Search Results

Search found 76332 results on 3054 pages for 'installation problem'.

Page 77/3054 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

• Why does installing 11.10 or 12.04 on old laptops fail?

  - by Adam

  I recently reimaged my Lenovo t400 with Ubuntu. However, after wiping two other systems (Compaq Presario 2100 and Dell Latitude D600) both hUbuntu 11.10 and Ubuntu 12.04 fail to load on boot. I am concerned that there is some type of issue using Ubuntu on these older systems as every part of the process has been repeated/attempted several times in the same manner as practiced in the successful load of the newer Lenovo t400. I now have two laptops without an operating system as the discs/thumb drives that were formatted to load on these devices do not seem to work. I would appreciate any assistance that you may be able to provide. Regards, -Adam

  Read the article

• install a specific ubuntu version

  - by Dariopnc

  What I'd like to do: have Ubuntu installed on a USB drive and from there install any ubuntu version on a hdd. This is kinda different from using usb-creator because I'd like to have a persistent ubuntu install on the USB drive and not upgrade it every 6 months. From there I'd like to be able to install the most recent ubuntu version. I think it's just a matter of configuring ubiquity, but don't know if this is the case and how exactly do this.

  Read the article

• Two Home and Boot partitions after installing Ubuntu 14.04 and Downgrading to Ubuntu 12.04

  - by Jatttt

  I have Ubuntu 12.04 LTS and I am experiencing some problems. I didn't have Ubuntu 12.04 on a drive to install it but I did have Ubuntu 14.04. So I installed it and downloaded Ubuntu 12.04 using Ubuntu 14. Now, I have 2 home partitions and 2 boot partitions. One home and boot is mounted at /media and the other one is /home and /boot. I cannot get rid of /media/HOME and /media/BOOT even using Gparted. How do I get remove them?

  Read the article

• Error when trying to install Menulibre in Lubuntu 12.10 [closed]

  - by cipricus

  Possible Duplicate: How can I fix a 404 Error using a PPA? When trying to add a PPA (to install menulibre) I get these errors: Err http://ppa.launchpad.net quantal/main Sources 404 Not Found Err http://ppa.launchpad.net quantal/main i386 Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/menulibre-dev/devel/ubuntu/dists/quantal/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/menulibre-dev/devel/ubuntu/dists/quantal/main/binary-i386/Packages 404 Not Found Why is that and how to solve it? As the question was flagged as duplicate: I should clarify that I want to know why i cannot add a source that seems active in launchpad, and how could i add it and install the program, not just how to remove the error by removing the source in the software sources list Menulibre seems available in software sources. Why can't I install it? I'm in Lubuntu 12.10

  Read the article

• How to get the 'Install alongside Windows' option, i only see 'Install inside Windows'?

  - by IanDess

  I created a bootable USB Stick with Ubuntu 13.10 and when i boot from it and try to install it i only get the option "Install inside Windows" and the button in the bottom right corner says "Restart to continue". But i don't want that, i want a real dual boot. I installed Ubuntu few days ago on my laptop and i clearly remember that it said "Install ALONGSIDE Windows". What should i do to get that option? PS i previously had Ubuntu installed on this PC from WUBI, but i uninstalled it.

  Read the article

• "Try Ubuntu without installing" results in graphical artifacts on MacBook

  - by ubuntukeks

  I am trying to bless my MacBookPro 5,3 (Unibody/Core2Duo/Nvidia 9400M+Nvidia 9600M GT) with Ubuntu 12.04 (already got rEFIt running), but every time I select Try Ubuntu without installing, it will lock up and always give me the same coloured graphical artifacts all over the screen. Whether I use a CD-ROM or a USB Stick, it does not change a thing. Is there anything else that can be done or am I stuck for now?

  Read the article

• Installed Ubuntu on 12.04 on my MacBook Air now I want to expand the partition

  - by Josh

  I recently installed Ubuntu 12.04 on a 40GB partition on my Mac Book Air (5,2). I'm having so much fun with it, I'm ready to make the switch permanently and replace it as the primary OS on my machine. I realize I can wipe the machine and start from scratch, but I'm looking for alternatives since I like my current setup. Options are... Create a backup and restore the back up to a larger partition (Assuming I should keep the default OS X install for firmware updates) Create a backup and restore to the entire drive (create a restore usb stick for OSX - not sure if that's possible?) re-size my current partition and wipe the OS X partition and either, A. re-install OS X (similar to option 1) or B. create the USB key (similar to option 2). Thoughts? Any other suggestions? Would also like thoughts on the "optimal" or "best practice" for partitioning Ubuntu. Thanks!

  Read the article

• Live cd and usb install failure blank screen when trying to install on an HP Pavilion dv6

  - by Ajian

  I recently bought a new computer, and have been trying to install linux on it, 11.10 x64. It is a HP pavilion dv6-6117dx. 2.4GHz/1.5GHz VISION A8 Technology from AMD with AMD Quad-Core A8-3500M Accelerated Processor AMD Radeon HD 6620G Discrete-Class Graphics I am pretty sure i picked a unsupported graphics card or something. I have tried booting from usb as well, but the screen becomes blank after rebooting.

  Read the article

• Can't install Ubuntu using Wubi on a Windows dynamic disk [closed]

  - by Tharindu

  Possible Duplicate: I can't able to install ubuntu alongside with Win7 ..: When I try to install ubuntu 12.04 - 64 bit alongside win 7 prof. 64 bit it generated the following error. How could I proceed without having this? I - An error occurred: Error executing command command= C:\Windows\sysnative\bcdedt.exe /set {1 bO4672f-5969-11)-a75c-d3d3Od877b8O} device partition= F: retval=1 stderr=An error has occurred setting the element data. The request is not supported. stdout For more information, please see the log file c\users\dell\appdata\local\temp\wubi-12.04

  Read the article

• From where can I install my nVidia drivers? [closed]

  - by Arthur Wulf White

  Possible Duplicate: How do I install extra drivers? Additional Drivers tool in Ubuntu 12.10? I have read here and here that I should be able to install drivers. So I'm finding the Additional Drivers menu. To install nVidia driver. I started looking for System -> Administration and not finding it. I have an icon that says System Settings and it has any option related to drivers. NOTE: I am using Ubuntu 12.10.

  Read the article

• how to install gerix on ubuntu 12.04 using backtrack repositories?

  - by werever

  I got instructions from here, and I found several sites with similar instructions but somethig is wrong with the repositories on 12.04. This should work for 11.10 and previous versions. Any ideas how to install backtrack repos and some back track apps on 12.04? I read about downloading the .deb package for gerix and manually making the same folder structure that gerix uses on backtrack, then manually run the python script, but this way didn't work for me either. How can I get gerix installed and working on my Ubuntu 12.04 system?

  Read the article

• Using Ubuntu isn't worth it for me, Windows works best.

  - by user72475

  Welcome to Ubuntu and the lack of support( 12.04 LOS ). If I say Ubuntu 12.04 is a so so broken OS, I will get flamed. But if I ask for help, I can here the crickets chirruping. Unix/Linux user have an attitude and really don't like to share info. Because if they help everyone, they wouldn't have anyone to call a noob. Then their moms basement wouldn't be the same without being able to flame Ubuntu noobs. I am going back to windows I don't have to spend all day trying to get a single app or option to work. Sure Ubuntu is fun to tinker with but it is not a professional consumer OS. Windows is a better consumer based os, I don't need server software(Unix) that's been broken and hacked to be used like windows(Ubuntu). All the time I have wasted trying to get Ubuntu to work CORRECTLY cost me more the Windows 7 ultimate by far. HOW MUCH IS YOUR TIME WORTH. If you are unemployed and have all night to set in your moms basement and flame noobs then Ubuntu is for you. If you want to use an external monitor on your notebook or download Adobe reader use Windows 7. When are we going to stop complaining about corporate giants like Microsoft and admit they have great products. Gave it a shot, did work for me, I have better things to do with my time. bye Ubuntu

  Read the article

• How can I install from a 9.04 live USB/DVD?

  - by bstpierre

  I have a 9.04 (Jaunty) ISO burned to a USB stick; it appears to be a "live DVD". When I boot from it, I get a GRUB menu listing: Ubuntu, with Linux 2.6.35-generic (This matches the system currently installed on the HDD?) Ubuntu, with Linux 2.6.35-generic (recovery mode) Memory test Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1) Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda1) Ubuntu 9.04, memtest86+ (on /dev/sda1) When I select Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1), I arrive at the desktop of a 9.04 system. I want to wipe the HDD clean and install 9.04. (Upgrading to something newer is not an option; this version is required by a legacy application.) How can I install from this live USB image? I vaguely remember some incantation that I should be able to use in the booted system, but my google-fu is broken at the moment. I'm comfortable with low-level commands, so if you want to recommend a more hard-core strategy, I'm willing to roll with it without requiring a ton of detail...

  Read the article

• I am one step closer to installing ubuntu, back is grayed out and I was stupid enough to not make a backup

  - by user283544

  Ok, so yeah, i've been stupid enough not to make a backup and 1 step closer to installing ubuntu. What I need is that is windows totally safe and not gonna be touched I made a new partition from windows, and in ubuntu installer I chose "Something else" Then I chose that partition as an ext4 and mount "/" Device for bootloader is my hard disk, /dev/sda/, that's what keeps me a little aware. So I need a quick answer is my windows 7 gonna be touched?

  Read the article

• Git cloning for Ubuntu Kernel gave error: index-pack died of signal 9447381

  - by LAMOHAN

  My /usr/src is found empty. So I tried to install a fresh Kernel. But was unsuccessful with some error. I did this: git clone git://kernel.ubuntu.com/ubuntu/ubuntu-precise.git but it gave this error message: error: index-pack died of signal 9447381), 802.20 MiB | 88 KiB/s fatal: index-pack failed My current Kernel version is 3.8.13-bone20 #1 in LINUX -Ubuntu-armhf Can anyone help me to solve this?

  Read the article

• How to install kghostview

  - by feelfree

  In order to use kghostview, I download the page from here. After that, I run the following command: sudo dpkg -i kghostview_3.5.10-0ubuntu1~hardy1.1_i386.deb However, I have the following error messages: dpkg: dependency problems prevent configuration of kghostview: kghostview depends on gs; however: Package gs is not installed. kghostview depends on kdelibs4c2a (>= 4:3.5.8-1); however: Package kdelibs4c2a is not installed. kghostview depends on libqt3-mt (>= 3:3.3.8-b); however: Package libqt3-mt is not installed. dpkg: error processing kghostview (--install): dependency problems - leaving unconfigured It seems that I should also install some external packages such as gs, kdelibs4c2a and libqt3-mt. However, I do not have any idea of how to install them. I try the sudo apt-get install command, but fail. Any idea will be appreciated.

  Read the article

• Black screen with blinking cursor after dual boot install 14.04

  - by chillstream

  I have just installed Ubuntu 14.04 on my toshiba laptop along side Windows 7. When the menu comes up to choose which OS to boot into, I can easily boot into Windows 7. I cannot successfully boot into Ubuntu. All I get is a blinking cursor on a black/purple screen. I attempted the nomodeset trick, which was a bit more successful. I got a screen with a lot of code, but then it stopped with a blinking cursor at the bottom and wouldn't load anymore. As a last resort, would returning my laptop to factory settings get rid of linux and the partitions made to the drive? I already did this to my laptop when it was just windows, which is why I thought I might as well try to add Ubuntu. But it's a lengthy process, and if it won't get rid of the partitions and ubuntu, I won't bother. I appreciate any help ~many thanks

  Read the article

• How can I install Ubuntu alongside Fedora?

  - by user285248

  I am currently running Fedora and would like to duel boot with Ubuntu. I do not want to replace Fedora, I would like to keep it as my main OS. However, when using the Ubuntu installer I only get the option to either: "Replace Fedora release 20 (Heisenbug) with Ubuntu" or "Something else" Is there I way I can install ubuntu alongside Fedora without deleting it? If so, as I would like fedora to be my main OS, is there also a way to make it the top grub option? I have tried partitioning with gparted however I can't split the fedora partition, it says it is all used however I have only used about 100/500GB. I am trying to install ubuntu 13.10 off a live USB stick, I will upgrade to 14.04 when I install it but don't want to make a new live USB.

  Read the article

• Which iso image do I need to install Ubuntu 12.04 on a Macbook Pro so that it boots using UEFI?

  - by gentmatt

  Unlike with earlier releases, the website is unclear on giving a straight recommendation for installing ubuntu on a mac: http://cdimage.ubuntu.com/releases/12.04/release/ I've read several times, that I should use an alternative image. But this is only offered as 64-bit. However, I'm also told to rather use 32-bit images for better software compability. http://cdimage.ubuntu.com/releases/12.04/release/ubuntu-12.04-alternate-amd64+mac.iso Even though I should only use alternative images, there is offered a standard desktop image which is "adjusted to work properly on Mac systems". http://cdimage.ubuntu.com/releases/12.04/release/ubuntu-12.04-desktop-amd64+mac.iso Question Which image should I take? Do both of these images offer UEFI boot? I've tried both of them already, but both have setup an install with BIOS emulation. This is quite annoying because of the short battery life and high temperatures which are harmful to battery longevity.

  Read the article

• Hangs on Splash Screen after login (auto-login), how can I fix this?

  - by Davious

  Computer: Toshiba Terca A4 OS: Ubuntu Desktop 10.10 After installing 10.10, the splash screen hangs and the mouse pointer appears. Anyone know what I can do to fix this? ~/.xsession-errors has (nautilus:3190): GConf-CRITICAL **: gconf_value_free: assertion `value != NULL' failed btw, Safe-mode works: I do a Ctrl-Alt-F1 into a command prompt session and run ps aux | grep slave then sudo kill [id of gdm-simple-slave] That killed the session and allowed me to login in safe-mode. Safe-mode works. Then I open a terminal and run ps aux | grep nm- sudo kill -9 [id of nm-applet] nm-applet --sm-disable & to get my internet connection up.

  Read the article

• INstlling ubuntu

  - by Erich

  Am trying to install ubuntu 12.04 on a pentium 4 with a hard disk that's been totally wiped clean. Have made an iso image, burned it on a cd and it has been verified. Checked to see if separate files have been burned on cd and they have. When I boot to the disk I get the word unbuntu with some progress dots, 5 min later it goes to a red screen with the mouse arrow on screen. It has stayed in this condition for over half an hour now. Help? erich

  Read the article

• Installing 12.04 on a Dell Dimension 2200

  - by Corn

  I'm attempting to install Ubuntu from a 12.04 live CD. A few boots have gotten me (initframs) in BusyBox. During one attempt, it actually said it had loaded Ubuntu and gave me a command prompt, before quickly taking it away. After the working attempt, the HDD was removed from the BIOS menu for some reason, but was auto-detected on a boot into Windows. I haven't got a clue what I'm doing wrong. I don't get the little Ubuntu graphical splash while it boots either, but F6 (or rather spamming many keys) will display a list of the various [starting]/[stopping] it's doing.

  Read the article

• Installing multi-boot Linux system

  - by user94924

  I have a dual (XP/Linux) boot Compaq Presario S4500UK with a couple of spare partitions on the boot drive which I want to use for testing different Linux distros/configs before installing them on "live" machines. I tried this with Oneiric which worked fine until I came to uninstalling the test system. Fortunately Oneiric uses Grub2 and so redirecting the bootloader to work from the original Linux partition was a piece of cake - if a bit annoying. I now need to do some tests on Hardy and DSL (Damned Small Linux), neither of which use Grub2. Question: Is it possible to install a test operating system without adding/replacing the bootloader (ie so I can still use Grub2 from the original partition with its nice interface and recovery facilities)? Is there another way of uninstalling/decommisioning a test OS which doesn't trash the boot loader? (The only way I know to do this is by deleting/reformatting the partition which takes with it the bootloader which is in that partition). Any help would be much appreciated. Tks jg1

  Read the article

• Cannot Start My System

  - by KrishArora

  I have installed Ubuntu Studio 13.10 installed on my system. Today I have rebooted it and now it is not starting or booting again, the logo is seen and there appears an error message that says :- [23.755113] systemd-udevd[329]: inotify_add_watch(6, /dev/sdb, 10) failed. No such file or directory After this message the system doesn't start. I have done a boot repair through live CD, but that also doesn't helps me. Here is the link of the boot repair process. Please help me how to restore my system without loosing my data

  Read the article

• reinstall windows 8 on clean ubuntu hard drive

  - by Vegard Lokreim

  For a moth ago, i took a clean install of ubuntu 13.10, i formated the entire hard drive that contained windows 8 and installed ubuntu. Now i want to reinstall windows 8, but when i boot up with a bootable usb, my computer wont recognize the bootable usb unless its a bootable linux usb... i have done a little bit research and i think it have something with MBR to do, but i have no idea what to do! Please help :)

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >