Search Results

Search found 4421 results on 177 pages for 'knowledge craving'.

Page 76/177 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

• NATing with a single-homed machine possible?

  - by Harry

  I have the following setup: a) a single-homed machine, A, that can see the Internet. b) other machines B, C, and D that cannot see the Internet. c) A, B, C, and D can see each other. d) all machines are running either RHEL 5.3 or Fedora 16. Question: Is it possible to have B, C, and D share the Internet connection with A somehow? Note, again, that machine A does not have a second NIC installed. (The solutions that I am finding on the Net assume A to be a dual-homed system!) Also, could you please recommend a set of book(s) or online resources for a current and in-depth coverage of iptables for people with only a basic knowledge of TCP/IP?

  Read the article

• Can you suggest some DIY PC specs for 1) Value, and 2) Future 'upgradability'?

  - by user17381

  Hi, I'm considering building a new desktop PC from components. For the last 7/8 or so years I have almost exlusively used laptops, and so have fallen behind a bit with knowledge of various hardware technologies. Anyway, now I'm considering building a new desktop machine. Mainly for development work, but also would be nice to do a bit of gaming. The two main criteria are: I would like the first build to be relatively low cost. I would like to select components that will allow me to upgrade in the future without throwing too much away. Can anyone recommend a setup? Thanks

  Read the article

• prevent use of 'net user' command to change passwords on windows vista / xp

  - by guest

  hello the point is, if i'm logged in (and as almost every windows user, i've got an admin-account), and someone comes across my not locked pc, it is possible to change my password the pro-way through using: net user Admin %NEW_PASSWD% what can i do to prevent that, besides not being logged in as admin. i once saw a way, where the 'net user' command was substituted by a .bat file. so if you call 'net user Admin ...', it runs this .bat-file instead, which locks the notebook immediately. problem is, i honestly don't know how i could let windows substitute eg net.exe with a .bat-file. (too little windows knowledge) do you know any way how to do it? i'd appreciate it.

  Read the article

• Does a single LACP channel over multiple switches increase redundancy?

  - by Sirch

  I am curious for opinions, findings, or evidence that having multiple interfaces bonded using LACP to ports in multiple switches can increase redundancy. Previously bonded interfaces have always been to a single switch, with a redundant channel to another port. Without getting into vendor specifics, my thought is that as this is a single LACP, the likelihood that an event or change could lead to a wide service outage. Without having the spare equipment or time to test this single channel over diverse switches, could anyone with a greater networking knowledge than myself, tell me if there a network side event that would bring down the network connectivity to a server that had created a bonded interface to two ports on separate switches? Does the use of bonded ethernet channels across multiple switches (that we are advised that we can use) from the server, provide both improved throughput (unquestionably), and improved redundancy (uncertain). Could/would network events such as switch failure, port migration, patching, recovery, etc, cause the channel for both server network interfaces to be unavailable? Thanks in advance.

  Read the article

• FreeBSD after motherboard replacement; should I have any concerns?

  - by cc

  So after three years my motherboard (Asus M2N-0MX) has died off. As I go shopping for i's replacement tomorrow I have a concern about the data that I currently have on the drives wtihin. I'm currently running BSD 6.2, and am wondering if there would be any concern with installing a new OS on that system, would it be better to jsut install the latest BSD version, and are their any pitfalls that I should watch for to make sure I don't end up losing 750gb's of data. The setup consists of the following(to the best of my knowledge): Pioneer DVD drive 3ware RAID card four 250gb SATA drives in RAID 5 config thanks to anyone that can offer some advice, or just to confirm if I am over thinking things.

  Read the article

• Why does my iTunes use so much CPU time?

  - by bikesandcode

  I have a roughly 2 year old Macbook (10.5). I have iTunes 10. When iTunes is playing MP3s, I see CPU usage of the iTunes process in the system monitor ranging from 65%-75%. When I pause the music, I see CPU usage of about 65%-75%. I do not have any visualisations going, to my knowledge I have not turned on any CPU destroying features, my music library isn't tiny, but it's hardly huge (3GB). This is mildly annoying when I'm plugged into the wall as I only have slightly longer compile times, but if I am out and about, this is a major drain on the battery. Using VLC I see CPU loads of ~= 10% at the most when listening to music and generally lower. What the heck is iTunes doing?

  Read the article

• How to bypass Forefront TMG for downloading from Adobe Cloud

  - by user1006272

  I hope that this question has not been asked as I've spent a couple of days googling around trying to find a solution. I have one computer that needs to download from Adobe Cloud to install applications like Photoshop etc... The issue I'm having is that Adobe uses a download manager program (AdobeApplicationManager.exe) that just keeps incrementing the time left on the download of any app like Photoshop. Is there a way to allow just the download manager from that one computer to bypass any filtering settings in Forefront TMG 2010? I have very little knowledge of servers / ISA servers / Forefront TMG and have been thrown into this position by luck I guess. Any help with this would be highly appreciated. Thanks in advance.

  Read the article

• Do you know of any ways to effectively manage a triple screen setup brightness?

  - by nizm0

  I use a desktop with multiple monitors I have tried F.lux and it is a great app for changing the color from 3500k-6500k... but doesn't adjust screen brightness. (I recommend you try it) I've googled for hours trying to find an app that will work to let me easily manage screen brightness either by a "dim when idle" or a dynamically updating screen brightness based on the time of day. Windows 7 desktop doesn't seem to have options for me to adjust brightness on the system, and manually changing three separate monitors is too much of a chore? Anybody have some recommendations? Perhaps a way to script this, knowledge of how to use the supposed dynamic screen brightness functions that Windows was supposed to add in Windows 7?

  Read the article

• VPN is working, except for DNS lookups. Firewall (Cisco ASA 5505) issue?

  - by macke

  I've got the following set up: LAN -> DHCP / DNS / VPN server (OSX 10.6) -> Cisco ASA 5505 -> WAN Connecting to the LAN via VPN works fine. I get all the details properly and I can ping any host on the internal network using their IP. However, I can't do any host lookups whatsoever. I've looked through the logs on and found this nugget in the firewall log: 3 Sep 08 2010 10:46:40 305006 10.0.0.197 65371 portmap translation creation failed for udp src inside:myhostname.local/53 dst inside:10.0.0.197/65371 Port 53 is dns services, no? Because of that log entry, I'm thinking that the issue is with the firewall, not the server. Any ideas? Please keep in mind that I have very little knowledge and experience with this kind of firewall and the little experience I do have is with the ASDM GUI console, not the CLI console.

  Read the article

• Macro - maintain paste link if new row is added to master spreadsheet

  - by Ross McLaughlin

  I have a master spreadsheet that has a portion of data (say columns a to e) that paste links to a report. Each row paste links to its own report. If I add a new row to the master spreadsheet I now have the wrong data linking into my reports. I know if I have the reports open when a change is made to the master it will update the reports. However, with the number of reports I will soon have this will no longer be practical. Is there a macro or formula that can be added to maintain the correct data link. I have no real knowledge on such matters and as much information as possible would be greatly appreciated. Many thanks in advance.

  Read the article

• Reasons for Wi-Fi to be slower on Ubuntu compared to Windows?

  - by den-javamaniac

  I'm using 64-bit Ubuntu 12.04 and Windows 7 64 bit – dual boot on the same computer. Connecting to the same wireless network. And it turns out that on Windows I get a more stable and stronger signal than on Ubuntu. To my knowledge there's a router which serves as a gateway and then there's a cable connected to the router which goes further to ISP, so the results for both OS should be the same. I've tested the issue on both OSs at various times and it gave me the same result. The question is why? Why Ubuntu networking is worse than that of Windows?

  Read the article

• How do I make YouTube videos fill up an entire screen when using dual monitors?

  - by Jephir

  I am using a dual monitor setup on Ubuntu 9.10 using the TwinView configuration in NIVIDA X Server Settings. My total resolution is 2960x1050 pixels, and my individual monitors are 1680x1050 (primary) and 1280x1024 (secondary). When going into fullscreen mode on any video on YouTube, I only see a cropped version of the video on my primary display as seen below. This does not occur on any other video sharing website - they properly make the video to fill the entire screen on my primary monitor. To my knowledge this problem only happens on YouTube.

  Read the article

• Rate of UDP packet loss over WLAN

  - by Martin

  While testing something with TFTP I noticed lots of timeouts (and slow speed as result) when I used my WLAN - and no problems when using a network cable. A quick test program sending/receiving UDP revealed that there are about 3-5% packets lost. While it's obvious that WLAN has to be less reliable than LAN, I have no knowledge what loss rates are considered 'normal' - and when there is a need to further investigate the network infrastructure. Are there 'typical' packet loss rates on WLAN (and other network technologies e.g. PowerLAN, WAN, ...? Thanks

  Read the article

• Multiple EyeFinity Display groups

  - by Shinrai

  Is it possible with an EyeFinity enabled card to make multiple display groups at once? I was playing with a FirePro 2460 and while a 4x1 or 2x2 display group works quite nicely, if I make a 2x1 display group and then select one of the other displays to try to make a second 2x1 display group, it disables the first one. Is there any way to circumvent this behavior and set up two separate spans on the same card? Additionally, can you set up distinct display groups if they're on different cards? I will have the opportunity to test several of these cards in one machine very shortly, but I'm curious if anyone has any experience. EDIT: I can confirm that you can make multiple spans on multiple cards (as long as they don't cross cards, obviously) (If the answers are different for FirePro/FireMV cards and Radeon cards, that is helpful and relevant knowledge - I doubt it, though.)

  Read the article

• Excel: How do I copy hyperlink address from one column of text to another column with different text?

  - by OfficeLackey

  I have a spreadsheet where column A displays names in a certain format. There are 200-odd names and each has a different hyperlink (which links to that person's web page). I want to reformat the name order so it is "Surname, Name" rather than "Name Surname" and retain the hyperlink in the newly formatted column. I have achieved "Surname, Name" easily by splitting the names into two columns (using LEFT and RIGHT formulae) - forename and surname - then I have a new column with a formula to return "Surname, Name." However, the hyperlinks are not in that new column and I need them. I don't want to do this manually, for obvious reasons. I cannot find a way of copying just hyperlinks from column A without copying the text from column A. So, effectively, what I need is some sort of macro to take, for example, the hyperlink from A2 and copy it to H2, with H2 still retaining the updated ordering of name. I don't have the knowledge to write this myself, so would appreciate solutions.

  Read the article

• Using VMware's ESXi, can I plug in 30 USB Wireless adapters and allow each of 30 VMs one?

  - by 31eee384

  I'm assuming ESXi will act very similarly to VMware Workstation or other products, so answers based on knowledge of those programs might also help. I want to plug in 30 USB Wireless or Ethernet adapters into my server, and let each VM access one and only one of these devices. Unfortunately, I don't have the hardware to just try it out as the purchase of hubs and adapters hinges on the result of this question. The answer could be a resounding "yes, easy!" and that would be great. I couldn't find any answers to this question with google, and it's possible that this is because it's so easy to do. Thanks!

  Read the article

• Ubuntu server 11 showing weird characters on console

  - by andySF

  I've installed Ubuntu server 11 after my last hard drive failed to perform. The install process and GRUB screen are OK but I have a problem with the console. I attached two photos because it's difficult for me to describe this issue. I have little knowledge about Linux. My server is used for git, file server, print server. I played with this command dpkg-reconfigure console-setup but no effect. It's nothing physicality wrong with my display or my memory(it's on board). I have run a memtest, and besides that withe the previous version of Ubuntu I've had no problems. The problem.

  Read the article

• DVD stops working in windows 7 64 bit

  - by Skadlig

  I have the same problem as described in this question: http://superuser.com/questions/105928/dvd-cd-rom-drives-stop-working-in-windows-7 I know I have got some games that are using starforce and/or securerom. What I don't have is the upper and lower filter in my registry tag. Oh and a reboot temporarily fixes my problem. After a random time though it goes missing again. I found a Microsoft knowledge base article regarding this but since I didn't have the filter tags they couldn't help me. Does anyone have any other tips bar removing the despicable drm:s? I would like to go on playing my games so that is not really an option for me.

  Read the article

• Why doesn't openSUSE Linux upgrade itself through its software repositories?

  - by Dougal

  openSUSE - fast becoming my favourite Linux distro on the client - doesn't seem to upgrade itself through its own configured software repositories. Do we know why this is the case? Is it a money-making thing where they can then sell upgrade CDs / DVDs? I mean, pretty much every other Linux upgrades itself through the normal software repositories. For example, Ubuntu can upgrade itself from 10.4 to 10.10 just through the normal software package upgrade procedure. Why must it be a huge procedure to upgrade openSUSE? Any knowledge or ideas appreciated. Thank you.

  Read the article

• Using VMware's ESXi, can I plug in 30 USB Wireless adapters and allow each of 30 VMs one?

  - by 31eee384

  I'm assuming ESXi will act very similarly to VMware Workstation or other products, so answers based on knowledge of those programs might also help. I want to plug in 30 USB Wireless or Ethernet adapters into my server, and let each VM access one and only one of these devices. Unfortunately, I don't have the hardware to just try it out as the purchase of hubs and adapters hinges on the result of this question. The answer could be a resounding "yes, easy!" and that would be great. I couldn't find any answers to this question with google, and it's possible that this is because it's so easy to do.

  Read the article

• Files copying between servers by creation time

  - by driftux

  My bash scripting knowledge is very weak that's why I'm asking help here. What is the most effective bash script according to performance to find and copy files from one LINUX server to another using specifications described below. I need to get a bash script which finds only new files created in server A in directories with name "Z" between interval from 0 to 10 minutes ago. Then transfer them to server B. I think it can be done by formatting a query and executing it for each founded new file "scp /X/Y.../Z/file root@hostname:/X/Y.../Z/" If script finds no such remote path on server B it will continue copying second file which directory exists. File should be copied with permissions, group, owner and creation time. X/Y... are various directories path. I want setup a cron job to execute this script every 10 minutes. So the performance is very important in this case. Thank you.

  Read the article

• consulting a network admin for rails and php applications

  - by Karo Devos

  Hi I'm a web developer who writes most of the time rails applications. Next month I'm going to switch from my current VPS to linode. I'm wondering how much it would cost to properly set (or teach me how to do it) everything to get my app up and running. My requirements are probably: nginx/apache, REE/ruby, passenger, full blown php environment, system wide RVM, search engine such a sphinx, being able to perform cronjobs. I have some knowledge of unix and I was able to install everything I needed on my development system. However I had quite a few issues setting up everything on my production server.

  Read the article

• How to harden windows 2003 service account

  - by ITMan

  I remember there was a tech-net or WindowsITpro article about how to harden windows 2003 service accounts a couple of years ago. For backup software purposes (such as BackupExec / AppAsure / Etc.. , please don't bash these) I have to create a domain admin account (usually called something such as "backup") and have the services run from that account. In this article I remember you can create the domain admin user "Backup" however have it not able to login interactively. Do any of you remember such an article or have the knowledge on how to do it?

  Read the article

• Block Domain User login

  - by Param

  I have created a Domain User id ( for example - Auser ). I have integrated my LDAP login with Firewall. I use this user to login in to firewall only. So, I want to block all the login for this User except on Firewall. Is there any way to accomplish this? As per my knowledge, we can specify :- By right click on Domain User -- Properties -- Account tab -- Logonto ( but here we have to specify Computer Name, we don't have any computer name for Firewall -- So i can't use this option ) Through Group Policy Window Setting -- Security Setting -- Local Policies -- User Rights Assignment -- Allow logon Locally (But it has to apply on Computer OU -- So i can't use this option also ) Any Other Option you know ??

  Read the article

• Looking for a way execute a task on all files in a directory (recursively) on Windows

  - by stzzz1

  I have a huge number of mp4 video files that needs to have a volume boost. I need a way to execute a ffmpeg audio filter on all files in a specified base directory (and in subdirectories as well). My problem is that I'm working on a Windows computer and I have no knowledge of its shell syntax. I would like to do the equivalent of what this bash script does : TARGET_FILES=$(find /path/to/dir -type f -name *.mp4) for f in $TARGET_FILES do ffmpeg -i $f -af 'volume=4.0' output.$f done I spent quite some time this afternoon looking for a solution but the recursive nature of what I need (that is so simple with find!) isn't too clear. Any help would be greatly appreciated!

  Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >