Search Results

Search found 21524 results on 861 pages for 'multiple matches'.

Page 788/861 | < Previous Page | 784 785 786 787 788 789 790 791 792 793 794 795  | Next Page >

  • #altnetseattle &ndash; REST Services

    - by GeekAgilistMercenary
    Below are the notes I made in the REST Architecture Session I helped kick off with Andrew. RSS, ATOM, and such needed for better discovery.  i.e. there still is a need for some type of discovery. Difficult is modeling behaviors in a RESTful way.  ??  Invoking some type of state against an object.  For instance in the case of a POST vs. a GET.  The GET is easy, comes back as is, but what about a POST, which often changes some state or something. Challenge is doing multiple workflows with stateful workflows.  How does batch work.  Maybe model the batch as a resource. Frameworks aren’t particularly part of REST, REST is REST.  But point argued that REST is modeled, or part of modeling a state machine of some sort… ? Nothing is 100% reliable w/ REST – comparisons drawn with TCP/IP.  Sufficient probability is made however for the communications, but the idea of a possible failure has to be built into the usage model of REST. Ruby on Rails / RESTfully, and others used.  What were their issues, what do they do.  ATOM feeds, object serialized, using LINQ to XML w/ this.  No state machine libraries. Idempotent areas around REST and single change POST changes are inherent in the architecture. REST – one of the constrained languages is for the interaction w/ the system.  Limiting what can be done on the resources.  - disagreement, there is no agreed upon REST verbs. Sam Ruby – RESTful services.  Expanded the verbs within REST/HTTP pushes you off the web.  Of the existing verbs POST leaves the most up for debate. Robert Reem used Factory to deal with the POST to handle the new state.  The POST identifying what it just did by the return. Different states are put into POST, so that new prospective verbs, without creating verbs for REST/HTTP can be used to advantage without breaking universal clients. Biggest issue with REST services is their lack of state, yet it is also one of their biggest strengths.  What happens is that the client takes up the often onerous task of handling all state, state machines, and other extraneous resource management.  All the GETs, POSTs, DELETEs, INSERTs get all pushed into abstraction.  My 2 cents is that this in a way ends up pushing a huge proprietary burden onto the REST services often removing the point of REST to be simple and to the point. WADL does provide discovery and some state control (sort of?) Statement made, "WADL" isn't needed.  The JSON, XML, or other client side returned data handles this. I then applied the law of 2 feet rule for myself and headed to finish up these notes, post to the Wiki, and figure out what I was going to do next.  For the original Wiki entry check it out here. I will be adding more to this post with a subsequent post.  Please do feel free to post your thoughts and ideas about this, as I am sure everyone in the session will have more for elaboration.

    Read the article

  • Thoughts on my new template language/HTML generator?

    - by Ralph
    I guess I should have pre-faced this with: Yes, I know there is no need for a new templating language, but I want to make a new one anyway, because I'm a fool. That aside, how can I improve my language: Let's start with an example: using "html5" using "extratags" html { head { title "Ordering Notice" jsinclude "jquery.js" } body { h1 "Ordering Notice" p "Dear @name," p "Thanks for placing your order with @company. It's scheduled to ship on {@ship_date|dateformat}." p "Here are the items you've ordered:" table { tr { th "name" th "price" } for(@item in @item_list) { tr { td @item.name td @item.price } } } if(@ordered_warranty) p "Your warranty information will be included in the packaging." p(class="footer") { "Sincerely," br @company } } } The "using" keyword indicates which tags to use. "html5" might include all the html5 standard tags, but your tags names wouldn't have to be based on their HTML counter-parts at all if you didn't want to. The "extratags" library for example might add an extra tag, called "jsinclude" which gets replaced with something like <script type="text/javascript" src="@content"></script> Tags can be optionally be followed by an opening brace. They will automatically be closed at the closing brace. If no brace is used, they will be closed after taking one element. Variables are prefixed with the @ symbol. They may be used inside double-quoted strings. I think I'll use single-quotes to indicate "no variable substitution" like PHP does. Filter functions can be applied to variables like @variable|filter. Arguments can be passed to the filter @variable|filter:@arg1,arg2="y" Attributes can be passed to tags by including them in (), like p(class="classname"). You will also be able to include partial templates like: for(@item in @item_list) include("item_partial", item=@item) Something like that I'm thinking. The first argument will be the name of the template file, and subsequent ones will be named arguments where @item gets the variable name "item" inside that template. I also want to have a collection version like RoR has, so you don't even have to write the loop. Thoughts on this and exact syntax would be helpful :) Some questions: Which symbol should I use to prefix variables? @ (like Razor), $ (like PHP), or something else? Should the @ symbol be necessary in "for" and "if" statements? It's kind of implied that those are variables. Tags and controls (like if,for) presently have the exact same syntax. Should I do something to differentiate the two? If so, what? This would make it more clear that the "tag" isn't behaving like just a normal tag that will get replaced with content, but controls the flow. Also, it would allow name-reuse. Do you like the attribute syntax? (round brackets) How should I do template inheritance/layouts? In Django, the first line of the file has to include the layout file, and then you delimit blocks of code which get stuffed into that layout. In CakePHP, it's kind of backwards, you specify the layout in the controller.view function, the layout gets a special $content_for_layout variable, and then the entire template gets stuffed into that, and you don't need to delimit any blocks of code. I guess Django's is a little more powerful because you can have multiple code blocks, but it makes your templates more verbose... trying to decide what approach to take Filtered variables inside quotes: "xxx {@var|filter} yyy" "xxx @{var|filter} yyy" "xxx @var|filter yyy" i.e, @ inside, @ outside, or no braces at all. I think no-braces might cause problems, especially when you try adding arguments, like @var|filter:arg="x", then the quotes would get confused. But perhaps a braceless version could work for when there are no quotes...? Still, which option for braces, first or second? I think the first one might be better because then we're consistent... the @ is always nudged up against the variable. I'll add more questions in a few minutes, once I get some feedback.

    Read the article

  • Sharing configuration settings between Windows Azure roles

    - by theo.spears
    If you are working on a medium-large Windows Azure project it's likely it will involve more than one role, for example separate web and worker roles. Unfortunately although all the windows azure configuration settings are stored in a single cscfg file, there is no way to share configuration settings between multiple roles. This means you have to duplicate common settings like connection strings across all your roles. There is an open Connect issue about this topic, but Microsoft have not said when they will fix it. In the mean time I've put together a dirty dirty hack cunning workaround that creates a fake role containing your shared configuration settings, and copies it to all roles as part of the build process. Here's how you set it up: 1. Download the zip file attached to this post, and unzip it into the folder containing your Azure project (not your solution folder). 2. Edit your csdef and cscfg files to include the placeholder project ServiceDefinition.csdef<?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="AzureSpendNotifier" http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition%22"http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WorkerRole name="GLOBAL"> <ConfigurationSettings> <Setting name="ExampleSetting" /> </ConfigurationSettings> </WorkerRole> <WorkerRole name="MyWorker"> <ConfigurationSettings> </ConfigurationSettings> </WorkerRole> <WebRole name="MyWeb"> <Sites> <Site name="Web"> <Bindings> <Binding name="WebEndpoint" endpointName="WebEndpoint" /> </Bindings> </Site> </Sites> <ConfigurationSettings> </ConfigurationSettings> </WebRole> </ServiceDefinition> ServiceConfiguration.cscfg<?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="AzureSpendNotifier" xmlns=http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration osFamily="1" osVersion="*"> <Role name="GLOBAL"> <ConfigurationSettings> <Setting name="ExampleSetting" value="Hello World" /> </ConfigurationSettings> <Instances count="1" /> </Role> <Role name="MyWorker"> <Instances count="1" /> <ConfigurationSettings> </ConfigurationSettings> </Role> <Role name="MyWeb"> <Instances count="1" /> <ConfigurationSettings> </ConfigurationSettings> </Role> </ServiceConfiguration> It is important that all your roles contain a ConfigurationSettings entry in both cscfg and csdef files, even if it's empty- otherwise the shared configuration settings will not be inserted. 3. Open your azure deployment (.ccproj) project in notepad, and add the highlighted line below: ... <Import Project="$(CloudExtensionsDir)Microsoft.CloudService.targets" /> <Import Project="globalsettings/globalsettings.targets" /> </Project> It is important you add this below the Microsoft.CloudService.targets import line, as it replaces some of the rules defined in that file. Visual studio will prompt you to reload the project, say yes. At this point you will have a new Azure role called 'GLOBAL' with settings you can edit through the visual studio properties panel as normal. This role will never be deployed, but any settings you add to it will be copied to all your other roles when deployed or tested locally within visual studio.

    Read the article

  • CodePlex Daily Summary for Wednesday, June 20, 2012

    CodePlex Daily Summary for Wednesday, June 20, 2012Popular ReleasesApex: Apex 1.4: Apex 1.4Apex 1.4 provides a framework for rapid MVVM development. Download Apex 1.4 to get the core binaries, Visual Studio Extensions, Project Templates, Samples and Documentation. The 1.4 Release provides a vast number of enhancements via the Apex Broker. The Apex Broker is an object that can be used to retrieve models, get the view for a view model and more, much like an IoC container. The new Zune Style application templates for WPF and Silverlight give a great starting point for makin...Auto Proxy Configuration: V 1.0: This tool consists of a windows application that allows you to define a proxy server for each DNSDomain and a windows service that matches the DNSDomain to the database and set the proxy accordingly.51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.6.11: One Click Install from NuGet Changes to Version 2.1.6.111. Altered the GetIsCrawler method in MobileCapabilities.cs to return null if no value for IsCrawler is provided. Previously the method returned false breaking values provided via the BrowserCap file. 2. Enhanced Xml/Reader.cs to reduce the number of byte objects created when decompressing zipped XML files. 3. Altered Location.cs GetUrl method to remove replacement string tags {0} from the new url if no values were found to replace them...NShader - HLSL - GLSL - CG - Shader Syntax Highlighter AddIn for Visual Studio: NShader 1.3 - VS2010 + VS2012: This is a small maintenance release to support new VS2012 as well as VS2010. This release is also fixing the issue The "Comment Selection" include the first line after the selection If the new NShader version doesn't highlight your shader, you can try to: Remove the registry entry: HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\11.0\FontAndColors\Cache Remove all lines using "fx" or "hlsl" in file C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\CommonExtensions\Micr...asp.net membership: v1.0 Membership Management: Abmemunit is a Membership Management Project where developer can use their learning purposes of various issues related to ASP.NET, MVC, ASP.NET membership, Entity Framework, Code First, Ajax, Unit Test, IOC Container, Repository, and Service etc. Though it is a very simple project and all of these topics are used in an easy manner gathering from various big projects, it can easily understand. User End Functional Specification The functionalities of this project are very simple and straight...JSON Toolkit: JSON Toolkit 4.0: Up to 2.5x performance improvement in stringify operations Up to 1.7x performance improvement in parse operations Improved error messages when parsing invalid JSON strings Extended support to .Net 2.0, .Net 3.5, .Net 4.0, Silverlight 4, Windows Phone, Windows 8 metro apps and Xbox JSON namespace changed to ComputerBeacon.Json namespaceXenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.8.0: System Requirements OS Windows 7 Windows Vista Windows Server 2008 Windows Server 2008 R2 Web Server Internet Information Service 7.0 or above .NET Framework .NET Framework 4.0 WCF Activation feature HTTP Activation Non-HTTP Activation for net.pipe/net.tcp WCF bindings ASP.NET MVC ASP.NET MVC 3.0 Database Microsoft SQL Server 2005 Microsoft SQL Server 2008 Microsoft SQL Server 2008 R2 Additional Deployment Configuration Started Windows Process Activation service Start...ASP.NET REST Services Framework: Release 1.3 - Standard version: The REST-services Framework v1.3 has important functional changes allowing to use complex data types as service call parameters. Such can be mapped to form or query string variables or the HTTP Message Body. This is especially useful when REST-style service URLs with POST or PUT HTTP method is used. Beginning from v1.1 the REST-services Framework is compatible with ASP.NET Routing model as well with CRUD (Create, Read, Update, and Delete) principle. These two are often important when buildin...NanoMVVM: a lightweight wpf MVVM framework: v0.10 stable beta: v0.10 Minor fixes to ui and code, added error example to async commands, separated project into various releases (mainly into logical wholes), removed expression blend satellite assembliesCrashReporter.NET : Exception reporting library for C# and VB.NET: CrashReporter.NET 1.1: Added screenshot support that takes screenshot of user's desktop on application crash and provides option to include screenshot with crash report. Added Windows version in crash reports. Added email field and exception type field in crash report dialog. Added exception type in crash reports. Added screenshot tab that shows crash screenshot.MFCMAPI: June 2012 Release: Build: 15.0.0.1034 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeMonoGame - Write Once, Play Everywhere: MonoGame 2.5.1: Release Notes The MonoGame team are pleased to announce that MonoGame v2.5.1 has been released. This release contains important bug fixes and minor updates. Recent additions include project templates for iOS and MacOS. The MonoDevelop.MonoGame AddIn also works on Linux. We have removed the dependency on the thirdparty GamePad library to allow MonoGame to be included in the debian/ubuntu repositories. There have been a major bug fix to ensure textures are disposed of correctly as well as some ...????: ????2.0.2: 1、???????????。 2、DJ???????10?,?????????10?。 3、??.NET 4.5(Windows 8)????????????。 4、???????????。 5、??????????????。 6、???Windows 8????。 7、?????2.0.1???????????????。 8、??DJ?????????。Azure Storage Explorer: Azure Storage Explorer 5 Preview 1 (6.17.2012): Azure Storage Explorer verison 5 is in development, and Preview 1 provides an early look at the new user interface and some of the new features. Here's what's new in v5 Preview 1: New UI, similar to the new Windows Azure HTML5 portal Support for configuring and viewing storage account logging Support for configuring and viewing storage account monitoring Uses the Windows Azure 1.7 SDK libraries Bug fixesCodename 'Chrometro': Developer Preview: Welcome to the Codename 'Chrometro' Developer Preview! This is the very first public preview of the app. Please note that this is a highly primitive build and the app is not even half of what it is meant to be. The Developer Preview sports the following: 1) An easy to use application setup. 2) The Assistant which simplifies your task of customization. 3) The partially complete Metro UI. 4) A variety of settings 5) A partially complete web browsing experience To get started, download the Ins...Cosmos (C# Open Source Managed Operating System): Release 92560: Prerequisites Visual Studio 2010 - Any version including Express. Express users must also install Visual Studio 2010 Integrated Shell runtime VMWare - Cosmos can run on real hardware as well as other virtualization environments but our default debug setup is configured for VMWare. VMWare Player (Free). or Workstation VMWare VIX API 1.11AutoUpdaterdotNET : Autoupdate for VB.NET and C# Developer: AutoUpdater.NET 1.1: Release Notes New feature added that allows user to select remind later interval.Microsoft SQL Server Product Samples: Database: AdventureWorks 2008 OLTP Script: Install AdventureWorks2008 OLTP database from script The AdventureWorks database can be created by running the instawdb.sql DDL script contained in the AdventureWorks 2008 OLTP Script.zip file. The instawdb.sql script depends on two path environment variables: SqlSamplesDatabasePath and SqlSamplesSourceDataPath. The SqlSamplesDatabasePath environment variable is set to the default Microsoft ® SQL Server 2008 path. You will need to change the SqlSamplesSourceDataPath environment variable to th...WipeTouch, a jQuery touch plugin: 1.2.0: Changes since 1.1.0: New: wipeMove event, triggered while moving the mouse/finger. New: added "source" to the result object. Bug fix: sometimes vertical wipe events would not trigger correctly. Bug fix: improved tapToClick handler. General code refactoring. Windows Phone 7 is not supported, yet! Its behaviour is completely broken and would require some special tricks to make it work. Maybe in the future...Phalanger - The PHP Language Compiler for the .NET Framework: 3.0.0.3026 (June 2012): Fixes: round( 0.0 ) local TimeZone name TimeZone search compiling multi-script-assemblies PhpString serialization DocDocument::loadHTMLFile() token_get_all() parse_url()New ProjectsAMPlebrot: Sample code for Microsoft AMP including a auto-zooming Mandlebrot set browser and various random number generator implementations.Aquasoft ISZR web services Proxy: Knihovna pro pripojení k Informacnímu Systému Základních Registru (ISZR).Article Authoring Add-in for Word (NLM JATS): Use Microsoft Word to create, edit, save, and upload journal articles in the NLM Journal Article Tag Suite (JATS) DTDBetter Calculator: Scientific calculator with support for user variables and full expression evaluation.Cosmos Image Converter (CIC) GUI: CIC Gui is a program developed for COSMOS (http://cosmos.codeplex.com/) that processes an image and creates code compatible with COSMOS for you.CSNN: ?????? ?????? ????????? ???????????? ???????????? ????????? ????, ??????????? ????????? ????????? ? ??????????? ???????? ?? ????????.Cuddy Chat Server Client: Small Chat Server & Client - basierend auf C# mit SocketsdemoASP: asp.net mvcEspera: Espera is a portable music player, specialized for partys. It is written in C# with WPF as frontend technology.ExamEvaluator: Utility to create excelspreadsheets that can be used to evaluate the results of an exam. (Dutch only for now)FTToolkit for WinRT: FTToolkit for WinRT is the Windows RT Version of FTToolkit. The framework is designed for using in Metro Style Apps on Windows 8HydroServer Lite: HydroServer Lite is a lightweight version of the CUAHSI HydroServer written in PHP. It can be run on any webhosting service that supports PHP and MySQL. ImmunityBusterWP7: We will let you know about this soon...JavaVM for small microcontrollers: uJavaVM is a Java virtual machine for small microcontrollers written in portable C. The project is organized to support multiple microcontroller platforms. Jaw-Breaker: Hello,JIMS: Jangids Inventory Management SystemLee's Simple HTA Template: A SIMPLE HTA that can be used in various scripts and OSD. Very Minimal, intended to be used a starting template.Log4netExtensions: Log4net extensions for none static classMedical information Management System: The Medical Information Management System (MIMS) is a comprehensive solution for the various stakeholders in Medical Industry in the Nigeria.Minimap XNA game component for TemporalWars Indie Game Engine: This Minimap XNA Component is designed to show unit movement, structures placed in the game world, and take direct orders (Windows Platform). MusicCreator: This is a program that make sounds. Just open a sound and add into the program. then press the record button and the sound will be recorded.Osnova CMS: Osnova CMS, content management frameworkPicBin: PicBin is like PasteBin only that it is for pics. The Project uses .NET 4.5, ASP.NET MVC 4 and HTML5.PowerShell scripts to enable and disable tracing for Microsoft Dynamics CRM 2011: These are PowerShell scripts (files). There are 2 scripts in the zip file "CRM2011EnableDisableTrace.zip".PrepareQuery for MVC: ??????????? ??? ASP.NET MVC. Central.Linq.Mvc ?????? ?????????? ??? Central.Linq, ??????? ????????? ??????????? ???????????? ??????? ?? ?????? ?? ??????.Proggy: This will be a code-driven CMS for .NET developers. If I ever get the time to finish it.QuickSL: SL????, ??:??????、??????。 ?UI???????Temporal-Wars XNA Indie Game Engine: Temporal Wars 3D Engine includes a full suite of WYSIWG tools designed for rapid creation of your game world. Created for myself (Ben), now available for FREE.VIPER: VIPER RuntimeWeibo API library: Sina Weibo API library is NOT based on OAuth, but it is much more powerful in operating weibo activities via program. Major usage: 1. Rebot 2. Archive content

