Search Results

Search found 26285 results on 1052 pages for 'grant back'.

Page 763/1052 | < Previous Page | 759 760 761 762 763 764 765 766 767 768 769 770  | Next Page >

• Installing ubuntu 12.04, installs but does not boot after it asks me to remove the CD

  - by Randnum

  I'm Trying to install Ubuntu 12.04 on my computer. It had an old copy of Windows 7 on it I tried to reformat the hard drive for a fresh install of Ubuntu but I think I messed up the partitions in some way that prevents it from fully loading. I'm able to complete the install fine and use guided partitioning so it should be happy but when it gets about 90% through at the part that ejects the cd and restarts the system it fails. After ejecting the CD and restarting it just loads up the bios lenovo splash screen then purple then black. I can hear a sound from my speakers like some notification sound but there is no text on my screen. I've since gone back in under Rescue System to try and reconfigure the partitions hoping that it will fix it and i've tried several combinations. Currently it's SCST1 (0,0,0) (sda) - 500.1 GB ATA WDC WD5000AAkKX-0 #1 100.0 MB K biosgrub #2 494.1 GB B K ext4 / #3 5.9 GB F swap swap 8.2 kb FREE SPACE I'm not sure if I need to set the ext4 to contain the boot flag but if I don't include at least one partition with the boot flag enabled it complains saying that "The partition table format in use on your disks normally requires you to create a separate partition for boot loader code. This partitionshould be marked for use as an "EFI boot Partition" and should be at least 35 MB in size. Note that this is not hte same as a partition mounted on /boot" Like I said it seems to have installed all of the actual data from the CD it's just not properly booting for some reason

  Read the article

• Can't get an IBM xSeries 345 server to load Windows Server 2003 using ServerGuide utility

  - by Kyle Noland

  I have a client that has an IBM xSeries 345 eServer. Per the IBM support website, I have downloaded the ServerGuide Setup 7.4.17 installation ISO and burned a bootable CD. The CD boots fine and loads the utility. I walk through the following screens without any issue: Set the date and Time Detect the IBM ServeRAID card and install the latest firmware Clear the hard disks Set up the RAID array The next step is format the NOS partition. I select my partition size and the utility goes through the following steps: Creating NOS partition Formatting NOS partition (NTFS) Copying W32 files The copying W32 files takes about 10 minutes. I see the CD drive and disks working hard. When the copying is complete, I'm taken to a blank page just NOS Partitioning at the top. At the bottom of the screen are the familiar Back and Exit buttons. I see the place where the Next button should be, and if I click on it I can tell there is something there, but the space is empty. No button is displayed and clicking the empty spot doesn't ever take me to the next screen. I can't load the OS until I get past this part. I have already tried: Burning multiple copies and versions of the ServerGuide CD Letting the final screen just sit there over the weekend thinking it might advance after syncing the drives or something Has anybody else seen this? I'm really at a loss here. EDIT: I found another person who has the exact same problem as me: http://www.ibm.com/developerworks/forums/thread.jspa?messageID=14451763

  Read the article

• Memory leak in Google Chrome

  - by jasondavis

  As a developer it is very common for me to have 2-3 different IDE's open, 10-15 google chrome windows which can hold up to 200 open tabs (I know I get out of hand some times), Photoshop, couple twitter bots for promo, and a few other programs but my system still runs fast and smooth. I have an i7 processor with 12gb ram. Now with all my usual stuff running my Physical memory is usually running around 50-60% however over the course of the day or much less even, I will gradually grow to 98% The highest Memory usage processes will be from Google Chrome, if I sort in the task manager by highest memory usage and end the 1 highest process which will be a google chrome one, my memory usage will jump back down to about 60%. Also by ending that 1 process, all my Chrome windows will remain open and in use, so it doesn't affect me at all by ending that process. Based on this research I am assuming that that 1 runaway process is likely the Adobe Flash as I also can say that it gets up to the 98% much faster when I am using flash items like video or music player. But even without using any of them it will still climb up to that high number eventually. Has anyone else experienced similar results?

  Read the article

• SQL Server 2008 Unique Problem for bring DB Online...

  - by Nai

  This is my error I am facing TITLE: Microsoft.SqlServer.Smo Set offline failed for Database 'Go3D_Retailer ------------------------------ ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) Unable to open the physical file "E:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\ftrow_Go3D_catalog.ndf". Operating system error 2: "2(failed to retrieve text for this error. Reason: 15105)". Database 'Go3D_Retailer' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. ALTER DATABASE statement failed. (Microsoft SQL Server, Error: 5120) Background to this error I've been trying to move my destination logshipping database to another physical server for analysis purposes. Because I do not have active directory set up, I had to hack my process by using the same username/password for both the source and destination servers to get the process to work. Following that, I used this guy's solution to move the destination database to another server. However, this error occurs when I try to bring the database back online. I don't have an E drive on my server and I have no idea why it's trying to open a file from E drive. I have over a 100gb left on my hard disk so it's definitely not a space issue. This sounds like a bug... Any ideas? I'm running SQL Server 2008 Enterprise edition on Windows Server 2008 R2 64bit

  Read the article

• get-eventlog issue

  - by Jim B

  I wanted to get a quick report of some log entries I saw on a server, so I ran: Get-Eventlog -logname system -newest 10 -computer fs1 | fl I got events back however the descriptions were all wrong. Here's an example: Index : 1260055 EntryType : Warning InstanceId : 2186936367 Message : The description for Event ID '-2108030929' in Source 'W32Time' cannot be found. The local compute r may not have the necessary registry information or message DLL files to display the message, or you may not have permission to access them. The following information is part of the event:'time. windows.com,0x1' Category : (0) CategoryNumber : 0 ReplacementStrings : {time.windows.com,0x1} Source : W32Time TimeGenerated : 1/25/2010 10:43:31 AM TimeWritten : 1/25/2010 10:43:31 AM UserName : Note that if I pull the event ID property it's correct (in this case 38) Is this is known issue or is something wrong. The messages resolve fine via event viewer locally and remotely Here is the powershell version info: Name : ConsoleHost Version : 2.0 InstanceId : bc58fcf8-bba3-4ca8-8972-17dbd5d9ff08 UI : System.Management.Automation.Internal.Host.InternalHostUserInterface CurrentCulture : en-US CurrentUICulture : en-US PrivateData : Microsoft.PowerShell.ConsoleHost+ConsoleColorProxy IsRunspacePushed : False Runspace : System.Management.Automation.Runspaces.LocalRunspace Here is the revised version info: Name Value ---- ----- CLRVersion 2.0.50727.3603 BuildVersion 6.0.6002.18111 PSVersion 2.0 WSManStackVersion 2.0 PSCompatibleVersions {1.0, 2.0} SerializationVersion 1.1.0.1 PSRemotingProtocolVersion 2.1

  Read the article

• Don't let the mouse wake up displays from standby

  - by progo

  I like to put my displays to powersave/standby mode when I leave the computer for a while. It would be ok if it weren't for oversensitive mouse. Sometimes the driver reads in some movement that's not visible to the naked eye (the cursor, that is) and it breaks the power save. It would wait for another 10 minutes before going back to its standby. My workaround is the following script bound to C-S-q: xlock -startCmd 'xset dpms 2 2 2' -endCmd 'xset dpms 600 1200 1300' -mode blank -echokeys -timeelapsed +usefirst By using xset I set the values to 2 seconds each before going to standby. It's not nice, anyway. Sometimes there are cool fortunes that I want to read before typing in the password. I could keep the cursor moving but it's cludgy. (By the way, xlock's option mousemotion doesn't help -- it just hides the cursor but the displays fire up nevertheless.) So the question: is there a way to make displays go standby and stay there until a keyboard key is pressed? I'm running gentoo and recent Xorg, but I hope the answer doesn't have to be distro-specific. Basically the answer can be as simple as how to enable/disable mouse within command line? It think that would do the job if DPMS doesn't know the idea.

  Read the article

• award phoenix bios not recognizing my sata hdd.

  - by josh

  What am I doing wrong? I have a custom built comp with a Fatal1ty AA8XE mobo. It has 4 SATA ports and one IDE port. When i first got it, I had a really hard time putting in more than one hard drive. Right now i have one 120gb IDE HDD on master and my DVD+-RW on slave connected to the one IDE spot on the mobo. I ripped a bunch of movies and filled up my HDD, so I got a WD 80gb SATA drive. I plugged it into SATA1 and hooked up the power, turned on comp, went into bios. The only thing in any option in any of the menues in this crazy lookin bios is a thing that says "SATA mode". i put it on IDE, set it so PATA is primary, SATA is secondary. booted up my comp, nothin. Not recognizing the SATA. I went back into the bios and checked it all again. I saw that it says SATA2 and SATA4 are the secondaries so i put it on SATA2, booted, nothing, same with SATA4, same with SATA3, all same as SATA1. Bios and wt os are not recognizing the drive as being there at all. I even downloaded and printed the almost 100 page manual for the mobo, read the entire thing, and still can't figure it out. I know there are a lot of people out there smarter than me when it comes to computers. So please, somebody, anybody, please tell me something that I'm not seeing. Some setting somewhere that I didn't configure right. There is something, obviously, but I can't find it. As far as i can tell, everything is set perfectly fine for my 120gb to be the master and the SATA to be the slave. I don't know what I'm doing wrong but I'm seriously about to throw this computer out the window. thankyou in advance to whoever attempts to help.

  Read the article

• Auto load balancing two node Cluster Hyper-v 2008 R2 enterprise?

  - by Kristofer O

  My setup is a 2 node cluster with 72GB ram each and a ~10TB MD3000i Iscsi SAN. I have about 30VMs running I keep about 15 on either server. I do a live migration to the other server if I need to run updates or whatever... Either one of the servers is able of running all VM if needed, but the cpu is pretty high. Here's my issues. I know Hyper-v has a limit of a single Live-migration at a time. But Why doesn't it queue them up to move one at a time? If I multi select I don't get the option to live migrate a one at a time. OR if I'm in the process of Migrating one it will give me an error that it's currently migrating a VM... Is there a button I missed that will tell a Node that it needs to migrate all the VMs elsewhere? Another question, does anyone know whats the best way to load balance VMs based on CPU and/or network utilzation. I have some VMs that don't do much. and some that trash the CPU or network. I'd like to balance it out on both servers if at all possible. and Is there any way to automate it? last question... If I overcommit my Cluster is there a way to tell the cluster that I want certian VMs the be running and to savestate other VMs based on availible system resources? Say when my one node blue screens and the other node begins starting the VMs up. I want the unimportant ones to shutdown or savestate so the important ones can stay running or come back online. Thanks just for reading all that. Any help would be great.

  Read the article

• Weird mouse/keyboard freezups when using PowerPoint 2007 with IBM/Lenovo docking station

  - by DanM

  I'm not sure what part of my system is responsible for this, but when using PowerPoint, I have problems when trying to resize drawing objects. I'll be dragging the handle and suddenly, the object will deselect and whatever is behind the object will select and start moving around. Next thing I know, the keyboard won't type anymore, and the only way to fix it is to unplug the USB and plug it back in. In case it's hardware related, I'm using an IMB Thinkpad T60P in a docking station. My keyboard is a Microsoft Natural Keyboard Pro. My OS is Windows XP SP3. I've never noticed this happening in anything besides PowerPoint, and I don't know anyone else who has this problem (even people with similar setups). Any ideas what it could be? Edit Well, it looks like I only get the problem if I plug the mouse into my docking station's USB. If I plug directly into the laptop's USB, everything works fine. And, again, this problem is only with PowerPoint. I tried playing with some drawing objects in Word and had no issue no matter where my mouse was plugged in. I should also mention I tried a different mouse (a standard Microsoft corded mouse instead of my Logitech trackball), but that made no difference. So, I don't think it's anything specific with the trackball or the trackball's driver. I tried searching Google but came up empty, so I'm guessing this problem is something unique to my setup. If you have any thoughts or ideas to try, I'd love to hear them.

  Read the article

• How can I view the binary contents of a file natively in Windows 7? (Is it possible.)

  - by Shannon Severance

  I have a file, a little bigger than 500MB, that is causing some problems. I believe the issue is in the end of line (EOL) convention used. I would like to look at the file in its uninterpreted raw form (1) to confirm the EOL convention of the file. How can I view the "binary" of a file using something built in to Windows 7? I would prefer to avoid having to download anything additional. (1) My coworker and I opened the file in text editors, and they show the lines as one would expect. But both text editors will open files with different EOL conventions and interpret them automagically. (TextEdit and Emacs 24.2. For Emacs I had created a second file with just the first 4K bytes using head -c4096 on a linux box and opened that from my windows box. I attempted to use hexl-mode in Emacs, but when I went to hexl-mode and back to text-mode, the contents of the buffer had changed, adding a visible ^M to the end of each line, so I'm not trusting that at the moment. I believe the issue may be in the end of line character(s) used. The editors my coworker and I tried (1) just automagically recognized the end of line convention and showed us lines. And based on other evidence I believe the EOL convention is carriage return only. (2) return only. are able to recognize and To know what is actually in the file, I would like to look at the binary contents of the file, or at least a couple thousand bytes of the file, preferablely in Hex, though I could work with decimal or octal. Just ones an zeros would be pretty rough to look at.

  Read the article

• Making always-on-top windows follow the same MRU order as other windows

  - by nitro2k01

  Note: I'm using Windows 7 with the classical alt-tab style, ie the registry key AltTabSettings set to 1. I want to use MRU (most recently used) ordering of windows in the alt-tab list. However, because the windows are ordered in the Z order of the windows rather than actual MRU, this sometimes gives a different order after switching from an always-on-top application. Example: I have applications A, B and C open. A is set to always-on-top while the others aren't. A is focused. I now press alt-tab and application B is focused. I now press alt-tab but instead of application A receiving focus, application C does. Since A has a higher Z order, it's now left of application B, despite being the most recently used, and application C is placed right of B and is the one first getting focus by the cursor. To switch to application A, I need to press shift+alt-tab or cycle through all the other open windows. This is annoying when flicking focus back and forth between an always-on-top application and one that isn't always-on-top. Is there a way to make the alt-tab ordering strictly MRU?

  Read the article

• Need a VM for running a PHP Sandbox

  - by Phani

  I am working on Web application honeypot. It collects PHP files it receives (as part of an RFI attack) and runs them in order to return the result back to the attacker. The aim is to coax the bad guy into going further into his attack. Based on the answers to my SO question, I am looking at using VMs for running the PHP Sandbox. The honeypot itself consists of Python code and will be running in a Linux environment (preferably Ubuntu-like). These are some of the requirements: The VM should be a light weight as possible. We are going to distribute the code around and many people are going to use the VM along with the Python based honeypot. So, the installation and configuration should not be too difficult. The guest system would also be Linux as we are going to distribute the VM image around. It should be possible for the Python code outside to talk to the guest system. It would be passing on the PHP file to the guest system and will get the output result from it. It should be possible to automate the initial configuration of the VM (such as allocation of RAM etc.) I would like to randomize these settings in order to make the sandbox less 'fingerprintable' I have looked at OpenVZ and KVM so far. Are there any other VMs that I might look at? What do you recommend?

  Read the article

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated. Edit: These are the kernel errors we see: 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. 3w-9xxx 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 3w-9xxx 0000:09:00.0: setting latency timer to 64 3w-9xxx: scsi0: ERROR: (0x06:0x000D): PCI Abort: clearing. 3w-9xxx: scsi0: ERROR: (0x06:0x001F): Microcontroller not ready during reset sequence. 3w-9xxx: scsi0: ERROR: (0x06:0x0036): Response queue (large) empty failed during reset sequence. 3w-9xxx 0000:09:00.0: PCI INT A disabled

  Read the article

• What is the advantage of not running as root? [closed]

  - by Shmuel Brill

  Possible Duplicate: What's wrong with always being root? All modern brands of Linux highly discourage (or disable) one from running as root instead of a normal user. I do not understand why. As a "normal" user, one could Download a rouge program from the internet. Run it (After all, one isn't root, what can it do). It installs itself in .bashrc or .xinitrc It writes a rouge "sudo" and "su" and adds . to the path Not noticing that . is in path, one runs sudo. The rouge program now has root password and can do anything it wants in the system. Even if 3-6 doesn't happen, the program could still Be part of a botnet. Read all files in the home directory and send them back (mine for SS#, Credit Card numbers, bank account numbers, etc). Send spam. Run a backdoor server to allow an attacker a chance to connect to the machine to determine vulnerabilities. It seems that the whole "permissions" thing (root/non-root) is just to prevent amateur crackers from getting into the system, so the question is: Is there a point in avoiding running as root, and is there a way to protect oneself if one wants to run unsafe code?

  Read the article

• Switch Text Paragraphs in OpenOfficeOrg Writer mailmerge

  - by Glen S. Dalton

  I am using mailmerge to write the same letter with minor differenes to many peolpe. I experienced that switching text paragraphs depending on database values was not easy for me. I ended up putting huge text paragraphs into the database becaus switching did not really work for me. Actually I dont' understand how writer does it and maybe the boolean evaluation is buggy? There is some possibility making paragraphs invisible depending on database fields, but it was frustrating. After marking a paragraph as invisible (depending on a condition) it went invisible in the main document and did not come back, I lost the content. An example in pseudocode of what I want in my mailmerge document: {if [[balance]] 10} We owe you money. Please can you send your bank details. {end if} {if [[balance]] < -10} Please transfer the remaining amount to our banc account 123... {end if} Maybe this could be done with makros? But how to combine makros with mailmerge? Can you tell me what are the pitfalls and how to master them? I once did this with ms word, it was a lot easier. The normal mailmerge (including database fields in the letters) works fine for me in OpenOffice writer.

  Read the article

• Cannot connect to server via SSH

  - by Rayne

  I'm running RHEL 6.0, and I accidentally moved the /bin, /boot, /cgroup, console.txt, /data, /dev, /etc to another folder. I think I managed to move these folders back, but now I'm having trouble connecting to the server using SSH, but am able to access the server via VNC. When I tried to connect to the server using a terminal from another server, I get the error ssh_exchange_identification: Connection closed by remote host I'm currently still connected via SSH to the server (haven't closed the window yet), and am still able to access it normally. But if I try to open a new SSH terminal from my current session, I see /bin/bash: Permission denied If I try to open a new SSH File Transfer window from my current session, I get the error File transfer server could not be started or it exited unexpectedly. Exit value 0 was returned. Most likely the sftp-server is not in the path of the user on the server-side I checked and I have Subsystem sftp /usr/libexec/openssh/sftp-server which is the same path as the output of locate sftp-server Also, when I tried to restart sshd, I get the error Couldn't open /dev/null: Permission denied But my /dev/null has the permissions crw-rw-rw- for root,root. How can I resolve this? ETA: Thanks for all your help! I was able to start ssh by running the application directly /usr/sbin/sshd Even though the status of the openssh-daemon is still "stopped".

  Read the article

• IIS 7.5 Siteminder Does not protect ASP.net MVC requests

  - by HariM

  We are trying to use ASP.Net MVC with Siteminder for Single Sign on. This is on Windows Server 2008 R2 with IIS 7.5. Siteminder Agent version 6QMR6. Problem : Siteminder protects physical files that are exist. And it is not protecting the folder when we try to access a non existed file. It must redirect to login page even if the file doesn't exist when the user is accessing a protected folder. How to configure in IIS 7.5 that Do not verify a file exist, before authentication by siteminder. SiteMinderWebAgent is a Handler(WildCard Script Map) we created using the ISAPI6WebAgent.dll How to Protect ASP.Net MVC Request with Siteminder? (Added this as My previous question did not solve the problem). MVC Request shows up in IIS Log but not in Siteminder log. Update : Microsoft Support says currently IIS7.5, even in earlier versions doesnt support wildcard mappings on any two Isapi Handlers with * wild card. Currently in my case Siteminder has * wildcard and asp.net mvc (handler is aspnet_isapi) has * wildcard to handle the reqeusts. Ordered priority doesnt work in the wild card mappings case with Just *. Did not convinced with the answer but will wait till tomorrow for them to get back.

  Read the article

• Play audio over network with Windows 7?

  - by Josh

  I have a unique situation where I'd like to stream audio (ALL audio, not just mp3s, etc) from my laptop to another computer over the network. I live in a studio apartment and my laptop is my main computer but I'd like it's audio to play on my htpc with a nice stereo system. Since it's a studio, both computers are in the same room so I don't want 2 sets of speakers. I want my computer to directly play back through the stereo. I used to do this with pulseaudio but my job now requires that I run Windows full time. I'm aware of Shoutcast and other similar streaming solutions but I don't want any transcoding done. It's a waste of CPU and not to mention my laptop fans, and I don't mind the network bandwidth that uncompressed audio requires. Is there a way to run Shoutcast without encoding? Also, I know that Windows Remote Desktop can play audio over the network pretty easily. Is this part of .Net that I could just code a simple app that streams the audio without RD'ing in? I also don't want to run it over a physical wire. :)

  Read the article

• Dual Xeon Server voltages are low

  - by Mindflux

  I've got a whitebox server running CentOS 5.7. It's a Dual Xeon 5620, 24GB of RAM. The mainboard is a SuperMicro X8DT6-F and the chassis is a SC825TQ-R720LPB. Dual 720W Power supplies. We had a big power outage a couple weeks back that took down everything, I don't have any pre-power outage figures for this server, and the only reason I noticed these is because when I was bringing up the servers I was checking them out with more scrutiny than usual. http://i.imgur.com/rSjiw.png (Image of voltage readings) As you can see, CPU1 DIMM is low, +3.3V is high, 3.3VSB is high, +5v is high, +12v is REAL LOW (out of normal 5% (plus/minus))... and VBAT is off the charts. With my whitebox VAR we've tried the following: Swap out PSU with another server I have with the same PSUs. Try different power cord Update BMC/IPMI firmware in case readings were wrong (They aren't) Update BIOS Try different PDU Try a different outlet and/or circuit Replaced Voltage Regulator Unit At this point, the only thing we haven't done, seemingly is replace the mainboard.. which is what the next step will be unless something else shines some light on the situation. I should mention the system is rock solid otherwise which is a surprise given the 12v voltage is that far off.

  Read the article

• Adding Static IP's to the NIC

  - by Brett Powell

  We are currently working on migrating a lot of new machines to our network, and my job this morning was to setup all of the IP Addresses. I worked on this all morning, and when I got back tonight I was informed that they had all been setup incorrectly, and had to be removed and re-added. I am quite confused as I have been setting up IP's on machines for a long time and I am curious as to what the issue is. Just taking into account this example... 72.26.196.160/29 255.255.255.248 A /29 block is 5 usable IP's. With the script I wrote and used, the IP Addresses .162 - .166 were added to the NIC. I can't remember now what the name for .161 was, but isn't it the broadcast address or something which isn't assigned to the NIC when adding additional IP Blocks? I am curious as to where my logic is failing me. Not to mention even if .161 was to be added, there is no reason why all of the IPs would have to be removed, as .161 could just be added in addition to these.

  Read the article

• r1soft agent is failing with the error: "write error while sending code: Broken pipe"

  - by curiousguy

  I have an Ubuntu 10.04.4 LTS server with r1soft agent installed in it. Recently, the backups are failing with the following error. -------- write error while sending code: Broken pipe -------- I have reinstalled the buagent but to no avail. On checking the server logs, I could see the following errors listed in it: -------- # tail -f /var/log/messages |grep -i buagent Nov 17 03:35:06 microscope buagent: Need to back up 126 sectors Nov 17 03:35:06 microscope buagent: (Righteous Backup Linux Agent) 1.79.0 build 12433 Nov 17 03:35:06 microscope buagent: allowing control from backup server (10.128.136.195) with valid RSA key Nov 17 03:35:06 microscope buagent: allowing control from backup server (10.128.136.201) with valid RSA key Nov 17 03:35:06 microscope buagent: sending auth challenge for allowed host at (10.128.136.201) port (47890) Nov 17 03:35:06 microscope buagent: host (10.128.136.201) port (47890) authentication successful Nov 17 03:35:06 microscope buagent: Backup request accepted. Starting backup. Nov 17 03:35:06 microscope buagent: Snapshot completed in 0.010 seconds. Nov 17 03:45:03 microscope buagent: Error reading blocks from snapshot. Nov 17 03:45:03 microscope buagent: Reading blocks failed Nov 17 03:45:03 microscope buagent: error backup aborted Nov 17 03:45:03 microscope buagent: backup failed on agent closing connection Nov 17 03:45:03 microscope buagent: Backup failed. Nov 17 03:45:03 microscope buagent: write error while sending code: Broken pipe (32) Nov 17 03:45:03 microscope buagent: tell child write failed -------- I tried changing the 'Timeout' and 'DiskAsPartition' value in '/etc/buagent/agent_config' file but no luck. Also, verified that proper route is added to the backup server. The agent is also running fine. Am I missing anything? Any help would be much appreciated. Note: CDP 2.0 is installed in the backup server.

  Read the article

• ZFS - Impact of L2ARC cache device failure (Nexenta)

  - by ewwhite

  I have an HP ProLiant DL380 G7 server running as a NexentaStor storage unit. The server has 36GB RAM, 2 LSI 9211-8i SAS controllers (no SAS expanders), 2 SAS system drives, 12 SAS data drives, a hot-spare disk, an Intel X25-M L2ARC cache and a DDRdrive PCI ZIL accelerator. This system serves NFS to multiple VMWare hosts. I also have about 90-100GB of deduplicated data on the array. I've had two incidents where performance tanked suddenly, leaving the VM guests and Nexenta SSH/Web consoles inaccessible and requiring a full reboot of the array to restore functionality. In both cases, it was the Intel X-25M L2ARC SSD that failed or was "offlined". NexentaStor failed to alert me on the cache failure, however the general ZFS FMA alert was visible on the (unresponsive) console screen. The zpool status output showed: pool: vol1 state: ONLINE scan: scrub repaired 0 in 0h57m with 0 errors on Sat May 21 05:57:27 2011 config: NAME STATE READ WRITE CKSUM vol1 ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 c8t5000C50031B94409d0 ONLINE 0 0 0 c9t5000C50031BBFE25d0 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 c10t5000C50031D158FDd0 ONLINE 0 0 0 c11t5000C5002C823045d0 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 c12t5000C50031D91AD1d0 ONLINE 0 0 0 c2t5000C50031D911B9d0 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 c13t5000C50031BC293Dd0 ONLINE 0 0 0 c14t5000C50031BD208Dd0 ONLINE 0 0 0 mirror-4 ONLINE 0 0 0 c15t5000C50031BBF6F5d0 ONLINE 0 0 0 c16t5000C50031D8CFADd0 ONLINE 0 0 0 mirror-5 ONLINE 0 0 0 c17t5000C50031BC0E01d0 ONLINE 0 0 0 c18t5000C5002C7CCE41d0 ONLINE 0 0 0 logs c19t0d0 ONLINE 0 0 0 cache c6t5001517959467B45d0 FAULTED 2 542 0 too many errors spares c7t5000C50031CB43D9d0 AVAIL errors: No known data errors This did not trigger any alerts from within Nexenta. I was under the impression that an L2ARC failure would not impact the system. But in this case, it surely was the culprit. I've never seen any recommendations to RAID L2ARC. Removing the bad SSD entirely from the server got me back running, but I'm concerned about the impact of the device failure (and maybe the lack of notification from NexentaStor as well). Edit - What's the current best-choice SSD for L2ARC cache applications these days?

  Read the article

• How to use Windows mini-dump files?

  - by ekaj

  I have a Mini-ITX Intel DH61AG mobo w/ an Intel i3 processor and 8GB of 1600MHz DDR3 RAM. Anyways, this computer has been crashing kind of frequently. It is not an OS problem, as I have used Ubuntu (and had kernel panics), Windows 7, and Windows 8 (BSODs aren't going to keep me from tinkering =p) Anyways, each of these OSes have had problems, so I ran a HDD check, and I know it is not a heat issue because I tested the processor for a few days when I first put the computer together. When I ran memtest86+, however, I got an error - so I did individual testing, and both chips came back good, did a really intense test with both of them again (took half a day), and no errors. So, I still think the problem could be RAM, but I am not sure - I tested it pretty extensively (might let it run all night again tonight)... which brings me to my point. Could someone explain to me (in simple terms if possible) how to READ the minidump files of Windows computers? I've tried before with a guide I found online, but failed miserably (can't remember guide, either =/). I'm fine with installing the software, I will probably need it sometime in the future as well. I have seen a few other posts on SU that just ask people to post minidump logs, but I feel as if that is too localized. Would someone be able to explain this? Note: If someone knows how to do this, but doesn't want to explain and is still willing to help me, this is the link for the minidump file =p Make sure to click

  Read the article

• What's hogging my CPU?

  - by endolith

  Ubuntu's System Monitor applet shows 100% CPU usage continuously. If I click it, the resources tab shows it at 100% continuously, too. If I go to processes, though, to find out which process is the culprit, there is nothing above 10%. If I run top there is nothing above 10%. I try killing lots of things, but it continues at 100%. How can I find out what's hogging the CPU? This is an unusual situation on a computer I use daily, that normally only hits 100% CPU when I'm doing something that requires it (like loading 32 Firefox tabs) after which it goes back to a normal idle level. It's not a new install or anything. It shouldn't be maxed out. I'm not sure when it started or if I changed something that caused it to happen. Normally I would use top or System Monitor and find the process that had gone out of control, but I can't find anything with those tools this time. It persists after reboots and everything. And the processor is obviously hot, so it's not an erroneous reading. Update: I tried killing any process I saw active again, and killing vino-server finally fixed the problem, even though it never went above 5%. I had enabled Remote Desktop a few days ago (and have obviously now disabled it). How did it manage to use 100% CPU while top only showed it as 5% or so? How do I identify the culprit in the future? Looks like I'm not the only one: Still a problem in both jaunty & karmic. Interestingly, both System Monitor & htop do not show the sum of individual processes being anywhere near 100% cpu.

  Read the article

• Need help with some IIS7 web.config compression settings.

  - by Pure.Krome

  Hi folks, I'm trying to configure my IIS7 compression settings in my web.config file. I'm trying to enable HTTP 1.0 requests to be gzip. MSDN has all the info about it here. Is it possible to have this config info in my own website's web.config file? Or do i need to set it at an application level? Currently, I have that code in my web.config... <system.webServer> <urlCompression doDynamicCompression="true" dynamicCompressionBeforeCache="true" /> <httpCompression cacheControlHeader="max-age=86400" noCompressionForHttp10="False" noCompressionForProxies="False" sendCacheHeaders="true" /> ... other stuff snipped ... </system.webServer> It's not working :( HTTP 1.1 requests are getting compressed, just not 1.0. That MSDN page above says that it can be used in :- Machine.config ApplicationHost.config Root application Web.config Application Web.config Directory Web.config So, can we set these settings on a per-website-basis, programatically in a web.config file? (this is an Application Web.config file...) What have i done wrong? cheers :) EDIT: I was asked how i know HTTP1.0 is not getting compressed. I'm using the Failed Request Tracing Rules, which reports back:- DYNAMIC_COMPRESSION_START DYNAMIC_COMPRESSION_NOT_SUCESS Reason: 3 Reason: NO_COMPRESSION_10 DYNAMIC_COMPRESSION_END

  Read the article

< Previous Page | 759 760 761 762 763 764 765 766 767 768 769 770  | Next Page >