Search Results

Search found 25071 results on 1003 pages for 'information overload'.

Page 784/1003 | < Previous Page | 780 781 782 783 784 785 786 787 788 789 790 791  | Next Page >

  • System Issues and Major Malfuctions after Failed hibernation Exit

    - by Sarah Seguin
    I have a HP G71-340US that went into hibernation mode for a while and when I tried coming out of it, I got an error message: You're computer cannot come out if hibernation . Status: 0xc000009a Info: A fatal error occurred processing the restoration data. File: \hiberfil.sys Any information that was not saved before the computer went into hybernation will be lost enter=continue So I hit continue and it ran soooo super slow it. It was seriously crawling. Finally I gave up and turned it off manually (IE press and hold the button). It's been a week or two since then and EVERY SINGLE TIME I have tried to to do ANYTHING it takes forever. When I say forever, I literally mean takes 5-7 minutes to load the internet, then the page itself, then to click a link, so on so forth. Eventually everything just goes not responding and I have to give up (4-6 HOURS later). I also cannot access my thumb/jump drives once I've managed to load windows. I was going to try runing malware bytes incase of a virus, but it's windows explorer developes errors and goes not responding on me. Currently I'm running scan disk or check disk and like every file is coming back unreadable. I let it run the last 2 hours straight in chkdesk and I'm only at 6 percent with around 500+ errors and still going. Yes, I've taken logs of the errors via cell phone camera and patience. A week or two prior to this happening I had to change our the hard drive due to blunt force trama next to the mouse. OH! Running on Windows 7: ) And I've tried loading the computer in safe mode and it makes absolutely no difference. Any and all help would be appreciated. I really don't know what to do from here and I'm kind of freaking out. I've googled different part of the error and things that I've done/seen and there are so many different answers/topics that I thought it best to just post the questions.

    Read the article

  • How To Completely Move Users/Program Files/Program Files (x86)/ProgramData (Folders) To Another Partition(s) On Windows 8?

    - by Enigma83
    I am attempting to move folders Users Program Files Program Files (x86), ProgramData (at the root of the C drive) to at least 2 other partitions, preferably on a fresh install. I have read that there are methods for doing this post-install, but it seems like it would be a bit more tedious to do things that way. I want to move the 2 Program Files folders to another partition on the same HDD, and Users/ProgramData will go to yet another partition on same HDD. I have done a bit of research on this, read up on some things that involved booting into Audit Mode, using the RoboCopy command to copy folders via booting into my Windows 8 USB drive, creating NTFS junctions/symbolic links, Registry edits, as well as accomplishing this automatically by creating an auto-attend file which Windows Setup processes automatically before the user is ever booted in for the 1st time. I tried this morning and now have a basic installation in which programs like Internet Explorer fail to open, certain files can't be found/opened (even if I click on them directly), an example is Regedit. Also, I can't run the Command/DOS (CMD) prompt as Administrator (or otherwise, as any other user), can't activate the real Administrator account or open any of the Administrative Tools (despite having added them to my Start Screen). So far I have only tried RoboCopy-ing Program Files and Program Files (x86) so far, creating junction points for them, and editing the Registry in the relevant locations. This is what I'm left with now. I also found the following blog article which describes how to do this for Windows 7 So, where should I go from here and where can I find more information? And how can this be done without disabling the Metro apps, which I've read will stop working if you move ProgramData. Once I have everything moved, where do I install programs to? Do I tell them to install to C:\Program Files\Program Files (x86) or to the junctioned/symbolic-linked partition/drive? I plan to test in VMware virtual machines from here on until things are working correctly, while using a baseline default install for daily tasks.

    Read the article

  • Referer is passed from HTTPS to HTTP in some cases... How?

    - by ravisorg
    In theory browsers do not pass on referer information from HTTPS to HTTP sites. And in my experience this has always been true. But I just found an exception, and I want to understand why it works so I can use it as well. Search for "what is my referer" on https://www.google.ca/ eg: https://www.google.ca/search?q=what+is+my+referer There are a few sites that will show referer. They all seem to "work" when they shouldn't. For example, click the www.whatismyreferer.com one. I get: Your referer: https://www.google.ca/ Note that sometimes, rarely, I get "no referer" as the result. Go back and click the link again and it'll "work" the next time. This should not happen. www.whatismyreferer.com is a non-HTTPS site. The referer header should not be being passed, but it is. What's going on here, and how can I do the same from my HTTPS site to the HTTP sites I'm linking to?

    Read the article

  • puppet execution of a python script where os.system(...) command is not working

    - by philippe
    I am trying to manage Unix users with puppet. Puppet provides enough tools to create accounts and provide authorized_keys files for instance, but no to set up user password, and it tell to the user. What I have done is a python script which generate a random password and send it to the user by email. The problem is, it is not possible to launch passwd Unix command with python, I have then written a bash script with the command: echo -ne "$password\n$password\n" | passwd $user passwd -e $user Launched manually, the script works fine and the created user has its password sent by email. But when puppet launches it, only the python script gets executed, as if the os.system('/bin/bash my_bash_script') is ignored. No error is displayed. And the user gets its password, but the passwd commands are not launched. Is there any limitation with puppet preventing to perform what I described? Or, how can I otherwise change the user account, its expiration, and send password by email? I can provide more information, but right now, I don't know which are accurate. Many thanks!

    Read the article

  • Linux: Three default gateways?

    - by Daniel
    My server has three default gateways, how can that be? Shouldn't there be one default gw? I have three NICs, each attached to a separate subnet: server1:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.5.0.0 * 255.255.255.224 U 0 0 0 eth3 localnet * 255.255.255.224 U 0 0 0 eth0 192.168.8.0 * 255.255.255.192 U 0 0 0 eth1 default 10.5.0.1 0.0.0.0 UG 0 0 0 eth3 default 192.168.8.1 0.0.0.0 UG 0 0 0 eth1 default 10.1.0.1 0.0.0.0 UG 0 0 0 eth0 Sometimes, I can't ping a host on the Internet, sometimes I can. What I want is traffic to the Internet (0.0.0.0) routed through a specific NIC. Can I just add a route for 0.0.0.0 and default gw to one of the eth0-3 interfaces? Will it break my connection? I'm using Debian, here is my /etc/network/interfaces: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 10.1.0.4 netmask 255.255.255.224 network 10.1.0.0 broadcast 10.1.0.31 gateway 10.1.0.1 allow-hotplug eth1 iface eth1 inet static address 192.168.8.4 netmask 255.255.255.192 network 192.168.8.0 broadcast 192.168.8.63 gateway 192.168.8.1 allow-hotplug eth3 iface eth3 inet static address 10.5.0.4 netmask 255.255.255.224 network 10.5.0.0 broadcast 10.5.0.31 gateway 10.5.0.1

    Read the article

  • VPS with multiple domains, can EXIM send mail from a different domain?

    - by Mike L.
    I building a site for a client on a VPS running CentOS 5.5 with cPanel WMH 11.28.60. The original domain is XXXXXinvestmenttrust.com. He has about a dozen domains on this server. The site I am building will have confirmation emails as well as provide users to anonymize their email address (like craigslist) I set up email piping to forward emails, but they are all being trapped in the spam folder. A close look at the headers, the emails appear to be comming from [email protected] rather than the actual domain. The IP has a rating of Neutral on www.senderbase.com. I believe it is the conflicting information in the header (the fields set by me, specify the actual domain where the headers put in place by EXIM specify to name of the server) Somewhere I read about SPF & MX entries can fix this, but I have been unable to figure out how. Also, All of the domains use the same IP, and the other websites do not send emails. So I could possibly make the domain in question, the primary (where all emails are sent from that domain by default) Is that possible?

    Read the article

  • Nvidia 9800GT randomly prevents computer from booting

    - by Blender
    My computer has been running Windows and Linux perfectly fine with my 9800GT for the past year or so, but today it refused to boot. When I press the power button, this is what happens: Power button flashes once. Fans whir. Graphics card makes clicking noise. Computer reboots. Go back to 1. The cycle just keeps going, and I have to yank the cord to make the computer stop. After about 30 attempts at booting it, the computer powers on and everything works. I'm pretty sure that the graphics card isn't malfunctioning, as I've been GPU computing on it for a while now without any hiccups. But the strange thing is, the computer boots perfectly fine in only 5 boots if I remove the card. The computer is a HP Pavilion a6028x Desktop PC: Processor: AMD Athlon 64 X2 (W) 4600+ 2.4 GHz (AM2 socket) Motherboard: ECS MCP61PM-HM (Nettle 1) RAM: 3GB DDR2 (two different brands) More specs here Does anybody know what could be the problem? Any help or information would be greatly appreciated!

    Read the article

  • mysqld - master to slave replication using rsync innodb, sequence number issues

    - by Luis
    I've read several of the related topics posted here, but I have not been able to avoid this innodb error. The steps I've taken to replicate data from a Slackware server - 5.5.27-log (S) to a FreeBSD slave - 5.5.21-log (F) were these: (S) flush tables with read lock; (S) in another terminal show master status; (S) stop mysqld via command line in third terminal; (F) while both servers are stopped, rsync mysql datadir from (S), excluding master.info, mysql-bin and relay-* files; (F) start mysqld (skip-slave) 121018 12:03:29 InnoDB: Error: page 7 log sequence number 456388912904 InnoDB: is in the future! Current system log sequence number 453905468629. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: for more information. This kind of error happens for a lot of tables. I know I can use dump, but the database is large, ca. 70GB and the systems are slow (old), so would like to get this replication to work with data transfer. What should I try to solve this issue?

    Read the article

  • Oracle 11g Data Guard over a WAN

    - by Dave LeJeune
    Hi - We are in process of looking at using Oracle's Data Guard to replicate our 11g instance from a colo facility in Washington DC to Chicago. To give some basics we have approximately 25TB of storage and a healthy transaction rate in the 1-2K/sec range. Also, because we are processing data in real-time we have a 24x7x365 requirement for processing data. We don't have any respites as far as volume except for system upgrades (once every few months) where we take the system offline but then course experience a spike in transactions when we bring the system back on-line. Ideally we would want the second instance in the DG configuration semi-online in a read-only fashion for reports/etc. We evaluated DG in 10g and were not overly impressed and research seemed to show that earlier versions had issues with replication over a WAN but I have heard good things about modifications the product has gone through w/ 11g. Can anyone confirm an instance of this size and transaction rate being replicated over a WAN and if so what is the general latency? An information or experiences with a DG implementation that is of this size and scope would really be helpful (or larger - I also realize we are still relatively small compared to many others out there). Many thanks in advance.

    Read the article

  • Unusual HEAD requests to nonsense URLs from Chrome

    - by JeremyDWill
    I have noticed unusual traffic coming from my workstation the last couple of days. I am seeing HEAD requests sent to random character URLs, usually three or four within a second, and they appear to be coming from my Chrome browser. The requests repeat only three or four times a day, but I have not identified a particular pattern. The URL characters are different for each request. Here is an example of the request as recorded by Fiddler 2: HEAD http://xqwvykjfei/ HTTP/1.1 Host: xqwvykjfei Proxy-Connection: keep-alive Content-Length: 0 User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/534.13 (KHTML, like Gecko) Chrome/9.0.597.98 Safari/534.13 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 The response to this request is as follows: HTTP/1.1 502 Fiddler - DNS Lookup Failed Content-Type: text/html Connection: close Timestamp: 08:15:45.283 Fiddler: DNS Lookup for xqwvykjfei failed. No such host is known I have been unable to find any information through Google searches related to this issue. I do not remember seeing this kind of traffic before late last week, but it may be that I just missed it before. The one modification I made to my system last week that was unusual was adding the Delicious add-in/extension to both IE and Chrome. I have since removed both of these, but am still seeing the traffic. I have run virus scan (Trend Micro) and HiJackThis looking for malicious code, but I have not found any. I would appreciate any help tracking down the source of the requests, so I can determine if they are benign, or indicative of a bigger problem. Thanks.

    Read the article

  • Multiple SSL certificates on one server

    - by Kyle O'Brien
    We're hosting two websites on our fairly tiny but dedicated production server. Both website require SSL authentication. So, we have virtualhosts set up for both of them. They both reference their own domain.key, domain.crt and domain.intermediate.crt files. Each CSR and certificate file for each site was setup using its own unique information and nothing is shared between them (other than the server itself) However, which ever site's symbolic link (set up in /etc/apache2/sites-enabled) is reference first, is the site who's certificate is referenced even if we're visiting the second site. So for example, assume our companies are Cadbury and Nestle. We set up both sites with their own certificates but we create Cadbury's symbolic link in apache's site-enabled folder first and then Nestle's. You can visit Nestle perfectly fine but if you check the certificate installation, it reference's Cadbury's certificate. We're hosting these websites on a dedicated Ubuntu 12.04.3 LTS server. Both certificates are provided by Thawte.com. I came across a few potential solutions with no degree of success. I'm hoping someone else has a decent solution? Thanks Edit: The only other solution that seems to have provided success to some people is using SNI with Apache. However, the setups here didn't seem to coincide with our setup at all.

    Read the article

  • Debian: Unable to mount a second drive as a subdirectory inside of another partition.

    - by jkndrkn
    Hello. I have the following /etc/fstab: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/md1 / ext3 defaults,errors=remount-ro 0 1 /dev/md0 /boot ext3 defaults 0 2 /dev/md5 /home ext3 defaults 0 2 /dev/md3 /opt ext3 defaults 0 2 /dev/md6 /tmp ext3 defaults 0 2 /dev/md2 /usr ext3 defaults 0 2 /dev/md4 /var ext3 defaults 0 2 /dev/md7 none swap sw 0 0 /dev/sdc /home/httpd ext3 defaults 0 2 /dev/hda /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/sdc1 /mnt/usb/backup-1 auto defaults 0 0 I am unable to get /dev/sdc/ to mount at /home/httpd/ on reboot. The /home/httpd/ directory exists. Mounting via mount -t ext3 /dev/sdc /home/httpd works just fine. Mounting via mount -a generates the following error message: mount: you must specify the filesystem type This is, incidentally, the same message that I see while booting. The error message goes away if I comment out the line in fstab starting with /dev/sdc.

    Read the article

  • Routing Traffic With OpenVPN

    - by user224277
    Few minutes ago i configured my VPN server, and actually I can connect to my VPN but all trafic is going through my normal home network. On my OpenVPN application I've got an information : Server IP: **.185.***.*10 Client IP: 10.8.0.6 Traffic: 7.3 KB in, 5.6 KB out Connected: 10 June 2014 19:21:59 So everything is connected but how I can setup on windows 7 that all trafic have to go through OpenVPN network card ?? Client setting : client dev tun proto udp # enter the server's hostname # or IP address here, and port number remote **.185.***.*10 1194 resolv-retry infinite nobind persist-key persist-tun # Use the full filepaths to your # certificates and keys ca ca.crt cert user1.crt key user1.key ns-cert-type server comp-lzo verb 6 Server setting : port 1194 proto udp dev tun # the full paths to your server keys and certs ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key dh /etc/openvpn/keys/dh2048.pem cipher BF-CBC # Set server mode, and define a virtual pool of IP # addresses for clients to use. Use any subnet # that does not collide with your existing subnets. # In this example, the server can be pinged at 10.8.0.1 server 10.8.0.0 255.255.255.0 # Set up route(s) to subnet(s) behind # OpenVPN server push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" ifconfig-pool-persist /etc/openvpn/ipp.txt keepalive 10 120 status openvpn-status.log verb 6 and sysctl : net.ipv4.ip_forward=1 Thank you for your time and help.

    Read the article

  • "merging" multiple internet connections

    - by Spencer R
    I've seen this question asked several times here on SF, but I'm looking for some updated information; specifically concerning Server 2012. I'm in the process of buying a home so I'm trying to get some plans together on how I want to structure my network. Internet speeds aren't the greatest and connections can be unreliable where the house is so I was thinking of having two DSL lines installed. My question is, how could I leverage those two connections to create the best network I can, in terms of speed and reliability. My parents will be moving in with me - they consume a lot of bandwidth as it is, but then add my internet traffic to it, and I'm headed for a lot of frustration. I thought I remember reading somewhere that Server 2012 has some new functionality to utilize multiple connections on multiple NICs in a way that wasn't possible in earlier versions of Server. Not sure if Windows will work but, I'm an application developer and spend the majority of my time in Windows environments. However, I've only recently returned to the Windows world, so I'd like my main server at home to run Win Server 2012 so that I can become more familiar with it.

    Read the article

  • Understanding MySQL Query Caches and when to implement it?

    - by Jeff
    On our current MySQL server query cache is enabled. Qchache_hits: 31913 Qchache_inserts: 50959 Qchache_lowmem_prunes: 9320 Qchache_not_chached: 209320 Qchache_queries_in_chace: 986 com_update: 0 com_delete: 0 I do not fully understand the Query cache - I am reading about it currently and trying to understand it. Our database holds inventory data, customer data, employee data, sales data and so forth. The query is very rarely run more than once. The possibility of a query being run twice is viewing a specific sales information twice. But basically everything in our system changes constantly. It is always being updated, deleted, insterted and off the top of my head I can't picture users running the same query twice within a week. Do I even need to have the query cache enabled? I am guessing that the inserts means 51k entries have been added, but only 986 of those are being stored? Would an idea be to refresh the cache, and watch it for a week and check how many of the queries in cached are accessed maybe on a weekly basis to see if it is actually returning any benefits? Any help/guidance on this is appreciated, thanks

    Read the article

  • Could I have destroyed Partitioning-Scheme/Filesystem of HDDs with External Harddrive Case with builtin Raid-Controller?

    - by th3m3s
    I had just recently bought a Fantec QB-35US3R to have a nice box on my desk to make some backups to. Along with the HDD-Bay I had ordered some 4TB HDDs to let them run in Raid 5, which is handled by the hardware RAID controller of the Fantec HDD-Bay. The QB-35US3R arrived a few days before the hard drives, so I got impatient and had the idea to put three old 1TB disks in the Fantec device, just to test it... Long story short: I made a backup of the most important data on these three disks before they broke. I had set the configuration scheme to RAID 3 at the Fantec device. It seems, that the Fantec RAID controller has "somehow" destroyed the partitioning scheme or the file system, because when put into a HDD docking station, they get recognized by the OS (Ubuntu/Linux) but are not mountable anymore. I tried to recover the data from one HDD via gParted (parted), which ran some hours without success. Here I stopped, before trying other tools, cos I read that the longer a hard drive is running after a the partitioning got destroyed, the worse it gets. What could the HDD-Bay probably have done to my lovely hard drive disks? Is there some routine a RAID controller is executing, when it wants to create a RAID system? Like erasing the partition table (seems not plausible to me.) or writing some information to every hard drive in the RAID (seems more likely to me.)? Is there a chance to recover the data from these HDDs, or is the change a RAID controller makes so significant, that no software is of help?

    Read the article

  • How do I know if I managed to completely remove an undetected trojan?

    - by ubuntuisbetter
    I catched a trojan that uses explorer.exe to reproduce itself in case of deletion of its autostart entry or main exe file in Programs/x. It had already tried to contact a suspicious server over explorer.exe, blocked that via my firewall. I: Removed the autostart entries from the registry Looked through my services if there was anything suspicious Deleted the trojan from Programs/ Went through System Volume Information to find a 2 month old explorer.exe and replaced the possibly infected one. There are no suspicious processes running now anymore (no duplicate explorer.exe) and nothing wants to connect this trojan owners sever either. I checked my system with several anti-malware programs too. What the trojan did: Started a second explorer.exe Always when I deleted the main trojan exe file it was reproduced (by the second explorer.exe) Always when I deleted the autostart entry it was reproduced by the explorer.exe too. When I terminated the suspicious explorer.exe, which used only half as much memory as the less suspicious one from Windows, a strange thing that I know from the computers in my Informatics class happened: A window popped up in the top left of my explorer-less desktop, titled "Personal settings for ... are ..." that obviously copied some files. Then both explorer.exes started again and the trojan was everywhere again. What did the trojan actually do to get explorer to rescue it? Is my PC clean of this newish trojan now? What are the other locations I should check for the trojan? The trjoan doesn't seem very high-level, could it have changed other system files or is the autostart entry vital for it? Thanks in advance, Your trojan paranoid friend (Getting linux in a week)

    Read the article

  • SQL Server 2005 Disk Configuration: Single RAID 1+0 or multiple RAID 1+0s?

    - by mfredrickson
    Assuming that the workload for the SQL Server is just a normal OLTP database, and that there are a total of 20 disks available, which configuration would make more sense? A single RAID 1+0, containing all 20 disks. This physical volume would contain both the data files and the transaction log files, but two logical drives would be created from this RAID: one for the data files and one for the log files. Or... Two RAID 1+0s, each containing 10 disks. One physical volume would contain the data files, and the other would contain the log files. The reason for this question is due to a disagreement between me (SQL Developer) and a co-worker (DBA). For every configuration that I've done, or seen others do, the data files and transaction log files were separated at the physical level, and were placed on separate RAIDs. However, my co-workers argument is that by placing all the disks into a single RAID 1+0, then any IO that is done by the server is potentially shared between all 20 disks, instead of just 10 disks in my suggested configuration. Conceptually, his argument makes sense to me. Also, I've found some information from Microsoft that seems to supports his position. http://technet.microsoft.com/en-us/library/cc966414.aspx In the section titled "3. RAID10 Configuration", showing a configuration in which all 20 disks are allocated to a single RAID 1+0, it states: In this scenario, the I/O parallelism can be used to its fullest by all partitions. Therefore, distribution of I/O workload is among 20 physical spindles instead of four at the partition level. But... every other configuration I've seen suggests physically separating the data and log files onto separate RAIDs. Everything I've found here on Server Fault suggests the same. I understand that a log files will be write heavy, and that data files will be a combination of reads and writes, but does this require that the files be placed onto separate RAIDs instead of a single RAID?

    Read the article

  • apache front-end rewriting URL to different https ports?

    - by khedron
    Hi all, One of my users is having some trouble with forwarding to an internal web app from a public address. Everything worked fine for him when the situation was like this: front page: http://www.myexample.com/ public ref to internal app: http://www.example.com/app-8903/app.html secretly goes to: http://secret.example.com:8903/app-8903/app.html This is to say, my user is providing the very last URL, with the port information duplicated in the URL base, and they were using that to give a public face that hid both the port and the internal machine name. You could still read the port in the URL base if you looked, but the obvious reference and machine name were hidden. Doing it this way, he could have several different instances of the application running on secret.example.com with different ports, and on the front end it just looked like it was changing the URL directory/base. Now the user wants to do the same thing over https:, and the people helping him with apache config say it can't be done. Is that so? Without being there to tinker with the configuration myself, I'm not sure what his IT people have tried, but reading through the apache2 SSL FAQ and other docs, it seems like it should be possible to rewrite URLs to different ports and still use https:.

    Read the article

  • How can I tell System Restore in WIndows 7 recovery console to use my recovered backup drive's restore point data?

    - by Rich Shealer
    My Windows 7 desktop PC failed to boot. It would get to a grayish screen with a mouse and would only respond to the power button. After much examination I found that the problem was not a failed drive as running CHKDSK from the Recovery Console on my main drives passed without any errors. I had been installing various Java version in the days before the failure so I decided to use a restore point to roll backwards. I have an external SATA drive controller with two 2 TB drives mirrored using the Windows mirroring function. My system has been backing up to this drive regularly. The problem is I accidently broke the mirror when testing to see if this drive system might have been causing my boot issue. Connecting it to another machine showed two dynamic drives that were invalid. In the end I reformatted one as an NTFS basic disc and used recovery software on the other to copy all of the files to the reformatted drive. I had to copy the restore points into the new drive's System Volume Information folder by granting rights to that user. I moved the drive back to the original machine and rebooted. I can see my new drive, it even uses the same drive letter as it did in normal mode. Running System Restore it lists a new Automatic Restore point created while sitting at the RC along with all of my backups. Selecting the backup I want (or any other) I get a dialog. The backup drive could not be found. System Restore is looking for restore points on your backup. Make sure the backup drive is on and connected to this computer and then click OK. What do I need to do to allow system restore to see the restore points?

    Read the article

  • Cannot access Domain Controller through VPN

    - by Markus
    In our small network there is a Windows 2008 R2 Domain Controller that also serves as Remote Access Server. For years, we could access this server and the resources in the network over a VPN connection without any problem. Since some time however, I am able to connect to the VPN, but my Windows 8 client (and another one I used for testing purposes) is not able to connect the domain controller afterwards. I can access any other server in the network, but there seems to be a problem regarding the trust between the client(s) and the server. If I connect the client to the network directly over a LAN cable, everything works as expected. Also I can connect to another server over VPN and open a RDP prompt to the DC without a problem. On the client, whenever I try to access the DC, I get an access denied message. I've tried to update the group policies both over VPN and LAN. Also, I've removed the client from the domain and re-added it. The client shows a message that Windows requires valid login information when connected to the VPN - but my credentials are valid. They work when I logon to the client when not connected to the VPN and also when connected to the LAN. Turning off the firewall on the client and the server did not change anything. DNS resolution works both on the server and the client. What else can I do to diagnose and solve the problem?

    Read the article

  • Installed Memory (RAM): 8GB (4GB Useable)

    - by Mike Bannister
    I have 4X 2GB RAM sticks installed, Windows 7 Ultimate x64 shows "Installed Memory (RAM): 8GB (4GB Useable)" in the system information. The motherboard says it supports up to 16GB of memory. I had Windows XP x64 and I'm pretty sure it was able to use all 8Gigs of memory. I've just formatted and am not burning through 4GB for sure. *The BIOS only show 4096MB while booting. I was only able to find one option relating to memory mapping and it took it from 4Gigs to 3 and change. CPU-Z shows all 4 sticks as 2048MB I went in to msconfig and checked the limits, they are not set. I tried resetting the CPU and RAM sticks 3 times, the CPU has no pins to be bent (flat contacts, I5) I rearranged all the RAM. I have separate video memory from the system memory. I have a 64 bit OS (I am 100% certain) Hardware: Memory: Four Corsair XMS3 TW3X4G1333C9AG Motherboard: Asus P7P55D Pro CPU: Intel Core i5-760 BX80605I5760 Graphics: Two ZOTAC ZT-50401-10L GeForce GTX 550 Ti If anyone has new ideas or knows the exact setting in the bios, it would be greatly appreciated.

    Read the article

  • Dump Trac DB on Windows/XAMPP

    - by Whiteknight
    I have a Trac instance running on a WindowsXP machine with XAMPP. I am trying to migrate the trac instance to a newer Linux-based machine. However, I'm having a hard time getting the database to cooperate. I try to dump the db with this command: sqlite3 C:\tracroot\db\trac.db ".dump" >> mysqldump.sql But the generated file is mostly empty: BEGIN TRANSACTION; COMMIT; So that's not right. For the record my trac instance is running now and appears to have full access to all the contents of the DB. But sqlite3 (located in C:\xampp\apache\bin) can't seem to get any information from the file. The DB file itself has the header "SQLite format 3", so that seems to be correct. I need to know one of two things: How to get this dump working OR An alternate way to migrate the Trac database to the new machine. Update: When I try to open the .db file in sqlite3, I get the error Error: unsupported file format. What format is it in, and why is it unsupported?

    Read the article

  • Apache mod_disk_cache on a seperate drive

    - by pavs
    how can I set Apache mod_disk_cache on a separate drive from where the OS/Apache is installed? I have set up this on my apache2.conf: <IfModule mod_cache_disk.c> # cache cleaning is done by htcacheclean, which can be configured in # /etc/default/apache2 # # For further information, see the comments in that file, # /usr/share/doc/apache2/README.Debian, and the htcacheclean(8) # man page. # This path must be the same as the one in /etc/default/apache2 CacheRoot /media/cacheHD # This will also cache local documents. It usually makes more sense to # put this into the configuration for just one virtual host. CacheEnable disk / # The result of CacheDirLevels * CacheDirLength must not be higher than # 20. Moreover, pay attention on file system limits. Some file systems # do not support more than a certain number of inodes and # subdirectories (e.g. 32000 for ext3) CacheDirLevels 2 CacheDirLength 1 </IfModule> and it doesn't seem to be caching anything at all. The drive itself is a freshly installed ssd drive formatted with ext4.

    Read the article

  • Is there a 'global media cache' in Windows 7 that may be used by third party media players?

    - by Pulse
    Here's the background. I don't use Windows Media Player or Media Centre, in fact both components have been 'turned off' via the 'Programs and Features' option. My media player of choice is a nightly build of MPC-HC, which plays virtually everything. I do, however, have VLC portable available for those rare instances when MPC-HC can't or won't play something correctly. This is the situation. I tend to download various media files via torrent, typically, game trailers or freely availably films, such as the recently released, torrent only, Pioneer One. Quite often these files are quite large, being 1GB+ so I quite often like to preview the file after it has downloaded a significant portion of the file. For the most part, this works quite well, and gives me an idea about the worth of continuing the download. Sometimes, however, the file doesn't play as expected and instead plays a completely unrelated file that has been previously played. Here's the strange thing. if I try to preview the file in MPC-HC or VLC both players play the same, previously played file, regardless of whichever player was originally responsible for playback. Most times, it's not even a file that's been played recently. I have searched the registry for some sort of MRU cache, but have found nothing. I have made sure each player has had it's respective history/cache deleted and can fine nothing on disk that seems to be storing this, apparently shared data. So, the question is, where are these unrelated players getting the file information from? Thnaks.

    Read the article

< Previous Page | 780 781 782 783 784 785 786 787 788 789 790 791  | Next Page >