Search Results

Search found 5435 results on 218 pages for 'ones and zeroes'.

Page 77/218 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

  • Using Y split cables to connect two servers to a single PDU receptacle

    - by sagi
    We have bought a few 30amp 208v PDUs that only have 9 receptacles. The servers we are connecting to those PDUs will not use the full 30amps (at 80%, or actually 40% since we use redundant power) so we need to find a way to connect more than 9 servers to the same 9 receptacles so we'll be not wasting capacity that we pay for. I thought about using a Y split cable like this one: http://www.cablesandkits.com/power-cord-c14-c13-splitter-cable-awg-p-515.html That will let me connect two servers to a single receptacle. Each of the individual receptacles can provide 12 amps of power and individual servers are unlikely to consume more than 3 amps at maximal load so it should provide sufficient power. The question is if there is any other reason why this may be a bad idea and if there is any other solution other than buying PDUs with more receptacles (which I don't want to do because I must use horizontal PDU on these racks and ones with more receptacles consume more U space).

    Read the article

  • Reconfigure RAID on Dell PowerEdge T710

    - by Stefano Borini
    I have a Dell PowerEdge T710 under my feet at this very moment, with RedHat Enterprise Server 5.3. I have 6 1TB disks and two 500GB. parted reports two devices, one 500 GB and the other 4 TB. So I assume the RAID has been setup as mirror for two disks, and I assume as RAID 5 the remaining ones. I say "I assume" because it does not make sense. Having 6 disks in RAID 5, I should obtain a total space of 5 TB, not 4TB. It's not even RAID 10: I would end up with a 3 TB unit. How can I check and eventually modify the RAID array definition? In the Fujitsu Siemens I played with some time ago, at boot I had the chance to enter the controller BIOS, but here I don't see a clear way to perform this operation.

    Read the article

  • ServerFault Wiki: How does Subnetting Work?

    - by Kyle Brandt
    How does Subnetting Work, and How do you do it by hand or in your head? Can someone explain both conceptually and with several examples? Serverfault gets lots of subnetting homework questions, so we could use an answer to point them to on serverfault itself. If I have a network, how do I figure out how to split it up? If I am given a netmask, how do I know what the network Range is for it? Sometimes there is a slash followed by a number, what is that number? Sometimes there is a subnet mask, but also a wildcard mask, they seem like the same thing but they are different? Someone mentioned something about knowing binary for this? Not looking for links to other sites (unless maybe you have one post with a bunch of good ones). I already know how to subnet, I just thought it would be nice if serverfault had a generic subnetting answer.

    Read the article

  • ERROR 0x8007007A when trying to schedule a task

    - by Paul Hollingsworth
    I am getting the error "The data area passed to a system call is too small. (Exception from HRESULT: 0x8007007A)" when trying to create a scheduled task on a particular windows machine. The problem description is identical to that described in this Microsoft KB article I followed their steps to resolve: Stopped the task scheduler service (right-clicked "Task Scheduler" in the Services window from Control Panel and selected "Stop"). Restarted the task scheduler service Waited 15 minutes tried to schedule the task. But the error is persisting. To give more context of how we are creating these scheduled tasks, they are actually generated automatically from a configuration script (we run the script each time we wish to make a change). Each time this happens, it deletes all of the existing tasks and creates new ones. I don't know what else to try.... but surely there is some way to "reset" the task scheduler... How can I stop this error from happening.

    Read the article

  • Google privacy concerns: trustworthy alternatives for migration?

    - by Markos Fragkakis
    I have come to realize the tremendous amount of information Google has on its users. I am a typical Google user, using Gmail, Google Reader. This means that right now Google now has the following information at its disposal: Who my friends are (Gmail) What we talk about (Gmail, Google Talk) What news sources I follow (Google Reader) How frequently I check them and which ones I consider important enough to share (Google Reader) A lot of other stuff What I search about and when (if I search when logged in) (Web search) I have no reason to believe that this information is used for reasons other than adjusting what ads I am displayed when I visit a site with Google Ads. However, I have realised that I am in no position to be certain that this is absolutely true, or that it always will be. On the other hand, I don't want to reach the uber-privacy-maniac state of maintaining my own email server and installing a desktop RSS reader in all my machines. So, I am asking for your opinions: What services constitute a good set of alternatives to the Google services, promising better privacy? Pros: Privacy Free Powerful Usable

    Read the article

  • Can't login to Manager App in Tomcat 6.0.18

    - by Rafael Almeida
    Folks, I can't login to the manager app (localhost:8080/manager/html) in my Tomcat. More specifically, it asks for my username and password, and the ones supposed to be correct aren't accepted. Here's what I already checked: I tried editing my conf/tomcat-users.xml to add my user/role. Here's the current content of this file: <?xml version='1.0' encoding='utf-8'?> <tomcat-users> <role rolename="manager"/> <user username="tomcat" password="s3cret" roles="manager"/> </tomcat-users> I thought that maybe it wasn't looking up on this XML, but elsewhere. So, I came to know about Realms. The Realm part of my configuration is now: < Realm className="org.apache.catalina.realm.MemoryRealm" / ( please ignore the space before Realm, for some reason this site isn't accepting the literal tag ) What am I missing?

    Read the article

  • Software to consolidate contacts from multiple sources?

    - by Neil
    I'm looking for an app that can take my contacts from Gmail, Facebook, and my mobile phone, to come up with one consolidated address book that, for each contact, contains the name, email address, facebook username, and mobile number, and if possible, export this data to the Mac Address Book. Is there any app that can do this? Online or offline will do. Currently, I've been only able to find apps that need to be hosted on my own server, such as the ones below. Isn't there any standalone desktop or web app? knowee[dot]net/ noserub[dot]com/ diso-project[dot]org/

    Read the article

  • Linksys WRT54GC v2.0 - all connection lights flashing

    - by JC Denton
    I have just received a Linksys WRT54GC router of a friend. Apperantly it has stopped working. All lights on it are flashing apart from the power and wireless light. I have read of similar issues online but not ones describing the same set of lights flashing. I have tried connecting to the device over ethernet but failed. It's no longer accessible over wireless either. I've also tried to run the linksys utility on the cd but it failed to detect the presence of the device (attempted over ethernet, firewall switched off). I've tried pressing the reset button for 30 seconds and disconnection the power cable for 30 seconds but to no avail. Thanks for any thoughts

    Read the article

  • Tokyo Tyrant ulog / update log management.

    - by Nathan Milford
    I'm testing Tokyo Tyrant in a master-master setup and have found the ulog grows out of control and locks up the disk. At first I found the -ulim option useful and limited the logfile size, however it simply rolls over to a new log, leaving the old ones to clutter up the partition. I suppose I'll write a shell script that will delete ulogs older than X, once I find out how far back Tokyo Tyrant needs in the update log in order to failover. Does anyone have any experience with this Tokyo Tyrant? Do you have a feel (acknowledging that every install is different based on what is being stored) for the optimal ulog size vs how far back a Tokyo Tyrant instance needs to look in the ulog to assume master status? Thanks, nathan

    Read the article

  • Remote Desktop closes with Fatal Error (Error Code: 5)

    - by Swinders
    We have one PC (Windows XP SP3) that we can not log onto using a Remote Desktop session. Logging on to the PC directly (sitting in front of it using the connected keyboard and monitor) work fine. From a second PC (tried a number of different ones but all Windows XP SP3) I run 'mstsc' and type in PC name to connect to. This shows the login box which we can enter the correct login details and click OK. Within a few second we get an error: Title: Fatal Error (Error Code:5) Error: Your Remote Desktop session is about to end. This computer might be low on virtual memory. Close your other programs, and then try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support. None of the computers we are using are low on memory (2Gb+) and we let windows manage the virtual memory side of things. We do not see this with any other PC and do use Remote Desktop in meeting rooms to connect to user PCs with no problems.

    Read the article

  • Do all Mac OS X applications require Admin permissions to 'install'?

    - by Andy
    I'm new to the whole Mac OS X operating system. I'm trying to learn and I've got myself a MacBook running Mac OS X 10.7.3. I've created a test user that can not administrate so that I can test out permissions and I've found that I can not do anything in the Applications folder, which includes 'installing' applications (even those drag 'n' drop ones) and creating folders, without entering an Admin name and password. However, I was under the impression that this wasn't the case and you only needed Admin permissions to write to somewhere like Preferences, so can somebody please clarify why it is asking for Admin when I try to drag 'n' drop applications into the Applications folder.

    Read the article

  • Samsung 530U3C clean system installation

    - by user1292810
    I have bought Samsung 530U3C notebook with i5-3317/12GB RAM/500GB HDD/24GB ExpressCache/Windows 8 preinstalled. I would like to install my own clean version of Win8. But I would like to preserve recovery partition. I will sell this laptop in probably 1-1.5 year and I would like to be able to restore settings to factory ones. What is more, in the future I would like to install Ubuntu as well, but Windows goes first. At the moment discs and partitions looks like below (sorry for non English screen): http://i.stack.imgur.com/p4W6t.jpg DISC 0: 500MB - recovery partition 300MB - system partition 442.22GB - Drive C: - Boot, Page File, Crash Dump, Primary partition 21.64GB - recovery partition 1.00GB - recovery partition DISC 1: 9.00GB - primary partition 13.24GB - primary partition Which partitions can I format and which of them should I preserve? Can I format and merge partitions from that 24GB ExpressCache and install Windows on it?

    Read the article

  • CPU Usage at 100% with "Hardware Interrupts"

    - by eventualEntropy
    After turning on my desktop one day, I found that my CPU usage was maxed out at 100%, with 99% of that going to hardware "Interrupts". I tried to enable/disable all my devices one by one through the device manager, and found that I could get the CPU usage used by the Interrupts down to 50% by disabling all devices labelled "USB Host Controller" (except the ones for the mouse/keyboard). I found that I also got 10-20% more from disabling "High Definition Audio Controller". Following the tutorial at: http://www.msfn.org/board/topic/140263-how-to-get-the-cause-of-high-cpu-usage-by-dpc-interrupt/ Led me to similar conclusions (that is, that the culprit is mostly "USB Host Controller"): I've tried updating my asus motherboard driver and my video card driver. This is on Windows 7 64 bit. I've spent hours trying to figure this out and I'm running out of ideas short of formatting (which might still not fix it!).

    Read the article

  • Software Router: pfSense or Vyatta ?

    - by Kedare
    Hello, I'm rebuilding my home network and I am look to an alternative to the very expensives Cisco. So I take a lookt at the software routers, I've found Vyatta and pfSense. I have tested both and I find both great, but I don't know which one to choose. I need a router software that : Supports IPv6 (both do with pfSense 2 RC1) Allows me to join an OpenVPN Network Is free Configurable by CLI (WebGUI is a plus) After some testing, it looks like both a very featured, but Vyatta looks more CLI-centric where pfSense looks more WebGUI-centric. Which do you recommend me ? Why ? Is there any limitations on the free version of Vyatta ? I would like to run it on a small box like Soekris ones, it that possible ? (pfSense will run it, but I'm not sure with Vyatta) Thank you

    Read the article

  • OSX pdf-kit vs Linux poppler or pdf/x

    - by Tahnoon Pasha
    I keep reading and hearing that the reason that there is no good pdf editing software for Linux is that the libraries are not as well developed. That is why there is no equivalent for Skim or Preview in Linux. I had a look a the pdf-kit documentation and the poppler documentation and they looked very similar to my admittedly non-technical view. Could someone explain to me why the OSX libraries (eg) are so much easier to write projects like Skim in than the linux ones. I'm not sure if the same applies to OSX projects to NVAlt, but it seems to be a common theme - I'd just like to understand what is behind the thesis that OSX is easier to code these projects in, and what would be involved in changing it. (I'm not disputing the value of Okular or Evince and the like, just noting that they don't have the richness of functionality of Skim, Preview or even things like Goodreader on the Ipad).

    Read the article

  • mod_fcgid process doesn't respawn

    - by aaronsw
    I have a Python script running on my server as a FastCGI using Apache2 and mod_fcgid. I let it spawn up to five processes. But I soon get messages like these in the Apache logs: [Wed Sep 02 23:16:34 2009] [warn] (103)Software caused connection abort: mod_fcgid: ap_pass_brigade failed in handle_request function [Wed Sep 02 23:16:35 2009] [warn] (103)Software caused connection abort: mod_fcgid: ap_pass_brigade failed in handle_request function and then Apache doesn't seem to recognize that all its processes are dead (I have a max of 5 backends) and refuses to spawn new ones: [Wed Sep 02 23:26:16 2009] [notice] mod_fcgid: /var/www/hacks.og.theinfo.org/picker.fcgi total process count 5 >= 5, skip the spawn request [Wed Sep 02 23:26:17 2009] [notice] mod_fcgid: /var/www/hacks.og.theinfo.org/picker.fcgi total process count 5 >= 5, skip the spawn request at which point it refuses to respond to requests from the outside world. This doesn't seem to happen with my other FastCGIs, which all use the same Apache config: <IfModule mod_fcgid.c> AddHandler fcgid-script .fcgi IPCConnectTimeout 20 MaxProcessCount 5 DefaultMaxClassProcessCount 2 DefaultMinClassProcessCount 1 </IfModule> Any idea what causes it?

    Read the article

  • Is there a Firefox or Chrome plugin, or a standalone program, for monitoring site usage and search queries?

    - by Leigh Caldwell
    I'm running some research on how people search the web for specific types of information. I'd like to be able to set them up with a laptop and browser and then record a history of what they search for and what sites they visit. A Firefox or Chrome plugin would be ideal, but a standalone program is fine too. It doesn't need to be free, just quick and reliable. It doesn't need to be a general PC monitoring program (though that would be OK too) - it's only Web usage I need to track. I've found a few on the Web but am not sure which ones to trust. Your recommendations would be much appreciated.

    Read the article

  • Self-powered USB hub and power supply adapter ampere capacity

    - by galacticninja
    I am looking for a power supply adapter for my USB Hub so it can support at least 2 bus-powered external hard drives. The hub's rating is 5 volts, 2 amperes. I would like to know if it would be OK to buy a power supply adapter rated at less than 2A. I've been looking for power supply adapters and the ones that do support 2A are more expensive (more expensive than the USB hub itself) compared to those that support less than 2A. Will power supply adapter that supports less than 2A (~1-1.5A) work fine to support two external hard drives? The external hard drives are both bus-powered Western Digital My Passport Essentials 250 GB. The OS is Windows XP SP3.

    Read the article

  • ERROR 0x8007007A when trying to schedule a task

    - by Paul Hollingsworth
    I am getting the error "The data area passed to a system call is too small. (Exception from HRESULT: 0x8007007A)" when trying to create a scheduled task on a particular windows machine. The problem description is identical to that described in this Microsoft KB article I followed their steps to resolve: Stopped the task scheduler service (right-clicked "Task Scheduler" in the Services window from Control Panel and selected "Stop"). Restarted the task scheduler service Waited 15 minutes tried to schedule the task. But the error is persisting. To give more context of how we are creating these scheduled tasks, they are actually generated automatically from a configuration script (we run the script each time we wish to make a change). Each time this happens, it deletes all of the existing tasks and creates new ones. I don't know what else to try.... but surely there is some way to "reset" the task scheduler... How can I stop this error from happening.

    Read the article

  • Bluehost: 1 Minute Delays?

    - by feklee
    On Bluehost shared hosting (Apache 2.2 + FastCGI + APC), I have the problem that some requests take almost exactly one minute to respond. Yet time spent in PHP is only two seconds. To demonstrate the issue, I created a temporary test page. Sample output: When asking Bluehost support about the issue, I got the following reply: “the fastcgi process don't stay running they will only stay running for a certan period which would explain the timeouts you are seeing it traffic would spawn new ones. [...]” I understand that spawning new FastCGI processes takes some time. But almost exactly one minute? That must be some timeout. But which timeout may that be? What I want in the end: No request should take longer than five seconds to respond, even if it fails. When I asked Bluehost support to set the Apache TimeOut directive accordingly, they told me: “we do not modify the Apache Config File even on a virtual host level.”

    Read the article

  • Emulating old-school sprite flickering (theory and concept)

    - by Jeffrey Kern
    I'm trying to develop an oldschool NES-style video game, with sprite flickering and graphical slowdown. I've been thinking of what type of logic I should use to enable such effects. I have to consider the following restrictions if I want to go old-school NES style: No more than 64 sprites on the screen at a time No more than 8 sprites per scanline, or for each line on the Y axis If there is too much action going on the screen, the system freezes the image for a frame to let the processor catch up with the action From what I've read up, if there were more than 64 sprites on the screen, the developer would only draw high-priority sprites while ignoring low-priority ones. They could also alternate, drawing each even numbered sprite on opposite frames from odd numbered ones. The scanline issue is interesting. From my testing, it is impossible to get good speed on the XBOX 360 XNA framework by drawing sprites pixel-by-pixel, like the NES did. This is why in old-school games, if there were too many sprites on a single line, some would appear if they were cut in half. For all purposes for this project, I'm making scanlines be 8 pixels tall, and grouping the sprites together per scanline by their Y positioning. So, dumbed down I need to come up with a solution that.... 64 sprites on screen at once 8 sprites per 'scanline' Can draw sprites based on priority Can alternate between sprites per frame Emulate slowdown Here is my current theory First and foremost, a fundamental idea I came up with is addressing sprite priority. Assuming values between 0-255 (0 being low), I can assign sprites priority levels, for instance: 0 to 63 being low 63 to 127 being medium 128 to 191 being high 192 to 255 being maximum Within my data files, I can assign each sprite to be a certain priority. When the parent object is created, the sprite would randomly get assigned a number between its designated range. I would then draw sprites in order from high to low, with the end goal of drawing every sprite. Now, when a sprite gets drawn in a frame, I would then randomly generate it a new priority value within its initial priority level. However, if a sprite doesn't get drawn in a frame, I could add 32 to its current priority. For example, if the system can only draw sprites down to a priority level of 135, a sprite with an initial priority of 45 could then be drawn after 3 frames of not being drawn (45+32+32+32=141) This would, in theory, allow sprites to alternate frames, allow priority levels, and limit sprites to 64 per screen. Now, the interesting question is how do I limit sprites to only 8 per scanline? I'm thinking that if I'm sorting the sprites high-priority to low-priority, iterate through the loop until I've hit 64 sprites drawn. However, I shouldn't just take the first 64 sprites in the list. Before drawing each sprite, I could check to see how many sprites were drawn in it's respective scanline via counter variables . For example: Y-values between 0 to 7 belong to Scanline 0, scanlineCount[0] = 0 Y-values between 8 to 15 belong to Scanline 1, scanlineCount[1] = 0 etc. I could reset the values per scanline for every frame drawn. While going down the sprite list, add 1 to the scanline's respective counter if a sprite gets drawn in that scanline. If it equals 8, don't draw that sprite and go to the sprite with the next lowest priority. SLOWDOWN The last thing I need to do is emulate slowdown. My initial idea was that if I'm drawing 64 sprites per frame and there's still more sprites that need to be drawn, I could pause the rendering by 16ms or so. However, in the NES games I've played, sometimes there's slowdown if there's not any sprite flickering going on whereas the game moves beautifully even if there is some sprite flickering. Perhaps give a value to each object that uses sprites on the screen (like the priority values above), and if the combined values of all objects w/ sprites surpass a threshold, introduce the sprite flickering? IN CONCLUSION... Does everything I wrote actually sound legitimate and could work, or is it a pipe dream? What improvements can you all possibly think with this game programming theory of mine?

    Read the article

  • Wireless Bridge with NetGear and TP-Link

    - by Tiago Cruz
    I have a wireless NetGear WGR614 v7 (little old) router connected to the internet, but I can't get a good signal in the other end of my house. I have another new one, model TP-Link TL-WR941ND wireless router. I was able to do the stuff works using a wired cable, but now, I would like to do the same using wireless connections (bridge mode, some like WDS?) Now, the computer connected to TP LINK was able to ping my computer connected to NETGEAR, but we cannot go IP ADDRESS outside my network, only internals ones. What can I do to configure this? Is needed that BOTH wireless routers support BRIDGE mode or only one its good enough? Thanks a lot!!

    Read the article

  • Version `GLIBCXX_3.4.15' not found in CentOS (in file /usr/lib/libstdc++.so.6)

    - by George Kastrinis
    I try to use a program and I get the following error. /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.15' not found Under /usr/lib64 the libstdc++ I see is libstdc++.so.6.0.13 (and a soft link). With strings libstdc++.so.6.0.13 | grep GLIBCXX I get GLIBCXX_3.4 GLIBCXX_3.4.1 GLIBCXX_3.4.2 GLIBCXX_3.4.3 GLIBCXX_3.4.4 GLIBCXX_3.4.5 GLIBCXX_3.4.6 GLIBCXX_3.4.7 GLIBCXX_3.4.8 GLIBCXX_3.4.9 GLIBCXX_3.4.10 GLIBCXX_3.4.11 GLIBCXX_3.4.12 GLIBCXX_3.4.13 GLIBCXX_FORCE_NEW GLIBCXX_DEBUG_MESSAGE_LENGTH With cat /etc/redhat-release I get Red Hat Enterprise Linux Workstation release 6.4 (Santiago) So the question in what should I do in order to fix that. Should I install some new packages and if yes which ones?

    Read the article

  • Recovering/Rebuilding MySQL .FRM, .MY* files from IBDATA1

    - by Synetech
    I recently had an incident in which several MySQL files were wiped out (mostly from WordPress, but also a few of MySQL’s own files). The IBDATA1 file is unaffected, but several .frm are gone as are a few .myi and .myd files. So now I need to find out if there is a way to rebuild the missing files from IBDATA1. I tried Googling it, assuming that such an issue has come up before, and indeed there were numerous search results (including this question), but all of the ones I looked at were the opposite, about recovering from .frm and .my* files or somehow required these files. Is there a way to rebuild these files? I know I have a relatively recent backup (a .SQL file) if there isn’t, but I’m hoping that these are the kind of files that are rebuilt if missing or outdated.

    Read the article

  • Set Error-Pages for all Applications in Tomcat

    - by user38511
    I'm trying to set up custom error pages in tomcat 6, because I don't want the default ones to show up. My error pages are static html, no jsp or anything dynamic. I know how to do this through the web.xml in each application but I'd prefere to setup the error pages only once for the entire server. I tried to add the following fragment to the global web.xml (in conf), but no matter what I add under location, it does not show. <error-page> <error-code>404</error-code> <location>/404.html</location> </error-page> What do I need to do to gobally define custom error pages? Thanks!

    Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >