Search Results

Search found 2808 results on 113 pages for 'volume mixer'.

Page 79/113 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• I have a 21TB array but only 16TB is visible from Windows

  - by Relentim

  CONTROLLER Raid Controller: 3Ware 9650SE-24M8 Disks: 21 x 1TB RAID5 Stripe 64KB WINDOWS OS: Windows Server 2003 SP2 32x Disk: Dynamic 19557.44GB Volume: Capacity 15832.19GB I guess my array must have a 4KB block size which is limiting it to 16TB. I think I would have to switch to a 64KB block size to be able to see a maximum of 256TB. Or create another unit on my controller to go above 16TB of storage. Unfortunately I have already added over 16TB, ideally I would like to shrink the array and reclaim the 5 disks that aren't doing anything. I don't think this is possible. More likely, can I change the block size so 20TB becomes visible in windows?

  Read the article

• Best way to partition 1 TB (Linux and Windows 7)

  - by Simon

  Is there an intelligent way to partition 1 TB and be prepared for resizing/adding/deleting partitions? I was thinking about LVM, but as far as I remember, Windows 7 can't be installed on logical volume right? For now my plan is: - ~150 GB for Windows 7 and other stuff (Visual Studio..., maybe I'll split it 100/50 or something like that) - simple NTFS - 850 GB = LVM - disk for Linux (Ubuntu) and other stuff virtual machines, etc. I'm mostly interested in how and what tools should I use to get easy in maintain partitions for both systems.

  Read the article

• Systray stretching out for no reason.

  - by MrStatic

  I just restored my Windows install back to a previous state with Macrium. For some odd reason it is now stretching out my systray up to halfway across my taskbar. Any ideas why? No it did not do this 6 months ago when I took the image or anytime after that when I was using it. This is in Windows 7x64. The blank area seems to be filled with blank icons because if I place the mouse anywhere in the blank area the systray will slide over by about 1 icon's width. The missing icon between the battery and the volume is I assume my network icon. Not sure why that is missing as well.

  Read the article

• LVM vs RAID0 vs RAID "linear" - Combine 2 disks as one, data recovery?

  - by leto

  Hi there, given two 2TB USB external disks that have to be combined to one 4TB volume and formatted with one big Filesystem (XFS), I have a small question to ask. Does LVM provide better Data recovery, should one disk be unplugged/damaged by being able to recover the data of the still working disk or is everything lost? I would appreciate a solution where only the data of one disk is lost and I can recover the content of the other with the usual filesystem/lvm/raid tools. Is that possible with LVM or RAID "linear"? This is for storing unimportant files that can be retrieved from backup, but I want to save time :) Thank you in advance

  Read the article

• I have no sound in my Media players

  - by Lefteris Gkinis

  I have Windows Professional x64 with two sound cards. for many months these cards (and the all sound system) was working fine. Suddenly my System (my PC) stops having sound. from WINDOWS MEDIA PLAYERS and for any other media players The default sounds from windows are working fine but I don't have sounds from media players. Also I open the "Sounds And Audio Device Properties" and in "Volume"Tab I press "Advance". There I receive an error "DirectSoundSetting not available". I have already Uninstall and re install my sound cards... But Nothing. Did anyone knows where the problem is?

  Read the article

• Will 5 Terabyte NAS drive be compatible with Windows XP SP3 32 bit?

  - by TrevorBoydSmith

  (NOTE: The operating system (in this case Windows XP SP3 32 bit) we are using is not a choice.) I am trying to setup a short term storage device. First, I found a large 5 Terabyte NAS drive that would IMO fulfill my storage requirements. Second, I also found that Windows XP seems to have a hard drive size limit (see 'Is there a limit to the size of a hard drive for Windows XP pre-SP1?'): XP should handle up to 2 TB per volume after the service packs are applied. You are correct. There was a 137gb limit on the orginal pre service pack windows xp. This was addressed/fixed in SP1. My question is, will my Windows XP SP3 32 bit machine see the 5 Terabyte NAS and be able to read/write properly to the NAS drive?

  Read the article

• What's the best way to copy deduplicated files onto a new Server 2012 drive?

  - by Screndib

  We have a deduplicated volume on a Windows Server 2012 machine that is approaching it's limits. It is a 1.3TB drive with ~10TB of duplicated data. We want to copy all of this data onto a larger 4TB drive. What is the best way to perform this copy such that we only copy the 1.3TB of deduplicated data instead of unpacking the entire 10TB and repacking it on the other end? edit: I attempted a standard explorer file copy and a Copy-Item but neither appeared to be dedup-aware. I didn't run either to completion however so I can't say this is the case for sure.

  Read the article

• Windows 7 ISO not booting from DVD drive?

  - by chum of chance

  I've downloaded Windows 7 x64 Pro Upgrade from the volume license center. I've also downloaded the Windows 7 USB/DVD download tool. I'll burn it using this tool and while it will show up in Explorer as if the burn worked correctly, when I try to boot to the DVD on startup, I get a "No operating system found" error (this is a newer Lenovo). My Ubuntu Live CD works fine, am I missing something? I read that there's problems if you try to burn a 64bit copy from a 32bit computer, but I'm currently running Win7x64, so that shouldn't be a problem. I've also tried burning with ImgBurn and Windows 7 built ISO burner, no success. Obviously there's a step I'm missing here, what gives?

  Read the article

• LVM incorrectly reported missing after power failure

  - by mensi

  We have had a major power failure in the data-center. We are using a set of servers for our storage needs. The main server has several pairs of disks mirrored with mdadm. The resulting /dev/mdX are LVM physical volumes and belong to a big volume-group with all our data. After the powerloss, we had the problem that one of the mdadm devices was not auto-detected due to a missing entry in mdadm.conf. As a consequence, the volumegroup had inactive logical volumes due to the missing PV. We were able to fix the mdadm config and reboot. pvscan shows all expected PVs but one LV still does not come up. vgdisplay shows: [...] Cur PV: 3 Act PV: 2 [...] Neither vgscan nor pvscan show any missing devices. What went wrong? How can we force LVM to activate all PVs?

  Read the article

• How to recover the data from the crashed (external) hard disk drive (NTFS)?

  - by shveerab

  The 300 GB harddisk has 2 partitions,90 GB and 200 GB! I can see the drives in windows(XP) but unable to access them, the file system is shown as RAW, 0 used space and 0 free space!..chkdsk returns the error "unable to determine volume version and date. chkddsk aborted." Is the MBR corrupt? How do I restore it? TestDisk tool isn't recognizing the partitions and says invalid entry for heads/cylinder, 15 and should be 255 and suggests to change it..Should I go ahead and change it? Please advise!

  Read the article

• Shortcut with arguments in Debian

  - by Duncan

  I have a volume on a debian server which contains a large number of images at full resolution in various folders. What I'd like to do is have a separate sort of browse proxy folder which contains lower quality browse copies of these to enable users to access them for viewing over lower speed dial in accounts. I'd ideally like these to be created on the fly using ImageMagick so there isnt the need to store the large number of browse copies full time and worry about keeping them up to date etc The way I'd invisaged this happening is the browse proxy folder containing a duplicate file and folder structure but with symlinks pointing to a script to transform them with the file path as an argument. Except I know this isnt possible with symlinks so am wondering if there's another way of doing this on linux. On windows shortcuts can take arguments and I'm wondering how to do the same on a Linux platform? (or perhaps I'm going about this the wrong way?)

  Read the article

• Is there a way to watch EyeTV in alarm-clock style "sleep" mode on your iMac?

  - by Mark S.

  My wife likes to watch TV to go to sleep, the only trouble is that the only TV we have in our house is the iMac with the EyeTV Hybrid. I'd like to have the TV turn off after 1.5 hours of watching without changing the channels/volume--sortof like an alarm clock 'sleep' function. Do you know of a way to do this either with an EyeTV plugin or an App that might be able to try to detect such conditions and shut down the display? Right now EyeTV overrides the screensaver. The Power saver functions don't really work because she doesn't start watching at the same time every night and periodically she will want to record a 2 or 3 AM show. All I want to do is "close" (but not quit) EyeTV and shut off the display.

  Read the article

• What is the best file system to use for a second hard drive when dual booting between WinXP and Win7

  - by Corey

  I am dual booting for legacy reasons, and I have a 2nd internal drive that I would like to use from both XP and 7. Should I go with the standard NTFS? (will the secuirty features be an issue, with different SIDs from the different users) Should I go with FAT32? Should I try out the new exFAT? Also, I curently have two of my 3 drives as "dynamic disks" and 1 spaned volume created on them. (i did this from XP) Win7 can see them/it fine. Is this an ok thing to do?

  Read the article

• Can You Specify Where LVM Snapshots Are (Initially) Stored?

  - by bottles

  Disclaimer: this is my first time using lvm. Upon RTFM, it appears that LVM snapshots are automatically stored in the same directory as the original logical volume. In my case, that would mean the /dev directory. This isn't very nice, because there's not enough disk space in there for me to store a large snapshot. So when I run a command like lvcreate --size 1G --snapshot --name snapshot /dev/lvmData/usr, I need an additional 1G of space free in /dev? Is there any way to specify a different directory in which to store my snapshot?

  Read the article

• How Do I Migrate 100 DBs From One MS-SQL 2008 Server To Another? (looking for automation)

  - by jc4rp3nt3r

  Let me start by saying that I am not a DBA, but I am in a position where I am responsible for moving just under 100 MS-SQL 2008 DBs from our current development server, to a new/better/faster development server. As this is just a local dev server, temporary downtime is acceptable, but I am looking for a way to move all of the databases (preferably in bulk). I know that I could take a bak of each, and restore it on the new server, but given the volume of DBs, I am looking for a more efficient way. I am not opposed to learning a new piece of software, writing code or any other requirement, so long as it speeds up the process.

  Read the article

• Table Formatting in Word

  - by user359217

  I have a table in Word which is 5 columns wide and multiple rows. In Row 3, cells 1, 2, 3 & 5 have simple text. Cell 4 contains a large quantity of text and therefore needs to wrap over several pages. Therefore, I mark "Allow row to break across pages". Problem: on next page where row has wrapped, cells 1, 2, 3 & 5 are blank with cell 4 displaying the wrapped text. Is there any way that I can get the simple text from Row 3, cells 1, 2 and 3 to repeat on the pages which contain the wrapped text of cell 4? I do not want the data to be in the table heading, as I have multiple rows which have a similar volume of text.

  Read the article

• Missing Driver - Video Controller (VGA Compatible)

  - by arahant

  I have a HP 2000-2106TU Notebook PC running Windows XP. I want to get the brightness keys to work. They are placed over the F2 and F3 buttons and are meant to be used in conjunction with the Fn key. But these combinations do not work, though other Fn keys such as the volume control keys do. I see a missing driver for a device called Video Controller (VGA Compatible) in the Windows Device Manager. The hardware id is PCI VEN 8086 DEV 0106 SUBSYS_1858103C which a Google search suggests is in an Intel HD Graphics family, but I don't know where to locate the driver. HP's driver scan does not help, as it does not show any missing driver related to video/graphics. What can I do next?

  Read the article

• Xubuntu 12.04: Slow Login

  - by naxchange

  I'm running Xubuntu 12.04, and after I ran the update, my login started slowing down big time. I've dabbled a little bit with the programs in Settings - Settings Manager - Session and Startup, and tried closing and opening these programs, and then rebooting. Anyways, I narrowed it down to a combination of 2 processes, "Network" (the connection manager) and "Xfce Volume Daemon". Their corresponding terminal commands are: ~$ nm-applet ~$ xfce4-volumed If I disable them, and then run them after login is complete, everything works just fine. Is there a way for me to run these commands automatically at start up? I want to maybe write a shell script and save it somewhere, or at least edit the order things happen after login, so the desktop can load before these processes. Hope I've been clear enough, and thanks in advance! NAX

  Read the article

• Mapping Ctrl+Arrow for Home/End/PageUp/Down

  - by user67275

  I'm using Windows 7 on Dell New Inspiron 14z Ultrabook. It doesn't have Home/End/PgUp/PgDn keys. Instead I have to use Fn + arrow keys. Can I re-map those to Ctrl + arrows or Alt + arrows or Shift + arrows? That way I could go one page up and down with only my right hands rather than with the left hand on the Fn key and right hand on arrow key. Also, volume up and down is assigned to FnF11 and FnF12. Can I re-map them to F11 and F12? Existing functions assigned to F11 and F12 will be replaced by FnF11 and FnF12. Is it possible?

  Read the article

• How to get audio driver for compaq c700 ?

  - by Leena

  Hi, Initially i have audio driver and its works fine.But some times speaker was clear.So one of my friend installed some audio driver,after that totally disabled the volume. For that reason, i also tried to get audio driver and installed many times.Now i don't know many drivers .inf in my laptop.from device manager i have deleted the audio driver's,below i have attached the screen shot yours kind reference. Please help me to get audio drivers.First, i need to remove the unwanted drivers .inf files from laptop then i have to install the new audio driver. Experts,please suggest me to get audio driver without reinstall the OS. Details: Compaq c700 (i don't know model number) windows xp sp2 p/n : KT188PA#ACJ I appreciate your help.

  Read the article

• How to get audio driver for compaq c700 ?

  - by Leena

  Hi, Initially i have audio driver and its works fine.But some times speaker was clear.So one of my friend installed some audio driver,after that totally disabled the volume. For that reason, i also tried to get audio driver and installed many times.Now i don't know many drivers .inf in my laptop.from device manager i have deleted the audio driver's,below i have attached the screen shot yours kind reference. Please help me to get audio drivers.First, i need to remove the unwanted drivers .inf files from laptop then i have to install the new audio driver. Experts,please suggest me to get audio driver without reinstall the OS. Details: Compaq c700 (i don't know model number) windows xp sp2 p/n : KT188PA#ACJ I appreciate your help.

  Read the article

• Converted VmWare Image does not boot in Virtual Box

  - by vBox Question

  I have a .vddx virtual image which boots in VmWare, but I'm having trouble getting it to work with Sun Virtual Box. In Sun Virtual Box, I created a new Virtual Machine and pointed it at the vddx file from VmWare. When I try to boot the virtual machine, Sun Virtual Box says that the volume is not bootable. VmWare is able to boot from this virtual machine. Does anyone have any suggestions about what might be causing the problem? Is there a conversion utility that I need to run? Any debugging options that I could turn on?

  Read the article

• My microphone is too quiet

  - by AmitM9S6

  I've been chatting with skype for a long time.. and I don't know why, but for X time it's fine, and then it's too quiet.. Here how it goes : I'm booting the PC - getting into a skype call with friends - talking with friends on skype - (everything goes well) - Closing the skype call - Going back to a skype call like a hour after -. They can't hear me well, I have to shout so they'll hear me, and in the settings, it's on 100% + 30 DECIBELS, so I can't raise it higher... and if I'll re-boot my PC, it'll be well until I'll close the skype call again.. Every time I'm skyping with friends well, and then when I close the call and come back after a while, they hear me really low(volume).. I've been trying to fix this problem for about 2 months! If you'll be able to help me, I'd be so happy. (btw It's connected not through USB, but through a microphone connection and headphone connection...) Also, I got Windows 7..

  Read the article

• My microphone is too quiet (seems to be connected with Skype)

  - by AmitM9S6

  I've been chatting with skype for a long time.. and I don't know why, but for X time it's fine, and then it's too quiet.. Here how it goes : I'm booting the PC - getting into a skype call with friends - talking with friends on skype - (everything goes well) - Closing the skype call - Going back to a skype call like a hour after -. They can't hear me well, I have to shout so they'll hear me, and in the settings, it's on 100% + 30 DECIBELS, so I can't raise it higher... and if I'll re-boot my PC, it'll be well until I'll close the skype call again.. Every time I'm skyping with friends well, and then when I close the call and come back after a while, they hear me really low(volume).. I've been trying to fix this problem for about 2 months! If you'll be able to help me, I'd be so happy. (btw It's connected not through USB, but through a microphone connection and headphone connection...) Also, I got Windows 7..

  Read the article

• samsung netbook OS for clean install

  - by Alex

  Hello - I recently had a problem with a corrupted registry on a samsung N120. When all else failed i reformatted the drive. However having bought the machine with windows home ed pre-installed, I didn't have original windows disck for the clean install. So I managed to install another edition of windows XP (PRO this time). Now windows opens, but several key functions are missing. e.g.: screen resolution - will not allow me any but 800x600 resolution native buttons - such as the fn + screen brightness is not working at all. Any suggestions please? ? Is there a way to get the samsung OS online (since I do have the manufacturer's/installed product key)? thanks PS: It has been my intention to install ubuntu, but i need to know i will not lose functions like screen brightness, volume, and the trackpad's scrolling function. I'd be happy to bypass the windows option if i was sure to have full keyboard/samsung functionality

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >