Search Results

Search found 4109 results on 165 pages for 'plan'.

Page 77/165 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

• plugging in a 3.3V 50pin laptop HDD to USB?

  - by barlop

  I have a 50pin laptop hard drive. 1.8" wide. This 50pin connector concerns me.. Even if I get an adaptor, How can I know which side of the connector takes the power? I don't want to plug it in the wrong way. And I don't have n adaptor.. Could people link me to adaptors too. but main question is, which side to plug it in when I get the adaptor. I want to be sure. I do not want to blow the hdd. For the 3.3V I have a plan. Connecting green and black and using the orange cable(3.3v) to feed power. I am not too worried about that bit. But as I said.. Main thing is I want to know which side is 3.3V hard drive is MK6006GAH

  Read the article

• 2 DSL lines...any benefit?

  - by EJB

  I have verizon DSL in my office, I put DSL in about a year ago for $29.95 month...I added a new phone line recently and it was cheaper to actually get it bundled with DSL so now I have two DSL lines...my plan was to shut the first one off when my 1 year contract comes up (in September). A couple of times DSL has gone out on one line so I just used the other, which is a nice redundancy to have - but it doesn't happen often. (I unplugged one line and plugged in the other) Question is, is there any way to use both DSL lines together so that 1) I can increase bandwidth and effective speed might increase (is that possible?) or 2) have them both on and connected someway so that traffic on my network would just use either one, and if one went down the traffic would route automatically? If I can either increase speed by having two, or at a minimum get some automatic redundancy, I see no reason to keep both on.... Thanks!

  Read the article

• 5 x 3GB drives and 4 x 1500GB drive best raid setup?

  - by Zen_Silence

  Hello, I am building a file server my plan is the have the Operating system on one raid partition and the data storage on another partition. I currently have 5 x 3GB IDE drives that i would like to put the operating system on theses drives are old but that doesnt matter to me at the moment i have a ton of them so for this raid partition i would probably want to be able to pull out dead a drive and rebuild the array. My file partition is going to consist of 4 x 1.5TB SATA drives I would like the maximum storage with some redundancy. Any suggestions to which Raid level i should use would be greatly appreciated and if you could also suggest a PCI or PCI-e raid controller to handle theses arrays. Thanks in Advance, Zen_Silence

  Read the article

• Will my RAID0 stay intact when I move it to a new computer?

  - by Jeremy H

  My primary drive is a 250GB WD SATA drive. So, I added 2x 500GB 7,200 RPM WD SATA drives into my Windows Vista box and created a 1TB RAID0. I then formatted the the primary drive and installed Windows 7. To my pleasant surprise when I booted into Windows 7 my RAID0 was still intact and I kept trotting along the same as I did before. Now I am replacing my motherboard, processor, and RAM and plan on formatting the primary 250GB drive again and using it to boot for a new clean install of Windows 7. My question is: if I move these two SATA drives which are setup for RAID0 into the new system, install Windows 7 again, will the RAID0 remain? Edit: Software RAID. I created it within Windows. The RAID0 does NOT contain the system boot partition.

  Read the article

• Query Performance Degrades with High Number of Logical Reads

  - by electricsk8

  I'm using Confio Ignite8 to derive this information, and monitor waits. I have one query that runs frequently, and I notice that on some days there is an extremely high number of logical reads incurred, +300,000,000 for 91,000 executions. On a good day, the logical reads are much lower, 18,000,000 for 94,000 executions. The execution plan for the query utilizes clustered index seeks, and is below. StmtText |--Nested Loops(Inner Join, OUTER REFERENCES:([f].[ParentId])) |--Clustered Index Seek(OBJECT:([StructuredFN].[dbo].[Folder].[PK_Folders] AS [f]), SEEK:([f].[FolderId]=(8125)), WHERE:([StructuredFN].[dbo].[Folder].[DealId] as [f].[DealId]=(300)) ORDERED FORWARD) |--Clustered Index Seek(OBJECT:([StructuredFN].[dbo].[Folder].[PK_Folders] AS [p]), SEEK:([p].[FolderId]=[StructuredFN].[dbo].[Folder].[ParentId] as [f].[ParentId]), WHERE:([StructuredFN].[dbo].[Folder].[DealId] as [p].[DealId]=(300)) ORDERED FORWARD) Output from showstatistics io ... Table 'Folder'. Scan count 0, logical reads 4, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Any ideas on how to troubleshoot where these high logical reads come from on certain days, and others nothing?

  Read the article

• SIP Service to record all calls?

  - by TK Kocheran

  I read an article that I can't find at the moment which detailed a way to have Google Voice point to a SIP phone number which forwards to your phone in order to take advantage of the SIP service in order to Have all calls use a data connection = no usage of cell-phone plan minutes. Record each and every conversation.* I really want to be able to accomplish this, primarily issue number 2, as all of the phone recorder tools in the Android Market essentially don't work for my Nexus One. I figure that I have one of two options with this. I could 1) use an existing (hopefully free) service which will do this for me or 2) I could set up a SIP service at my home. to somehow forward calls through my home server which will record the calls as well as forward calls to my cell phone. Obviously, the path of least resistance is the one I'd like to go down. Can anyone help me out with this? * I do understand that the legality of this varies from state to state here in the US.

  Read the article

• How to share datastores between multiple exchange servers?

  - by Johan

  I have an Exchange 2003 box that is seriously overstressed. I want to transfer its duties to a new and faster box. I don't cannot suffer downtime, so I have to do this stuff live. Here's what I plan to do: Install Exchange 2003 on the new server Set up the new server, so it will accept requests from users for their mailboxes I want to do as little manual set up as possible, because that 'll eat up my time and is too error prone Than I want to transfer my datastores one by one to the new server and have those users (once the datastore in the new server is up and running) to get their data from the new server (without them noticing) I don't have to transfer all the datastores, some of them need to stay on the old box (because I'm still waiting for extra HD space to arrive from the supplier) What steps do I need to follow to do this? The new box has never seen this domain before, the old exchange server is not the DC, we have a dedicated DC.

  Read the article

• Is it possible to COMPLETELY replace the start menu?

  - by Subaru Tashiro

  I plan to make a replacement for the Windows 7 start menu, and I would like to know if that's even possible. I understand that the start menu is part of explorer.exe but I do not intend to replace explorer.exe. Is it possible to launch the replacement start menu by clicking the native start orb? Is it also possible to launch the replacement by pressing the Windows key or ctrl+esc ? Is the Windows key a macro for ctrl+esc ? or is it two different hotkeys that do the same thing? May I know if there is any software that do any one of these things?

  Read the article

• Recoomend company to take care or webserver and wordpress management?

  - by javipas

  I'm interested in setting up a professional WordPress site but I'd like to explore the pssibilities to leave the management of the webserver and even WordPress' management to a company that guarantees great availability, performance of the site (load times, security) and even SEO. My site is currently running on other platform but I plan on a migration on the next 4 weeks. I've done this usually, but I'd like to focus on the content, so I don't have to mess with webserver/mysql/php configs in order to get nice performance. Is there some (maybe hosting) company that is dedicated to this? Would it be better to hire a sysadmin with experience in those matters?

  Read the article

• Load balanced proxies to avoid an API request limit

  - by ClickClickClick

  There is a certain API out there which limits the number of requests per day per IP. My plan is to create a bunch of EC2 instances with elastic IPs to sidestep the limitation. I'm familiar with EC2 and am just interested in the configuration of the proxies and a software load balancer. I think I want to run a simple TCP Proxy on each instance and a software load balancer on the machine I will be requesting from. Something that allows the following to return a response from a different IP (round robin, availability, doesn't really matter..) eg. curl http://www.bbc.co.uk -x http://myproxyloadbalancer:port Could anyone recommend a combination of software or even a link to an article that details a pleasing way to pull it off? (My client won't be curl but is proxy aware.. I'll be making the requests from a Ruby script..)

  Read the article

• Windows 8 Metro/Modern Start Screen with Multiple Monitors -- Keep it always maximized?

  - by Jersey Dude

  Before installing Win 8 today, my plan was to keep the Metro UI up on my smaller, laptop monitor and have the classic UI running on my two larger monitors. However, in reality, as soon as I click on something in one of the classic UI monitors, the Metro UI minimizes (thus exposing the classic UI in its place). Is there any way to keep the Metro UI from minimizing when I do something in another monitor? Oddly enough, if there is an app running/suspended in the Metro Window, then the Metro UI is not minimized. If the Start screen is currently viewed, clicking in a classic window/monitor switches the Metro UI from the start screen to the last run app. Very peculiar..

  Read the article

• MDT Image Hierarchy

  - by Antix

  Just a quick question, I couldn't find this out by looking around and have not had the time to run a test myself: Is it possible to create image hierarchies in MDT? Take this example where we have three images. - Image 1: Base OS - Image 2: Company Wide Applications (built off Image 1) - Image 3: Specific Role Applications (built off Image 2) Now just say we change the version of an application in Image 2. The next time we build Image 3, will this take the new version of the application since it's basing its image off Image 2? Also, If we add a program to Image 1, leave Image 2 unchanged and re-build Image 3, would this include the new program? I'm trying to plan out a way of creating images such that if a change is required for an image that is on basically every machine (think, Image 1) then we only have to change it in one location. Has anyone actually done something like this and has any tips?

  Read the article

• Cannot download or send MMS

  - by CGFoX

  I have a Huawei Honor with Android 4.0.3. I got a plan at AT&T that includes 200 messages (both SMS and MMS) per month. Unfortunately I can neither receive nor send MMS. When I receive one, there's a download-button. But when I hit download it doesn't do anything, even when I got internet connection via wifi. When I try to send a MMS it only says "sending...", but nothing happens. My guess is that I didn't configure the settings correctly, but I couldn't find anything useful online. Also I don't have a single APN. Maybe I need to create one? Thanks for your help!

  Read the article

• How to step down voltage from 208V to 110V

  - by Eric Dennis

  I have some racks that will be fed by 208V/20A circuits. These circuits will be conditioned and battery-backed by the facility in which these racks will live. 99% of the devices in the rack will be able to support 208V input, so I plan to use these PDUs. However, there may be one or two odd devices that will need 110V input. I know that I can use a step-down transformer to provide 110V for these devices, but that seems like overkill for such a small number of devices, plus I don't want to pay extra for the UPS functionality since my power will already be battery-backed. Any suggestions for something I can use for these one-off 110V devices?

  Read the article

• ATI Radeon Drivers works with which linux distribution and version? [closed]

  - by amit.codename13

  I have ATI Mobility Radeon HD 5850 graphics card. Almost every new linux distribution seems to have an issue with it, when i install the drivers. Working without utilizing the graphics card leaves me so unproductive. So i made a plan to use older versions of linux, any distribution suitable as a desktop distribution. The problems that i am facing are, 1) After installing drivers the system boots and hangs, 2) There are unusual lines over the screen 3) After upgrade system doesn't start properly(hangs the usual old way) The kind of answers i am looking for is, distribution X(the newer the version the better) doesn't have the above problem after installing drivers for ATI Mobility Radeon HD 5850 graphics card. UPDATE: The new drivers released by AMD seems to fix all the issues, although they are still beta

  Read the article

• Is there a filesystem that is "friendly" to both windows and Linux?

  - by Somebody still uses you MS-DOS

  I'm planning to install Ubuntu 10.04 with Windows 7. (I'm new to Linux, have to use at work so I'm planning to install it at home to learn more) I plan to use a partition to my Windows system files (C:), a partition for my personal files that already exists (D:) and a new partition for Linux. What I want is to have a partition for my personal files that works across these systems - so, if I start with Windows or Linux, there's the same "Videos", "Pictures", "Projects" folders. Is it possible? Is there a hd filesystem capable of having writes from both systems without too much risk of corrupting or something? (Can't be FAT32, I need to store 4gb files). I've read some horror stories of corruption, and would like to know from a sysadmin POV all the risks involved in such scenario.

  Read the article

• Is there a filesystem that is "friendly" to both windows and Linux?

  - by Somebody still uses you MS-DOS

  I'm planning to install Ubuntu 10.04 with Windows 7. (I'm new to Linux, have to use at work so I'm planning to install it at home to learn more) I plan to use a partition to my Windows system files (C:), a partition for my personal files that already exists (D:) and a new partition for Linux. What I want is to have a partition for my personal files that works across these systems - so, if I start with Windows or Linux, there's the same "Videos", "Pictures", "Projects" folders. Is it possible? Is there a hd filesystem capable of having writes from both systems without too much risk of corrupting or something?

  Read the article

• Compaq Presario Laptop Monitor Problems

  - by Nishant

  I am attaching a few pics of my laptop monitor now . Can you please tell me if this is a hardware error which can be rectified by replacing the monitor ? How this happened - I accidently hit my leg on the laptop and jammed it against the wall and ever since the monitor is like this .I plan to replace the Monitor by buying a spare parts laptop that sells in ebay . I wonder if this is a LCD HARDWARE problem or problem with the cable that goes to the monitor . THE OS works fine in the computer .I hope my question is clear . http://img163.imageshack.us/gal.php?g=good1z.jpg

  Read the article

• Should we install the OS on an SSD or not when running virtual machines?

  - by Raghu Dodda

  I have a new Dell Mobile Precision M6500 laptop with 8 GB RAM. it has two hard drives - 500 GB @7200 RPM and a 128 GB SSD. The main purpose of these laptop is software development in virtual machines. The plan is to install the base OS (Windows 7) and all the programs in the 500 GB drive, and let the SSD only contain the virtual machine images. It is my understanding that the we get most performance from the virtual machines if the images are on a separate hard drive than the base OS. Is this the way to go, or should I install the OS on the SSD as well? What are the pros and cons? The virtual machine images would be between 20 - 30 GB, and I might run 1 or 2 at a time.

  Read the article

• In BASH, are wildcard expansions guaranteed to be in order?

  - by ArtB

  Is the expansion of a wildcard in BASH guaranteed to be in alphabetical order? I forced to split a large file into [10Mb pieces][1] so that they can be be accepted by my Mercurial repository. So I was thinking I could use: split -b 10485760 Big.file BigFilePiece. and then in place of: cat BigFile | bigFileProcessor I could do: cat BigFilePiece.* | bigFileProcessor In its place. However, I could not find anywhere that guaranteed that the expansion of the asterisk (aka wildcard, aka '*' ) would always be in alphabetical order so that .aa came before .ab ( as opposed to be timestamp ordering or something like that ). Also, are there any flaws in my plan? How great is the performance cost of cating the file together?

  Read the article

• 64 bit Windows 7 + 32 bit windows XP dual boot?

  - by Mick

  I have purchased an i7 based PC pre-installed with 64 bit windows 7 (home premium). Unfortunately some third party 32 bit software that I need to use is not working properly (see stackoverflow.com for details). I am now torn between the plan of installing windows XP 32 bit or making it dual boot. Which option do you think will give me the least problems? And if the answer is dual boot, then can you point me to a good guide for how to do it, preferably a guide specifically for my two OS's created in this order (i.e. 7x64 first). EDIT: the performance of my 32bit programs is critical so am concerned about any kind of 32bit XP "emulation".

  Read the article

• Running commands on FreeBSD Live CD

  - by jmc

  I'm running FreeBSD 9.1-PRERELEASE on a vps running on XEN virtualization, I tried to update it to 9.1-RELEASE but mergemaster toasted my /etc/master.passwd and /etc/passwd so what i have now is a blank copies of the two files. What i did is use a mounted Live CD and mount my root partition to /mnt and manually re listed every entry to /mnt/etc/master.passwd and /mnt/etc/passwd from another freebsd server. I believe that everytime you edit master.passwd and passwd you have to run pwd_mkdb but this gives me "Read Only File" error. What I plan to do is enable PermitRootLogin and PermitEmptyPassword first so I can login as root first before I redo necessary changes again. But i have to run pwd_mkdb, so is there a way to run this command from Live CD?

  Read the article

• More than one XP Mode virtual machines okay under Win 7?

  - by kousen

  I really like the Windows XP Mode virtual machine that comes with Windows 7 (once you download the integration components). I teach technical training classes, and having a machine configured for the classroom is very helpful. My question is, can I configure more than one? The documentation suggests you can make multiple virtual machines, but I can't tell if I can have multiple "Windows XP Mode" VMs. It can't be as simple as configuring one, then just making a copy of the primary disk file, could it? I only plan to run one at a time, but I'd like to configure multiple different VMs for different classes, all running XP if possible. Thanks for any help!

  Read the article

• Prevent Windows 7 from unpluging External HDD [migrated]

  - by marverix

  I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

  Read the article

• Exchange 07 to 07 mailbox migration using local continuous replication

  - by tacos_tacos_tacos

  I have an existing Exchange Server ex0 and a fresh Exchange Server ex1, both 2007SP3. The servers are in different sites so users cannot access mailboxes on ex1 as from my understanding, a standalone CAS is required for this. I am thinking of doing the following: Enable local continous replication of the storage group on ex0 to a mapped drive that points to the corresponding storage group folder on ex1 At some point when the replication is done (small number of users and volume of mail), say on a late night on the weekend, disable CAS on ex0 (or otherwise redirect requests on the server-side from ex0 to ex1) AND change the public DNS name of the CAS so that it points to ex1. Will my plan work? If not, please explain what I can do to fix it.

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >