Search Results

Search found 46413 results on 1857 pages for 'system speech recognition'.

Page 763/1857 | < Previous Page | 759 760 761 762 763 764 765 766 767 768 769 770  | Next Page >

• [Ubuntu 10.04] mdadm - Can't get RAID5 Array To Start

  - by Matthew Hodgkins

  Hello, after a power failure my RAID array refuses to start. When I boot I have to sudo mdadm --assemble --force /dev/md0 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 /dev/sdf1 /dev/sdg1 to get mdadm to notice the array. Here are the details (after I force assemble). sudo mdadm --misc --detail /dev/md0: /dev/md0: Version : 00.90 Creation Time : Sun Apr 25 01:39:25 2010 Raid Level : raid5 Used Dev Size : 1465135872 (1397.26 GiB 1500.30 GB) Raid Devices : 6 Total Devices : 6 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Jun 17 23:02:38 2010 State : active, Not Started Active Devices : 6 Working Devices : 6 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 128K UUID : 44a8f730:b9bea6ea:3a28392c:12b22235 (local to host hodge-fs) Events : 0.1249691 Number Major Minor RaidDevice State 0 8 65 0 active sync /dev/sde1 1 8 81 1 active sync /dev/sdf1 2 8 97 2 active sync /dev/sdg1 3 8 49 3 active sync /dev/sdd1 4 8 33 4 active sync /dev/sdc1 5 8 17 5 active sync /dev/sdb1 mdadm.conf: # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions /dev/sdb1 /dev/sdb1 # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # definitions of existing MD arrays ARRAY /dev/md0 level=raid5 num-devices=6 UUID=44a8f730:b9bea6ea:3a28392c:12b22235 Any help would be appreciated.

  Read the article

• Backup and Archive Strategy Question

  - by OneNerd

  I am having trouble finding a backup strategy for our code assets that 'just works' without any manual intervention. Goal is to have an off-site backup (a synchronized one) so that when we check-in files, create builds, etc. to the network drive, the entire folder structure is automatically synchronized and backed-up (in real time, or 1x per day) at some off-site location so if our office blows up, we don't lose all of our data. I have looked into some online backup services, but have not yet had any success. Some are quirky/buggy, others limit file size and/or kinds of files (which doesn't work well for developer files). Everything gets checked in and saved to a single server (on a Raid Mirror), so we just need to have a folder on that server backed up/synchronized to some off-site location. So my question is this. What are you using for your off-site backup strategy. What software, system, or service? Is there a be-all/end-all system of backing up your code assets that I just haven't found yet? Thanks

  Read the article

• IIS 7.0 404 Custom Error Page and web.config

  - by Colin

  I am having trouble with a custom 404 error page. I have a domain running a .NET proj with it's own error handling. I have a web.config running for the domain which contains: <customErrors mode="RemoteOnly"> <error statusCode="500" redirect="/Error"/> <error statusCode="404" redirect="/404"/> </customErrors> On a sub dir of that domain I am ignoring all routes there by doing routes.IgnoreRoute("Assets/{*pathInfo}"); in the .NET proj and I want to put a custom 404 error page on that and any sub dir's of Assets. The sub dir contains static content like images, css, js etc etc. So in the Error Pages section of IIS I put a redirect to an absolute URL. The web.config for that dir looks like the following: <system.webServer> <httpErrors> <remove statusCode="404" subStatusCode="-1" /> <error statusCode="404" prefixLanguageFilePath="" path="http://mydomain.com/404" responseMode="Redirect" /> </httpErrors> </system.webServer> But I navigate to an unknown URL under that dir and yet I still see the default IIS 404 page. I am also seeing an alert in IIS that reads: You have configured detailed error messages to be returned for both local and remote requests. When this option is selected, custom error configuration is not used. Does this have anything to do with the customErrors mode="RemoteOnly" in the site web.config? I have tried to overwrite the customErrors in the sub dir web.config but nothing changes. Any help would be appreciated. Thanks.

  Read the article

• Does Windows 7 Authenticate Cached Credentials on Startup

  - by Farray

  Problem I have a Windows domain user account that gets automatically locked-out semi-regularly. Troubleshooting Thus Far The only rule on the domain that should automatically lock an account is too many failed login attempts. I do not think anyone nefarious is trying to access my account. The problem started occurring after changing my password so I think it's a stored credential problem. Further to that, in the Event Viewer's System log I found Warnings from Security-Kerberos that says: The password stored in Credential Manager is invalid. This might be caused by the user changing the password from this computer or a different computer. To resolve this error, open Credential Manager in Control Panel, and reenter the password for the credential mydomain\myuser. I checked the Credential Manager and all it has are a few TERMSRV/servername credentials stored by Remote Desktop. I know which stored credential was incorrect, but it was stored for Remote Desktop access to a specific machine and was not being used (at least not by me) at the time of the warnings. The Security-Kerberos warning appears when the system was starting up (after a Windows Update reboot) and also appeared earlier this morning when nobody was logged into the machine. Clarification after SnOrfus answer: There was 1 set of invalid credentials that was stored for a terminal server. The rest of the credentials are known to be valid (used often & recently without issues). I logged on to the domain this morning without issue. I then ran windows update which rebooted the computer. After the restart, I couldn't log in (due to account being locked out). After unlocking & logging on to the domain, I checked Event Viewer which showed a problem with credentials after restarting. Since the only stored credentials (according to Credential Manager) are for terminal servers, why would there be a Credential problem on restart when remote desktop was not being used? Question Does anyone know if Windows 7 "randomly" checks the authentication of cached credentials?

  Read the article

• What does a status of "Backup" mean for Windows 7 local user profiles?

  - by Howiecamp

  Summary: Upon logging on to Windows 7 RTM I get a message that my profile can't be loaded and a temporary user profile is created. I logged off and back on as Administrator. The user profiles dialog shows my user profile with a Type of "Local" and a Status of "Backup" rather than "Local" which it should be. How can I change this to make my user profile accessible? The long story: My PC has a single hard drive partitioned into a C: and a D:. I'd moved my user profile directory (c:\Users) to d:\Users, removed c:\Users and then used mklink.exe to create a directory symbolic link c:\Users -- d:\Users. Worked like a charm since I did it. Today, I make a System Restore Point for drives C: and D:. Next, I dismounted D: and used the Disk Management tool to remove the "D:" drive letter from the D volume. (My plan was to reboot and then redirect the symbolic link.) Upon reboot, I got the user profile error described above. Finally, I restored the System Restore Points that I'd created for both drives and then rebooted again. Same issue.

  Read the article

• What Counts For A DBA: Foresight

  - by drsql

  Of all the valuable attributes of a DBA covered so far in this series, ranging from passion to humility to practicality, perhaps one of the most important attributes may turn out to be the most seemingly-nebulous: foresight. According to Free Dictionary foresight is the "perception of the significance and nature of events before they have occurred". Foresight does not come naturally to most people, as the parent of any teenager will attest. No matter how clearly you see their problems coming they won't listen, and have to fail before eventually (hopefully) learning for themselves. Having graduated from the school of hard knocks, the DBA, the naive teenager no longer, acquires the ability to foretell how events will unfold in response to certain actions or attitudes with the unerring accuracy of a doom-laden prophet. Like Simba in the Lion King, after a few blows to the head, we foretell that a sore head that will be the inevitable consequence of a swing of Rafiki's stick, and we take evasive action. However, foresight is about more than simply learning when to duck. It's about taking the time to understand and prevent the habits that caused the stick to swing in the first place. And based on this definition, I often think there is a lot less foresight on display in my industry than there ought to be. Most DBAs reading this blog will spot a line such as the following in a piece of "working" code, understand immediately why it is less than optimimum, and take evasive action. …WHERE CAST (columnName as int) = 1 However, the programmers who regularly write this sort of code clearly lack that foresight, and this and numerous other examples of similarly-malodorous code prevail throughout our industry (and provide premium-grade fertilizer for the healthy growth of many a consultant's bank account). Sometimes, perhaps harried by impatient managers and painfully tight deadlines, everyone makes mistakes. Yes, I too occasionally write code that "works", but basically stinks. When the problems manifest, it is sometimes accompanied by a sense of grim recognition that somewhere in me existed the foresight to know that that approach would lead to this problem. However, in the headlong rush, warning signs got overlooked, lessons learned previously, which could supply the foresight to the current project, were lost and not applied.   Of course, the problem often is a simple lack of skills, training and knowledge in the relevant technology and/or business space; programmers and DBAs forced to do their best in the face of inadequate training, or to apply their skills in areas where they lack experience. However, often the problem goes deeper than this; I detect in some DBAs and programmers a certain laziness of attitude.   They veer from one project to the next, going with "whatever works", unwilling or unable to take the time to understand where their actions are leading them. Of course, the whole "Agile" mindset is often interpreted to favor flexibility and rapid production over aiming to get things right the first time. The faster you try to travel in the dark, frequently changing direction, the more important it is to have someone who has the foresight to know at least roughly where you are heading. This is doubly true for the data tier which, no matter how you try to deny it, simply cannot be "redone" every month as you learn aspects of the world you are trying to model that, with a little bit of foresight, you would have seen coming.   Sometimes, when as a DBA you can glance briefly at 200 lines of working SQL code and know instinctively why it will cause problems, foresight can feel like magic, but it isn't; it's more like muscle memory. It is acquired as the consequence of good experience, useful communication with those around you, and a willingness to learn continually, through continued education as well as from failure. Foresight can be deployed only by finding time to understand how the lessons learned from other DBAs, and other projects, can help steer the current project in the right direction.   C.S. Lewis once said "The future is something which everyone reaches at the rate of sixty minutes an hour, whatever he does, whoever he is." It cannot be avoided; the quality of what you build now is going to affect you, and others, at some point in the future. Take the time to acquire foresight; it is a love letter to your future self, to say you cared.

  Read the article

• Domain joined computer unable to access servers through VPN

  - by kscott

  Our servers are in a virtual off site hosting center, our office has a vpn connection to the data center, but for reasons I don't understand we also have to connect to the Citrix Access Gateway (CAG) client in order to access the servers. I am a programmer with rather limited ops knowledge including a weak grasp of networking and terminology. Bear with me. I was just given a new laptop, which is a 64 bit Windows 7 system unlike my previous 32 bit Windows XP desktop which was able to connect without issue. My laptop has been joined to the domain so that I login with my AD credentials, I am able to connect to the CAG and get authenticated, and after doing this I can ping our servers and they resolve to the correct internal IP addresses, but I am unable to use remote desktop to the servers, connect to SQL servers through my local SQL Management Studio, navigate to them through the file system, or view any of our internal intranet websites. All of which I was able to do previously. I have tried turning off my Windows firewall and the problem remains, the DNS servers are set to the correct IPs of our domain controllers, and the ops guys here are a little stumped. Does any one have any suggestions?

  Read the article

• Debugging a Drobo that chokes Windows 7x64 When Plugged In

  - by Pridkett

  I've had a love hate relationship with my Drobo for a long time. After two years of using it on a Linux box, I moved it over to a Windows 7 machine where it seemed to work just fine for a long time, but it was under very light usage. Mainly backups that never actually happened. Recently I began using it for additional backup services (through CrashPlan, which is great). This means the Drobo gets a lot more usage. Also it means that something interesting happens, the Drobo can choke my system on startup. Here's what I mean: Start computer without Drobo plugged in, CrashPlan and Drobo Dashboard services disabled: 105s Start computer with Drobo plugged in Crashplan disabled, Drobo Dashboard enabled: 250s (and 1 cpu at 100% for a very long time, drobo churning) Start computer with Drobo plugged in, CrashPlan and Drobo Dashboard disabled: 250s (1 cpu at 100% for a very long time, drobo churning) Start computer with Drobo plugged in, Crashplan and Drobo Dashboard enabled: 300s (1 cpu at 100% for a very long time, drobo churning) If I yank the USB plug on the Drobo the CPU usage goes down to nothing very quickly. The slow startup in the fourth scenario is because CrashPlan is trying desperately to load stuff up on the H: drive before it gives up, so I've disabled it for the time being. So here's my question: What the heck is going on when I plug the drobo in? I've fired up Process Explorer and see that the System process is hogging the CPU, specifically it's an ntoskrnl.exe/KdPollBreakIn thread that's going ape. Is this something that's wrong with Drobo? Windows? Any idea on how to find out? If it matters, here's tech info: Athlon 64x2 4400, 2GB RAM, Win7 Ultimate, Drobo USB (2x1TB, 2x320GB)

  Read the article

• Mac OSX: which folders should ClamXav Sentry watch?

  - by trolle3000

  I'm using ClamXav on my mac. I've read this, and I am aware of the whole macs-need-no-AV-but-they-do-anyway discussion. I guess that's why I would feel like a real ass if I somehow managed to compromise my system! So ClamXav has been downloaded and ClamXav Sentry set up to start on log-in, but it doesn't really do anything before you tell it to. Specifically, you have to tell it which folders to watch for virusses/vira so I'm wondering, where are good places to look? Currently it's been set up to look the following places: In the home folder: ~/Downloads ~/Library/Caches ~/Library/Contextual Menu Items ~/Library/Cookies ~/Library/Internet Plug-Ins ~/Library/LaunchAgents In my system folder: /Library/Application Support /Library/Caches /Library/Contextual Menu Items /Library/Cookies /Library/Internet Plug-Ins /Library/LaunchAgents /Library/LaunchDaemons /Library/Startupitems Basically, this is 100% conjecture. All (most of) the folders have something to do with internet and things that start up automatically, so I'm guessing that's where vira go. But still, the qustion: Which folders should ClamXav Sentry watch, if any? FYI, I'm not using any mail app's, but please include that in your answer for anyone who might be interested. Cheers!

  Read the article

• Cannot perform a PECL installation

  - by Petrusa

  I have been trying to do a few PECL installations, but all of them return the same type of error. Something related to timezones? Im running RedHat x86_64 es5. Attempting to install geoip-1.0.7: root@server [~]# pecl install geoip-1.0.7 downloading geoip-1.0.7.tgz ... Starting to download geoip-1.0.7.tgz (9,416 bytes) .....done: 9,416 bytes Warning: strtotime(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CST/-6.0/no DST' instead in PEAR/Validate.php on line 489 Warning: strtotime(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CST/-6.0/no DST' instead in /usr/local/lib/php/PEAR/Validate.php on line 489 3 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 building in /var/tmp/pear-build-root/geoip-1.0.7 running: /root/tmp/pear/geoip/configure checking for egrep... grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... configure: error: cannot run C compiled programs. If you meant to cross compile, use `--host'. See `config.log' for more details. ERROR: `/root/tmp/pear/geoip/configure' failed What is going on? Anyone that could assist please...

  Read the article

• Disable XP disk check using FAT32

  - by mike xie

  Right now I'm using Windows XP and Macintosh on my MacBook Pro via Bootcamp. Sometimes my XP would crash and when I restarted it it would have to go through disk check, although it says I can skip it by pushing a key, but this never worked for me. I did a bit of research online on how to disable disk check and found chkntfs /x c: but when I tried this out in my cmd it said the disk is FAT32 format. I tried to convert my C: drive from FAT32 to NTFS by using convert c: /FS:NTFS but when I tried this it told me to locate my C: drive. I tried to type C: and Bootcamp but couldn't really get past it. I later saw someone said to use this: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager] "AutoChkTimeOut"=dword:0000000 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager] "BootExecute"=hex(7):61,00,75,00,74,00,6f,00,63,00,68,00,65,00,63,00,6b,00,20,\ 00,61,00,75,00,74,00,6f,00,63,00,68,00,6b,00,20,00,2a,00,00,00,00,00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] "SFCScan"=dword:00000000 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\cleanuppath] @=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\ 00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,63,00,6c,00,\ 65,00,61,00,6e,00,6d,00,67,00,72,00,2e,00,65,00,78,00,65,00,20,00,2f,00,44,\ 00,20,00,25,00,63,00,00,00 (Save it as .reg and execute it) I have just tried running it but am not really sure if it did anything (my laptop hasn't crashed yet :) ) Firstly, I am wondering if someone can tell me how to check if that script worked? Secondly, if that script didn't work, does anyone have any solution for these problems? Is there another way to disable disk check or is there another way for me to change my FAT32 to NTFS?

  Read the article

• CentOS 6.3 X86_64 RAM detection

  - by Peter

  I have a machine with 8GB ram (BIOS sees it, so my motherboard and CPU supports it), and I installed CentOS 6.3 on it. When it starts up, it only see 3.1GB. uname says: 2.6.32-279.1.1.el6.x86_64 #1 SMP BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cf65f000 (usable) BIOS-e820: 00000000cf65f000 - 00000000cf6e8000 (ACPI NVS) BIOS-e820: 00000000cf6e8000 - 00000000cf6ec000 (usable) BIOS-e820: 00000000cf6ec000 - 00000000cf6ff000 (ACPI data) BIOS-e820: 00000000cf6ff000 - 00000000cf700000 (usable) dmesg | grep -i memory says: initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cf700000 Reserving 129MB of memory at 48MB for crashkernel (System RAM: 3319MB) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000cf65f000 - 00000000cf6e8000 PM: Registered nosave memory: 00000000cf6ec000 - 00000000cf6ff000 Memory: 3184828k/3398656k available (5152k kernel code, 1016k absent, 212812k reserved, 7166k data, 1260k init) please try 'cgroup_disable=memory' option if you don't want memory cgroups Initializing cgroup subsys memory Freeing initrd memory: 16136k freed Non-volatile memory driver v1.3 agpgart-intel 0000:00:00.0: detected 8192K stolen memory crash memory driver: version 1.1 Freeing unused kernel memory: 1260k freed Freeing unused kernel memory: 972k freed Freeing unused kernel memory: 1732k freed Update: Memtest see all the 8GB, and dmidecode -t 17 | grep Size too. But free -m still see only 3.1 GB. Question: How can I repair/modify the system, to see all the 8GB RAM? Thanks in advance!

  Read the article

• How do I configure a new (non-OS) raid device under Windows 7?

  - by GregH

  I recently installed 3 new 1TB drives in my Windows 7 (64 bit) system. These are in addition to the 10k rpm disk that I already have running the Windows 7 OS. My intent is to create a RAID 5 volume with the 3 disks. I don't seem to have a problem configuring the bios and creating the resulting 1.9 TB RAID volume. I run in to the problem when I try booting in to Windows. I get a quick flash of a blue screen and then am prompted by windows to do a repair. It tries to repair and then reboots. This sequence lasts indefinitely. If I re-configure the bios back to non-RAID (ACHI) then windows boots fine. The strange thing is that the 1.9 TB volume I configured through the bios actually shows up in windows! Strange since the motherboard is not set up with RAID. I assume that I somehow have to install the RAID drivers from the mobo manufacturer. How do I do this? Is the reason I'm getting the blue screen a result of not having the RAID drivers installed? It's strange because I can find plenty of documentation on how to set up RAID and do a fresh install Windows on to the RAID device, but nothing on how to set up a RAID device on an already running system. Advice is appreciated.

  Read the article

• Tracking Security Vulnerability remediation

  - by Zypher

  I've been looking into this for a little while, but havn't really found anything suitable. What I am looking for is a system to track security vulnerability remdiation status. Something like "bugzilla for IT" What I am looking for is something pretty simple that allows the following: batch entry of new vulnerabilities that need to be remediated Per user assignment AD/LDAP Authentiation Simple interface to track progress - research, change control status, remediated, etc. Historical search ability Ability to divide by division Ability to store proof of resolution for the Security Team to access Dependency tracking Linux based is best (that's my group :) ) Free is good, but cost doesn't matter so much if the system is worth it The systems doesn't have to have all of these features, but if it did that would be great. yes we could use our helpdesk software, but that has a bunch of pitfalls such as triggering SLA alerts and penalties as well as not easily searchable outside of a group. Most of what I have found are bug tracking systems that are geared towards developers, and are honstely way overkill for what I am looking for. Server Faults input is greatly appreciated as always!

  Read the article

• Re-sizing disk partition linux/vm

  - by Tiffany Walker

  I VM Player running a linux guest and I was wanting to know how do I expand the disk? In the VM player I gave more disk space but I am not sure how to mount/expand/connect the new disk space to the system. My old disk space was 14GB [root@localhost ~]# df -h / Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root 14G 4.5G 8.2G 36% / Then I expanded it and now I see sda2 which is the new space? [root@localhost ~]# fdisk -l Disk /dev/sda: 128.8 GB, 128849018880 bytes 255 heads, 63 sectors/track, 15665 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000cd44d Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 2611 20458496 8e Linux LVM Disk /dev/mapper/VolGroup-lv_root: 14.5 GB, 14537457664 bytes 255 heads, 63 sectors/track, 1767 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/VolGroup-lv_swap: 6408 MB, 6408896512 bytes 255 heads, 63 sectors/track, 779 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Do I need to mount the new space first? resize2fs -p /dev/mapper/VolGroup-lv_root 108849018880 resize2fs 1.41.12 (17-May-2010) The containing partition (or device) is only 3549184 (4k) blocks. You requested a new size of 1474836480 blocks. resize2fs -p /dev/mapper/VolGroup-lv_root 128849018880 resize2fs 1.41.12 (17-May-2010) resize2fs: Invalid new size: 128849018880 [root@localhost ~]# lvextend -L+90GB /dev/mapper/VolGroup-lv_root Extending logical volume lv_root to 103.54 GiB Insufficient free space: 23040 extents needed, but only 0 available [root@localhost ~]# lvextend -L90GB /dev/mapper/VolGroup-lv_root Extending logical volume lv_root to 90.00 GiB Insufficient free space: 19574 extents needed, but only 0 available EDIT: So after trying pvcreate/vgextend nothing has so far worked. I'm guessing the new disk space added from VM Player is not showing up? pvscan PV /dev/sda2 VG VolGroup lvm2 [19.51 GiB / 0 free] Total: 1 [19.51 GiB] / in use: 1 [19.51 GiB] / in no VG: 0 [0 ]

  Read the article

• Monitoring outgoing messages using EXIM

  - by dashmug

  I work as an IT guy in a law firm. I am recently asked to make a system wherein all the outgoing emails coming from our server to our clients will be put on hold first and wait for approval before it gets sent to the client. Our mail server uses Exim (that's what it says in cPanel). I am planning to create filters where the outgoing emails will be forwarded to an editor account. Then, the editor will review and edit the contents of the email. When the editor already approves the email, it will then get sent to the client by the editor but still using the original sender in the "From:" and "Reply-To:" field. I found some pointers from this site = http://www.devco.net/archives/2006/03/24/saving_copies_of_all_email_using_exim.php. Once the filters are in place, I want to make a simple PHP interface for the editor to check the forwarded emails and edit them if necessary. The editor can then click on an "Approve" button that will finally deliver the message using the original sender. I'm also thinking that maybe a PHP-less system will be enough. The editor can receive the emails from his own email client edit them and simply send the email as if he is the original sender. Is my plan feasible? Will there be issues that I have overlooked? Does it have the danger of being treated as spam by the other mailservers since I'll be messing up the headers?

  Read the article

• How to restrict postfix send limited email with policyd v2?

  - by Shalini Tripathi

  I have installed cluebringer-2.0.7 for postfix and enabled below lines in the main.cf file of postfix. But I could not see any policy working smtpd_recipient_restrictions = permit_mynetworks permit_sasl_authenticated reject_unauth_destination check_policy_service inet:127.0.0.1:10031 smtpd_end_of_data_restrictions=check_policy_service inet:127.0.0.1:10031 To check further I enabled logging in policyd and its only shows below logs and there is no logs getting populated when I send new emails.. [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: Process Backgrounded [2012/06/12-21:18:50 - 13949] [CBPOLICYD] NOTICE: Policyd v2 / Cluebringer - v2.0.7 [2012/06/12-21:18:50 - 13949] [CBPOLICYD] NOTICE: Initializing system modules. [2012/06/12-21:18:50 - 13949] [CBPOLICYD] NOTICE: System modules initialized. [2012/06/12-21:18:50 - 13949] [CBPOLICYD] NOTICE: Module load started... [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: = AccessControl: enabled [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: = CheckHelo: enabled [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: = CheckSPF: enabled [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: = Greylisting: enabled [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: = Quotas: enabled [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: = Protocol(Postfix): enabled [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: = Protocol(Bizanga): enabled [2012/06/12-21:18:50 - 13949] [CBPOLICYD] NOTICE: Module load done. [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: 2012/06/12-21:18:50 cbp (type Net::Server::PreFork) starting! pid(13949) [2012/06/12-21:18:50 - 13949] [CORE] NOTICE: Binding to TCP port 10031 on host * [2012/06/12-21:18:50 - 13949] [CORE] WARNING: Group Not Defined. Defaulting to EGID '0 10 6 4 3 2 1 0' [2012/06/12-21:18:50 - 13949] [CORE] WARNING: User Not Defined. Defaulting to EUID '0' Do I need to do anymore settings for postfix to listen on policyd???Please help

  Read the article

• How seriously should I take ECC correctable error warnings?

  - by David Mackintosh

  I have a pile of Sun X2200-M2 servers. These servers have ECC memory. In some of these servers, I am getting warnings in the eLOM about "correctable ECC errors detected", eg: # ssh regress11 ipmitool sel elist 1 | 05/20/2010 | 14:20:27 | Memory CPU0 DIMM2 | Correctable ECC | Asserted 2 | 05/20/2010 | 14:33:47 | Memory CPU0 DIMM2 | Correctable ECC | Asserted ...some more frequently than others. The kernel on this particular system is throwing EDAC errors as well, although with far more frequency than the eLOM is recording ECC events: EDAC k8 MC0: general bus error: participating processor(local node response), time-out(no timeout) memory transaction type(generic read), mem or i/o(mem access), cache level(generic) MC0: CE page 0x42a194, offset 0x60, grain 8, syndrome 0xf654, row 4, channel 1, label "": k8_edac MC0: CE - no information available: k8_edac Error Overflow set EDAC k8 MC0: extended error code: ECC chipkill x4 error EDAC k8 MC0: general bus error: participating processor(local node response), time-out(no timeout) memory transaction type(generic read), mem or i/o(mem access), cache level(generic) MC0: CE page 0x48cb94, offset 0x10, grain 8, syndrome 0xf654, row 5, channel 1, label "": k8_edac MC0: CE - no information available: k8_edac Error Overflow set EDAC k8 MC0: extended error code: ECC chipkill x4 error Now if the server is detecting Uncorrectable ECC, the system resets, so clearly that's bad and removing/replacing the identified stick or pair corrects the issue. But I am thinking that if the error is Correctable, then there's no immediate issue -- I can treat this as a warning and be prepared to pull the stick/pair if an uncorrectable error starts occurring?

  Read the article

• Hard drives (SATA/ATA) corrupting

  - by JC Denton

  Hello All, 2 years ago I bought relatives a new computer for christmas and installed Ubuntu on it. Ever since then it has been experiencing problems with the hard drives. The hard drive supplied with the machine was a SATA drive. When it appeared it was having problems (files and folders with invalid encoding started appearing) I replaced the SATA drive with the drive of their previous computer. I replaced it (The replacement) later on, the drive being rather old and thus becoming more prone to the risk of failure. The replacement drive is a IDE drive but the same problems started to appear (files and folders showing up in nautilus with invalid encoding). I fear the files and folders that are showing are existing FS entries, starting to corrupt. As it's happening to both the IDE and SATA drive it's unlikely to be the drives themselves or the IDE/SATA controller, I believe. Any ideas as to what could be causing the (assumed) corruption? EDIT: You're right about the paragraphs. They were there in edit mode but I'm still getting to grips with the whitespace format codes. The system is a "Primo Pro" AMD Phenom II X4 Quad Core 920 2.80GHz SILENT DDR2, ordered from overclockers.co.uk and nothing has been added to it except for the replacement of the SATA drive with an AMD drive. It would seem unlikely for a barebones system to be underpowered.

  Read the article

• What permission(s) does an application pool identity required to manage other application pools?

  - by Mr Shoubs

  I have a web site (used to manage various parts of our software) that needs the permissions required to start/stop other application pools. I've created a user and set the app pool identity to custom, however the web app still can't start/stop the app pools. I get the following Error: System.UnauthorizedAccessException: Filename: redirection.config Error: Cannot read configuration file due to insufficient permissions at Microsoft.Web.Administration.Interop.AppHostWritableAdminManager.GetAdminSection(String bstrSectionName, String bstrSectionPath) at Microsoft.Web.Administration.Configuration.GetSectionInternal(ConfigurationSection section, String sectionPath, String locationPath) at Microsoft.Web.Administration.ServerManager.get_ApplicationPoolsSection() at Microsoft.Web.Administration.ServerManager.get_ApplicationPools() Discussion here suggests setting the application pool to local system or administrator, this does work, but I don't want to do this for security reasons (external support will need access this site). I did give the user higher permissions (as suggested here), starting by making it part of the local administrators group, but initially this didn't work, and giving the user read/write/mod permission on C:\Windows\System32\inetsrv\config also didn't work. I must have done something wrong as local administrator now works, however this still isn't what I want. So can anyone suggest the permissions I need to add to this user, and how can I apply them? An answer my problem (but different question) is here, but to clarify, I think I need to give an individual user "IIS Runtime Operation Permissions", does anyone know how to do this, if indeed this is the permissions I require?

  Read the article

• Mac: window manager frozen, have ssh access

  - by Bernd

  I have a Mac which regularly runs into a problem. The user interface stops reponding, showing a "frozen" user interface. The mouse is still moving but clicking does not trigger anything. This happens about once a week. Solution so far is to force switch-off the Mac and reboot it. I have ssh root access to the Mac. Killing (kill -9) the active application has no visible impact on what is shown on the screen. Any ideas on how to diagnose this? Is there a way to restart the window manager from the ssh shell? Killing /System/Library/Frameworks/ApplicationServices.framework/Frameworks/CoreGraphics.framework/Resources/WindowServer seems not to be possible. The Mac is an early 2008 iMac and runs Lion with latest updates. /Library/Logs/DiagnosticReports is empty. Update: Problem stays after update to Mountain Lion. The WindowServer process is in "uninterruptible wait" state ("U" flag in ps output set): imac:~ root# ps ax|awk "NR==1|| /WindowServer/"|grep -v awk PID TT STAT TIME COMMAND 86 ?? Us 50:51.69 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/CoreGraphics.framework/Resources/WindowServer -daemon Any idea for diagnosing what blocks the process? Any idea for "waking up" the process?

  Read the article

• Software Diagnostics Tool recommendations for Debugging a Windows 8 freeze

  - by Stuart

  I've had my HP Pavillion dv6 laptop since last November - and it has had 8GB RAM and a 256GB Crucial M4 SSD installed since the start. I use it for software development and it's had a Windows 8 RTM installation since early September. Yesterday I had to give a presentation at a customer site - so used Powerpoint for the first time since installing Win8... since that point my machine has 'frozen' every 2 hours or so after startup. There doesn't seem to be any easy to see reason behind the freeze - the system just freezes, even if I have left it idle with just a desktop there. My immediate suspicion is that the SSD is the mostly likely cause of the problem. I've looked at some of the questions on here - e.g. How do I troubleshoot hardware issues related to a computer freeze/crash? - but don't really want to start taking my laptop apart. Another suspicion is that this might be related to the WiFi adapter (Broadcom 802.11n) since I have noticed that this doesn't seem to play perfectly with things like Hyper-V in Win8. Can anyone recommend any software diagnostic tools that I can run in order to evaluate the health of the SSD or of other parts of the system? Thanks Stuart P.S. I doubt Powerpoint is the cause of this, but I may use it as an excuse never to use it again... More realistically perhaps something got damaged during travel to the customer site?

  Read the article

• how to initialize two logical drives on a HP P400i controller without reboot

  - by John

  What I am trying to do is initialize two logical drives on a HP P400i embedded controller without a reboot of the system here my current Array config: array A (SAS, Unused Space: 0 MB) logicaldrive 1 (17.9 GB, RAID 5, OK) logicaldrive 2 (17.9 GB, RAID 5, OK) logicaldrive 3 (75.9 GB, RAID 5, OK) logicaldrive 4 (25.0 GB, RAID 5, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 72 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 72 GB, OK) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 72 GB, OK) array B (SAS, Unused Space: 0 MB) logicaldrive 5 (99 MB, RAID 0, OK) logicaldrive 6 (68.2 GB, RAID 0, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 72 GB, OK) windows 2003 machine running the HpCISs2.sys driver version 6.20.0.32 . I have the ACU and ACU CLI tools installed version 8.28.13.0, P400i firmware version 2.74 . Now what I'd like to do is removes the physical drive 1I:1:4 and delete the two logical drives in array B. then insert a new drive in to bay 4 that contains two new logical drives and have them show up in array B again. So far after I remove the drive and delete the failed logical drives, I insert the new drive and run HPacucli rescan. I get the new drive to show up as unassinged physical drive but I cant figure out now to "for lack of a better word" mount the 2 logical drives on the new unassinged disk. If I reboot the system the array controller picks up the new fourth drive and creates Array B with the drives without problem but I'd really like to not have to reboot the server. Any ideas?

  Read the article

• Sniffing at work- How to detect

  - by coffeeaddict

  Because of the place I work has some real issues (people) especially in IT and the owner, I wonder if we are being sniffed. Is there any way to tell if on a Vista 64-bit machine: 1) In system logs some identification that would tell me that someone might log into my PC such as an Admin 2) Something in the logs that would give me a flag about maybe I'm being monitored some other way? 3) How can I be sure that my gmail, hotmail, and chat is not being sniffed. I know there are things like Simp, etc. I'm talking about specific hidden system signs either in registry or logs. Obviously I'm not going to raise any suspicion by me asking our network admin. I don't trust anyone at this company. is there a good way to basically monitor for this as an end user? Could someone log in and basically watch me work and if so, would there be any goodies left behind for me to find out if this has happened other than visual signs which would not be present...maybe some running processes?

  Read the article

• IIS 6 + ASP.NET web service - DW20 and stackoverflow exception

  - by pcampbell

  Consider an ASP.NET SOAP web service that starts up fine, but craters hard when receiving its first hit. Please note that this is deployment works in the Test environment, but not in the PreProd environment. Both are Windows 2003 SP3 + IIS 6 + ASP.NET 3.5. All up-to-date. The behaviour that we're seeing is: restart the site & app pool the app pool is configured to run under Network Service. browsing to the .asmx and .wsdl responds normally, as expected. send a normal well-formed SOAP request / normal payload to the web service 100% CPU usage after 5 seconds, the page request / site returns "Service Unavailable" no entry is created in the IIS log file (i.e. c:\windows\system32\logfiles\W3C-foo) the app pool ends up being stopped The processes that hit the CPU hard are dw20.exe. I am unsure why Dr Watson is involved here. Event Log shows an ASP.NET Runtime error: Task Manager: Event log text: EventType clr20r3, P1 w3wp.exe, P2 6.0.3790.3959, P3 45d6968e, P4 errormanagement, P5 1.0.0.0, P6 4b86a13f, P7 24, P8 0, P9 system.stackoverflowexception, P10 NIL. Questions Any thoughts on what this system.stackoverflow exception might be? Given that the code is the same between environments, might it be a payload problem? Could it be a configuration issue? You can see the name of my .NET assembly there in the exception message: "ErrorManagement"

  Read the article

< Previous Page | 759 760 761 762 763 764 765 766 767 768 769 770  | Next Page >