Search Results

Search found 18786 results on 752 pages for 'edit insanely'.

Page 76/752 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

  • How do I know if I have KMS enabled?

    - by Attila Oláh
    How can I check if KMS is enabled in my kernel? I've compiled mine with KMS radeon modeset defaulting to 1, but I still suspect that it is not enabled. EDIT: aatiis@aiur ~ $ dmesg | grep drm [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0 [drm] Setting GART location based on new memory map [drm] Loading RS780 CP Microcode [drm] Resetting GPU [drm] writeback test succeeded in 1 usecs EDIT 2: aatiis@aiur ~ $ glxinfo | grep render IRQ's not enabled, falling back to busy waits: 2 0 direct rendering: Yes OpenGL renderer string: Mesa DRI R600 (RS780 9612) 20090101 TCL aatiis@aiur ~ $ sudo grep -i kms /var/log/Xorg.0.log [ 57.201] (II) [KMS] drm report modesetting isn't supported.

    Read the article

  • How do I make h.264 work on YouTube on Firefox on Windows 7 64 bit?

    - by Ansis Malins
    Various news articles state that Firefox supports h.264 on Windows since version 20. As of this writing the version is 24, yet Firefox still can't play most YouTube videos. I did the HTML5 opt-in and tested both Firefox and Nightly. I also made sure media.windows-media-foundation.enabled in about:config is enabled, and it is by default both on Firefox and Nightly. What's wrong and how do I fix it? Edit: This video works. This video fails. They're both MP4 (right click video - stats for nerds), so Firefox's h.264 support works at least some of the time. Edit: When I go to a YouTube video that doesn't work, click Share - Embed and then copy-paste the src of the iframe tag into the address bar, the video works.

    Read the article

  • How do I stop my ethernet network connection from dropping?

    - by Sean Hill
    My ethernet-based network connection doesn't stay up consistently. I'm running a ping against the gateway and it will: Work for a minute Freeze, time out, or give multi-second response times Repeat If it's stuck and I disable/enable networking through the network manager applet everything will work fine again for a minute. After 280 packets transmitted I'm getting 41% packet loss. I've tried a different cable and connection to the gateway but this had no effect. The distance to the gateway is just about 3 feet. Seems to work fine if I switch over to Windows, but Ubuntu is my main OS and I can't even use it right now as I depend on the network. My setup... OS: Ubuntu 11.04, dual-booting Windows 7 Mobo: Gigabyte Z68X-UD4-B3 CPU: Intel Core i7 2600K Edit A little clarification... Network Manager is still showing me as connected, but I am unable to reach to gateway or anything beyond. At no point does NM suggest the connection is lost and calling ifconfig shows that I still have an IP address. I tried connecting to a different gateway with a different cable and the same problem arises. As requested: lspci | grep -i eth 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) dmesg | tail -f [ 14.024709] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 14.026443] EXT4-fs (sda7): re-mounted. Opts: commit=0 [ 14.176101] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj. [ 23.917731] eth0: no IPv6 routers present [ 726.109697] r8169 0000:07:00.0: eth0: link up [ 733.169494] r8169 0000:07:00.0: eth0: link up [ 753.930119] r8169 0000:07:00.0: eth0: link up [ 880.787332] r8169 0000:07:00.0: eth0: link up [ 1159.161283] r8169 0000:07:00.0: eth0: link up [ 1406.623550] r8169 0000:07:00.0: eth0: link up Edit @roland-taylor: Network is always available under Windows. Pings do not timeout, applications do not complain of no network availability, large downloads are not interrupted or slowed.

    Read the article

  • Is paper indispensable in a programmer's everyday work?

    - by rwong
    As a programmer who work in a company whose vision is to make paperless office possible, is there any way I can work effectively while using less paper? I can list at least several kinds of papers I use quite often: Paper notebook, on which I do most of the pre-coding design work and ideas Books Temporary printouts of source code, though not so often (in color, with a 6 point font at 600 DPI) Sticky note, to remind myself of things that should be taken care of within a few days On the other hand, I also use a wiki and an office text editor. Once a while I would use a diagramming software to make a few flowcharts. Deeper questions: Is there a relationship between paper use and productivity? How can programmers help save the trees? Is paperless software development fundamentally different from paperless office? Related questions: Do you ever write code with pen and paper, and should we do it more often? What physical tools do you find useful to work as a programmer? What things are essential on a programmer's desk? Stuff every programmer needs while working Additional info, if it helps: Everyone has dual monitors. We have decent project management and issue tracking software (both web-based). Please be constructive. In particular, please give your answer to your peer programmers who wish to be flexible and are willing to change working style in order to become more productive as well as meeting certain their own personal values. Edited: I removed the company's view because it appears to be too flamebait. If you need to see my original words, go to the edit history. Deleted: Doxygen and whiteboard. Reason: disregarding my personal experience with these great tools, we never had to print out anything as a consequence of using/not using them. To see my original words, go to the edit history.

    Read the article

  • reinstalling phpmyadmin

    - by explorex
    EDIT:: installed mysql-server but no phpmyadmin (since phpmyadmin was installed before mysql, that resulted an error). How to reinstall phpmyadmin with database (there is no phpmyadmin datbase)? unstalling it and reinstalling it didn't help. i was trying to install phpmyadmin (and zend framework) through synaptic manager but in the middle i was prompted for password i thought it was phpmyadmin password and i proceeded but i got error and i aborted. and then again i tried to reinstall, it reinstalled but i am not getting phpmyadmin. EDIT::The following is invalid so please don't bother apache is running but mysql is not some of it's characteristics are: santosh@explorer:~$ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) santosh@explorer:~$ sudo apt-get install mysql-server E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable) E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it? Should i be asking this question here or stackoverflow? UPDATES:: after restarting my computer santosh@explorer:~$ sudo service mysql start [sudo] password for santosh: mysql: unrecognized service UPDATES:: santosh@explorer:~$ sudo apt-get install mysql Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package mysql

    Read the article

  • how to troubleshoot sql server issues

    - by joe
    i have an ASP .net application with sql server database, and i am wondering if you can give your ideas on how to troubleshoot the following issue: i can insert / update / delete from any table, but i have one page that uses transactions to insert into different tables. the c# code is correct and very simple, but it fails. i used the sql profiler to see how my app interacts with the DB, especially that the app is using stored procedures, i can catch the exec procedure statement and run it manually from SSMS and it works fine, but the same stored procedure fails from the application!!! which lead me to think that issue is coming from the user account and settings, i am no expert in sql server and wondering if anyone can explain how to verify the required settings for user account. thanks EDIT: in web.config here is how i reference my connection <connectionStrings> <add name="Conn" connectionString="Data Source=localhost;Initial Catalog=myDB;Persist Security Info=True;User ID=DbUser;Password=password1254_3" providerName="System.Data.SqlClient"> </connectionstring> EDIT: i will try to describe the process here: 1- i begin a transaction 2- i call a stored proc to insert (which succeeds) and return the scope identity ( that will be used in the next step) 3- i call another stored procedure to insert some more info + scope identity from step 2, which is a foreign key here 4- i get error, foreign key violation 5- transaction rolled back, now tables empty again... thanks

    Read the article

  • Postfix: How to apply header_checks only for specific Domains?

    - by Lukas
    Basically what I want to do is rewriting the From: Header, using header_checks, but only if the mail goes to a certain domain. The problem with header_check is, that I can't check for a combination of To: and From: Headers. Now I was wondering if it was possible to use the header_checks in combination with smtpd_restriction_classes or something similar. I've found a lot information about header_checks and multiple header fields, when searching the net. All of them basically telling me, that one can't combine two header for checking. But I didn't find any information if it was possible to only do a header check if a condition (eg. mail goes to example.com) was met. Edit: While doing some more Research I've found the following article which suggests to add a Service in postfix master.cf, use a transportmap to pass mails for the Domain to that service and have a separate header_check defined with -o. The thing is that I can't get it to work... What I did so far is adding the Service to the master.cf: example unix - - n - - smtpd -o header_checks=regexp:/etc/postfix/check_headers_example Adding the followin Line to the transportmap: example.com example: Last but not least I have two regexp-files for header checks, one for the newly added service, and one to redirect answers to the rewritten domain. check_headers_example: /From:(.*)@mydomain.ain>(.*)/ REPLACE From:[email protected]>$2 Obviously if someone answers, the mail would go to nirvana, so I have the following check_headers defined in the main postfix process: /To:(.*)<(.*)@mydomain.example.com>(.*)/ REDIRECT [email protected]$2 Somehow the Transport is ignored. Any help is appreciated. Edit 2: I'm still stuck... I did try the following: smtpd_restriction_classes = header_rewrite header_rewrite = regexp:/etc/postfix/rewrite_headers_domain smtpd_recipient_restrictions = (some checks) check_recipient_access hash:/etc/postfix/rewrite_table, (more checks) In the rewrite_table the following entries exist: /From:(.*)@mydomain.ain>(.*)/ REPLACE From:[email protected]>$2 All it gets me is a NOQUEUE: reject: 451 4.3.5 Server configuration error. I couldn't find any resources on how you would do that but some people saying it wasn't possible. Edit 3: The reason I asked this question was, that we have a customer (lets say customer.com) who uses some aliases that will forward mail to a domain, let's say example.com. The mailserver at example.com does not accept any mail from an external server that come from a sender @example.com. So all mails that are written from example.com to [email protected] will be rejected in the end. An exception on example.com's mailserver is not possible. We didn't really solve this problem, but will try to work around it by using lists (mailman) instead of aliases. This is not really nice though, nor a real solution. I'd appreciate all suggestions how this could be done in a proper way.

    Read the article

  • Fix/Bypass "Cannot connect to the real website-blocked" error in Google Chrome with OpenDNS blocking

    - by George H
    I have a large problem with Chrome in my organisation. I use DNS to manage web site blocking, for sites which are not appropriate and are potentially a risk to the organisation where I do this. I only want to use Chrome over the network, as Internet Explorer has compatibility problems with some sites that we use (We cannot change this either or use different sites). Therefore using internet explorer is not a solution. I do not want to install a different browser, for multiple reasons. Mainly because of the difficulty of rewriting the customised add-ons that we use. However, recently, I have had lots of problems with Chrome SSL Errors. I cannot use my custom OpenDNS block pages, which uses the contact form to request an unblocking. Chrome often blocks OpenDNS for sites (a good example is Facebook) that request HTTPS. Some sites like https://internetbadguys.com (OpenDNS example) This means that chrome refuses to load the blocking page, explaining that the site is blocked. Instead they often call IT support, but they want a solution, as they are sick of getting lots of SSL errors. I have tried looking into ways to turning this off. I have tried: Typing "proceed". That didn't work. Typing "proceed", pressing enter. Didn't work I cannot find phishing and anti-malware any more in Chrome, from the internet guides. Not using HTTPS. However there is an automatic redirect to HTTPS on most sites. Therefore the error keeps coming up. Checking my clocks. They were correct. Does anyone have an idea on how to disabling, bypassing or working around this "feature"? EDIT: This is an example what I am talking about - I found that on google images. I do not block google. EDIT 2: My clocks are correct. I cannot stop using OpenDNS either. EDIT 3: My question is: How do I stop chrome from refusing to load pages that are blocked by OpenDNS, where the server has explicitly requested HTTPS.

    Read the article

  • Reduce Bookmarks in Chrome to Toolbar Icons

    - by Asian Angel
    Do you want to make the most efficient use of the space in Chrome’s Bookmarks Toolbar? Now you can reduce the bookmarks to icons with just a few minutes work. Note: You may or may not wish to do some reorganizing with your bookmarks before-hand. Condensing the Bookmarks If your browser is anything like ours then it has not taken long to fill up your Bookmarks Toolbar. Accessing the drop-down section often throughout the day is not too fun. The bookmarks are the easiest part of your collection to condense. Right-click on each bookmark and select “Edit…” to open the Edit Bookmark Window. Delete the text, click OK, and you are finished. You still have a useable bookmark that looks nice and takes up very little room. These are our bookmarks from the first screenshot above…no problems with accessing all of them now. With just a few minutes work you can have a beautiful and compact Bookmarks Toolbar. If you have been looking for a more efficient and compact Bookmarks Toolbar in Chrome, then this little hack will certainly be useful for you. Similar Articles Productive Geek Tips Reduce Your Bookmarks Toolbar to a Toolbar ButtonAccess Your Bookmarks with a Toolbar Button in Google ChromeConvert Chrome Bookmark Toolbar Folders to IconsAdd the Bookmarks Menu to Your Bookmarks Toolbar with Bookmarks UI ConsolidatorCompact Toolbar Buttons in Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes

    Read the article

  • How to fix a Broadcom 43224 (rev. 01) in ubuntu 12.10, running on a macbook pro 6,2?

    - by Eduardo Bezerra
    I've googled for 3 days so far, with no success, so I'll be straightforward: How do you get it to work? this is the output for lspci -v: 03:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) Subsystem: Apple Inc. Device 0093 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at c1b00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: bcma-pci-bridge Kernel modules: bcma for uname -a: Linux fury 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I've tried with bcmwl-kernel-source, firmware-b43-installer and now I'm out of ideas. Can someone help me? This is driving me insane! EDIT: for lspci -nn | grep 0280: 03:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) I can see the networks available, but when I try to connect, it gets stuck in a loop: tries to connect, fails, tries again, fails again and so on... EDIT 2: After a long break from this problem, I've just run a few tests again and found out that, although my macbuntu still fails to connect to my home wi-fi network, it works just fine at my university... Does that help in anyway? My home network is managed by a dual-band (2.4Ghz and 5Ghz) 802.11n cisco e4200 wi-fi router.

    Read the article

  • How do I set permissions structure for multiple users editing multiple sites in /var/www on Ubuntu 9

    - by Michael T. Smith
    I'm setting up an Ubuntu server that will have 3 or 4 VirtualHosts that I want users to be able to work in (add new files, edit old files, etc.). I currently plan on storing the sites in /var/www but wouldn't be opposed to moving it. I know how to add new users, I know how to add new groups. I'm unsure of the best way to handle users being only able to edit some sites. I read over the answers here in this question, so I was thinking I could setup a group and add users to that group, but then they'd all have essentially the same permissions. Am I just going to have to assign each user specific permissions? Or is there a better way of handling this? Added: I should also note, that I'll have each user login in via SSH/sFTP. The users would never need to do anything else on the server.

    Read the article

  • Cannot mount a CIFS network share over VPN

    - by Aron Rotteveel
    I have setup u VPN connection to our Windows 2008 server at the office and it seems to work fine. For some reason, however, I still am not able to access the network shares over a VPN connection using my standard fstab entries. When I am physically connected to the network, it works fine, but now when trying this over VPN I get the following error: mount error(110): Connection timed out Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) My /etc/fstab looks like this: //server2008/share /mnt/share cifs iocharset=utf8,credentials=/home/aron/.smbcredentials,uid=1000 0 0 As said, it works fine when physically connected, but over VPN it just wont work. Any help is appreciated. EDIT: It seems the Windows firewall is making things harder on me. When I turn it off, I get a bit further, although I still get the following error message: Unable to find suitable address. The strange thing is that I have file sharing added as an exception to the firewall. Port 137-139 and port 445 are open, which should suffice, shouldn't it? EDIT Jan 20th: Still not working. When I have the firewall turned on, it times out. When I turn it off, I get the not suitable address error. Turning the firewall off is not an option, by the way.

    Read the article

  • Difference between multiple NS and NS having multiple A

    - by Jake
    I found this Can an NS Record Point To Multiple A Records?, but wonders what is the difference, if any. For example: mydomain.com. IN NS ns1.myhost.com. mydomain.com. IN NS ns2.myhost.com. ns1.myhost.com. IN A 111.222.333.1 ns2.myhost.com. IN A 111.222.333.2 versus mydomain.com. IN NS ns.myhost.com. ns.myhost.com. IN A 111.222.333.1 ns.myhost.com. IN A 111.222.333.2 EDIT: actually, come to think of it, it could be said the same for MX records. Any breaking differences? EDIT 2: then again, MX allow use of priority values so its a different case, in that one-ip-per-domain is more useful sometimes.

    Read the article

  • Torrent, ISA Server 2006 and packet dropped due to TCP_NOT_SYNC

    - by Pascal
    Hi, I'm trying to get uTorrent 2.0.4 to work in a DMZ machine, protected by a ISA Server 2006. I've opened 1 inbound port (via publishing) and opened all the higher ports for that specific machine that runs uTorrent on my DMZ, and it's working almost fine. The problem is that I keep getting packets dropped with 0xc0040017 FWX_E_TCP_NOT_SYN_PACKET_DROPPED. Is there any way to disable this via registry? Is there any way around this? The download speed fluctuates a lot, and when I starts hitting the upper limit that I've defined in uTorrent, the errors start poping up a lot, and the download speed goes way down, and the process repeats on and on Tks Edit My outbound rules are: Port Range: TCP 10000-65535 Outbound Port Range: UDP 10000-65535 Send Edit It's probably a bug handling requests from Windows 7. When I installed the uTorrent on a XP machine, the problem went away

    Read the article

  • /etc/resolv.conf nameserver fd00::1

    - by user88631
    My /etc/resolv.conf constantly get a mysterious entry, i run a home network with ipv6 provided by ravd, the interface is auto-configured by Network manager (all name server lookups are lost when this line is first in my /etc/resolv.conf) . Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) **# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN** nameserver fd00::1 nameserver 192.168.1.1 search home.int When ping is working cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.1.1 search home.int So something is putting fd00::1 at start of file, not if I ping6 fd00::1 I get Destination unreachable: Administratively prohibited To diagnose this I ran the router with single cable to connected to ubuntu machine. Ran tcpdump + restarted network on ubuntu. "tcpdump ip6 -e -i eth0 | grep fd00" finds nothing, it's not being advertised via the network.. The only hit I got was when an upstream router refused a connection attempt from the ubuntu machine to fd00::1. I have also switched on debug for network manager & it appears to set the mystery line.. 15:22:14 storage-pc NetworkManager[349]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete. 15:22:14 storage-pc NetworkManager[349]: <warn> dnsmasq exited with error: Other problem (5) 15:22:14 storage-pc NetworkManager[349]: <debug> [1346822534.281528] [nm-dns-manager.c:598] update_dns(): updating resolv.conf 15:22:14 storage-pc NetworkManager[349]: <debug> [1346822534.281875] [nm-dns-manager.c:719] update_dns(): DNS: plugin dnsmasq ignored (caching disabled) 15:22:14 storage-pc NetworkManager[349]: <info> ((null)): writing resolv.conf to /sbin/resolvconf 15:22:14 storage-pc dbus[2184]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' 15:22:14 storage-pc dnsmasq[2875]: reading /etc/resolv.conf 15:22:14 storage-pc dnsmasq[2875]: using nameserver 192.168.1.1#53 15:22:14 storage-pc dnsmasq[2875]: using nameserver fd00::1#53 Any suggestions on how to find out where this comes from?

    Read the article

  • Minimal slim way to create and run an internal RSS feed

    - by tharkun
    I have the idea to create a very simple tech update feed for internal collaboration in our company. For that I'm looking for the easiest way of writing messages which then get syndicated as RSS feed. Something like a mini blog tool. The simpler the better. Enter title, body and send, all subscribers of the feed get the new message. Sort of like Twitter without using Twitter. [edit]It has to be a purely web based solution![/edit] Any tips, ideas, experiences?

    Read the article

  • What is your most preferred method of site pagination?

    - by John Smith
    There seem to be quite a few implementations of this feature. Some sites like like Stackexchange have it laid out like this: [1][2][3][4][5] ... [954][Next] Other sites like game forums may have something like this: [1][2][3] ... [10] ... [50] ... [500] ... [954][Next] Some sites like webcomics (XKCD comes to mind) have it laid out like this: [Last][Prev][Random][Next][First] Reddit has a very simple pagination with only: [Prev][Next] Sites like Stackexchange and Google also allow you to change how many results you want per page. Personally, I have never used this feature. Is it even worth including or does it just further confuse the design with needless features? Personally, I have only ever seen the need for the webcomic style (without the random). If I need to go to a specific page (which is very, very rare) then I can just edit the address bar. Is it good design to make something more complex for rare occasions where it might make save the user some time? Is having to edit the address bar to navigate the site effectively in some circumstances bad design?

    Read the article

  • Strange 3D game engine camera with X,Y,Zoom instead of X,Y,Z

    - by Jenko
    I'm using a 3D game engine, that uses a 4x4 matrix to modify the camera projection, in this format: r r r x r r r y r r r z - - - zoom Strangely though, the camera does not respond to the Z translation parameter, and so you're forced to use X, Y, Zoom to move the camera around. Technically this is plausible for isometric-style games such as Age Of Empires III. But this is a 3D engine, and so why would they have designed the camera to ignore Z and respond only to zoom? Am I missing something here? I've tried every method of setting the camera and it really seems to ignore Z. So currently I have to resort to moving the main object in the scene graph instead of moving the camera in relation to the objects. My question: Do you have any idea why the engine would use such a scheme? Is it common? Why? Or does it seem like I'm missing something and the SetProjection(Matrix) function is broken and somehow ignores the Z translation in the matrix? (unlikely, but possible) Anyhow, what are the workarounds? Is moving objects around the only way? Edit: I'm sorry I cannot reveal much about the engine because we're in a binding contract. It's a locally developed engine (Australia) written in managed C# used for data visualizations. Edit: The default mode of the engine is orthographic, although I've switched it into perspective mode. Its probably more effective to use X, Y, Zoom in orthographic mode, but I need to use perspective mode to render everyday objects as well.

    Read the article

  • Is there an Alternative to TextMate's mate and rmate for Windows?

    - by TiernanO
    As part of the upcoming TextMate 2 release, there will be a new feature called rmate, which will allow you to edit files from a remote machine (Linux/Unix/OSX) via SSH using your local copy of TextMate... Is there something similar for Windows? I know i could use CyberDuck, find the file i want to edit, download locally, work on it and then re-upload, but rmate looks like you just type rmate on the remote server, and text mate pops up with the file. (i have not tried since i am not a TextMate owner) Is there something similar for Windows?

    Read the article

  • connect two computers together via a rs232 serial port

    - by Richard
    Wondering if anyone knows of a solution to connect with telnet/ssh through a rs232 serial port Edit: I am looking for a way to connect to computers together via a serial port. I want to be able to view the file system of a computer through a serial port.. Is this possible? Edit: So I have successfully connected two computers together using r232 serial ports with a null modem. The instructions I have used are located here Now how do I get to the file system of the host computer?? Any ideas?

    Read the article

  • Setting jQuery after ASP.net AJAX partial post back

    - by Steve Clements
    OK, so for some reason you have a mega mashup solution with ASP.net AJAX, jQuery and web forms.  Perhaps you are just on the migration from AjaxControlToolkit to the jQuery UI framework – who knows!! Anyway, the problem is that when you post back with something like an UpdatePanel, you will find that your nicely setup jQuery stuff, like the datepicker for example will no longer work. You may have something like this… $(document).ready(function () {     $(".date-edit").datepicker({ dateFormat: "dd/mm/yy", firstDay: 1, showOtherMonths: true, selectOtherMonths: true }); });   When you’re ASP.net UpdatePanel post back, you will find that your datepicker has gone.  Bugger! Well you need to add this little gem to set it back up again once the UpdatePanel comes back to the page. var prm = Sys.WebForms.PageRequestManager.getInstance(); prm.add_endRequest(function () {     $(".date-edit").datepicker({ dateFormat: "dd/mm/yy", firstDay: 1, showOtherMonths: true, selectOtherMonths: true }); });   Or like me, you would have a javascript function, something like InitPage(); do all your work in there and call that on document.ready and endRequest. Your choice…you have the power   Share this post :

    Read the article

  • How can I find unused/unapplied CSS rules in a stylesheet?

    - by liori
    Hello, I've got a huge CSS file and an HTML file. I'd like to find out which rules are not used while displaying a HTML file. Are there tools for this? The CSS file has evolved over few years and from what I know no one has ever removed anything from it--people just wrote new overriding rules again and again. EDIT: It was suggested to use Dust-Me Selectors or Chrome's Web Page Performance tool. But they both work on level of selectors, and not individual rules. I've got lots of cases where a rule inside a selector is always overridden--and this is what I mostly want to get rid of. For example: body { color: white; padding: 10em; } h1 { color: black; } p { color: black; } ... ul { color: black; } All the text in my HTML is inside some wrapper element, so it is never white. body's padding always works, so of course the whole body selector cannot be removed. And I'd like to get rid of such useless rules too. EDIT: And another case of useless rule: when it duplicates existing one without changing anything: a { margin-left: 5px; color: blue; } a:hover { margin-left: 5px; color: red; } I'd happily get rid of the second margin-left... again it seems to me that those tools does not find such things. Thank you,

    Read the article

  • Multiple instances of Intellitrace.exe process

    - by Vincent Grondin
    Not so long ago I was confronted with a very bizarre problem… I was using visual studio 2010 and whenever I opened up the Test Impact view I would suddenly see my pc perf go down drastically…  Investigating this problem, I found out that hundreds of “Intellitrace.exe” processes had been started on my system and I could not close them as they would re-start as soon as I would close one.  That was very weird.  So I knew it had something to do with the Test Impact but how can this feature and Intellitrace.exe going crazy be related?  After a bit of thinking I remembered that a teammate (Etienne Tremblay, ALM MVP) had told me once that he had seen this issue before just after installing a MOCKING FRAMEWORK that uses the .NET Profiler API…  Apparently there’s a conflict between the test impact features of Visual Studio and some mocking products using the .NET profiler API…  Maybe because VS 2010 also uses this feature for Test Impact purposes, I don’t know… Anyways, here’s the fix…  Go to your VS 2010 and click the “Test” menu.  Then go to the “Edit Test Settings” and choose EACH test setting file applying the following actions (normally 2 files being “Local” and TraceAndTestImpact”: -          Select the Data And Diagnostic option on the left -          Make sure that the ASP.NET Client Proxy for Intellitrace and Test Impact option is NOT SELECTED -          Make sure that the Test Impact option is NOT SELECTED -          Save and close   Edit Test Settings   Problem solved…  For me having to choose between the “Test Impact” features and the “Mocking Framework” was a no brainer, bye bye test impact…  I did not investigate much on this subject but I feel there might be a way to have them both working by enabling one after the other in a precise sequence…  Feel free to leave a comment if you know how to make them both work at the same time!   Hope this helps someone out there !

    Read the article

  • Nvidia 740M still not working after Bumblebee installation

    - by Jon
    first of all, I have checked a lot of similar topics, but I still can't get my laptop to use Nvidia 740M. So first things first. I have a laptop Asus X550V(i5-3230, 4gb RAM, Nvidia 740M + Intel HD4000). I installed Ubuntu 13.10 alongside Win8(preinstalled) and both systems are running without problems. However, I have problem with second graphic card(Nvidia 740M), as Ubuntu doesn't recognize it. I installed bumblebee with this tutorial https://wiki.ubuntu.com/Bumblebee#Installation, but I still get error "Cannot access secondary GPU" error when trying to run ''optirun Steam'' in terminal. Then I tried to do this: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected. you need to edit the /etc/bumblebee/xorg.conf.nvidia (or /etc/bumblebee/xorg.conf.nouveau if using the noveau driver) and specify the correct BusID by following the instructions therein. But with lspci / VGA i get only info about Intel 4000, but no Nvidia. When I type only lspci, I get the line for Nvidia 740M,but after I edit the config file I still get second card error. Also, in /etc/bumblebee/xorg.conf.nvidia there wasn't BusID or anything similar, so I just added the whole line in device section. As I sad, I tried a lot of things to get it working, avoiding this forum(as I din't want to bother people with some solutions possible), but alas!, I had to bother you. If there is a need for some additional info, just say, no problem at all. Thank you very much in advance. :)

    Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >