Search Results

Search found 34556 results on 1383 pages for 'setting as default'.

Page 765/1383 | < Previous Page | 761 762 763 764 765 766 767 768 769 770 771 772  | Next Page >

• How can I disable DPMS temporarily in X under a modern linux?

  - by wrt

  Historically if you wanted to control blanking and DPMS in X, you could do it with xset. Issuingxset -dpms on my laptop results in xset q returning "DPMS is Disabled", as it should. But my screens still turn off. I'm running an up-to-date Arch Linux using KMS with integrated Intel graphics, I'm not running GNOME or willing to use anything that needs something like it. I am however stuck with DBUS and HAL. I've tried fiddling with the various timeouts, and it hasn't helped - specifically, changing the timeouts seems to be able to turn off the screen sooner, but not stop it from turning off :) This makes me suspect that there's something else overriding the setting. Is there any way to get xset to actually function as it used to, or at least stop lying to me? Note that I don't want to permanently disable DPMS or blanking - just to be able to control it when I need to.

  Read the article

• MVC Scaffold Template Not Generating?

  - by monkey9987

  Been working on an MVC project and my templates were not generating. I first created my Model inside my "Models" folder, then did a quick compile. Next I went to the Views folder to get it created, right click and say "Add View" then I clicked the checkbox to create an edit page. What happened was the template would never seem to pull in my Model, it would just have the default header items, but the entire model was missing.  My model was defined as follows: public class LogOnModel { [Required][Display(Name = "User name")]public string UserName;[Required][DataType(DataType.Password)][Display(Name = "Password")]public string Password;[Display(Name = "Remember me?")]public bool RememberMe; } See anything wrong with that? I couldn't figure out why each time I created my View and selected the option to create the "Edit" scaffold automatically, it would come up blank. Turns out I'm missing my get / set methods on the Model class items. Here's my code with the correct setup: public class LogOnModel { [Required][Display(Name = "User name")]public string UserName { get; set; } [Required][DataType(DataType.Password)][Display(Name = "Password")]public string Password { get; set; }[Display(Name = "Remember me?")]public bool RememberMe { get; set; } }  I hope that helps someone out, it's pretty simple when I look at it now, but that's always the case!  ~ Steve

  Read the article

• Upgrade to 0.25, files served to uPNP devices cannot play

  - by David Buttrick

  I have a Sony BDP-S390 bluray & network player. I upgraded my Myth server to 0.25. When I browse to the Myth server, and try to play a recording, I get an error message about the file not being payable in the player. Interestingly, the files that i have recorded, and the videos that I have loaded into my Video volume group are .mpg or .mp4. The player shows the filetype that it thinks the file is in it's list, and it claims that these files are AVI files, however none of them are. They are all .mp4 or .mpg files. Thinking that that was just an optical illusion, I went ahead and tried to play a file, but I get an error about the file not being playable. First of all, is there something that I need to do to make the uPNP server know about different filetypes? Is it reporting AVI because it hasn't been told about MPG or MP4? Second, I'd like to help out some more here and collect some logging about the uPNP server in the myth server. I cant seem to find information on how to turn on logging, and there is no mythbackend settings file int /etc/default. Thanks very much.

  Read the article

• Skype 2.1beta for Linux and sound quality

  - by vava

  I've been using Skype 2.1beta for Linux with my bluetooth headset and quality of the sound is just awful. But not always though, if I call echo service, quality is acceptable, but when I call real people there's echo, sound is crippling, there's pauses, voice is unrecognizable, all sorts of quality problems in one call. If I use newest Skype under WIndows with the same headset to call to the same people, quality is more than normal. So, is there some settings I can tweak, like tell Skype which codec to use or maybe there's noise cancellation plugin for PulseAudio I can use or any other system setting I can try to play with?

  Read the article

• OpenSSH SFTP server with chroot() + File Permissions

  - by HannesFostie

  I am currently setting up an SFTP server but there is one detail I can't seem to figure out. When I add a user, I would like him to connect using his client and be able to write in his "root dir" right away. My Match case for the SFTP-users group currently has ChrootDirectory set as "/home/%u", and inside that directory I have to have a subdirectory owned by the user, while /home/%u itself is owned by root. Next to that, the "root dir" also has a couple files, .bashrc to name one. Is it possible to put these files somewhere else, remove them, or at least make them invisible to the user? Thanks EDIT: One more little thing I'd like to implement is for one account to have read (or rw, not sure yet) access to all other users' home directories. What is the easiest way to implement this?

  Read the article

• How Can I Not Show the Green Download Progress Display for Google Chrome in the Windows Taskbar?

  - by theMaxx

  I use Windows 7 and when downloading with Google Chrome the icon in the taskbar has a partially green background that indicates the download progress. Is there a way to not show this green status indicator in the Windows taskbar? I find it distracting when I am working. It seems there is no option to disable it. I do not want to hide the icon entirely but rather just not show the green background. Is this possible? I have searched for an option or setting to change this but there seems to be surprisingly little information about this on the internet. I imagine that others would also appreciate it if there is some solution for this. Thanks.

  Read the article

• Ditch cPanel / WHM in favour of manual seup

  - by BWRic

  We currently use cPanel / WHM on a reseller account but are looking at getting a dedicated server. My first thought was to duplicate this set up on the dedicated box to allow us to quickly create new accounts. I'll be a managed server so they'll have set up the LAMP stack. I'm curious if I actually need cPanel and WHM. We don't use many of the features from cPanel / WHM, just creating accounts and databases, clients do not have FTP access. I'm no sys admin and come from a Windows / GUI background but have some knowledge in setting up development servers. WHM: Creating accounts I presume this sets up the Apache virtual host, FTP access and DNS settings. I've some knowledge of editing the Apache files to create virtual hosts. Am I correct in thinking as long as the DNS is pointing to the server IP and the virtual host is configured the server can serve the (php) pages? I'm not sure I need per site FTP access as only we will have access so I could have a server wide/htdocs only access to view all the site. The company who supply the dedicated hosts would also provide the own DNS management tool so I'm not need to cPanel one. MySQL: Creating users and databases We use cPanel to create the MySQL users and databases. As it's a dedicated box and I can have root access I think this could be replaced by SQLyog for db management and phpMyAdmin for user management. Do you I need cPanel or can I get by editing a few text files for creating the accounts, then use the MySQL tools for databases? Or am I missing something major with how the sites are configured?

  Read the article

• Botting from a stick drive

  - by Zap

  Am trying to boot from a usb stick. Have carefully followed the instructions at the following link and successfully downloaded and installed version Ubuntu 12.04 desk top: http://www.ubuntu.com/download/help/create-a-usb-stick-on-windows I used the Universal-USB-Installer-1.9.0.2 as instructed and choose the "Ubuntu 12.04 desk top" option, after downloading the respective iso/zip file onto my Dell laptop from the Ubuntu site. Also modified my bios to select the usb first as boot drive instead of hard drive. Also, turned off bit blocker on my laptop and usb stick. Usb stick has the setting of "Automatically unlock this drive on this computer". When i reboot my laptop, it first boots into a black screen (i assume is the bios), but prompts saying "Remove disks or other media. Press any key to start". I press any key and regardless the laptop boots up to windows. Hence, it appears that the boot process is checking the USB first before going to the hard drive to look for it's boot disk and starting Windows 7. Is it that the USB stick is not correctly configured with Ubuntu as a boot disk? Is there anything else that i need to do besides the instructions at the following link? http://www.ubuntu.com/download/help/create-a-usb-stick-on-windows How can I ensure that USB boot stick is configured correctly? After running the Universal-USB-Installer-1.9.0.2 to "install" Ubuntu, is there additional configuration/installation steps? What is the first file that the bios would look for on this USB drive? Is this configured somewhere in the bios, or would it just look for an grub file or /boot dir? The only message i get when booting is "Remove disks or other media. Press any key to start". Any and all help would be much appreciated.. Thanks ... :)

  Read the article

• Office Communicator starts up automatically even though I disabled it

  - by chiccodoro

  The title says it all: I am trying desperately to keep OCS from starting automatically when I log in to Windows. The first and only thing I did was unchecking the "Automatically start Communicator when I log on to Windows" option. I can verify that it is still disabled, but OCS ignores that and starts up as soon as I log on to Windows. There is no OCS in the "Startup" folder, and the registry setting "AutoRunWhenLogonToWindows" at HKEY_CURRENT_USER\Software\Microsoft\Communicator is set to 0x00000000. I am using Office Communicator 2007 R2 on a Windows 7 with Microsoft Office 2010.

  Read the article

• International Dvorak keyboard doesn't trigger hot-keys

  - by akurtser

  I'm using the Engilsh-Dvorak keyboard-layout; My second keyboard language is Hebrew, which has nothing to do with Dvorak but the hot keys (e.g if I'm writing a document in Hebrew and want to make some bold text using Ctrl+b). The default Hebrew keyboard that comes with Windows (7 and below) has a shift mode which matches each Hebrew character with its matching English QWERTY character ). Obviously I'd want to use the Dvorak corresponding key rather than the QWERTY one, so I created a Hebrew-Dvorak keyboard with a software called Keyboard Layout Manager (KLM) which creates new keyboard layouts DLLs. It works just fine for the shift key, however, Ctrl-key triggered hot-keys (e.g Ctrl+l in FF) are being matched to the corresponding QWERTY key. I've examined the properly working English-Dvorak layout using KLM and in it's "Ctrl+ pressed" view, there isn't any character that's matched to any key but still I tried to encode the Hebrew Ctrl+ pressed keys to work with their matching Dvorak keys, yet it had no effect.

  Read the article

• How do I configure NTLM authentication in Firefox on Linux?

  - by tolomea

  Our IT department have NTLM deployed through the intranet servers. I've set network.automatic-ntlm-auth.trusted-uris value in Firefox on some of the Windows machines and that works fine. However setting it in Firefox on the Linux machines is not working. This doesn't surprise me at all, I've no notion of where Firefox on Linux is supposed to get the authentication details from. So how is this process supposed to work? what bits of config / infrastructure am I missing?

  Read the article

• How to disable VGA on new server... reversibly?

  - by Javawag

  Strange question here. I have a server with 1GB of RAM, however when booted this shows as 768MB. I've discovered the reason for it – and that is that it has an unboard graphics card which shares memory with main RAM. Running Ubuntu Server, it doesn't actually ever use anything graphical – it's all set up to be SSH'd into and therefore there's no need to use the VGA. I believe there may be a setting to switch off VGA/graphics card in BIOS, but my question to you guys is: is this recommended? and if I turn it off, then how would I turn it back on again in BIOS (given that with it off, I wouldn't be able to see the option to turn it on as there would be no graphics output!!)?

  Read the article

• How to force Windows 7 to ask for a "fresh" IP address from DHCP server?

  - by haimg

  I'm troubleshooting a certain issue with my DHCP configuration, and need my Windows machine to ask for a "fresh" IP address, so I can see which address DHCP server gives by default. When I do ipconfig /release followed by ipconfig /renew, Windows "proposes" its old IP address to the DHCP server (just checked with Wireshark, initial "DHCP Discover" message has Option-50 (requested IP address) with Windows machine's old IP). Tried disabling/enabling network adapter. Same behavior. Question: How can I force Windows to just ask for a new IP address, without proposing its old IP address.

  Read the article

• Install lubuntu on an old Dell c600 : Video issues

  - by maniat1k

  I am trying to install lubuntu on an old laptop. I use the 386 alternate instalation of it, because it has only 256mb ... All when ok so when I start up the lubuntu the screen splits between 1024x768 and 800x600... its very horrible to use =). Ok I do this: lspci and found an ATI Rage mobility M3. So I tryied the old xorg way to edit the missing resolution: Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Rage Mobility M3 (AGP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection on an brand new xorg.conf... Do an init 6 to see if X take the changes, but nothing habbened: also tryed to do pkg-reconfigure -changedir /etc/X11 (where I created the new xorg.conf) and nothing.. removed the X conf from /tmp.. also do sudo apt-get update / upgrade... and no luck... Anyone can help me and tell me how to reconfigure X with the terminal? Can anyone give me a hand?

  Read the article

• Only One GPU Detected in the Nvidia Quadro NVS 450

  - by Kyle Brandt

  I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

  Read the article

• sql server log shipping

  - by voam

  I am setting up log shipping with two 2008 sql servers connecting with a vpn. As far as I know as long as the sql agent is able to access the share on the primary/secondary servers everything will work. When I set up the Log shipping on the primary server using SQL Mangagement Studio, before I can set any of the "Secondary Database Settings" it asks me to connect to the secondary server. But I really don't want to open up the connection to the secondary server. I will be initialing this secondary database with a backup so as long as the transaction logs get copies everything should work. How to I work around the GUI not enabling any of the settings for the secondary server until I actually connect to it? Thanks in advance!

  Read the article

• Field symbol and Data reference in SAP-ABAP

  - by PDP-21

  If we compare field symbol and data refernece with that of the pointer in C i concluded that :- In C language, Say we declare a variable "var" type "Integer" with default value "5". The variable "var" will be stored some where in the memory and say the memory address which holds this variable is "1000". Now we define a pointer "ptr" and this pointer is assigned to our variable. So, "&ptr" will be "1000" and " *ptr " will be 5. Lets comapre the above situation in SAP ABAP. Here we declare a Field symbol "FS" and assign that to the variable "var". Now my question is what "FS" holds ? I have searched this rigorously in the internet but found out many ABAP consultants have the opinion that FS holds the address of the variable i.e. 1000. But that is wrong. While debugging i found out that fs holds only 5. So fs (in ABAP) is equivalent to *ptr (in C). Please correct me if my understanding is wrong. Now lets declare a data reference "dref" and another filed symbol "fsym" and after creating the data reference we assign the same to field symbol . Now we can do operations on this field symbol. So the difference between data refernec and field symbol is :- in case of field symbol first we will declare a variable and assign it to a field symbol. in case of data reference first we craete a data reference and then assign that to field symbol. Then what is the use of data reference? The same functionality we can achive through field symbol also.

  Read the article

• Will disabling NAT on my wireless router cause a performance hit on my DSL router?

  - by user117313

  I have a Thomson TG508v2 router/modem and a brand new AirPort Extreme connected to it. At first, I set the AirPort Extreme to "share a public IP", which enables DHCP/NAT. Everything works great but I was having the Double NAT error. So I set the AirPort Extreme as bridge mode, which disables DHCP/NAT and let my crappy modem handle my internal network IPs. Will this cause any performance hit in my network? I'm worried because I'll outsource this job from AirPort Extreme (premium hardware) to the crappy modem. Before you suggest, I tried setting my modem as a bridge and configuring PPPoE on the AirPort Extreme, however it wouldn't connect to the internet, so I just dismissed leaving the modem as bridge.

  Read the article

• Hyper-V Manager version 6.2, an experience in virtual switch setup

  - by Kevin Shyr

  The version number of Hyper-V manager is 6.2.9200.16384   This is what came with my Windows 8 work laptop (by enabling Windows features) The blogs I read indicated that I need an external switch for my guest OS to access internet, and an internal one for them to share folder with my Host OS.  I proceeded to create an external virtual switch, and here is the screenshot. After setting up the network adapters on the guest OS, I peeked into host OS networking, and saw that Network Bridge was already created.  GREAT!  So I fired up my guest OS and darn, no internet.  Then I noticed that my host internet was gone, too.  I looked further and found that even though I have a network bridge, no connection has the status "Bridged"Once I removed the bridge (by removing individual connection from the bridge, I know, weird, since none of them say "Bridged" in status)  I re-selected the connection that I want and add them to the bridge to create a new network bridge.  Once my wireless connection status shows "Bridged", I was able to get to internet from my guest OS.Two things I noticed after I got internet for everyone ( my host and guest OS):My network adapters in the host OS no longer shows "Bridged", but everyone can still get to the internetThe virtual switch that I set up for "External" is now showing to be "Internal", and I was able to create shared folder between host and guest OS.  This means I didn't have to create the other "Internal" virtual switch.

  Read the article

• How to create a separated network to customers only?

  - by Valter Henrique

  I work in a company where we have a network ethernet and wi-fi, we would like to create a network where our customers could access our network but don't have access to our computer network. This access would be internet only, nothing more. The customers will not see our computers and the files that we share in our network. I have two routers, how can I do this ? A Cisco Linksys Wireless-N Broadband Router WRT160N V3 and a Netgear Wireless G Router WGR614 v9 and about firewalls there´s only windows firewalls in each computer by default.

  Read the article

• Ubuntu 64bit Black Screen on Minecraft

  - by Signify

  I have tried posting on the forums, but I really need help (I'm a server admin and really don't want to have to switch to Windows just to run Minecraft). Anyhow, I originally was running openjdk6 as I was told that 7 was unstable and was getting periodical lag spikes while walking (at least once every 3 seconds the screen would freeze for a tenth of a second). After that, I attempted to install Sun's Java JDK7 (I couldn't get ahold of 6 without signing up for Oracle's newsletters). Upon attempting to run Minecraft, I got a black screen after logging in with this error message: 27 achievements 182 recipes Setting user: Thunder7102, -1618112820878091307 Exception in thread "Minecraft main thread" java.lang.UnsatisfiedLinkError: /home/noiro/.minecraft/bin/natives/liblwjgl.so: /home/noiro/.minecraft/bin/natives/liblwjgl.so: wrong ELF class: ELFCLASS32 (Possible cause: architecture word width mismatch) at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1939) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1864) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825) at java.lang.Runtime.load0(Runtime.java:792) at java.lang.System.load(System.java:1059) at org.lwjgl.Sys$1.run(Sys.java:69) at java.security.AccessController.doPrivileged(Native Method) at org.lwjgl.Sys.doLoadLibrary(Sys.java:65) at org.lwjgl.Sys.loadLibrary(Sys.java:81) at org.lwjgl.Sys.<clinit>(Sys.java:98) at org.lwjgl.opengl.Display.<clinit>(Display.java:132) at net.minecraft.client.Minecraft.a(SourceFile:184) at net.minecraft.client.Minecraft.run(SourceFile:657) at java.lang.Thread.run(Thread.java:722) Now, this got me fed up, so I tried to install a Windows 7 virtual machine through virtualbox, I gave it 256mb of graphics memory with 2D and 3D acceleration and 3GB of RAM. I installed Java JDK7 for Windows (which does work from experience on my other Windows 7 partition). Once again, a black screen after login. What the heck is going on guys? My System Specs: Ubuntu 12.04 64bit Fully Updated running Gnome3 Nvidia GTS 450 1.3GB OC'd AMD Athlon II 4x 2.8Ghz 6GB of RAM So, what do you think?

  Read the article

• Any way to disable specific CPU sleep modes?

  - by Philippe

  I just got a new Toshiba Tecra S11 notebook, which has a Core i5 520M CPU, and it appears to suffer from a well-known problem: a high pitched noise when the CPU is idle. Googling around revealed that this is caused by a specific power-saving mode in the CPU. In most cases, C4 mode is blamed for the noise. So my question is: is it possible to disable C4 mode (or any other "sleep" mode) using some utility or BIOS setting? I don't mind if it hurts battery life. I'd appreciate any advice on this matter. It's driving me crazy.

  Read the article

• Should You Delete Windows 7 Service Pack Backup Files to Save Space?

  - by The Geek

  After you install the Windows 7 Service Pack 1 that we mentioned yesterday, you might be wondering how to reclaim some of the lost drive space—which we’ll show you how today—but should you actually do it? Note: If you haven’t installed the new SP1 release yet, be sure to read our post explaining what it entails before you do. Spoiler: it’s mostly bugfixes. Latest Features How-To Geek ETC Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) Read On Phone Pushes Data from Your Desktop to the Appropriate Android App MetroTwit is a Sleek Native Twitter Client for Your Windows System Make Efficient Use of Tab Bar Space by Customizing Tab Width in Firefox See the Geeky Work Done Behind the Scenes to Add Sounds to Movies [Video] Use a Crayon to Enhance Engraved Lettering on Electronics Adult Swim Brings Their Programming Lineup to iOS Devices

  Read the article

• How does MySQL 5.5 and InnoDB on Linux use RAM?

  - by Loren

  Does MySQL 5.5 InnoDB keep indexes in memory and tables on disk? Does it ever do it's own in-memory caching of part or whole tables? Or does it completely rely on the OS page cache (I'm guessing that it does since Facebook's SSD cache that was built for MySQL was done at the OS-level: https://github.com/facebook/flashcache/)? Does Linux by default use all of the available RAM for the page cache? So if RAM size exceeds table size + memory used by processes, then when MySQL server starts and reads the whole table for the first time it will be from disk, and from that point on the whole table is in RAM? So using Alchemy Database (SQL on top of Redis, everything always in RAM: http://code.google.com/p/alchemydatabase/) shouldn't be much faster than MySQL, given the same size RAM and database?

  Read the article

• Enable roaming profile from group policy

  - by Rob Nicholson

  I've had a reasonable look around the AD policies but am I right in saying the only place that you can enable & define the group policy location is by editing the user, i.e. there isn't a group policy setting to (say) "Set the profile location to \myserver\users\%username%\profile" for all users in group XYZ? I suspect this might be because of chicken & egg, i.e. group policy is applied after the profile has been loaded and therefore can't specify the location. Cheers, Rob.

  Read the article

< Previous Page | 761 762 763 764 765 766 767 768 769 770 771 772  | Next Page >