Search Results

Search found 21884 results on 876 pages for 'external address'.

Page 755/876 | < Previous Page | 751 752 753 754 755 756 757 758 759 760 761 762  | Next Page >

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • How to play WAV file through Network Paging Interface

    - by BGM
    In our building we have a Viking Paging ZPI-4 Interface for our intercom. The interface receives data from our Asterisk Phone system via a Cisco SPA112 Port Adapter which has it's own IP address on the network and converts digital into analog. Asterisk plays the "5" tone and then allows the user's voice to commence over the connection. Now, what I want to do is to play a wav file over this Viking Paging device using the Cisco Port Adapter. I know how to get Asterisk to do it, but I want to do this without Asterisk. I want some kind of program that can talk to the Cisco Port Adapter and then transmit the wav file into the Viking Paging Device. What kind of program do I need to get or make? Now, I found this link if it helps anyone with ideas. I also found this information, but I'm not sure how to apply it. I also found this, but it involves an arduino. However, I already have the analog-to-digital convertor, and the Viking will handle sending sound over the paging speakers. I just need to know how to send the wav file to the Viking via the Port Adapter. So far, I know my wav file should be formatted as 8bit mono, and I need to send the "5" tone to open the Viking Pager's channel. [update] I am trying to figure out if I can use VLC player to stream to the ipaddress of the Port Adapter. So far I'm not having success with that, and don't even know if it will work. Windows Media Player has a streaming option too. I am thinking that since the Cisco Port Adapter thinks it is a sort of phone, that the only way this can be done is via SIP.

    Read the article

  • What are the requirements for Windows Remote Assistance over Teredo?

    - by Jens
    I try to get the Windows 7 (or Vista) remote assistance feature to work, without using UPnP on the novices computer. After enabling Teredo on the expert's computer (that is in a corporate network, and therefore has teredo disabled by default), I tried to connect to the novice both using Easy Connect and the invitation file with no success. My triubleshooting included the following (so far). A connection to the novice from my home pc was successful, hinting at a misconfiguration on the experts side. Both computers have a "qualified" connection to the Teredo Server. Both computers have a valid Teredo IP, access to the Global_ PNRP cloud and can resolve names registered with PNRP on the other computer. The expert can resolve the PNRP Id automatically generated with an Easy Connect help request Both computers can ping the other's PNRP name. Both computers can ping the other's Teredo IP Address using ping -6 Now, I am a little stumped. I expected Remote Assistance to work at this point, since my corporate firewall has no Teredo filtering. What could RA cause not to work in this setting? Thanks in advance!

    Read the article

  • Issues with VPN functionality

    - by Xorandor
    I've been working on setting up VPN connectivity to our office location. We bought a Cisco WRV210 which have a builtin VPN server. Cisco has some software QuickVPN, which is not as quick and easy as I had thought. I've had mixed experiences on different machines with connecting. Instead I configured an IPSec VPN tunnel following a guide from TheGreenBow here http://www.thegreenbow.com/doc/tgbvpn_cg_linksys_wrv200_en.pdf I followed their instructions and tried out an evaluation of their software, and VPN connection should be working ok. I'm able to do RDP to a machine on the network (using IP address, not machine name) and ping the router etc. What I'm trying to solve are two things: It's not like I'm "really" on the network. Or at least I'm restricted to some degree when going through the VPN. I can't access a machine on the network using machine name, only IP. I can't ping a machine, but the router just fine. Could this be that something is not set up properly? If so, I can ofcourse supply additional information. Second, when I log onto the VPN, I would really like my outgoing connection to go through the internet connection of the remote location. Basically if I connect to the VPN I want my outgoing IP to be that of the remote location's (needed for some IP resctrictions on some of our servers). At a previous work location it worked like this when we connected to our office VPN over PPTP and the builtin windows VPN client. I'm not a huge expert on the topic, so any hints will be appreciated.

    Read the article

  • Copy UNC network path (not drive letter) for paths on mapped drives from Windows Explorer

    - by Ernest Mueller
    I frequently want to share network paths to files with other folks on my team via email or chat. We have a lot of mapped drives here, both ones we set up ourselves and ones set up by our IT overlords. What I'd like to be able to do is to copy the full real path (not the drive letter) from Windows Explorer to send to folks. Example: I have a file in my "Q:" drive, \cartman\users\emueller, I want to send a link to file foo.doc to everyone. When I copy the file path (shift+right click, "copy as path") it gets the file name "Q:\foo.doc". This is unhelpful to others, who would like to see \cartman\users\emueller\foo.doc, obviously. In Explorer it clearly knows it - in the address bar I see "Computer - emueller (\cartman\users) (Q:) -". Is there a way to say "hey man copy that path as text with the \cartman\users\emueller not the Q: in it?" I know I could just set up mapped network locations instead of the mapped drives for the ones that I set up personally and avoid this problem, but most of the mapped drives like the "users" share come from our IT policy. I could just make a separate network location and then ignore my Q: drive but that's inconvenient (and they do it so they can move accounts across servers). Sure my emailed path might eventually break because I'm losing the drive letter indirection but that's OK with me.

    Read the article

  • Postfix message ID originating process?

    - by Anders Braüner Nielsen
    Last night my postfix mail server(Debian Squeeze with dovecot, roundcube, opendkim and spamassassin enabled) started sending out spam from a single domain of mine like these: $cat mail.log|grep D6930B76EA9 Jul 31 23:50:09 myserver postfix/pickup[28675]: D6930B76EA9: uid=65534 from=<[email protected]> Jul 31 23:50:09 myserver postfix/cleanup[27889]: D6930B76EA9: message-id=<[email protected]> Jul 31 23:50:09 myserver postfix/qmgr[7018]: D6930B76EA9: from=<[email protected]>, size=957, nrcpt=1 (queue active) Jul 31 23:50:09 myserver postfix/error[7819]: D6930B76EA9: to=<[email protected]>, relay=none, delay=0.03, delays=0.02/0/0/0, dsn=4.4.2, status=deferred (delivery temporarily suspended: lost connection with mta5.am0.yahoodns.net[66.196.118.33] while sending RCPT TO) The domain in question did not have any accounts enabled but only a catchall alias set through postfixadmin - most emails were send from a specific address I use frequently but some were also sent from bogus addresses. None of the other virtual domains handled by postfix were affected. How can I find out what process was feeding postfix/sendmail or more info on where they originated? As far as I can tell php mail() wasn't used and I've run several open relay tests. I did a little tinkering(removed winbind from the server and ipv6 addresses from main.cf) after the attack and it seems to have subsided but I still have no idea how my server was suddenly sending out spam. Maybe I fixed it - maybe I didn't. Can anyone help figuring out how I was compromised? Anywhere else I should look? I've run Linux Malware Detect on recently changed files but nothing found.

    Read the article

  • few basic questions on webhosting (namservers & dns records)

    - by claws
    I bought a domain name on name.com & I want to use free webhosting on 110mb.com By default name.com integrates services of Google apps. Name server entries are ns1.name.com ns2.name.com ns3.name.com ns4.name.com When I registered on 110mb.com it gave me two addresses ns1.110mb.com ns2.110mb.com This is where I'm lost. The concept is that "Domain name should point to an address of the server where the website is hosted" right? Then why are these 4 entires by default. How exactly is it working? should I remove these 4 and then add 110mb.com servers or just append 110mb.com server addresses to name.com ones. I would like to use google apps. If I change these name server addresses would that remove google apps? I especially want to use email service of google. And I really don't understand what is CNAME, MX, or something something. I want to learn about these stuff & how it exactly works. When I search for webhost tutorial. I'm unable to find any fruitful results.

    Read the article

  • Wireless does not work on Ubuntu 9.04

    - by Yongwei Xing
    Hi all I install the Ubuntu 9.04 my old Lenovo Y520 laptop, the wirless does not work.My Wireless card is Intel Pro/wireless 2100 card. But I can not enable it. My wired card is working well. Does anyone meet it before. the ifconfig output is eth0 Link encap:Ethernet HWaddr 00:0a:e4:5f:6c:30 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:973 errors:0 dropped:0 overruns:0 frame:0 TX packets:1025 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:574701 (574.7 KB) TX bytes:169249 (169.2 KB) Interrupt:10 eth1 Link encap:Ethernet HWaddr 00:0c:f1:58:79:b5 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:10 Base address:0x8000 Memory:d0202000-d0202fff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) the output of iwconfig is eth1 unassociated ESSID:off/any Nickname:"ipw2100" Mode:Managed Channel=0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:off Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I have another question. When my OS is 9.04, there is a icon about network connection on the panel at the top. After I upgraded to 9.10, that icon disappeared. How can I get that back? Best Regareds,

    Read the article

  • Set up multiple websites on a local web server

    - by mickburkejnr
    I have spent the last few days setting up a CentOS 6 server on my local network so that I can host multiple projects that I'm currently working on. Everything has been set up so that I access the server by typing 192.168.1.10 and the Apache test page comes up. What I'm aiming to do is to access different projects by typing in 192.168.1.10/project, and then view the project as if it was on it's own standalone server. I have thought about just sticking these sites inside folders on the server then accessing them that way, but a lot of my projects use CakePHP so this isn't feasible. So what I need to do is create VirtualHosts in Apache to allow me to do this, but without using a domain name. I want to stick to using the IP address of the machine (which is static). Any ideas? EDIT I've followed Peter's suggestion, but now I have a new problem. In the httpd.conf file I have entered the following information: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /www/html/project1 ServerName local.project1.com ErrorLog logs/local.project1.com-error_log CustomLog logs/local.project1.com-access_log common </VirtualHost> And now Apache is saying: Starting httpd: Warning: DocumentRoot [/www/html/project1] does not exist When it clearly does exist. I've disabled SELinux and I can confirm this isn't turned on. I've also checked the ownership of the folder, and its owned by root. I can also save files to these folders using a guest FTP account (which isn't associated to root), so the folders are being listed and can be written to. But when I try the folder in a web browser it doesn't seem to work either. I've also done a reboot of the server and the problem persists. What should I change in order to resolve this?

    Read the article

  • SubDomain creation issue.Ubuntu 12.04 Apache 2.22 Webmin

    - by anarchos78
    I have a technical question concerning subdomains. My installation is UBUNTU 12.04 and WEBMIN for administration (using Apache web server). I am trying to create a subdomain to one IP (the domain is www.ithemis.gr and I want to create test.ithemis.gr and/or test1.ithemis.gr) with no success. I think I've tried the right way to set subdomains. The address does not resolving (I have already created DNS records via BIND). Do you have any suggestions? I am very new in server administration. Any help will be greatly appreciated! Apache configuration: In /etc/apache2/sites-available: Conf file:www.ithemis.gr.conf (main website) <VirtualHost 184.171.255.110:80> DocumentRoot /home/ithemis.gr ServerName www.ithemis.gr <Directory "/home/ithemis.gr"> allow from all #Options +Indexes Options +Includes -Indexes </Directory> </VirtualHost> Conf file:www.test.ithemis.gr.conf (subdomain website): <VirtualHost *:80> DocumentRoot /home/test.ithemis.gr ServerName test.ithemis.gr <Directory "/home/test.ithemis.gr"> allow from all Options +Indexes </Directory> </VirtualHost> My DNS records: Master Zone: ithemis.gr Name Type TTL Values ithemis.gr. NS Default ns1.themis.gr. ithemis.gr. A Default 184.171.255.110 ns1.ithemis.gr. A Default 184.171.255.110 ns2.ithemis.gr. A Default 184.171.255.110 mail.ithemis.gr. A Default 184.171.255.110 www.ithemis.gr. CNAME Default ithemis.gr. ithemis.gr. MX Default 5 mail.ithemis.gr. www.test.ithemis.gr. CNAME Default ithemis.gr. test.ithemis.gr. CNAME Default ithemis.gr.

    Read the article

  • Desktop Provisioning for a Small Linux Software Development Team

    - by deakblue
    Goal: Get a small team using a standard development image rather than 4 software devs setting up their own environments. Why: it takes a day or days to install a distro, build-specific libraries, tools like editors and IDEs, mysql, couchdb, java, maven, python, android-sdk, etc. It's a giant PITA that when repeated 4 times by 4 developers (not sys admins) wastes time and generates annoying divergences that crop up later (it-builds-on-my-box syndrome). There's no sharing of productivity, settings, tricks, scripts, set-ups. Some of this is helped by segregating the build systems into headless virtualbox images. This doesn't really address tooling though or the GUI-desktop dev that needs doing. So I see three basic strategies, ghosting, virtualization, and finally creating a kind of in-house linux distro (I guess Google does something like this). The target dev environment is based on Debian OpenBox and must allow a mix of 3rd gen Core i7 notebooks 8GB-minimum to work both single and multihead. Important, the lappies are not the same, but a mix of 2012 macbooks and PCs. So: virtualization: is doing all of your work within a VM, like VirtualBox, practical on this hardware or annoying. ghosting: will laptops from different manufacturers make this impractical. DIY distro: short of scripting a bunch of package installs, I don't know if there's any "distro-maker" that could keep this from being an epic project of scripting package installs. So any advice?

    Read the article

  • Encrypting peer-to-peer application with iptables and stunnel

    - by Jonathan Oliver
    I'm running legacy applications in which I do not have access to the source code. These components talk to each other using plaintext on a particular port. I would like to be able to secure the communications between the two or more nodes using something like stunnel to facilitate peer-to-peer communication rather than using a more traditional (and centralized) VPN package like OpenVPN, etc. Ideally, the traffic flow would go like this: app@hostA:1234 tries to open a TCP connection to app@hostB:1234. iptables captures and redirects the traffic on port 1234 to stunnel running on hostA at port 5678. stunnel@hostA negotiates and establishes a connection with stunnel@hostB:4567. stunnel@hostB forwards any decrypted traffic to app@hostB:1234. In essence, I'm trying to set this up to where any outbound traffic (generated on the local machine) to port N forwards through stunnel to port N+1, and the receiving side receives on port N+1, decrypts, and forwards to the local application at port N. I'm not particularly concerned about losing the hostA origin IP address/machine identity when stunnel@hostB forwards to app@hostB because the communications payload contains identifying information. The other trick in this is that normally with stunnel you have a client/server architecture. But this application is much more P2P because nodes can come and go dynamically and hard-coding some kind of "connection = hostN:port" in the stunnel configuration won't work.

    Read the article

  • Very slow connection to xserve via afp or smb

    - by Mhoffman13
    Help. File transfer and connection speed to our Xserve are painfully slow from newly purchased iMacs. The Xserve is only used as a file server, its running 10.4.11. The problem seems to be only happening on brand new iMacs running 10.6.3. When connected either over afp or smb copying files is many times slower than usual. Other machines on the network running either 10.4 or 10.5 have a normal connection speed. To try to rule out OS incompatibility I connected the new iMac running 10.6 to another computer running 10.4 over the network. The file transfer speed was fast as normal. So it seems the problems lies with the X serve (maybe). The afp logs either access or error don't show anything unusual. One thing that did look different was when the imac was connected to the Xserve the user had its id listed as its IP address. The other machines connected, had the id of broadcasthost. I also noticed that when connected from the new iMac I can only see one of the mirrors. When any other computer connects both mirrors are shown. Tried a restart of the Xserve but the problem persists. Thanks in advance for any advice

    Read the article

  • Mounting any Windows share from OS X 10.7.5 suddenly stopped working

    - by user2169619
    I have problem with mounting Windows network shares from my OS X 10.7.5 - it worked but it stopped and nothing helps and nothing in logs. Here what I get when trying to mount it manually: mount -t smbfs //10.0.0.7/d /tmp/test When doing sniffing with tshark - no packet it sent through and I get immediately return from the command: mount_smbfs: server connection failed: Unknown error: -1 Nothing in /var/log/syslog.log and /var/log/kern.log. The Finder does not work either - it throws an error that something is wrong (in czech thus I'm not sending the message here). I just cannot connect to any network shares. In virtual Windows 7 in Parallels Desktop I can connect successfully, but not within the network share (so the Win7 is behind OS X NAT) but only with its own IP address. The Windows server share is on the same network segment connected through switch. Any advice how to debug and what can be wrong? I spent hours to find solution on Google and here but no-one with this kind of problem and I do not know how to further debug it since there is no meaningful log / trace etc. I can ping 10.0.0.7 and I can connect to FTP server on 10.0.0.7 - the Windows machine (XP) has firewall completely turned off. The problem is that with tshark, I'm not seeing any packet sending to 10.0.0.7 so it's not even trying to reach the server.

    Read the article

  • EC2 instances keep becoming inaccessible via SSH, can I use elastic loadbalancer to check SSH connectivity?

    - by Rick
    This is mainly an issue for my development ec2 server as it seems that my instance keeps becoming inaccessible via SSH. It happened yesterday so I killed that one and started a new one and happened again later today. The server still works, my web application is accessible in a web browser but whenever I try to connect via SSH I get a pemrission denied (public key) error message in my terminal. I am 100% sure I am doing nothing wrong as I can create a new instance of the exact same AMI (its a personal custom AMI), change absolutely nothing, including using the same .pem key, and then am able to SSH into that new instance using the exact same command as before (just changing the IP address). I understand that ec2 can have issues but having this happen every day seems a bit odd.. I am using an m2.xlarge instance so I don't know if these tend to be unstable, in the past I have used a small instance and had it running for months with no problems which is why I find this so odd. I am looking into using loadbalancing but it seems the only "health" checks they offer is for http or tcp so I'm not sure if I can make it monitor for SSH connectivity. This is important for development as I may make 1-2 new pushes of an application a day and use SSH to do this. I have a designer that needs to have the app always accessible as he works with the front-end files to test output with the live application. Anyways, any advice / info is appreciated

    Read the article

  • TC hashing filters - single rule deletion

    - by exa
    For traffic shaping I'm currently using a setup that looks exactly like the setup from LARTC, on this page: http://lartc.org/howto/lartc.adv-filter.hashing.html I have a simple problem with that - everytime I want to modify something in the hash table (like assign a IP to different flowid), I need to delete the whole filter table and add it again filter by filter. (I actually don't do it by hand, I have a nice program that does it for me... but still...) There is a problem - I got roughly 10k filters allocated this way and deleting and refilling the whole filtertable can get pretty lengthy, which is not exactly good for traffic shaping. My program could easily manage to delete only the rules that need to be deleted (thus reducing the whole problem to several commands and miliseconds), but I simply don't know the command that deletes only the one hashing rule. My tc filter show: filter parent 1: protocol ip pref 1 u32 filter parent 1: protocol ip pref 1 u32 fh 2: ht divisor 256 filter parent 1: protocol ip pref 1 u32 fh 2:a:800 order 2048 key ht 2 bkt a flowid 1:101 match 0a0a0a0a/ffffffff at 16 filter parent 1: protocol ip pref 1 u32 fh 2:c:800 order 2048 key ht 2 bkt c flowid 1:102 match 0a0a0a0c/ffffffff at 16 filter parent 1: protocol ip pref 1 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 1 u32 fh 800::800 order 2048 key ht 800 bkt 0 link 2: match 00000000/00000000 at 16 hash mask 000000ff at 16 The wish: 'tc filter del ...' command that removes only one specific filter (for example the 0a0a0a0a IP match (IP address 10.10.10.10)). Removal of some small subgroup would also be good - for example I could still recreate a bucket (bkt a) pretty fast. My attempts: I tried to number all the filters using prio, but with no help -- they just create something unusuable (but deletable) below, but the bucketed filters remain there after that gets deleted. Any ideas? edit - I'm adding a simplified tl;dr description of the problem: I created hash filter on some interfce just like in this http://lartc.org/howto/lartc.adv-filter.hashing.html I want to find a command that deletes one rule (e.g. 1.2.1.123) from the table, leaving the rest untouched and working.

    Read the article

  • I cannot access Windows Update at all

    - by Cardinal fang
    I have been unable to access the Windows update site for a couple of weeks now. I just get a message saying "Internet Explorer cannot display the webpage" and saying I have connection problems. Same thing is replicated with any other Microsoft site I try to access. The Automatic Updates also do not work. I can access every other wesbite I've surfed to. I've tried Googling the problem and based on what other site have suggested I have cleared my cache and temp files. I've scanning my hard drive with my antivirus in case I have a virus (nada). I've tried turning off my firewall and anti-virus (I run Zone Alarm). I've downloaded SpyBot and scanned my drive with that in case something was missed by Zone Alarm (again nada). Based on suggestions from the smart cookies on the Bad Science forum, I've used nslookup to check my translation isn't wonky (got all the info they said I should get). I've also tried navigating there directly using the IP address I was given (nope). I normally access the internet through a 3 mobile broadband connection, but have also tried connecting using a mate's wi-fi connection in case it was something on my mobile modem interferring. I run Windows XP SP3 with Internet Explorer 7 and Zone Alarm Internet Security Suite as my anti-virus/ firewall. Any suggestions?

    Read the article

  • Can't display RSSI values in Wireshark

    - by Giovanni Soldi
    I am trying to analyze the up-link Wireless traffic generated by my Sony Ericsson phone and captured by my D-Link router, on which I installed the DD-WRT firmware. To do this, first I log in the router and enable the prism0 interface by typing the command: wl -i eth1 monitor 1 and then I start to capture the packets by typing: tcpdump -i prism0 ether src xx:xx:xx:xx:xx:xx -s0 -w /tmp/smbshare/sony_ericsson_test.pcap where xx:xx:xx:xx:xx:xx is the MAC address of my Sony Ericsson phone. After a while I transfer the sony_ericsson_test.pcap file to my computer and open it with Wireshark program. In order to display the RSSI values I follow this procedure: Edit - Preferences... - Columns - Press "Add" button - As "Field type" I choose "IEEE 802.11 RSSI" and finally I choose name "Power" and click on "Apply" button. The problem is that the column "Power" is empty with no RSSI values. Does Anyone has a clue on why are RSSI values not displayed? Maybe I am missing a passage. Looking forward to hearing from anyone of you! Thanks in advance for your help!

    Read the article

  • SQL Server Remote Connections

    - by Barry
    Hi, I am at my wits end with trying to access a remote SQL Server 2008 R2 Express instance. Here are the following that I have tried. 1) I enabled remote connections in the instance properties. 2) I enabled sql server and windows authentication mode and created an account to log in using sql server authentication. 3) I started the SQL Server Browser service 4) I forwarded ports 1433 and 1434 on the router to the IP address of the machine hosting SQL Server. 5) I turned off firewalls on both the Machine running the instance and the router. 6) http://www.yougetsignal.com/tools/open-ports/ I used this to check whether or not both ports were open and it says that they are closed. I have the SQL Server Express instance running and the browser running. I have configured it to allow remote connections yet, it tells me they are both closed. I'm pretty confused at this stage. On the client Machine I am trying to connect using the following format machineip\SQLEXPRESS with SQL Server Management Studio Express. Thanks in advance

    Read the article

  • SSH Socks Proxy wiith iptables REDIRECT

    - by Radium
    I have googled and haven`t found the answer on my question. Help me please. There are two servers: serverA with public IP 12.0.0.10 and an private IP 10.0.0.5 serverB with public IP 20.0.0.11 I have setup SOCKS proxy on serverB to serverA: ssh -D20.0.0.11:2222 [email protected] So when on my local machine in a browser i specify SOCKS proxy 20.0.0.11:2222 (serverB:2222) as external IP while browsing i get 12.0.0.10 (serverA IP). That is ok. As well if i go onto http://10.0.0.5 (serverA private IP) it is also reachable. That is what i need. I want to make servers A private IP to be available through servers B public IP on certain ports but without specifying SOCKS in my browser. I could use ssh port forward but the problem is - i need to forward many ports and do not know which exactly - i know only the range. So when i connect to 20.0.0.11 to any port , for example, from 3000:4000 range, i want that traffic to be redirected to 10.0.0.5 on the same port. That is why i`ve decided maybe SOCKS proxy via SSH and iptables REDIRECT could help me. Client - serverBPublicIP (any port from range 3000:4000) - serverAPublicIP - serverAPrivateIP (the port was requested on serverBPublicIP) On serverB i do: ssh -D20.0.0.11:2222 [email protected] iptables -t nat -A PREROUTING -d 20.0.0.11 -p tcp --dport 3000:4000 -j REDIRECT --to-port 2222 But that does not work - when i telnet on 20.0.0.11:3001 for example i do not see any proxied traffic on the serverA. What should i do else? I have tried tcpsocks like this (in example i am telneting to 20.0.0.11:3001) Client -> 20.0.0.11:3001 -> iptables REDIRECT from 3001 --to-port 1111 -> tcpsocks from 1111 to 2222 -> SOCKS proxy from serverB to serverA on port 2222 -> serverA But i do not know what to do with the traffic on serverA. How to route it to its private IP. Help me please. I know, VPN removes all the hell i am trying to create, but i have no ability to use tun/tap device. It is disabled.

    Read the article

  • Membership in two domains

    - by imagodei
    Hello! I would your suggestions for an effective solution for a person, who needs to access resources in two Windows domains and wants to use one computer. It's about our CEO, who has accepted a second position in another company. Accessing files and folders isn't big problem. The greatest challenge I see is that he wants to conveniently access Exchange accounts in both companies; he would like to send and receive mail in single Outlook if possible (two profiles?) There is also a challenge with calendars: he would like to have one calendar for all activities from both Exchange accounts. Creating a POP3 account for accessing second Exchange server is a last resort, because obviously there is a problem with scheduling meetings and other calendar related tasks. Forwarding and receiving all mail/tasks on primary Exchange server is inconvenient because simple replying to original sender is disabled; and also when manually changing the recepient, he will receive mail from the wrong address. We were considering Virtualisation, that is setting up an instance of virtual machine inside existing installation and then joining this virtual computer to a second domain. Then installing another MS Outlook. This would of course mean two different Outlook accounts, two different calendars, but would at least enable our CEO to access all information from a single laptop. Does anyone have any other idea? I know setting up two domains on a single computer is a no-go (without much hacking at least), but effective workarounds are appreciate. The thing I am looking here is high usage/efficiency/productivity, but also as elegant solution from the administration point of view. Thank you very much (if you managed to read this through, this is a good sign ^_^ )

    Read the article

  • SQL Server Remote Connections

    - by Barry
    Hi, I am at my wits end with trying to access a remote SQL Server 2008 R2 Express instance. Here are the following that I have tried. 1) I enabled remote connections in the instance properties. 2) I enabled sql server and windows authentication mode and created an account to log in using sql server authentication. 3) I started the SQL Server Browser service 4) I forwarded ports 1433 and 1434 on the router to the IP address of the machine hosting SQL Server. 5) I turned off firewalls on both the Machine running the instance and the router. 6) http://www.yougetsignal.com/tools/open-ports/ I used this to check whether or not both ports were open and it says that they are closed. I have the SQL Server Express instance running and the browser running. I have configured it to allow remote connections yet, it tells me they are both closed. I'm pretty confused at this stage. On the client Machine I am trying to connect using the following format machineip\SQLEXPRESS with SQL Server Management Studio Express. Thanks in advance

    Read the article

  • Mac Mavericks, ngircd localhost works, private IP doesn't

    - by user221945
    I have configured ngircd to listen on my private ip address. It doesn't. Localhost works fine. Configuration test: ngIRCd 21-IDENT+IPv6+IRCPLUS+SSL+SYSLOG+TCPWRAP+ZLIB-x86_64/apple/darwin13.2.0 Copyright (c)2001-2013 Alexander Barton () and Contributors. Homepage: http://ngircd.barton.de/ This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Reading configuration from "/opt/local/etc/ngircd.conf" ... OK, press enter to see a dump of your server configuration ... [GLOBAL] Name = irc.bellbookandpistol.com AdminInfo1 = Jaedreth AdminInfo2 = San Diego County CA, US AdminEMail = [email protected] HelpFile = /opt/local/share/doc/ngircd/Commands.txt Info = Server Info Text Listen = 10.0.1.5,127.0.0.1 MotdFile = MotdPhrase = "Welcome to irc.bellbookandpistol.com" Password = PidFile = Ports = 6667 ServerGID = wheel ServerUID = root [LIMITS] ConnectRetry = 60 IdleTimeout = 0 MaxConnections = 0 MaxConnectionsIP = 6 MaxJoins = -1 MaxNickLength = 9 MaxListSize = 0 PingTimeout = 120 PongTimeout = 20 [OPTIONS] AllowedChannelTypes = #&+ AllowRemoteOper = no ChrootDir = CloakHost = CloakHostModeX = CloakHostSalt = kBih5mu\kVI!DC6eifT(hd4m/0'zb/=: CloakUserToNick = no ConnectIPv4 = yes ConnectIPv6 = no DefaultUserModes = DNS = yes IncludeDir = /opt/local/etc/ngircd.conf.d MorePrivacy = no NoticeAuth = no OperCanUseMode = no OperChanPAutoOp = yes OperServerMode = no RequireAuthPing = no ScrubCTCP = no SyslogFacility = local5 WebircPassword = [SSL] CertFile = CipherList = HIGH:!aNULL:@STRENGTH DHFile = KeyFile = KeyFilePassword = Ports = [OPERATOR] Name = [REDACTED] Password = [REDACTED] Mask = [CHANNEL] Name = #BBP Modes = tnk Key = MaxUsers = 0 Topic = Welcome to the Bell, Book and Pistol IRC Server! KeyFile = As you can see, it should be listening on 10.0.1.5, but it isn't. After turning on Apache manually, port 80 works on 10.0.1.5, but port 6667 doesn't. It only works on localhost. Is there some terminal command I could use or some config file I could edit to get this to work?

