Search Results

Search found 24568 results on 983 pages for 'high load'.

Page 76/983 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

• How do I activate the F_LINE input in a transplanted HP chassis?

  - by admin

  I have an HP Pavilion Media Center PC chassis, vintage 2003 or so and I replaced the motherboard in it with a newer (vintage 2009) HP motherboard, M2N68-LA (Narra 5). I have scoured the internet trying to find pinouts for the motherboard to no avail. My question concerns the front panel audio, specifically Line In. The old chassis was built for AC97 but the new mobo is build for the newer HD audio standard. I figured out by comparison & experimentally how to connect the Mic & Headphone jacks to the HD audio header of the mobo by adding a manual switch to set the SENSE lines. Now all works fine for Mic & headphone. The old chassis also has a front panel Line In jack that the newer HP chassis does not have. However, the new mobo has a 4 pin white connector labeled F_LINE that I believe is a line input. Under Windows 7 I see the two Line Inputs in the mixer but I can't get one of them to become active. The 4 pin F_LINE connector uses the two middle pins for ground, and presumably the other two for left and right audio inputs. There are no pins for sensing on that connector. Can anyone tell me how to use that F_LINE input for the front panel, or how to activate it?

  Read the article

• IIS/MSSQL HA on two servers? NLB + Mirroring

  - by Igor K

  Currently have the one server doing MSSQL/IIS. Can use NLB with two servers running IIS for HA and can use database mirroring and put the failover partner in the connection string for HA. Can we use NLB + Mirroring together? So if one of the servers died (ie power plug removed), everything will continue to work (after the timeout for the mirror to become the principal)?

  Read the article

• How can HAProxy improve availibility, or "how can I prevent my site from going down"? [closed]

  - by Joe Hopfgartner

  I am aware of what HAProxy does, but what if my HAproxy goes down? Or what if my DNS servers go down? Yes, dns is less the problem. However dns only solves to an IP and an IP is announced via BGP to be routed over some router. What if that router goes down? Of course if I have complicated application servers that are likely to fail HAProxy can significantly improve uptime. But my application isnt. In fact my application may very well just be delivering a small static html file via HTTP. Basically if any user anywhere types in MYDOMAIN.COM, I want the user to get SOMETHING on the screen other than a timeout or DNS resolution error. How can I do that? The point of entry is difficult. The so called "initial closure mechanism".

  Read the article

• Managed LAMP platform for maximizing availability and global reach, not scalability

  - by user66819

  Assume a Linux/Apache/MySQL/PHP application for a small base of registered users. With small userbase, there are no traffic peaks so the scalability that cloud platforms offer is not imperative. But the system is mission-critical, so availability is the primary goal. Users are also distributed across Asia, Europe, and US, so multiple server locations that minimize users' network hops would be highly desirable. The dream: a managed VPS platform where we would configure a single server (uploading PHP and other files, manipulating database, etc.), and the platform would automatically mirror the server in a handful of key places around the world (say one on each US coast, one in Europe, one in east Asia). File system synchronization and MySQL replication would happen automatically. Core operating system is managed, so we don't need to do full system administration and security, and low-level backups are also done by service provider, though we also do our own backups as well. Couple this with some sort of DNS geo-detection, so users are routed to the nearest operational server... with support for https, of course. Does such a dream exist? If not, what are some approaches to accomplish the same end with minimal time investment and minimal monthly hosting costs?

  Read the article

• 1080p HD TV + what is minimum spec pc required to stream HD movie files to it?

  - by rutherford

  I want to stream hi-def (non flash-based) movies from my future minimum spec pc to my network-ready HDTV. What I want to know is a) when streaming from a computer (local wifi network), is the computer's cpu/video/ram resources used to the same extent as it would be if playing back on the computers local screen? If not what are the differences? b) So with streaming hd content what is the minimum spec processor I should go for, if i) only one TV is acting as client ii) two TVs are simultaneous clients.

  Read the article

• Looking for a solid redirection infrastructre

  - by isoman

  We have critical servers (webservers and databases) that are fully replicated, except for the reverse proxy that we use to hide the internal stuff. This proxy is acting like a router that filters and redirects traffic to the main server and switch for failover if the main one is down. We want to find an alternative to this proxy because one single entry point is not enough. Is there any company that has a solid and redundant infrastructure that offers redirection to an IP and allows quick switching to another one?

  Read the article

• Windows 8: Multiple monitors with varying DPI? [closed]

  - by Sid

  Possible Duplicate: Dual monitors on Windows - How do I set a different DPI or text size on each monitor? I'm running Windows 8 on my Macbook Pro Retina (220dpi) which has an external 24" monitor (~96 dpi). In Mac OS 10.8.2, the display settings seem ok and I can actually use both displays without usability issues. I don't know what scaling settings etc it uses but it looks fine. On Windows 8, however when I boost the DPI settings to take advantage of the retina display, it blows up the display on the external monitor - text is giant sized. How can I tell Windows 8 to use the real DPI settings of each monitor? NOTE: I'm not asking for Windows 7.

  Read the article

• What are the ways to build a failover cluster?

  - by light

  I have a task where I need to build a failover cluster in two cases: first with servers on Red Hat Enterprise 5.1 and second with SUSE Linux Enterprise 11 SP1. Both cases have SAN. I know there are many ways to build failover cluster, but I can’t find out more, so I need next: The ways to build it? I know only virtualization. Any good book or resource to broad my mind? I’ll be glad to hear any suggestion. Thanks! EDIT #1: failover of servers with bussiness application on it. EDIT #2: will be great to hear summary about solutions with SLES servers? EDIT #3: So if I understand correctly, in my cases the main ways are to use internal solutions or virtualization. So now I have additional questions: Does manufacturer of blades provide some solution? For example HP or IBM. (Without virtualization) Do I need additional server to control "heartbeat" between main and redundant servers? (Virtualization) For example I have several physical servers with VMs. Do I need additional server to control availability of VMs and to move VMs to another physical server in the case their physical server failure? Sorry for my poor English. EDIT #4: Failover of VM or OS on physical server. In both cases will be used SAN , it's not specified, but I think with file system image on it. I started to think that my question is stupid and I need to remake it.

  Read the article

• HD video is slower than audio output

  - by Star

  I have an HD video files (1920x1080 H.264 DUAL AUDIO FLAC) file type: MKV file size: 1.25 GB file length: 24 minutes the problem is the video output is not synchronized with audio output, something slow too much sometime it gets too fast I tried running it on Windows Media Player , Media Player Classic , and a few other players, but the result is the same Additional Info: for device information I'm on LG S510 labtop

  Read the article

• How to load models in the extended MY_Router class in codeigniter

  - by askkirati

  I am not able to load models to the extended My_Router class in codeigniter. Below is my code: class MY_Router extends CI_Router { function MY_Router() { parent::CI_Router(); } function _validate_request($segments) { // Does the requested controller exist in the root folder? if (file_exists(APPPATH.'controllers/'.$segments[0].EXT)) { return $segments; } // Is the controller in a sub-folder? if (is_dir(APPPATH.'controllers/'.$segments[0])) { // Set the directory and remove it from the segment array $this->set_directory($segments[0]); $segments = array_slice($segments, 1); if (count($segments) > 0) { // Does the requested controller exist in the sub-folder? if ( ! file_exists(APPPATH.'controllers/'.$this->fetch_directory().$segments[0].EXT)) { show_404($this->fetch_directory().$segments[0]); } } else { $this->set_class($this->default_controller); $this->set_method('index'); // Does the default controller exist in the sub-folder? if ( ! file_exists(APPPATH.'controllers/'.$this->fetch_directory().$this->default_controller.EXT)) { $this->directory = ''; return array(); } } return $segments; } // Let's check if there are category segments $category_routes = $this->category_routing($segments); if($category_routes !== FALSE) { return $category_routes; } $user_routes = $this->user_routing($segments); if($user_routes != FALSE) { return $user_routes; } show_404($segments[0]); } function category_routing($segments) { $this->load->model('category_model'); if($this->category_model->category_exist($segments[0])) { //if only category if(count($segments)==1) { return array('category', 'category_browse', $segments[0]); } //category pagination if(count($segments)==2 and is_numeric($segments[1])) { return array('category','category_browse', $segments[0], $segments[1]); } //category upcoming if(count($segments)==2 and $segments[1] == 'upcoming') { return array('category','upcoming', $segments[0]); } //category upcoming pagination if(count($segments)==3 and $segments[1] == 'upcoming' and is_numeric($segments[3])) { return array('category','upcoming', $segments[0], $segments[3]); } //category top if(count($segments)==3 and $segments[1] == 'top') { return array('category','top', $segments[0], $segments[2]); } //category top pagination if(count($segments)==4 and $segments[1] == 'top' and is_numeric($segments[3])) { return array('category','top', $segments[0], $segments[3]); } } return FALSE; } function user_routing($segments) { $this->load->model('dx_auth/users', 'user_model'); if($this->user_model->check_username($segments[0])) { //only profile if(count($segments)==1) { return array('user','profile',$segments[0]); } //all friends if(count($segments)==2 and $segment[1]=='allfriends') { return array('user','allfriends',$segments[0]); } //all subscribers if(count($segments)==2 and $segment[1]=='allsubscribers') { return array('user','allsubscribers',$segments[0]); } //all subscription if(count($segments)==2 and $segment[1]=='allsubscriptions') { return array('user','allsubscriptions',$segments[0]); } } return FALSE; } } I have tried loading the models by using get_instance function provided by codeigniter but seems like it doesnot work. All i need is load the models in extended system library.

  Read the article

• loading Data in VBA from a text file

  - by omegayen

  I am not very familiar with VBA but need to use it for a new software program I am using (not Microsoft related) I have a text file that has columns of data I would like to read into VBA. Specifically the text file has 4 entries per row. Thus I would like to load in the column vectors (N by 1). The text file is separated by a space between each entry. So for example I want to load in column one and save it as array A, then column two and save as array B, then column three and save as array C, and then column four and save as array D. This code snippet found below from http://www.tek-tips.com/faqs.cfm?fid=482 is something I found that can load in text to an array, but I need to adapt it to be able to save the columns as different arrays as specified above... Open "MyFile.txt" For Input As #1 ReDim Txt$(0) Do While Not EOF(1) ReDim Preserve Txt$(UBound(Txt$) + 1) Input #1, Txt$(UBound(Txt$)) Loop Close #1

  Read the article

• How can i connect two or more machines via tcp cable to form a network grid?

  - by Gath

  How can i connect two or more machines to form a network grid and how can i distribute work load to the two machines? What operating systems do i need to run on the machines, and what application should i use to manage the load balancing? NB: I read somewhere that google uses cheap machines to perform this fete, how do they connect two network cards( 'Teaming' ) and distribute load across the machines? Good practical examples would serve me good, with actual code samples. Pointers to some good site i might read this stuff will be highly appreciated.

  Read the article

• LVS TCP connection timeouts - lingering connections

  - by Jon Topper

  I'm using keepalived to load-balance connections between a number of TCP servers. I don't expect it matters, but the service in this case is rabbitmq. I'm using NAT type balancing with weighted round-robin. A client connects to the server thus: [client]-----------[lvs]------------[real server] a b If a client connects to the LVS and remains idle, sending nothing on the socket, this eventually times out, according to timeouts set using ipvsadm --set. At this point, the connection marked 'a' above correctly disappears from the output of netstat -anp on the client, and from the output of ipvsadm -L -n -c on the lvs box. Connection 'b', however, remains ESTABLISHED according to netstat -anp on the real server box. Why is this? Can I force lvs to properly reset the connection to the real server?

  Read the article

• scalability with nginx, passenger, ruby on rails setup

  - by Dani Cela

  Hey guys I had a question regarding scalability for my RoR application. We have been optimizing our application over the last few days and after running blitz.io, notice that our application times out after maybe 1000 hits in 30 seconds we experienced massive timeouts. In the 1 minute test apparently 74% of users would have timed out. Look at the performance of my website: http://blitz.io/report/1c8eb2f395a5eadeabd62fd831ada9e5 Not saying that our website will in any way experience this now, but I wish to design the infrastructure to handle this. What is normally done in this situation? Currently we have one web server and one database server. Would load balancing be the route to go?

  Read the article

• Fortigate - Accessing a Virtual Server address from several interfaces

  - by Jeremy G

  I am setting up a new application in its own DMZ on our Fortigate 300C firewalls. I have defined a load-balancing configuration for part of the application, and this works fine for traffic coming in from our internal network. However, I would also like this application to be reachable from other DMZs, for inter-application traffic, and from the SSL VPN interface. I can't seem to define the required policy, and it seems this is due to Virtual Servers being bound to the client interface on the Fortigate rather than the server interface (and so my virtual IP is not accessible from any of these other interfaces) Does anyone have an idea how I might go about this ? I guess I could create other virtual IPs for each interface, but this gets complicated to handle as clients need to change the address they use depending on how they are connecting. Thanks, Jeremy G

  Read the article

• loadbalancing with difference nginx location context and backend server context

  - by robinmag

  Hi, I used nginx and upstream module for load balancing with the following config upstream lb { server 127.0.0.1:8080; server 127.0.0.1:8081; } server { listen 88; server_name localhost; location /cas/ { proxy_pass http://lb; proxy_redirect off; proxy_connect_timeout 2; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } the problem is the "location /context/" have to match to the context of backend server so when i request localhost/context/index.html then nginx routes it to 127.0.0.1:8080/context/index.html or 127.0.0.1:8080/context/index.html. Is it possible to have difference backend context and nginx location for example with "location /" nginx will routes the request to 127.0.0.1:8080/context/index.html or 127.0.0.1:8080/context/index.html Thank you.

  Read the article

• loadbalancing with difference nginx location context and backend context

  - by robinmag

  Hi, I used nginx and upstream module for load balancing with the following config upstream lb { server 127.0.0.1:8080; server 127.0.0.1:8081; } server { listen 88; server_name localhost; location /cas/ { proxy_pass http://lb; proxy_redirect off; proxy_connect_timeout 2; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } the problem is the "location /context/" have to match to the context of backend server so when i request localhost/context/index.html then nginx routes it to 127.0.0.1:8080/context/index.html or 127.0.0.1:8080/context/index.html. Is it possible to have difference backend context and nginx location for example with "location /" nginx will routes the request to 127.0.0.1:8080/context/index.html or 127.0.0.1:8080/context/index.html Thank you.

  Read the article

• Can I use nginx to start EC2 instances on demand?

  - by Gabe Hollombe

  TL;DR - Is there a way to make nginx act as an elastic load balancer that will spin up EC2 instances on demand, allowing for the case when periods of no demand mean no instances will be running? Longer explanation - I have an nginx server that proxy_pass'es requests to a server on EC2. This server doesn't get many requests, so I'd like to keep the server spun down during periods of inactivity (I already have a script to do this). Then, when the instance is spun down and nginx gets a request for that instance, it will time out when trying to get a response from it. At this point, can I somehow trigger a shell command on the server to use EC2's command line tools to spin up the instance, then re-try the user's request after it has started?

  Read the article

• Good Books About Scaling Up Databases/Servers/etc.?

  - by Mehrdad

  I've applied for an internship at a startup company that expects its user base to grow by a large factor in a small amount of time, and so part of their project is to scale everything up so that they're ready: handling more/larger requests efficiently, handling server failures, load balancing, getting more JavaScript to run faster on the client computers, etc. Part of my job will also be figuring out what to do, so it's not obvious what my exact task will be at the moment. I was told that I should start reading up a little more about this so that I would have a little bit of an idea of what to do. What are some good books for me to read on this topic? I have a little bit of experience with the usage of MySQL (and also a little experience with web development), but in no way do I claim any knowledge on the internal workings of databases or distributed systems, so I might need readings more on the introductory side.

  Read the article

• LVS TCP connection timeouts - lingering connections

  - by Jon Topper

  I'm using keepalived to load-balance connections between a number of TCP servers. I don't expect it matters, but the service in this case is rabbitmq. I'm using NAT type balancing with weighted round-robin. A client connects to the server thus: [client]-----------[lvs]------------[real server] a b If a client connects to the LVS and remains idle, sending nothing on the socket, this eventually times out, according to timeouts set using ipvsadm --set. At this point, the connection marked 'a' above correctly disappears from the output of netstat -anp on the client, and from the output of ipvsadm -L -n -c on the lvs box. Connection 'b', however, remains ESTABLISHED according to netstat -anp on the real server box. Why is this? Can I force lvs to properly reset the connection to the real server?

  Read the article

• Looking for the best ec2 setup for 3 sites totaling in 1.5 mil in traffic monthly

  - by john h.

  I am looking to consolidate our current aws setup of 2 Large ubuntu ec2 servers and 2 large RDS server for our 3 websites that have a total of about 1.5 million hits a month and increasing every month with the majority of traffic (1 mil) to one forum site in the group and the rest of traffic to an ecommerce site and a small wordpress site. So here is my question/thought? Would it be better for us to combine the two ec2 large servers to just one and same with the 2 RDS servers so we run all three sites off one large ec2 and one RDS. -or- Should we setup maybe 2-3 smaller ec2 servers load balenced and a single RDS. -or- Something completely different setup? One concern is that if one site crashes it takes with it the others. It happened in the past but I am pretty sure its because of the forum software and not the server setup. -john

  Read the article

• Loadbalance UDP traffic with session affinity and way to take servers in & out of rotation

  - by William

  What is the best way to go about load balancing UDP traffic among a whole bunch of servers, while keeping session affinity based on the users' IP? I need to also be able to take servers in and out of rotation for new clients, so when they join for the first time, they get put on a server in a list of available servers, and clients already connected would stay connected to their specific server. I have written the software to maintain a list, but I can't seem to find anything that would perform this functionality. If you need the context, this is to facilitate game tournaments for Minecraft: Pocket Edition, which is done with UDP traffic, I cannot change the protocol. And, because tournaments open and close, I need to be able to place players on their proper servers. Performance is also a priority, I have a program to do this but it is very bloated and slow. Thanks for any help! William

  Read the article

• Existing connexion on Apache and mod_proxy_balancer don't fail over second JBoss node

  - by Jean-Rémy Revy

  I have a Jboss farm, load balanced by Apache HTTP + mod_proxy_balancer and mod_proxy_ajp, with the following configuration : <VirtualHost *:80> ServerName web-gui-acceptance.myorg.com ServerAlias web-gui-acceptance ProxyRequests Off ProxyPass /web-gui balancer://jbosscluster/web-gui stickysession=JSESSIONID nofailover=On ProxyPassReverse /web-gui http://srvlnx01.myorg.com:8080/web-gui ProxyPassReverse /web-gui http://srvlnx02.myorg.com:8080/web-gui <Proxy *> AuthType Kerberos [...] </Proxy> <Proxy balancer://jbosscluster> BalancerMember ajp://srvlnx01.myorg.com:8009 route=SRVLNX01_node1 BalancerMember ajp://srvlnx01.myorg.com:8009 route=SRVLNX02_node1 ProxySet lbmethod=byrequests </Proxy> </VirtualHost> When the first JBoss node fail (the hosting VM is down), my existing connexions don't fail over the second node ... the fist route is keeped (in table / .shm ?) and that provide me 503 errors. Can someone tell me what I missed ?

  Read the article

• Round-Robin DNS in mobile networks

  - by k7k0

  After reading load distribution alternatives and giving my limited skills on the area I'm biased toward round-robin DNS strategy. From what I understood, one key aspect of DNS Round-Robin is setting a low TTL value, avoiding caching. My main concern is that all my traffic comes from mobile networks, almost 30% of that comes from t-mobile 3G. Some questions: 1) Is there a chance that almost all clients on the same mobile network will be redirected to the same IP in the TTL frame? That would kill the distribution technique. 2) If I choose a really low TTL (zero or one). That impacts directly over client performance? It does a DNS miss every time or it's a setting that only impacts on DNS servers? Any help would be much appreciated. Thanks

  Read the article

• How to limit disk performance?

  - by DrakeES

  I am load-testing a web application and studying the impact of some config tweaks (related to disk i/o) on the overall app performance, i.e. the amount of users that can be handled simultaneously. But the problem is that I hit 100% CPU before I can see any effect of the disk-related config settings. I am therefore wondering if there is a way I could deliberately limit the disk performance so that it becomes the bottleneck and the tweaks I am trying to play with actually start impacting performance. Should I just make the hard disk busy with something else? What would serve the best for this purpose? More details (probably irrelevant, but anyway): PHP/Magento/Apache, studying the impact of apc.stat. Setting it to 0 makes APC not checking PHP scripts for modification which should increase performance where disk is the bottleneck. Using JMeter for benchmarking.

  Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >