Search Results

Search found 7940 results on 318 pages for 'intel wireless'.

Page 77/318 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

• 3.5.0-18 kernel update broke BCM43228

  - by ignition

  After updating the kernel to 3.5.0-18 the Broadcom BCM43228 wireless card of my Acer Aspire One 756 has stopped working properly. The card often refuses to connect to my AP, and if it connects it behaves very unstable. I have already reinstalled the drivers, as recommended by googling around. As far as I can tell the only driver that supports my card is the bcmwl package. I found one solution saying I should install broadcom-sta using module assistant, however I could not get this to install and apparently broadcom-sta and bcmwl are effectively the same driver? Is anyone experiencing similar issues? Is it possible to just downgrade to the previous kernel version?

  Read the article

• After running updates in 10.10 Netbook Remix, Ralink 5390 Not working

  - by nosound

  Additional Drivers still lists the driver. Reports it as being activated but not in use. Prior to running updates, wireless was working fine. Set it up using this guide: http://www.upubuntu.com/2012/02/how-to-install-drivers-for-ralink.html Thoughts and reflections would be much appreciated. ... nm. Using Synaptic Package Manager, marked for reinstallation, reinstalled, rebooted. Back to the way things were. Little new to this side of the world. ;)

  Read the article

• in ubuntu 12.04 how may i know if my devices have it's driver installed??

  - by Aldo

  i have a dell N4110 laptop, and i want to know if the driver is installed and working well, something like the device manager in windows , or another way to know if a device is driverless or if the device might have a better driver, like my mousepad, in windows it have multi-touch gestures , that scrolls or zoom with two fingers (like an ipod) but in ubuntu it just works the right part as a scroll bar, so maybe it is installed one driver, but i need other one that uses well my devices. and the grphics card, i have not idea if it is well installed or isn't. i have a Intel 3000hd graphics card. thank you for your time. have a nice day people! =D

  Read the article

• I`ve got some problems with new Acer Aspire S3

  - by xcariba

  I just got a new Acer Aspire S3 Laptop, and I've installed Ubuntu on it. Here is some problems: 1. Bluetooth (AR3012) can't find any devices. rfkill shows that everything is fine, but I still can't connect to any device. (Maybe it was turned off in stock windows?) 2. Can't change screen brightness (I've tried Timex's solution with new 3.2-rc kernel and some grub options, touchpad works fine,but I still can`t use Fn+Right/Left) 3. 720p video in all players(VLC, mplayer and totem) works wrong. I found some similar problems on intel video chips with vblank sync or something like that. Video plays as it should, but i always see a line which appears on action scenes (looks like some parts of a screen updates faster) Maybe there are some solutions from similar laptops that I can find? PS I've tried ubuntu 11.04 with old kernel and linux mint 12-rc with 3.2-rc2 kernel.

  Read the article

• Removing a module when I add a new better one?

  - by yinon

  I'm using this guide to install my TL-WN822N (Wireless/Wifi). I need to add 8192cu at the end of /etc/modules, but I see another module there (Copy-Paste file): # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. # Parameters can be specified after the module name. lp 8192cuvhba vhba Should I remove it or is that unnecessary? Thanks for any help!

  Read the article

• Is it possible to update my graphic card drivers?

  - by madmaxpt

  This is what the lspci -v command shows in the VGA compatible controller section: 00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller (prog-if 00 [VGA controller]) Subsystem: Dell Device 048e Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f0200000 (32-bit, non-prefetchable) [size=512K] I/O ports at 18d0 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at f0000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 i915 is only compatible with OpenGL 1.4 and cannot use shaders and I'd like to use some Open GL 2.0 functionalities. Is it possible to update the drivers or is my hardware limited to OpenGL 1.4 ?

  Read the article

• gnome shell with very high CPU usage

  - by 501 - not implemented

  i'm running ubuntu gnome 13.10 on my dell latiude e6510 with a i5 m560. The I5 comes with a embedded Intel HD 3400 Graphics. The average cpu usage of the gnome-shell is by 160% it's to high, I think. Is there a problem with a driver? If i call the command glxinfo | grep OpenGL it returns: OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.3, 128 bits) OpenGL version string: 2.1 Mesa 9.2.1 OpenGL shading language version string: 1.30 OpenGL extensions: Greetings

  Read the article

• Deactivated wifi drivers, now they won't activate again on a Dell Mini 10v?

  - by UbuntuFan

  I have ubuntu 13.04. In the software and update menu, under additional drivers, Were it says "Broadcom Corporation; BCM4312 802.11b/gLP.PHY" the box labbeled "do not use it ticked" and when i try tick the one that says "Using Broadcom 802.11 Linux STA Wireless drivers....." it wont let me apply changes, it starts doing it then stops and re-ticks the do not use box. Because of this I can not use the wiress driver. Is there another way i can fix this. Or maby restore ubuntu to previous date. I accidentally ticked the do not use box this morning and now can't undo it. I have restarted several times to try apply changes and still no luck

  Read the article

• Deactivated wifi drivers, now they wont activate again?

  - by UbuntuFan

  I have ubuntu 13.04. In the software and update menu, under additional drivers, Were it says "Broadcom Corporation; BCM4312 802.11b/gLP.PHY" the box labbeled "do not use it ticked" and when i try tick the one that says "Using Broadcom 802.11 Linux STA Wireless drivers....." it wont let me apply changes, it starts doing it then stops and re-ticks the do not use box. Because of this I can not use the wiress driver. Is there another way i can fix this. Or maby restore ubuntu to previous date. I accidentally ticked the do not use box this morning and now can't undo it. I have restarted several times to try apply changes and still no luck

  Read the article

• Wifi very slow on Ubuntu 12.04 but not on Win7, need help

  - by user84504

  I have an enormous problem: I've a Sony Vaio VGN-NR21S with win7 and Ubuntu 12.04 in dual boot. With Windows everything is fine (except that is windows) but with Ubuntu the wireless connection is awfully slow, basically unusable. I've already search for similar discussion but the solution proposed didn't worked. I've noticed this issue also in live mode both with ubuntu and linux mint. I've installed Ubuntu onto an Acer that shows the same problem when connected via wifi to my router, so I think that maybe the issue is about compatibility with my home router. I really need help, I don't want unistall ubuntu! Please tell me which output u need to help me, thanks.

  Read the article

• WiFi USB adapter showing the Network ..... but no connection in effect

  - by Idrees

  I have Pentium 4 system 3 GHz, 1 GB RAM ..... (no built-in WiFi) I installed Ubuntu 12.10 on my PC, works fine. It picked all the drivers for audio, video itself. I plugged TP-Link 54Mbps High Gain Wireless USB Adapter (TL-WN422G) ..... (link for the device: http://www.tp-link.com/en/products/details/?model=TL-WN422G) Now what happens is that the WiFi network is detected and shown in the "Network Connections", and it is also connected to it but when I open Firefox it is as if there no internet connection at all.

  Read the article

• How to force GNOME panels et. al. to display on a different monitor without mirroring?

  - by GrueKun

  So, I recently purchased a new 23" monitor for my PC. However, I can't use it with the PC currently as I am waiting on a replacement heatsink. In the mean time, I wanted to use it with my Dell laptop. I hooked it up to the VGA port, and it seems to be working properly. However, I wanted to know if there was a way I could move all of the main display elements over to the attached monitor? I wanted to shut the LCD panel off on the laptop and hook it up like a desktop. Relevant specs: Ubuntu 10.10 x64 Intel graphics chipset The attached monitor is currently set as the default monitor. Any suggestions are welcome. :)

  Read the article

• How do I do a B43 Legacy install on Ubuntu 11.10?

  - by Gozzy

  I recently installed ubuntu onto an extra hard drive and everything booted correctly. However, my Linksys wireless card is not working. I went though all the forums and walk throughs and I know that I need to install the b43 legacy firmware to get the card to work. When I try to install the files, I keep getting the message in Terminal saying "No such file or directory" for every file i need to run. It's Ubuntu 11.10 on a dell optiplex gx280. Also, the "pool" file that is supposed to be on the file system is not there

  Read the article

• Laptop wakes while lid is closed and overheats

  - by user56601

  I'm running 12.04 on a toshiba L305D with athlon x2 (Already suspect this has something to do with it). My laptop will wake from suspend, presumably from wireless scanning. This is a serious bug as sleeping laptops are often inside bags, so the cooling system is effectively disabled. I can no longer seriously use Ubuntu when I have to worry about hardware damage every time I close the lid. There is shockingly lack of information about anything close to this. So many control panels have been removed or dumbed down, and everyone seems to want this behavior instead of the opposite, for servers or torrents of whatever. Well, most laptop users will 99% be likely to regularly put their laptop in a backpack or briefcase or other bag. Does anyone know how to fix this?

  Read the article

• Samsung NC10 Broadcom difficulties

  - by simonp

  I am new to Ubuntu/Linux and am stuck already! Any help much appreciated. I have managed to install Ubuntu Maverick 10.10 (from a USB flash drive) on my NC10 which also has Windows 7 on the partitioned drive. But the wireless internet is not working. I have identified the hardware as a Broadcom BCM4313. I have also managed to find that the correct driver is installed (Modaliases for Broadcom 802.11 Linux STA driver). I have followed advice from elsewhere and there does not seem to be any competition from other drivers. I am now stuck and do not have any other internet access on this netbook. Any ideas?

  Read the article

• Need instructions on how to create wpa_supplicant.conf and add fast_reauth=0 to it

  - by nutty about natty

  Like many other natty users on a university/academic network, I'm experiencing annoying frequent disconnects/hangs/delays. See, for instance here. I would like to learn how to add fast_reauth=0 to the wpa_supplicant.conf file. This file, it seems, does not exit by default, and needs to be manually created first: README You will need to make a configuration file, e.g. /etc/wpa_supplicant.conf, with network configuration for the networks you are going to use. Further, I installed wpa_gui which probably needs to be launched with parameters, else it's pretty blank... What I'm hoping for is this: That creating a wpa_supplicant.conf file with fast_reauth=0 in it, saving it to the relevant path, will work and make my uni wireless (more or even completely) stable. I read mixed reviews about wicd (as an alternative to the network manager). Also note that on my basic wlan at home (with bog-standard wpa encryption) the connection is stable. Thanks!

  Read the article

• Install Ubuntu on iMac 21.5" (mid 2011)

  - by Mystic Mark le Maverick

  I has a dual boot system with MacOSX 10.8.2 and Microsoft Windows 7 Home Premium x64. I would like to install Ubuntu alongside the two existing operating systems for cross platform development purposes. My System specs are listed below. iMac 21.5-inch (mid 2011) Intel Core i7 @2.80GHz AMD Radeon HD 6770M Facetime HD Internet Camera Thunderbolt port Wireless Airport adapter card Apple 8x Superdrive Apple Magic Mouse and wired keyboard with numeric keypad Will rEFIt install properly on my machine too? Thanks you very much for the help.

  Read the article

• Ubuntu and WiFi Network

  - by Anonymous

  I have been trying to figure out this problem. I am currently dual-booting Ubuntu with my Windows machine. My Ubuntu would connect to my wireless router but it cannot access any web pages nor ping any hosts. Wired connection works just fine. My Windows OS in the same machine (with the exact same network configuration as my Ubuntu machine) connects and works fine. I don't know why Ubuntu cannot access the Internet. Any ideas?

  Read the article

• How to run just one application over ethernet while others on wifi

  - by db42

  I normally connect my laptop via wifi. However, I would like to use synergy to share my workplace desktop machine with my laptop. But the problem is that my desktop machine doesn't have wireless support. So, I have no other options except using ethernet to connect them. My first question is - Is it possible to use ethernet for synergy and keep using wifi for all other application. If the answer is yes, can somebody please guide me how to achieve this. Thanks,

  Read the article

• How to set up multiple GPUs (12.04)?

  - by Brother Erryn

  I have two GPUs: one Intel i915 integrated, and one NVIDIA 560 Ti. This is NOT a hybrid setup, nor a laptop. In Windows 7, each card is connected to a different monitor, with the NVIDIA doing any "heavy lifting". For the life of me I cannot get Ubuntu to recognize the i915, but when logging off or rebooting, the shutdown actually appears on the i915. lshw lists both. I'm running the "current" NVIDIA drivers (not the experimental), but Displays calls its monitor a "Laptop". Is this even possible under Ubuntu? The only things that even looked like potential solutions were for laptop hybrid setups and used Bumblebee, but that doesn't seem to apply here.

  Read the article

• Samsung RV520 with 12.04 freezes while having WiFi and brightness control issues

  - by daveu1

  I have a new Samsung RV520 and have just installed Precise Pangolin 12.04 LTS. I am having serious problems now with the wifi constantly disconnecting. This then causes the brightness control to appear on the screen. The screen starts flickering and then freezes the whole machine. Indeed the brightness control doesn't work at all. I am using a Intel Centrino N wireless card. Please can anyone provide any guidance as to how to resolve these issue on this machine. Many thanks for your help.

  Read the article

• How come ASUS sells Ubuntu installed 1225Cs, when we dont have drivers for gma3600?

  - by sumit_gt

  I recently purchased a ASUS 1225C cedar trail netbook. It didn't come preinstalled with Ubuntu like it comes in some markets. I installed Ubuntu 12.04 LTS on it. While Ubuntu works just fine, I am bothered by the lack of proper graphics support because of intel gma 3600. I am aware that this is not a problem of Ubuntu. My question is this: How does ASUS manage to sell these netbooks in other markets with Ubuntu preinstalled? How does ASUS manage to get everything to work? And if they can, why aren't I able to do the same? link: For more on Asus 1225C As you can see, they show Ubuntu working perfectly in the screenshots. Is this false advertising?

  Read the article

• Wifi connection problems

  - by user12511

  I have Ubuntu 10.10 installed on a HP Pavilion DV2750ea. The wifi card is an Intel 4965AGN. When I first started using Ubuntu on this laptop it connected wirelessly to the network. Then it suddenly stopped. The Wifi card power light is off and all information says the card is disabled. When the laptop is powered on the wifi power light turns on and stays on until Ubuntu finishes loading. I have replaced the wifi card and the wifi switch module with no change. Please can you help.

  Read the article

• Ubuntu Server 12.04, Wifi problems

  - by brievolz84

  When I installed Ubuntu Server 12.04, I selected the ethernet adapter because I will use that most often; however, I would like to use wifi sometimes as well. This is how far I've gotten with this problem. lspci 02:00.0 Network Controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection iwconfig wlan0 IEEE a/b/g/n BSSID=off/any Mode=Managed Access Point=Not-Associated TX-Power=off Retry Long Limit:7 RTS thr:off Fragment thr:off Power Management:off I tried to do iwconfig wlan0 up but that doesn't work either. The error message said something along the lines of rfkill but I'm not connected to the Internet to download that particular program. Any help here would be great

  Read the article

• How to install nvidia optimus driver on ubuntu 12.10?

  - by Adam

  I have followed http://ubuntuportal.com/2012/01/bumblebee-3-0-tumblewed-nvidia-optimus-gpu-switching-for-linux-has-been-released-how-to-install-bumblebee-3-0-on-ubuntu.html this guide to install nvidia driver on my Dell Inspiron N5110 notebook (Intel HD Graphics 3000 + NVIDIA GeForce GT525M), but i always get some error while i want to start any program with the optirun command. Terminal says: adam@Adam-LT:~$ optirun firefox [ 1482.559417] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver [ 1482.559517] [ERROR]Aborting because fallback start is disabled. My laptop cooler always cools the laptop, which means that nvidia card is consuming power in the background. (Terminal sometimes says something daemon-server is not running.) Can you give me some solution for this?

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >