Search Results

Search found 21142 results on 846 pages for 'bit manipulation'.

Page 765/846 | < Previous Page | 761 762 763 764 765 766 767 768 769 770 771 772  | Next Page >

• What are the most likely bottlenecks determining the performance of CamStudio screen recording?

  - by Steve314

  When doing screen recording, I can get a frame rate of maybe 15 frames per second for the full screen on my 1080p monitor using the XVID codec. I can increase the speed a bit by recording a region, changing screen modes, and tweaking other settings, but I'm curious what hardware upgrades might give me the biggest bang for my buck. My PC is budget, but modern... Athlon 2 X4 645 (3.1GHz, quad core, limited cache) processor. 4GB single channel DDR3 1066 RAM. ASRock motherboard with NVidia GeForce 7025/nForce 630a Chipset. ATI Radeon HD 5450 graphics card - 512MB on board, not configured to steal system RAM. I dual-boot Windows XP and Windows 7. For the moment, XP is my bigger performance concern as it's still my getting-things-done O/S as opposed to my browser-host O/S. My goal is to make a few programming-related tutorials. For a lot of that I don't need screen recording - I can make up some slides, record audio with the PC switched off, yada yada. When I do need screen recording, I'll mostly be recording Notepad++, Visual Studio or a command prompt. Occasionally, I may be recording some kind of graphics or diagram program and using my pre-Bamboo cheap Wacom tablet - I have the CS2 versions of Photoshop and Illustrator, but I'd much more likely be using Microsoft Paint. Basically, what I'll be recording won't be making huge demands on the machine - but recording a fair number of pixels (720p preferred) will be useful. What's particularly wierd - not so long ago I still had a five-year-old Pentium 4 based PC. And (with the same 1080p monitor) it could record at not far from the same frame rate. So clearly the performance issues are more subtle than just throw-money-at-it. My first guess would be that the main bottleneck is the bandwidth for transferring data to/from the graphics card. Is that likely to be correct? In support of that, see this [Radeon HD 5450 review][1] - the memory bandwidth is only 12.8 GB/s. If you can't get data out of graphics memory quickly, you can't transfer it back to the system memory quickly. Apparently, that's slower than some top-end cards in 2002.

  Read the article

• Problems with MGCP proxy creation

  - by Popof

  Hi, I'm trying to bypass my ISP router with my FreeBSD server (I've an optical connection so I've a RJ45 used to connect the box to WAN) Internet and TV are working fine (Using igmpproxy to forward TV stream) but I've a problem with phone. ISP's box is connected to the server which gives it a LAN address. The problem is that when the box builds MGCP packets (and especially SDP ones) it uses its LAN address. So I've think of writing an UDP proxy to handle MGCP and SDP packets in order to replace LAN address with server WAN address and then forward packet to WAN. Before starting coding I've captured stream packets using my server as a bridge between WAN connection and the ISP's box. And, in order to see if my solution is viable, I've tried to send those packets to the box using nemesis. I tried to send a packet (found in capture) containing an endpoint audit: AUEP 1447 aaln/[email protected] MGCP 1.0 F: A In the wireshark capture the box replied: 200 1447 OK A: a:PCMU;PCMA;G726-16;G726-24;G726-32;G726-40;G.723.1-5.3;G.723.1-6.3;G729;TELEPHONE-EVENT, fmtp:"TELEPHONE-EVENT 0-15,144,149,159", p:10-30, b:4-40, e:on, t:00, s:on, v:L;M;G;D, m:sendonly;recvonly;sendrecv;inactive;confrnce;replcate;netwtest;netwloop, dq-gi But when I use nemesis, I got an ICMP error: Port unreachable (Type 3, Code 3). To build this packet, WAN source address of the capture is replaced with my server LAN address, using the mgcp-callagent port (2727) and the packet is sent to the LAN address of the box at mgcp-gateway port (2427). The command I use is nemesis udp -S 192.168.2.1 -D 192.168.2.2 -x 2727 -y 2427 -P packet_to_send. I also tried an UDP scan to the box on callagent and gateway port: PORT STATE SERVICE 2727/udp open|filtered unknown 2427/udp closed unknown I found those results a little bit strange because it should be the 2427 port opened, as it was in capture. Internet Protocol, Src: <ISP MGCP Server>, Dst: <My WAN Address> User Datagram Protocol, Src Port: mgcp-callagent (2727), Dst Port: mgcp-gateway (2427) Does someone has any idea about how having my box responding to my requests ? Thanks in advance and sorry for my english.

  Read the article

• Random Computer Crashes

  - by Josh W.

  Ok, here's a wierd one for you all. Occasionally my PC here at work will crash in a very peculiar way. My dual monitors will suddenly go blank as if there is no longer a video signal, the USB mouse light will go dark and mouse stays unresponsive, the keyboard lights will not change status when the appropriate keys are pressed (Num/Caps/Scoll Lock). The CD Tray WILL open and close. But the computer will not respond to a ping request. For all intents & purposes it's as if the computer is off, except it wasn't intentional by me. The power light and internal fans are still on and I've now lost any unsaved work. Now here's where it gets wierd. This PC is part of a batch of PC's we got from a local vendor who does our initial system builds. Mine, and 6 other co-workers PCs all have the same issue. Originally we thought it was a bad combination of hardware, but through trial and error the only thing we haven't eliminated are the OS, Mobo & CPU. The problem was so bad for some of them that they ended up going back to their 5 year old dinosaurs in order to get some work done, for me the problem isn't as bad, maybe once every other day or so, but still enough to bite me in the ass if I've forgotten my ritualistic pressing of CTRL-S every 1-5 minutes. In this case we've tried two different video cards, two different power supplies, two different memory configurations, running on a UPS/not on UPS, updating/rolling back video drivers, three different bios revisions. The only things we haven't swapped are the mobo & cpu, mainly because a new mobo means a new Hardware Abstraction Layer, ie re-install of windows and there's alot of other software on this PC that takes forever to reload by hand. There was a base image that our systems team created with all the drivers installed and the basic setup of software our company uses, but they then must customize the setup for us programmers so it takes a while to get a new configuration up and going. I'm a programmer by day and am usually pretty good at diagnosing computer problems whether through trial and error or not. We've pretty much exhausted all the ideas we can think of here, short of a new mobo/cpu. Was hoping someone out there might have anything else we can try.. Relevant Parts: OS: XP Pro 32-bit Motherboard: Intel DG41RQ CPU: Intel Core-2 Quad Q9400 @ 2.66GHz Current BIOS Version/Date Intel Corp. RQG4110H.86A.0014.2010.0306.1151, 3/6/2010 Dual LCD's, Viewsonic VG930m & Samsung SyncMaster 910v (other people have different models, but listed in case there's some very wierd problem with the signals being sent/received) PS/2 Keyboard USB Microsoft Intellimouse BIOS Versions Tried: R 0013 12/23/2009 R 0014 3/6/2010 Video cards Tried GeForce 8400 GS Radeon HD 4350 - ASUS EAH4350 Two Different Power Supplies a 380W & 550W Ram Configurations 2GB - 1 x 2GB 4GB - 2 x 2GB

  Read the article

• Linux Best Practices

  - by Zac

  I'm a life-long Windows developer switching over to Linux for the first time, and I'm starting off with Ubuntu to ease the learning curve. My new laptop will primarily be a development machine: 6GB RAM, 320 GB HD. I'd like there to be 2 non-root users: (a) Development, which will always be me, and (b) Guest, for anyone else. I assume the root user is added by default, like System Administrator in Windows. (1) I'd like to mount /home to its own partition, but how does this work if I have two user accounts (Development and Guest)? Are there 2 separate /home directories, or do they get shared? Is it possible to allocate more space for Development and only a tiny bit of space for Guest in GRUB2? How?!?! (2) I'm assuming that its okay that all of my development tools (Eclipse & plugins, SVN, JUnit, ant, etc.) and Java will end up getting installed in non-/home directories such as /usr and /opt, but that my Eclipse/SVN workspace will live under my /home directory on a separate partition... any problems, issues, concerns with that? (3) As far as partitioning schemes, nothing too complicated, but not plain Jane either: Boot Partition, 512 MB, in case I want to install other OSes Ubuntu & non-/home file system, 187.5 GB Swap Partition, 12 GB = RAM x 2 /home Partition, 120 GB I don't have any bulky media data (I don't have music or video libraries, this is a lean and mean dev machine) so having 320 GB is like winning the lottery and not knowing what to do with all this space. I figured I'd give a little extra space to the OS/FS partition since I'll be running JEE containers locally and doing a lot of file IO, logging and other memory-instensive operations. Any issues, problems, concerns, suggestions? (4) I was thinking about using ext4; seems to have good filestamping without any space ceiling for me to hit. Any other suggestions for a dev machine? (5) I read somewhere that you need to be careful when you install software as the root user, but I can't remember why. What general caveats do I need to be aware of when doing things (installing packages, making system configurations, etc.) as root vs "Development" user? Thanks!

  Read the article

• Managing hosts and iptables in scalable architecture

  - by hakunin

  Let's say I have a load balancer in front of 3 app servers. Let's say I also have these services available at certain IPs: Postgres server Redis server ElasticSearch server Memcached server 1 Memcached server 2 Memcached server 3 So that's 6 nodes at 6 different IP addresses. Naturally, every one of my 3 app servers needs to talk to these 6 servers above. Then, to make it a bit funkier, I also have 3 worker servers. And each worker also talks to the above 6 servers, but thankfully workers and apps never need to talk to each other. Now's the kicker. Everything is on Digital Ocean VPS. What that means is: you have no private network, no private IPs. You only have separate, random IP address on each machine. You can't mask them or anything. So in order to build a secure environment I would have to configure some iptables. For example: Open app servers be accessed by load balancer server Open redis, ES, PG, and each memcached servers to be accessed by each app's IP and each worker's IP This means that every time I add an app or worker I have to also reconfigure iptables in those above 6 servers to welcome the new app or worker. Is there a way to simplify this type of setup? I was thinking — what if there was a gateway machine between apps/workers and the above 6 machines. This way all the interaction would always happen via the gateway server, and when I add a new app or worker I wouldn't need to teach the 6 servers to let it in. If I went this route, then I'd hope a small 512mb server could handle that perhaps, and there wouldn't be almost any overhead. Or would there? Please help with best way to handle this situation. I would appreciate an answer as concrete as possible. I don't think this is too specific, because this general architecture is very common, and Digital Ocean is becoming increasingly popular. A concrete solution here would be much appreciated by many.

  Read the article

• Why do I sometimes get 'sh: $'\302\211 ... ': command not found' in xterm/sh?

  - by amn

  Sometimes when I simply type a valid command like 'find ...', or anything really, I get back the following, which is completely unexpected and confusing (... is command name I type): sh: $'\302\211...': command not found There is some corruption going on I think. I don't use color in my prompt, I am using the Bash shell in POSIX mode as sh (chsh to /bin/sh and so on - $SHELL is sh). What is going on and why does this keep happening? Anything I can debug? I think this is more of an xterm issue than sh, or at least a combination of the two. Files, for context: My /etc/profile, as distributed with Arch Linux x86-64: # /etc/profile #Set our umask umask 022 # Set our default path PATH="/usr/local/sbin:/usr/local/bin:/usr/bin" export PATH # Load profiles from /etc/profile.d if test -d /etc/profile.d/; then for profile in /etc/profile.d/*.sh; do test -r "$profile" && . "$profile" done unset profile fi # Source global bash config if test "$PS1" && test "$BASH" && test -r /etc/bash.bashrc; then . /etc/bash.bashrc fi # Termcap is outdated, old, and crusty, kill it. unset TERMCAP # Man is much better than us at figuring this out unset MANPATH My /etc/shrc, which I created as a way to have sh parse some file on startup, when non-login shell. This is achieved using ENV variable set in /etc/environment with the line ENV=/etc/shrc: PS1='\u@\H \w \$ ' alias ls='ls -F --color' alias grep='grep -i --color' [ -f ~/.shrc ] && . ~/.shrc My ~/.profile, I am launching X when logging in through first virtual tty: [[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec xinit -- -dpi 111 My ~/.xinitc, as you can see I am using the system as a Virtual Box guest: xrdb -merge ~/.Xresources VBoxClient-all awesome & exec xterm And finally, my ~/.Xresources, no fancy stuff here I guess: *faceName: Inconsolata *faceSize: 10 xterm*VT100*translations: #override <Btn1Up>: select-end(PRIMARY, CLIPBOARD, CUT_BUFFER0) xterm*colorBDMode: true xterm*colorBD: #ff8000 xterm*cursorColor: S_red Since ~/.profile references among other things /etc/bash.bashrc, here is its content: # # /etc/bash.bashrc # # If not running interactively, don't do anything [[ $- != *i* ]] && return PS1='[\u@\h \W]\$ ' PS2='> ' PS3='> ' PS4='+ ' case ${TERM} in xterm*|rxvt*|Eterm|aterm|kterm|gnome*) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033]0;%s@%s:%s\007" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; screen) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033_%s@%s:%s\033\\" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; esac [ -r /usr/share/bash-completion/bash_completion ] && . /usr/share/bash-completion/bash_completion I have no idea what that case statement does, by the way, it does look a bit suspicious though, but then again, who am I to know.

  Read the article

• Trouble creating FTP in Server 2008

  - by Saariko

  I have been trying to create an FTP server on my new Server 2008. I have been following both (very detailed and highly published here guides) For setting up using IIS Manager http://learn.iis.net/page.aspx/321/configure-ftp-with-iis-7-manager-authentication/ and For anonymous FTP http://www.trainsignaltraining.com/windows-server-2008-ftp-iis7 I am able to log as an anonymous user. My need is to use a named user, so I need to use the IIS Manager. I get error 530 when trying to log as a user. Connected to 127.0.0.1. 220 Microsoft FTP Service User (127.0.0.1:(none)): ftpmanager 331 Password required for ftpmanager. Password: 530-User cannot log in. Win32 error: Logon failure: unknown user name or bad password. Error details: Filename: Error: 530 End Login failed. ftp> I can not learn from this message anything. My password is set to: 1234 (so I don't think I make a mistake here - testing purposes only ofc) Thank you. Note - I went over other posts on SE that I read, and couldn't get the result: IIS7 Windows Server 2008 FTP -> Response: 530 User cannot log in. FTP Error 530, User cannot log in, home directory inaccessible. Having trouble setting up FTP server on Windows Server 2008 EDIT I think I found some errors with the physical path. Going to Basic settings, and Test Connection on the physical path, gave me the following error: The server is configured to use pass-through authentication with a built-in account to access the specified physical path. However, IIS Manager cannot verify whether the built-in account has access. Make sure that the application pool identity has Read access to the physical path. If this server is joined to a domain, and the application pool identity is NetworkService or LocalSystem, verify that \$ has Read access to the physical path. Then test these settings again. I am not sure which/whom should get access to the Root folder !? I want to point out, I managed to login with a domain user (change authorization and authentication methods) but this is NOT the requested solution. I checked to make sure that the FTP, folders, access is working properly. I am bit lost here. ==== More tries: I have enabled another Allow rule for ALL Users. I still get the same error. It seems that it doesn't matter if i use a correct or wrong password, I still get Error 530.

  Read the article

• installed mongo using brew but stuck at prompt

  - by user50946

  I have installed mongo using brew on my mac. When I give mongo command I see this MongoDB shell version: 2.4.6 connecting to: test but it stays there and never give me command prompt back anyone else noticed something like this I have reinstalled with no luck. The issue is persistent thanks Logs ***** SERVER RESTARTED ***** Fri Oct 18 08:11:48.360 [initandlisten] MongoDB starting : pid=2081 port=27017 dbpath=/usr/local/var/mongodb 64-bit host=Asims-MacBook-Air.local Fri Oct 18 08:11:48.360 [initandlisten] db version v2.4.6 Fri Oct 18 08:11:48.360 [initandlisten] git version: nogitversion Fri Oct 18 08:11:48.360 [initandlisten] build info: Darwin minimountain.local 12.5.0 Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64 x86_64 BOOST_LIB_VERSION=1_49 Fri Oct 18 08:11:48.360 [initandlisten] allocator: tcmalloc Fri Oct 18 08:11:48.360 [initandlisten] options: { bind_ip: "127.0.0.1", config: "/usr/local/etc/mongod.conf", dbpath: "/usr/local/var/mongodb", logappend: "true", logpath: "/usr/local/var/log/mongodb/mongo.log" } Fri Oct 18 08:11:48.361 [initandlisten] journal dir=/usr/local/var/mongodb/journal Fri Oct 18 08:11:48.361 [initandlisten] recover : no journal files present, no recovery needed Fri Oct 18 08:11:48.398 [websvr] admin web console waiting for connections on port 28017 Fri Oct 18 08:11:48.398 [initandlisten] waiting for connections on port 27017 Fri Oct 18 08:12:03.279 [signalProcessingThread] got signal 1 (Hangup: 1), will terminate after current cmd ends Fri Oct 18 08:12:03.279 [signalProcessingThread] now exiting Fri Oct 18 08:12:03.279 dbexit: Fri Oct 18 08:12:03.279 [signalProcessingThread] shutdown: going to close listening sockets... Fri Oct 18 08:12:03.279 [signalProcessingThread] closing listening socket: 9 Fri Oct 18 08:12:03.279 [signalProcessingThread] closing listening socket: 10 Fri Oct 18 08:12:03.280 [signalProcessingThread] closing listening socket: 11 Fri Oct 18 08:12:03.280 [signalProcessingThread] removing socket file: /tmp/mongodb-27017.sock Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: going to flush diaglog... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: going to close sockets... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: waiting for fs preallocator... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: lock for final commit... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: final commit... Fri Oct 18 08:12:03.282 [signalProcessingThread] shutdown: closing all files... Fri Oct 18 08:12:03.282 [signalProcessingThread] closeAllFiles() finished

  Read the article

• APC PHP cache size does not exceed 32MB, even though settings allow for more

  - by hardy101

  I am setting up APC (v 3.1.9) on a high-traffic WordPress installation on CentOS 6.0 64 bit. I have figured out many of the quirks with APC, but something is still not quite right. No matter what settings I change, APC never actually caches more than 32MB. I'm trying to bump it up to 256 MB. 32MB is a default amount for apc.shm_size, so I am wondering if it's stuck there somehow. I have run the following echo '2147483648' > /proc/sys/kernel/shmmax to increase my system's shared memory to 2G (half of my 4G box). Then ran ipcs -lm which returns ------ Shared Memory Limits -------- max number of segments = 4096 max seg size (kbytes) = 2097152 max total shared memory (kbytes) = 8388608 min seg size (bytes) = 1 Also made a change in /etc/sysctl.conf then ran sysctl -p to make the settings stick on the server. Rebooted, too, for good measure. In my APC settings, I have mmap enabled (which happens by default in recent versions of APC). php.ini looks like: apc.stat=0 apc.shm_size="256M" apc.max_file_size="10M" apc.mmap_file_mask="/tmp/apc.XXXXXX" apc.ttl="7200" I am aware that mmap mode will ignore references to apc.shm_segments, so I have left it out with default 1. phpinfo() indicates the following about APC: Version 3.1.9 APC Debugging Disabled MMAP Support Enabled MMAP File Mask /tmp/apc.bPS7rB Locking type pthread mutex Locks Serialization Support php Revision $Revision: 308812 $ Build Date Oct 11 2011 22:55:02 Directive Local Value apc.cache_by_default On apc.canonicalize O apc.coredump_unmap Off apc.enable_cli Off apc.enabled On On apc.file_md5 Off apc.file_update_protection 2 apc.filters no value apc.gc_ttl 3600 apc.include_once_override Off apc.lazy_classes Off apc.lazy_functions Off apc.max_file_size 10M apc.mmap_file_mask /tmp/apc.bPS7rB apc.num_files_hint 1000 apc.preload_path no value apc.report_autofilter Off apc.rfc1867 Off apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 256M apc.slam_defense On apc.stat Off apc.stat_ctime Off apc.ttl 7200 apc.use_request_time On apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock On apc.php reveals the following graph, no matter how long the server runs (cache size fluctuates and hovers at just under 32MB. See image http://i.stack.imgur.com/2bwMa.png You can see that the cache is trying to allocate 256MB, but the brown piece of the pie keeps getting recycled at 32MB. This is confirmed as refreshing the apc.php page shows cached file counts that move up and down (implying that the cache is not holding onto all of its files). Does anyone have an idea of how to get APC to use more than 32 MB for its cache size?? **Note that the identical behavior occurs for eaccelerator, xcache, and APC. I read here: http://www.litespeedtech.com/support/forum/archive/index.php/t-5072.html that suEXEC could cause this problem.

  Read the article

• System won't boot: Gigabyte HD 7790 1GB OC GPU issue or Corsair VS550 PSU issue?

  - by MGOwen

  Installed a new GPU, and PC won't boot. Turn it on and: No monitor signal at all (tried HDMI and VGA via DVI, on 2 working monitors). CPU and GPU fans DO spin, but No system beeps, no sounds from drives (they might make a small noise in the first 1 second or so, but there's definitely no OS loading or anything like that) If hit "power off" button it turns off immediately (no holding down for 3 seconds like usual) If I put my old HD 5670 GPU back in, everything works fine. But (plot twist!) card is not totally dead. My friend put it in his PC, and it works fine (he even played a game for 15 minutes, no issues). He has a Corsair TX850 850W and a Gigabyte MB. So my main theory is: the GPU isn't getting enough power from the PSU. But is it: Bad PSU? Seems unlikely, since it works fine with the other GPU. Also, the PSU Is brand new and 550W (single 42A/504W 12V rail). Overkill for this GPU. Corsair is a decent brand, but maybe just mine is faulty? Bad GPU? Could it be drawing more power than it should be, somehow, or something? Supposedly HD 7790 needs only 21A/75W on the 12v rail, though this one is factory overclocked a bit... but should that triple the power requirement? Something else? Could there be a motherboard incompatibility somehow? Both MB and GPU are less than a year old and PCI Express 3.0 x16. Things I've tried: Re-seating the video card Testing PC with old GPU (works fine, same PCIe slot). Checked AMD's stated amp/watt requirements of a 7790 and my PSU (see above). My PSU can output twice the amps (single rail) and 5x the Wattage a 7790 needs. Here are the full specs: Gigabyte HD 7790 1GB OC GPU Corsair VS550 550W PSU 4GB RAM AsRock H61M U3S3 motherboard i3-2100 500GB SATA HDD (2007-ish) blu-ray drive (new) PCI 802.11g card Edit: Motherboard BIOS Update seems to have fixed it. (If anyone has same problem and it doesn't work, comment here).

  Read the article

• Routing between 2 different subnets on 2 different interfaces in SonicOS

  - by Chris1499

  I'm having a bit of a problem allowing traffic between two of my subnets. Here's the structure I've built. The X0 interface has our windows server on it and it handles DHCP/DNS, etc. X1 has the WAN connection. The Sonicwall is handling DHCP on X2. The X3 interface is connected to a different vlan on the 48 port switch. The Sonicwall is handling DHCP on this network as well. So here's what i want to do. The network on X2 is for our guest wireless; i don't want it to be able to access any of the other networks, just the internet, so i that all blocked in the firewall. No issues there. The X3 network is going to be for programmable controllers, and needs to be able to access the X0 network where our computers are. This is where my problem is. I'm not able to get between the 192.168.2.xxx and the 192.168.1.xxx on interfaces X0 and X3 respectively. I have these rules set up in the firewall. The Lan Primary Subnet is the 192.168.2.0 on X0. So if i'm not mistaken, this will allow traffic between the two through the firewall. Now this is where I'm a little confused. Do i need to use NAT to get the traffic from X0 to go to X3 (and vice versa), or a static route, or both? Currently i have both, though i doubt they're done correctly (also in screenshot). I've tried to ping between the two without luck. Any advice, or if you see what's wrong with my setup, is much appreciated. If you need some more information, let me know. Thanks all! EDIT: So i found that i don't neither either NAT or a static route, that the setting in the firewall is enough. I can now ping from the 192.168.1.xxx network, however i can't access the server on the 192.168.2.xxx network. When i try to access i get "An error occured while reconnecting to Z: to server Microsoft Windows Network: The local device name is already in use. This connection has not been restored. What am i missing?

  Read the article

• Windows 7 & Virtual PC and Internet (gateway) problems on host PC

  - by Mufasa

  I upgraded to Windows 7 on a PC that is a few years old. The CPU was one revision away from having Hyper-V on it. So, I had to install Microsoft Virtual PC 2007 (v6.0.156.0) to run full XP instances instead of the seamless XP virtualization that is advertised so much. That's fine though; the 'older' version is useful since I use it to run different versions of the whole XP/IE stack for testing. (I'm a web developer.) ...And for the one 16-bit application we still use at the office for scheduling. * sigh * The virtual instances work fine, including networking. My issue is that after a reboot or coming out of sleep mode, my host Windows 7 won't connect to the Internet. It will connect to the local network fine. If I disable the "Virtual Machine Network Services" item (I'll call "VMNS" from here on) in the LAN Connection properties box, it starts working. But than the Virtual PC instances lose their network connectivity. If I re-enable VMNS again in the same instance, everything works (Internet on host and in the virtualized instances). But after the next reboot/sleep cycle this starts over. The route table gave me a clue though. When doing a cycle w/ VMNS enabled: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.3.51 20 0.0.0.0 0.0.0.0 10.0.10.10 10.0.3.51 276 ... After VMNS is disabled, the first route goes away. I assume that is for VMNS to intercept virtualized instance's network connections and forward them correctly? Just a guess though. More info: I checked my Firewall settings and Services (because I'm sort of a control nazi and turn off a lot) but couldn't find anything that made sense and if turned on changed anything. So it might be something there I'm missing, but I don't know what. My current hacked solution: So, I figured I'd mess with the routes myself to see if that helped, it did. If I run a route delete 0.0.0.0 on the universal (0.0.0.0) gateway routes, and add back in just the 2nd line with route add 0.0.0.0 mask 0.0.0.0 10.0.10.10--the one that points to my actual gateway (10.0.10.10)--then I don't have to mess with the disable/enable cycle of VMNS, and everything works. Running those two commands is faster then bringing up connection options and disabling and re-enabling VMNS, but I still don't want to have use that hack script every boot either. (Oh, and I also tried messing with hard-coding TCP/IP settings in my network adapter, including setting high metrics, etc., but that didn't help either.) Any suggestions on the right way to fix this?

  Read the article

• How to link specific ports to specific domains with Apache virtual hosts?

  - by theJoe

  We have a forward-facing linux box running Apache HTTP server that is acting as a reverse proxy for several back-end servers. The servers are accessed through specific domain names and ports and are set up as virtual hosts within Apache as such: Listen 8001 Listen 8002 <Virtualhost *:8001> ServerName service.one.mycompany.com ProxyPass / http://internal.one.mycompany.com:8001/ ProxyPassReverse / http://internal.one.mycompany.com:8001/ RewriteEngine On RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) RewriteRule .* - [F] </Virtualhost> <Virtualhost *:8002> ServerName service.two.mycompany.com ProxyPass / http://internal.two.mycompany.com:8002/ ProxyPassReverse / http://internal.two.mycompany.com:8002/ RewriteEngine On RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) RewriteRule .* - [F] </Virtualhost> The proxy server has only one IP address, and both domains are pointing to it. Accessing internal.one via service.one works fine, as does accessing internal.two via service.two. Now the problem is that Apache does not take the requesting domain into account when accessing the virtual hosts. What I mean is that both domains work for both ports: requests for service.one:8002 proxies to internal.two:8002, and requests for service.two:8001 proxies to internal.one:8001, where ideally both these requests should be denied. I can get around this by creating more virtual hosts that explicitly deny these requests: NameVirtualHost *:8001 NameVirtualHost *:8002 <Virtualhost *:8001> ServerName service.two.mycompany.com Redirect permanent / http://errorpage.mycompany.com/ </Virtualhost> <Virtualhost *:8002> ServerName service.one.mycompany.com Redirect permanent / http://errorpage.mycompany.com/ </Virtualhost> But this is not an ideal solution, since we plan to add more services to the proxy, and each new port would need to be explicitly denied on all the other domains, and each new domain would need to be explicitly denied on all ports it is not utilizing. As we add more services, the number of virtual hosts can get out of hand quickly. My question, then, is whether there is a better way? Can we explicitly tie specific ports to specific domains in a virtual host so that only that domain-port combination is processed, and all other combinations are not? Things I’ve tried: Adding NameVirtualHost *:8001, etc. without the additional virtual hosts. Setting ProxyRequests On and Off, as well as ProxyPreserveHost On and Off Adding the server name or IP address to the virtual host header, e.g. <VirtualHost service.one.mycompany.com:8001> Using the <proxy> directive inside the virtual host directive. Lots and lots of googling. The proxy server is running CentOS 6.2 64-bit, Apache HTTPD server 2.2.15. As mentioned, the proxy server has only one IP address, and all the domains we are using are pointing to it.

  Read the article

• Opscenter repair service times out. ERROR: Requested range intersects a local range [...]

  - by jlemire-zs

  My production cluster had the repair service enabled since april 16th with the default 9 days time to completion and repairs would complete properly. However, since may 22nd, it is being disabled automatically by Opscenter: From /var/log/opscenter/opscenterd.log: [...] 2014-06-03 21:13:47-0400 [zs_prod] ERROR: Repair task (<Node 10.1.0.22='6417880425364517165'>, (-4019838962446882275L, -4006140687792135587L), set(['zs_logging', 'OpsCenter'])) timed out after 3600 seconds. 2014-06-03 22:16:44-0400 [zs_prod] ERROR: Repair task (<Node 10.1.0.22='6417880425364517165'>, (-4006140687792135587L, -4006140687792135586L), set(['zs_logging', 'OpsCenter'])) timed out after 3600 seconds. 2014-06-03 22:16:44-0400 [zs_prod] ERROR: More than 100 errors during repair service, shutting down repair service 2014-06-03 22:16:44-0400 [zs_prod] INFO: Stopping repair service [...] From /var/log/opscenter/repair_service/zs_prod.log: [...] 2014-06-03 22:16:44-0400 [zs_prod] ERROR: Repair task (<Node 10.1.0.22='6417880425364517165'>, (-4006140687792135587L, -4006140687792135586L), set(['zs_logging', 'OpsCenter'])) timed out after 3600 seconds. 2014-06-03 22:16:44-0400 [zs_prod] ERROR: Task (<Node 10.1.0.22='6417880425364517165'>, (-4006140687792135587L, -4006140687792135586L), set(['zs_logging', 'OpsCenter'])) has failed 1 times. 2014-06-03 22:16:44-0400 [zs_prod] ERROR: 101 errors have ocurred out of 100 allowed. 2014-06-03 22:16:44-0400 [zs_prod] ERROR: More than 100 errors during repair service, shutting down repair service 2014-06-03 22:16:44-0400 [zs_prod] INFO: Stopping repair service On the nodes on which the repair fails, from /var/log/cassandra/system.log: ERROR [RMI TCP Connection(93502)-10.1.0.22] 2014-06-03 20:12:28,858 StorageService.java (line 2560) Repair session failed: java.lang.IllegalArgumentException: Requested range intersects a local range but is not fully contained in one; this would lead to i mprecise repair at org.apache.cassandra.service.ActiveRepairService.getNeighbors(ActiveRepairService.java:164) at org.apache.cassandra.repair.RepairSession.<init>(RepairSession.java:128) at org.apache.cassandra.repair.RepairSession.<init>(RepairSession.java:117) at org.apache.cassandra.service.ActiveRepairService.submitRepairSession(ActiveRepairService.java:97) at org.apache.cassandra.service.StorageService.forceKeyspaceRepair(StorageService.java:2620) at org.apache.cassandra.service.StorageService$5.runMayThrow(StorageService.java:2556) at org.apache.cassandra.utils.WrappedRunnable.run(WrappedRunnable.java:28) These errors, which only occurs if the repair service is running, are the only errors these nodes experience. Outside of the repair task, the Cassandra cluster works perfectly. I am running Opscenter 4.1.2 with a 6 nodes DSE 4.0.2 cluster installed on linux virtual machines. The nodes run a vanilla installation of Ubuntu Server 12.04 64-bit and DSE was installed and secured according to the provided installation documentation. I have been experiencing that problem on my development cluster for a while too (with DSE 4.0.0, 4.0.1 and 4.0.2), but I thought this was because of some configuration error on my part. The problem has appeared spontaneously at some point too. The Cassandra cluster has been working very smoothly with a good write throughput. It is very stable and has enough resources to work with. We did not notice any problems with the applications that depend on it.

  Read the article

• SQL Server suddenly using only a small portion of CPU.

  - by hermiod

  We've got a Windows 2008 R2 server running SQL Server 2008. All of a sudden, the SQLServer process is refusing to go above 20% CPU usage. As of last week, when running a heavy query against the db it would rise to 100% usage as I would expect. We've had this server for a while and it seems strange that it would just suddenly have this limit. This limit is causing our queries to take a lot longer than they normally would. No one has (knowingly at least) made any changes to the server configuration. After a bit of investigation, I discovered the sys.dm_os_sys_memory view. This shows 'available physical memory is high' bu at the same time the available physical memory is 339552kb where as the total is 4193848kb. It is worth noting that this is a virtual server running on vmware. Is there a setting somewhere with in SQL Server that sets the maximum CPU usage? I've found the settings in resource governor, although this is currently off as it always has been. We have recently started using Spotlight for SQL Server by Quest Software. It's playback database was located on this server for a short time this morning, I first noticed the problem shortly afterwards, although I hadn't been doing any queries prior to this so I don't know if this is the point at which the problem began, however the database was working as expected on Friday afternoon. The Windows log shows that the following settings were applied to the SpotlightPlaybackDatabase when it was created. 02/21/2011 08:45:02,spid60,Unknown,Setting database option TORN_PAGE_DETECTION to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option MULTI_USER to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option READ_WRITE to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option AUTO_UPDATE_STATISTICS to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option AUTO_CREATE_STATISTICS to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option ANSI_WARNINGS to OFF for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option CONCAT_NULL_YIELDS_NULL to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option RECOVERY to SIMPLE for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option QUOTED_IDENTIFIER to OFF for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option AUTO_CLOSE to OFF for database SpotlightPlaybackDatabase. Could any of these settings changes modified the settings applied to the whole server?

  Read the article

• Hyper-V Ubuntu Networking Problems Copying Large Amounts of Data

  - by Anonymous

  I am trying to copy a large amount (about 50 GB) of data over my network from a Hyper-V-hosted virtual machine running Ubuntu 11.04 (Natty Narwhal) to another (non-virtual) Ubuntu host that I plan to use for testing upgrades to one of our web applications. The problem I am having is with the virtual machine, which I shall refer to in what follows as "source.host". This machine is running 64-bit Ubuntu Server with the 2.6.38-8-server kernel and the Microsoft Linux Integration Components for Hyper-V kernel modules (hv_utils, hv_timesource, hv_netvsc, hv_blkvsc, hv_storvsc, and hv_vmbus) loaded. It uses a Hyper-V "synthetic network adapter" for its networking interface. To do the copy, I log on to the machine with the data and run the following commands (Call the remote machine "destination.host".): $ cd /path/to/data $ tar -cvf - datafolder/ | ssh [email protected] "cat > ~/data.tar" This runs for a while and then suddenly stops after transferring somewhere from 2-6 GB. The terminal on the source.host machine displays a Write failed: broken pipe error. The odd part is this: after this occurs, the "source.host" machine is no longer able to talk to the rest of the network. I cannot ping any other hosts on the network from the "source.host" machine, and I cannot ping the "source.host" machine from any other host on the network. I am equally unable to access the any of the web services hosted on "source.host". Running ifconfig on "source.host" shows the network adapter to be up and running as usual with the correct IP address and everything. I tried restarting the networking service with $ /etc/init.d/networking restart but the problem does not go away. Restarting the machine makes it capable of talking to the network again -- it can ping and be pinged by other hosts, and the web services are also accessible and usable as normal -- but attempting the copy operation again results in the same failure, requiring another restart. As an experiment, I tried replacing the tar -- ssh pipeline above with a straight scp: $ scp -r datafolder/ [email protected]:~ but to no avail Thinking that the issue might have to do with the kernel packet-send buffers filling up, I tried increasing the buffer size to 12 MB (up from the 128 KB default) with # echo 12582911 > /proc/sys/net/core/wmem_max but this also had no effect. I'm guessing at this point that it might be a problem with the Microsoft synthetic network driver, but I don't really know. Does anyone have any suggestions? Thank you very much in advance!

  Read the article

• IT merger - self-sufficient site with domain controller VS thin clients outpost with access to termi

  - by imagodei

  SITUATION: A larger company acquires a smaller one. IT infrastructure has to be merged. There are no immediate plans to change the current size or role of the smaller company - the offices and production remain. It has a Win 2003 SBS domain server, Win 2000 file server, linux server for SVN and internal Wikipedia, 2 or 3 production machines, LTO backup solution. The servers are approx. 5 years old. Cisco network equippment (switches, wireless, ASA). Mail solution is a hosted Exchange. There are approx. 35 desktops and laptops in the company. IT infrastructure unification: There are 2 IT merging proposals. 1.) Replacing old servers, installing Win Server 2008 domain controller, and setting up either subdomain or domain trust to a larger company. File server and other servers remain local and synchronization should be set up to a centralized location in larger company. Similary with the backup - it remains local and if needed it should be replicated to a centralized location. Licensing is managed by smaller company. 2.) All servers are moved to a centralized location in larger company. As many desktop machines as possible are replaced by thin clients. The actual machines are virtualized and hosted by Terminal server at the same central location. Citrix solutions will be used. Only router and site-2-site VPN connection remain at the smaller company. Backup internet line to insure near 100% availability is needed. Licensing is mainly managed by larger company. Only specialized software for PCs that will not be virtualized is managed by smaller company. I'd like to ask you to discuss both solutions a bit. In your opinion, which is better from the operational point of view? Which is more reliable, cheaper in the long run? Easier to manage from the system administrator's point of view? Easier on the budget and easier to maintain from IT department's point of view? Does anybody have any experience with the second option and how does it perform in production environment? Pros and cons of both? Your input will be of great significance to me. Thank you very much!

  Read the article

• How to flip video feed that's presented upside down?

  - by Zuul

  Skype an other applications running under windows 7 Ultimate are presenting the video captured from the laptop built-in webcam upside down. I've tried many solution that I was able to find regarding issues like this, but to no avail. Some of the most relevant are discussed here: From Skype Support Network, the thread why is my video image of myself upside-down??? From ASUSTek Forums, the thread Built-in camera upside down Both present several potential solutions to this issue, but I've been unable to fix it for the laptop ASUS U6S. What I've already tried: Changing Drivers The driver that works must be the one from Windows, all others available from ASUS drivers either don't install or install but the webcam doesn't provide any video feed. This disallows all options that concern using an older driver or editing the .inf file as to manually adjust the settings. ASUS does not provide drivers for Windows 7, so I've used drivers from Windows Vista 32 Bit. Using the application manycam This application actually solves the issue (temporarily), but creates new ones: If I use the application to flip the video feed, Skype video call cease to work. This application doesn't save the settings, at least I wasn't able to find any way to save the settings I've used to flip the video feed. A computer restart brings all back to how it was, video feed upside down and if the application is still installed, Skype continues to fail on video calls. Regedit I've searched thru Windows Registry Editor as to find any reference to the webcam settings, hopping to find a key with the Flip parameter, since it's up to the driver to flip the image (by what I could ascertain from this problem). Couldn't find any reference to such settings, either they actually don't exist within the Windows Registry or they use some weird name that I could think off. System Configuration I was able to access the webcam system settings from the Windows Device Manager, but the tab that actually has the Image Rotation setting is always disabled. The same goes for the settings available from the Skype webcam options (that essentially is presenting the same settings as Windows Device Manager, just within a custom Skype pop-up). Question: How can I flip the video feed from the laptop's built-in webcam, as to properly see and broadcast the video?

  Read the article

• Educate me - should I buy these prebuilt NAS (which is better) or make my own?

  - by user29336

  I'm trying to learn as much as possible, and I think I've learned quite a bit so bear with me here under my confusion. I found a coupe NAS setups. I'm not sure if one is better than the other, other than the price being higher on some, and some coming with drives VS not. Let me list my setup so you can get an idea of what I want to provide: Macbook Pro Macbook Mini for Media streaming (so far) Windows 7 Gaming Computer Xbox 360 I'd like to provide a storage system for all these devices so they can access files very easily, I'd also like any of these devices to be able to stream media from this storage system. I'd like this storage system to be hassle free in terms of my confidence in the data integrity. If a drive fails, I want to know that I can replace the drive and all my files will still exist. I'd like to access this storage system OUTSIDE of my LAN. If I'm out on a job for work I'd like to go in, or be able to have people DL some files. This brings me to a question, is this what iSCSI is? I'd like this data system to be able to download torrents. I want to mount any drive on this storage system onto my OSX laptop as if it were a local drive attached. (Is this with iSCSI is?) I'd like this system to have a GOOD web based GUI. I don't want to install software to use it. I believe those are the most of my requirements. If I'm missing something that I have no knowledge about, can someone educate me? Here are the systems I found: $729ish on Newegg Lacie 5Big Network 2 (comes with 5TB of space. iSCSI / mac compatible, torrents, nice ui, + others?) Is this overpriced for what it provides? It almost seems like a great deal to me because of the 5TB of space it comes with vs the other NAS systems that don't come with storage but cost $600-700. Should I get a different NAS system? Netgear? Others? Do they have same features? Better? Is it better to buy your own disks? What about making my own? I'm tech savy all around. It seems cheaper to buy a premade one especially with the support/warranty it provides...

  Read the article

• How should we serve files in a small bioinformatics cluster?

  - by cespinoza

  We have a small cluster of six ubuntu servers. We run bioinformatics analyses on these clusters. Each analysis takes about 24 hours to complete, each core i7 server can handle 2 at a time, takes as input about 5GB data and outputs about 10-25GB of data. We run dozens of these a week. The software is a hodgepodge of custom perl scripts and 3rd party sequence alignment software written in C/C++. Currently, files are served from two of the compute nodes (yes, we're using compute nodes as file servers)-- each node has 5 1TB sata drives mounted separately (no raid) and is pooled via glusterfs 2.0.1. They each have as 3 bonded intel ethernet pci gigabit ethernet cards, attached to a d-link DGS-1224T switch ($300 24 port consumer-level). We are not currently using jumbo frames (not sure why, actually). The two file-serving compute nodes are then mirrored via glusterfs. Each of the four other nodes mounts the files via glusterfs. The files are all large (4gb+), and are stored as bare files (no database/etc) if that matters. As you can imagine, this is a bit of a mess that grew organically without forethought and we want to improve it now that we're running out of space. Our analyses are I/O intensive and it is a bottle neck-- we're only getting 140mB/sec between the two fileservers, maybe 50mb/sec from the clients (which only have single NICs). We have a flexible budget which I can probably get up $5k or so. How should we spend our budget? We need at least 10TB of storage fast enough to serve all nodes. How fast/big does the cpu/memory of such a file server have to be? Should we use NFS, ATA over Ethernet, iSCSI, Glusterfs, or something else? Should we buy two or more servers and create some sort of storage cluster, or is 1 server enough for such a small number of nodes? Should we invest in faster NICs (say, PCI-express cards with multiple connectors)? The switch? Should we use raid, if so, hardware or software? and which raid (5, 6, 10, etc)? Any ideas appreciated. We're biologists, not IT gurus.

  Read the article

• Holding off Windows 2000/3 Server in Shutdown

  - by user1668993

  We have a C# VS2010 application running on a Windows 2000 Server box (there is also a Windows 2003 Server box) as pretty much the only application running. We remove power from the box. There is a short duration battery (maybe 3 minutes of power) which then waits 10 seconds and then decides things are coming down and notifies Windows that it needs to shut down. Windows sends a CTRL_SHUTDOWN_EVENT event to the application which fields it and tries to keep Windows from going down for a while to let another computer which communicates with this one time to do some file work on the first computer. It does this by a timing loop and after the loop is over, it exits gracefully and the computer shuts down. Nice plan but it doesn't work. The application gets to maybe 20 seconds and the application is forcibly killed by Windows and Windows shuts down. At 90 seconds, the hardware firmware running the battery turns off power to the computer. I have tried searching to find out how to hold off Windows for a bit of time. I tried creating (it wasn't there) the HKEY_LOCAL_MACHINE subtree: \SYSTEM\CurrentControlSet\Control\WaitToKillAppTimeout registry key to 60000 but though it seemed to keep the popup from happening, Windows itself died at about the same amount of time -- we think without having the opportunity to shut itself down gracefully. Maybe the registry key worked but wasn't enough. Basically I have an "ill-mannered" application which is refusing to shut down (for the best of reasons) and without the registry key thing, Windows eventually shuts it down anyway and then shuts itself down. With the registry change, we think what is happening is that Windows doesn't shut down the application but Windows itself is killed suddenly without shutting down but power is still not pulled for about another minute, and then power is pulled. So maybe we have layers here. First there is how long the application tries to stay open. Then there is how long Windows is prepared to allow it to stay open. Then there is ... something... which kills windows. Then there is the power loss. Anyone have any ideas how we can get windows to stay open and in operation say to 70 seconds instead of about 20? Is our registry key right, but not enough? Is there some additional key we need to set to determine how long after windows is notified of a shutdown before it just kills itself? Thanks in advance.

  Read the article

• What happens to missed writes after a zpool clear?

  - by Kevin

  I am trying to understand ZFS' behaviour under a specific condition, but the documentation is not very explicit about this so I'm left guessing. Suppose we have a zpool with redundancy. Take the following sequence of events: A problem arises in the connection between device D and the server. This causes a large number of failures and ZFS therefore faults the device, putting the pool in degraded state. While the pool is in degraded state, the pool is mutated (data is written and/or changed.) The connectivity issue is physically repaired such that device D is reliable again. Knowing that most data on D is valid, and not wanting to stress the pool with a resilver needlessly, the admin instead runs zpool clear pool D. This is indicated by Oracle's documentation as the appropriate action where the fault was due to a transient problem that has been corrected. I've read that zpool clear only clears the error counter, and restores the device to online status. However, this is a bit troubling, because if that's all it does, it will leave the pool in an inconsistent state! This is because mutations in step 2 will not have been successfully written to D. Instead, D will reflect the state of the pool prior to the connectivity failure. This is of course not the normative state for a zpool and could lead to hard data loss upon failure of another device - however, the pool status will not reflect this issue! I would at least assume based on ZFS' robust integrity mechanisms that an attempt to read the mutated data from D would catch the mistakes and repair them. However, this raises two problems: Reads are not guaranteed to hit all mutations unless a scrub is done; and Once ZFS does hit the mutated data, it (I'm guessing) might fault the drive again because it would appear to ZFS to be corrupting data, since it doesn't remember the previous write failures. Theoretically, ZFS could circumvent this problem by keeping track of mutations that occur during a degraded state, and writing them back to D when it's cleared. For some reason I suspect that's not what happens, though. I'm hoping someone with intimate knowledge of ZFS can shed some light on this aspect.

  Read the article

• How to unmangle PDF format into a usable text or spreadsheet document?

  - by Chuck

  Upon requesting some daily/hourly sales data from a coworker who is responsible for such requests, I was given a series of PDF files. The point of sale program that is used, for some reason, answers requests for this type of information in the form of PDF files. The issue: The PDF files look to be in a format that should easily be copy and pasted into a spreadsheet. There are three columns that look to be neatly organized across two pages. When copy/pasting the first page, all three columns from the PDF's first page are dumped into a single column consisting of the Date followed by the Hours for the transactions on that day. The end of this Date/Time information is followed by all of the Total Sales values that should be attached a Date and Time of the transaction. (NOTE: There are no duplicated Dates in the Date column, ie, Multiple transactions for a day only have one yyyy/mm/dd listed for the first row but not the following rows.) While it was a huge pain, it was possible to, in about four or five steps, get the single column of data broken out into three columns that matched the PDF. The second page of the PDF file, when attempting to copy/paste into a spreadsheet, creates a single column with the first third of the cells being the Dates from the PDF, the second third of the cells being the Hours of the transactions and the final third of the cells being filled with the Total Sales. After the copy/paste there is no way to figure out which Hours belong to which Dates or Total Sales due to the lack of the duplicated Dates in the Date column as mentioned above. My PDF-fu is next to non-existent. I've just now started to work with PDF editors and some www.convertmyPDFforfree.com websites, so far, with absolutely nothing remotely coming anywhere near usable output. (Both methods have so far done nothing but product blank documents.) Before I go back and pester my co-worker into figuring out a way to create a report in some other format than PDF, is there any method by which to take the data that looks to be formatted correctly in a PDF and copy/paste it into a spreadsheet that will look the same? I appreciate any help that can be made available. The sales data isn't so sensitive that I couldn't part with a bit to let somebody actually see what it is that needs to be dealt with, just let me know. The PDF's are less than 100kb each so sending them shouldn't be a burden to any interested party.

  Read the article

• Resetting root password on Fedora Core 3 - serial cable access only

  - by Sensible Eddie

  A little background: We have an old rackmount server running a customised version of Fedora, manufactured by a company called Navaho. The server is a TeamCAT, running some proprietary rubbish called Freedom2. We have to keep it going - the alternative is extraordinarily expensive, and the business is not likely to be running much longer to justify changing things. Through one means or another, it has fallen upon me to try and resolve our lack of root access. The previous admin has fallen under the proverbial bus, and nobody has any clue. We have no access to the root account for this server. ssh is running on the server, and there is one account admin that we can login with, however it has no permission to do anything (ironic...) The only other way into the server is with a null-modem serial cable. This works... up to a point. I can see the BIOS, I can see the post BIOS screen, and then I see "Starting grub", followed by another screen with about four lines of Linux information, but then it stops at that point. The server continues booting, and all services come online after around two minutes, but the serial terminal displays no more information. I understand it is possible to put Linux into "single user mode" to reset a root password, but I have no idea how to do this beyond trying to interrupt it at the grub stage listed above. When I have tried it just froze. It was almost like grub had appeared (since the server did not continue booting) but I couldn't see it on the serial terminal. Which made me think maybe the grub screen has some different serial settings? I don't know... it's the first time I've ever used serial for access! A friend of mine suggested trying to use a Fedora boot CD. We could boot from USB, so something along this approach is possible but again we still can only see what's going on with the serial terminal, so it might not be achievable. Does anyone have any suggestions for things I can try? I appreciate this is a bit of a long shot, but any assistance would be invaluable. *UPDATE 1 - 28/8/12 * - we will be making some attempts on this today and will post further details later!

  Read the article

• Expendable, Redundant, Easily recoverable

  - by MeIr

  I am desperate at this point, I have been looking for "Big storage" solution for a while on my own and I can't find anything that would suite my needs. But now push came to shove. Current situation: I have about 6TB data storage (already full) - Drobo. Yesterday Drobo died on me and it put me into bad situation - I can't recover my data without buying another Drobo. From extensive research online I realized that Drobo is not the safest bet and by now it seems very poor choice. I ordered new Drobo to try to get my data back, however I don't want to be in the same situation later and continuing using Drobo promises this event to re-occur. What I am looking for: 1) Inexpensive setup. 2) Dynamically extendable - add more drives and/or replace a drive with bigger capacity. 3) Redundant - setup against 1-3 drive failure, will depend on total number of drives. For the sake of argument let's assume for every 4 drives one should be able to fail without data loss. 4) Easy data recovery - let's say unforeseen happens, I would like to be able to recover information without buying new tools or replacements - example: new Drobo. 5) Should be USB or Network Attach Storage 6) No demand on speed. Doesn't have to be fast, I am not doing video editing on the setup. However if option exists, would be nice to have a decent speed. After thoughts: I reviewed few options and FreeNAS looks nice, but it doesn't have #2 - Dynamic extendability. There are work around with Pools but it seems a bit complicated and unnecessary. More over it seems like data safety is a big question - saw some horror stories. Please advise on what options I have and what seems like an optimal solution (if any). I don't care if it has to be Windows or Linux box or any other OS and/or software that has to run on top, but simple solution is more attractive. Thank you! P.S: Feel free to ignore "After thoughts".

  Read the article

< Previous Page | 761 762 763 764 765 766 767 768 769 770 771 772  | Next Page >