Search Results

Search found 22912 results on 917 pages for 'hosted service'.

Page 786/917 | < Previous Page | 782 783 784 785 786 787 788 789 790 791 792 793  | Next Page >

• Windows XP - Power surge on hub port

  - by Swift-Tuttle

  Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

  Read the article

• Windows 7 Not Starting and System Repair Not Loading

  - by Mark

  I have a Dell Inspiron 1545 running Windows 7 When turning on my PC I keep receiving a black screen with the option to use System Repair or Start Normally. Both options lead me to the System Repair background except no matter how long I wait the system restore options never show up. Choosing F8 and running all of the options including safe mode encounters the same result above. I tried to to use 2 system recovery disks 32x and 64x I downloaded and both lead to similiar results. When I choose System Repair running from the disk the System Repair Question asking to select a language pops ups but after this no matter how long I wait no other options appear. Next after restarting and selecting F8 (after hitting f12 and running from CD) I choose 'Run From Safe Mode with Command Prompt' I am able to run all of the options from System Restore with differing results: Startup Repair: Choosing this ends up in system repair indefinitely (left running 12 hrs) System Restore: Does Nothing. PC thinks for a second and then stops. When selecting ShutDown I see an error message stating there are no restore points. System Image Recovery: Service Cannot be started in Safe Mode Windows Memory Diagnostic: Runs test but then leads to system repair background which never loads system repair Command Prompt: chkdsk /r -Cannot Lock Current Drive...write protected. chkdsk /f -Cannot Lock Current Drive...write protected. bootcfg - Cannot open Boot.Ini file bootcfg - Ran all 3 (rebuildBcd, FixMbr and Fixboot) but PC still goes to System Repair background with no repair options popping up upon restart (without recovery CD). I'm on the verge of purchasing a boot utility disk for $50 unless there is anything else short of "take it to a computer shop" that somebody can suggest I try.

  Read the article

• HP Procurve 2610 intervlan routing

  - by user19039

  Can anyone tell me why inter vlan routing is working for all vlans except my newly created vlan 4/ I have an hp procurve 2610. Any help would be appreciated. I have basically this 1 switch with all unmanaged switches attached to the core. We have a second 2610 on port 28 Running configuration: ; J9085A Configuration Editor; Created on release #R.11.25 hostname "Core_HP" interface 22 speed-duplex 100-full exit ip routing snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 1-12,17-22,26-27 ip address 192.168.4.6 255.255.255.0 tagged 25 no untagged 13-16,23-24,28 exit vlan 2 name "WAN" untagged 28 ip address 10.254.254.3 255.255.255.0 exit vlan 3 name "Wireless" untagged 13-16,24 ip address 192.168.7.6 255.255.255.0 ip helper-address 192.168.4.2 tagged 27 exit vlan 35 name "guest" untagged 23 tagged 24 exit vlan 4 name "esxi" untagged 25 ip address 10.10.1.1 255.255.248.0 exit ip route 192.168.5.0 255.255.255.0 10.254.254.1 ip route 192.168.6.0 255.255.255.0 10.254.254.1 ip route 0.0.0.0 0.0.0.0 192.168.4.10 show ip route IP Route Entries Destination Gateway VLAN Type Sub-Type M etric Dist. ------------------ --------------- ---- --------- ---------- - --------- ----- 0.0.0.0/0 192.168.4.10 1 static 1 1 10.10.0.0/21 esxi 4 connected 0 0 10.254.254.0/24 WAN 2 connected 0 0 127.0.0.0/8 reject static 0 250 127.0.0.1/32 lo0 connected 0 0 192.168.4.0/24 DEFAULT_VLAN 1 connected 0 0 192.168.5.0/24 10.254.254.1 2 static 1 1 192.168.6.0/24 10.254.254.1 2 static 1 1 192.168.7.0/24 Wireless 3 connected 0 0 show ip Internet (IP) Service IP Routing : Enabled Default TTL : 64 Arp Age : 20 VLAN | IP Config IP Address Subnet Mask Prox y ARP ------------ + ---------- --------------- --------------- ---- ----- DEFAULT_VLAN | Manual 192.168.4.6 255.255.255.0 No WAN | Manual 10.254.254.3 255.255.255.0 No Wireless | Manual 192.168.7.6 255.255.255.0 No esxi | Manual 10.10.1.1 255.255.248.0 No guest | Disabled

  Read the article

• mod_jk problem: Tomcat is probably not started or is listening on the wrong port

  - by Konrad

  Hi, I am running some application on Tomcat 6.0.26. There is Apache in front of web server talking to it over mod_jk. Every few hours when I try to access application browser simply spins, and no content is retrieved. No error is reported in Tomcat logs, but I fond such errors in mod_jk log: [Sun Jul 04 21:19:13 2010][error] ajp_service::jk_ajp_common.c (1758): Error connecting to tomcat. Tomcat is probably not started or is listening on the wrong port. worker=***** failed [Sun Jul 04 21:19:13 2010][info] jk_handler::mod_jk.c (1985): Service error=0 for worker==***** [Sun Jul 04 21:19:13 2010][info] ajp_connection_tcp_get_message::jk_ajp_common.c (955): Tomcat has forced a connection close for socket 46 [Sun Jul 04 21:19:13 2010][info] ajp_connection_tcp_get_message::jk_ajp_common.c (955): Tomcat has forced a connection close for socket 46 [Sun Jul 04 21:19:13 2010][info] ajp_connection_tcp_get_message::jk_ajp_common.c (955): Tomcat has forced a connection close for socket 46 [Sun Jul 04 21:19:13 2010][error] ajp_get_reply::jk_ajp_common.c (1503): Tomcat is down or refused connection. No response has been sent to the client (yet) [Sun Jul 04 21:19:13 2010][error] ajp_get_reply::jk_ajp_common.c (1503): Tomcat is down or refused connection. No response has been sent to the client (yet) [Sun Jul 04 21:19:13 2010][info] ajp_connection_tcp_get_message::jk_ajp_common.c (955): Tomcat has forced a connection close for socket 46 [Sun Jul 04 21:19:13 2010][error] ajp_get_reply::jk_ajp_common.c (1503): Tomcat is down or refused connection. No response has been sent to the client (yet) [Sun Jul 04 21:19:13 2010][info] ajp_connection_tcp_get_message::jk_ajp_common.c (955): Tomcat has forced a connection close for socket 45 [Sun Jul 04 21:19:13 2010][info] ajp_connection_tcp_get_message::jk_ajp_common.c (955): Tomcat has forced a connection close for socket 46 [Sun Jul 04 21:19:13 2010][info] ajp_service::jk_ajp_common.c (1721): Receiving from tomcat failed, recoverable operation attempt=0 my worker is configured in following way: worker.admanagonode.port=8009 worker.admanagonode.host=*****.com worker.admanagonode.type=ajp13 worker.admanagonode.ping_mode=A worker.admanagonode.socket_timeout=60 worker.admanagonode.prepost_timeout=10000 worker.admanagonode.connect_timeout=10000 worker.admanagonode.connection_pool_size=200 worker.admanagonode.connection_pool_timeout=300 worker.admanagonode.retries=20 worker.admanagonode.socket_keepalive=1 worker.admanagonode.cachesize=10 worker.admanagonode.cache_timeout=600 Tomcat has same port number in Connector configuration: <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" address="*********" /> Does any of you has any ideas what i am missing? What can cause such problems? Cheers Konrad

  Read the article

• Mail server: can't connect via POP/IMAP

  - by MelkerOVan

  I've followed this guide on setting up a mail server on my dedicated server. I've been able to send mails from the php application I'm using and the linux commandline (using telnet, php, etc). The problem is that I cannot connect to the server via IMAP/POP which I've setup using Courier. I've tried using thunderbird but it complains that the username or password is wrong. I doubt it is the username/password but I don't know how to trouble shoot this. Edit: Here's the messages in mail.log: Jan 9 22:43:38 mail authdaemond: received auth request, service=imap, authtype=login Jan 9 22:43:38 mail authdaemond: authmysql: trying this module Jan 9 22:43:38 mail authdaemond: SQL query: SELECT id, crypt, "", uid, gid, home, "", "", name, "" FROM users WHERE id = '[email protected]' AND (enabled=1) Jan 9 22:43:38 mail authdaemond: password matches successfully Jan 9 22:43:38 mail authdaemond: authmysql: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/spool/mail/virtual, [email protected], fullname=peter, maildir=<null>, quota=<null>, options=<null> Jan 9 22:43:38 mail authdaemond: authmysql: clearpasswd=<null>, passwd=password Jan 9 22:43:38 mail authdaemond: Authenticated: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/spool/mail/virtual, [email protected], fullname=peter, maildir=<null>, quota=<null>, options=<null> Jan 9 22:43:38 mail authdaemond: Authenticated: clearpasswd=peter, passwd=password Jan 9 22:43:38 mail imapd: chdir Maildir: No such file or directory

  Read the article

• /etc/crontab or any user crontab is not being executed

  - by ian

  My server is CentOS 5. When I edit /etc/crontab or edit any user(including root) crontab via "crontab -e" command, it just adds "(system) RELOAD (/etc/crontab)" or "(admin) RELOAD (cron/admin)" in the log. No CMD in the /var/log/cron. Sample entry in /var/log/cron: Aug 10 10:21:33 localhost crontab[31688]: (root) BEGIN EDIT (root) Aug 10 10:21:42 localhost crontab[31688]: (root) REPLACE (root) Aug 10 10:21:42 localhost crontab[31688]: (root) END EDIT (root) Aug 10 10:22:01 localhost crond[2688]: (root) RELOAD (cron/root) Result of "service crond status": crond (pid 1345) is running... The command "cat /var/log/messages | grep cron" does not give anything. Contents of /etc/cron.allow: admin root Contents of /etc/crontab: SHELL=/bin/bash PATH=/sbin:/bin:/usr/sbin:/usr/bin MAILTO=root HOME=/ # run-parts 01 * * * * root run-parts /etc/cron.hourly 02 4 * * * root run-parts /etc/cron.daily 22 4 * * 0 root run-parts /etc/cron.weekly 42 4 1 * * root run-parts /etc/cron.monthly * * * * * root run-parts /bin/date >> /data/date.txt Result of ps aux |grep cron: root 1345 0.0 0.1 5268 1204 ? Ss 11:43 0:00 crond Contents of admin's crontab: * * * * * /bin/date >> /data/date.txt Note that it's not only admin's crontab that's not running. All cron jobs are not running. Any ideas why they aren't running?

  Read the article

• New keyboard for linux: Adesso Tru-Form or MS Natural Keyboard 4000?

  - by Andrea

  Hi folks! I'm going to buy a new ergonomic keyboard for my laptop. In the following, keep in mind I live in Italy. I considered the following models: Adesso PCK-308UB - Adesso Tru-Form™ Pro - Contoured Ergonomic Keyboard with TouchPad-PS2 Pro: has a built-in touchpad in the same position of my laptop somewhat cheaper than the alternative below Cons: the surface doesn't seem to be bowl-shaped. keys seem to lay on a straight slightly-inclined surface. It seems an idea used extensively in other ergonomic keyboards according to a few comments on the net, new Adesso keyboards seem to lack robustness, they're likely to loose small parts after a few weeks or months. Other users, instead, seem to never had any problem in years and swear by their quality and comfortability. Those who had problems, however, lamented a lack of responsiveness from the manufacturer. I'm not sure whether the keyboard, at least the standard keys, and the touchpad will both be recognized correctly under linux distros (I mostly use FC btw) last time I checked, Adesso didn't have local resellers in my country Microsoft Natural Ergonomic Keyboard Pro: recognized as one of the most comfortable keyboards reliable customer service operating in my country AFAIK there are several documented ways to get extra buttons work with linux Cons: it doesn't have a builtin touchpad and has a numeric keypad wasting space to reach mouse But there could be other keyboards I haven't considered yet, so here follows my ideal keyboard wishlist, ordered by priority linux compatible basic ergonomic design, which entails split tilted keyboard and pads advanced ergonomic design, like true-ergonomic's or kinesis , where special keys (like enter, caps-lock...) are placed symmetrically in the middle to be used by thumbs a builtin touchpad/trackball placed under the keyboard. I just love this on my notebook. I think it's pretty effective, since it allows my hand to rest naturally everytime I use it. Any opinion on this? high-quality switches, like cherry's (unsure about this one) additional programmable keys placed near usual ones, to simplify typing shortcuts TIA Andrea

  Read the article

• How to stop DW20.exe running on Win 2003 Server

  - by Laurence

  Periodically my ASP.NET application crashes (usually because memory consumption exceeds maximum allowed by application pool) and DW20.exe starts up. This is a big problem because it uses huge amounts of memory and CPU for minutes at a time. I want to know how to stop DW20.exe from running. Please note, I have already tried these often mentioned solutions: Disabling error reporting in Control Panel System Advanced Error Reporting Disabling the Error Reporting Service Modifying the registry as in http://support.microsoft.com/kb/841477 (however I might have done this wrong - this doc says "add a DWReportee value of 1" - what I did was add a DWORD entry with hexadecimal value of 1 - is this right? Also only 2 of the 4 keys were present, so I only modified these, e.g. there was no HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\PCHealth key at all) So, zero points for suggesting any of the above (unless you can see I have modified the registry incorrectly)! Also zero points for suggesting I resolve whatever is causing the application crashes :) - I am figuring this out, I just want something in the mean time to stop DW20.exe eating up all the server resources. By the way, this is a Windows 2003 SP1 server, with IIS 6 and SQL 2005 installed. There is no MS Office.

  Read the article

• How do I fix a custom Event Viewer Log that merges automatically with the Application log?

  - by NightOwl888

  I am trying to create a custom event log for a Windows Service on Windows Server 2003. I would like to name the custom log "(ML) Startup Commands". However, when I add a registry key with that name to HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\, it adds a log but shows the exact same events that are in the Application log when looking in the event viewer. If I add a registry key with the name "(ML) Startup Commands 2" to the event log, it shows a blank event log as expected. In fact, any other name will work correctly except for the one I want. I have searched through the registry for other keys with the string "(ML)" and removed all other references to this key name, however I continue to get merged results in the viewer when I create a key with this name. My question is, how can I fix the server so I can create a custom event log with this name that shows only the events from my application, not the events from the default Application event log that is installed with Windows? Update: I rebooted the server and woudn't you know it, the log started acting normally. I got a strange error message in the Application log: The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I can only hope this error doesn't mean the problem will come back after 86400 seconds. I guess I will have to wait and see.

  Read the article

• How to eliminate overscan on Ubuntu HTPC

  - by Norman Ramsey

  I'm using an Ubuntu box with Nvidia graphics card as an HTPC. My HDTV is a Sony Bravia KDS-R50XBR1; this is a rear-projection unit with many inputs. I am using the HDMI input. I'm using the proprietary Nvidia drivers and they recognize the 1080x1920 resolution just fine. The display is a little fuzzy but at 50 inches it's perfect for movies. My problem is that the TV has three overscan settings, and none of them reduces overscan to zero. When I was using dual-screen this was fine, but I'm moving to where the TV is my only screen, and the Gnome panels are not visible because of the overscan. I'd like to figure out how to eliminate the overscan, without trying to scale my 1080p content down to 920p or something ridiculous like that. Ideally there would be some scurvy trick, perhaps involving the TV service menu, to get rid of the overscan on the TV side. Or I could move the Gnome panels, but I still would be missing the edges of my movies. Suggestions most welcome.

  Read the article

• Configure J2EE Agent with OpenAM behind Reverse Proxy

  - by Troy

  I have a reverse proxy with two SSL enabled NamedVirtualHosts on different ports. Both containers on each internal host is GF 2.1.1. Proxy configuration as follows: Proxy URL -> Internal URL https://apps.mydomain.com -> http://apps.internal.com https://secure.otherdomain.com:8080/ -> http://secure.internal.com I initially tried configuring the J2EE agent in OpenAM and the web app container to use the internal URLs (I appended /openam and /agentapp respectively). However, I received the following errors when trying to access a secured application such as https://apps.mydomain.com/webapp. java.lang.RuntimeException: Failed to load configuration: ApplicationSSOTokenProvider.getApplicationSSOToken(): Unable to get Application SSO Token A second attempt gives the following error: java.lang.NoClassDefFoundError: Could not initialize class com.sun.identity.agents.filter.AmFilterManager Along with these in the agent debug.out: ERROR: Failed to obtain auth service url from server: null://null:null ... SiteMonitor: Site URL http://secure.internal.com/openam/namingservice is not available. If I specify the server and agent urls using the proxy urls, then the agent appears to be working and I am redirected to the OpenAM login page. However, the goto in the URL is http://apps.mydomain.com/webapp instead of https://apps.mydomain.com/webapp (missing https). So after authentication, the redirect fails. Now I could possibly get by with mod_rewrite, but it feels hackish and I really want to know what's going on. Any ideas?

  Read the article

• Load Testing a Security/Gateway Appliance

  - by Joel Coel

  In a couple weeks I will load testing a security/gateway appliance. We're a small residential college, and that "residential" means the traffic moving through the appliance is a bit like the Wild West. We have everything from Facebook to World of Warcraft, BitTorrent to Netflix, or Halo to YouTube... basically anything you might find in the home of a high-school or college aged person. Somewhere in there some real academic work gets done as well. We rely on our current appliance for traffic shaping, antivirus, malware filtering, intrusion detection on our servers, logging and abuse reporting, and even some content filtering. All this puts a decent load when we have students around, and I'm concerned about the ability of the new candidate to keep up. On paper it should handle things, but I'm worried. Prior experience is that vendors greatly over-report what an appliance can handle. The product also includes a licensed session limit, and I'm also worried that just a few misbehaving students could unwittingly bring us to that limit and cause service disruptions. I need to know this will work for our campus in order to commit to it. Going a performance level higher in that product takes the pricing way out of line with what we expect and have done in the past. What I need is a good way to load test this guy. My problem is that our current level of summer traffic is less than one percent of what it will be when students come back just six weeks from now. Any ideas on how to really stress this thing and see what it can do, in a way that will give me some clear ideas o. How that will scale for our campus? For the curious, I'm looking at a Watchguard 515, but it could be anything. If I were evaluating a competitor, I'd ask the same question.

  Read the article

• Sendmail in Nexenta core 3.0.1

  - by maximdim

  I'm trying to setup sendmail in Nexenta core 3.0.1 (Solaris based OS). All I want is to be able to send emails from that host - like notifications about failures, cron jobs output etc. Initially Nexenta core doesn't have sendmail so here is what I've done: apt-get install sunwsndmu Now there is a sendmail in /usr/sbin/sendmail. When I try to send email from command line: $mail maxim test . It doesn't give me any error but in log file I see: Dec 20 12:41:08 nas sendmail[12295]: [ID 801593 mail.info] oBKHf8u7012295: from=maxim, size=107, class=0, nrcpts=1, msgid=<201012201741.oBKHf8u7012295@nas>, relay=maxim@localhost Dec 20 12:41:08 nas sendmail[12295]: [ID 801593 mail.info] oBKHf8u7012295: to=maxim, ctladdr=maxim (1000/10), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30107, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1] So I guess I need to have SMTP service running. How do I do that in Nexenta? svcs -a | grep sendmail doesn't return anything and # svcadm enable sendmail svcadm: Pattern 'sendmail' doesn't match any instances I'm not married to sendmail so if there are easier ways to achieve y goal I'm open to suggestions as well. Thanks,

  Read the article

• FreeNAS AFP Doesn't Authenticate

  - by Timothy R. Butler

  I just set up a FreeNAS 8.0.3 server and am trying to use its AFP (Netatalk) service to access it via a Mac OS X Lion system. I created the ZFS volume, set its permissions to include my user in its owner group (and set group write permissions), created an AFP share with AFP3 and told that share to "allow" @uninet (my group). I have a user on the server named tbutler, matching the user on my Mac. I can see the server, "Beatrice," in Finder. When I try to login in Finder using "Connect As...," the user "tbutler" and the proper password, I am returned to the main Finder window with the black bar now saying "Connection Failed." Here's the most recent data from /var/messages on the server, which shows me trying to login both as a "Registered User" and a "Guest": Jul 30 00:29:07 freenas afpd[8972]: AFP3.3 Login by nobody Jul 30 00:29:08 freenas afpd[8972]: AFP logout by nobody Jul 30 00:29:08 freenas afpd[8972]: dsi_stream_read: len:0, unexpected EOF Jul 30 00:29:08 freenas afpd[8972]: afp_over_dsi: client logged out, terminating DSI session Jul 30 00:29:08 freenas afpd[8972]: AFP statistics: 0.14 KB read, 0.12 KB written Jul 30 00:29:14 freenas afpd[8975]: AFP3.3 Login by tbutler Jul 30 00:29:14 freenas afpd[8975]: AFP logout by tbutler Jul 30 00:29:14 freenas afpd[8975]: dsi_stream_read: len:0, unexpected EOF Jul 30 00:29:14 freenas afpd[8975]: afp_over_dsi: client logged out, terminating DSI session Jul 30 00:29:14 freenas afpd[8975]: AFP statistics: 0.62 KB read, 0.48 KB written Jul 30 00:29:20 freenas afpd[8978]: AFP3.3 Login by tbutler Jul 30 00:29:20 freenas afpd[8978]: AFP logout by tbutler Jul 30 00:29:20 freenas afpd[8978]: dsi_stream_read: len:0, unexpected EOF Jul 30 00:29:20 freenas afpd[8978]: afp_over_dsi: client logged out, terminating DSI session Jul 30 00:29:20 freenas afpd[8978]: AFP statistics: 0.62 KB read, 0.48 KB written Jul 30 00:29:27 freenas afpd[8983]: AFP3.3 Login by nobody (My clock is clearly not properly set, but be that as it may...) Any suggestions? UPDATE: Apparently this problem occurs if one gives the AFP share a password in the AFP share settings box. When I removed the password and tried to login using a user account again, it worked just fine.

  Read the article

• AWS Application - Subscription Payments Scheduled but Not Initializing

  - by nicorellius

  I briefly browsed the AWS forums but these are not nearly as easy to use and efficient as Stack Exchange derived ones, so here I am... the company I work for has an app on the AWS cloud. In general the app works well. However, since it is new, we haven't had many customers and the ones who signed up are now coming to the point where their subscriptions to our service should be renewed. In comes my question. When I query the database for payment status of certain subscriptions using the console, I get what I would expect: Instrument XYZ is on a Monthly subscription (subscription=xxxyyyzz). The subscription is active with an expiration date of 19 Apr 2010 10:43 Z The payment token will expire on 1 Dec 2012 12:00 Z There are xy runs remaining. The subscription fee of $XX.xx will be charged on 17 Apr 2010 10:43 Z OK, this is great. According to this, I would expect the next payment to be initiated on 17 Apr. The reason I am asking is because for a different user last month I got this same output but the payment never went through, i.e., was not initiated through Amazon payments. The user didn't see the payment go through and neither did we. It should be noted that the initial payments were received. The sign up process works and if the user goes to "pay" from within our app, they will be directed to https://payments.amazon.com to make their payment. Any ideas?

  Read the article

• running red5 on port 80

  - by ArneLovius

  I have a red5 application http://code.google.com/p/openmeetings that runs under red5, and is accessible on port 5080 and 8443 I've installed it on Ubuntu 10.04 The eventual aim is to have it accessible via https on 443 instead of 8443, but I thought I would initially try on 80 so that any issues were just down to the port configuration and not SSL certificates. I've tried changing the port from 5080 to 80 in the red5.properties file, but it fails to start. In the red5.log I have seen ERROR o.a.coyote.http11.Http11Protocol - Error initializing endpoint java.net.BindException: Permission denied /0.0.0.0:80 In the error.log I have seen ERROR o.a.coyote.http11.Http11Protocol - Error initializing endpoint java.net.BindException: Permission denied /0.0.0.0:80 and ERROR org.red5.server.tomcat.TomcatLoader - Error loading tomcat, unable to bind connector. You may not have permission to use the selected port org.apache.catalina.LifecycleException: Protocol handler initialization failed: java.net.BindException: Permission denied /0.0.0.0:80 There is nothing else installed or running on port 80, so I presume that this is a "needs to be root" situation. I would rather not run an Internet accessible web service as root. I know that Tomcat can run on port 80 by changing “#AUTHBIND=no” to “AUTHBIND=yes” in /etc/default/tomcat6 but I have not been able to find anything similar for red5. Am I on a hiding to nothing, or is there better way than running as root ? Thanks!

  Read the article

• PNP4Nagios, nagiosgraph, separate Cacti, or something else for Nagios trending.

  - by Matt

  I've been using Nagios for a while now and recently started using Cacti after being dissatisfied with the lack of scaling and lack of any GUI in MRTG. I'm interested in adding trending to my Nagios installation and wondered what was the best route to go. I've looked around a bit and have seen what's available, but there's not a lot of information around to differentiate them from each other. My Nagios install has about 250 hosts and 1100 service checks, but many of them are just simple network devices and there's only about 20 servers and 300 services associated with them. All servers but 2 are running Windows Server 2003. What are the main highlights of PNP4Nagios vs. nagiosgraph, or would I be better off using some sort of tool to convert the data to RRD form and just view it directly in Cacti? Is there a completely different direction I could go that would be even better? Please comment if you need any more information, I tend to be too wordy and tried to keep this question brief. Thanks!

  Read the article

• IIS 7 URL Rewrite to GeoServer running on Apache

  - by Maxim Zaslavsky

  I'm building a mapping application based on OpenLayers that uses GeoServer to serve up mapping data. The problem I'm having is that besides the map images I'm requesting through WMS, I'm using jQuery AJAX to get information from GeoServer. As GeoServer is running on a different port, my requests are being blocked due to cross-site scripting security policies in JavaScript. As a Java application, GeoServer runs on Apache on port 8080, while my IIS instance is running on port 80. Instead of building a proxy, I've decided to use URL Rewriting in IIS7 to fix this problem. I'm following this guide, but it's still not working. Here are my URL Rewrite rule settings: Matches URL: (.*) Condition: {HTTP_URL} matching /geoserver Action: rewrite to http://localhost:8080/{R:1}, appending query string When I request http://localhost/geoserver/wms?QUERY_LAYERS=SanDiego:FWSA_sandiego&LAYERS=SanDiego:FWSA_sandiego&SERVICE=WMS&VERSION=1.1.1&FEATURE_COUNT=20&REQUEST=GetFeatureInfo&EXCEPTIONS=application/vnd.ogc.se_xml&BBOX=-13009123.590156,3862057.2905992,-13006066.109025,3865114.7717302&INFO_FORMAT=text/html&x=20&y=20&width=40&height=40&srs=EPSG:900913, however, all I get is a 404, although the same request on port 8080 returns the proper result. What am I doing wrong? Thanks in advance.

  Read the article

• script calling script as other user

  - by viktor tron

  Using CentOs, I want to run a script as user 'training' as a system service. I use daemontools to monitor the process, which needs a launcher script that is run as root: : #!/bin/bash exec >> /var/log/training_service.log 2>&1 setuidgid training training_command This last line is not good enough since for training_command, we need environment for training user to be set. : su - training -c 'training_command' gives 'standard in must be tty' as su making sure tty is present to potentially accept password. I know I could make this disappear by modifying /etc/sudoers a la Bash & 'su' script giving an error "standard in must be a tty" but i am reluctant and unsure of consequences. : runuser - training -c 'training_command' gives runuser: cannot set groups: Connection refused. I found no sense or resolution to this message. I am stuck. Is this something so hard to achieve? I appreciate all insight and guidance to best practice.

  Read the article

• Filtered Router Interface

  - by jviotti

  I'm having some problems with a Scientific-Atlanta DPR2320R2. In specific with the WIFI. A few months ago I changed its password and username and now I can't remember. So I tried cracking it with Hydra but it drove things worse. Content of webadmin was rendered partial, and threw lot of errors. I then reseted the router. I found myself abled to browse the web with ethernet-connected pc. Wifi is configured by registering the device's MAC Address, and indeed the router has been reseted and register MAC address were lost. No device could connect to wifi. In fact, the device does not even recognize the network. I tried the pointing to 192.168.0.1 to restablish the MAC's. But I couldn't connect to the router access point. Tried listing up hosts: $ nmap -sP 192.168.0.0/24 Starting Nmap 5.00 ( http://nmap.org ) at 2012-12-11 01:18 ART Host 192.168.0.1 is up (0.0018s latency). Host 192.168.0.11 is up (0.00025s latency). Nmap done: 256 IP addresses (2 hosts up) scanned in 59.62 seconds Then checked 192.168.0.1 was really up by sending pings. It responded to all my pings. I quick-scanned the access point: $ nmap 192.168.0.1 Starting Nmap 5.00 ( http://nmap.org ) at 2012-12-11 01:08 ART Interesting ports on 192.168.0.1: Not shown: 999 closed ports PORT STATE SERVICE 80/tcp filtered http Nmap done: 1 IP address (1 host up) scanned in 6.73 seconds Look the state of the port 80: FILTERED. I'm pretty confused now. Any suggestion would be appreciated. Thanks in advance.

  Read the article

• TFS 2012 and MS SQL 2008r2

  - by Vadim911

  When I try to call TFS 2012 warehouse control web service (WarehouseControlService.asmx) I got following error: Exception Message: Could not load file or assembly 'Microsoft.AnalysisServices, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (type FileNotFoundException) Exception Stack Trace:    at Microsoft.TeamFoundation.Warehouse.WarehouseConfigurationService.RebuildOLAPDatabase(TeamFoundationRequestContext requestContext, String olapServerInstanceName, String databaseName, String warehouseServerInstanceName, String warehouseDatabaseName, Int32 translationLCID, Boolean checkAndUpdateJobs)    at Microsoft.TeamFoundation.Warehouse.WarehouseConfigurationService.RebuildOLAPDatabase(TeamFoundationRequestContext requestContext, String olapServerInstanceName, String databaseName, String warehouseServerInstanceName, String warehouseDatabaseName, Int32 translationLCID)    at Microsoft.TeamFoundation.Management.SnapIn.ApplicationTierNode.RebuildReporting(IntPtr hwnd, IRefreshable panel) Inner Exception Details: Exception Message: Could not load file or assembly 'Microsoft.AnalysisServices, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (type FileNotFoundException) Exception Stack Trace:    at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)    at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)    at System.Reflection.Assembly.Load(AssemblyName assemblyRef)    at Microsoft.TeamFoundation.Common.Internal.TfsAssemblyResolver.OnAssemblyResolve(Object sender, ResolveEventArgs args)    at System.AppDomain.OnAssemblyResolveEvent(RuntimeAssembly assembly, String assemblyFullName) It is strange because I have installed ms sql connectivity. Is it issue connected with the fact that I try to use tfs 2012 with ms sql 2012? Please advise how to resolve issue networked above.

  Read the article

• Disabling Skype automatic update

  - by user13267

  How to stop skype from searching or at least downloading update without consent? I want that annoying "Update skype now" dialog box that keeps popping up before I log in to Skype and after I log in to Skype from appearing at all. Few months ago this used to work: 1) C:\Users\”YourName”\AppData\Local\Temp folder. 2) Find the file called SkypeSetup.exe, and delete it. 3) Create a text file in the folder, rename it to SkypeSetup.exe 4) Right click on the new file you just created and ask for properties. 5) Next left click the security tab then left click the advanced button. 6) Now left click “Change Permissions” and then “Add”. Enter “Everyone” (without the quotes) where it sez’, “Enter the object name to select (examples):” and click “OK”. 7) Now check the “Deny” box for “Full control” and click “OK”. obtained from HERE, but now it seems this has stopped working. The worst part is Skype seems to download ~30MB of executable setup file without my knowledge before bugging me with the dialog box to update it, and there seems to be no direct way to disable this download. And disabling the skype updater service does not seem to work either. Is there any kind of patch or registry hack I can use to stop skype from auto updating? Or should I start looking for an alternative to Skype altogether?

  Read the article

• Can you configure multiple KMS hosts in a primary / secondary relationship?

  - by Mark Hall

  We have two datacenters in our environment: primary and DR. I need to deploy a KMS service, and to be proactive, I would like to have a host in both datacenters. From what I have read, you can have up to 6 hosts without calling Microsoft, and it appears that what will happen is that a SRV record for each host will be placed in DNS. The client will query for those SRV records and randomly choose a host for the initial activation and will use that same server for all renewals. The server can be changed manually through a script and will automatically change if the initial server is unavailable when activating or renewing. My question is has anyone found a way to designate one server as the primary KMS host and designate the other as failover only? The reason I ask is that it is preferred that the client communicate with the primary datacenter during normal operations and only talk to the DR datacenter when needed because the bandwidth between the offices and the DR datacenter is limited compared to the primary. I am sure that this has been done before but I can not find it MSFT's documentation. Thanks, Mark

  Read the article

• ssh key questions

  - by Tim

  I have some questions regarding generating keys for ssh access: (1) Supposed there are two computers running ssh server service and I have generated a pair of key files on computer A and copy the public file to computer B. Is it true that this is only a one-way key: We only gave computer A permission to access computer B, not gave computer B permission to access computer A? If I now want to ssh from computer B to computer A, must I generat another pair of key files on computer B and copy the public file to computer A? (2) If I would like to connect a single local computer to several remote servers, is it to generate a common pair of key files only once on the local and copy the same public file to the remote servers, or to generate different pair of key files on the local for different remote servers? (3) If I would like to connect several local computers to a single remote server, when copying the public files from different local computers to the remote server, is it to combine them together into a single authorized_keys file or store them in different authorized_keys files? (4) If there are several servers shared the same file system by, for example, NFS, how to generate keys and arrange the key files for accessing from one server to the other? Also how to still generate keys and arrange the key files for a local computer to access anyone of the servers? All the machines above are Linux.Please provide examples and commands in your reply so that I can better understand how to solve the problems. Thanks and regards!

  Read the article

• SQL Full-Text indexing not populating

  - by Sam

  Hi, We installed a clustered SQL 2005 installation on windows 2008 and reattached our san drives from another machine and restored to do a migration to new hardware. There have been a few minor issues, but this one has me stuck. Trying to populate Full-Text indexes is not working. I create a basic table with some simple text in a new database and get the same results as old indexes. 2010-09-27 10:30:46.85 spid19s Informational: Full-text Full population initialized for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'). Population sub-tasks: 1. 2010-09-27 10:31:15.36 spid19s Error '0x80070003' occurred during full-text index population for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'), full-text key value 0x000001DF. Attempt will be made to reindex it. 2010-09-27 10:31:15.37 spid19s The component 'MSFTE.DLL' reported error while indexing. Component path 'D:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\MSFTE.DLL'. 2010-09-27 10:31:15.37 spid19s Error '0x80070003' occurred during full-text index population for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'), full-text key value 0x000001E0. Attempt will be made to reindex it. The rebuild/repopulate procedure finishes, but I get zero rows in the index. The .dll in the message is present and the service accounts have access to this. My FTData also has data in it, so it seems there wouldn't be permission issue on this folder. Application throws this error: “PHP Warning: mssql_query() [function.mssql-query]: message: Full-text catalog 'ikm_PageIndex_FText' is in an unusable state. Drop and re-create this full-text catalog. (severity 16) in E:\Inetpub\knowledgebase_insidemesa\lib\database\mssql.php on line 154” A microsoft discussion is the only post I found which had claimed to fix this - said it was registry related, but then didn't post the fix.

  Read the article

< Previous Page | 782 783 784 785 786 787 788 789 790 791 792 793  | Next Page >