Search Results

Search found 25071 results on 1003 pages for 'information overload'.

Page 772/1003 | < Previous Page | 768 769 770 771 772 773 774 775 776 777 778 779  | Next Page >

• Apache Server not working in MAMP

  - by jasonaburton

  Here's what I did before the problem started: I was creating a database for a site that I am working on in phpMyAdmin. I wrote some code to try to connect to the database I just created and I couldn't connect. I assumed it might be because I needed a password to connect to the database, so I created a password for it. Immediately after I created the password phpMyAdmin kicked me out saying: "#1045 - Access denied for user 'root'@'localhost' (using password: YES)" "phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server." I found the php.ini file and searched for where I could change the password to match the one I just made, but couldn't find where I needed to change it. So I decided to scrap the database and uninstall MAMP from my computer and reinstall it hoping it would just reset all the defaults and I could go on my merry way. But now after reinstalling MAMP and trying to run the servers Apache won't start up and I have no idea why. One problem after another... Any advice or helpful ideas?

  Read the article

• Sendmail stat=Sent

  - by user44774

  Guys, I am trying to figure out why sendmail is saying that it sends out an email but I actually never get it. This is from the logs when the email is being sent out: I have replaced the email address with some fake address and I have also replaced the name of the server with a fake hostname. The most significant point of this information from the logs is that it shows that the "Message was accepted for delivery". Do you guys have any suggestions as to why it seems like the message goes out but I never get the actual email? Jun 2 14:34:40 server sendmail[9668]: o52IYeSi009668: --- 250 2.0.0 o52IYeSi009668 Message accepted for delivery Jun 2 14:34:40 server sendmail[9667]: o52IYe9I009667: [email protected], ctladdr=rick (500/500), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30058, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (o52IYeSi009668 Message accepted for delivery) Jun 2 14:34:40 server sendmail[9668]: o52IYeSj009668: <-- QUIT Jun 2 14:34:40 server sendmail[9668]: o52IYeSj009668: --- 221 2.0.0 server.server.com closing connection Jun 2 14:34:41 server sendmail[9670]: o52IYeSi009668: SMTP outgoing connect on [192.168.1.9] Jun 2 14:34:41 server sendmail[9670]: o52IYeSi009668: to=, ctladdr= (500/500), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=120368, relay=mailhost.worldnet.att.net. [207.115.11.17], dsn=5.1.1, stat=User unknown Jun 2 14:34:42 server sendmail[9670]: o52IYeSi009668: o52IYgSi009670: DSN: User unknown Jun 2 14:34:42 server sendmail[9670]: o52IYgSi009670: to=, **delay=00:00:00, xdelay=00:00:00, mailer=local, pri=31625, dsn=2.0.0, stat=Sent**

  Read the article

• Thecus N5200, disk has dropped out of RAID5

  - by Anders Ekdahl

  We have a Thecus 5200 NAS here at work with five WD Caviar Black 2TB disks in a RADI5 array. Yesterday, disk 4 dropped out of the array, and in the NAS web interface there's a warning about the RAID array being "degraded". When I go into Storage - Disks, disk 1 and 4 has a warning next to them. When I click on the warnings, this information about the disks are displayed: Tray Number 4 Model WD2001FASS-00W2B Power On Hours 2403 Hours Temperature Celsius 34 Reallocated Sector Count 66 Current Pending Sector 1447 Raw Read Error Rate 61 Seek Error Rate 0 Hardware ECC Recovered N/A Tray Number 1 Model WD2001FASS-00W2B Power On Hours 2403 Hours Temperature Celsius 32 Reallocated Sector Count 0 Current Pending Sector 1465 Raw Read Error Rate 0 Seek Error Rate 0 Hardware ECC Recovered N/A I'm not really an expert on either disks or RAID arrays. Does this indicate that the fourth disk is damaged, and needs to be replaced? And what about disk number one? It has a warning, but it's still in the array. Is it safe to add the fourth disk back into the array as a spare? I can't find any way to add it back as a it were before.

  Read the article

• Shared configuration for Eclipse on Debian server

  - by Joris Meys

  I've manually installed the latest Eclipse on our debian server and wanted to configure it so all users share the same configuration. It turned out less obvious than I thought: I don't seem to be able to install packages for all users. If I run it myself, all configuration data is saved under my own home directory. If I run Eclipse using sudo, everything is saved under the root directory but is not accessible for other users when they run Eclipse. I've been browsing the manual of Eclipse and some forums, but apart from a "yes, you can" I couldn't find any information on how that should be done. The biggest problem is installing plugins for all users to be found. Any help is greatly appreciated. Eclipse : 3.6.1 classic, installed using this procedure. Server uname: GNU/Linux * 2.6.26-2-amd64 Server is accessed using Putty, and Gnome desktop through realVNC. Just mentioning it if that is of any importance. Our sysadmin is on "prolonged leave" (working in Spain and never replaced), so I'm stuck without help here. EDIT : -- I asked this question also on StackOverflow as I wasn't certain this is a genuine server-related question. Please feel free to merge both questions at the appropriate place. --

  Read the article

• XP/Intel wirelss only showing 'hpsetup' ad-hoc network that isn't there

  - by ewall

  Trying to help my friend with her work XP laptop, which recently stopped seeing any wireless SSIDs except the SSID 'hpsetup' (presumably from a wireless-enabled HP printer). Relevant information: The laptop is a Lenovo T500 (Centrino 2 chipset) with XP SP3. The network adapter is Intel WiFi Link 5300 AGN (built-in). The latest version (13.5) of the Intel drivers only are installed, not the Intel config software, so XP is using the Wireless Zero-Config manager. The wireless router is a NetGear WGR614 v7 with 802.11b/g. The SSID is broadcasting, and all the other laptops in the house can see and connect to it. On the laptop, I have tried repairing the network connection, disabling power management, turning off 802.11a & n radio, and more... but it didn't help. Some of the wireless settings are managed by Group Policy from her office (I get the "At least one of your changes was not applied successfully to your wireless configuration" message). It is enforced to connect to "Access point (infrastructure) networks only". The real kicker is that my laptop does not an SSID named 'hpsetup' here, but it can see several broadcasted SSIDs including the one we want, while my friend's laptop doesn't see any SSID except 'hpsetup'. Any suggestions?

  Read the article

• IIS 7.5 truncating POST body containing JSON data with ASP.NET MVC 3

  - by Guneet Sahai

  I'm facing a problem which I hope is a configuration thing with IIS but is right now giving a lot of trouble. Basically I have a controller that accepts a JSON and does some processing. While it generally works fine, but every now and then when the system has some load I get an error. After some painful debugging, we figured the incoming JSON gets truncated which causes the deserialzer to fail. To narrow down the problem - we wrote a simple controller that accepts a JSON and tries to deserialize it. In case it fails it just logs it. This works fine but when I hit it using a load testing tool (JMeter) it throws the same error (truncation) for a few requests. The # of failures increased when I increase parallel connections. It starts showing with 150 concurrent requests. We are running IIS 7 on windows 2008 server with ASP.Net MVC 3 with more or less default configuration of IIS. More information available in my question below http://stackoverflow.com/questions/12662282/content-length-of-http-request-body-size

  Read the article

• Group Policy for DNS Server Addresses

  - by John

  This question deals strictly with the methodology of using Active Directory to publish DNS settings and controlling the DNS server address order to domain attached clients. This is not asking about if this is the right function, role, or best use of group policy; but rather, how to make it work. I would like to be able to publish in group policy DNS addresses and possibly control the order in which the client consumes the addresses. I have tried following the information from this site without success. I set the following setting within group policy, but the client never shows the settings within the TCP/IP properties. Computer Configuration/Administrative Templates/Network/DNS Client/DNS Servers I did list them as a single space separated list. For example, the following: 192.168.0.1 192.168.10.3 192.168.34.2 192.168.2.67 192.168.56.99 192.168.99.23 This would be for Windows 7, Windows Server 2003, and Windows Server 2008 clients. I am not sure what I am doing wrong or how to get this to work. Am I missing a setting? Do I need to set something differently?

  Read the article

• Where is '/host' declared for mount in Wubi (Ubuntu 9.10)?

  - by Pedro

  Hi! I'm using Wubi (ubuntu 9.10), and I couldn't find where '/host' mountpoint is declared for mounting. There's no entry in fstab, but it's listed in /proc/mount and mounted at boot time. Any ideas? pedroel@ubuntu:~$ cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev tmpfs rw,relatime,mode=755 0 0 /dev/sda1 /host fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 /dev/loop0 / ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 none /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 none /var/run tmpfs rw,nosuid,relatime,mode=755 0 0 none /var/lock tmpfs rw,nosuid,nodev,noexec,relatime 0 0 none /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 /dev/loop1 /home/pedroel/Downloads ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 gvfs-fuse-daemon /home/pedroel/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 /dev/mapper/isw_efhafcifi_RAID_Volume01 /media/RAID_D fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 pedroel@ubuntu:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc defaults 0 0 /host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/pedro.disk /home/pedroel/Downloads ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/swap.disk none swap loop,sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 Thanks in advance, Pedro

  Read the article

• Computer sponteously reboots when doing heavy file copy to/from disk

  - by Mark Hosang

  I've been fighting with this problem for the last 3 weeks where my machine will just instantly reboot. No BSOD, and when i checked the event log all that was reported was the generic "Kernal-power" error with the detailed information pointing to a hard crash. This is a machine that was working for 18 months before these crashes started happening. When they started happening is after I added 3 HDs in a RAID-5, upped the memory to 12gb, moved to a new house, added a SSD and added about 5 case fans. I have thus eliminated the RAID, and determined that the SSD was not the cause (because it was still crashing even though the ssd wasn't connected). I've run memtest several times over night with no memory problems showing up. I've run IntelBurnTest to max out the cpu to see if it was a heat issue and at full tilt after 20 min it was only at 85C and the machine didn't crash. I also took a look at the voltages during this test, with a screenshot at the bottom of this post I've ruled out a software issue by reinstalling windows 7 ultimate x64 a total of 5 times, but even during that the install it crashes. Happens sometime during file copying at the beginning, or during uncompressing files, or sometimes during running windows update. The only discernible pattern i can see is that it seems to crash when hard disks might be spinning up or when they are accessed heavily from large file transfers. My current guess is that it is probably an issue with the MB, PSU or the power coming through the outlet. Any suggestions of what i could try to troubleshoot or what may be wrong? Specs PSU: Seasonic M12 700w Mem: 12gb CPU: i7-920 with stock heatsink MB: Asus P6T HDs: 3 green WD and 1 Corsair force 3 120b with 1.3.3 firmware Running full tilt voltages Idling Voltages

  Read the article

• Extract Distinct restful MVC routes from IIS logs

  - by Grummle

  This is a cross post from StackOverflow that after some consideration I believe can be asked here (not getting anything on SO). My shop is using MVC3/FUBU on IIS 7. I recently put something into production and I wanted to gather metrics from the IIS logs using log parser. I've done this many times before with file endpoints but because the MVC3 routes are of the form /api/person/{personid}/address/{addressid} the log saves /api/person/123/address/456 in the uristem column. Does anyone have any ideas on how to get data about specific routes from IIS logs? As an exmaple: Log Like this: cs-uri-stem /api/person/123/address/456 /api/person/121/address/33 /api/person/3555 /api/person/1555/address/5555 I want information about all where the route used was /api/person/{personid} so the count would be 1 in this case. Ideally what I'd like to figure out is how to do is is have IIS log the regex for the route that is choose for a particular url. So in the IIS logs have /api/person/{personid}/address/{addressid} in a column in addition to the cs-uristem /api/person/1555/address/5555

  Read the article

• fwbuilder/iptables manually scripted + autogenerated rules at startup?

  - by Jakobud

  Fedora 11 Our previous IT-guy setup iptable rules on our firewall in a way that is confusing me and he didn't document any of it. I was hoping someone could help me make some sense of it. The iptables service is obviously starting at startup, but the /etc/sysconfig/iptables file was untouched (default values). I found in /etc/rc.local he was doing this: # We have multiple ISP connections on our network. # The following is about 50+ rules to route incoming and outgoing # information. For example, certain internal hosts are specified here # to use ISP A connection while everyone else on the network uses # ISP B connection when access the internet. ip rule add from 99.99.99.99 table Whatever_0 ip rule add from 99.99.99.98 table Whatever_0 ip rule add from 99.99.99.97 table Whatever_0 ip rule add from 99.99.99.96 table Whatever_0 ip rule add from 99.99.99.95 table Whatever_0 ip rule add from 192.168.1.103 table ISB_A ip rule add from 192.168.1.105 table ISB_A ip route add 192.168.0.0/24 dev eth0 table ISB_B # etc... and then near the end of the file, AFTER all the ip rules he just declared, he has this: /root/fw/firewall-rules.fw He's executing the firewall rules file that was auto-generated by fwbuilder. Some questions Why is he declaring all these ip rules in rc.local instead of declaring them in fwbuilder like all the other rules? Any advantage or necessity to this? Or is this just a poorly organized way to implement firewall rules? Why is he declaring ip rules BEFORE executing the fwbuilder script? I would assume that one of the first things the fwbuilder script does it get rid of any existing rules before declaring all the new ones. Am I wrong about this? If that was the case, the fwbuilder script would basically just delete all the ip rules that were defined in rc.local. Does this make any sense? Why is he executing all this stuff at startup in rc.local instead of just using iptables-save to keep the firewall settings at /etc/sysconfig/iptables that will get implemented at runtime?

  Read the article

• plesk: how to configure reverse proxy rules properly?

  - by rvdb

  I'm trying to configure reverse proxy rules in vhost.conf. I have Apache-2.2.8 on Ubuntu-8.04, monitored by Plesk-10.4.4. What I'm trying to achieve is defining a reverse proxy rule that defers all traffic to -say- http://mydomain/tomcat/ to the Tomcat server running on port 8080. I have mod_rewrite and mod_proxy loaded in Apache. As far as I understand mod_proxy docs, entering following rules in /var/www/vhosts/mydomain/conf/vhost.conf should work: <Proxy *> Order deny,allow Allow from all </Proxy> ProxyRequests off RewriteRule ^/tomcat/(.*)$ http://mydomain:8080/$1 [P] Yet, I am getting a HTTP 500: internal server error when requesting above URL. (Note: I decided to use a rewrite rule in order to at least get some information logged.) I have made mod_rewrite log extensively, and find following entries in the logs [note: due to a limitation of max. 2 URLs in posts of new users, I have modified all following URLs so that they only contain 1 slash after http:. In case you're suspecting typos: this was done on purpose): 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (2) init rewrite engine with requested uri /tomcat/testApp/ 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (3) applying pattern '^/tomcat/(.*)$' to uri '/tomcat/testApp/' 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (2) rewrite '/tomcat/testApp/' - 'http:/mydomain:8080/testApp/' 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (2) forcing proxy-throughput with http:/mydomain:8080/testApp/ 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (1) go-ahead with proxy request proxy:http:/mydomain:8080/testApp/ [OK] This suggests that the rewrite and proxy part is processed ok; still the proxied request produces a 500 error. Yet: Addressing the testApp directly via http:/mydomain:8080/testApp does work. The same setup does work on my local computer. Is there something else (Plesk-related, perhaps?) I should configure? Many thanks for any pointers! Ron

  Read the article

• Toshiba Satellite P755D USB 3.0 Drivers Missing - Windows 7 Professional

  - by nicorellius

  I bought a Toshiba Satellite P755D recently and installed Windows 7 Professional on the machine. It runs great. But I noticed the exclamation point in the yellow triangle icon in the Device Manager next to the Universal Serial Buss (USB) Controller (I'm assuming this is the USB 3.0 controller because mine doesn't recognize devices). Normally, when this kind of thing happens I go to the manufacturer's website and download appropriate drivers and call it a day. But not this time... I browsed to my model and found no driver for the USB 3.0 controller. I tried other HW and Utility drivers, thinking they would be bundled. No luck. I tried looking up the motherboard in my machine. Generic name, no luck. I then called Toshiba technical support and they tried basic troubleshooting, eg, uninstall device, reboot, for auto-installation; no luck. I popped the Windows 7 disk back in and tried to get information that way, no luck. Finally, the technical support guy said he would look into the engineer's system to see if there was a specific driver available and that's where I'm at. The technician told me that these USB 3.0 drivers come within the native driver pack in windows but that doesn't seem to be the case. Any ideas? EDIT - See attached screen shots.

  Read the article

• Pivot Table grand total across columns

  - by Jon

  I'm using Excel 2010 and Power Pivot. I'm trying to calculate confidence and velocity for a development team. I'm extracting some information from our time and defect system each day and building a data set. What I need to do with Excel is do the calculations. So each day I add to my data set 1 row per task in the current project, estimate for that task and the time spent on that task. What I want to calculate is the estimate/actual for each task but also for each person. The trouble is that each day the actual is cumulative so I need to pick out the maximum value for each task. The estimate should remain unchanged. I can make this work at the task level with a calculated measure (=MAX(worked)/MAX(estimate)) but I don't know how to total this up for a person. I need the sum of the max worked for each task. So a dataset might look like: Name Task Estimate Worked N1 T1 3 1 N2 T2 3 1 N3 T3 4 1 N1 T1 3 2 N2 T4 5 1 N3 T3 4 2 N1 T5 1 2 N2 T6 2 3 N3 T7 3 2 What I want to see is for task T1 2 days were worked against an estimate of 3 days - so 2/3. For person N1 I want to see that they worked a total of 4 days against an estimate of 4 days so 4/4. For person N2 they worked 5 days for an estimate of 10 days. Any ideas on how I can achieve this?

  Read the article

• How to transform a csv to combine matching rows?

  - by Christian Wolf

  I have a CSV file with some transaction data. Let's say date, volume, price and direction (sell/buy). Additionally there is a ID for each transaction and on each closing transaction (the newer one) there is a reference to the corresponding transaction. Classical database referencing. Now I want to do some statistics and draw some plots. This could be done via Octave, LaTeX/TikZ, Gnuplot or whatever. To do this I need both buy and sell price in one row. My thought was to preprocess the CSV to get another CSV containing the needed information and then to do the statistics. In the end I'd like to have a solution based on scripts and not on a spreadsheet as data might change often (exported from online DB). My actual solution (see http://paste.ubuntu.com/6262822/ ) is a bash script that parses the CSV line by line and checks if there exists a corresponding transaction. If found, a new row is written to the destination CSV. If not a warning is printed. The bad news: For each row in the source file I have to read the whole file a few times. This causes long running times of 10sec for 300 lines. As the line number might rise soon (10k lines), this is not perfect. I am aware, that there are many shells to be opened in the script which might cause the performance problems. Now my questions: Is bash/awk/sed/.... a good way to do things? Should I first import all data into a "real" local database to use SQL? Is there an easy way to achieve the desired results?

  Read the article

• web.config file changings guide

  - by Student

  Hi experts how are you all? i am student, and learning asp.net c# visual studio 2010 with using sql server 2005. I have developed a website which has database. I developed this website with self studies taking help from internet. the website is completed and working perfectly in my computer. I have hosting server and domain name registered already. the problem is when I upload my website it doesn't work there the following error displays: Server Error in '/' Application. Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: Unrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive. Source Error: Line 11: <system.web> Line 12: <customErrors mode="Off" /> Line 13: <compilation debug="false" targetFramework="4.0"/> Line 14: </system.web> Line 15: </configuration> Source File: C:\Inetpub\vhosts\urdureport.com\httpdocs\web.config Line: 13 Version Information: Microsoft .NET Framework Version:2.0.50727.5472; ASP.NET Version:2.0.50727.5474 I don't know what should I do to get it work on hosting server please help me in this regard that what should I do with this. Thank you in advance

  Read the article

• Known USB 2.0 devices don't install driver, but must be manually forced

  - by Darragh

  When a known USB 2.0 device is plugged in and detected, it doesn't install the driver correctly but shows a Code 28 error and lists the device under "Other Devices" in Device Manager. When view properties of this device , it shows the following status; The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. When updating the driver manually and selecting the appropriate driver Windows doesn't believes it's the correct driver, but you can force the installation and it works! The other condition the driver will auto-install is when the same USB device is plugged into a USB 3.0 port. Power related issues are not also causing this as I have tried vi a Docking station, USB hub. etc.. Devices tried; Jabra Headset USB-Mass Storage Device (flash disk and ext HD) MS Wireless Keyboard & Mouse USB Ethernet controller (USB-MAC controller) This is on a laptop part of a Domain with Windows 7 Ent 7601, I am logged in as a local administrator. There isn't any Group Policies blocking not signed driver or whitelisted devices on the domain. Any suggestions please feel free

  Read the article

• Macros in Excel 2010 hangs

  - by Ahmad

  I have a spreadsheet with several macros. Generally, when previously using Excel 2007, a user clicks a button and everything works as expected (calculations, some email sending & file I/O). Typically, the expected run-time is about 90 seconds. The spreadsheet is a xlsm file created with Excel 2007. With Excel 2010 however, the same user process results in a non-responsive excel and forces us to kill excel from the task manager. Some note that I have gathered so far in trying to debug this issue: When monitoring CPU usage, it seems that Excel does start the macro. CPU usage increases as expected to about 47% for a few seconds. Excel.exe than drops to 0% usage and I now have a non-responsive Excel (even after 1 hour). If I set debug break points across modules and different functions and step through the code (after clicking the button) , the process works as expected albeit much slower. To add, there were no exceptions. I am at a complete loss as to what the issue may be. I initially thought it may be the add in that is being used but that was debunked by point 2. This seems to be a very odd situation. I can provide more information if required, but I'm at wits end about the root cause could be. I need help in diagnosing and resolving this issue.

  Read the article

• Win Svr 2003 DHCP Bad Addresses

  - by VinceM

  After looking at other posts I still can figure this out. I'll start at the beginning... I inherited this network and I'm not the most knowledgeable about networking... We have a AD DHCP Server that is also our DNS server, We were having some VPN issues (on the same server) and my boss decided to disable routing and remote access, which cleared the settings. We couldn't get it set back up correctly so we rolled back to a backup drive they created a number of months ago. Since rolling back I've had Bad_Address listings in DHCP and there is a number of duplicate records in the DNS Forward Lookup Zones. We have less than 50 devices on the network but I have over 90 Bad Addresses showing. This server is currently running but we get IP address conflicts all the time on pretty much all the computers. I have had people do release and renew but it didn't help... I have also deleted and re-added the scope to no avail either. Any help or ideas would be greatly appreciated and I apologize if I missed another post that has information to help. Thanks, Vince

  Read the article

• DDoS nulling to some ips and other options?

  - by Prix

  I am looking for some information in regards DDoS in the follow scenario: I have a server that is behind a Cisco Guard and it will be DDoS'ed, I only care about a set list of IPS that by not means are the attackers. Is it possible to null all other ips but this list to actually get any response to my server or in the long run no matter what I do if they have enough DDoS power I will just go down like a flie ? Is there any recommended company out there that can actually cope with a DDoS ? My server will mainly run several clients that will get connected to a external server and all it needs access to is my local MySQL the the private network so I can access it. There will be no other services runnings such as web or ftp etc at least not to the external ips of the server if i ever have to have any of these service they will be on the private network. The MySQL will be available externally only to 1 safe ip not known by anyone but me and internally at localhost + private network. Are there any solutions ?

  Read the article

• Windows desktop virutalization instead of replacing work stations

  - by Chris Marisic

  I'm head of the IT department at the small business I work for, however I am primarily a software architect and all of my system administration experience and knowledge is ancillary to software development. At some point this year or next we will be looking at upgrading our workstation environment to a uniform Windows 7 / Office 2010 environment as opposed to the hodge podge collection of various OEM licensed editions of software that are on each different machine. It occurred to me that it is probably possible to forgo upgrading each workstation and instead have it be a dumb terminal to access a virutalization server and have their entire virtual workstation hosted on the server. Now I know basically anything is possible but is this a feasible solution for a small business (25-50 work stations)? Assuming that this is feasible, what type of rough guidelines exist for calculating the required server resources needed for this. How exactly do solutions handle a user accessing their VM, do they log on normally to their physical workstation and then use remote desktop to access their VM, or is it usually done with a client piece of software to negotiate this? What types of software available for administering and monitoring these VM's, can this functionality be achieved out of box with Microsoft Server 2008? I'm mostly interested in these questions relating to Server 2008 with Hyper-V but fell free to offer insight with VMware's product line up, especially if there's any compelling reasons to choose them over Hyper-V in a Microsoft shop. Edit: Just to add some more information on implementation goals would be to upgrade our platform from a Win2k3 / XP environment to a full Windows 2008 / Win7 platform without having to perform any of that associated work with our each differently configured workstation. Also could anyone offer any realistic guidelines for how big of hardware is needed to support 25-50 workstations virtually? The majority the workstations do nothing except Office, Outlook and web. The only high demand workstations are the development workstations which would keep everything local.

  Read the article

• How to rename network printer on Windows 7?

  - by Adrian McCarthy

  This question is similar to How do you rename a printer device in Windows 7 64 bit, except the answers there do not work, and I'll provide more information. This is a home network, not a domain. I have set up a Brother HL-5170DN. It is a network printer connected directly to an Ethernet hub. I can connect to it with Windows 7, but on Windows 7 it defaults to the name "binary_p1 on Brn37415f", which isn't very useful. And I cannot seem to change the name. I have it working with several Windows XP and Vista machines, and I can change the name on those machines. On Windows 7 Printer properties: I can see the "binary_p1" name on the General tab. I can select the text, but I cannot change it. The field is not grayed out, but I cannot type anything into it. On the Ports tab, all of the controls are grayed out (disabled). The selected Port is called "\\Brn_37415f\binary_p1", and it's described as "Client Side Rendering Provider" and the printer field says "binary_p1". On the Security tab, I can see that my account has "Manage this printer" permissions. If I choose Printer Server Properties, I can select the port and click Configure Port, but I get a dialog that says, "An error occurred during port configuration. This option is not supported." I have found many forums with people asking the same question without getting an answer. Update: No more bounties to offer, but I'm still looking for a solution to this problem.

  Read the article

• Best usage for a laptop being used as a desktop without removable batteries

  - by Senseful

  After reading the information on http://batteryuniversity.com, I realize that one of the best ways to permanently damage a lithium ion battery is to use the battery at a high temperature while it's fully charged. This is exactly what happens when you use the computer as if it were a desktop computer, since leaving it plugged in will keep the battery at 100% and using the computer will heat up the battery. This is why it's recommend to remove the battery from your laptop if you are using it is this scenario. My question is what would you do if the laptop doesn't have removable batteries (e.g. a MacBook Pro)? Should I use some kind of charge cycle such as: charge to 80%, unplug the power chord, use the laptop until it reaches 20%, then repeat the cycle by charging to 80% again? If so, which values should I use instead of 80% and 20%? (I think charging to 80% is better than 100% because of the damage that a hot battery at 100% can do, but I just made the figure 80% up, and I'm sure there's a better number to strive for which is backed by science.) I've read many of the articles on batteryuniversity.com, but couldn't find anything pertaining to this. Update: What about doing something like charge (or discharge) it to 50%, then plug it in and turn on settings which use the battery as much as possible (e.g. brightness all the way up, wi-fi on, etc.), in order to try to maintain the battery at 50% (i.e. the rate it is charging is the same as it is discharging). This will probably heat up the battery, but would make it so you don't need to constantly plug and unplug the laptop. The one bad thing is that you are taking up more charge cycles which would decrease the battery life, thus I'm not sure this is a good idea.

  Read the article

• Why we can change our IP address?

  - by iamstupid

  I across some websites that offer change of our IP addresses. It says, we can surf net anonymously, including changing our IP address and location. Most of the softwares are not free, so I have not try it out yet. But my question is, so, IP addresses will no longer be unique or valid for identify which computer were sending/request the information? I though only the ISP can determine our IP, so we can change our IP from some commercial softwares huh? Case: If I change my IP address, I go to a website which is supposed to be banned by my country, will the ISP let me pass the check and I will be able to browse the website which should be blocked? another question: From what I know, if we want to go to certain website, here is the flow: My Computer = ISP = Website = ISP = My computer I am not sure, if its the correct flow, but I am sure that, whichever website I want to visit, I need to go through my ISP, isnt it?. So if we change out IP, our ISP will record our new IP or the original(assigned-by-ISP) IP? Sorry for my bad English.

  Read the article

• Where is '/host' declared for mount in Wubi (Ubuntu 9.10)?

  - by Pedro

  I'm using Wubi (ubuntu 9.10), and I couldn't find where '/host' mountpoint is declared for mounting. There's no entry in fstab, but it's listed in /proc/mount and mounted at boot time. Any ideas? pedroel@ubuntu:~$ cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev tmpfs rw,relatime,mode=755 0 0 /dev/sda1 /host fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 /dev/loop0 / ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 none /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 none /var/run tmpfs rw,nosuid,relatime,mode=755 0 0 none /var/lock tmpfs rw,nosuid,nodev,noexec,relatime 0 0 none /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 /dev/loop1 /home/pedroel/Downloads ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 gvfs-fuse-daemon /home/pedroel/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 /dev/mapper/isw_efhafcifi_RAID_Volume01 /media/RAID_D fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 pedroel@ubuntu:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc defaults 0 0 /host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/pedro.disk /home/pedroel/Downloads ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/swap.disk none swap loop,sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 Thanks in advance, Pedro

  Read the article

< Previous Page | 768 769 770 771 772 773 774 775 776 777 778 779  | Next Page >