    Read the article

  • Need advice on which PCI SATA Controller Card to Purchase

    - by Matt1776
    I have a major issue with the build of a machine I am trying to get up and running. My goal is to create a file server that will service the needs of my software development, personal media storage and streaming/media server needs, as well as provide a strong platform for backing up all this data in a routine, cron-job oriented German efficiency sort of way. The issue is a simple one - all my drives are SATA drives and my motherboard controller only contains 4 ports. Solving the issue has proven to be an unmitigated nightmare. I would like advice on the purchase of the following: 4 Port internal SATA / 2 Port external eSATA PCI SATA Controller Card that has the following features and/or advantages: It must function. If I plug it in and attach drives, I expect my system to still make it to the Operating System login screen. It must function on CentOS, and I mean it must function WELL and with MINIMAL hassle. If hassle is unavoidable, there shall be CLEAR CUT and EASY TO FOLLOW instructions on how to install drivers and other supporting software. I do not need nor want fakeRAID - I will be setting up any RAID configurations from within the operating system. Now, if I am able to find such a mythical device, I would be eternally grateful to whomever would be able to point me in the right direction, a direction which I assume will be paved with yellow bricks. I am prepared to pay a considerable sum of money (as SATA controller cards go) and so paying anywhere between 60 to 120 dollars will not be an issue whatsoever. Does such a magical device exist? The following link shows an "example" of the type of thing I am looking for, however, I have no way of verifying that once I plug this baby in that my system will still continue to function once I've attached the drives, or that once I've made it to the OS, I will be able to install whatever drivers or software programs I need to make it work with relative ease. It doesn't have to be dog-shit simple, but it cannot involve kernels or brain surgery. http://www.amazon.com/gp/product/B00552PLN4/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B003GSGMPU&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1HJG60XTZFJ48Z173HKY So does anyone have a suggestion regarding the subject I am asking about? PCI SATA Controller Cards? It would help if you've had experience with the component before - that is after all why I am asking here - for those who have had experience that I do not have. Bear in mind that this is for a home setup and that I do not have a company credit card. I have a budget with a 'relative' upper limit of about $150.00.

    Read the article

  • Transparent proxying leaves sockets with SYN_RCVD in MacOS X 10.6 Snow Leopard (and maybe FreeBSD)

    - by apenwarr
    I'm trying to create a transparent proxy on my MacOS machine in order to port the sshuttle ssh-based transproxy VPN from Linux. I think I almost have it working, but sadly, almost is not 100%. Short version is this. In one window, start something that listens on port 12300: $ while :; do nc -l 12300; done Now enable proxying: # sysctl -w net.inet.ip.forwarding=1 # sysctl -w net.inet.ip.fw.enable=1 # ipfw add 1000 fwd 127.0.0.1,12300 log tcp from any to any And now test it out: $ telnet localhost 9999 # any port number will do # this works; type stuff and you'll see it in the nc window $ telnet google.com 80 # any host/port will do # this *doesn't* work! After the latter experiment, I see lines like this in netstat: $ netstat -tn | grep ^tcp4 tcp4 0 0 66.249.91.104.80 192.168.1.130.61072 SYN_RCVD tcp4 0 0 192.168.1.130.61072 66.249.91.104.80 SYN_SENT The second socket belongs to my telnet program; the first is more suspicious. SYN_RCVD implies that my SYN packet was correctly captured by the firewall and taken in by the kernel, but apparently the SYNACK was never sent back to telnet, because it's still in SYN_SENT. On the other hand, if I kill the nc server, I get this: $ telnet google.com 80 Trying 66.249.81.104... telnet: connect to address 66.249.81.104: Connection refused telnet: Unable to connect to remote host ...which is as expected: my proxy server isn't running, so ipfw redirects my connection to port 12300, which has nobody listening on it, ie. connection refused. My uname says this: $ uname -a Darwin mean.local 10.2.0 Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386 i386 Does anybody see any different results? (I'm especially interested in Snow Leopard vs Leopard results, as there seem to be some internet rumours that transproxy is broken in Snow Leopard version) Any advice for how to fix?

    Read the article

< Previous Page | 751 752 753 754 755 756 757 758 759 760 761 762  | Next Page >