Search Results

Search found 3251 results on 131 pages for 'firewall'.

Page 77/131 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

• Can a virtual mikrotik box bridge a hyper-v internal network with a hyper-v external network?

  - by mcfrosty

  I am trying to set up a Mikrotik router as a transparent firewall on my network. I got the machine working on a hardware MT box, but my boss wants the MT virtualized. I have been trying the set up where my virtual windows box talks to the Mikrotik via private or internal network on the Hyper-V host. I can get the two machines to talk, but as soon as I set up a bridge on the MT, all traffic ceases between the two. Is it possible to create a bridge for this purpose (having the MT silently in front of my firewalled server)? I could really use some help.

  Read the article

• Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

  - by Di

  I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router.All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled.Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this and how do I fix it. Thanks Di

  Read the article

• Remote desktop With client on Red Hat and Server Vista Business Edition

  - by Dean

  Hi, I'm trying to configure my vista machine to run the Remote Desktop Server yet i'm having problems. I have configured it using the following instructions. Yet it doesn't work. I have disabled the firewall and antivirus software but to no avail. I know the client is set up properly as i can log in to my friend's Remote Desktop server. The client i am using is rdesktop. What else can i try? Thanks in Advance, Dean

  Read the article

• Hostname Problem On WHM / cPanel Installation

  - by Eray

  My CentOS 5.6 server's hostname was "centos" . And then i change it to my domain : hostname domain.com And i started to installing WHM / cPanel as explained in here : http://etwiki.cpanel.net/twiki/bin/view/AllDocumentation/InstallationGuide/InstallingCpanel It's installed very well. And the i reboot my server. After rebooting, i was execute this command for open WHM's 2087 port : iptables -I RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 2087 -j ACCEPT Now i'm trying to browse domain.com:2087 i'm getting Server (centos) not found .I noticed it's forwarding to my old hostname (centos) . And then execute this command to verify me hostname hostname it's returned "centos" again. I'm not sure, why it's returned to old hostname. (I think it returned to old hostname after rebooting) . I'm changed it one more time : hostname domain.com Finally, now my hostname is domain.com . BUt still i'm getting centos server not found error. This is result of iptables -L command. P.S. : domain.com/cpanel is working

  Read the article

• Open Port on Windows Server 2008

  - by user1827348

  I have an external server and I installed a new Service on it. The service is running and I can access it locally. When I tried to get access to it locally, all worked just fine. but when I try to reach it from my laptop over the internet, I get the message, that the port is blocked. I added a rule to the windows firewall that all connections to that port are allowed but it still doesnt work. there is so many things in google that didnt help me, thats why I am asking specifically. I do acutally not know how to google for that right because i am not that into server configs and so on. Can anybody help me, what I have to do, to be able to access that port? From outside.

  Read the article

• Troubleshooting web timeouts with a Belkin router

  - by rexzilla

  I have a Belkin FSD7632-4 ADSL wifi router. Ever since I got it, I've faced this problem of websites timing out. For example, I go to flickr.com, and the images won't load because they come from farm1.static.flickr.com. Either I wait 10 minutes or so until the timed out sockets are closed and retry (with variable results) or I reboot the router. This happens irrespective of whether I use wired or wifi network. I'm in India, using Airtel Broadband, and if I use my ISP supplied Beetel 220BX ADSL router (which has no wifi and only one LAN port), everything works fine. I copied over the broadband settings from my old router: VPI/VCI values=1/32 Encapsulation=LLC MTU=1492 I have not enabled any firewall on the router. Is there anything else I can try? Or is it a defect with the router and should I take it back for a replacement? I bought it just 2 months ago.

  Read the article

• Client/server application RPC connection gets disconnected very frequently

  - by Chris Thompson

  I have a client/server application that uses RPC for the client to communicate with the server. Fairly regularly, I get an event in the Application log that the RPC connection was disconnected: Client callback failed ((0x80010108) ) I have the Windows Firewall disabled on both machines. I've even run the client on a second computer with a clean Windows XP install without any group policies. This has been going on for a long time and no one has been able to figure out why it's happening. The same client/server app works fine at other client locations. Any thoughts?

  Read the article

• Multiple WAN interfaces in same subnet on Sonicwall NSA220?

  - by Ttamsen

  (eta salutation, which keeps getting eaten.) Hi, all. I see a bunch of related questions, so I'm hesitant to ask, but: I have a situation where I have a Sonicwall NSA220 serving as firewall/router for two internal subnets to two external WAN connections. In some locations this is two separate ISPs. In others, it's the same ISP but with multiple circuits. The problem is that one ISP has been unable to provide unique subnets for each WAN interface. Is there any possibility that I might be able to bond the two WAN interfaces into a single virtual interface, and then use source-routing to get internal subnets communicating out the appropriate physical interface? Or even just use traffic-shaping to give each internal network appropriate shared bandwidth? I haven't found anything in the docs, but it seemed like it might be worth asking. Thanks for any help! -Steve.

  Read the article

• How to prepare and secure a Macbook Pro for work/office?

  - by sunpech

  I plan to use my Macbook Pro at work/office. Before I do so, I will need to speak to my manager on how to properly prepare and secure it since this is the first Mac that will be regularly used on the network in the office and company intranet. The intranet comprises mostly of PCs running Microsoft Windows XP, Server 2003, and Windows 7. So there's definitely a Microsoft-only culture in the office, and the infrastructure/networking team are mostly unfamiliar with non-Microsoft technology and software. What steps and software would I need to prepare and secure my Macbook Pro for work/office? Antivirus/Spyware software for Mac required/necessary? What options do I have to encrypt files, or possibly the whole drive/partition? What network/firewall settings should be enabled?

  Read the article

• Why doesn't update-manager allow me to upgrade distribution?

  - by spoulson

  I have an Ubuntu 9.04 PC behind a corporate firewall and proxy server. This requires that in order to get update-manager to fetch and apply updates, I must set the proxy and authentication settings in the Synaptic network configuration. Once done, I can check for updates and things work smoothly (except I don't get popup notifications of new updates, must manually check periodically). However, distribution updates just don't show up in update-manager, such as the newly released 9.10 Karmic Koala. I had the same issue in upgrading 8.10 to 9.04 and solved it by downloading and upgrading from the 9.04 ISO. What do I need to do to upgrade to 9.10 using the standard update-manager UI?

  Read the article

• Internet wireless connected with limited access, windows vista

  - by r0ca

  I had some malware in my computer so I did a bit of manual work to remove it including resetting TCP/IP. Now the malware is gone. I can see my home wireless network and I can get connected to it but when connected I get the Internet wireless connected with limited access message. When I go to the IE I cannot browse. When I tried to ping 192.168.1.1 I got an Error Code 1231 Unconnected Network Problem. I have deactivated my Windows firewall as I thought it could be hyperactive security. Still no luck. I have Norton but it is not active, I have also Avast and AVG installed but they are not active. Any ideas?

  Read the article

• nsclient++ intermittent connection refused on same subnet

  - by jshin47

  I have setup Nagios and nsclient++ on a number of my Windows servers. They are all in the same subnet so no routing or firewall stuff is taking place in between the endpoints, and I have verified that the firewalls on the servers are not causing trouble. The problem is that the scheduled checks sometimes fail with "connection refused" and sometimes work! It is a frustrating problem to resolve because I do not know what to look for. One place I did look is in the nsclient++ logs, where I am seeing this recurring error: ...\trunk\modules\CheckSystem\PDHCollector.cpp:148: Failed to query performance counters: \238... This sounds promising, but I couldn't find much on Google about this error as it pertains to NSClient++

  Read the article

• bind9 dns proxy

  - by Zulakis

  We are offering multiple SSL-enabled services in our local network. To avoid certificate-warnings we bought certificates for server.ourdomain.tld and firewall.ourdomain.tld. We now created a zone in our local DNS-server in which we pointed the hosts to the corresponding private-ips. Now, each time another record for ourdomain.tld, like for example www.ourdomain.tld or alike are changed, we need to update it on both our public-dns-server AND the local dns-server. I would like our local bind-dns to serve all the information from our public-dns but serve different information for these 2 hosts. I know I could possibly have our private-ips in our public-dns but I don't want that for security reasons. The internet dns-server is being managed by a third party, while we have full control of the intranet one. Because of this I am looking for a solution which lets the intranet retrieve the records from the internet one.

  Read the article

• Wi-Fi connected but can't go to any site

  - by Michael Dy

  My Windows 7 laptop can connect to our Wi-Fi signal, I can sign in on Yahoo! Messenger, but I can't go to any site. I can access the Net on other devices. The issue started a few weeks ago, so I've been troubleshooting since then in vain. There's no virus, and I already used System Restore. In Wireless Network Connection Status, the received activity is greater than the sent activity. I turned off Windows Firewall and still no Net access. My ping tests: How do I fix this?

  Read the article

• how can make transparent proxy on more than one port?

  - by ermya

  i want to make transparent proxy with linux ( centos) , i want all incoming connection on port 1000 - 2000 on eth0 forward to eth1 on port 1000 - 2000 in transparent mode i have 2 server 1- linux ( proxy server) 2- windows i want protect my windows server with my linux server firewall also i must make transparent proxy with my linux server linux server have 2 interface one for public network an another for private network connected to windows server so all incoming connection must connect to the linux server (at eth0 public network) first and after checking , must forward to the windows server on private network (with linux interface eth1 ) i can use squid for making transparent proxy but i dont know how i must config the squid for multi port because i want listen in more than 1000 ports for example from port 1000 to 2000 anyone know how can i do ?

  Read the article

• Cannot see http (apache) server outside home network

  - by user165155

  Ive been racking my brain with this all evening. Power went out with a tstorm today, started back up my server... running apache and a team speak server on it. TS is great, cant see my web page outside my network! Firewall is disabled on the pc running it (centos btw), apache is running and working. correct ports are forwarded on my router (my isp blocks port 80). Ive tried changing ports, pretty much everything i can think of. httpd.conf is pointing to the correct addy and port, and my domain is pointing to the correct external ip. Im at a loss, any ideas out there?

  Read the article

• vncserver too many security failures

  - by cf16

  I try to connect to my vncserver running on CentOs from home computer, behind firewall. I have installed Win7 and Ubuntu both on this machine. I have an error: VNC conenction failed: vncserver too many security failures even when loging with right credentials (I reset passwd on CentOs). Is it something regarding that I try as root? I think important is also that I have to login to remote Centos through port 6050 - none else port works for me. Do I have to do something with other ports? I see that vncserver is listening on 5901, 5902 if another added - and I consider connection is established because from time to time (long time) the passwd prompt appears,... right? please help, what to do? even if prompt appeared and I put correct password I get: authentication failure. how to disable this lockout for a testing purposes?

  Read the article

• Yet another "can't connect to MySQL over the network" question - but i seriously tried everything

  - by mireille raad

  Hello, I was left with the easy task of installing moodle. I am VPNing to 2 servers, one for the database and the other apache/php server 1 must connect over LAN to the mySQL db on server 2 I added a user with following priveleges : +---------------+------------+ | host | user | +---------------+------------+ | % | mir | | 10.10.40.15 | mir | | x.x.x.x | mir | | localhost | mir | Disabled firewall temporary made sure that my username/password combinations are correct, flushed priveleges, restarted mysqld i wnt to /etc/my.cnf .. if i try to add the port=3306 bind-address=10.10.40.15 or anything that is different from 0.0.0.0 or 127.0.0.1 - mysql wouldn't restart i read and tried many forums and pages and asked friends for tips but nothing works So my question to you : are there any networking extensions that need to be installed for mysql, how do i know nothing is missing from the installation any troubleshooting tips, any idea how to fix this, any step by step check list, am i missing something simple/stupid, please anything that comes to mind, let me know Appreciate your feedback on this friday night stuck at work :P

  Read the article

• TFS and Sharepoint integration

  - by pho3nix

  I using a Sharepoint 2007 and TFS 2010. I installed all with reports sharepoint integration but when i try create a TeamProject Collections always return this warning: Server was unable to process request. --- TF250029: No user was found within the context of a Web site. Verify that the site does not allow anonymous access. And in sharepoint web applications tfs console window when check my sharepoint portal /sites return a error saying is blocked by firewall or server extensions is not installed, but i have all ok. Anyone can helpme, please.

  Read the article

• Filemaker 10 Advanced sending email via script & SMTP

  - by Sean

  We are using a windows server box to run the databases but we have found via the headers that the emails are send from the local workstation. We have moved to a new email system and have set up a local linux server to securely send email out of our network to devices that do not support new protocols and encryption. But once we set up the script in filemaker 10 advanced (the local machine os x) we set it to the ip of our local box with no authentication but it does not send out an email. It creates a connection we see in the logs on the linux box but nothing more, additionally you can start a telnet connection with no issues. We have also made sure that there are no additional issue that we can see in our firewall policies. Any ideas where we should start? Does Filemaker 10 advanced log errors anywhere because I could not find any log files.

  Read the article

• Running dnsmasq as an authoritative DNS server

  - by Lord Loh.

  I am trying to implement a dynamic dns service for my computers. I have pointed h.lohray.com to my EC2 instance in the NS record of lohray.com and have installed dnsmasq on that system and have made sure to unblock the firewall port. For now, I have statistically added an entry on my /etc/hosts file. 129.118.19.163 i7.h.lohray.com however, i7.h.lohray.com does not resolve correctly with nslookup or dig :-( This is the only time I could have this resolved (online nslookup) - 50.19.103.190 is the IP address of the EC2 instance where dnsmasq is running. Where could I have gone wrong?

  Read the article

• Can i safely block all ports on my sever

  - by Saif Bechan

  I have a web server running pleks and get attacked a lot every day. I configured a firewall, and there are some predefined services such as www, and ftp, etc. I am planning to block all the ports except for the www port and the PLESK port. When I need ftp or ssh access for example i will open the ports in PLESK and then start to work. Is this a good thing to do or are there some downsides on doing this. There are some ports I am not sure of, such as SMTP,POP3,IMAP, DNS. Can i close these ports or is there no need to do so.

  Read the article

• Why does a group policy not applied to the domain administrator account?

  - by Saariko

  I have a working policy on my entire domain. I just found out, when logging with the domain administrator, that this policy is not applied (EDIT: Running : gpresult shows that the GPO's are applied - but, this GPO is for Drive Mappings, and the actual drive mappings are NOT shown) The administrator account - does not have any login script on his profile tab. My GPO's are mainly small/atomic settings: single GPO to handle each settings: UAC, Firewall, printers. GPO status for the object is enabled That's an overview of the Drive Maps: Reading on MS support site, I checked the delegation tab, and it is marked as applied to domain and enterprise admins. Every user gets these policies correctly. The OU that is set is the root of the domain. (for testing purpose - I did that to eliminate hierarchy issues - did not help) Block Inheritance is disabled. (never used it anyway) GPO link GPO Security Filterings

  Read the article

• What are the possible reasons visual studio 2008 team system would not connect to a TFS2008 server

  - by Nikola Stjelja

  I have Visual Studio 2008 Team System installed on my work machine. I use it to work for an offisite clients Team Foundation Server 2008. Yesterday it stopped working. E.G. I couldn't connect to TFS. On my machine I have updates disabled, I have the firewall disabled and have a proper working connection to my clients server. The client didn't change anything on its machine. What are the possible reasons the visual studio couldn't find the TFS server. Note: Other members of my team can connect without problems, and I've checked we have the same configurations).

  Read the article

• Why do I see router and not my real IIS?

  - by Tim Tom

  I am trying to access IIS through web but unable to do so. Basically I have a router (which functions as router and modem) that is given by ISP and I have another router connected to the router given by ISP. My ISP's router can be visited through 192.168.0.1 and the router that I connected to ISP's router can be visited through 192.168.1.1 Please see my ISP's router: As you can see I have DMZ enabled for my router of 192.168.1.1 Now please see my router of 192.168.1.1: As you can see I added a virtual server for port 80 where 192.168.1.125 is my private IP. I rebooted both of my modems an tried to visit my IP from: http://www.whatsmyip.org/ and after doing so, when I type my live IP I still see my router of 192.168.0.1 instead of my IIS. What am I missing? Note: I have disabled Firewall on both of the routers. Any help would be appreciated.

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >