Search Results

Search found 2630 results on 106 pages for 'abood mount'.

Page 77/106 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

• Installing Linux kernel 2.6.25.14 on RHEL 5.4

  - by aaron

  I have to install Linux kernel version 2.5.25.14 on a RHEL 5.4 server because of drive compatibility issues. I follow the RedHat "Building a Custom Kernel" instructions running the following: $ make mrproper $ make xconfig $ make clean $ make bzImage $ make modules $ make modules_install $ make install But I get a bunch of warnings like this: WARNING: No module ehci-hcd found for kernel 2.6.25.24, continuing anyway When I try to boot this kernel it is unable to mount the hard drive, and kernel panics on startup. As far as I can tell I'm using a standard configuration (I just accept the defaults and save a .config file). Is there something I'm missing? Thanks.

  Read the article

• How to stop scheduled chkdisk on windows 7?

  - by AndrejaKo

  Hi! I have a problem with windows 7 64-bit. I was trying out chkdsk command line options and scheduled a chddsk /r on next start. After that I disassembled the laptop on which I set the chkdsk. After I reassembled it, windows gets normally to the point where it should start the check and then hangs when the countdown reaches 1 second. During the countdown, it doesn't detect any input from keyboard. At first I thought that I didn't correctly install the keyboard, but under GNU/Linux, everything is working fine and I can normally mount the windows partition . So is there any way to stop the scheduled chkdsk? I really don't feel like reinstalling windows again because I just finished setting up my tool-chain the way I like it and compiled about 6GiB worth of dependencies I need for some project I'm working on.

  Read the article

• Lightweight Live Linux Image

  - by MA1

  I am working on an application which is being developed in wxPython and C plus using linux core utilities and network support. To be more specific, I only need the following support for following packages/softwares/components. wxPython C Network Support Linux Utilities Vi File System(fdisk/parted, ntfsprogs etc) Basic(cp, mount/umount, mkdir etc) The application will run from a live CD. Currently i am using Fedora 12 with Gnome for live CD. Currently the size of live image is around 350 MB. The size of application is hardly 1 MB. I don't need anything else except above mentioned. Just my application and supporting packages, no desktop etc. So, I need a Lightweight Linux image as smaller as possible providing all the above mentioned packages/components. I am considering the following distributions: Xfce LXDE Fluxbox Enlightenment Any ideas/suggestions?

  Read the article

• How to automatically show USB camera or memory stick contents in Icewm?

  - by darenw

  I normally use a very lightweight Linux setup. No desktop like Gnome or KDE, just Icewm as the windows manager and nothing else that normal users might consider essential. Well, I do need a file manager - I use Thunar. Recently I've been trying Gnome. Whenever I shove a memory stick into a USB port, or connect my digital camera, it can automatically pop up a file manager showing all the goodies on that device. KDE does this too. I like this. Although quick at the command line, I like not having to go sudo to mount the device and all that. If I want to stick with a lightweight setup using Icewm+Thunar, is there something non-huge I can install to make external devices fire up a Thunar window, or otherwise make access to the contents brainlessly easy?

  Read the article

• Why can't windows see mmcblk0p3? [closed]

  - by jacknad

  The partition is created on the embedded linux target like this # n - new # p - partition # 3 - partition 3 # 66 - starting cylinder # <blank> - maximum size for the ending cylinder # t - set file system type # 3 - partition 3 # c - set to windows vfat # w - write partition table and exit echo -e "n\np\n3\n66\n\nt\n3\nc\nw" | fdisk /dev/mmcblk0 The file system is then formatted on the embedded linux target as MS-DOS like this # -n volume-name # -F FAT-size mkfs.vfat -n DB -F 32 /dev/mmcblk0p3 A linux host can mount and access files in mmcblk0p3 without issue. Why can't windows? Edit: Although the default number of FATS is 2 I tried adding -f 2 [number-of-FATs] since this is actually being done by busybox on an embedded platform but this didn't help. I understand the Linux MS-DOS file system does not support more than 2 FATs but there are only 2 on this target (the boot is also FAT which is visible), along with and EXT3 (on p2) for the root file system.

  Read the article

• How can I create an encrypted, bootable thumbdrive containing Linux?

  - by Hanno Fietz

  I want to have a bootable flash drive that's fully encrypted. I have not tested, but seem to like, TrueCrypt, which provides a fully encrypted system and has lots of other features I like (for instance, hidden volumes). Unfortunately, it seems, system encryption is only supported for Windows, although I'm not sure why. The crux here, I guess, is that you need a boot loader that is capable of asking for your password and decrypt the disk, at least the part that contains kernel and initrd. An alternative might be to have an unencrypted boot partition containing a more powerful system which will decrypt and mount the main partition. However, this brings up the question of whether you're introducing data leaks. Depending on the specific scenario, I may lack the experience to assess if this is a problem. So I'd strongly prefer a fully encrypted disk or a similarly straightforward alternative.

  Read the article

• Qnap won't connect to Windows Share

  - by thetrashcan

  I have a qnap nmp-1000 in my network and would like to stream my films from my win7 laptop to the nmap-1000 device. I just managed to do so with upnp sharing, but I would like to, for security reasons, share my files over a shared folder which is password protected. My problem is when I'm searching for devices on my network with the qnap then it won't find any. When I try to mount a remote disk on my qnap it will just fail with an connection failed message. But when I try to connect to the qnap device with my laptop, it does this succesfully. Can someone guide me through on how to get my setup working?

  Read the article

• Upgrade to ubuntu 13.04 from 12.04 with iso image

  - by Digvijay Yadav

  I have ubuntu 12.04 installed on my system. I want to upgrade it to ubuntu 13.04. I want to do this upgrade using an iso image of ubuntu 13.04. I tried this Solution But it didn't work for me. After running these command I didn't get any alerts about updating. Also I don't understand the gksu part of the solution. Here are the steps I tried: sudo mount -t iso9660 -o loop PATH/TO/ISO /cdrom then sudo /cdrom/cdromupgrade Read more: http://linuxpoison.blogspot.tw/2011/06/how-to-upgrade-ubuntu-using-alternate.html#ixzz2SFMqlOPx I also wanted to know, If I can do this using a networked computer. By this I mean the iso file is on some other computer. Thank you.

  Read the article

• Kubuntu Monitor Out of Range

  - by uncleo

  My X server seems to be faulty, but I don't know why. I had some problems last week with a new motherboard, but they seemed to be resolved. Today, I updated Kubuntu and restarted, but my Viewsonic VX900 LCD monitor shows the splash screen for several seconds, then displays the message "Out of Range" I have tried various kernels in Grub, some in recovery mode, most do the same thing. No key combinations bring up a shell prompt like I expect. The one exception was a very old kernel, that would only mount the file system as read-only, so I can't fix up the xorg.conf file. Is there anything to be done?

  Read the article

• Using TrueCrypt with File Replication on Windows Server

  - by neildeadman

  We have a few folders that are set to replicate to a DR file server off-site. One of these folders contains a file that is a TrueCrypt volume container. When this file is mounted in TrueCrypt, the file won't replicate (fair enough!). I'm looking at alternatives to improve this situation. One solution I currently have is to have a scheduled task to unmount the volume and then every morning as the volume is needed, have someone mount it. This is a pain slightly because the password is known by a few people (I'm not one and neither are my colleagues who would be performing the mounting operation) so we'd need to continually get them to come over and type it in. The other I had was to have one TrueCrypt container on each server and replicate the contents when they are mounted. I wasn't able to get TrueCrypt to see the mounted volume so I guess this is a no go. Any other solutions I have missed or a fix for the above?

  Read the article

• LUNS access issue in ESX4 Cluster server

  - by rmustafa

  HI, I've created volumes in equallogic in PS 6000 XV(having 2 member which is in 1 pool), checked & those volumes can be easily detected my ISCSI software in windows. But the problem with ESX , not able to see the assigned disk on ESX server, I can explain what I've done: 1.Created Cluster with enabled HA & DRS 2.Added 3 ESX4 HOST 3.Added VMkernel & configured in all 3 ESX4, enabled vmotion & FT on the same adapter. 4.went to iSCSI storage adapter properties, enabled iSCSI 5.Trying to discover the available storage with the controller IP on dynamic discovery, but not able to see the assigned storage Note: the same volume is accessed to windows that means there is no issue from storage , am I right ???? Note: I wanted to mount the same volume in all 3 ESX host. Please suggest .... Thanks & Regards, Rashid Mustafa

  Read the article

• How to install GNOME desktop from DVD on CentOS 6 using the command line?

  - by alwbtc

  I have installed CentOS 6 in Virtualbox. Although I have chosen to install General Purpose GNOME Desktop, the GNOME desktop does not start. All I get is a black and white text prompt. I would like to know how I can install GNOME Desktop from the CentOS DVD. How do I mount the DVD image? How do I install GNOME desktop from command line? If I already have the GNOME Desktop installed, why doesn't it start? How can I check from command line that I have GNOME installled? This virtual machine does not have internet connection, that's why I want to install the GNOME Desktop from DVD.

  Read the article

• Reconnect Attempts for CIFS share

  - by Davin

  I have a CIFS share mounted in the FSTAB on Ubuntu server, which connects to our SAN and works without issue. Last night we had an issue with the SAN for about 12 hours. We corrected the problem and the Windows boxes restored their mappings. The Ubuntu box did not, but we were able to restore with [mount -a]. I saw options to specify retries in man for NFS but not CIFS. Any ideas on ensuring a reconnect if the SAN goes down again?

  Read the article

• MDADM RAID5 array showing as CLEAN FAULTY

  - by Dean Reilly

  A drive dropped out of my raid 5 array yesterday. It looks like the reason was due to a bad controller so I switched it out and attempted to re-add the drive but mdadm claimed it couldn't do it. So I zerod the superblock and just added the drive normally and left it to resync. When I came to check on the array this morning I was unable to mount it at all and it's now showing as CLEAN FAULTY with two drives missing. The two missing drives are listed as spare and faulty spare. Is there anything I can do in this situation or is the array gone?

  Read the article

• two samba servers and one ldap backend

  - by user2346281

  I had setup a Samba 3 server as PDC with a passdb LDAP backend. Server SID: S-1-5-21-3270... Domain: A Every user has a SambaSID beginning with this Server SID. But now I try to setup a second server for some shares. This server should use the same LDAP backend because I don't want to have two LDAP backends. Otherwise I have to do modifcations (e.g. add users) twice. Second Server SID: S-1-5-21-3797... Domain: B But now when a user try to mount this new share I see this error in samba log: The primary group domain sid(S-1-5-21-3797....) does not match the domain sid(S-1-5-21-3270...) for xxx(S-1-5-21-3270...). I understand the problem but what can I do to avoid to maintain two LDAP backends? Regards, Simon

  Read the article

• Trouble accessing network drives in Windows 7

  - by Warlax

  Hi, Recently purchased a LaCiE network drive. Connected it to my router, configured it, added a user for myself. Installed the "Network Assistant" that came with it - no problem. Went to My Computer Network, found the network drive - was prompted for a login/password to see the contents, types \user and password (leading slash to get rid of DOMAIN) and accesses contents. There is one open share that I can access/mount without problem and there's another share with my user name as set-up via the network drive's web-based config. Double-clicked on that, prompted again. user/password doesn't work! It says I have no permissions but the user/pass combination is PERFECT. Some Windows Vista posts talk about a Local Security Policy menu - but that's nowhere to be found. Any ideas? (Windows 7 Professional BTW).

  Read the article

• No free disk space ;[

  - by skomak

  Hi I have weird situation because Linux df command says that there is no free disk space [root@backup cache]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 72G 70G 0 100% / /dev/sda1 190M 11M 170M 7% /boot tmpfs 248M 0 248M 0% /dev/shm but du -sh /* says [root@backup cache]# du -sh /* 4.0K /bacula-restores 7.4M /bin 5.4M /boot 3.6T /data 116K /dev 55M /etc 204K /home 76M /lib 16K /lost+found 12K /media 0 /misc 16K /mnt 8.0K /mount 0 /net 8.0K /opt 0 /proc 2.3G /root 32M /sbin 8.0K /selinux 168K /share 8.0K /srv 0 /sys 361M /test 20K /tmp 3.2G /usr 1.5G /var Could you tell me where is a problem? Where is my space? I can't figure it out :(

  Read the article

• Upgrading Fedora 16 to 17 with crypted LVM

  - by nijansen

  As the title suggests, I want to upgrade Fedora 16 to the Fedora 17 Alpha build, but I am struggling to do so because of my crypted HDD. To avoid the hustle of CD-ROM or USB install, I thought the preupgrade would be a good idea. It downloads the stuff, stores an image somewhere and creates an entry in my boot manager. When I choose to upgrade from the boot manager it crashes halfway through because it can not access any of the prepared files (because it's crypted) and hands me a debug console. Unfortunately, this case apparently is not covered by the Fedora troubleshooting advice, at least I was not able to find anything there. I would guess I have to mount my HDD manually, but 1) how? and 2) how do I resume the upgrade afterwards? I would really appreciate a push in the right direction.

  Read the article

• Outlook pst problem

  - by tking

  I've used outlook pst files in the past with great success. a few weeks ago I exported about 2 years worth of email into a pst file. size is around 1.5 gb. when i try ti import that pst back into my outlook it says its not a pst file. I've tried to repair it using pstscan and it repairs errors and will even mount it in Outlook but Outlook cant see any emails, like its an empty pst file. Is there any other way to recover my emails besides loading up backupexec and recovering my mailbox before i made the pst?

  Read the article

• df command show no output

  - by user119720

  I'm running the linux distro on my server.When i want to verify the size of the disk, i'm issuing this commnand to get the output. df -h But it does not produce ANY output.Strangely enough when i'm issuing other command such as fdisk -l or du -h it can show output normally. Does anyone now why is this happening?Thanks. edit: here is the output of cat /etc/fstab none /dev/pts devpts rw 0 0 and this is for mount command none on /dev/pts type devpts (rw) none on /proc/sys/fs/binfmt_misc tpe binfmt_misc (rw) edit(2): here is the output of cat /proc/mounts /dev/vzfs / vzfs rw,relatime,usrquota,grpquota 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 none /dev/tmpfs rw,relatime 0 0 none /dev/pts devpts rw,relatime 0 0 none /proc/sys/fs/binfmt_misc binfmt_msc rw,relatime 0 0

  Read the article

• Seeking webcam with own IP address

  - by Mawg

  I am not sure if this is the correct place to post, but I couldn't find anywhere better. I am looking for a webcam/movie cam and this site seems more addressed to still images, but ... I am looking for a small, rugged web-cam which can be hand-held or perhaps head-mounted (failing that I can settle for a tripod mount, but I need portability). It must have its own IP address so that anyone can view its video stream from a web browser. I would prefer 2 way voice communication too. Encryption of data is nice, as is compression (H.264). Maybe also remote control, like causing it to zoom from the browser. Does anyone have any suggestions, even suggestions of somewhere else to look? Thanks very much in advance.

  Read the article

• ubuntu12.04 hangs at checking battery state

  - by crystalbass17

  My 12.04 system hangs at "Checking battery state". At this stage, no commands work eg: ctrl+alt+f1, alt+f5. I ran recovery mode, I ran the command sudo mount -o remount, rw sudo dpkg-reconfigure gdm and gdm was the only one installed so I didn't get a GUI screen. I have an integrated graphics card "Intel Corporation Mobile 4 chipset Integrated Graphics Controller (rev 07)". So I cannot install nvidia drivers as everyone else suggests. I have gone through several similar questions but everyone suggests reconfiguring gdm or reinstalling graphic drivers. I did sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get upgrade to get the latest x-swat drivers. The system still hung at the same line. The other option is to reinstall ubuntu, which is out of the question, since we have a very specific install for our project where the settings are very hard to duplicate. Suggestions/Comments welcome.

  Read the article

• Is there an encrypted write-only file system for Linux?

  - by Grumbel

  I am searching for an encrypted filesystem for Linux that can be mounted in a write-only mode, by that I mean you should be able to mount it without supplying a password, yet still be able to write/append files, but neither should you be able to read the files you have written nor read the files already on the filesystem. Access to the files should only be given when the filesystem is mounted via the password. The purpose of this is to write log files or similar data that is only written, but never modified, without having the files themselves be exposed. File permissions don't help here as I want the data to be inaccessible even when the system is fully compromised. Does such a thing exist on Linux? Or if not, what would be the best alternative to create encrypted log files? My current workaround consists of simply piping the data through gpg --encrypt, which works, but is very cumbersome, as you can't easily get access to the filesystem as a whole, you have to pipe each file through gpg --decrypt manually.

  Read the article

• Should I quit using Ifconfig?

  - by Zhen

  With the servers that mount Infiniband cards, when I use the ifconfig command I have the warning: Ifconfig uses the ioctl access method to get the full address information, which limits hardware addresses to 8 bytes. Because Infiniband address has 20 bytes, only the first 8 bytes are displayed correctly. Ifconfig is obsolete! For replacement check ip. Should I quit using ifconfig? It is deprecated in favor of ip command? Or it will be update in the near future.

  Read the article

• Disable or sleep secondary HDD in Macbook

  - by cpak

  I've done some quick Googling but didn't find an answer. I've put an SSD in my Macbook, and at the same time moved the original HDD to the optical drive bay. I'm running the OS and most of my daily apps off the SDD so the HDD is really just for storing stuff I need now and then. Now I'd like to disable (as in power off or "force sleep") the HDD when I don't need it. Tried unmounting the disk using diskutil unmountDisk but it kept spinning for like 10 minutes. Maybe that's to be expected, but I'd imagined it would stop instantly on unmount. Also, it would be nice to have it disabled by default, and only mount it (= power on) when I need it. Grateful for any input on this!

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >