is zero. What's going on in such a situation? What tools/snapshots/... can I use to gain better insight in such a case?

  Read the article

• Why is my global security group being filtered out of my logon token?

  - by Jay Michaud

  While investigating the effects of filtered tokens on my file permissions, I noticed that one of my global security groups is being filtered in addition to the regular system-defined filtered groups. My Active Directory environment is a single-domain forest on the Windows Server 2003 functional level. I'll call the domain "mydomain.example.com". I am logged onto a Windows Server 2008 Enterprise Edition machine (not a domain controller) as a member of the "MYDOMAIN\Domain Admins" group and the "MYDOMAIN\MySecurityGroup" global security group (among others). When I run "whoami /groups" from an elevated command prompt, I see the full list of groups to which my account belongs as expected. When I run "whoami /groups" from a regular, non-elevated command prompt, I see the same list of groups, but the following groups are described as "Group used for deny only". BUILTIN\Administrators MYDOMAIN\Schema Admins MYDOMAIN\Offer Remote Assistance Helpers MYDOMAIN\MySecurityGroup Numbers 1 through 3 above are expected based on Microsoft documentation; number 4 is not. The "MYDOMAIN\MySecurityGroup" global security group is a group that I created. It contains three non-built-in global security groups, and these security groups contain only non-built-in user accounts. (That is, I created all of the accounts and groups that are members of the "MYDOMAIN\MySecurityGroup" global security group.) There are other, similar groups of which my account is a member that are not being filtered out of my logon token, and this group is not granted any specific user rights in the security settings of this computer or in Group Policy. What would cause this one group to be filtered out of my logon token?

  Read the article

• Why is cron mailing me program output even though I've redirected to /dev/null?

  - by Server Fault

  I'm trying to restart a system process through cron and getting emailed the startup output of the process. I thought redirecting STDOUT and SDTERR to /dev/null would "silence" the output but alas, this has not work. How can I get cron to silently restart this service? crontab entry: 0 6 * * * service sympa stop &>/dev/null; service sympa start &> /dev/null sample output from restart email: Stopping Sympa bounce manager bounced ...done. * Stopping Sympa task manager task_manager ...done. * Stopping Sympa mailing list archive manager archived ...done. * Stopping Sympa mailing list manager sympa ...done. ... waiting Prototype mismatch: sub Lock::LOCK_SH () vs none at /home/sympa/bin/Lock.pm line 38. Constant subroutine LOCK_SH redefined at /home/sympa/bin/Lock.pm line 38. Prototype mismatch: sub Lock::LOCK_EX () vs none at /home/sympa/bin/Lock.pm line 39. Constant subroutine LOCK_EX redefined at /home/sympa/bin/Lock.pm line 39. Prototype mismatch: sub Lock::LOCK_NB () vs none at /home/sympa/bin/Lock.pm line 40. Constant subroutine LOCK_NB redefined at /home/sympa/bin/Lock.pm line 40.

  Read the article

• HAProxy crashes on all requests in 1.5-dev12

  - by Daniel Hough

  I'm having an issue where HAProxy is crashing with no explanation when I switch from 1.4.12 to 1.5-dev12. The reason I'm switching is for the SSL offloading. My config file doesn't have any errors, it's quite simple and it works well with 1.4 - but for some reason when I run it with 1.5-dev12 I see the logs noting that the two backends I have have been set up, and then when I hit one of the frontends, I get an HTTP 400 in the browser and suddenly HAProxy isn't running anymore when I check. I understand that a common workaround to the lack of SSL support for HAProxy is to use Stud, and I may go with that since I am in need of an SSL solution for my service, but before I dele into that world I thought I might see if anybody has experienced the same problems and might know how to fix it. The server is Ubuntu 10.04 and I followed the make instructions on the Exceliance blog here. EDIT: On the advice of Kyle Brandt, I did a bit more investigation. I attached gdb to the haproxy process and when the crash occurred this is what I got: Program received signal SIGSEGV, Segmentation fault. 0x0804e5c2 in dequeue_all_listeners (list=0x9e1a418) at src/protocols.c:184 184 list_for_each_entry_safe(listener, l_back, list, wait_queue) { P.S. HAProxy is awesome, so thank you Exceliance for providing us with something so useful :)

  Read the article

• RabbitMQ Management console not working

  - by rrejc

  I have started with RabbitMQ. I have a (windows) machine on which I installed two RabbitMQ nodes as a service - I have choose the nodename, port and service name for each of them. The services are running normally (i see that they are listening in a netstat-a). I have also installed management plugin with "rabbitmq-plugins enable rabbitmq_management" and restarted both services. But the plugin isn't running - I dont see it listening in a netstat and I can't connect to the management console via browser. Any idea what could be wrong? Is there any log to see what is goind on? Updated: when I do rabbitmq-plugins list i get: c:\RabbitMq\sbin>rabbitmq-plugins list [e] amqp_client 3.0.1 [ ] cowboy 0.5.0-rmq3.0.1-git4b93c2d [ ] eldap 3.0.1-gite309de4 [e] mochiweb 2.3.1-rmq3.0.1-gitd541e9a [ ] rabbitmq_auth_backend_ldap 3.0.1 [ ] rabbitmq_auth_mechanism_ssl 3.0.1 [ ] rabbitmq_consistent_hash_exchange 3.0.1 [ ] rabbitmq_federation 3.0.1 [ ] rabbitmq_federation_management 3.0.1 [ ] rabbitmq_jsonrpc 3.0.1 [ ] rabbitmq_jsonrpc_channel 3.0.1 [ ] rabbitmq_jsonrpc_channel_examples 3.0.1 [E] rabbitmq_management 3.0.1 [e] rabbitmq_management_agent 3.0.1 [ ] rabbitmq_management_visualiser 3.0.1 [e] rabbitmq_mochiweb 3.0.1 [ ] rabbitmq_mqtt 3.0.1 [ ] rabbitmq_old_federation 3.0.1 [ ] rabbitmq_shovel 3.0.1 [ ] rabbitmq_shovel_management 3.0.1 [ ] rabbitmq_stomp 3.0.1 [ ] rabbitmq_tracing 3.0.1 [ ] rabbitmq_web_stomp 3.0.1 [ ] rabbitmq_web_stomp_examples 3.0.1 [ ] rfc4627_jsonrpc 3.0.1-git7ab174b [ ] sockjs 0.3.3-rmq3.0.1-git92d4ba4 [e] webmachine 1.9.1-rmq3.0.1-git52e62bc

  Read the article

• Correct use of SMTP "Sender" header?

  - by Eric Rath

  Our web application sends email messages to people when someone posts new content. Both sender and recipient have opted into receiving email messages from our application. When preparing such a message, we set the following SMTP headers: FROM: [email protected] TO: [email protected] SENDER: [email protected] We chose to use the author's email address in the FROM header in an attempt to provide the best experience for the recipient; when they see the message in their mail client, the author is clear. To avoid the appearance of spoofing, we added the SENDER header (with our own company email address) to make it clear that we sent the message on the author's behalf. After reading RFCs 822 and 2822, this seems to be an intended use of the sender header. Most receiving mail servers seem to handle this well; the email message is delivered normally (assuming the recipient mailbox exists, is not over quota, etc). However, when sending a message FROM an address in a domain TO an address in the same domain, some receiving domains reject the messages with a response like: 571 incorrect IP - psmtp (in reply to RCPT TO command) I think this means the receiving server only saw that the FROM header address was in its own domain, and that the message originated from a server it didn't consider authorized to send messages for that domain. In other words, the receiving server ignored the SENDER header. We have a workaround in place: the webapp keeps a list of such domains that seem to ignore the SENDER header, and when the FROM and TO headers are both in such a domain, it sets the FROM header to our own email address instead. But this list requires maintenance. Is there a better way to achieve the desired experience? We'd like to be a "good citizen" of the net, and all parties involved -- senders and recipients -- want to participate and receive these messages. One alternative is to always use our company email address in the FROM header, and prepend the author's name/address to the subject, but this seems a little clumsy.

  Read the article

• What does this error mean in my IIS7 Failed Request Tracing report?

  - by Pure.Krome

  when I attempt to goto any page in my web application (i'm migrating the code from an asp.net web site to web application, and now testing it) .. i keep getting some not authenticated error(s) . So, i've turned on FREB and this is what it says... I'm not sure what that means? Secondly, i've also made sure that my site (or at least the default document which has been setup to be default.aspx) has anonymous on and the rest off. Proof: - C:\Windows\System32\inetsrv>appcmd list config "My Web App/default.aspx" -section:anonymousAuthentication <system.webServer> <security> <authentication> <anonymousAuthentication enabled="true" userName="IUSR" /> </authentication> </security> </system.webServer> C:\Windows\System32\inetsrv>appcmd list config "My Web App" -section:anonymousAuthentication <system.webServer> <security> <authentication> <anonymousAuthentication enabled="true" userName="IUSR" /> </authentication> </security> </system.webServer> Can someone please help?

  Read the article

• Windows 7 logon script net use fails

  - by Bryan

  Our network PCs currently consists of Windows XP Professional on a mixed 2008/2003 domain, with exception to one machine, which is a new Windows 7 PC we have bought for testing before we deploy the operating system. But we have discovered a problem with our logon script which automatically maps network drives for our users. The logon scripts are done via User GPOs, but the script itself is just a .cmd file using net use. The permissions are perfectly fine, as the same user can log on to a Windows XP machine and get their drives mapped without problem, but this one drive mapping constantly fails. This is repeatable using the net use command, and fails every time - it actually prompts the user for a username and password when executed interactively, yet if we enter \\server\share from a run dialog, the contents of the network share appear and are accessible without any further authentication. The Windows 7 PC (just like the XP systems) are domain members and the account being used is a domain account, which does have access to the share (as stated, it works fine on XP). I fail to understand what is happening here, as other shares on the server get mapped on the Windows 7 system. More info: The effective permissions of the share in question only grant the user 'list' permission on the root directory, the share permissions are 'everyone,full control'. I've created a new share with the same permissions just to test if it was down to the 'list' permissions on the root directory, but the Windows 7 machine maps this one fine.

  Read the article

• Computer randomly shuts itself off

  - by Decency

  I have not been able to determine a pattern for why this happens, despite my best efforts. I've attempted to run it on full power with Prime95 and this doesn't trigger a restart. Generally the restarts occur while I'm playing games, watching videos, or even just having multiple tabs open in a browser. However, I often play processor intense games for hours without any restarts occurring, and sometimes they'll happen 3-4 times in an hour during less intense activity, so I don't think that is the problem. I imagine it has something to do with overheating or power consumption so I've been monitoring CPU temperature and cleaning with compressed air, but the problem keeps happening. I don't know how to track power consumption, and assume that this is the problem. Whenever this occurs, the sound gets stuck in a short loop of whatever was playing at the time, though restarts also occur when nothing is playing. Here is a screenshot of temperatures: and under load: Here's the parts list: http://secure.newegg.com/WishList/PublicWishDetail.aspx?WishListNumber=10546754 As shown in the list, the case includes a 585W Power Supply, which I've been told should be plenty. I built the computer myself with a friend's guidance but it's very possible I did something wrong. Right now I'm looking into ensuring that I have the latest drivers for all components. Any help would be appreciated- thanks.

  Read the article

• How to play individual albums in iTunes?

  - by Herb Caudill

  I know of two ways to play one specific album in iTunes: Do a search that's specific enough to include just that album and no other tracks; press a "Play album" button. (Doesn't work in cover flow or list view.) Go to list view; turn on column browser; in View/Column Browser, make sure "Albums" is showing; double-click an album name. These are fine as far as they go, but: Double-clicking an album in cover flow will play the album, and then keep going (in alphabetical order). That's no good. In playlists like "Purchased" or "Recently Added", you can either view and play whole albums, or sort by date added; you can't do both. In general, there's no straightforward way to get from a track in a playlist to the whole album it belongs to. What I would really, really like, would be to right-click on any song or album cover, anywhere, and choose "Play album". While I'm waiting for Apple to add that, any tips for simple album-centric listening?

  Read the article

• Resize a RAID 1 volume on OSX Snow Leopard - how? (Note: software raid)

  - by Emmel

  I've scoured the Internet in search of an answer to this question, and as usual with OSX-related topics, I often don't find any deep-dive technical explanations sufficient enough to feel confident doing dangerous things. Here is my question: I have a Mac Pro, running OSX 10.6.2. I have, as my main root/boot disk, a RAID 1 volume called "Mirror1". Mirror1 is comprised of two 1 TB disks. Mirror1, however, is fixed at 640 GB. That's because, I originally took a 640GB disk, bought a terabyte disk, mirrored it (using diskutil appleraid enable...), when it synced I removed the 640GB and replaced it with a second 1 TB disk, and synced again. Voila! A single 640 GB replaced by two 1 TB disks in a mirror.. Actually, no. There's still something missing from the equation: Mirror1 needs to be expanded from 640GB to 1 TB to match the partition sizes on each of those disks. How do I do this? Perhaps the diskutil output will help: -> diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI 209.7 MB disk0s1 2: Apple_RAID 999.9 GB disk0s2 3: Apple_Boot Boot OSX 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk1 1: EFI 209.7 MB disk1s1 2: Apple_RAID 999.9 GB disk1s2 3: Apple_Boot Boot OSX 134.2 MB disk1s3 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *640.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Mac Disk 2 536.7 GB disk2s2 3: Microsoft Basic Data BOOTCAMP 103.1 GB disk2s3 /dev/disk3 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Mirror1 *639.8 GB disk3 -> diskutil appleraid list AppleRAID sets (1 found) =============================================================================== Name: Macintosh HD Unique ID: 1953F864-B474-4EB6-8E69-41834EBD0247 Type: Mirror Status: Online Size: 639.8 GB (639791038464 Bytes) Rebuild: manual Device Node: disk3 ------------------------------------------------------------------------------- # Device Node UUID Status ------------------------------------------------------------------------------- 0 disk1s2 25109BAE-5697-40EA-B612-0217851444F7 Online 1 disk0s2 11B83AB0-8148-4DB6-8761-DEF08C855F8D Online =============================================================================== Thanks in advance.

  Read the article

• Network Sharing Issues

  - by Mark Kramer

  I have two computers I want to have on a network share together (so the laptop can print through the desktop's printer). These are both connected to the same router. (One wired and one wireless) And they both have the same workgroup name. However, when I type "net view" in the command prompt, the only computer that shows up is the computer I type the command into. How do I get these computers to be shared with each other? Update: The tower is running Windows XP, the Laptop is running Windows 7. I have disabled the Firewall on both until I get this set up. Update 2: Typing the command net view on my desktop is acting very strangely. Noe sometimes it only shows itself on the list of computers, sometimes it shows itself and the laptop and sometimes it doesn't work at all and displays system error 6118. I typed net view into the command prompt on the Windows 7 laptop and both computers showed up, so I went to connect to the desktop from the laptop and it said the dekptop could not be found, even though it is showing up int he list of shared computers. Here are supporting pictures (these are coming from the laptop)

  Read the article

• I need to take the first three letters of a filename and set it into a text file, in a certain fashion. How can I do this?

  - by JuniorD

  Okay, so I need to take the first three letters of a file from a list of files, and place this into a text file in a certain manner. I will provide examples below. Lets say that I have two file names in the same directory, one called cougar.txt and the other bear.txt. These are in the animals directory. I need to take the first three letters of these words, and transpose them into a text file along with the directory, in the following format: BEA = "animals/bear.txt" COU = "animals/cougar.txt" This should happen with any random thing that might be in the list. I'm fairly new to this sort of coding, so I'm not quite sure which language to use, and I'm learning as I go. This new challenge seems fairly daunting to me, and I would be much appreciated if you guys could help. Also, I'm using Windows 7. Been attempting at this all day, to no avail. Preferably done in batch, but if that is impossible I'm open to recommendations.

  Read the article

• Cisco IOS ACL: Don't permit incoming connections just because they are from port 80

  - by cjavapro

  I am going much based on my memory and I may not be correct on all of this. On a Cisco 851 (IOS) that uses a BVI or a bridge-route (the servers on the inside are configured with static and public IP addresses). I would apply two access lists (both end with deny ip any any log) on FastEthernet4 (the WAN port). There would be one for FA4 in and another for FA4 out. FA4 out would have a line like access-list 110 permit 98.76.54.0 0.0.0.255 gt 1023 any eq http I think this means from 98.76.54.* with a from port of at least 1024 can connect to any other machine with a destination port 80. So, then I have to allow the response to the HTTP connection. FA4 in would have a line like access-list 120 permit any eq http 98.76.54.0 0.0.0.255 gt 1023 Now the problem with that is that anybody on the outside can set their from port to port 80 and then connect to any inside port that is at least 1024. How do we prevent this and require the incoming data to be a response to the outgoing data.

  Read the article

• Windows Search not searching in files

  - by Cylindric

  I am trying to get Windows Search to work on my Windows Server 2008 SP2 fileserver, so I can search in files for content. I have added the Windows Search Service role to the server, and using the right-click properties in Explorer set some folders to "Index this location". The problem is that neither on the server or remotely can I search in the files. I seem to get some inconsistencies in the GUIs, for example the "Indexing Options" panel shows me just 6 locations indexed, but if I click "Modify" I see nearly everything ticked. For example, the "SeachTest" folder under "infrastructure" has the "index this location" option ticked, but the "Projects" folder does not. I assume this is why some are grey and some not, but they are all ticked. T The "SearchTest" folder contains some files that have nothing but the text PurpleOrange in it, so I should be able to find those. So, to summarise: Which locations are indexed? The ones in the "Index these locations" list, the ones ticked, or the ones not greyed-out in the list? How do I get to the state where I can click in the search box and type PurpleOrange and see the files?

  Read the article

• java warnings on linux

  - by Geo Papas

  Hello i am getting warnings after i have installed java on kubuntu 11.10. The java programs run but i always get 4 warnings: $ java Warning: no leading - on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' Warning: missing VM type on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' Warning: no leading - on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' Warning: missing VM type on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' What am i missing? Thanks in advance! Here is the file content /usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg : /usr/lib/jvm/java-6-sun # # %W% %E% # # Copyright (c) 2006, Oracle and/or its affiliates. All rights reserved. # ORACLE PROPRIETARY/CONFIDENTIAL. Use is subject to license terms. # # List of JVMs that can be used as an option to java, javac, etc. # Order is important -- first in this list is the default JVM. # NOTE that this both this file and its format are UNSUPPORTED and # WILL GO AWAY in a future release. # # You may also select a JVM in an arbitrary location with the # "-XXaltjvm=<jvm_dir>" option, but that too is unsupported # and may not be available in a future release. # -server KNOWN -client IGNORE -hotspot ERROR -classic WARN -native ERROR -green ERROR

  Read the article

• Why are all of my ZFS snapshot directories empty?

  - by growse

  I'm running an Oracle 11 box as a ZFS storage appliance, and I'm taking regular snapshots of the ZFS filesystems, via cron. In the past, I know that if I wanted to grab a particular file from a snapshot, a read-only copy was kept in .zfs/snapshot/{name}/ and I could just navigate there and pull the file out. This is documented on Oracle's website. However, I went to do this the other day, and noticed that the ZFS directories within the snapshot directories are all empty. zfs list -t snapshot correctly shows the list of snapshots that should be present, and .zfs/snapshots correctly contains a directory for each snapshot, and in each snapshot there is a directory present for each ZFS filesystem. However, these directories appear to be empty. I just tested a restore by touching a file in a little-used share and rolling back to the latest hourly snapshot, and this appears to have worked fine. So the rollback functionality is there. Did Oracle change how snapshots are done? Or is something seriously wrong here?

  Read the article

• MySQL Tables Missing/Corrupt After Recreation

  - by Synetech inc.

  Hi, Yesterday I dumped my MySQL databases to an SQL file and renamed the ibdata1 file. I then recreated it and imported the SQL file and moved the new ibdata1 file to my MySQL data directory, deleting the old one. I’ve done it before without issue, however this time something is not right. When I examine the (personal, not MySQL config) databases, they are all there, but they are empty… sort of. The data directory still has the .ibd files with the correct content in them and I can view the table list in the databases, but not the tables themselves. (I have file-per-table enabled, and am using InnoDB as default for everything.) For example with the urls database and its urls table, I can successfully open mysql.exe or phpMyAdmin and use urls;. I can even show tables; to see the expected table, but then when I try to describe urls; or select * from urls;, it complains that the table does not exist (even though it just listed it). (The MySQL Administrator lists the databases, but does not even list the tables, it indicates that the dbs are completely empty.) The problem now is that I have already deleted the SQL file (and cannot recover it even after scouring my hard-drive). So I am trying to figure out a way to repair these databases/tables. I can’t use the table repair function since it complains that the table does not exist, and I can’t dump them because again, it complains that the tables don’t exist. Like I’ve said, the data itself is still present in the .ibd files and the table names are present. I just need a way to get MySQL to recognize that the tables exist in the databases (I can find the column names of the tables in question in the ibdata1 file using a hex-editor). Any idea how I can repair this type of corruption? I don’t mind rolling up my sleeves, digging in, and taking a bunch of steps to fix it. Thanks a lot.

  Read the article

• Is there any reason this cronjob would fail in cron, but not on the command line?

  - by Treffynnon

  I have written a little one liner that will email me when a list of files changes - I used sha512 to generate a list of hashes and then periodically check that those hashes still match. */5 * * * * /usr/bin/sha512sum --status -c /sha512.sumlist && echo "Success" > /dev/null || echo "Check robots.txt and index.html in /var/www as staging sites are now potentially exposed to the world and the damned googlebot" | /usr/bin/mail -s "Default staging server files have changed" [email protected] It works fine on the command line with: /usr/bin/sha512sum --status -c /sha512.sumlist && echo "Success" > /dev/null || echo "Check robots.txt and index.html in /var/www as staging sites are now potentially exposed to the world and the damned googlebot" | /usr/bin/mail -s "Default staging server files have changed" [email protected] As soon as I run it as a cronjob though it emails every time it runs with the failure message instead of only when the sha512sum check should fail. Is there something silly I have missed in a rush? I forgot to mention that I am running an Ubuntu machine.

  Read the article

• postfix email gateway

  - by k-h

  I am setting up a postfix email gateway. It will not hold any mail but will accept email for my domain and forward it to another internal mailserver and relay mail out from the internal server. One of the main problems is that I am working on a live running system and this will be an upgrade so I am using a test domain which I will change at some point to the real domain. I tried various methods but found the simplest way (that worked) was to use a script to create an aliases file (from ldap entries). There are various problems with this method. The main one being that the entries can't be of the simple form [email protected] because the gateway doesn't know where to send them. They have to be of the form: [email protected]. What I would like doesn't seem hard but I can't get my head around the postfix documentation. There seem to be various ways but none of them seem to work. Most of the examples I have found on the web assume the mail is going to end up on the server. I want a list of users somewhere, preferably of the form: user1, user2, etc rather than [email protected] (I can easily generate this list) and I would like postfix to forward all email to example.com to a particular server: ie realmailserver.example.com. Can anyone suggest clues as to how I might do this?

  Read the article

• rsync --remove-source-files but only those that match a pattern

  - by Daniel

  Is this possible with rsync? Transfer everything from src:path/to/dir to dest:/path/to/other/dir and delete some of the source files in src:path/to/dir that match a pattern (or size limit) but keep all other files. I couldn't find a way to limit --remove-source-files with a regexp or size limit. Update1 (clarification): I'd like all files in src:path/to/dir to be copied to dest:/path/to/other/dir. Once this is done, I'd like to have some files (those that match a regexp or size limit) in src:path/to/dir deleted but don't want to have anything deleted in dest:/path/to/other/dir. Update2 (more clarification): Unfortunately, I can't simply rsync everything and then manually delete the files matching my regexp from src:. The files to be deleted are continuously created. So let's say there are N files of the type I'd like to delete after the transfer in src: when rsync starts. By the time rsync finishes there will be N+M such files there. If I now delete them manually, I'll lose the M files that were created while rsync was running. Hence I'd like to have a solution that guarantees that the only files deleted from src: are those known to be successfully copied over to dest:. I could fetch a file list from dest: after the rsync is complete, and compare that list of files with what I have in src:, and then do the removal manually. But I was wondering if rsync can do this by itself.

  Read the article

• Google Apps Domain Level Shared Contacts?

  - by dkirk

  My firm just switched to Google Apps Premiere addition 2 weeks ago and aside from the way Google handles shared contacts, things are going quite well. Previously, on our Exchange server we had numerous shared contact lists set up in the shared folders. We had a separate list for vendors, sales agents, etc.. Is there not a way to set up lists or groups such as this on the domain level in Google Apps? I have found a ton of forums with users asking the same question but no good answers unless you purchase some third party app in the marketplace. I have toyed around with the "google-shared-contacts-client" here: http://code.google.com/p/google-shared-contacts-client/ and this almost does it but it falls short when trying to group contacts on the domain level or when trying to search for a contact by company name. Are either of these things possible? I am now looking to create a Google Doc spreadsheet to share with the domain just to have a separated defined list of contacts that is search-able by various fields... Anyone who could shed some light on domain level contact sharing relating to the points above, I would be most grateful...

  Read the article

• Problems in Table of Contents formatting

  - by ChrisW

  Two questions about captions in Word (they are related, hence the same post): Using Word 2010 (and its inbuilt equation editor) I've got figure captions which contain equations (well, actually, they represent chemical equations, such as nitrate, for which the correct representation is NO3- where the 3 is subscript and the - is superscript, but in the same column). However, when I generate a figure list, the equation displays as NO3- (with no subscript or superscript) - Word knows it's an equation though (the Equation Tools design ribbon/tab is displayed when I click on the NO3-). I've tried changing it from Professional to Linear and similar other obvious options, but still can't get it to display correctly. File to show this problem in action: http://dl.dropbox.com/u/101867759/EqtnTest.docx - note how the (chemical) equation for nitrate is rendered correctly in the 'caption' on Page 2, but not in the ToC on page 1. I have another caption where the whole figure is included in my list of figures. When I double click on the caption in my text, the caption is highlighted (as expected), but so is the figure (this doesn't happen with any of my other figures) so I assume that the figure has been 'linked' in some way to the text - how do I remove this link?

  Read the article

• Best solution top keep data secure

  - by mrwooster

  What is the simplest and most elegant way of storing a small amount of data in a reasonably secure way? I am not looking for ridiculous levels of advanced encryption (AES-256 is more than enough) and I am only looking to encrypt a small number of files. The files I wish to encrypt are mostly comprised of password lists and SSH keys for servers. Unfortunately it is impossible to keep track of ever changing passwords for my servers (and SSH keys) and so need to keep a list of the passwords. Obviously this list needs to be secure, and also portable (I work from multiple locations). At the moment, I use a 10MB encrypted disk image on my mac (std .dmg AES-256) and just mount it whenever I need access to the data. To my knowledge this is very secure and I am very happy using it. However, the data is not very portable. I would like to be able to access my data from other machines (especially ones running linux), and I am aware that there are quite a few issues trying to mount an encrypted .dmg on linux. An alternative I have considered is to create a tar archive containing the files and use gpg --symmetric to encrypt it, but this is not a very elegant solution as it requires gpg to be installed on every system. So, what over solutions exist, and which ones would you consider to be the most elegant? Ty

  Read the article

• Formatting not retained in paste from Ditto (clipboard manager). Plain text pasted instead [Solved] Add supported types

  - by Jeff Kang

  I'm trying to use Ditto on the Ditto documentation. If I were to copy the table of contents, then paste it (without Ditto) to the word processor, I get http://i.imgur.com/V1GU3.png, and the formatting is maintained. As as a result of the copy operation, the table of contents also goes into the Saved Items List (= History List = Lists the Clips saved from the Clipboard) in Ditto’s Main Window: I open a blank document to paste from Ditto instead of the default clipboard, and press either Ctrl-`, the default Ditto window activation Global Hot Key, or click the tray icon. From this point, I can do 3 things to close the Ditto window, and place the item on the clipboard (the default clipboard?). Select the item, and press Enter Put the cursor on the item, and double-click Select the item, and press Ctrl-c 1) and 2) send a right-click where the cursor is, after the Ditto window closes (presumably to have the paste option ready to access?): Ctrl-c just closes the Ditto window. Whichever method is used, the contents are pasted in what I believe is plain text: http://i.imgur.com/mQAZH.png How do I keep the formatting that the default clipboard keeps? Thanks.

  Read the article

< Previous Page | 748 749 750 751 752 753 754 755 756 757 758 759  | Next Page >