Search Results

Search found 33980 results on 1360 pages for 'ubuntu tips tweaks'.

Page 78/1360 | < Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

  • Ubuntu Server Wireless connection issue - replaced router but kept ESSID

    - by Stevo
    I have a ubuntu server 12.04 which was connected to my wireless network with no problem I replaced the wireless router but kept the ESSID and password the same. All other devices on network have connected correctly. However the Ubuntu Server will not route correctly. It will connect to the wifi router, and get a dhcp served IP address, however it will not route anything. I cannot ping the router from the server. the contents of /etc/resolve.conf are updated with the information from the router, (the host name has been served) I know there is nothing wrong with the router or the server, or the wireless card etc. I'm assuming there's some cached setting that associates the old router with the ESSID and causing the issue. I've got a lot of other devices connected to the router, so don't want to change the name of the ESSID. How do I fix this? EDIT: outputs (abbreviated as I've got no cut and paste) netstat -rn: Kernel IP Routing table Dest Gate Gen Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0. UG 0 0 0 wlan0 192.168.0.0 0.0.0.0. 255.255.255.0 U 0 0 0 wlan0

    Read the article

  • RAID degraded on Ubuntu server

    - by reano
    We're having a very weird issue at work. Our Ubuntu server has 6 drives, set up with RAID1 as follows: /dev/md0, consisting of: /dev/sda1 /dev/sdb1 /dev/md1, consisting of: /dev/sda2 /dev/sdb2 /dev/md2, consisting of: /dev/sda3 /dev/sdb3 /dev/md3, consisting of: /dev/sdc1 /dev/sdd1 /dev/md4, consisting of: /dev/sde1 /dev/sdf1 As you can see, md0, md1 and md2 all use the same 2 drives (split into 3 partitions). I also have to note that this is done via ubuntu software raid, not hardware raid. Today, the /md0 RAID1 array shows as degraded - it is missing the /dev/sdb1 drive. But since /dev/sdb1 is only a partition (and /dev/sdb2 and /dev/sdb3 are working fine), it's obviously not the drive that's gone AWOL, it seems the partition itself is missing. How is that even possible? And what could we do to fix it? My output of cat /proc/mdstat: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid1 sda2[0] sdb2[1] 24006528 blocks super 1.2 [2/2] [UU] md2 : active raid1 sda3[0] sdb3[1] 1441268544 blocks super 1.2 [2/2] [UU] md0 : active raid1 sda1[0] 1464710976 blocks super 1.2 [2/1] [U_] md3 : active raid1 sdd1[1] sdc1[0] 2930133824 blocks super 1.2 [2/2] [UU] md4 : active raid1 sdf2[1] sde2[0] 2929939264 blocks super 1.2 [2/2] [UU] unused devices: <none> FYI: I tried the following: mdadm /dev/md0 --add /dev/sdb1 But got this error: mdadm: add new device failed for /dev/sdb1 as 2: Invalid argument Output of mdadm --detail /dev/md0 is: /dev/md0: Version : 1.2 Creation Time : Sat Dec 29 17:09:45 2012 Raid Level : raid1 Array Size : 1464710976 (1396.86 GiB 1499.86 GB) Used Dev Size : 1464710976 (1396.86 GiB 1499.86 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 15:55:07 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : lia:0 (local to host lia) UUID : eb302d19:ff70c7bf:401d63af:ed042d59 Events : 26216 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 0 0 1 removed

    Read the article

  • Rackspace Ubuntu 12.04 server stuck in initramfs after kernel upgrade

    - by Znarkus
    Can't boot after I did a aptitude full-upgrade and let it update menu.lst (did a diff first and it looked good). This is what I've done so far in the BusyBox shell: mkdir /tmp/xvda1 mount /dev/xvda1 /tmp/xvda1 chroot /dev/xvda1 nano /boot/grub/menu.lst This file looks like this: title Ubuntu 12.04.1 LTS, kernel 3.2.0-31-virtual root(hd0,0) kernel /boot/vmlinuz-3.2.0-31-virtual root=UUID=/dev/xvda1 ro quiet splash initrd /boot/initrd.img-3.2.0-31-virtual title Ubuntu 12.04.1 LTS, kernel 3.2.0-31-virtual (recovery mode) root(hd0,0) kernel /boot/vmlinuz-3.2.0-31-virtual root=UUID=/dev/xvda1 ro single initrd /boot/initrd.img-3.2.0-31-virtual titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-virtual root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-virtual root=UUID=/dev/xvda1 ro quiet splash initrd/boot/initrd.img-3.2.0-24-virtual titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-virtual (recovery mode) root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-virtual root=UUID=/dev/xvda1 ro single initrd/boot/initrd.img-3.2.0-24-virtual titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-generic root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-generic root=UUID=/dev/xvda1 ro quiet splash initrd/boot/initrd.img-3.2.0-24-generic titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-generic (recovery mode) root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-generic root=UUID=/dev/xvda1 ro single initrd/boot/initrd.img-3.2.0-24-generic titleChainload into GRUB 2 root(hd0,0) kernel/boot/grub/core.img titleUbuntu 12.04.1 LTS, memtest86+ root(hd0,0) kernel/boot/memtest86+.bin From what I remember, the upgrade added the UUID= string. Should I remove these? Or rather, how do I get my system back online again? Thanks. Update: Seems like I can't even edit the file. [ Error writing /boot/grub/menu.lst: Read-only file system ]

    Read the article

  • VirtualBox with Ubuntu Server guest can't ping outside

    - by Danidan
    Here's my situation: an Ubuntu 12.04 Host running VirtualBox; two guest VMs running Ubuntu Server 12.04 home network, so my Host pc has a wireless connection to the router of my ISP. My problem is in one of the virtual machines: it has 3 NICs, one in NAT mode and the others in Host Only mode. My purpose is to use eth0 (NAT) for Internet access and eth1, eth2 (Host Only) for management of internal virtual network (eth1 uses a VBoxNet with this IP 192.168.69.254). Whenever I try to $ping 8.8.8.8 I get Destination Host Unreachable. While if I $ping 192.168.69.10, that is the IP of the other VM, it works. I can't also ping my Host nor my router My /etc/network/interfaces file is: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 192.168.69.1 netmask 255.255.255.0 auto eth2 iface ifconfig $IFACE 0.0.0.0 up up ip link set $IFACE promisc on down ip link set $IFASE promisc off down ifconfig $IFACE down $route -n returns: Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 10.0.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.69.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Forgetting for now what eth2 needs to do and its setup, why I can't go outside the Host box? What can I do to help you helping me? :-)

    Read the article

  • Ubuntu 12.04 Very slow especially with Android Studio

    - by Nada
    I have an old laptop with the following specification: Memory: 485 MiB, Processor: Genuine intel CPU T2300 @ 1.66 GHz ×2, OS Type: 32 bit, Disk: 78.1 GB, I installed on it Ubuntu 12.04 LTS and I noticed that the overall system is very slow in responding. I tried to search about that in the internet and I found some articles talking about how to make Ubuntu 12.04 LTS run fast I applied all what they said including download LXDE desktop environment and then nothing different in the system response time. Then I need to develop some android applications so, I download Android Studio (Beta) 0.8.6. The problem became worse than before whenever I tried to open the Android Studio the screen is frozen for some minutes then it took time to download the projects and initialize the work space also, when I tried to move the cursor he is move very slowly. When I tried to run my first application on the AVD it took three hours and still not run yet. I delete the Android Studio and install it again several times, I was trying to solve the problem but still nothing change. Please if you have any suggestions that may help me make my laptop and Android Studio work faster I will appreciate it for you. Thank you in advance.

    Read the article

  • Getting dwl-g122 to work on ubuntu

    - by User1
    I have a USB WiFi adapter, D-Link dwl-g122. I'm running Ubuntu 10.4. My laptop has a built-in wireless card that is connecting fine to the router. I plug in the usb and it never really connects. Here are some details: iwconfig wlan1 IEEE 802.11bg ESSID:"\x0B\xE1..." Mode:Managed Frequency:2.457 GHz Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on lshw -c network: *-network:1 description: Wireless interface physical id: 3 logical name: wlan1 serial: 00:13:46:8b:xx:xx capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg dmesg [ 1096.814176] wlan1: direct probe to AP xxx (try 1) [ 1096.820960] wlan1: direct probe responded [ 1096.820969] wlan1: authenticate with AP xxx (try 1) [ 1096.823790] wlan1: authenticated [ 1096.823869] wlan1: associate with AP xxx (try 1) [ 1096.827667] wlan1: RX AssocResp from xxx (capab=0x411 status=0 aid=1) [ 1096.827674] wlan1: associated [ 1142.590912] wlan1: deauthenticating from xxx by local choice (reason=3) lsmod|rt2 rt2500usb 19643 0 rt2x00usb 11260 1 rt2500usb rt2x00lib 32133 2 rt2500usb,rt2x00usb mac80211 238896 3 ath5k,rt2x00usb,rt2x00lib cfg80211 148725 4 ath5k,ath,rt2x00lib,mac80211 led_class 3764 3 ath5k,rt2x00lib,sdhci It looks like the driver loads but it doesn't feel like connecting. The behavior is identical even if I blacklist the other wifi card (using an ath5k driver). It's almost like it is using the wrong password or something. Does anyone know what is happening? Is anyone using Ubuntu successful?

    Read the article

  • Ubuntu odd mouse and keyboard behavior when window gains inner focus

    - by Scott
    This morning on my Ubuntu 10.10 system when I open a window - for example, system-preferences-about me, if I click in to a field such as "work email", I can no longer close the window with the mouse! Clicking the X on the window will not work. Also, I loose the ability to click on anything else - clicking on the desktop, icons, menus, workspaces, etc. do not work. Even the effect when you hover over a folder on the desktop and that folder highlights - that stops until the window is closed. If I open this same screen but do not click in to a field, everything is fine - I can close the window with the X and everything else works fine. Same thing happens with several other windows I tried. Even calculator - I can open it, everything is fine until I click on a button in the calculator - then no ability to click on anything else. Have to Alt-F4 to close the window. The system is only about a week old from a fresh install (64 bit ubuntu - quad core amd machine). I uninstalled wine, turned off remote desktop/disabled in startup, also in startup disabled visual assistance, bluetooth, dropbox, klipper. Reboot, no difference. The only other thing non-standard I see in startup is nvidia. Using a logitec usb mouse, saitek usb keyboard. Was working fine yesterday. I can not think of anything I did / installed yesterday. I switched themse, then went to update manager and saw two x server / x org related updates and installed them, reboot and NOW IT IS FINE! However, then I re-enabled dropbox, klipper and remote desktop rebooted and the problem is back. Again I disabled and rebooted. Problem is still there!! So somehow I fixed it at least for a few minutes, but now it is back and I am out of ideas.

    Read the article

  • Primary/secondary ethernet interfaces in Ubuntu 9.10

    - by Josh
    I have an Ubuntu 9.10 machine with three ethernet interfaces, eth0, eth1 and eth2. eth2 is connected to a private network. eth0 and eth2 are connected to two different LANs. Either one will provide access to the internet. All three networks have DHCP servers. Using Ubuntu's the default settings (And Gnome), when I boot up all the interfaces are active and my system gets three IP addresses. However any attempt to access the internet results in connection timeouts and other weirdness. I suspect that traffic is going out on one NIC (like eth0) and coming back in on another (like eth1). I'm not sure what's going on. The only way I can access the internet at the moment is to bring two of the devices down with ifdown. How can I configure eth0 as my primary interface so all trafic goes out by default on that interface, while keeping the other two active? Also, I want to make sure Avahi broadcasts properly on all three IPs so that the computers on the LAN of eth1 can still connect to myHostname.local...

    Read the article

  • Ubuntu 12.04 can't boot after installing with software RAID 1

    - by Bill
    I've been trying to install Ubuntu with software RAID on my server and there is obviously something that I don't understand about the process. This is the guide that I followed: https://help.ubuntu.com/11.04/serverguide/advanced-installation.html I have two identical 1 TB disks in my server. I went through the initial install process and manually set up my partitions. On each disk I set up: (1) 100 MB partition for EFI boot (I didn't originally have this but added it based on a forum post I found after my original install failed to boot, I ended up with EFIboot since that was what the 'guided partitioning' decided to do) (1) 970 MB partition for / (1) 30 MB partition for swap I then created new RAID 1 disks combining the two partitions, one from each disk, such that each partition is mirrored. I then configured their usage as stated above. After saving the configuration I said yes to boot in a degraded state. The rest of the setup went normally, no errors of any kind. I saw GRUB being installed and again no errors. However, after rebooting the server I get the dreaded 'Insert boot media' and nothing happens. I loaded up the recovery disk and the mdadm configuration looks correct. md0 is my EFIBoot partition md1 is my \ partition using ext4 md2 is my swap partition Running file -s /dev/md0 doesn't indicate that GRUB is there and so I attempted to reinstall GRUB using the recovery disk. I selected the md0 disk and it appeared to install just fine. Running file -s /dev/md1 shows the error needs journal recovery, I'm not sure if that's related or not or how to fix that. Rebooting gives me the same problem, no boot media found. I've searched around the internet but can't figure out what to do next or more importantly how to troubleshoot what exactly is going wrong. Thanks!

    Read the article

  • Ubuntu server 10.04 disconnects after short periods of inactivity on my site

    - by user57019
    I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

    Read the article

  • Xamp on ubuntu serves php source for root url only

    - by mazaryk
    Hey, Okay, so installed xamp on my ubuntu machine, started it up and everything worked. Apache ran my php app just fine (including requests to the root url "/"). However, after the first reboot since installing, when I request "http://localhost/" apache serves up the index php page as a phtml source file. All other urls (like "http://localhost/login") work as expected. Backgound: The only modification I made to xamp was to setup a vhost for my app. The app uses an .htaccess file where I define some rewrite rules (the app is an MVC framework and all urls are rewritten to a single entry point php file). I'm using Xamp because I need php = 5.3.0. I know apache will serve up the source of a php file when it doesn't know to process php files. But the config does indeed have "AddType application/x-httpd-php .php" and as I said, the app works for all urls except the root "/" (and only since I've rebooted). The .htaccess file does contain a DirectoryIndex directive. xamp 1.3.7a Ubuntu 9.10 Any ideas?

    Read the article

  • ubuntu 12.04 kvm virtual server network setup, can't get the machine to be connectable

    - by xyious
    I have worked on my Ubuntu Server host for weeks now and I just can not manage to get the virtual machines into the network.... here's what I need to do: I need to be able to create virtual machines that have IP addresses that can be reached from the outside (192.168 network). I need to be able to connect to the virtual machines through ssh, ftp, http and preferably https, anything else doesn't matter that much. So far everything seems simple enough and I have a lot of leeway in terms of IP address range and server/client configuration. I have the option of taking part of a /24 net as most IPs aren't used, and if it's absolutely necessary I have the option of creating a new /24 subnet. Also have the option of reformatting and reinstalling OS on the host and recreating the virtual machines as nothing has been done other than trying to get virtual machines to work. I would prefer if the virtual machines were just part of the normal network which would be 192.168.5.0/24. The host machine has 2 network cards so I don't even necessarily need the Host to be connectable in the same /24 network. I have tried (I think) just about everything from about 5 different tutorials on bridging (giving br0 the same IP that eth0 used to have (Host is able to connect to VM and vice versa, VM doesn't have outside network access), having eth0 set up like it always was and having br0 have a different IP (same as above), NAT with port forwarding (which I would have preferred not to use but will if it works), turning off one of the hosts network cards and just using one of them, different subnets.... etc. I do know my way around iptables fairly well.... Host is 64bit Ubuntu Server 12.04, using libvirt/kvm. edits: Local network is 192.168.5.0/24, host has static ip 192.168.5.254, GW .5.1 which is also nameserver. We have a second Local network at 192.168.10.0/24 with .10.1 GW, but both hosts and VMs were supposed to go into the .5 subnet. The .10 subnet isn't required, but it wouldn't be horrible if the Host were only accessible in the .10 subnet.

    Read the article

  • Ubuntu server 10.04 disconnects after short periods of inactivity on my site

    - by Melot
    Hi! I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

    Read the article

  • Ubuntu 9.10 won't reboot after replacing a failed drive

    - by user149041
    Hello Serverfault community. I hope someone can shed light on a peculiar problem I am having with an Ubuntu 9.10 server install. I am not a Linux expert but have the responsibility of fixing the box if something goes wrong. DOH! I have Ubuntu 9.10 server installed on on a desktop platform: Compaq Presario SR5027CL. There are two 1TB SATA drives configured in a RAID 1 array; I use the box as an email backup server for a small group of users. Last week one of the drives failed and was replaced with a new drive of the same type. The problem I have been having is getting the box to reboot after a restart or a shutdown halt. The OS and the RAID 1 array are on the same drives that make up the RAID 1 array. The replacement drive (sda) was added to the box and the partitions were created to match the existing good drive (sdb). The array is made up of sda1 and sdb1. I found an interesting point while checking the BIOS settings: there is a "HDD Boot Group Priority" section, and the new drive was selected as the "1. 3rd master"; the server wouldn't boot configured like that, but when I set the old drive to be "1. 4th master", the box will reboot. I'm checking some more things, but I would certainly appreciate any useful information. Thanks in advance.

    Read the article

  • EF4 performance tips and tricks

    - by Will
    I've gotten to that point in one of my projects, and haven't found much information out there. So if you've got some pointers for improving performance in the new Entity Framework 4, please let us know!

    Read the article

  • WiX tricks and tips

    - by Si
    We've been using WiX 3 for a while now, and despite the usual gripes about ease of use, it's going reasonably well. What I'm looking for is useful advice regarding: Setting up a WiX project (layout, references, file patterns) Integrating WiX into solutions, and build/release processes Configuring installers for new installations and upgrades Also interested in any good WiX hacks you'd like to share, thanks!

    Read the article

  • TextMate tips for Rails Development

    - by Ganesh Shankar
    Working on Rails code for a bit has started me on the spiral into obsessively customising my dev environment (I say obsessive as at the last Rails meetup I went to there was some guy who was raving about shaving milliseconds off each line of code and therefore upto half an hour a day... I hope I don't become that guy...) I spend most of my time in TextMate so it seemed like a great place to start the optimising... So far I've added a few TextMate bundles like Git Bundle, Project Plus and the theme from Railscasts. I've noticed some of the other TextMate users I've come into contact with using heaps of nifty keyboard shortcuts and other plugins to help make their dev environment more friendly. Looking around the net, I was a bit overwhelmed by the amount of shortcuts and plugins available... So I was hoping to hear from other Rails developers out there: What are some good keyboard shortcuts and plugins that I should be aware of for TextMate with specific reference to Rails Development? I've read this question on SO: http://stackoverflow.com/questions/99807/what-are-some-useful-textmate-shortcuts but I was wondering if there was something a bit more specific to Rails development.

    Read the article

  • learning to type - tips for programmers?

    - by OrbMan
    After hunting and pecking for about 35 years, I have decided to learn to type. I am learning QWERTY and have learned about 2/3 of the letters so far. While learning, I have noticed how asymmeterical the keyboard is, which really bothers me. (I will probably switch to a symmetrical keyboard eventually, but for now am trying to do everything as standard and "correct" as possible.) Although I am not there yet in my lessons, it seems that many of the keys I am going to use as a C# web developer are supposed to be typed by the pinky of my right hand. Are there any typing patterns you have developed that are more ergonomic (or faster) when typing large volumes of code rife with braces, colons, semi-colons and quotes? Or, should I just accept the fact that every other key is going to be hit with my right pinky? It is not that speed is such a huge concern, as much as that it seems so inefficient to rely on one finger so much... As an example, some of the conventions I use as a hunt and pecker, like typing open and close braces right away with my index and middle finger, and then hitting the left arrow key to fill in the inner content, don't seem to work as well with just a pinky. What are some typing patterns using a standard QWERTY keyboard that work really well for you as a programmer?

    Read the article

  • How do you use kate? Tips/Tricks/Workflow

    - by Roman A. Taycher
    We all seen a bunch of these? Mostly for IDE's but also for vim and emacs. Kate is (only) a text editor (an awesome one) but it has a ton of options plus a number of plugins, so its hard to know all of it well. How do use the Kate text editor? Please share your workflow and help me and others learn some of the cool tricks you use. I'll start I use the built in terminal a lot opening files quickly, and using it as an enhanced haskell repl with ghci (since ghci doesn't allow you all to just put in all kinds of haskell code). Also use split views to quickly compare files (especially different versions of the same file). Also the auto-complete maybe simple(more use for saving typing time then remembering functions) but it works really well for that. Also if You highlight something and hit a start [/{/( it puts it in between brackets rather then replacing it with a bracket(why the hell do a lot of IDEs not have this feature).

    Read the article

  • Taming the malloc/free beast -- tips & tricks

    - by roufamatic
    I've been using C on some projects for a master's degree but have never built production software with it. (.NET & Javascript are my bread and butter.) Obviously, the need to free() memory that you malloc() is critical in C. This is fine, well and good if you can do both in one routine. But as programs grow, and structs deepen, keeping track of what's been malloc'd where and what's appropriate to free gets harder and harder. I've looked around on the interwebs and only found a few generic recommendations for this. What I suspect is that some of you long-time C coders have come up with your own patterns and practices to simplify this process and keep the evil in front of you. So: how do you recommend structuring your C programs to keep dynamic allocations from becoming memory leaks?

    Read the article

  • Ubuntu error: no candidate ver

    - by codedude
    Ok...so for some reason by Ubuntu 10.04 partition won't startup anymore. I'm not exactly sure what I did. I have the feeling that I accidentally removed some important packages. However, when I startup in Recovery Mode and select "dpkg: repair broken packages" I get this output: rm: cannot remove /var/lib/apt/lists/partial/*': No such file or directory rm: cannot remove/var/cache/apt/archives/partial/*': No such file or directory Reading Cache Reading Package lists: Done Reading State Information: Done Reading State Information: Done Reading State Information: Done No candidate ver: libisc44 No candidate ver: readahead No candidate ver: libdirectfb-1.0-0 No candidate ver: upstart-logd No candidate ver: libparted1.8-10 No candidate ver: libflickrnet2.1.5-cil No candidate ver: libicu38 No candidate ver: fast-user-switch-applet No candidate ver: linux-restricted-modules-2.6.28-11-generic No candidate ver: libnm-util0 No candidate ver: libwebkit-1.0-1 No candidate ver: libopal3.6.1 No candidate ver: libbind9-40 No candidate ver: linux-restricted-modules-common No candidate ver: upstart-compat-sysv No candidate ver: linux-restricted-modules-2.6.28-13-generic No candidate ver: chromium-browser No candidate ver: libisc45 No candidate ver: belocs-locales-bin No candidate ver: libxcb-xlib0 No candidate ver: libpoppler4 No candidate ver: libpulsecore9 No candidate ver: libpulsecore5 No candidate ver: linux-image-2.6.28-15-generic No candidate ver: libntfs-3g49 No candidate ver: libisccfg40 No candidate ver: libavahi-core5 No candidate ver: linux-restricted-modules-2.6.27-7-generic No candidate ver: libparted1.8-9 No candidate ver: libmagickwand1 No candidate ver: libwvstreams4.4-base No candidate ver: linux-image-2.6.28-14-generic No candidate ver: libraw1394-8 No candidate ver: libdatrie0 No candidate ver: libboost-program-options1.35.0 No candidate ver: libgnomekbdui3 No candidate ver: libsgutils1 No candidate ver: libass1 No candidate ver: linux-restricted-modules-2.6.28-15-generic No candidate ver: libindicate1 No candidate ver: libgnomekbd3 No candidate ver: system-services No candidate ver: linux-image-2.6.28-13-generic No candidate ver: libmagick10 No candidate ver: libcolamd-3.2.0 No candidate ver: desktop-effects-kde No candidate ver: picasa No candidate ver: libgnome-desktop-2-7 No candidate ver: libntfs-3g28 No candidate ver: libxklavier12 No candidate ver: libgpod3 No candidate ver: libmagickcore1 No candidate ver: libffado0 No candidate ver: libzephyr3 No candidate ver: libuniconf4.4 No candidate ver: libmbca0 No candidate ver: liblwres40 No candidate ver: hotkey-setup No candidate ver: libkrb53 No candidate ver: ttf-bitstream-vera No candidate ver: libee12-2 No candidate ver: libopal-2.2 No candidate ver: songbird No candidate ver: plib1.8.4c2 No candidate ver: linux-image-2.6.27-7-generic No candidate ver: libpoppler3 No candidate ver: google-chrome-unstable No candidate ver: linux-image-2.6.28-11-generic No candidate ver: linux-restricted-modules-2.6.28-14-generic No candidate ver: simgear1.0.0 No candidate ver: libpoppler-glib3 No candidate ver: mono-common No candidate ver: libx264-65 No candidate ver: libwvstreams4.4-extras No candidate ver: libdns43 No candidate ver: libnm-glib0 No candidate ver: libpt2.6.1 No candidate ver: libisccc40 No candidate ver: libdns45 No candidate ver: libisc44 No candidate ver: readahead No candidate ver: libdirectfb-1.0-0 No candidate ver: upstart-logd No candidate ver: libparted1.8-10 No candidate ver: libflickrnet2.1.5-cil No candidate ver: libicu38 No candidate ver: fast-user-switch-applet No candidate ver: linux-restricted-modules-2.6.28-11-generic No candidate ver: libnm-util0 No candidate ver: libwebkit-1.0-1 No candidate ver: libopal3.6.1 No candidate ver: libbind9-40 No candidate ver: linux-restricted-modules-common No candidate ver: upstart-compat-sysv No candidate ver: linux-restricted-modules-2.6.28-13-generic No candidate ver: chromium-browser No candidate ver: libisc45 No candidate ver: belocs-locales-bin No candidate ver: libxcb-xlib0 No candidate ver: libpoppler4 No candidate ver: libpulsecore9 No candidate ver: lipulsecore5 No candidate ver: linux-image-2.6.28-15-generic No candidate ver: libntfs-3g49 No candidate ver: libisccfg40 No candidate ver: libavahi-core5 No candidate ver: linux-restricted-modules-2.6.27-7-generic No candidate ver: libparted1.8-9 No candidate ver: libmagickwand1 No candidate ver: linux-image-2.6.28-14-generic No candidate ver: libraw1394-8 No candidate ver: libdatrie0 No candidate ver: libboost-program-options1.35.0 No candidate ver: libgnomekbdui3 No candidate ver: libsgutils1 No candidate ver: libass1 No candidate ver: linux-restricted-modules-2.6.28-15-generic No candidate ver: libindicate1 No candidate ver: libgnomekbd3 No candidate ver: system-services No candidate ver: linux-image-2.6.28-13-generic No candidate ver: libmagick10 No candidate ver: libcolamd-3.2.0 No candidate ver: desktop-effects-kde No candidate ver: picasa No candidate ver: libgnome-desktop-2-7 No candidate ver: libntfs-3g28 No candidate ver: libxklavier12 No candidate ver: libgpod3 No candidate ver: libmagickcore1 No candidate ver: libffado0 No candidate ver: libzephyr3 No candidate ver: libuniconf4.4 No candidate ver: libmbca0 No candidate ver: liblwres40 No candidate ver: hotkey-setup No candidate ver: libkrb53 No candidate ver: ttf-bitstream-vera No candidate ver: libeel2-2 No candidate ver: libopal-2.2 No candidate ver: songbird No candidate ver: plib1.8.4c2 No candidate ver: linux-image-2.6.27-7-generic No candidate ver: libpoppler3 No candidate ver: google-chrome-unstable No candidate ver: linux-image-2.6.28-11-generic No candidate ver: linux-restricted-modules-2.6.28-14-generic No candidate ver: simgear1.0.0 No candidate ver: libpoppler-glib3 No candidate ver: mono-common No candidate ver: libx264-65 No candidate ver: libwvstreams4.4-extras No candidate ver: libdns43 No candidate ver: libnm-glib0 No candidate ver: libpt2.6.1 No candidate ver: libisccc40 No candidate ver: libdns45 Your system is up-to-date There are no upgrades available for your system. The upgrade will now be canceled. Do you want to start the upgrdae? Continue [yN] Details [d] (Sorry that is so long...) I'm assuming I'm missing each of those packages. However, when I try to install them, for example: sudo apt-get install libisc44 I get some response that this package is missing and/or it may be part of another package. I'm not exactly sure what I should do. I don't want to reinstall ubuntu, since I have it dual booted with Windows Vista and I don't want to risk anything on the Windows partition. What are your thoughts? EDIT: I've posted this on Ubuntu Forums and nobody ever responded so...yah

    Read the article

  • Ubuntu error: no candidate ver

    - by codedude
    Ok...so for some reason by Ubuntu 10.04 partition won't startup anymore. I'm not exactly sure what I did. I have the feeling that I accidentally removed some important packages. However, when I startup in Recovery Mode and select "dpkg: repair broken packages" I get this output: rm: cannot remove /var/lib/apt/lists/partial/*': No such file or directory rm: cannot remove/var/cache/apt/archives/partial/*': No such file or directory Reading Cache Reading Package lists: Done Reading State Information: Done Reading State Information: Done Reading State Information: Done No candidate ver: libisc44 No candidate ver: readahead No candidate ver: libdirectfb-1.0-0 No candidate ver: upstart-logd No candidate ver: libparted1.8-10 No candidate ver: libflickrnet2.1.5-cil No candidate ver: libicu38 No candidate ver: fast-user-switch-applet No candidate ver: linux-restricted-modules-2.6.28-11-generic No candidate ver: libnm-util0 No candidate ver: libwebkit-1.0-1 No candidate ver: libopal3.6.1 No candidate ver: libbind9-40 No candidate ver: linux-restricted-modules-common No candidate ver: upstart-compat-sysv No candidate ver: linux-restricted-modules-2.6.28-13-generic No candidate ver: chromium-browser No candidate ver: libisc45 No candidate ver: belocs-locales-bin No candidate ver: libxcb-xlib0 No candidate ver: libpoppler4 No candidate ver: libpulsecore9 No candidate ver: libpulsecore5 No candidate ver: linux-image-2.6.28-15-generic No candidate ver: libntfs-3g49 No candidate ver: libisccfg40 No candidate ver: libavahi-core5 No candidate ver: linux-restricted-modules-2.6.27-7-generic No candidate ver: libparted1.8-9 No candidate ver: libmagickwand1 No candidate ver: libwvstreams4.4-base No candidate ver: linux-image-2.6.28-14-generic No candidate ver: libraw1394-8 No candidate ver: libdatrie0 No candidate ver: libboost-program-options1.35.0 No candidate ver: libgnomekbdui3 No candidate ver: libsgutils1 No candidate ver: libass1 No candidate ver: linux-restricted-modules-2.6.28-15-generic No candidate ver: libindicate1 No candidate ver: libgnomekbd3 No candidate ver: system-services No candidate ver: linux-image-2.6.28-13-generic No candidate ver: libmagick10 No candidate ver: libcolamd-3.2.0 No candidate ver: desktop-effects-kde No candidate ver: picasa No candidate ver: libgnome-desktop-2-7 No candidate ver: libntfs-3g28 No candidate ver: libxklavier12 No candidate ver: libgpod3 No candidate ver: libmagickcore1 No candidate ver: libffado0 No candidate ver: libzephyr3 No candidate ver: libuniconf4.4 No candidate ver: libmbca0 No candidate ver: liblwres40 No candidate ver: hotkey-setup No candidate ver: libkrb53 No candidate ver: ttf-bitstream-vera No candidate ver: libee12-2 No candidate ver: libopal-2.2 No candidate ver: songbird No candidate ver: plib1.8.4c2 No candidate ver: linux-image-2.6.27-7-generic No candidate ver: libpoppler3 No candidate ver: google-chrome-unstable No candidate ver: linux-image-2.6.28-11-generic No candidate ver: linux-restricted-modules-2.6.28-14-generic No candidate ver: simgear1.0.0 No candidate ver: libpoppler-glib3 No candidate ver: mono-common No candidate ver: libx264-65 No candidate ver: libwvstreams4.4-extras No candidate ver: libdns43 No candidate ver: libnm-glib0 No candidate ver: libpt2.6.1 No candidate ver: libisccc40 No candidate ver: libdns45 No candidate ver: libisc44 No candidate ver: readahead No candidate ver: libdirectfb-1.0-0 No candidate ver: upstart-logd No candidate ver: libparted1.8-10 No candidate ver: libflickrnet2.1.5-cil No candidate ver: libicu38 No candidate ver: fast-user-switch-applet No candidate ver: linux-restricted-modules-2.6.28-11-generic No candidate ver: libnm-util0 No candidate ver: libwebkit-1.0-1 No candidate ver: libopal3.6.1 No candidate ver: libbind9-40 No candidate ver: linux-restricted-modules-common No candidate ver: upstart-compat-sysv No candidate ver: linux-restricted-modules-2.6.28-13-generic No candidate ver: chromium-browser No candidate ver: libisc45 No candidate ver: belocs-locales-bin No candidate ver: libxcb-xlib0 No candidate ver: libpoppler4 No candidate ver: libpulsecore9 No candidate ver: lipulsecore5 No candidate ver: linux-image-2.6.28-15-generic No candidate ver: libntfs-3g49 No candidate ver: libisccfg40 No candidate ver: libavahi-core5 No candidate ver: linux-restricted-modules-2.6.27-7-generic No candidate ver: libparted1.8-9 No candidate ver: libmagickwand1 No candidate ver: linux-image-2.6.28-14-generic No candidate ver: libraw1394-8 No candidate ver: libdatrie0 No candidate ver: libboost-program-options1.35.0 No candidate ver: libgnomekbdui3 No candidate ver: libsgutils1 No candidate ver: libass1 No candidate ver: linux-restricted-modules-2.6.28-15-generic No candidate ver: libindicate1 No candidate ver: libgnomekbd3 No candidate ver: system-services No candidate ver: linux-image-2.6.28-13-generic No candidate ver: libmagick10 No candidate ver: libcolamd-3.2.0 No candidate ver: desktop-effects-kde No candidate ver: picasa No candidate ver: libgnome-desktop-2-7 No candidate ver: libntfs-3g28 No candidate ver: libxklavier12 No candidate ver: libgpod3 No candidate ver: libmagickcore1 No candidate ver: libffado0 No candidate ver: libzephyr3 No candidate ver: libuniconf4.4 No candidate ver: libmbca0 No candidate ver: liblwres40 No candidate ver: hotkey-setup No candidate ver: libkrb53 No candidate ver: ttf-bitstream-vera No candidate ver: libeel2-2 No candidate ver: libopal-2.2 No candidate ver: songbird No candidate ver: plib1.8.4c2 No candidate ver: linux-image-2.6.27-7-generic No candidate ver: libpoppler3 No candidate ver: google-chrome-unstable No candidate ver: linux-image-2.6.28-11-generic No candidate ver: linux-restricted-modules-2.6.28-14-generic No candidate ver: simgear1.0.0 No candidate ver: libpoppler-glib3 No candidate ver: mono-common No candidate ver: libx264-65 No candidate ver: libwvstreams4.4-extras No candidate ver: libdns43 No candidate ver: libnm-glib0 No candidate ver: libpt2.6.1 No candidate ver: libisccc40 No candidate ver: libdns45 Your system is up-to-date There are no upgrades available for your system. The upgrade will now be canceled. Do you want to start the upgrdae? Continue [yN] Details [d] (Sorry that is so long...) I'm assuming I'm missing each of those packages. However, when I try to install them, for example: sudo apt-get install libisc44 I get some response that this package is missing and/or it may be part of another package. I'm not exactly sure what I should do. I don't want to reinstall ubuntu, since I have it dual booted with Windows Vista and I don't want to risk anything on the Windows partition. What are your thoughts? EDIT: I've posted this on Ubuntu Forums and nobody ever responded so...yah

    Read the article

  • Xcode Tips for Eclipse users?

    - by willcodejavaforfood
    Hi, I've been slowly working my way through the examples in Beginning iPhone Development and there are a few things that I have not been able to figure out, but I'm sure you guys can help me with it. In Eclipse there is a Source-Generate Getters/Setters, can you do something similar to synthesize properties in Xcode I also cannot seem to find a Refactor menu I'm also struggling to find the equivalent to Source-Override/Implement Methods --Edit-- I failed to describe my problem it seems. I do know that synthesizing properties will generate getters/setters for me, but I am looking for a way to generate the @property/@synthesize code, by selecting the variables. Short list to start with, but I will probably have more as my confusion grows in might. :)

    Read the article

  • .Net Compact Framework Tips, Tricks, and Gotchas

    - by Mat Nadrofsky
    Hey everyone, We work extensively in the .Net Compact Framework and Windows Mobile. I've seen plenty of questions come up regarding specifics to development of ASP.Net apps or other .Net based desktop apps but nothing CF specific. Anyone else a mobile developer out there that can share some things to start doing, stop doing, and avoid doing when developing in the Compact Framework?

    Read the article

< Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >