Search Results

Search found 3018 results on 121 pages for 'plug in'.

Page 77/121 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

• Maximum 5 minute battery life with Ubuntu 11.10 on HP laptop

  - by JamesG

  I apologise if this question is too similar to the numerous others already asked, but it seems that my difference in battery life is significantly more noticeable than others that have been reported. I recently installed Ubuntu 11.10 on my HP Pavilion dv6 laptop (which I purchased brand new just under one year ago). When running Windows 7 on this laptop, I have been able to get up to two and a half to three hours of battery life with wireless disabled and when running only Microsoft Word. However, when running Ubuntu, I am unable to use the laptop if it is not plugged in. Upon unplugging the fully-charged machine from the power cord, if I have wireless enabled, I immediately receive a notification that the battery levels are critically low and that shutdown is imminent. Even if I replace the power plug, the laptop shuts down within thirty seconds. If I disable wireless capability, I am able to run the laptop for an absolute maximum of five minutes on battery powers before receiving the same message. I have tried running with Jupiter on Power Saver mode, but to no noticeable effect. Ignoring the fact that I can't use my laptop without being attached to a power source, I really do enjoy using Ubuntu, and hence would greatly appreciate any help that can be offered.

  Read the article

• What is the basic loadout for an open source web developer?

  - by DeveloperDon

  Thus far, I have mainly been an embedded developer, but I am interested in having the flexibility to do mobile and web development as well. I think my tools should include the following, but probably a lot more. LAMP stack. Java IDEs like Eclipse and IntelliJ. JS frameworks like Dojo, Node.JS, AngularJS, (is it better to mix or commit to one?). Cloud solutions like EC2 and Azure (again, ok to mix or better to commit to one?). Google APIs. Continuous integration server. Source control tools with Git for new work, SVN, CVS, +others for imports. FTP server. Unit test runners. Bug trackers. OOAD modeling tools or plug-ins? Graphic design tools? Hosting services. XML / JSON / other markup? Content management, SEO? I am also interested to know if there are tools where it might be better to mix, match, or support all available (maybe for source control) and others where the full focus should be on one (maybe Java vs. C# or Windows vs. Linux vs. MacOS). Perhaps some of these questions need context of whether the projects will be greenfield (just pick favorite) or maintenance (no choice, each project continues legacy, sometimes with a poor tools).

  Read the article

• How can i get my KVM switch to work? (win7 & ubuntu 10.10)

  - by Will W.

  i bought a KVM switch and i'm trying to use it to have it connected to my main PC (win7) and my new machine i just installed ubuntu on. I hooked it up properly, and tried using it. It worked when switching from the win7 machine to the ubuntu one, but after the (1st and only) successful switch, ubuntu just didn't seem to recognize my mouse or keyboard. Basically when i tried it the easiest was to explain what happened was it only worked with Win7. When i switched over to ubuntu by doing a [scroll-lock] [scroll-lock], my keyboard and mouse were not recognized. However, the lights on the keyboard and mouse did work when on ubuntu, but they didn't function, and since keyboard wouldn't function, i couldn't do a [scroll-lock] [scroll-lock] to switch back to the win7 machine. So i was basically locked in to ubuntu with no mouse or keyboard, and i had to unplug the keyboard/mouse usb's and d-sub to plug the monitor d-sub back into win7 computer to type up this thread and google the issue. Seems some people have had this issue before but i couldn't find a fix... I am 80% sure it has to do with drivers... but there isn't any for KVM switches, at least not this one also i never was unable to find ubuntu drivers/firmware for my mouse and keyboard (Logitech G15 and Razer Deathadder 3500). I don't know how to fix this, perhaps someone super-savvy could write/code a script or work-around or something? I really need to get this thing working, my back is getting sore from bending over and plugging in / unplugging usb/monitor/usb/monitor/usb/usb over and over again lol... and i really would be sad if the constant plugging unplugging of the usb's or the d-sub port would over time damage the ports... i don't want that... There has to be some way to get this working.. Can anyone help? The KVM is a IOGEAR GCS632U Win7 x64 Ubuntu 10.10

  Read the article

• Boot failure randomly. Can someone help?

  - by desgua

  I often get stuck at the boot on battery. I can suspend and hibernate without any trouble (even on battery). If I plug the energy cable everything goes right most of the time (edited June 13). Adding "acpi=off" doesn't solve the issue. Disabling power save from LAN at BIOS doesn't solve this too. Memory test seems to be ok: I can even compile a kernel without a problem: Has someone a tip for this? (I have the same questions marks in my mind as the image shows if not more :-/ ) obs.: this is an upgraded installation from Natty alpha. edited I (May 22): I've installed a brand new final 11.04 and got the bug again. edited II (June 13): I thought it was solved but it is not. After spending eight days off, the same problem happened even with the power cable connected. I had to reboot about 6 times until success. edited III (June 14): I can boot (even with battery) if I disconnect the cable and take off the battery for a few seconds. This lead me to conclude that maybe something is kept into memory of some hardware. Maybe or maybe not related but I also have touchpad issues (jumps) with this machine. edited IV (June 25): I opened gconf-editor and went to apps gnome-power-manager and disabled everything possibly related to suspend or hibernate. No help. Also I grabbed a Fedora live usb pendrive and got the same problem: So I think it is a hardware problem related issue.

  Read the article

• RPi and Java Embedded GPIO: Hooking Up Your Wires for Java

  - by hinkmond

  So, you bought your blue jumper wires, your LEDs, your resistors, your breadboard, and your fill of Fry's for the day. How do you hook this cool stuff up to write Java code to blink them LEDs? I'll step you through it. First look at that pinout diagram of the GPIO header that's on your RPi. Find the pins in the corner of your RPi board and make sure to orient it the right way. The upper left corner pin should have the characters "P1" next to it on the board. That pin next to "P1" is your Pin #1 (in the diagram). Then, you can start counting left, right, next row, left, right, next row, left, right, and so on: Pins # 1, 2, next row, 3, 4, next row, 5, 6, and so on. Take one blue jumper wire and connect to Pin # 3 (GPIO0). Connect the other end to a resistor and then the other end of the resistor into the breadboard. Each row of grouped-together holes on a breadboard are connected, so plug in the short-end of a common cathode LED (long-end of a common anode LED) into a hole that is in the same grouping as where the resistor is plugged in. Then, connect the other end of the LED back to Pin # 6 (GND) on the RPi GPIO header. Now you have your first LED connected ready for you to write some Java code to turn it on and off. (As, extra credit you can connect 7 other LEDs the same way to with one lead to Pins # 5, 7, 11, 13, 15, 19 & 21). Whew! That wasn't so bad, was it? Next blog post on this thread will have some Java source code for you to try... Hinkmond

  Read the article

• print jobs are held until the VirtualBox guest OS is reboot

  - by broiyan

  Here is the setup: VirtualBox 4.1.20 (which the Help window describes as 4.1.12_Ubuntu) Extension Pack 4.1.20 (for USB support) Windows 7 Home Premium as a guest operating system on VirtualBox Ubuntu 12.04 with dist-upgrade's to September 2012 as the host operating system. Fuji Xerox DocuPrint P205b, which I believe is a GDI printer, connected via USB. The problem is that often print jobs will sit in the print queue and nothing comes out of the printer. The printer status for the first item in the queue will be Printing even though nothing happens. Then upon rebooting Windows, the print jobs get printed, seemingly simultaneous to the rebooting process; that is as Windows reloads. One way to avoid this problem is to reboot Windows with the printer cable attached, and then submit the print jobs. The print jobs get printed in a timely manner. Perhaps VirtualBox has a problem with USB being plug-n-play and hot pluggable. It's not convenient to have the printer plugged in when Windows boots because: One, this is a laptop, and Two, I may be boot Windows for a purpose other than printing and not anticipate needing to print. Are there any recommendable fixes for this problem?

  Read the article

• Calculating a child object's Position, Rotation and Scale values?

  - by Sergio Plascencia

  I am making my own game editor, but have encountered the following problem: I have two objects, A and B. A's initial values: Position: (3,3,3), Rotation: (45,10,0), Scale(1,2,2.5) B's initial values: Position: (1,1,1), Rotation: (10,34,18), Scale(1.5,2,1) If I now make B a child of A, I need to re-calculate the B's Position, Rotation and Scale relative to A such that it maintains its current position, rotation and scale in world coordinates. So B's position would now be (-2, -2, -2) since now A is its center and (-2, -2, -2) will keep B in the same position. I think I got the Position and scale figured out, but not rotation. So I opened Unity and ran the same example and I noticed that when making a child object, the child object did not move at all. but had its Position, Rotation and Scale values changed relative to the parent. For example: Unity (Parent Object "A"): Position: (0,0,0) Rotation: (45,10,0) Scale: (1,1,1) Unity (Child Object "B"): Position: (0,0,0) Rotation: (0,0,0) Scale: (1,1,1) When B becomes a child of A, it's rotation values become: X: -44.13605 Y: -14.00195 Z: 9.851074 If I plug the same rotation values into the B object in my editor, the object does not move at all. How did Unity arrive at those rotation values for the child? What are the calculations? If you can put all the equations for the Position, Rotation or Scale then I can double check I am doing it correctly but the Rotation is what I really need.

  Read the article

• SD Card only mounted after a reboot

  - by hattenn

  I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• Weekend Project: Build a Fireball Launcher

  - by Jason Fitzpatrick

  What’s more fun than playing with fire? Shooting it from your hands. Put on your robe and wizard hat, make a stop at the hardware store, and spend the weekend trying to convince your friends you’ve acquired supernatural powers. Over at MAKE Magazine, Joel Johnson explains the impetus for his project: A stalwart of close-quarter magicians for years, the electronic flash gun is a simple device: a battery-powered, hand-held ignitor that uses a “glo-plug” to light a bit of flash paper and cotton, shooting a fireball a few feet into the air. You can buy one from most magic shops for around $50, but if you build one on your own, you’ll not only save a few bucks, you’ll also learn how easy it is to add fire effects to almost any electronics project. (And what gadget couldn’t stand a little more spurting flame?) The parts list is minimal but the end effect is pretty fantastic. Hit up the link below for the full build guide, plenty of warnings, and a weekend project that’s sure to impress. How to Own Your Own Website (Even If You Can’t Build One) Pt 3 How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2

  Read the article

• Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

  - by Gaurav_Java

  I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

  Read the article

• Book Review: Professional ASP.Net MVC4

  - by Sam Abraham

  The past few weeks have been particularly busy as I continue to dedicate a bigger portion of my free time to refreshing my memory and enhancing my knowledge of best practices pertaining to technologies we plan on using for a major upcoming project. In this blog post, I will be providing a brief overview of my latest reading “Professional ASP.Net MVC4” by Jon Galloway, Phil Haack, Brad Wilson and K. Scott Allen. This book is a must read for web developers looking to enhance their MVC expertise with best practices and tips shared from recognized industry experts. This book takes the reader on a 16-chapter long journey towards being a better ASP.NET MVC developer with chapter 16 putting all information covered in practical context by dissecting the implementation of Nuget.org, a real-life open-source, ASP.NET MVC project.  All code samples referenced in this book are conveniently accessible via NuGet, a free, open-source Library package manager that installs as a Visual Studio Extension. Chapters 2, 3 and 4 thoroughly cover MVC’s various components: Controllers “C”, Views “V” and Models “M” respectively. Chapter 5 covers additional extension methods (Helpers) provided to speed and ease the use of common HTML elements such as forms, textboxes, grids, to name a few… Chapter 6 tackles built-in validation while providing examples and use cases on implementing custom validation that plugs into the MVC framework. Chapters 7 thru 13 discusses the latest on Membership, Ajax, Routing, NuGet and the ASP.Net Web API. Chapters 12 (Dependency Injection) and 13 (Unit Testing) demonstrate a big competitive advantage of MVC with its ease of test-ability and plug-ability. Chapters 14 and 15 targets the advanced developer showcasing how to extend MVC to customize and replace every piece in the framework.In conclusion, I strongly recommend Professional ASP.NET MVC 4 as an excellent read for both developers already using MVC as well as those getting started with the framework.   Many thanks to the Wiley/Wrox User Group Program for their support of our West Palm Beach Developers’ Group.  You can access my reviews of books I recently read: Professional ASP.NET Design Patterns Professional WCF 4.0 Inside Windows Communication Foundation Inside Microsoft SQL Server 2008 series

  Read the article

• Difficulty Mounting Volumes on a Partitioned External HD

  - by Todd

  I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

  Read the article

• USB Ports In Wrong Mode, How To Use usbmodeswitch?

  - by user86872

  I haven't had access to my USB ports as media devices for a couple days now. I've been reading and researching everything I can find but I can't find a good guide for usbmodeswtich or usbms that I can decipher. The USB's are fine for power, but won't support my android phone as a media device, which is killing me because I use adb everyday, and won't support my plug and play mouse any longer. Not sure what caused the switch, though I think it may be related to the suspend issue I've read about, but the solutions in those threads I read also didn't work. Below is my system information and details. System: Ubuntu 12.04, 64-bit, Dedicated Machine Machine: HP-Pavillion g6 notebook, AMD A6 Quad Core Processor USBs used for: Cooling dock, Android Debug Bridge, Wireless Mouse Attempted Mod Probe, udev restart, unable to attempt lsusb due to my own lack of knowledge. :) Last Attempt Readout: ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usbhid && sleep 5 && sudo modprobe usbhid ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo restart udev udev start/running, process 2624 ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0461:4de7 Primax Electronics, Ltd webcam Any help would be greatly appreciated!

  Read the article

• Unable to mount USBDRIVE Error creating moint point: Permission denied

  - by steve

  Whenever I plug a usb into my computer a window pops up and says Unable to mount [Name of USB] Error creating moint point: Permission denied steve@goliath:/$ uname -a Linux goliath 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux steve@goliath:/$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f716ee1 Device Boot Start End Blocks Id System /dev/sda1 1 234441647 117220823+ ee GPT WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f710ee1 Device Boot Start End Blocks Id System /dev/sdb1 1 2930277167 1465138583+ ee GPT Disk /dev/sdc: 16.0 GB, 16005464064 bytes 74 heads, 10 sectors/track, 42244 cylinders, total 31260672 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 31260671 15626304 c W95 FAT32 (LBA) steve@goliath:/$ sudo mkdir /media/external mkdir: cannot create directory `/media/external': Permission denied steve@goliath:/$ sudo mkdir /media/usb0 mkdir: cannot create directory `/media/usb0': Permission denied steve@goliath:/$ sudo ls -l / | grep media drwxr-xr-x 3 root root 4096 Oct 3 22:48 media steve@goliath:/$ ls /media/ -a . .. MediaShare MediaShare is the the directory on my server that has all my movies and music. If there is any information I left out please let me know.

  Read the article

• Use two networks at the same time?

  - by Christopher

  I want to use Ubuntu 10.10 Server in a classroom, a computer lab whose bandwidth is provided by a local cable ISP. That's no problem, though the school network has an IP printer that I want to use. I cannot reach the printer through the cable Internet. But, I have two network cards. How is it possible to use both networks at once? eth0 (static 192.168.1.254) is plugged into a four-port router, 192.168.1.1. On the public side of the four-port router is Internet provided by the cable company. I also have the classroom workstations plugged into a switch. The switch is plugged into the four-port router. The whole classroom is wired into the cable Internet. The other NIC, eth1, could it be plugged into an Ethernet jack in the wall? It uses the school network, and I might receive by DHCP an IP address like 10.140.10.100, with the printer on maybe 10.120.50.10. I was thinking about installing the printer on the server so that it could be shared with the workstations. But how does this work? Can I just plug eth1 into the school network and access both LANs? Thanks for any insight

  Read the article

• What is the target of Unity?

  - by burli

  First Unity was developed for Netbooks. But the Netbook Market is shrinking. Unity is not specialized for tablet pcs like Android 3, but it may work well with some specialized Apps for those devices. Unity is still nice for Notebooks with small displays, but there is no big advantage on the desktop compared with other desktop environments like Gnome 2/3 or KDE. So what's the point? My first suggenstion was a hybrid between tablet pc and a desktop, for example for a manager. He can plug the tablet in a docking station in his office and he can work at a normal desktop, whats not possible with iOS or Android. If he is in a meeting he can use it as a tablet to make notes, for example. Or if he is somewhere else outside the office or the company. Same for normal users. They can dock the tablet and use it like a normal desktop pc or they can lie on the couch and browse in the web, read a book or chat with friend. So, thats my suggestion. But what is the real plan for Unity or Ubuntu in general? I'm curious ;)

  Read the article

• Gparted funkiness - won't recognize 1TB, full-hdd /home partition, but recognizes ext4 and /home label

  - by Kurtosis

  I have a 1TB SATA hard disk from my old desktop, and the entire thing is an ext4 /home partition (/, /boot, and swap were all on another hdd). It is now in a USB2 enclosure and I want to use it to back up my current laptop /home. To do this I need to shrink the /home partition on the 1TB backup drive. It only uses about 500GB so that shouldn't be a problem, I'll start the laptop with an Ubuntu live USB, plug in the 1TB drive, and use Gparted to shrink the 1TB /home partition to ~500GB. Then I can create a second partition in the newly freed space, and cp -ax my laptop's /home over to it. Unfortuntely, Ubuntu Live USB can detect and mount the external hdd, and Gparted can see it's there, but Gparted can't read it and hence can't resize it. Disk Utility reports the drive is fine, no errors, so I'm not sure what's the problem. See linked pics, worth a thousand words. Anyone know what the problem is here? Any pointers in the right direction much appreciated.

  Read the article

• How to divide work to a network of computers?

  - by Morpork

  Imagine a scenario as follows: Lets say you have a central computer which generates a lot of data. This data must go through some processing, which unfortunately takes longer than to generate. In order for the processing to catch up with real time, we plug in more slave computers. Further, we must take into account the possibility of slaves dropping out of the network mid-job as well as additional slaves being added. The central computer should ensure that all jobs are finished to its satisfaction, and that jobs dropped by a slave are retasked to another. The main question is: What approach should I use to achieve this? But perhaps the following would help me arrive at an answer: Is there a name or design pattern to what I am trying to do? What domain of knowledge do I need to achieve the goal of getting these computers to talk to each other? (eg. will a database, which I have some knowledge of, be enough or will this involve sockets, which I have yet to have knowledge of?) Are there any examples of such a system? The main question is a bit general so it would be good to have a starting point/reference point. Note I am assuming constraints of c++ and windows so solutions pointing in that direction would be appreciated.

  Read the article

• Notification framework for object lifecycle

  - by rlandster

  I am looking for an application, framework, or library that would help us with "object life-cycle management". There are many things that are created for users, departments, and services that, all too often, are left unmanaged. Some examples: user accounts groups SSL certificates access rights databases software license provisionings storage list-serve accounts These objects are created and managed by a wide variety of applications and systems. Typically, a user (person) requests (either explicitly or implicitly) one of these objects. A centralized management tool would help us manage such administration chores as: What objects does user X currently own/manage? Move the ownership of object P to user X; move all objects owned by user X (who was just been fired) to user Y. For all objects of type T that have expired be sure the objects have been disabled or deleted by their provider. How many active (expired, about-to-expire) objects of type P are there? Send periodic notifications to all users who own active objects of type P reminding them of what they own. There is a security alert for objects of type P; send a notification to all users who own these types of objects to take a specific remedial action. Delete or disable a set of objects based on expiration (or some other criteria). These objects are directly managed through their own applications (Active Directory, MySql, file systems, etc.) and may even have their own notification systems, but I want to centralize this into an "object management system". The OMS should allow the association with an external identity provider that defines who the users and groups are (e.g., LDAP, Active Directory) creation of objects association of an object to a specific user and/or group association with an expiration date creation of flexible reporting including letting users know what objects they currently own and their expiration dates integration with an external object "provider" via a plug-in We could write something from scratch, but I am hoping there is something already out there that will help, either an entire application or a set of libraries that provide much of what is needed. Any ideas?

  Read the article

• "The daemon is being inhibited" error message when mounting volumes on a partitioned external HD [closed]

  - by Todd

  I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

  Read the article

• After upgrading to trusty, ALSA midi connection (aconnect) doesn't seem to work right

  - by SougonNaTakumi

  Previously in kubuntu 13.10 I was able to open vmpk or plug in a midi keyboard, and provided that TiMidity was running in server mode, I could run aconnect [keyboard port (129:0 for vmpk)] 14:0 aconnect 14:0 128:0 and I could play the keyboard and get sound. But now, a while after upgrading to trusty, I tried to do that, and didn't get any sound. TiMidity itself still plays files fine, but if I try to play them with aplaymidi, I still just get silence. Oddly, the midi files are clearly being read. When I ran (where 130:0 was vmpk's input port) aplaymidi -p 130:0 ~/path/to/midi.mid vmpk was highlighting notes on the piano as if it were playing the midi. One time I tried this, TiMidity (?) very briefly played a fraction of a second of the first chord of my song before everything went silent and vmpk just highlighted the first voice on the keyboard as usual. Now the weirdest part of this is that probably about 40% of the time, when I've played at least one note with either aplaymidi or vmpk, when I run aconnect -x I get a sudden burst of a note or chord from my speakers (that is, if I played one note, I get a note; if I played multiple sequential notes, they turn into a chord), as if the notes were being queued up but not being played and that somehow liberated them. I have no idea what's going on there. A little while ago I remember having a problem with Audacity playing wav files sped up and also locking up if I tried to pause it, which it stopped doing when I set the audio devices to the actual audio devices rather than pulse. But now when I checked again, it's doing the opposite: it won't play audio at all and/or acts weirdly if I don't set the audio devices to pulse, and either way will very occasionally randomly do the speeding up thing regardless. Oddly in the midst of what's looking like a pretty screwed up sound system, sound in VLC and Firefox has been working fine and if I play a wav file with aplay ~/path/to/sound.wav that works fine too. Any idea what I could do to figure out what's wrong with ALSA and/or fix it?

  Read the article

• External display resolution issue

  - by Steven

  I'm new to Ubuntu. I've 'dabbled' in the past but Windows was annoying me too much so I finally made the change. One thing I use my laptop for is outputting the screen onto an external monitor. In Windows this usually works fine (but when there is an issue, it's a pain to resolve and has crashed my computer on many occasions). In Ubuntu it's a very simple case of "plug and play" because it displays the content immediately with no major problems. However, I can only alter the resolution of the external display to 4:3 formats, whereas the external monitor is 16:9, so the picture is stretched. In Windows there's loads of resolutions to choose from. If I disable the laptop's screen, it still doesn't allow me to display the correct resolution externally (on VGA). Further to that, if I close the laptop it keeps the external screen as it is, but when I reopen the laptop, the laptop screen doesn't turn back on until I restart. If it's a video I am watching, I can use VLC to alter the aspect ratio so the video looks fine, but it's quite an annoying work around. I used terminal to find my graphics controller, which is "Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)" (not great, I know... the laptop was a free gift with my mobile!) Any idea of how I can get the resolution on the external monitor to be correct?

  Read the article

• ubuntu nic card issue

  - by Blainer

  I am trying to install NIC r8168 and it shows everything installed ok. It is a brand new NIC and the lights wont come on when I plug in a ethernet. The NIC is that is not working is eth0. Why does it show the r8168 driver being used by 0? My NIC model number is ST1000SPEX if anyone is wondering. lsmod Module Size Used by r8168 215669 0 ifconfig eth0 Link encap:Ethernet HWaddr 00:0a:cd:1e:0a:4a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 00:19:d1:1d:f6:7a inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::219:d1ff:fe1d:f67a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:551467 errors:0 dropped:0 overruns:0 frame:0 TX packets:145219 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:409744342 (409.7 MB) TX bytes:12233173 (12.2 MB) Interrupt:21 Memory:dfde0000-dfe00000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:280 errors:0 dropped:0 overruns:0 frame:0 TX packets:280 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22608 (22.6 KB) TX bytes:22608 (22.6 KB) Ubuntu 11.10 x64 Kernel 3.0.0-12-generic

  Read the article

• How to integrate a PHP CMS with paypal so that only users who completed a payment can register and authenticate?

  - by ibiza

  I am currently using a PHP CMS - cmsmadesimple - in order to create a website where services will be sold. I intend to use Paypal 'Buy Now' buttons in order to offer a few packages that will be renewable every 1-month or every 3-months and that grant access to the secure content of the website for a given period of time. Everything is going well so far but I am somewhat at loss for the user registration process as I have a few constraints I would like to use and it would be nice to automate the process if possible. Here are the constraints : User should be able to register to my website and choose a password himself Only users that paid should be able to register Access permissions should be disabled automatically after the service period if the package is not renewed And here is the process which I am thinking of : User clicks 'buy' on my website User is redirected on Paypal and completes the payment The paypal email used to pay should be returned to my server and somehow stored If it is a new email, user needs to register to my website (else if it is a returning customer, the deactivation flag for payment stopped should be removed to give back access) If a user does not renew his subscription, there should be a deactivation flag automatically set to the email used in order to lock access until next payment. Ideally, no human intervention is needed. What is the best way to implement all this? I am a bit at loss. I found this article that explained a few things and even has a nice code snippet, except that I'm not sure where to plug it. Thanks all

  Read the article

• Pick Up BioShock and Bioshock 2 for Price of a Big Mac Meal

  - by Jason Fitzpatrick

  Pre-ordering just opened on the third-installment of the highly-acclaimed horror-survival game series BioShock, BioShock Infinite. As part of the pre-order promotions, you can pick up a bundled copy of BioShock and BioShock 2 for a song. For the unfamiliar, BioShock is an atmospheric first-person-shooter backed up by an incredible storyline set in the underwater utopian-turned-dystopian city of Rapture. BioShock 2 continues the story in Rapture and the upcoming release (Febuary 2013) of BioShock Infinite takes place in the same game universe but fifty years before the events of the first two installments. If that seems like the kind of game you could dig into, Amazon has the Windows-platform version of BioShock and BioShock 2 bundled together for a scant $7.49–81% off the Steam and general retail price. The best part about the promotion is you can either download the games from Amazon or, for those of you that use Steam, you can simply plug the game product key into Steam. You can read more about the both the original two games and the upcoming release at the official BioShock site. BioShock Dual Pack [via Geeks Are Sexy] How Hackers Can Disguise Malicious Programs With Fake File Extensions Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >