Search Results

Search found 21963 results on 879 pages for 'lance may'.

Page 776/879 | < Previous Page | 772 773 774 775 776 777 778 779 780 781 782 783  | Next Page >

• Linux Software RAID recovery

  - by Zoredache

  I am seeing a discrepancy between the output of mdadm --detail and mdadm --examine, and I don't understand why. This output mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Wed Mar 14 18:20:52 2012 Raid Level : raid10 Array Size : 3662760640 (3493.08 GiB 3750.67 GB) Used Dev Size : 1465104256 (1397.23 GiB 1500.27 GB) Raid Devices : 5 Total Devices : 5 Preferred Minor : 2 Persistence : Superblock is persistent Seems to contradict this. (the same for every disk in the array) mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 0.90.00 UUID : 1f54d708:60227dd6:163c2a05:89fa2e07 (local to host) Creation Time : Wed Mar 14 18:20:52 2012 Raid Level : raid10 Used Dev Size : 1465104320 (1397.23 GiB 1500.27 GB) Array Size : 2930208640 (2794.46 GiB 3000.53 GB) Raid Devices : 5 Total Devices : 5 Preferred Minor : 2 The array was created like this. mdadm -v --create /dev/md2 \ --level=raid10 --layout=o2 --raid-devices=5 \ --chunk=64 --metadata=0.90 \ /dev/sdg2 /dev/sdf2 /dev/sde2 /dev/sdd2 /dev/sdc2 Each of the 5 individual drives have partitions like this. Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057754 Device Boot Start End Blocks Id System /dev/sdc1 2048 34815 16384 83 Linux /dev/sdc2 34816 2930243583 1465104384 fd Linux raid autodetect Backstory So the SATA controller failed in a box I provide some support for. The failure was a ugly and so individual drives fell out of the array a little at a time. While there are backups, we the are not really done as frequently as we really need. There is some data that I am trying to recover if I can. I got additional hardware and I was able to access the drives again. The drives appear to be fine, and I can get the array and filesystem active and mounted (using read-only mode). I am able to access some data on the filesystem and have been copying that off, but I am seeing lots of errors when I try to copy the most recent data. When I am trying to access that most recent data I am getting errors like below which makes me think that the array size discrepancy may be the problem. Mar 14 18:26:04 server kernel: [351588.196299] dm-7: rw=0, want=6619839616, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.196309] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.196313] dm-7: rw=0, want=6619839616, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.199260] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.199264] dm-7: rw=0, want=20647626304, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.202446] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.202450] dm-7: rw=0, want=19973212288, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.205516] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.205520] dm-7: rw=0, want=8009695096, limit=6442450944

  Read the article

• GRUB 2 freezing at OS selection screen, what could be the cause?

  - by Michael Kjörling

  Mains power is somewhat unreliable where I live, so every now and then, the computer gets rebooted when the PSU can't maintain proper voltage during a brown-out or momentary black-out. It's happened a few times recently that when power is restored, the BIOS POST completes successfully, GRUB starts to load and then freezes. I've seen this at the Welcome to GRUB! message, but it seems to happen more often just past the switch to the graphical OS list. At this point, the computer will not respond to anything (arrow keys, control commands, Ctrl+Alt+Del, ...) - it simply sits there displaying this image, seemingly doing nothing more. At that point, turning the computer off using the power button and letting it sit for a while (cooling down?) has allowed it to boot successfully. Turning the computer off and immediately back on seems to give the same result (successful POST then freeze in GRUB). This behavior began recently, although does not seem to be directly correlated with my hard disk woes (although it may be relevant that GRUB resides on that physical disk, I don't know). Once the computer has booted, it runs without a hitch. I know that a "proper" solution would be to invest in a UPS, but what might be causing behavior like this? I was thinking in terms of perhaps the CPU shutting down as a thermal control measure, but if that was the cause then wouldn't I see similar freezes during use (which I do not)? What else could cause freezes apparently closely but not perfectly related to the BIOS handover from POST to OS bootloader? The BIOS settings are to reset to previous power status after a power loss. Since the PC in question is almost always turned on, this means restore to full power status. I have no expansion cards installed that make any BIOS extensions known by screen output during the boot process, at least, but I do have a few expansion cards installed. Haven't made any changes in that regard in a long time, now. I haven't touched GRUB itself for a long time, whether configuration or binaries, so I don't think that's the problem. Also, it doesn't really make sense that a bug in GRUB would manifest itself only once in a blue moon but significantly more often after a power failure.

  Read the article

• Blank Screen After Login on Windows 7

  - by Leigh Riffel

  When unlocking a Windows 7 computer the screen briefly (less than a second) goes blank before showing the screen. Abound once a month (but sometimes within a few days) when I unlock my computer the screen doesn't come back from this brief blackout and stays black. Sometimes after five minutes or so the display will come back. Other times it has been blank for over 20 minutes, so I give up and restart the computer. It seems to happen more often when the computer has been locked for a longer period of time - I lock my computer several times a day, but the problem most happens when I come in at the start of the day. I have updated my video card and monitor drivers. I have two monitors driven by the same graphics card. The computer is a Dell Optiplex 740. When the problem occurs both monitors have a green light on to indicate that they are receiving signal. I've tried unplugging the monitors from the video card and turning the monitors on and off. The screen saver is set to one that is not blank screen. The Windows power settings are set to never turn off the display. When the problem occurs there is no significant disk activity occurring. When the problem occurs I can connect over the network to the hard drive on my computer. When the problem occurs I can't connect over the network with a VNC connection. The VNC client doesn't give an error, but also won't show the screen. The task actually seems to hang as I can see the task, but there is no window for it. This problem occurred when I was running a pre-release version of Windows 7. The hard drive was formatted for release version and the problem still occurs. I've been stopping some of my always running programs to see if one of them may be the culprit, but given the span between failures that will take some time to find the problem if it will even help at all. Some programs I have always running include IE, Firefox, Outlook, Evernote, Kana Reminder, Ditto, Macro Express, Timesnapper, and DisplayFusion. Any ideas appreciated.

  Read the article

• Ububtu server 12.04 auto installation freezes at kickseeding running if ks.cfg has post scripts

  - by john206

  I'm trying to make a custom Ubuntu Server iso file. Kickstart file (ks.cfg) runs smooth when there is no %post in the file and Ubuntu installs correctly with ks configuration. Installation finishes installing base, apt, grub and It echos: Kickseed Running... and it freezes @ 0% I thought may be apt-get update doesnt work in ks file, I tried to install other apps like apache2 but no luck I have created dozen iso images and installed them in Virtual Box.I have been googling for 3 days and checked out ubuntu forums but haven't figured out the issue. I appreciate your help. This is how I made the iso image. My ks.file and txt.cfg files located in isolinux directory: root@ubuntu:/home/work mount -o loop ubuntu-12.04-amd64.iso original-iso/ rsync -a original-iso/ custom-iso/ cp ks.cfg custom-iso/isolinux/ cp txt.cfg custom-iso/isolinux/ chmod -R 777 custom-iso/ #Creating Iso image mkisofs -D -r -V “$IMAGE_NAME” -cache-inodes -J -l -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -o ~/ubuntu-12.04-alternate-custom-amd64.iso custom-iso/ ks.cfg #Generated by Kickstart Configurator #platform=AMD64 or Intel EM64T #System language lang en_US #Language modules to install langsupport en_US #System keyboard keyboard us #System mouse mouse #System timezone timezone America/Los_Angeles #Root password rootpw --iscrypted somethingsomething #Initial user user ubuntu --fullname "ubuntu" --iscrypted --password somethingsomething. #Reboot after installation reboot #Use text mode install text #Install OS instead of upgrade install #Use CDROM installation media cdrom #System bootloader configuration bootloader --location=mbr #Clear the Master Boot Record zerombr yes #Partition clearing information clearpart --all --initlabel #Disk partitioning information part /boot --size 128 --fstype=ext3 --asprimary part / --size 512 --fstype=ext3 --asprimary part swap --size 512 part /tmp --size 512 --fstype=ext3 part /var --size 512 --fstype=ext3 part /usr --size 4096 --fstype=ext3 part /home --size 2048 --fstype=ext3 #System authorization infomation auth --useshadow --enablemd5 #Network information network --bootproto=dhcp --device=eth0 #Firewall configuration firewall --disabled --http --ftp --ssh #X Window System configuration information xconfig --depth=32 --resolution=1024x768 --defaultdesktop=GNOME %post apt-get update mkdir /home/user txt.cfg default autoinstall label autoinstall menu label ^Install Custom Ubuntu Server kernel /install/vmlinuz append file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz quiet ks=cdrom:/isolinux/ks.cfg -- label install menu label ^Install Ubuntu Server kernel /install/vmlinuz append file=/cdrom/preseed/ubuntu-server.seed vga=788 initrd=/install/initrd.gz quiet -- label cloud menu label ^Multiple server install with MAAS kernel /install/vmlinuz append modules=maas-enlist-udeb vga=788 initrd=/install/initrd.gz quiet -- label check menu label ^Check disc for defects kernel /install/vmlinuz append MENU=/bin/cdrom-checker-menu vga=788 initrd=/install/initrd.gz quiet -- label memtest menu label Test ^memory kernel /install/mt86plus label hd menu label ^Boot from first hard disk localboot 0x80

  Read the article

• tproxy squid bridge very slow when cache is full

  - by Roberto

  I have installed a bridge tproxy proxy in a fast server with 8GB ram. The traffic is around 60Mb/s. When I start for first time the proxy (with the cache empty) the proxy works very well but when the cache becomes full (few hours later) the bridge goes very slow, the traffic goes below 10Mb/s and the proxy server becomes unusable. Any hints of what may be happening? I'm using: linux-2.6.30.10 iptables-1.4.3.2 squid-3.1.1 compiled with these options: ./configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --localstatedir=/var/lib --sysconfdir=/etc/squid --libexecdir=/usr/libexec/squid --localstatedir=/var --datadir=/usr/share/squid --enable-removal-policies=lru,heap --enable-icmp --disable-ident-lookups --enable-cache-digests --enable-delay-pools --enable-arp-acl --with-pthreads --with-large-files --enable-htcp --enable-carp --enable-follow-x-forwarded-for --enable-snmp --enable-ssl --enable-async-io=32 --enable-linux-netfilter --enable-epoll --disable-poll --with-maxfd=16384 --enable-err-languages=Spanish --enable-default-err-language=Spanish My squid.conf: cache_mem 100 MB memory_pools off acl manager proto cache_object acl localhost src 127.0.0.1/32 acl localhost src ::1/128 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 acl to_localhost dst ::1/128 acl localnet src 10.0.0.0/8 # RFC1918 possible internal network acl localnet src 172.16.0.0/12 # RFC1918 possible internal network acl localnet src 192.168.0.0/16 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl net-g1 src xxx.xxx.xxx.xxx/24 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow net-g1 from where browsing should be allowed http_access allow localnet http_access allow localhost http_access deny all http_port 3128 http_port 3129 tproxy hierarchy_stoplist cgi-bin ? cache_dir ufs /var/spool/squid 8000 16 256 access_log none cache_log /var/log/squid/cache.log coredump_dir /var/spool/squid refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . I have this issue when the cache is full, but do not really know if it is because of that. Thanks in advance and sorry my english. roberto

  Read the article

• OSX 10.6.6 SSH md5 break-in check

  - by Alex

  Information Recently one of the linux servers that I access was compromised to steal passwords and ssh keys using a modified ssh binary. This lead me to question if the attacker had compromised my OSX Laptop which had ssh access turned on. A sophos virus scan turned up nothing, and I did not have rkhunter installed before the attack, so I could not compare hashes of the system binaries to be sure. However because OSX is relatively standard for each of their major releases, I asked fiends for md5 hashes md5 /usr/bin/ssh and md5 /usr/sbin/sshd as a basic first check to see if there was anything different about my machine. A few emails later I have found the following data: Version (Arch) [N] MD5 (/usr/bin/ssh) MD5 (/usr/sbin/sshd) OSX 10.5.8 (PPC) [3] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.5.8 (intel) [5] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.6.x (intel) [7] 591fbe723011c17b6ce41c537353b059 e781fad4fc86cf652f6df22106e0bf0e OSX 10.6.x (intel) [4] 58be068ad5e575c303ec348a1c71d48b 33dafd419194b04a558c8404b484f650 Mine 10.6.6 (intel) df344cc00a294c91230c65e8b7332a79 b5094ccf4cd074aaf573d4f5df75906a where N is the number of machines with with that MD5, and the last row is my laptop. The sample is relatively heterogeneous spaning a few years of different makes and models of Apples, and different versions of 10.6.x. The different hash for my system made me worried that these binaries might have been compromised. So I made sure that my backup for the week was good, and dived into formatting my system and reinstalling OSX. After reinstalling OSX from the manufacturer DVD, I found that the MD5 hash did not change for either ssh, or sshd. Goal Make sure that my system is does not have any malicious software. Should I be worried that this base install of OSX (with no other software installed) has been compromised? I have also updated my system to 10.6.6 and found no change as well. Other Information I am not sure if this is helpful information, but my laptop is a i7 15 inch MacBook Pro bought in Nov 2010, and here is some output from system_profiler: System Software Overview: System Version: Mac OS X 10.6.6 (10J567) Kernel Version: Darwin 10.6.0 64-bit Kernel and Extensions: No Time since boot: 1:37 Hardware: Hardware Overview: Model Name: MacBook Model Identifier: MacBook6,2 Processor Name: Intel Core i7 Processor Speed: 2.66 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 4 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s Boot ROM Version: MBP61.0057.B0C SMC Version (system): 1.58f16 Sudden Motion Sensor: State: Enabled On the laptop, I find: $ codesign -vvv /usr/bin/ssh /usr/bin/ssh: valid on disk /usr/bin/ssh: satisfies its Designated Requirement $ codesign -vvv /usr/sbin/sshd /usr/sbin/sshd: valid on disk /usr/sbin/sshd: satisfies its Designated Requirement $ ls -la /usr/bin/ssh -rwxr-xr-x 1 root wheel 1001520 Feb 11 2010 /usr/bin/ssh $ ls -la /usr/sbin/sshd -rwxr-xr-x 1 root wheel 1304800 Feb 11 2010 /usr/sbin/sshd $ ls -la /sbin/md5 -r-xr-xr-x 1 root wheel 65232 May 18 2009 /sbin/md5 Update So far I have not gotten an answer about this question, but if you could help by increasing the number of hashes that I can compare against, that would be great. To get hashes, and version numbers, run the following on osx: md5 /usr/bin/ssh md5 /usr/sbin/sshd ssh -V sw_vers

  Read the article

• Ubuntu web server 11.10 ftp/server issue

  - by Nate

  I was wondering if I could get some help with FTP, atleast I'm pretty sure it has to do with FTP. Although it could have to do with something else, I'm not 100% sure.. Now, for fare warning, I'm no ubuntu dominator, I'm pretty newb. Anyway, I've attempted to build a webserver to to test php and what not for a site I'm building. Now everything works, the php, the sql etc. By the way, I built this in VMware, so it's virtual, over a network, so I can access stuff from anywhere. I'm in a college right now so yeah. The one problem I have is this. I go into the terminal, and do ifconfig to find my IP. I get it and go to a browser on a different machine and type that IP in. I get the "index of/" page, where I can browse the website I'm making. I can click through folders and what not. I can click on things and they open up. Now lets say I'm working on my desktop and open up an FTP and drag and drop something into there, go to the IP in the browser again and try to open it. I either get "Server error The website encountered an error while retrieving http://my_server_ip/phpinfo.php. It may be down for maintenance or configured incorrectly. Here are some suggestions: Reload this webpage later." or "Forbidden You don't have permission to access /html.html on this server." But, lets say I make it on the server itself, and try, bam, magic it works. I'm sure I set the permissions to let everyone open and view the files, but maybe I didn't? I'm not sure, and this is where I was hoping I could get some help. By the way, I followed a tutorial on changing the www folder (apache) from /var/www to home/"user"/www. I can't recall how I did that, but it's there and my ftp goes to the home/"user"/www folder. But yeah, any and all help is appreciated. Like I said, I'm really new to this, but I do enjoy attempting to make these servers and learning how they work, so it's not like making this webserver is a project for a class, It's just assisting me in testing stuff for another class and possibly other websites later on down the road. Anyway, anyone who decides to help, thanks so much, I'd really appreciate it. Nate. P.S. I'm using Ubuntu 11.10 desktop edition with a LAMP server

  Read the article

• Install Ubuntu 12.04 in UEFI mode on a HP Pavilion dv6-6c40ca

  - by Marlen T. B.

  I have recently (as of July 2012) bought a HP Pavilion dv6-6c40ca laptop. It came pre-installed with Windows 7 on an MBR. I installed Ubuntu 12.04 on it on a GPT partition in what I think is BIOS emulation mode. I made a BIOS-Grub partition so the install didn't fail. That is what it is for .. right? Now I want to upgrade to UEFI mode. How would I Install Ubuntu 12.04 in UEFI mode on a HP Pavilion dv6-6c40ca. Or is it impossible? My laptop, despite its new age may not be UEFI 2.0+ capable. If it isn't how can I install a software UEFI (i.e. a DUET such as the one by tianocore). Or is this too impossible? A link to my laptop's specs is: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03137924&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=5218530 My laptop should have a UEFI given this link from HP http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01442956#N218. And from the link I draw a quote: That means most notebooks distributed with Windows Vista, and all notebooks distributed with Windows 7, have the UEFI environment. My laptop had Windows 7 Home Premium pre-installed. OK. Following the comments so far -- NOTE: I am trying to do this on an external drive so I can see if it works. I have partitioned the drive using GParted as a GPT drive. Created a 200MB partition at the beginning of the drive with a FAT32 file system. Given the 200MB partition a label of "EFI". Set the boot flag on the 200MB partition. What should a do next to install Ubuntu 12.04? Given the link: https://help.ubuntu.com/community/UEFIBooting#Selecting_the_.28U.29EFI_Graphic_Protocol In my first read through (just to see if I will understand everything before I start) I get to step 2.3 Install GRUB2 in (U)EFI systems The first line is Boot into Linux (any live ISO) preferably in UEFI mode. Um .. how do you tell what mode your live CD is in?! And how do you change it if the mode is wrong?

  Read the article

• Properly Configured Rsyslog on CentOS

  - by Gaia

  I'm trying to configure Rsyslog 5.8.10 on CentOS 6.4 to send Apache's error and access logs to a remote server. It's working, but I have a couple questions. A) I would like to use as few queues (and resources) as possible. I send error logs to server A, send access logs to server A, send both logs in one stream to server B. Should I specify one queue per external service (2 queues) or one queue per stream (3 queues, as I have now)? This is what I have: $ActionResumeInterval 10 $ActionQueueSize 100000 $ActionQueueDiscardMark 97500 $ActionQueueHighWaterMark 80000 $ActionQueueType LinkedList $ActionQueueFileName logglyaccessqueue $ActionQueueCheckpointInterval 100 $ActionQueueMaxDiskSpace 1g $ActionResumeRetryCount -1 $ActionQueueSaveOnShutdown on $ActionQueueTimeoutEnqueue 10 $ActionQueueDiscardSeverity 0 if $syslogtag startswith 'www-access' then @@logs-01.loggly.com:514;logglyaccess $ActionResumeInterval 10 $ActionQueueSize 100000 $ActionQueueDiscardMark 97500 $ActionQueueHighWaterMark 80000 $ActionQueueType LinkedList $ActionQueueFileName logglyerrorsqueue $ActionQueueCheckpointInterval 100 $ActionQueueMaxDiskSpace 1g $ActionResumeRetryCount -1 $ActionQueueSaveOnShutdown on $ActionQueueTimeoutEnqueue 10 $ActionQueueDiscardSeverity 0 if $syslogtag startswith 'www-errors' then @@logs-01.loggly.com:514;logglyerrors $DefaultNetstreamDriverCAFile /etc/syslog.papertrail.crt # trust these CAs $ActionSendStreamDriver gtls # use gtls netstream driver $ActionSendStreamDriverMode 1 # require TLS $ActionSendStreamDriverAuthMode x509/name # authenticate by hostname $ActionResumeInterval 10 $ActionQueueSize 100000 $ActionQueueDiscardMark 97500 $ActionQueueHighWaterMark 80000 $ActionQueueType LinkedList $ActionQueueFileName papertrailqueue $ActionQueueCheckpointInterval 100 $ActionQueueMaxDiskSpace 1g $ActionResumeRetryCount -1 $ActionQueueSaveOnShutdown on $ActionQueueTimeoutEnqueue 10 $ActionQueueDiscardSeverity 0 *.* @@logs.papertrailapp.com:XXXXX;papertrailstandard & ~ B) Does a queue block get used over and over by every send action that follows it or only by the first one or only until it encounters a send followed by a discard action (~)? C) How do I reset a queue block so that an upcoming send action does not use a queue at all? D) Does a TLS block get used over and over by every send action that follows it or only by the first one or only until it encounters a send followed by a discard action (~)? E) How do I reset a TLS block so that an upcoming send action does not use TLS at all? F) If I run rsyslog -N1 I get: rsyslogd -N1 rsyslogd: version 5.8.10, config validation run (level 1), master config /etc/rsyslog.conf rsyslogd: WARNING: rsyslogd is running in compatibility mode. Automatically generated config directives may interfer with your rsyslog.conf settings. We suggest upgrading your config and adding -c5 as the first rsyslogd option. rsyslogd: Warning: backward compatibility layer added to following directive to rsyslog.conf: ModLoad immark rsyslogd: Warning: backward compatibility layer added to following directive to rsyslog.conf: MarkMessagePeriod 1200 rsyslogd: Warning: backward compatibility layer added to following directive to rsyslog.conf: ModLoad imuxsock rsyslogd: End of config validation run. Bye. Where do I place the -c5 so that it doesnt run in compatibility mode anymore?

  Read the article

• Passive FTP on Windows Server 2008 R2 using the IIS7 FTP-Server

  - by ntor

  Hello serverFault-community! During the last few days I have been setting up a Windows Server 2008 R2 in a VMware. I installed the standard FTP-Server on it by using the Webserver (IIS)-role. Everything works fine with accessing my FTP-Site with ftp://localhost in Firefox. I can also get access to it via the local IP of my Server. Actually everything works fine in my LAN. But here's my problem: I want to get access "from outside", using the external IP or a dyndns-URL. I have a LinkSys-Router in front of my Server, therefore I'm forwarding all the important ports. If you may now think "this idiot has probably forgotten some ports", I must dissappoint you. It even works getting access to my Server-Website and messing around in some WebInterfaces. The problem is my passive FTP (active works for me). I always get a timeout, when e.g. FileZilla waits for a response to the LIST-command. The one big thing I don't get, is, why my Server sends a response to the PASV-command, naming a port like 40918, even if I have restricted the data port range for my passive FTP ( in the IIS-Manager) to e.g. [5000-5009]. I simply don't want to open and forward all possible data ports! And another thing is, I can't specify a static external IP-adress for my server, since I don't own any. I hope I have explained my problem in a comprehensible way. If not, simply ask by posting a comment! LG ntor PS: I have already mainly tried following articles: Out Of Band FTP 7 shows "Operation timed out" How to Configure Windows Firewall for a Passive Mode FTP Server ServerFault --- Passive ftp on Server 2008 --- EDIT: --- There is one idea rising up in my mind: When I use FileZilla to connect by passive mode I always get something like this: 227 Entering Passive Mode (192,168,1,102,160,86) According to a Rhinosof-article FZ tries to connect on port "160*256+86 = 41046", although I have restricted the data ports (as mentioned above). Could this be caused by the router, that doesn't forward out-ports directly, but uses different ones? (-- The IP-Adress given is the local one, since I'm not able to define a static external in the IIS-Mgr)

  Read the article

• setting up a basic mod_proxy virtual host

  - by SevenProxies

  I'm trying to set up a basic virtual host to proxy all requests to test.local to a WEBrick server I have running on 127.0.0.1:8080 while keeping all requests to localhost going to my static files in /var/www. I'm running Ubuntu 10.04. I have libapache2-mod-proxy-html installed and I have the module enabled with a2enmod proxy. I also have my virtual host enabled. However, whenever I go to test.local I always get a cryptic 500 server error and all my logs are telling me is: [Thu Mar 03 01:43:10 2011] [warn] proxy: No protocol handler was valid for the URL /. If you are using a DSO version of mod_proxy, make sure the proxy submodules are included in the configuration using LoadModule. Here's my virtual host: <VirtualHost test.local:80> LoadModule proxy_module /usr/lib/apache2/modules/mod_proxy.so ServerAdmin webmaster@localhost ServerName test.local ProxyPreserveHost On # prevents this folder from being proxied ProxyPass /static ! DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> <Proxy *> Order allow,deny Allow from all </Proxy> ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined and here's my settings for mod_proxy: <IfModule mod_proxy.c> #turning ProxyRequests on and allowing proxying from all may allow #spammers to use your proxy to send email. ProxyRequests Off <Proxy *> # default settings #AddDefaultCharset off #Order deny,allow #Deny from all ##Allow from .example.com AddDefaultCharset off Order allow,deny Allow from all </Proxy> # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block ProxyVia On </IfModule> Does anybody know what I'm doing wrong? Thanks

  Read the article

• What Remote Desktop Solution Do You Use To Service Your Clients' PCs? [closed]

  - by Sootah

  Possible Duplicate: What’s the best Remote Desktop Application? I am the owner of a local computer repair business that primarily services its clients on-site. On the occasions that we do service the machines in the office we generally have one of our techs pick the computer up while they are out and about and bring it back with them. Only rarely will we require the customer to bring us the computer themselves. In order to reduce costs, be much more efficient, and potentially expand our market far beyond what would be feasible with travel required; I am looking at ways that we can service our clients remotely whenever possible. What we're in need of is a solid remote desktop application that will be incredibly easy for our customers to connect to, as well as be robust enough that we don't need the client babysitting the computer during the entire repair. Ideally I would like to use a web-based solution so that we don't have to walk the customers through installing, connecting, and configuring it over the phone. This would be unacceptable because of the level of service they are used to. Effectively we'd want them to be able to just go to a URL, enter a PIN or something, and then they are connected and ready to rumble. (Obviously the option to just email them a link that'd do all this for them would be what we'd be aiming for) Along with the ease of use factor, we would need the product to not require any further intervention on the part of the client after we have connected. Nobody is going to be happy if we have to call them every 15 minutes so they can reconnect to us every time we reboot - so auto-reconnect is an absolute must. The only product I know of right now that does any of this is LogMeIn Rescue. It allows unattended access, the applet is lightweight and installs quickly, and the customer can either enter a PIN on the site or just click a link emailed to them in order to connect. The only real downside I see to LogMeIn Rescue is that it's $120.00/month per technician. While we'd ultimately end up saving far more than that per month just in fuel costs alone, I'd like to explore any other options out there that I may not have come across. Are there any equally good products out there? If so what are they, why do you recommend them, how have you been utilizing them yourself, and what do they cost?

  Read the article

• Need to increase nginx throughput to an upstream unix socket -- linux kernel tuning?

  - by Ben Lee

  I am running an nginx server that acts as a proxy to an upstream unix socket, like this: upstream app_server { server unix:/tmp/app.sock fail_timeout=0; } server { listen ###.###.###.###; server_name whatever.server; root /web/root; try_files $uri @app; location @app { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto $scheme; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://app_server; } } Some app server processes, in turn, pull requests off /tmp/app.sock as they become available. The particular app server in use here is Unicorn, but I don't think that's relevant to this question. The issue is, it just seems that past a certain amount of load, nginx can't get requests through the socket at a fast enough rate. It doesn't matter how many app server processes I set up, it doesn't even matter what the app is (tried it with a dummy app with just a single endpoint that returned an empty page with status 404). The bottleneck seems to be the socket, not the app. I'm getting a flood of these messages in the nginx error log: connect() to unix:/tmp/app.sock failed (11: Resource temporarily unavailable) while connecting to upstream Many requests result in status code 502, and those that don't take a long time to complete. The nginx write queue stat hovers around 1000. Anyway, I feel like I'm missing something obvious here, because this particular configuration of nginx and app server is pretty common, especially with Unicorn (it's the recommended method in fact). Are there any linux kernel options that needs to be set, or something in nginx? Any ideas about how to increase the throughput to the upstream socket? Something that I'm clearly doing wrong? Additional information on the environment: $ uname -a Linux app1 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ ruby -v ruby 1.9.3p194 (2012-04-20 revision 35410) [x86_64-linux] $ unicorn -v unicorn v4.3.1 $ nginx -V nginx version: nginx/1.2.1 built by gcc 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) TLS SNI support enabled Current kernel tweaks: net.core.rmem_default = 65536 net.core.wmem_default = 65536 net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 65536 16777216 net.ipv4.tcp_mem = 16777216 16777216 16777216 net.ipv4.tcp_window_scaling = 1 net.ipv4.route.flush = 1 net.ipv4.tcp_no_metrics_save = 1 net.ipv4.tcp_moderate_rcvbuf = 1 net.core.somaxconn = 8192 net.netfilter.nf_conntrack_max = 131072

  Read the article

• JNDI Datasource Problem on Tomcat 6, Hibernate

  - by Asuman AKYILDIZ

  I am using Tomcat 6 as application server, Struts-Hibernate and MyEclipse 6.0. My application uses JDBC driver but I should modify it to use JNDI Datasource. I followed steps as described in tomcat 6.0 howto tutorial. I defined my resource in tomcatconf: <Resource name="jdbc/ats" global="jdbc/ats" auth="Container" type="javax.sql.DataSource" driverClassName="oracle.jdbc.OracleDriver" url="jdbc:oracle:thin:@//localhost:1521/MISDEV" username="TEST" password="TEST" maxActive="20" maxIdle="10" maxWait="-1" validationQuery="SELECT 1 from dual" removeAbandoned="true" removeAbandonedTimeout="30" logAbandoned="false"/> I gave reference in my application web.xml: <resource-ref> <description>Oracle Datasource example</description> <res-ref-name>jdbc/ats</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> And I defined datasource-dialect in my hibernate-cfg.xml <property name="connection.datasource">java:comp/env/jdbc/ats</property> <property name="dialect">org.hibernate.dialect.Oracle9Dialect</property> But when I create hibernate session, it can not open the connection: 09:18:11,322 ERROR JDBCExceptionReporter:72 - Connections could not be acquired from the underlying database! org.hibernate.exception.GenericJDBCException: Cannot open connection I also tried to set the properties at runtime: Configuration configuration = new Configuration(); configuration.setProperty("hibernate.dialect", "org.hibernate.dialect.Oracle9Dialect"); //configuration.setProperty("hibernate.connection.datasource", "java:comp/env/jdbc/ats"); configuration.setProperty("hibernate.current_session_context_class", "thread"); configuration.setProperty("hibernate.connection.provider_class", "org.hibernate.connection.C3P0ConnectionProvider"); configuration.setProperty("hibernate.show_sql", "true"); sessionFactory = configuration.configure().buildSessionFactory(); It does not open connection again. But, when I use JDBC driver it works: Configuration configuration = new Configuration(); configuration.setProperty("hibernate.dialect", "org.hibernate.dialect.Oracle9Dialect"); //configuration.setProperty("hibernate.connection.datasource", "java:comp/env/jdbc/ats"); configuration.setProperty("hibernate.connection.url", "jdbc:oracle:thin:@//localhost:1521/MISDEV"); configuration.setProperty("hibernate.connection.username", "test"); configuration.setProperty("hibernate.connection.password", "test"); configuration.setProperty("hibernate.connection.driver_class", "oracle.jdbc.OracleDriver"); configuration.setProperty("hibernate.transaction.factory_class", "org.hibernate.transaction.JDBCTransactionFactory"); configuration.setProperty("hibernate.current_session_context_class", "thread"); configuration.setProperty("hibernate.connection.provider_class", "org.hibernate.connection.C3P0ConnectionProvider"); configuration.setProperty("hibernate.show_sql", "true"); sessionFactory = configuration.configure().buildSessionFactory(); I have been searching for 3 days and no success. What may be de problem?

  Read the article

• can not connect through SCP, but SSH connections works

  - by Joe Cabezas

  i am trying to connect to my server to transfer file using scp: $ scp -v -r -P <port> <user>@<host>:~/dir/ dir/ this is the output: OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/joe/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: Connecting to <host> [<host>] port <port>. debug1: Connection established. debug1: identity file /Users/joe/.ssh/identity type -1 debug1: identity file /Users/joe/.ssh/id_rsa type -1 debug1: identity file /Users/joe/.ssh/id_dsa type -1 ssh_exchange_identification: Connection closed by remote host but connecting via SSH works fine: $ ssh <user>@<host> -p <port> <user>@<host>'s password: <user>@<host>:~$ OK what can be wrong with this? my /etc/ssh/sshd_config file on the host is: # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for Port <port> # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 120 PermitRootLogin yes StrictModes yes RSAAuthentication yes PubkeyAuthentication no #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes

  Read the article

• Why Does Wireless Gear Degrade Over Time?

  - by bahamat

  I saw this originally posted on slashdot, but their comment format is not conducive to actually getting a correct answer. Having directly experienced this phenomenon myself, I'm now asking here where I think I can actually get an educated answer. Here's the original question verbatim: Lately I have replaced several home wireless routers because the signal strength has been found to be degraded. These devices, when new (2+ years ago) would cover an entire house. Over the years, the strength seems to decrease to a point where it might only cover one or two rooms. Of the three that I have replaced for friends, I have not found a common brand, age, etc. It just seems that after time, the signal strength decreases. I know that routers are cheap and easy to replace but I'm curious what actually causes this. I would have assumed that the components would either work or not work; we would either have a full signal or have no signal. I am not an electrical engineer and I can't find the answer online so I'm reaching out to you. Can someone explain how a transmitter can slowly go bad? Common (incorrect, but repeated) answers from slashdot include: Back then your neighbors didn't have wifi, now they do. They drowning you out. I don't think this is likely because replacing the access point with a new one and using the same frequencies solves the problem. Older devices had low transmit power. Crank that baby. As mentioned by a FreeBSD wireless developer this violates regulations and can physically damage the equipment. It was also mentioned that higher power in one direction is not necessarily reciprocated. This shows higher bars, but not necessarily a better connection. Manufacturers make cheap crap designed to wear out. This one actually may be legitimate although it is overly broad. What specifically causes damage over time? Heat? Excessive power? So can anyone provide an informed answer on this? Is there any way to fix these older access points?

  Read the article

• Client A can ping server S, but client B cannot

  - by Soundar Rajan

  I moved the question to here from stackoverflow.com http://stackoverflow.com/questions/2917569/unable-to-ping-server-from-client-b-but-able-to-ping-from-client-a-please-help I am trying to configure a IIS 6.0/Windows Server 2003 web server with a ASP.net application. When I try to ping the server from client computer A I get the following: PING 74.208.192.xxx ==> Ping fails PING 74.208.192.xxx:80 ==> Ping succeeds! From client computer B, BOTH the pings fail. PING 74.208.192.xxx ==> Ping fails PING 74.208.192.xxx:80 ==> Ping fails with a message "Ping request could not find host 74.208.192.xxx:80" Both clients A and B are on the same subnet. The server is outside (a virtual server hosted by an ISP) I have an ASP.NET application in a virtual directory on the server. In IE or firefox, if I enter http://74.208.192.xxx/subdir/subdir/../Default.aspx, it works from both the clients! The server has default firewall settings but web server enabled (Port 80 is open). From client A (note the different 'reply to' address when the ping succeeds. C:\Program Files\Microsoft Visual Studio 9.0\VC>ping 74.208.192.xx Pinging 74.208.192.xx with 32 bytes of data: Request timed out. ... Request timed out. Ping statistics for 74.208.192.xx: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\Program Files\Microsoft Visual Studio 9.0\VC>ping 74.208.192.xx:80 Pinging 74.208.192.xx:80 [208.67.216.xxx] with 32 bytes of data: Reply from 208.67.216.xxx: bytes=32 time=35ms TTL=54 ... Reply from 208.67.216.xxx: bytes=32 time=33ms TTL=54 Ping statistics for 208.67.216.xxx: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 32ms, Maximum = 54ms, Average = 38ms From client B C:\Documents and Settings\user>ping 74.208.192.81 Pinging 74.208.192.81 with 32 bytes of data: Request timed out. ... Request timed out. Ping statistics for 74.208.192.81: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\Documents and Settings\user>ping 74.208.192.81:80 Ping request could not find host 74.208.192.81:80. Please check the name and try again. My main problem is I have a web service (asmx) file and the web service client program is not able to access it from client B, but able to access it from client A. I am trying to find out why and thought this ping issue may shed some light. I can ping yahoo.com both the computers.

  Read the article

• Old operational master still thinks it is the "one"

  - by Doug

  Hi there, I have a domain with 3 AD servers for now i'll just call them: AD01 (Win 2008 GC, Operations master) AD02 (Win 2008 GC) AD03 (Win 2003 GC) A couple of months there was some hardware issues with AD01 so the operations master, PDC and Infrastructure Master was moved to AD02. All machines where on while this was happening. AD01 (Win 2008 GC) AD02 (Win 2008 GC, Operations master) AD03 (Win 2003 GC) AD01 was then shutdown for a month. Upon starting this machine up with replaced hardware (NIC and RAID card) i now have a weird problem. AD01 Thinks it is operations master still in AD on the local box AD02 & AD03 Thinks AD02 is operations master in AD on both boxes When running DCDIAG on AD01 i get a number of issues (listed below) When running "dcdiag /test:advertising" on AD01: Doing primary tests Testing server: Default-First-Site-Name\AD01 Starting test: Advertising Warning: DsGetDcName returned information for \\ad02.domain.local, when we were trying to reach AD01. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... AD01 failed test Advertising Running partition tests on : ForestDnsZones Running partition tests on : DomainDnsZones Running partition tests on : Schema Running partition tests on : Configuration Running partition tests on : domain Running enterprise tests on : domain.local When running "dcdiag" on AD01 i get the following errors (excerpt of the Final output): Testing server: Default-First-Site-Name\AD01 Starting test: Advertising Warning: DsGetDcName returned information for \\ad02.domain.local, when we were trying to reach AD01. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... AD01 failed test Advertising Starting test: FrsEvent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=domain,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=domain,DC=local Starting test: Replications [Replications Check,Replications Check] Inbound replication is disabled. To correct, run "repadmin /options AD01 -DISABLE_INBOUND_REPL" [Replications Check,AD01] Outbound replication is disabled. To correct, run "repadmin /options AD01 -DISABLE_OUTBOUND_REPL" So the problem appeasr to be that when i moved the operations master, AD01 never got the memo, and now that it's started up, all the other AD servers don't think its the boss anymore when it trys to replicate etc. So i really need to manually update AD01 so that it knows who the operations master, instrastructure and PDC is - but i'm not having any luck I've been googling for nearly a day and all solutions lead to "the cake is a lie" Your ninja skills will be greatly appreciated

  Read the article

• Magento - Users unable to login from corporate networks with Bluecoat / F5 Load balancers

  - by user1330440

  Hoping someone has come across this issue before with Magento and corporate clients. We have two clients for our Magento site who both have their internal networks setup using bluecoat security devices and F5 load balancers. Some users within these networks are unable to login to Magento - Magento eventually is sending a 302 redirect to /index.php/ when users attempt to log in. Through our testing, the problem appears to be isolated to this setup - we can log into the accounts in question from anywhere outside of these networks without issue, and if the client tries to access the site without going through the F5 load balancer, they are able to log in successfully. Strangely enough, the issue only started occurring for the two sites the day after we introduced a system upgrade which added a new site to the Magento installation. The system upgrade should not have affected any standard login functionality, and as said, the problem does not appear to be with the users in question, but with where the users are accessing the site from. Initially we thought the issue might have something to do with communications between the client's networks and the network which the server was hosted on, so we've tried moving the server to different hosts, but this has not helped. I'm currently waiting for more info from the clients on exact devices / models used in their network setup. I will update this post if more information becomes avaliable. Magento version is enterprise edition of ver. 1.9.0.0 Does anyone know of any tucked away Magento settings that might be able to cause this kind of behavior? Experience with this kind of set-up and ideas for things to look at? All help and ideas for things to follow-up would be appreciated - as this is a current production issue for a large number of users. I will respond asap with any requests for additional information on the topic, but currently am not able to disclose any identifying information on the project in question, and/or the clients experiencing issues. Thanks in advance for any assistance offered :) Note: This question has also been posted on the Magento forums: http://www.magentocommerce.com/boards/viewthread/277917/ And also on Stack overflow (Moved here as a commenter thought this site may be better suited): http://stackoverflow.com/questions/10133978/magento-users-unable-to-login-from-corporate-networks-with-bluecoat-f5-load

  Read the article

• Why is site serving different SSL certs to different browsers?

  - by TRiG

  The SSL certificate on menswearireland.com and on www.menswearireland.com works fine on Safari, Chrome, SeaMonkey, K-Meleon, QtWeb, Firefox, and Opera. However, Internet Explorer claims that there is an error: The security certificate presented by this website was not issued by a trusted certificate authority. The security certificate presented by this website was issued for a different website's address. Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server. Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.0; Trident/5.0) Another site hosted on the same managed server shows no errors: achill-fieldschool.com and www.achill-fieldschool.com work fine on IE, even though as far as I can tell the certificate is set up identically. What am I doing wrong? This is a LAMPP server running Plesk. It looks like the server is showing different certificates to different clients. To some clients it shows a RapidSSL certificate made out to www.menswearireland.com with menswearireland.com as a valid alternative name. To other clients, it shows a Parallels Panel certificate, made out to Parallels Panel. Here are results from a few different online SSL checkers: most say it's fine, while two show errors. Three online checkers say it's valid Comodo SSL Check shows it as valid DigiCert SSL Check shows it as valid SSL Shopper SSL Check shows it as valid Common name: www.menswearireland.com SANs: www.menswearireland.com, menswearireland.com Valid from October 2, 2012 to November 4, 2013 Serial Number: 559425 (0x88941) Signature Algorithm: sha1WithRSAEncryption Issuer: RapidSSL CA Another online checker seems to see a completely different certificate GeoCerts SSL Check shows it as invalid Common name: Parallels Panel Organization: Parallels Valid from August 15, 2012 to August 15, 2013 Issuer: Parallels Panel Another online checker sees more than one certificate Symantic SSL Check shows it as invalid The certificate installation checker connected to the Web server and read its certificates, but could not determine which is the primary certificate for the Web server. Incidentally, on both menswearireland.com and achill-fieldschool.com the homepage will redirect from HTTPS to HTTP. To see SSL details, visit the page /account on both (that page will redirect from HTTP to HTTPS). I’ve found more information in a more detailed online SSL checker. https://www.ssllabs.com/ssltest/analyze.html?d=menswearireland.com This site works only in browsers with SNI support My understanding is that SNI (RFC 6066) is a method for putting many SSL sites on one shared IP address and port. This does not work on Internet Explorer on older versions of Windows (this has to do with the version of Windows, not the version of Internet Explorer). However, all our SSL sites are on a unique IP address, so we shouldn’t need SNI.

  Read the article

• chkdsk, SeaTools, and "does not have enough space to replace bad clusters"

  - by Zian Choy

  When I tried to do a Windows Vista Complete PC Backup, I received an error message that blathered about bad sectors. Then, when I ran chkdsk /r on the destination drive, this is what I got: C:\Windows\system32>chkdsk /R E: The type of the file system is NTFS. Volume label is Desktop Backup. CHKDSK is verifying files (stage 1 of 5)... 822016 file records processed. File verification completed. 1 large file records processed. 0 bad file records processed. 0 EA records processed. 0 reparse records processed. CHKDSK is verifying indexes (stage 2 of 5)... 848938 index entries processed. Index verification completed. 0 unindexed files processed. CHKDSK is verifying security descriptors (stage 3 of 5)... 822016 security descriptors processed. Security descriptor verification completed. 13461 data files processed. CHKDSK is verifying file data (stage 4 of 5)... The disk does not have enough space to replace bad clusters detected in file 239649 of name . The disk does not have enough space to replace bad clusters detected in file 239650 of name . The disk does not have enough space to replace bad clusters detected in file 239651 of name . An unspecified error occurred.f 822000 files processed) Yet, when I ran the SeaTools short & long generic tests on the Seagate disk, I didn't receive any errors. I know that I could reformat the disk and try running chkdsk /r again but I'd prefer to avoid waiting 4 hours in the hope that the problem was magically fixed. On the other hand, if I RmA the drive to Seagate, I have no SeaTools error number to use and they may claim that the drive is just fine. What should I try to do next? Side frustration: There is plenty of free hard drive space. The E: partition has 182 GB free.

  Read the article

• backup of KVM VM's running on Ubuntu 12.4.1 precise edition from a remote machine

  - by Dr. Death

  I am creating a library API which will take the backup of all the VM's running on KVM hypervisor. My VM's can be of any type. I am taking this backup from a remote machine and need to put the backup at remote server. I have KVM, Libvirt installed on my system. Some of my VM's are LVM based and some are normal VM's running on KVM. I research and found out an excellent perl script for taking the backup http://pof.eslack.org/2010/12/23/best-solution-to-fully-backup-kvm-virtual-machines/ but since I am developing this library in C++ I cannot use it however it has given me a good understanding of how it will work. One thing I didnot able to sort out is if my VM's are not created using virt-manager or are created using any other tool them virsh system list command does not give them in the list of running VM's however they are running perfectly on my KVM server. Is there a way to list these VM's in my system list anyhow? secondly, when I am taking backup from the remote machine I am getting out of my ssh mode as soon as my libvirt command finishes and for every command I need to ssh again, Is there a way that I do not need to ssh each and every time? I have already used the rsa key for ssh but when once my command finishes my control moves to the remote machine again and try to find out my source VM location in remote machine's local drives which in turn fails it. here is the main problem I am facing. also for the LVM based VM I am able to take the live backup but for non LVM based my machines are getting suspended and not been able to take the live backup. Since my library will work on the remote machine only I might not know the VM's configruation on the KVM server. so need to make it consistent for all the VM's. Please share any thing related to this issue so that I may be able to take the live backup of the non lvm vm's also. I'll update my working and any research findings time to time to all of you. Thanks in advance for your suggestions in these regards.

  Read the article

• HT Link Sync Error after Ubuntu 10.04 LTS Installation

  - by marklab

  Update 1 I just assembled an exact replica of this server, and successfully installed Ubuntu 10.04 LTS in a RAID10 configuration. The success was confirmed by a login to the initial account. There must be a hardware component that is faulty. Since the error mentions HT, which I believe to be Hyper Threading, I will start with the CPUs. Please indicate if this error is more strongly associated with any other piece of hardware. Or make a recommendation of another approach that would be good for this issue. Issue I was attempting to install Ubuntu 10.04 LTS on this system with the board RAID10 configured. However, the installation failed at the partitioning stage by rebooting the system. Upon reboot, there is an error report after POST listing the following: Node0: NB WatchDog Timer Error Node1: HT Link Sync Error Node2: HT Link Sync Error ... Node7: HT Link Sync Error Press F1 to continue/resume. After pressing F1 the system will boot from the Ubuntu 10.04 LTS installation disc. However, it will fail at the same stage, and go through the same process from there. Hardware CPU: AMD OPTERON X12 6172 G34 2.1G 18MB Motherboard: Supermicro H8QG6-F HDD: WD Caviar Green 2TB 5.4K RPM Troubleshooting I disabled RAID10 on the system, and installed the Ubuntu on a single drive. It installed successfully. I then went back to a RAID10 setup and attempted to install on the system again, and was able to make it through the partitioning stage. However, upon reboot, the system reported: Error: file not found, and then booted me into the Grub Rescue console. I feel I have aggravated the problem at this point because when I attempted to install from the boot disc again, the system reboots upon hitting enter to even start the installation process. It does the same thing when trying to boot from an Ubuntu 11 disc. I have not been able to find any information on this HT Link Sync Error, which I feel may have started the problems I am experiencing now with the installation of the OS. I am also aware that Ubuntu is said not to be supported by the motherboard according to Supermicro's site. However, since I was able to install it successfully on a single drive, I do not believe it is incompatible. I would like to know a reason for why it's failing to install on/off.

  Read the article

• why i failed to build vsftp?

  - by hugemeow

  make, then failed with the following message. the main point is /lib/libcap.so.1: could not read symbols: File in wrong format, confusing... gcc -c readwrite.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c opts.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c ssl.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c sslslave.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c ptracesandbox.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c ftppolicy.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c sysutil.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c sysdeputil.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -o vsftpd main.o utility.o prelogin.o ftpcmdio.o postlogin.o privsock.o tunables.o ftpdataio.o secbuf.o ls.o postprivparent.o logging.o str.o netstr.o sysstr.o strlist.o banner.o filestr.o parseconf.o secutil.o ascii.o oneprocess.o twoprocess.o privops.o standalone.o hash.o tcpwrap.o ipaddrparse.o access.o features.o readwrite.o opts.o ssl.o sslslave.o ptracesandbox.o ftppolicy.o sysutil.o sysdeputil.o -Wl,-s `./vsf_findlibs.sh` /lib/libcap.so.1: could not read symbols: File in wrong format collect2: ld returned 1 exit status make: *** [vsftpd] Error 1 [mirror@hugemeow vsftpd]$ ls /lib/libc libc-2.5.so libcap.so.1.10 libcidn.so.1 libcom_err.so.2.1 libcrypto.so.0.9.8e libcrypt.so.1 libcap.so.1 libcidn-2.5.so libcom_err.so.2 libcrypt-2.5.so libcrypto.so.6 libc.so.6 [mirror@hugemeow vsftpd]$ ls /lib/libc libc-2.5.so libcap.so.1.10 libcidn.so.1 libcom_err.so.2.1 libcrypto.so.0.9.8e libcrypt.so.1 libcap.so.1 libcidn-2.5.so libcom_err.so.2 libcrypt-2.5.so libcrypto.so.6 libc.so.6 [mirror@hugemeow vsftpd]$ ls /lib/libcap.so.1 -l lrwxrwxrwx 1 root root 14 Mar 20 2012 /lib/libcap.so.1 -> libcap.so.1.10 [mirror@hugemeow vsftpd]$ ls /lib/libcap.so.1 -lh lrwxrwxrwx 1 root root 14 Mar 20 2012 /lib/libcap.so.1 -> libcap.so.1.10 [mirror@hugemeow vsftpd]$ ls /lib/libcap.so.1 -lhL -rwxr-xr-x 1 root root 12K Mar 15 2007 /lib/libcap.so.1 this may have something to do with 64 bit system, but i have make modification to vsf_findlibs.sh 48 # Look for libcap (capabilities) 49 if locate_library /lib64/libcap.so.1; then 50 echo "/lib/libcap.so.1"; 51 elif locate_library /lib64/libcap.so.2; then 52 echo "/lib/libcap.so.2"; 53 else 54 # locate_library /usr/lib/libcap.so && echo "-lcap"; 55 # locate_library /lib/libcap.so && echo "-lcap"; 56 locate_library /lib64/libcap.so.1 && echo "-lcap"; 57 fi but make failed with the same error, why?

  Read the article

• LUKS with LVM, mount is not persistent after reboot

  - by linxsaga

  I have created a Logical vol and used luks to encrypt it. But while rebooting the server. I get a error message (below), therefore I would have to enter the root pass and disable the /etc/fstab entry. So mount of the LUKS partition is not persistent during reboot using LUKS. I have this setup on RHEL6 and wondering what i could be missing. I want to the LV to get be mount on reboot. Later I would want to replace it with UUID instead of the device name. Error message on reboot: "Give root password for maintenance (or type Control-D to continue):" Here are the steps from the beginning: [root@rhel6 ~]# pvcreate /dev/sdb Physical volume "/dev/sdb" successfully created [root@rhel6 ~]# vgcreate vg01 /dev/sdb Volume group "vg01" successfully created [root@rhel6 ~]# lvcreate --size 500M -n lvol1 vg01 Logical volume "lvol1" created [root@rhel6 ~]# lvdisplay --- Logical volume --- LV Name /dev/vg01/lvol1 VG Name vg01 LV UUID nX9DDe-ctqG-XCgO-2wcx-ddy4-i91Y-rZ5u91 LV Write Access read/write LV Status available # open 0 LV Size 500.00 MiB Current LE 125 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 [root@rhel6 ~]# cryptsetup luksFormat /dev/vg01/lvol1 WARNING! ======== This will overwrite data on /dev/vg01/lvol1 irrevocably. Are you sure? (Type uppercase yes): YES Enter LUKS passphrase: Verify passphrase: [root@rhel6 ~]# mkdir /house [root@rhel6 ~]# cryptsetup luksOpen /dev/vg01/lvol1 house Enter passphrase for /dev/vg01/lvol1: [root@rhel6 ~]# mkfs.ext4 /dev/mapper/house mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) Stride=0 blocks, Stripe width=0 blocks 127512 inodes, 509952 blocks 25497 blocks (5.00%) reserved for the super user First data block=1 Maximum filesystem blocks=67633152 63 block groups 8192 blocks per group, 8192 fragments per group 2024 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409 Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 21 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. [root@rhel6 ~]# mount -t ext4 /dev/mapper/house /house PS: HERE I have successfully mounted: [root@rhel6 ~]# ls /house/ lost+found [root@rhel6 ~]# vim /etc/fstab -> as follow /dev/mapper/house /house ext4 defaults 1 2 [root@rhel6 ~]# vim /etc/crypttab -> entry as follows house /dev/vg01/lvol1 password [root@rhel6 ~]# mount -o remount /house [root@rhel6 ~]# ls /house/ lost+found [root@rhel6 ~]# umount /house/ [root@rhel6 ~]# mount -a -> SUCCESSFUL AGAIN [root@rhel6 ~]# ls /house/ lost+found Please let me know if I am missing anything here. Thanks in advance.

  Read the article

< Previous Page | 772 773 774 775 776 777 778 779 780 781 782 783  | Next Page >