Search Results

Search found 36698 results on 1468 pages for 'old linux fan'.

Page 765/1468 | < Previous Page | 761 762 763 764 765 766 767 768 769 770 771 772  | Next Page >

• Very strange networking problem in all computers in my house

  - by Anthony

  I have three computers in my house: One desktop (wired), and two laptops (wireless). I'm using Cox Communications (yes they suck), and yesterday they had a major outage. I know it was them because I called them up when I started losing connection to the internet. All the computers can connect just fine, but they don't have internet access. It just says "local only". The weird thing is, some of them work occasionally. For the first day my laptop was working perfectly, while all the other computers couldn't connect. Later on in the day it got reversed, and the desktop was the one with internet access. By the second day the problem on Cox's end was fixed, but we still had no access. I called them up and they reset my modem, and did the usual troubleshooting stuff. It never fixed the problem, but we found out that the problem had to do with conflicting IP addresses. My router was a Linksys WRT54G and it was about 5 years old. I figured it might have gotten damaged from the outage since it was so old, and now it's having trouble "fixing itself" and giving out the proper IP addresses. So I bought a new router, a Cisco Linksys E1000. I set everything up, and still the same problem. My computer has access right now (that's how I'm writing this), but no other computers seem to be able to get access. Is there possible damage to the modem? Can someone help me please? Sorry for this being so long.

  Read the article

• How to deal with the extremely big *.ost files in a Terminal Server environment which is running out of space

  - by Wolfgang Kuehne

  Our Terminal Server is running out of hard disk space, and the major files which occupy most of the space are *.ost files of the Outook, which come form the users which use the Terminal Server all the time through remote desktop. The Outlook is installed on the Terminal Server and various users can use it. What would be a solution in this case. Is there a way to limit the size of the *.ost files? I read in forums that having the Outlook 2010 set up in Cached Exchange Mode isn't the best practice for an environment where the hdd space is a major constraint. First thing that came to my mind is using folder redirection, and place the ost files (together with the AppData forlder) in a network share, but this does not help, because the ost files are saved a part of the AppData folder which can not be redirected. Then I thought if it is possible to limit the size of the ost file? Or limit the time that it keeps emailed cached, say just emails from the last 6 months are sufficient. Another solutions that came to my mind, moving the ost files somewhere else, this required the old ost file to be removed, and creation of a new one. I am not quite sure if the new OST file will still have cached the emails which where available in the old ost, or will it start caching from where the other one left. What do you suggest?

  Read the article

• Remote Desktop *from* Windows 2008 R2 Server

  - by freefaller

  Summary: how do I create an RDC connection from a Windows 2008 server to another server? Our client will only allow us to connect to their server via a static IP address (which is fair enough), but unfortunately as we're a very small company we don't have one in the office. As a work around, we had the connection working through our old Windows 2003 server (dynamic-cloud from 1and1). .. however we have just rebuilt the server to run under Windows 2008 R2 (don't ask, but it was necessary), and now I simply cannot get the connection working. I have added an "Outbound Rule" to Windows Firewall with Advanced Security (TCP, All local ports, 3389 remote port - I have also tried the other way around). I have added a packet filter IP security rule with the same details. The 1and1 firewall rules (through their online control panel) allows for 3389 TCP and UDP. But it is simply not connecting (yes, the server is definitely on and able to accept connections) with the general error of... Remote Desktop can’t connect to the remote computer for one of these reasons: 1) Remote access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Is there anything obvious I've missed - or something I can use to find out where the request is being blocked? The new server is using the exact same IP address as before, so I don't believe that would be an issue. Unless it's trying to use an IPv6 address rather than the old IPv4 address that it was before? I apologise that I am not a network person by trade, but I know more than anybody else in my office!!

  Read the article

• what is the fastest way to copy all data to a new larger hard drive?

  - by SUPER user

  I was certain this would have been covered before, but I cannot find an answer amongst all the almost-duplicates that come up; sorry if I've missed something obvious. I have a full 320gb disk inside my machine, a new 1tb disk to replace it, and a USB 2.0 chassis. It is only data on a single partition, no OS/apps involved, and the old drive will be kept somewhere as backup (no secure wiping etc). The simple option would be to put new disk in USB chassis, copy files, then swap them over. But for USB pen drives, reading is around 4x faster than writing. If the same is true for a USB SATA chassis (is it?) then it would be significantly faster to swap the drives first and read from the old drive over USB, right? Then the other consideration is that copying lots of files is usually slower than a single file of equivalent size. Is Windows 7 smart enough to do everything in a single lump like that, or is there specialised software that should be used instead? (Even if SATA-SATA copying is faster than involving USB, knowing what to do when it isn't an option is useful information.) Summary: Does a USB SATA chassis suffer from a read/write inequality? (like a USB pen drive does, but unlike a direct SATA connection) Can Windows 7 do sequential access? (I can't find confirmation if Robocopy does this.) Or is it necessary to use a bootable CD/USB with something like Clonezilla to achieve sequential copy speeds?

  Read the article

• JSP Content Issue in Tomcat

  - by gautam vegeta

  There is one application where I work where there are still manual builds used i.e manually moving the servlet classes and jsp files from Dev to QA and finally to Prod. This is the method used in this application which cant be changed for some wierd reasons.BTW this is not the problem. We did a manual build where we transferred jsp files from QA to PROD recently. And we noticed that the jsp file content does not correspond to the updated jsp's but have the same content to the jsp file which was present in the server prior to the deployment. We did not re-start tomcat since jsp files upon updation automatically changes its contents. This problem persisted even after 6 hours of deployment If we consider the time standards which are different which may cause some delay. So to fix this we had to individually go into every jsp file and just type something save it and delete this change and save it.Then it worked perfectly. But finally the jsp file content before and after was never changed we just did this to change the modification date. If we think in terms of timestamp problem how can this be possible coz the old jsp files which were present in the server prior to deployment was atlest one month old and the ones getting deployed were defenitely newer than that. Why did this happen? This did not happen when we did same type of deployments earlier. How can we prevent this from happening in the future.

  Read the article

• Combining URL mapping and Access-Control-Allow-Origin: *

  - by ksangers

  I am in the progress of migrating an old banner system to a new one and in doing so I want to rewrite the old banner system's URL's to the new one. I load my banners via an AJAX request, and therefore I require the Access-Control-Allow-Origin to be set to *. I have the following VirtualHost configuration: <VirtualHost *:80> ServerAdmin [email protected] ServerName banner.studenten.net # we want to allow XMLHTTPRequests Header set Access-Control-Allow-Origin "*" RewriteEngine on RewriteMap bannersOldToNew txt:/home/user/banner.studenten.net/banner-studenten-net-to-ads-all4students-nl-map # check whether a zoneid exists in the query string RewriteCond %{QUERY_STRING} ^(.*)zoneid=([1-9][0-9]*)(.*) # make sure the requested banner has been mapped RewriteCond ${bannersOldToNew:%2|NOTFOUND} !=NOTFOUND # rewrite to ads.all4students.nl RewriteRule ^/ads/.* http://ads.all4students.nl/delivery/ajs.php?%1zoneid=${bannersOldToNew:%2}%3 [R] # else 404 or something ErrorLog ${APACHE_LOG_DIR}/banner.studenten.net-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/banner.studenten.net-access.log combined </VirtualHost> My map file, /home/user/banner.studenten.net/banner-studenten-net-to-ads-all4students-nl-map, contains something like: # oldId newId 140 11 141 12 142 13 Based on the above configuration I was expecting the following: GET /ads/ajs.php?zoneid=140 HTTP/1.1 Host: banner.studenten.net HTTP/1.1 302 Found ... Access-Control-Allow-Origin: * Location: http://ads.all4students.nl/delivery/ajs.php?zoneid=11 But instead I get the following: GET /ads/ajs.php?zoneid=140 HTTP/1.1 Host: banner.studenten.net HTTP/1.1 302 Found ... Location: http://ads.all4students.nl/delivery/ajs.php?zoneid=11 Note the missing Access-Control-Allow-Origin header, this means the XMLHttpRequest is denied and the banner is not displayed. Any suggestions on how to fix this in Apache?

  Read the article

• Error upgrading Ubuntu server from Intrepid to Jaunty

  - by Martin

  I'm trying to upgrade an old ubuntu server from 8.10 (Intrepid) to 9.04 (Jaunty). But it fails. root@server1:/# do-release-upgrade Checking for a new ubuntu release Failed Upgrade tool signature Failed Upgrade tool Done downloading extracting 'jaunty.tar.gz' Failed to extract Extracting the upgrade failed. There may be a problem with the network or with the server. Does anyone have an idea why I get this error and how to fix it? UPDATE: I think i might have tracked the problem down. My /etc/update-manager/meta-release looks like this: [METARELEASE] URI = http://changelogs.ubuntu.com/meta-release URI_LTS = http://changelogs.ubuntu.com/meta-release-lts URI_UNSTABLE_POSTFIX = -development URI_PROPOSED_POSTFIX = -proposed If i go to http://changelogs.ubuntu.com/meta-release it has this info for Jaunty: Dist: jaunty Name: Jaunty Jackalope Version: 9.04 Date: Thu, 23 Apr 2009 12:00:00 UTC Supported: 0 Description: This is the 9.04 release Release-File: http://archive.ubuntu.com/ubuntu/dists/jaunty/Release ReleaseNotes: http://changelogs.ubuntu.com/EOLReleaseAnnouncement UpgradeTool: http://archive.ubuntu.com/ubuntu/dists/jaunty-proposed/main/dist-upgrader-all/0.111.8/jaunty.tar.gz UpgradeToolSignature: http://archive.ubuntu.com/ubuntu/dists/jaunty-proposed/main/dist-upgrader-all/0.111.8/jaunty.tar.gz.gpg Those links starting with archive.ubuntu.com are broken since jaunty is EOL. I guess i could fix this by copying this file, replacing "archive" with "old-releases", host the modified file somewhere and change the url in the meta-release file. Is this a good solution or will it make me run into worse problems?

  Read the article

• undelete big files - mission impossible?

  - by johnrembo

  Hi, I've accidentaly deleted outlook.pst (6.7GB) file, while there was only 400MB free space left on primary NTFS partition (winxp). I've tried several recovery tools to get this file back. "Ontrack Easy Recovery Pro" found 0 pst files (complete scan mode), while "Recover My Files" in sector scan mode found 5 pst's, but 4 of them of sizes from 3 to 28 KB, while the 5th one - 1Gb. I've managed to succesfuly recover 1Gb pst file, which was 1 year old copy (the one used after the latest windows reinstall). Now, I'm frustrated and confused Why 1 year old file was succesfuly recovered if there were only 400MB left on primary partition? Where's 6.7GB file gone? I did some reading (i.e. here), and it seems that there's almost no probability to retrieve the file I'm looking for, but wait - none of recovery tools i've used found zero-sized pst file, moreover - if due to fragmentation a file might be corrupted - we could use scanpst.exe to fix some errors and survive with 10 or 100 emails missing - whatever. Could you please recommend some more sophisticated recovery tools for this particular task? Appretiate your help - thanks in advance

  Read the article

• Adding new SPNs to existing service ids

  - by jmh

  We have a tomcat server using spring-security kerberos to authenticate users to the webpage against active directory. There are around 25 domain controllers. The site has two CNAME based DNS aliases. The site currently has one Service ID with SPNs registered for the DNS A record as well as each of the CNAMEs. While everything is working right now, I don't know how to reliably change this configuration without possible downtime. The reason is that clients cache kerberos tickets: http://www.juniper.net/techpubs/en_US/uac4.2/topics/concept/user-role-active-directory-about.html The 'kerbtray.exe' program is helpful for viewing and deleting Kerberos tickets on the endpoint. Old tickets must be purged from the endpoint if SPNs are updated or passwords are changed (assuming the endpoint still has a cached copy of the ticket from a prior SPNEGO request to the MAG Series device. During testing, you should purge tickets before each authentication request. Description of "klist" program used to inspect/delete cached tickets: http://technet.microsoft.com/en-us/library/hh134826.aspx So if each of the clients (users running windows) who connect to my web server have kerberos tickets that become invalid as soon as I update the SPNs or passwords, how do I ensure changes are seamless? Are there any operations that can be done safely? I can't just ask all of the users to install klist and delete their old tickets.

  Read the article

• Repository bugzilla package changed to bugzilla3 in Lenny; upgradable?

  - by Pukku

  This question was asked in debianhelp.org almost half a year ago, but never got an answer. I wasn't the one who posted it, however I was today facing exactly the same question. Not sure if copying it to here as such is considered as inappropriate or something, but there's not really anything that I would even like to paraphrase... So let's just go. (I'm sure you will be happy to close it, if this is not the way to go :) Hello all! We are using a Bugzilla server install on a Debian 4/Etch server and are starting to look at the upgrade to Debian 5/Lenny. I was hoping to upgrade the existing Bugzilla server and database from the oldstable (v2.22) to the newer stable in Lenny (v3) when we get to doing a dist-upgrade. However from testing in a virtual machine it seems that the old package was called "Bugzilla" whereas the Lenny package is called "Bugzilla3" and I could not figure a way to directly upgrade between the two. Is it possible to establish some kind of upgrade path quickly after the dist-upgrade to minimise downtime using apt-get or aptitude? Going on past experiences I would not want to do a fresh install with the Bugzilla3 package and attempt to inject the old database into it (previous attempts failed miserably!) :(

  Read the article

• Port forwarding on D-Link DIR-615 super-slow, useless

  - by Jaroslav Záruba

  Hello I have replaced my old router with DIR-615 from D-Link, and now the port forwarding is so slow it makes the router practically useless for requests coming from outside of my network. Accessing the router itself (admin UI) from outside is without any issues, no delay whatsoever. But when I try to access a service residing on any of the computers in my network from outside the requests take minutes and minutes. (E.g. I can see source of my GWT-app main page, but loading additional CSS and JS files takes years.) If anyone could recommend any further diagnostics I should do to figure out what is happening it would be great. Few notes: happens with more services (web-app on Tomcat, viewing directory index via Apache) it does not make a difference whether the service is hosted on wired or wireless PC accessing the service on a localhost works fine, as does any 'inner' communication turning off firewall on target PC does not make difference either (makes sense) when I replace this router with the old one (both 192.168.1.1) everything works fine I see nothing suspicious in the router's log I believe I have the latest firmware (4.11) DIR-615 sucks, it already died once completely Regards Jarda Z.

  Read the article

• SSRS2008R2 report times out, but the underlying query executes in the Management Studio

  - by Matthew Belk

  A customer of mine recently moved servers and the new server has SQL2008R2. His old server was SQL2005. The new server has substantially better CPU, RAM, and disk performance than the old, but several reports time out while executing. When I run the underlying query in the SQL Management Studio, the query executes in sub-second time. The exact error message returned via the Report Manager UI is: An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. (rsReportServerDatabaseError) Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. It must be noted that this database is not just analytical; it's also fairly transactional, although the transaction volume is not exceptionally high. What can I do to improve the performance of the SSRS query engine? Are there settings in the data source I can adjust, or in the SSRS config files?

  Read the article

• MicroSD card isn't detected by computer, apparently usable only with phone

  - by paulcjoubert

  I have a 4GB MicroSD card that apparently only works (in the sense that the device detects and can read and write from and to the card) with my old Nokia XpressMusic 5800 phone. I have taken pictures and recorded voice notes that were saved on the card. These are accessible after the card has been removed, which tells me that the problem isn't with the card. The card could also not be locked to the phone as it would at least be detected by a computer and it would be able to write raw data to it with dd, such as /dev/zero. Also, the card is not the Nokia card that came with the phone and I have done nothing that would have caused it to be locked. (I could not find anything on Nokia's website that helps, but then again... my search was not THAT thorough.) The card works on no other device that I have tried so far. I have tried it in my Canon camera (through an adapter), but it refuses to even boot with the card inserted. My card reader (via USB cable and hub) is detected as /dev/sdx with or without the card inserted. When trying to access the card I get an "No medium found". dmesg does not report any change at all when inserting and removing the card. I would obviously like to use my card on other devices - the phone is quite old - and even a likely explanation would help. Thankyou in advance! EDIT 1: I can use the card by connecting the phone to my computer, but this is impractical and would not allow me to use the card in any other device. EDIT 2: The data on the card is not important to me at all.

  Read the article

• How should I configure my Active Directory servers so that if one goes down, users are not kicked off SQL?

  - by Matty Brown

  Today, we shut down one of our Active Directory servers during office hours to check the loading on a UPS. Since all the server did was provide Active Directory in a separate building incase the main building caught fire, or whatever, we didn't think it would have any effect on our users. Seconds after the server was shut down, we had a dozen phone calls from users experiencing this issue:- [Microsoft SQL Server Login] SQLState: '28000' [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed. The login is from an untrusted domain and cannot be used with authentication. Once we realized what had happened, we quickly rebooted the down Active Directory server. Problem solved. But why did this happen. And what if one day a server has a breakdown and is offline for hours, or days? Shouldn't the other Active Directory servers in the domain service authentication requests without disruption to users? We have 3 Windows Server 2003 Standard servers running Active Directory as Domain Controllers with Global Catalogs, all physically located on the same network at Gigabit speeds. I believe the domain was originally Windows Server 2000, or maybe even NT 4.0. Could the issue be to down to old Group Policies inherited from these old server OS's, or some default setting in Active Directory that needs changing?

  Read the article

• Error regarding DNS - "... must be able to resolve names ..." (Windows Server 2008 R2 installation)

  - by Scolytus

  I'm trying to replace our old Windows 2000 Server by a Windows Server 2008 R2. I followed the guide at MSDN. Coming to the step "Install Active Directory Domain Services..." the option to install the DNS-Server was grayed-out. According to Microsoft Support I skipped the DNS Server Installation at this point. (Because of the single-label DNS name) I then installed the DNS-Server role and created a forward-lookup-zone for the domain. When running the Best Practices Analyzer of the DNS-Server role I get these two messages for both domain controllers (the old win2k and the new win 2008 R2): The DNS server [IP address] on [adapter name] must be able to resolve names in the primary DNS domain zone The DNS server [IP address] on [adapter name] must be able to resolve names in the forest root domain name zone The TechCenter articles suggest to use a proper DNS Server - that's pointless when I try to configure a proper DNS Server. How do I configure the DNS Server in a way that it resolves these zones? Or are these errors irrelevant? dcdiag /v /test:DNS Seems to run fine...

  Read the article

• router only assigns small number of IPs

  - by Liam Coates

  Been having a problem with my router for a while now, might just be because it is really old but here's the problem: If a lot of computers are connected to my home network someone will get disconnected. They are assigned IPs and it seems like at a certain point (and I don't know how many) you either get assigned the same IP as someone else or something else is happening and you get disconnected - until i soft reset it and it works again which takes 30 secs. I'd say my tablet, my PC, my sisters iPad, 2 laptops and a netbook is the most that can be connected at one time so that is 6 but that should be fine. The only way I know this is the problem is because I turned on my tablet and I was online on my PC, got disconnected but my tablet was still connected, this is just after i turned the tablet on so I know my router is having difficulty with IPs, it is like it assigned the same IP to the tablet which then clashed with my desktop and knocked me off. I see that sometimes the following solves it as well so I wrote a batch file with a menu to execute these commands as I have to do it so often. ipconfig /release ipconfig /flushdns ipconfig /renew Any ideas? Or shall I just get a new router as this one is old and maybe can't handle giving out that many IPs? Cheers!

  Read the article

• Laptop won't boot with both memory slots used

  - by Johnny W

  I'm currently trying to upgrade my old Sony Vaio VGN-SZ1HP/B to 2GB of RAM. It already had 1GB of Crucial RAM in one of its slots, and one empty. I checked on Crucial.com and it confirms that each bank can hold 1GB of PC2-5300. The 1GB stick already installed was this, but Crucial's page recommended this... The two are identical from what I can make out, so I just ordered another one of the former. Unfortunately the machine refuses to even POST with both sticks installed. If I remove the old RAM from Slot 1 and replace it with the new RAM it runs fine. If I leave Slot 1 empty and put RAM (either stick) in Slot 2, it won't POST. Basically it seems that Slot 2 just isn't working properly. Does anyone have any ideas on how to solve this problem? Or maybe have any experience with this sort of thing with Sony Vaios? Thanks for any help!

  Read the article

• Black Screen on Logon (windows 7 home premium)

  - by Blacknight334

  i have been having some trouble with a dell Xps 15 laptop that i recently purchased. it is under a month old, and a problem has occurred, upon logging on just after start up, the computer will just sit on a black log on screen (with the mouse still visible and active) for a few minutes. it is extremely annoying, especially when im in a rush. the laptop is under a month old. So far, i have tried to update the drivers, all windows update, and still, nothing. also, it doesnt seem to do it when i log into safe mode, or if it does, it will do it for less than 10 seconds, then load the desktop (in normal boot, it usually takes a few minutes). i have also run a number of the inbuilt diagnostics, but found no errors. i want to avoid having to do a system restore for as long as i can. does anyone know anything that can help? (the laptop is running a 500gb SSD, 2gb Nvidia 640m, 8gb ram, 3rd gen i7 quad core with 8 threads) thanks.

  Read the article

• Computer resetting semi-randomly

  - by Peter

  Hi, I'm having a problem with my desktop whereby it sometimes resets itself semi-randomly. For example, I'll switch it on, it'll boot an OS and shortly after getting to the desktop it will immediately reset with no warning. The time isn't consistent - sometimes it does it before reaching login. I'm pretty sure it's not an OS thing; have tried Ubuntu and a Windows install and both exhibit it. It also doesn't appear to be heat-related because sometimes it appears to be able to "get past" it and will then run stably even under load; if anything it seems to be worse from a cold start. My gut feeling is some kind of power issue but I'm clutching at straws a little. Any suggestions on how I could go about testing it or trying to narrow the problem down would be appreciated. The machine is four years old now so while I can replace components if needed, it's not worth enough that I'm comfortable buying new parts without being pretty confident that they'll fix the problem. Thanks in advance for any help :) Edit: Okay, the motherboard is a MSI K8N SLI; CPU is an Athlon64 X2 4200+. Has one video card, a GeForce 7800GT. 1GB RAM, not sure of brand; 3 hard drives, two SATA and one PATA. Flashed motherboard to latest BIOS some time ago. Edit the Second: I thought I'd narrowed it down to the PSU for a while, but then it recurred again. I ended up pulling everything out but CPU, RAM and motherboard and it still seems to be stuffed (if anything, it's gotten worse in the last couple of days). I assume it's one of those three components, but the machine is old enough that I don't really want to spend money replacing any of them. So thanks for everyone's suggestions; much appreciated!

  Read the article

• PC shut downs automatically after 10-20 second. No POST screen, no beeps

  - by emzero

  I have this not-so-old computer that's not being used for a year or so. Specs: Motherboard: ASUS PN5-E SLI CPU: Intel Core2Duo E4300 RAM:2x2GB SuperTalent DDR2-800 VGA: Zogis GeForce 7950GT PSU: Vitsuba San-55-S 550w HD: No hardrives yet When I power on the computer, everything seem to start, but right away the whole system shuts down. I've removed and changed the RAM sticks, take out the VGA, everything I could think of. So what could it be causing this? The PSU? The motherboard is dead? The CPU? Any help to isolate the problem will be useful. Thanks PS: Please don't close the question, this could be helpful to anybody having a similar problem, even with different hardware. UPDATE I've removed the old thermal paste and apply a brand new one. I also cleaned every dust using a high pressure gas dust remover. Checked for bad capacitors, all of them seem ok. Opened the PSU, removed big giant dust balls, cleaned with high pressure dust remover. Still the same problem, but now it stays powered on for almost 20 seconds maybe. But no POST screen, no beeps at all, nothing. So I suspect it's a motherboard or PSU failure. Unfortunately I don't have an energy tester to test the PSU... Don't know what else to try. I don't have another 775-motherboard to test the CPU, RAM and VGA with it.

  Read the article

• How can I make Internet Explorer 6 render Web pages like Internet Explorer 11?

  - by gparyani

  Now, I know that this may seem like a bad question in that I can just upgrade to Internet Explorer 8, but I am sticking with IE6 in that IE8 removes valuable features, like the ability to save favorites offline and the fact that a file path turns into a Windows Explorer window and typing a Web address into Windows Explorer changes it into an IE window. I know that Internet Explorer 6 does a really bad job at rendering some pages. I know of the Google Chrome Frame extension that brings Chrome-style rendering into IE, but that will soon be discontinued. So, I tried another thing: I know that C:\Windows\System32\mshtml.dll contains the Trident rendering engine that is used by IE, so I tried something: I first backed up the original file by renaming it on Windows XP to mshtml-old.dll, then I tried to copy in the DLL from a computer running Windows 7 with Internet Explorer 10. I noticed that, after copying, the system had replaced the new DLL with the old one, but left the one I backed up intact. Is there any way I can get the system to not replace the DLL like that so that I can transfer in IE11's mshtml.dll into Windows XP and make IE6 render like IE11? I'm looking for an answer that describes how to tweak my system to make IE6 render like IE11 (or IE10), not one that tells me to upgrade IE or install another browser. I don't care how tedious the method is, just as long as it works.

  Read the article

• Orphan IBM JVM process

  - by Nicholas Key

  Hi people, I have this issue about orphan IBM JVM process being created in the process tree: For example: C:\Program Files\IBM\WebSphere\AppServer\bin>wsadmin -lang jython -f "C:\Hello.py" Hello.py has the simple implementation: import time i = 0 while (1): i = i + 1 print "Hello World " + str(i) time.sleep(3.0) My machine has such JVM information: C:\Program Files\WebSphere\java\bin>java -verbose:sizes -version -Xmca32K RAM class segment increment -Xmco128K ROM class segment increment -Xmns0K initial new space size -Xmnx0K maximum new space size -Xms4M initial memory size -Xmos4M initial old space size -Xmox1624995K maximum old space size -Xmx1624995K memory maximum -Xmr16K remembered set size -Xlp4K large page size available large page sizes: 4K 4M -Xmso256K operating system thread stack size -Xiss2K java thread stack initial size -Xssi16K java thread stack increment -Xss256K java thread stack maximum size java version "1.6.0" Java(TM) SE Runtime Environment (build pwi3260sr6ifix-20091015_01(SR6+152211+155930+156106)) IBM J9 VM (build 2.4, JRE 1.6.0 IBM J9 2.4 Windows Server 2003 x86-32 jvmwi3260sr6-20091001_43491 (JIT enabled, AOT enabled) J9VM - 20091001_043491 JIT - r9_20090902_1330ifx1 GC - 20090817_AA) JCL - 20091006_01 While the program is running, I tried to kill it and subsequently I found an orphan IBM JVM process in the process tree. Is there a way to fix this issue? Why is there an orphan process in the first place? Is there something wrong with my code? I really don't believe that my simplistic code is wrongly implemented. Any suggestions?

  Read the article

• Update BIOS on Sun Fire X4150 server

  - by Massimo

  I have some Sun Fire X4150 servers with a very old BIOS release (1ADQW015), which seems to have some compatibility problems with WMware ESX Server 3.5 and Windows 2008 R2 virtual machines; so I want to update the BIOS on them. The problem: according to this page, if your servers run ELOM (mine do), you first need to update to the latest ELOM release, then to the interim transition release, then finally you can update to the latest one. Ok, I'm willing to do that... but it looks like Sun (now Oracle) will happily let you download the latest firmware DVD (3.3.0), but it will not let you download the transition release (2.0) if you don't have a support contract. Well, I actuall don't care at all about the servers' management controllers (we don't even use them), so upgrading from ELOM to ILOM is totally irrelevant to me; but I need to update the servers' BIOS. So my question is: can I update the servers' BIOS to the latest version without doing the full ELOM-to-ILOM migration, or will this not work (or even make the servers unusable)? Do BIOS versions and SP ones need to be matched, or can one be updated without bothering with the other? Bonus question: if this whole ELOM-to-ILOM thing actually is needed in order to update the BIOS, can that 2.0 CD-ROM be obtained without having a support contract with Sun/Oracle (which we are definitely not going to sign, being that quite old hardware)? Update: I tried upgrading only the BIOS on one of the servers, and it didn't boot anymore. So it really looks like a full firmware upgrade is needed, and the management controller and BIOS versions should be kept in sync. So... where can I find that *&!£%$% 2.0 CD-ROM? Or at least the transition firmware that can be found on it?

  Read the article

• Real benefits of tcp TIME-WAIT and implications in production environment

  - by user64204

  SOME THEORY I've been doing some reading on tcp TIME-WAIT (here and there) and what I read is that it's a value set to 2 x MSL (maximum segment life) which keeps a connection in the "connection table" for a while to guarantee that, "before your allowed to create a connection with the same tuple, all the packets belonging to previous incarnations of that tuple will be dead". Since segments received (apart from SYN under specific circumstances) while a connection is either in TIME-WAIT or no longer existing would be discarded, why not close the connection right away? Q1: Is it because there is less processing involved in dealing with segments from old connections and less processing to create a new connection on the same tuple when in TIME-WAIT (i.e. are there performance benefits)? If the above explanation doesn't stand, the only reason I see the TIME-WAIT being useful would be if a client sends a SYN for a connection before it sends remaining segments for an old connection on the same tuple in which case the receiver would re-open the connection but then get bad segments and and would have to terminate it. Q2: Is this analysis correct? Q3: Are there other benefits to using TIME-WAIT? SOME PRACTICE I've been looking at the munin graphs on a production server that I administrate. Here is one: As you can see there are more connections in TIME-WAIT than ESTABLISHED, around twice as many most of the time, on some occasions four times as many. Q4: Does this have an impact on performance? Q5: If so, is it wise/recommended to reduce the TIME-WAIT value (and what to)? Q6: Is this ratio of TIME-WAIT / ESTABLISHED connections normal? Could this be related to malicious connection attempts?

  Read the article

• Why is my second monitor not working?

  - by StampedeXV

  Since I have my new computer, I have a very weird problem. Facts: New Computer: Motherboard: ASRock Z77 Pro 3 Graphics-card: Asus1GB D5 X EN GTX560 DCII OC/2DI R CPU: Intel i5-3570 Windows 7 64bit 500W beQuiet special edition (92% efficiency) 8GB 1333MHz DDR3 Corsair RAM (CL9) Scythe Mugen 2 2 magnetic HDDs + 1 SDD 1 DVD-R Old Computer: Motherboard: Asus P55 something Graphics-card: Asus1GB D5 X EN GTX560 DCII OC/2DI R CPU: Intel i7-870 Windows 7 64bit 550W Corsair 8GB 1333MHz DDR3 Corsair RAM (CL9) Scythe Mugen 3 2 magnetic HDDs + 1 SDD 1 DVD-R On the old computer it worked fine with two monitors. Moving to the new (I took the same Graphics-card) it only works with one. The weird thing I mentioned is: not matter which one. But if I put both there, only one is available. There is no reaction at the start (where normally (at least if I remember correctly) the monitor shortly went from "standby" to "on"). Windows does not recognize a second monitor in the Device Manager. I have the latest drivers for Motherboard and Graphics-card. I have the latest BIOS drivers. I am out of ideas. Edit: completed computer setup

  Read the article

< Previous Page | 761 762 763 764 765 766 767 768 769 770 771 772  | Next Page >