    Read the article

  • Thoughts on C# Extension Methods

    - by Damon
    I'm not a huge fan of extension methods.  When they first came out, I remember seeing a method on an object that was fairly useful, but when I went to use it another piece of code that method wasn't available.  Turns out it was an extension method and I hadn't included the appropriate assembly and imports statement in my code to use it.  I remember being a bit confused at first about how the heck that could happen (hey, extension methods were new, cut me some slack) and it took a bit of time to track down exactly what it was that I needed to include to get that method back.  I just imagined a new developer trying to figure out why a method was missing and fruitlessly searching on MSDN for a method that didn't exist and it just didn't sit well with me. I am of the opinion that if you have an object, then you shouldn't have to include additional assemblies to get additional instance level methods out of that object.  That opinion applies to namespaces as well - I do not like it when the contents of a namespace are split out into multiple assemblies.  I prefer to have static utility classes instead of extension methods to keep things nicely packaged into a cohesive unit.  It also makes it abundantly clear where utility methods are used in code.  I will concede, however, that it can make code a bit more verbose and lengthy.  There is always a trade-off. Some people harp on extension methods because it breaks the tenants of object oriented development and allows you to add methods to sealed classes.  Whatever.  Extension methods are just utility methods that you can tack onto an object after the fact.  Extension methods do not give you any more access to an object than the developer of that object allows, so I say that those who cry OO foul on extension methods really don't have much of an argument on which to stand.  In fact, I have to concede that my dislike of them is really more about style than anything of great substance. One interesting thing that I found regarding extension methods is that you can call them on null objects. Take a look at this extension method: namespace ExtensionMethods {   public static class StringUtility   {     public static int WordCount(this string str)     {       if(str == null) return 0;       return str.Split(new char[] { ' ', '.', '?' },         StringSplitOptions.RemoveEmptyEntries).Length;     }   }   } Notice that the extension method checks to see if the incoming string parameter is null.  I was worried that the runtime would perform a check on the object instance to make sure it was not null before calling an extension method, but that is apparently not the case.  So, if you call the following code it runs just fine. string s = null; int words = s.WordCount(); I am a big fan of things working, but this seems to go against everything I've come to know about instance level methods.  However, an extension method is really a static method masquerading as an instance-level method, so I suppose it would be far more frustrating if it failed since there is really no reason it shouldn't succeed. Although I'm not a fan of extension methods, I will say that if you ever find yourself at an impasse with a die-hard fan of either the utility class or extension method approach, then there is a common ground.  Extension methods are defined in static classes, and you call them from those static classes as well as directly from the objects they extend.  So if you build your utility classes using extension methods, then you can have it your way and they can have it theirs. 

    Read the article

  • forEach and Facelets - a bugfarm just waiting for harvest

    - by Duncan Mills
    An issue that I've encountered before and saw again today seems worthy of a little write-up. It's all to do with a subtle yet highly important difference in behaviour between JSF 2 running with JSP and running on Facelets (.jsf pages). The incident I saw today can be seen as a report on the ADF EMG bugzilla (Issue 53) and in a blog posting by Ulrich Gerkmann-Bartels who reported the issue to the EMG. Ulrich's issue nicely shows how tricky this particular gochya can be. On the surface, the problem is squarely the fault of MDS but underneath MDS is, in fact, innocent. To summarize the problem in a simpler testcase than Ulrich's example, here's a simple fragment of code: <af:forEach var="item" items="#{itemList.items}"> <af:commandLink id="cl1" text="#{item.label}" action="#{item.doAction}"  partialSubmit="true"/> </af:forEach> Looks innocent enough right? We see a bunch of links printed out, great. The issue here though is the id attribute. Logically you can kind of see the problem. The forEach loop is creating (presumably) multiple instances of the commandLink, but only one id is specified - cl1. We know that IDs have to be unique within a JSF component tree, so that must be a bad thing?  The problem is that JSF under JSP implements some hacks when the component tree is generated to transparently fix this problem for you. Behind the scenes it ensures that each instance really does have a unique id. Really nice of it to do so, thank you very much. However, (you could see this coming), the same is not true when running with Facelets  (this is under 11.1.2.n)  in that case, what you put for the id is what you get, and JSF does not mess around in the background for you. So you end up with a component tree that contains duplicate ids which are only created at runtime.  So subtle chaos can ensue.  The symptoms are wide and varied, from something pretty obscure such as the combination Ulrich uncovered, to something as frustrating as your ActionListener just not being triggered. And yes I've wasted hours on just such an issue.  The Solution  Once you're aware of this one it's really simple to fix it, there are two options: Remove the id attribute on components that will cause some kind of submission within the forEach loop altogether and let JSF do the right thing in generating them. Then you'll be assured of uniqueness. Use the var attribute of the loop to generate a unique id for each child instance.  for example in the above case: <af:commandLink id="cl1_#{item.index}" ... />.  So one to watch out for in your upgrades to JSF 2 and one perhaps, for your coding standards today to prepare you for. For completeness, here's the reference to the underlying JSF issue that's at the heart of this: JAVASERVERFACES-1527

    Read the article

  • Workflow versioning

    - by Nitra
    I believe I have a fundamental misunderstanding when it comes to workflow engines which I would appreciate if you could help me sort out. I'm not sure if my misunderstanding is specific to the workflow engine I'm using, or if it's a general misunderstanding. I happen to use Windows Workflow Foundation (WWF). TLDR-version WWF allows you to implement business processes in long-running workflows (think months or even years). When started, the workflows can't be changed. But what business process can't change at any time? And if a business process changes, wouldn't you want your software to reflect this change for already started 'instances' of the business process? What am I missing? Background In WWF you define a workflow by combining a set of activites. There are different types of activities - some of them are for flow control, such as the IfElseActivity and the WhileActivty while others allows you to perform actual tasks, such as the CodeActivity wich allows you to run .NET code and the InvokeWebServiceActivity which allows you to call web services. The activites are combined to a workflow using a visual designer. You pretty much drag-and-drop activities from a toolbox to a designer area and connect the activites to each other. The workflow and activities have input paramters, output parameters and variables. We have a single workflow which sometimes runs in a matter of a few days, but it may run for 5-6 months. WWF takes care of persisting the workflow state (what activity are we currently executing, what are the variable values and so on). So far I think WWF makes sense. Some people will prefer to implement a software representation of a business process using a visual designer over writing all of it in code. So what's the issue then? What I don't really get is the following: WWF is designed to take care of long-running workflows. But at the same time, WWF has no built-in functionality which allows you to modify the running workflows. So if you model a business process using a workflow and run that for 6 months, you better hope that the business process does not change. Because if it do, you'll have to have multiple versions of the workflow executing at the same time. This seems like a fundamental design mistake to me, but at the same time it seems more likely that I've misunderstood something. For us, this has had some real-world effects: We release new versions every month, but some workflows may run for a year. This means that we have several versions of the workflow running in parallell, in other words several versions of the business logics. This is the same as having many differnt versions of your code running in production in the same system at the same time, which becomes a bit hard to understand for users. (depending on on whether they clicked a 'Start' button 9 or 10 months ago, the software will behave differently) Our workflow refers to different types of entities and since WWF now has persisted and serialized these we can't really refactor the entities since then existing workflows can't be resumed (deserialization will fail We've received some suggestions on how to handle this When we create a new version of the workflow, cancel all running workflows and create new ones. But in our workflows there's a lot of manual work involved and if we start from scratch a lot of people has to re-do their work. Track what has been done in the workflow and when you create a new one skip activites which have already been executed. I feel that this alternative may work for simple workflows, but it becomes hairy to automatically figure out what activities to skip if there's major refactoring done to a workflow. When we create a new version of the workflow, upgrade old versions using the new WWF 4.5 functionality for upgrading workflows. But then we would have to skip using the visual designer and write code to inject activities in the right places in the workflow. According to MSDN, this upgrade functionality is only intended for minor bug fixes and not larger changes. What am I missing?

    Read the article

  • Mass Metadata Updates with Folders

    - by Kyle Hatlestad
    With the release of WebCenter Content PS5, a new folder architecture called 'Framework Folders' was introduced.  This is meant to replace the folder architecture of 'Folders_g'.  While the concepts of a folder structure and access to those folders through Desktop Integration Suite remain the same, the underlying architecture of the component has been completely rewritten.  One of the main goals of the new folders is to scale better at large volumes and remove the limitations of 1000 content items or sub-folders within a folder.  Along with the new architecture, it has a new look and a few additional features have been added.  One of those features are Query Folders.  These are folders that are populated simply by a query rather then literally putting items within the folders.  This is something that the Library has provided, but it always took an administrator to define them through the Web Layout Editor.  Now users can quickly define query folders anywhere within the standard folder hierarchy.   Within this new Framework Folders is the very handy ability to do metadata updates.  It's similar to the Propagate feature in Folders_g, but there are some key differences that make this very flexible and much more powerful. It's used within regular folders and Query Folders.  So the content you're updating doesn't all have to be in the same folder...or a folder at all.   The user decides what metadata to propagate.  In Folders_g, the system administrator controls which fields will be propagated using a single administration page.  In Framework Folders, the user decides at that time which fields they want to update. You set the value you want on the propagation screen.  In Folders_g, it used the metadata defined on the parent folder to propagate.  With Framework Folders, you supply the new metadata value when you select the fields you want to update.  It does not have to be defined on the parent folder. Because of these differences, I think the new propagate method is much more useful.  Instead of always having to rely on Archiver or a custom spreadsheet, you can quickly do mass metadata updates right within folders.   Here are the basic steps to perform propagation. First create a folder for the propagation.  You can use a regular folder, but a Query Folder will work as well. Go into the folder to get the results.   In the Edit menu, select 'Propagate'. Select the check-box next to the field to update and enter the new value  Click the Propagate button. Once complete, a dialog will appear showing it is complete What's also nice is that the process happens asynchronously in the background which means you can browse to other pages and do other things while it is still working.  You aren't stuck on the page waiting for it to complete.  In addition, you can add a configuration flag to the server to turn on a status indicator icon.  Set 'FldEnableInProcessIndicator=1' and it will show a working icon as its doing the propagation. There is a caveat when using the propagation on a Query Folder.   While a propagation on a regular folder will update all of the items within that folder, a Query Folder propagation will only update the first 50 items.  So you may need to run it multiple times depending on the size...and have the query exclude the items as they get updated. One extra note...Framework Folders is offered as the default folder architecture in the PS5 release of WebCenter Content.  But if you are using WebCenter Content integrated with another product that makes use of folders (WebCenter Portal/Spaces, Fusion Applications, Primavera, etc), you'll need to continue using Folders_g until they are updated to use the new folders.

    Read the article

  • CodePlex Daily Summary for Saturday, September 22, 2012

    CodePlex Daily Summary for Saturday, September 22, 2012Popular ReleasesWPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.8: Version: 2.5.0.8 (Milestone 8): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Mark the class DataModel as serializable. InfoMan: Minor improvements. InfoMan: Add unit tests for all modules. Othe...LogicCircuit: LogicCircuit 2.12.9.20: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionToolbars on text note dialog are more flexible now. You can select font face, size, color, and background of text you are typing. RAM now can be initialized to one of the following: random va...$linq - A Javascript LINQ library: Version 1.1: Version 1.1 Implemented batch, equiZip, zipLongest, prepend, pad, padWith, toJQuery, pipe, singleOrFallback, indexOf, indexOfElement, lastIndexOf, lastIndexOfElement, scan, prescan, and aggregate operators.Huo Chess: Huo Chess 0.95: The Huo Chess 0.95 version has an improved chessboard analysis function so as to be able to see which squares are the dangerous squares in the chessboard. This allows the computer to understand better when it is threatened. Two editions are included: Huo Chess 0.95 Console Application (57 KB in size) Huo Chess 0.95 Windows Application with GUI (119 KB in size) See http://harmoniaphilosophica.wordpress.com/2011/09/28/how-to-develop-a-chess-program-for-2jszrulazj6wq-23/ for the infamous How...Symphony Framework: Symphony Framework v2.0.0.2: Symphony Framework version 2.0.0.2. General note: If you install Symphony Framework 2.0.0.2 you must also install CodeGen 4.1.10 because a number of templates now utilise new features added to the tool. Added the user token PROJECTNAMESPACE to the “Symphony_Content.tpl” template to ensure that we can correctly reference the collection classes of the selection lists. Also added the ability to create object references to fields defined as having selection windows assigned. This enhancement ...Community xPress MDS: Initial MDS and DQS Models: Initial MDS & DQS ModelsSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.1.2020.421): New features: Disable a specific part of SiteMap to keep the data without displaying them in the CRM application. It simply comments XML part of the sitemap (thanks to rboyers for this feature request) Right click an item and click on "Disable" to disable it Items disabled are greyed and a suffix "- disabled" is added Right click an item and click on "Enable" to enable it Refresh list of web resources in the web resources pickerAJAX Control Toolkit: September 2012 Release: AJAX Control Toolkit Release Notes - September 2012 Release Version 60919September 2012 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - The current version of the AJAX Control Toolkit is not compatible with ...Lib.Web.Mvc & Yet another developer blog: Lib.Web.Mvc 6.1.0: Lib.Web.Mvc is a library which contains some helper classes for ASP.NET MVC such as strongly typed jqGrid helper, XSL transformation HtmlHelper/ActionResult, FileResult with range request support, custom attributes and more. Release contains: Lib.Web.Mvc.dll with xml documentation file Standalone documentation in chm file and change log Library source code Sample application for strongly typed jqGrid helper is available here. Sample application for XSL transformation HtmlHelper/ActionRe...Sense/Net CMS - Enterprise Content Management: SenseNet 6.1.2 Community Edition: Sense/Net 6.1.2 Community EditionMain new featuresOur current release brings a lot of bugfixes, including the resolution of js/css editing cache issues, xlsx file handling from Office, expense claim demo workspace fixes and much more. Besides fixes 6.1.2 introduces workflow start options and other minor features like a reusable Reject client button for approval scenarios and resource editor enhancements. We have also fixed an issue with our install package to bring you a flawless installation...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...Python Tools for Visual Studio: 1.5 RC: PTVS 1.5RC Available! We’re pleased to announce the release of Python Tools for Visual Studio 1.5 RC. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, etc. support. The primary new feature for the 1.5 release is Django including Azure support! The http://www.djangoproject.com is a pop...Launchbar: Lanchbar 4.0.0: This application requires .NET 4.5 which you can find here: www.microsoft.com/visualstudio/downloadsAssaultCube Reloaded: 2.5.4 -: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: New logo Improved airstrike! Reset nukes...Extended WPF Toolkit: Extended WPF Toolkit - 1.7.0: Want an easier way to install the Extended WPF Toolkit?The Extended WPF Toolkit is available on Nuget. What's new in the 1.7.0 Release?New controls Zoombox Pie New features / bug fixes PropertyGrid.ShowTitle property added to allow showing/hiding the PropertyGrid title. Modifications to the PropertyGrid.EditorDefinitions collection will now automatically be applied to the PropertyGrid. Modifications to the PropertyGrid.PropertyDefinitions collection will now be reflected automaticaly...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2 For detailed release notes check the release notes. JayData core: all async operations now support promises JayDa...????????API for .Net SDK: SDK for .Net ??? Release 4: 2012?9?17??? ?????,???????????????。 ?????Release 3??????,???????,???,??? ??????????????????SDK,????????。 ??,??????? That's all.VidCoder: 1.4.0 Beta: First Beta release! Catches up to HandBrake nightlies with SVN 4937. Added PGS (Blu-ray) subtitle support. Additional framerates available: 30, 50, 59.94, 60 Additional sample rates available: 8, 11.025, 12 and 16 kHz Additional higher bitrates available for audio. Same as Source Constant Framerate available. Added Apple TV 3 preset. Added new Bob deinterlacing option. Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will keep running and continue pro...DNN Metro7 style Skin package: Metro7 style Skin for DotNetNuke 06.02.01: Stabilization release fixed this issues: Links not worked on FF, Chrome and Safari Modified packaging with own manifest file for install and source package. Moved the user Image on the Login to the left side. Moved h2 font-size to 24px. Note : This release Comes w/o source package about we still work an a solution. Who Needs the Visual Studio source files please go to source and download it from there. Known 16 CSS issues that related to the skin.css. All others are DNN default o...Visual Studio Icon Patcher: Version 1.5.1: This fixes a bug in the 1.5 release where it would crash when no language packs were installed for VS2010.New ProjectsCodePlexDeployment: Please ignore, this project is for testing out some features of the WAWS deployment integrationDotNetNuke Social Dashboard: The DotNetNuke Social Dashboard gives DotNetNuke Administrators and insight into the social statistics of their site.EESTEC LC Trieste: .Event Log Mailer: Mails events from Windows' system Event Log which matches rules in configuration. Runs as Windows service and has super simple configurationflx4432: Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam facilisis condimentum nulla. Duis sed quam vitae nunc semper facilisis a eget leo.lanWOLf: Send wake-on-lan packets across subnets by utilizing powered-on machines on each subnet.Micro-Apps Framework: Micro-Apps is a revolutionary piece of software that allows you to have multiple programs running from 1 file under the same process!NJ: NJ Language Learning Helper type Config() = // Just Code Example member x.GetAll() = seq{ yield {Name="Admin" Dictionary = OtfPG: To generate reproducible complex passwords from simple pass phrases, allowing the user to 'remember; a simple phrase, rather that a complex password, without evProject92104: as ppProject92105: ppaProject92107: papaPython intellisense Enhancer: For the python code, the intellisense box will show after you input a character, just like c#.QR Code Reader (By Screen Capture): Reads the QR Codes displayed in webpages. (You need to capture the code area) Displays the code information.scenariov1706jabbr: helloSharePoint 2013 REST Test Web Part: A simple web part (placed in a farm solution) that helps SharePoint developers to test every HTTP call to the new REST interface of SharePoint 2013.SharePoint Resources Updater (2010 /2013): Project for SharePoint 2010/2013 IT pro's and dev's to adress App_GlobalResources difficulties when developping SharePoint solutions(or maintaining large farms)Word CustomXML data services: Services to add,change and read metadata embedded into a Word document. Metadata are stored in a custom XML file into the Word document. ??????: ge ren xiang mu

    Read the article

  • Is there a good [and modern] reason to not have static HTML pages with AJAX content , rather than generate pages?

    - by user1725
    Assumptions: We don't care about IE6, and Noscript users. Lets pretend we have the following design concept: All your pages are HTML/CSS that create the ascetics, layout, colours, general design related things. Lets pretend this basic code below is that: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html> <head> <link href="/example.css" rel="stylesheet" type="text/css"/> <script src="example.js" type="text/javascript"></script> <head> <body> <div class="left"> </div> <div class="mid"> </div> <div class="right"> </div> </body> </html> Which in theory should produce, with the right CSS, three vertical columns on the web page. Now, here's the root of the question, what are the serious advantages and/or disadvantages of loading the content of these columns (lets assume they are all indeed dynamic content, not static) via AJAX requests, or have the content pre-set with a scripting language? So for instance, we would have, in the AJAX example, lets asume jquery is used on-load: //Multiple http requests $("body > div.left").load("./script.php?content=news"); $("body > div.right").load("./script.php?content=blogs"); $("body > div.mid").load("./script.php?content=links"); OR--- //Single http request $.ajax({ url: './script.php?content=news|blogs|links', method: 'json', type: 'text', success: function (data) { $("body > div.left").html(data.news); $("body > div.right").html(data.blogs); $("body > div.mid").html(data.links); } }) Verses doing this: <body> <div class="left"> <?php echo function_returning_news(); ?> </div> <div class="mid"> <?php echo function_returning_blogs(); ?> </div> <div class="right"> <?php echo function_returning_links(); ?> </div> </body> I'm personally thinking right now that doing static HTML pages is a better method, my reasoning is: I've separated my data, logic, and presentation (ie, "MVC") code. I can make changes to one without others. Browser caches mean I'm just getting server load mostly for the content, not the presentation wrapped around it. I could turn my "script.php" into a more robust API for the website. But I'm not certain or clear that these are legitimately good reasons, and I'm not confidently aware of other issues that could happen, so I would like to know the pros-and-cons, so to speak.

    Read the article

  • Should I break contract early?

    - by cbang
    About 7 months ago I made the switch from a 5 year permie role (as a support developer in C#) to a contract role. I did this because I was stagnating in my old role. The extra cash contracting is really helping too. Unfortunately my team leader has taken a dislike to me from day 1. He regularly tells me I went out contracting too early, and frequently remarks that people in their 20's have no idea what they are talking about (I am 29). I was recently given the task of configuring our reports via our in house reporting library. It works off of a database driven criteria base, with controls being loaded as needed. The configs can get fairly complex, with controls having various levels of dependency on each other. I had a short time frame to get 50 reports working, and I was told to just get the basic configuration done, after which they will be handed over to the reporting team for fine tuning, then the test team. Our updated system was deployed 2 weeks ago, and it turned out that about 15 reports had issues causing incorrect data to be returned. Upon investigation I discovered that the reporting team hadn't even looked at them, and the test team hadn't bothered to test the reports. In spite of this, my team leader has told me that it is 100% my fault. As a result, our help desk got hit hard. I worked back until 2am that night to fix the highest priority issues (on my wedding anniversary!). The next day I arrive at work at 7:45 am to continue with the fixes. I got no thanks, but keep getting repeatedly told by my manager that "I fucked up" and "this is all my fault". I told my team leader I would spend part of my weekend working to fix the remaining issues. His response was "so you fucking should! you fucked it all up!" in front of the rest of the team. I responded "No worries." and left. I spent a decent chunk of my weekend working on it. Within 2 business days of finding out about the issues, I had all the medium and high priority issues fixed. The only comments my team leader has made to me in the last 2 weeks is to tell me how I have caused a big mess, and to tell me it was all my fault. I get this multiple times a day. If I make any jokes to anyone else in the team, I get told not to be a smartass... even though the rest of the team jokes throughout the day. Apart from that, all I get is angry looks any time I am anywhere near the guy. I don't give any response other than "alright" or silence when he starts giving me a hard time. Today we found out that the pilot release for the next stage has been pushed back. My team leader has said this was caused by me (but the higher ups said no such thing). He also said I have "no understanding of the ramifications of my actions". My question is, should I break contract (I am contracted until June 30) and find another role? No one else in my team will speak up in my favour, as they are contractors too and have no interest in rocking the boat. I could complain to my team leaders boss, but I can't see that helping, as I will still be stuck in the same team. As this is my first contract, I imagine getting the next one will be hard without a reference. I can't figure out if this guy is trying to get me fired up to provoke a confrontation (the guy loves conflict), or if he is just venting anger, or what. Copping this blame day after day is really wearing me down and making me depressed... especially since I have a wife and kid to support).

    Read the article

  • ArchBeat Link-o-Rama for 2012-08-30

    - by Bob Rhubart
    Next Generation Mobile Clients for Oracle Applications & the role of Oracle Fusion Middleware | Manish Palaparthy Manish Palaparthy examines some of Oracle's mobile applications, and takes a look at the underlying technology. Master Data Management: A Foundation for Big Data Analysis | Manouj Tahiliani "Businesses that have embraced MDM to get a single, enriched and unified view of Master data by resolving semantic discrepancies and augmenting the explicit master data information from within the enterprise with implicit data from outside the enterprise like social profiles will have a leg up in embracing Big Data solutions. This is especially true for large and medium-sized businesses in industries like Retail, Communications, Financial Services, etc that would find it very challenging to get comprehensive analytical coverage and derive long-term success without resolving the limitations of the heterogeneous topology that leads to disparate, fragmented and incomplete master data." — Manouj Tahiliani Architect Day: Boston - Agenda Update Here's the latest updated information on the session schedule and content for Oracle Technology Network Architect Day in Boston, MA on September 12, 2012. Registration is open, but seating is limited. OTN Architect Day: Boston is being held on Wednesday September 12, 2012, 8:00 a.m. – 5:00 p.m., at the Boston Marriott Burlington, One Burlington Mall Road, Burlington, MA 01803. Integrating Coherence & Java EE 6 Applications using ActiveCache | Ricardo Ferreira The seamless integration between Oracle Coherence and Oracle WebLogic Server "provides a comprehensive environment to develop applications without the complexity of extra Java code to manage cache as a dependency," explains Ricardo Ferreira, "since Oracle provides a DI (Dependency Injection) mechanism for Coherence, the same DI mechanism available in standard Java EE applications. This feature is called ActiveCache." Ricardo shows you how to configure ActiveCache in WebLogic and your Java EE application. Cloud Infrastructure has a new standard from the DMTF "Unlike a de facto standard where typically one vendor has change control over the interface, and everyone else has to reverse engineer the inner workings of it, [Cloud Infrastructure Management Interface (CIMI)] is a de jure standard that is under change control of a standards body. One reason the standard took two years to create is that we factored in use cases, requirements and contributed APIs from multiple vendors. These vendors have products shipping today and as a result CIMI has a strong foundation in real world experience." Oracle GoldenGate 11g Release Launch Webcast- September 12 The new release of Oracle GoldenGate 11g is now available for major databases and platforms. Register for this webcast and live Q&A with product experts to learn about the solution's new features. September 12, 2012. 8:00am AM and 10:00AM PT. Speakers: Doug Reid (Director, Product Management, Oracle GoldenGate), Irem Radzik (Director, Product Marketing, Oracle Data Integration Products) Thought for the Day "[When] asking skilled architects…what they do when confronted with highly complex problems… [they] would most likely answer, 'Just use Common Sense.' [A] better expression than 'common sense' is 'contextual sense'—a knowledge of what is reasonable within a given context. Practicing architects through eduction, experience and examples accumulate a considerable body of contextual sense by the time they're entrusted with solving a system-level problem…" — Eberhardt Rechtin (January 16, 1926 – April 14, 2006) Source: SoftwareQuotes.com

    Read the article

  • How does interpolation actually work to smooth out an object's movement?

    - by user22241
    I've asked a few similar questions over the past 8 months or so with no real joy, so I am going make the question more general. I have an Android game which is OpenGL ES 2.0. within it I have the following Game Loop: My loop works on a fixed time step principle (dt = 1 / ticksPerSecond) loops=0; while(System.currentTimeMillis() > nextGameTick && loops < maxFrameskip){ updateLogic(dt); nextGameTick+=skipTicks; timeCorrection += (1000d/ticksPerSecond) % 1; nextGameTick+=timeCorrection; timeCorrection %=1; loops++; } render(); My intergration works like this: sprite.posX+=sprite.xVel*dt; sprite.posXDrawAt=sprite.posX*width; Now, everything works pretty much as I would like. I can specify that I would like an object to move across a certain distance (screen width say) in 2.5 seconds and it will do just that. Also because of the frame skipping that I allow in my game loop, I can do this on pretty much any device and it will always take 2.5 seconds. Problem However, the problem is that when a render frame skips, the graphic stutter. It's extremely annoying. If I remove the ability to skip frames, then everything is smooth as you like, but will run at different speeds on different devices. So it's not an option. I'm still not sure why the frame skips, but I would like to point out that this is Nothing to do with poor performance, I've taken the code right back to 1 tiny sprite and no logic (apart from the logic required to move the sprite) and I still get skipped frames. And this is on a Google Nexus 10 tablet (and as mentioned above, I need frame skipping to keep the speed consistent across devices anyway). So, the only other option I have is to use interpolation (or extrapolation), I've read every article there is out there but none have really helped me to understand how it works and all of my attempted implementations have failed. Using one method I was able to get things moving smoothly but it was unworkable because it messed up my collision. I can foresee the same issue with any similar method because the interpolation is passed to (and acted upon within) the rendering method - at render time. So if Collision corrects position (character now standing right next to wall), then the renderer can alter it's position and draw it in the wall. So I'm really confused. People have said that you should never alter an object's position from within the rendering method, but all of the examples online show this. So I'm asking for a push in the right direction, please do not link to the popular game loop articles (deWitters, Fix your timestep, etc) as I've read these multiple times. I'm not asking anyone to write my code for me. Just explain please in simple terms how Interpolation actually works with some examples. I will then go and try to integrate any ideas into my code and will ask more specific questions if need-be further down the line. (I'm sure this is a problem many people struggle with).

    Read the article

  • SQL Azure: Notes on Building a Shard Technology

    - by Herve Roggero
    In Chapter 10 of the book on SQL Azure (http://www.apress.com/book/view/9781430229612) I am co-authoring, I am digging deeper in what it takes to write a Shard. It's actually a pretty cool exercise, and I wanted to share some thoughts on how I am designing the technology. A Shard is a technology that spreads the load of database requests over multiple databases, as transparently as possible. The type of shard I am building is called a Vertical Partition Shard  (VPS). A VPS is a mechanism by which the data is stored in one or more databases behind the scenes, but your code has no idea at design time which data is in which database. It's like having a mini cloud for records instead of services. Imagine you have three SQL Azure databases that have the same schema (DB1, DB2 and DB3), you would like to issue a SELECT * FROM Users on all three databases, concatenate the results into a single resultset, and order by last name. Imagine you want to ensure your code doesn't need to change if you add a new database to the shard (DB4). Now imagine that you want to make sure all three databases are queried at the same time, in a multi-threaded manner so your code doesn't have to wait for three database calls sequentially. Then, imagine you would like to obtain a breadcrumb (in the form of a new, virtual column) that gives you a hint as to which database a record came from, so that you could update it if needed. Now imagine all that is done through the standard SqlClient library... and you have the Shard I am currently building. Here are some lessons learned and techniques I am using with this shard: Parellel Processing: Querying databases in parallel is not too hard using the Task Parallel Library; all you need is to lock your resources when needed Deleting/Updating Data: That's not too bad either as long as you have a breadcrumb. However it becomes more difficult if you need to update a single record and you don't know in which database it is. Inserting Data: I am using a round-robin approach in which each new insert request is directed to the next database in the shard. Not sure how to deal with Bulk Loads just yet... Shard Databases:  I use a static collection of SqlConnection objects which needs to be loaded once; from there on all the Shard commands use this collection Extension Methods: In order to make it look like the Shard commands are part of the SqlClient class I use extension methods. For example I added ExecuteShardQuery and ExecuteShardNonQuery methods to SqlClient. Exceptions: Capturing exceptions in a multi-threaded code is interesting... but I kept it simple for now. I am using the ConcurrentQueue to store my exceptions. Database GUID: Every database in the shard is given a GUID, which is calculated based on the connection string's values. DataTable. The Shard methods return a DataTable object which can be bound to objects.  I will be sharing the code soon as an open-source project in CodePlex. Please stay tuned on twitter to know when it will be available (@hroggero). Or check www.bluesyntax.net for updates on the shard. Thanks!

    Read the article

  • Multitenant Design for SQL Azure: White Paper Available

    - by Herve Roggero
    Cloud computing is about scaling out all your application tiers, from web application to the database layer. In fact, the whole promise of Azure is to pay for just what you need. You need more IIS servers? No problemo... just spin another web server. You expect to double your storage needs for Azure Tables? No problemo; you are covered there too... just pay for your storage needs. But what about the database tier, SQL Azure? How do you add new databases easily, and transparently, so that your application simply uses more of SQL Azure if its needs to? Without changing a single line of code? And what if you need to scale back down? Welcome to the world of database scalability. There are many terms that describe database scalability, including data federation, multitenant designs, and even NoSQL depending on the technical solution you are implementing.  Because SQL Azure is a transactional database system, NoSQL is not really an option. However data federation and multitenant designs offer some very interesting scalability options that are worth considering. Data federation, a feature of SQL Azure that will be offered in the future, offers very interesting capabilities available natively on the SQL Azure platform. More to come in a few weeks... Multitenant designs on the other hand are design practices and technologies designed to help you reach flexible scalability options not available otherwise. The first incarnation of such a method was made available on CodePlex as an open source project (http://enzosqlshard.codeplex.com).  This project was an attempt to provide a sharding library for educational purposes.  All that sounds really cool... and really esoteric... almost a form of database "voodoo"... However after being on multiple Azure projects I am starting to see a real need. Customers want to be able to free themselves from the database tier, so that if they have 10 new customers tomorrow, all they need to do is add 2 more SQL Azure instances. It's that simple. How you achieve this, and suggested application design guidelines, are available in a white paper I just published.  The white paper offers two primary sections. The first section describes the business and technical problem at hand, and how to classify it according to specific design patterns. For example, I discuss compressed shards through schema separation. The second section offers a method for addressing the needs of a multitenant design using a new library, the big bother of the codeplex project mentioned previously (that I created earlier this year), complete with management interface and such. A Beta of this platform will be made available within weeks; as soon as the documentation will be ready.   I would like to ask you to drop me a quick email at [email protected] if you are going to download the white paper. It's not required, but it would help me get in touch with you for feedback.  You can download this white paper here:   http://www.bluesyntax.net/files/EnzoFramework.pdf . Thank you, and I am looking for feedback, thoughts and implementation opportunities.

    Read the article

  • WebLogic Server–Use the Execution Context ID in Applications–Lessons From Hansel and Gretel

    - by james.bayer
    I learned a neat trick this week.  Don’t let your breadcrumbs go to waste like Hansel and Gretel did!  Keep track of the code path, logs and errors for each request as they flow through the system.  Earlier this week an OTN forum post in the WLS – General category by Oracle Ace John Stegeman asked a question how to retrieve the Execution Context ID so that it could be used on an error page that a user could provide to a help desk or use to check with application administrators so they could look up what went wrong.  What is the Execution Context ID (ECID)?  Fusion Middleware injects an ECID as a request enters the system and it says with the request as it flows from Oracle HTTP Server to Oracle Web Cache to multiple WebLogic Servers to the Oracle Database. It’s a way to uniquely identify a request across tiers.  According to the documentation it’s: The value of the ECID is a unique identifier that can be used to correlate individual events as being part of the same request execution flow. For example, events that are identified as being related to a particular request typically have the same ECID value.  The format of the ECID string itself is determined by an internal mechanism that is subject to change; therefore, you should not have or place any dependencies on that format. The novel idea that I see John had was to extend this concept beyond the diagnostic information that is captured by Fusion Middleware.  Why not also use this identifier in your logs and errors so you can correlate even more information together!  Your logging might already identify the user, so why not identify the request so you filter down even more.  All you need to do inside of WebLogic Server to get ahold of this information is invoke DiagnosticConextHelper: weblogic.diagnostics.context.DiagnosticContextHelper.getContextId() This class has other helpful methods to see other values tracked by the diagnostics framework too.  This way I can see even more detail and get information across tiers. In performance profiling, this can be very handy to track down where time is being spent in code.  I’ve blogged and made videos about this before.  JRockit Flight Recorder can use the WLDF Diagnostic Volume in WLS 10.3.3+ to automatically capture and correlate lots of helpful information for each request without installing any special agents and with the out-of-the-box JRockit and WLS settings!  You can see here how information is displayed in JRockit Flight Recorder about a single request as it calls a Servlet, which calls an EJB, which gets a DB connection, which starts a transaction, etc.  You can get timings around everything and even see the SQL that is used. http://download.oracle.com/docs/cd/E21764_01/web.1111/e13714/using_flightrecorder.htm#WLDFC480 Recent versions of the WLS console also are able to visualize this data too, so it works with other JVMs besides JRockit when you turn on WLDF instrumentation. I wrote a little sample application that verified to myself that the ECID did actually cross JVM boundaries.  I invoked a Servlet in one JVM, which acted as an EJB client to Stateless Session Bean running in another JVM.  Each call returned the same ECID.  You need to turn on WLDF Instrumentation for this to work otherwise the framework returns null.  I’m glad John put me on to this API as I have some interesting ideas on how to correlate some information together.

    Read the article

  • New features in TFS Demo Setup 1.0.0.2

    - by Tarun Arora
    Release Notes – http://tfsdemosetup.codeplex.com/ | Download | Source Code | Report a Bug | Ideas Just pushed out the 2nd release of the TFS Demo setup on CodePlex, below a quick look at some of the new features/improvements in the tool… Details of the existing features can be found here. Feature 1 – Set up Work Items Queries as Team Favorites The task board looks cooler when the team favourite work item queries show up on the task board. The demo setup console application now has the ability to set up the work item queries as team favorites for you. If you want to see how you can add Team Favorites programmatically, refer to this blogpost here. Image 1 – Task board without Team Favorites Let’s see how the TFS Demo Setup application sets-up team favorites as part of the run… Open up the DemoDictionary.xml and you should be able to see the new node <TeamFavorites> this accepts multiple <TeamFavorite>. You simply need to specify the <Type> as Query and in the <Name> specify the name of the work item query that you would like added as a favorite. Image 2 – Highlighting the TeamFavorites block in DemoDictionary.xml So, when the demo set up application is run with the above config, work item queries “Blocked Tasks” and “Open Impediments” are added as team favorites. They then show up on the task board, as highlighted in the screen shot below. Image 3 – Team Favorites setup during the TFS demo setup app execution Feature 2 – Choose what you want to setup and exclude the rest I had a great feature request come in requesting the ability to exclude parts of the setup at the sole discretion of the executioner. To accommodate this, I have added an attribute with each block, the attribute “Run” accepts “true” or “false”. If you set the flag to true then at the time of execution that block would be considered for setup and if you set the flag to false, the block will be ignored during the setup. So, lets look at an example below… The attribute "Run” is set to true for TeamSettings, Team Favorites, TeamMembers and WorkItems. So, all of these would be setup as part of the demo setup application execution. Image 4 – New Attribute Run added to all blocks in DemoDictionary.xml If I did not want to recreate the team and did not want to add new work items but only wanted to add favorites and team members to the existing team “AgileChamps1” then I could simple run the application with below DemoDictionary.xml. Note – TeamSettings Run=”false” and WorkItems Run=”false”. Image 5 – TeamFavorites and TeamMembers set as true and others set to false Feature 3 – Usability Improvement If you try and assign a work item to a team member that does not exist then the application throws a nasty exception. This behaviour has now been changed, upon adding such a work item, the work items will be created and not assigned to any user. The work item id will be printed to the console making it simple for you to assign the work item manually. As you can see in the screen shot below, I am trying to assign the work item to a user “Tarun” and a user “v2” both are *not valid users in my team project collection* so the tool creates the work items and provides me the work item id and lets me know that since the user is invalid the work item could not be assigned to the user. Better user experience ae Image 6 – Behaviour if work item assigned to users are in valid users in team project That’s about it for the current release. I have some new features planned for the next release. Mean while if you have any ideas/comments please feel free to leave a comment. Stay tuned for more… Enjoy! Other posts on TFS Demo Setup can be found here.

    Read the article

  • EF4 Code First Control Unicode and Decimal Precision, Scale with Attributes

    - by Dane Morgridge
    There are several attributes available when using code first with the Entity Framework 4 CTP5 Code First option.  When working with strings you can use [MaxLength(length)] to control the length and [Required] will work on all properties.  But there are a few things missing. By default all string will be created using unicode so you will get nvarchar instead of varchar.  You can change this using the fluent API or you can create an attribute to make the change.  If you have a lot of properties, the attribute will be much easier and require less code. You will need to add two classes to your project to create the attribute itself: 1: public class UnicodeAttribute : Attribute 2: { 3: bool _isUnicode; 4:  5: public UnicodeAttribute(bool isUnicode) 6: { 7: _isUnicode = isUnicode; 8: } 9:  10: public bool IsUnicode { get { return _isUnicode; } } 11: } 12:  13: public class UnicodeAttributeConvention : AttributeConfigurationConvention<PropertyInfo, StringPropertyConfiguration, UnicodeAttribute> 14: { 15: public override void Apply(PropertyInfo memberInfo, StringPropertyConfiguration configuration, UnicodeAttribute attribute) 16: { 17: configuration.IsUnicode = attribute.IsUnicode; 18: } 19: } The UnicodeAttribue class gives you a [Unicode] attribute that you can use on your properties and the UnicodeAttributeConvention will tell EF how to handle the attribute. You will need to add a line to the OnModelCreating method inside your context for EF to recognize the attribute: 1: protected override void OnModelCreating(System.Data.Entity.ModelConfiguration.ModelBuilder modelBuilder) 2: { 3: modelBuilder.Conventions.Add(new UnicodeAttributeConvention()); 4: base.OnModelCreating(modelBuilder); 5: } Once you have this done, you can use the attribute in your classes to make sure that you get database types of varchar instead of nvarchar: 1: [Unicode(false)] 2: public string Name { get; set; }   Another option that is missing is the ability to set the precision and scale on a decimal.  By default decimals get created as (18,0).  If you need decimals to be something like (9,2) then you can once again use the fluent API or create a custom attribute.  As with the unicode attribute, you will need to add two classes to your project: 1: public class DecimalPrecisionAttribute : Attribute 2: { 3: int _precision; 4: private int _scale; 5:  6: public DecimalPrecisionAttribute(int precision, int scale) 7: { 8: _precision = precision; 9: _scale = scale; 10: } 11:  12: public int Precision { get { return _precision; } } 13: public int Scale { get { return _scale; } } 14: } 15:  16: public class DecimalPrecisionAttributeConvention : AttributeConfigurationConvention<PropertyInfo, DecimalPropertyConfiguration, DecimalPrecisionAttribute> 17: { 18: public override void Apply(PropertyInfo memberInfo, DecimalPropertyConfiguration configuration, DecimalPrecisionAttribute attribute) 19: { 20: configuration.Precision = Convert.ToByte(attribute.Precision); 21: configuration.Scale = Convert.ToByte(attribute.Scale); 22:  23: } 24: } Add your line to the OnModelCreating: 1: protected override void OnModelCreating(System.Data.Entity.ModelConfiguration.ModelBuilder modelBuilder) 2: { 3: modelBuilder.Conventions.Add(new UnicodeAttributeConvention()); 4: modelBuilder.Conventions.Add(new DecimalPrecisionAttributeConvention()); 5: base.OnModelCreating(modelBuilder); 6: } Now you can use the following on your properties: 1: [DecimalPrecision(9,2)] 2: public decimal Cost { get; set; } Both these options use the same concepts so if there are other attributes that you want to use, you can create them quite simply.  The key to it all is the PropertyConfiguration classes.   If there is a class for the datatype, then you should be able to write an attribute to set almost everything you need.  You could also create a single attribute to encapsulate all of the possible string combinations instead of having multiple attributes on each property. All in all, I am loving code first and having attributes to control database generation instead of using the fluent API is huge and saves me a great deal of time.

    Read the article

  • Tessellation Texture Coordinates

    - by Stuart Martin
    Firstly some info - I'm using DirectX 11 , C++ and I'm a fairly good programmer but new to tessellation and not a master graphics programmer. I'm currently implementing a tessellation system for a terrain model, but i have reached a snag. My current system produces a terrain model from a height map complete with multiple texture coordinates, normals, binormals and tangents for rendering. Now when i was using a simple vertex and pixel shader combination everything worked perfectly but since moving to include a hull and domain shader I'm slightly confused and getting strange results. My terrain is a high detail model but the textured results are very large patches of solid colour. My current setup passes the model data into the vertex shader then through the hull into the domain and then finally into the pixel shader for use in rendering. My only thought is that in my hull shader i pass the information into the domain shader per patch and this is producing the large areas of solid colour because each patch has identical information. Lighting and normal data are also slightly off but not as visibly as texturing. Below is a copy of my hull shader that does not work correctly because i think the way that i am passing the data through is incorrect. If anyone can help me out but suggesting an alternative way to get the required data into the pixel shader? or by showing me the correct way to handle the data in the hull shader id be very thankful! cbuffer TessellationBuffer { float tessellationAmount; float3 padding; }; struct HullInputType { float3 position : POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; float3 tangent : TANGENT; float3 binormal : BINORMAL; float2 tex2 : TEXCOORD1; }; struct ConstantOutputType { float edges[3] : SV_TessFactor; float inside : SV_InsideTessFactor; }; struct HullOutputType { float3 position : POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; float3 tangent : TANGENT; float3 binormal : BINORMAL; float2 tex2 : TEXCOORD1; float4 depthPosition : TEXCOORD2; }; ConstantOutputType ColorPatchConstantFunction(InputPatch<HullInputType, 3> inputPatch, uint patchId : SV_PrimitiveID) { ConstantOutputType output; output.edges[0] = tessellationAmount; output.edges[1] = tessellationAmount; output.edges[2] = tessellationAmount; output.inside = tessellationAmount; return output; } [domain("tri")] [partitioning("integer")] [outputtopology("triangle_cw")] [outputcontrolpoints(3)] [patchconstantfunc("ColorPatchConstantFunction")] HullOutputType ColorHullShader(InputPatch<HullInputType, 3> patch, uint pointId : SV_OutputControlPointID, uint patchId : SV_PrimitiveID) { HullOutputType output; output.position = patch[pointId].position; output.tex = patch[pointId].tex; output.tex2 = patch[pointId].tex2; output.normal = patch[pointId].normal; output.tangent = patch[pointId].tangent; output.binormal = patch[pointId].binormal; return output; } Edited to include the domain shader:- [domain("tri")] PixelInputType ColorDomainShader(ConstantOutputType input, float3 uvwCoord : SV_DomainLocation, const OutputPatch<HullOutputType, 3> patch) { float3 vertexPosition; PixelInputType output; // Determine the position of the new vertex. vertexPosition = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position; output.position = mul(float4(vertexPosition, 1.0f), worldMatrix); output.position = mul(output.position, viewMatrix); output.position = mul(output.position, projectionMatrix); output.depthPosition = output.position; output.tex = patch[0].tex; output.tex2 = patch[0].tex2; output.normal = patch[0].normal; output.tangent = patch[0].tangent; output.binormal = patch[0].binormal; return output; }

    Read the article

  • Tyrus 1.8

    - by Pavel Bucek
    Another version of Tyrus, the reference implementation of JSR 356 – Java API for WebSocket is out! Complete list of fixes and features is below, but let me describe some of the new features in more detail. All information presented here is also available in Tyrusdocumentation. What’s new? First to mention is that JSR 356 Maintenance review Ballot is over and the change proposed for 1.1 release was accepted. More details about changes in the API can be found in this article. Important part is that Tyrus 1.8 implements this API, meaning you can use Lambda expressions and some features of Nashorn without the need for any workarounds. Almost all other features are related to client side support, which was significantly improved in this release. Firstly – I have to admit, that Tyrus client contained security issue – SSL Hostname verification was not performed when connecting to “wss” endpoints. This was fixed as part of TYRUS-339 and resulted in some changes in the client configuration API. Now you can control whether HostnameVerification should be performed (SslEngineConfigurator#setHostnameVerificationEnabled(boolean)) or even set your own HostnameVerifier (please use carefully): #setHostnameVerifier(…). Detailed description can be found in Host verification chapter. Another related enhancement is support for Http Basic and Digest authentication schemes. Tyrus client now enables users to provide credentials and underlying implementation will take care of everything else. Our implementation is strictly non pre-emptive, so the login information is sent always as a response to 401 Http Status Code. If the Basic and Digest are not good enough and there is a need to use some custom scheme or something which is not yet supported in Tyrus, custom Authenticator can be registered and the authentication part of the handshake process will be handled by it. Please seeClient HTTP Authentication chapter in the user guide for more details. There are other features, like fine-grain threadpool configuration for JDK client container, build-in Http redirect support and some reshuffling related to unifying the location of client configuration classes and properties definition – every property should be now part of ClientProperties class. All new features are described in the user guide – in chapterTyrus proprietary configuration. Update – Tyrus 1.8.1 There was another slightly late reported issue related to running in environments with SecurityManager enabled, so this version fixes that. Another noteworthy fixes are TYRUS-355 and TYRUS-361; the first one is about incorrect thread factory used for shared container timeout, which resulted in JVM waiting for that thread and not exiting as it should. The other issue enables relative URIs in Location header when using redirect feature. Links Tyrus homepage mailing list JIRA Complete list of changes: Bug [TYRUS-333] – Multiple endpoints on one client [TYRUS-334] – When connection is closed by a peer, periodic heartbeat pong is not stopped [TYRUS-336] – ReaderBuffer.getNextChars() keeps blocking a server thread after client has closed the session [TYRUS-338] – JDK client SSL filter needs better synchronization during handshake phase [TYRUS-339] – SSL hostname verification is missing [TYRUS-340] – Test PathParamTest are not stable with JDK client [TYRUS-341] – A control frame inside a stream of continuation frames is treated as the part of the stream [TYRUS-343] – ControlFrameInDataStreamTest does not pass on GF [TYRUS-345] – NPE is thrown, when shared container timeout property in JDK client is not set [TYRUS-346] – IllegalStateException is thrown, when using proxy in JDK client [TYRUS-347] – Introduce better synchronization in JDK client thread pool [TYRUS-348] – When a client and server close connection simultaneously, JDK client throws NPE [TYRUS-356] – Tyrus cannot determine the connection port for a wss URL [TYRUS-357] – Exception thrown in MessageHandler#OnMessage is not caught in @OnError method [TYRUS-359] – Client based on Java 7 Asynchronous IO makes application unexitable Improvement [TYRUS-328] – JDK 1.7 AIO Client container – threads – (setting threadpool, limits, …) [TYRUS-332] – Consolidate shared client properties into one file. [TYRUS-337] – Create an SSL version of Basic Servlet test New Feature [TYRUS-228] – Add client support for HTTP Basic/Digest Task [TYRUS-330] – create/run tests/servlet/basic via wss [TYRUS-335] – [clustering] – introduce RemoteSession and expose them via separate method (not include remote sessions in the getOpenSessions()) [TYRUS-344] – Introduce Client support for HTTP Redirect

    Read the article

  • Wisdom Lies in Collaborative Power and Intelligence

    - by kellsey.ruppel
    By Alakh Verma, Director, Platform Technology Solutions   In my recent blog posts, I shared insights on Predictive Analytics (Will Predictive Analytics at 'Speed of Thoughts' Help Businesses?), Real Time Decisions (How critical are Real Time decisions in business today?) and their significance in our lives in general and in businesses today. In the current business paradigm shift- with evolutionary social business, it is paramount that businesses look for wisdom in collaborative power and intelligence and equip their employees with the tools to engage with one another. There is an old time saying that 5 sticks tied together are stronger and unable to break as opposed to an individual stick. We have recently witnessed the power of ordinary people uniting together and fought collaboratively using Facebook and Twitter to topple down dictators in Tunisia, Egypt and Libya—and are threatening absolute rule in Syria. And an India one man’s (Anna Hazare) campaign against corruption went viral, bringing thousands to the streets in support. As anyone who has worked in a sizeable organization knows, there is no guarantee that the organization as a whole will perform efficiently and achieve its goals, even if each employee is individually efficient and every team has a high level of productivity. To achieve enterprise productivity, it is necessary not only for individuals and groups to “do things right” by working productively but also for the enterprise as a whole to “do the right things” - form the right teams, make the right decisions, allocate resources correctly, and effectively coordinate activities across the entire organization. Most organizations fall short of the optimal level of enterprise productivity because of one or more of these reasons, all at a great cost to the business.  They are disconnected from themselves with various parts of the organization unintentionally working at cross-purposes with each other.  Information that exists is not getting shared or reused.  Human talent is not being applied where it is most needed.  The same problems are being solved repeatedly by multiple groups. Intelligent collaboration through automated business processes has the ability to alter the course of any important business activity, with a potentially dramatic impact on the financial performance of the business. Whether it is a simple email exchange, a physical or virtual meeting, a task force, or a large-scale project, the activity is inherently collaborative.  In fact, collaboration can be defined as the work that takes place among people when a business process is not pre-determining how the work should take place. Collaboration is many things: information sharing, brainstorming, problem solving, best practice negotiation, innovation, coordination of activity, alignment of purpose, and so forth.  Collaboration is the “white space” between the business processes; it is the glue that holds an organization together, and the lubricant that allows the machinery to keep running.  Real time search and collaborative capabilities of the right people with the right content supported by defined processes will provide unparallel wisdom in the organization in the most competitive business environment today. Interestingly, technologies such as Oracle WebCenter offer these capabilities in our Web based business transactions and compliment in the overall collaborative intelligence and power to truly transform organizations to social businesses. Looking to learn more about engaging your employees to collaborate together and providing a complete user experience for your customers? You won't want to miss our webcast today! Drive Online Engagement with Intuitive Portals and Websites

    Read the article

  • DISA Cross Domain Enterprise Solutions on the NetBeans Platform

    - by Geertjan
    Bray 2.0 is a tool based on the NetBeans Platform that assists in creating valid Data Flow Configuration (DFC) files. The DFC Specification was developed to provide a standardized way for defining, validating, and approving data flows for use on cross-domain guarding solutions. A DFC document specifies key entities such as security domains, guards that facilitate data between security domains, data flows that describe how data travels between security domains, filters that transform and validate the data and more. Related info: http://www.disa.mil/Services/Information-Assurance/Cross-Domain-Solutions The Bray product is in development at Fulcrum IT (http://www.fulcrumco.com). The DFC Specification and Bray were developed in support of the US Department of Defense. Bray 2.0 marks the first release of Bray on the NetBeans Platform and utilizes a number of features that are core to the NetBeans Platform: Modular plugability. Bray consumers can integrate their own tools, file types, and more into the product with relative ease. Robust UI. The NetBeans Platform intuitive UI makes it easy to access and manipulate multiple aspects of a DFC. Explorer. The Explorer is a key component that makes the DFC XML easy to traverse, edit, and find errors. Context-sensitive help. JavaHelp can be readily integrated for the product as well as all the UI within. Editors. Any external file can be added to a DFC. Users can register their own editors or use the provided NetBeans editors to edit files. Printing. The NetBeans Platform Print API makes it easy to determine what should be printed and how.   A screenshot: Bray 2.0 provides a lot of key features in developing valid, robust DFC files:  XML validation. A DFC can be validated against the DFC schema specification. DFC Check List. An interactive, minimal guide for creating a complete DFC. Summary Window. The Summary Window functions like the Navigator in NetBeans IDE. The current "item of interest" is checked against various business rules and provides the ability to quickly find and fix errors. Change Log. Bray audits every change to a DFC and places them in a change log for users to peruse. Comments. Users can optionally add comments for other users to see. Digital signatures. DFC files can be digitally signed. A signature history and signature validation is provided in Bray. Pluggable security schemes. Bray ships with plain text and IC-ISM security schemes. If needed, users can integrate additional ones.  ...and more to come! New features for Bray are constantly in development including use of the NetBeans Visual Library, language support, and more. More screenshots:

    Read the article

  • Systems of Engagement

    - by Michael Snow
    12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}  Engagement Week 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} This week we’ll be looking at the ever evolving topic of systems of engagement. This topic continues generating widespread discussion around how we connect with businesses, employers, governments, and extended social communities across multiple channels spanning web, mobile and human face to face contact. Earlier in our Social Business Thought Leader Webcast Series, we had AIIM President John Mancini presenting "Moving from Records to Engagement to Insight" discussing the factors that are driving organizations to think more strategically about the intersection of content management, social technologies, and business processes. John spoke about how Content Management and Enterprise IT are being changed by social technologies and how new technologies are being used to drive innovation and transform processes along and what the implications of this transformation are for information professionals. He used these two slides below to illustrate the evolution from Systems of Record to Systems of Engagement. The AIIM White Paper is available for download from the AIIM website. Later this week (09/20), we'll have another session in our Social Business Thought Leader Webcast Series featuring  R “Ray” Wang (@rwang0) Principal Analyst & CEO from Constellation Research presenting: "Engaging Customers in the Era of Overexposure"  More info to come tomorrow on the upcoming webcast this week. ~~~~~~ In the spirit of spreading good karma - one of the first things that came to mind as I was thinking about "Engagement" was the evolution of the Marriage Proposal.  Someone sent me a link to this link a couple of months ago and it raises the bar on all proposals. I hope you'll enjoy!

    Read the article

  • Get Your Enterprise Working With Oracle On Track Communication 1.0

    - by Josh Lannin
    The On Track Development team is very pleased to announce that today On Track is available for our customers to download and evaluate.  To learn more about what On Track does start with our whitepaper and datasheet.   If you are a developer, take a look at our documentation and samples posted to our OTN page. For this first blog post, I’ll be speaking to several notable points about our product. Graceful Escalation via Conversations: On Track addresses the “Collaboration Problem” through a single guiding principle – graceful escalation – within the construct of a Conversation. In On Track, collaboration is based on a context (called a “Conversation”) that gracefully escalates in form, structure, and content, as dictated by the particular needs of a given collaboration.  Within that context, On Track provides a rich set of tools to choose from.  These tools provide for communication, coordination, content management, organization, decision making, and analysis -- all essential aspects of collaboration, but not all of them are essential all of the time.  Every collaborative interaction will evolve differently.  Some will evolve to represent work spreading over the course of years and involving a large, distributed team, while others may involve few people and not evolve at all.  Regardless, all collaborative contexts are built from the same parts, utilize the same concepts, and start the same way.  The principle of graceful escalation is that you only use the tools and structure you need; so you only incur the complexity you need. Purposeful Collaboration: Through application integration, On Track Conversations bring enterprise application users the communication and collaboration capabilities required to complete business process.  By association with specific processes or business objects conversations extend the possible interactions and broaden participation to internal or external non-application users and provide a sophisticated interaction experience, all the while enhancing the data set within the owning application.  Purposeful collaboration not only needs to happen in the context of applications, it must support a full range of real-time and long-running interactions to provide the greatest value. Multi Client, Multi Modal: This On Track 1.0 product release includes the same day availability of  multiple clients, including iPhone and iPad applications which are now available on the Apple Store, a fully capable and accessible Outlook Add-In, along with our browser web client.  With each client we have sought to leverage the strengths of each unique device- our iPhone client supports picture and voice posts, the iPad is optimized for meeting room situations and document viewing, and our Outlook add-in allows you to take emails in context and bring them into On Track.  In addition to supporting a diverse array of clients, On Track provides a unified multi modal experience support starting with basic messages moving through to integrated documents with live annotations, snapshots, application sharing, and voice. Next Generation Web Architecture: We believe On Track will help move the bar higher for what users can expect from all web applications, most notably ones that involve real-time activity.  On Track is built from the ground up with an innovative, real-time architecture that leverages the extensive push capabilities of our server.  Whether you are receiving a new message, viewing where crowds of people are collaborating, or doing live annotation on a document with a set of people, that information comes to you immediately without refreshes or moving back and forth between pages.  We’ve leveraged this core architecture across the product experience and raised the user experience bar for this type of application.  As well these capabilities are based on open standards and protocols, and are fully extensible by anyone- enabling sophisticated integrations to be created with a wide variety of both legacy and next-generation applications. Agile Product Development: As a product team we operate using continuous feedback and modified agile development methodologies.  We have thousands of active internal Oracle users who have helped pilot our product for critical business functions, and the On Track product development team uses our product as our primary vehicle for all our collaboration.  Additionally we been working with early access customers who are adopting our technology and providing us valuable feedback - which our process has rapidly realized in improvements to our software.  On Track agility extends to our server as well, which is built to scale, and is very simple to install and configure. We are pleased to make this product announcement and encourage you to join us on Facebook or follow us on Twitter, as well as checking back here for the latest product information.

    Read the article

  • Is It Worth It To Learn Experimental Languages

    - by Xander Lamkins
    I'm a young programmer who desires to work in the field someday as a programmer. I know Java, VB.NET and C#. I want to learn a new language (as I programmer, I know that it is valuable to extend what I know - to learn languages that make you think differently). I took a look online to see what languages were common. Everybody knows C and C++ (even those muggles who know so little about computers in general), so I thought, maybe I should push for C. C and C++ are nice but they are old. Things like Haskell and Forth (etc. etc. etc.) are old and have lost their popularity. I'm scared of learning C (or even C++) for this same reason. Java is pretty old as well and is slow because it's run by the JVM and not compiled to native code. I've been a Windows developer for quite a while. I recently started using Java - but only because it was more versatile and spreadable to other places. The problem is that it doesn't look like a very usable language for these reasons: It's most used purpose is for web application and cellphone apps (specifically Android) As far as actual products made with it, the only things that come to mind are Netbeans, Eclipse (hurrah for making and IDE with the language the IDE is for - it's like making a webpage for writing HTML/CSS/Javascript), and Minecraft which happens to be fun but laggy and bipolar as far as computer spec. support. Other than that it's used for servers but heck - I don't only want to make/configure servers. The .NET languages are nice, however: People laugh if I even mention VB.NET or C# in a serious conversation. It isn't cross-platform unless you use MONO (which is still in development and has some improvements to be made). Lacks low level stuff because, like Java with the JVM, it is run/managed by the CLR. My first thought was learning something like C and then using it to springboard into C++ (just to make sure I would have a strong understanding/base), but like I said earlier, it's getting older and older by the minute. What I've Looked Into Fantom looks nice. It's like a nice middleman between my two favorite languages and even lets me publish between the two interchangeably, but, unlike what I want, it compiles to the CLR or JVM (depending on what you publish it to) instead of it being a complete compile. D also looks nice. It seems like a very usable language and from multiple sources it appears to actually be better than C/C++. I would jump right with it, but I'm still unsure of its success because it obviously isn't very mainstream at this point. There are a couple others that looked pretty nice that focused on other things such as Opa with web development and Go by GOOGLE. My Question Is it worth learning these "experimental" languages? I've read other questions that say that if you aren't constantly learning languages and open to all languages that you aren't in the right mindset for programming. I understand this and I still might not quite be getting it, but in truth, if a language isn't going to become mainstream, should I spend my time learning something else? I don't want to learn old (or any going to soon be old) programming languages. I know that many people see this as something important, *but would any of you ever actually consider (assuming you didn't already know) FORTRAN? My goal is to stay current to make sure I'm successful in the future. Disclaimer Yes, I am a young programmer, so I probably made a lot of naive statements in my question. Feel free to correct me on ANYTHING! I have to start learning somewhere so I'm sure a lot of my knowledge is sketchy enough to have caused to incorrect statements or flaws in my thinking. Please leave any feelings you have in the comments.

    Read the article

< Previous Page | 784 785 786 787 788 789 790 791 792 793 794 795  | Next Page >