Search Results

Search found 21963 results on 879 pages for 'lance may'.

Page 790/879 | < Previous Page | 786 787 788 789 790 791 792 793 794 795 796 797  | Next Page >

• SQL Saturday 43 in Redmond

  - by AjarnMark

  I attended my first SQLSaturday a couple of days ago, SQLSaturday #43 in Redmond (at Microsoft).  I got there really early, primarily because I forgot how fast I can get there from my home when nobody else is on the road.  On a weekday in rush hour traffic, that would have taken two hours to get there.  I gave myself 90 minutes, and actually got there in about 45.  Crazy! I made the mistake of going to the main Microsoft campus, but that’s not where the event was being held.  Instead it was in a big Microsoft conference center on the other side of the highway.  Fortunately, I had the address with me and quickly realized my mistake.  When I got back on track, I noticed that there were bright yellow signs out on the street corner that looked like they said they were for SOL Saturday, which actually was appropriate since it was the sunniest day around here in a long time. Since I was there so early, the registration was just getting setup, so I found Greg Larsen who was coordinating things and offered to help.  He put me to work with a group of people organizing the pre-printed raffle tickets and stuffing swag bags. I had never been to a SQLSaturday before this one, so I wasn’t exactly sure what to expect even though I have read about a few on some blogs.  It makes sense that each one will be a little bit different since they are almost completely volunteer driven, and the whole concept is still in its early stages.  I have been to the PASS Summit for the last several years, and was hoping for a smaller version of that.  Now, it’s not really fair to compare one free day of training run entirely by volunteers with a multi-day, $1,000+ event put on under the direction of a professional event management company.  But there are some parallels. At this SQLSaturday, there was no opening general session, just coffee and pastries in the common area / expo hallway and straight into the first group of sessions.  I don’t know if that was because there was no single room large enough to hold everyone, or for other reasons.  This worked out okay, but the organization guy in me would have preferred to have even a 15 minute welcome message from the organizers with a little overview of the day.  Even something as simple as, “Thanks to persons X, Y, and Z for helping put this together…Sessions will start in 20 minutes and are all in rooms down this hallway…the bathrooms are on the other side of the conference center…lunch today is pizza and we would like to thank sponsor Q for providing it.”  It doesn’t need to be much, certainly not a full-blown Keynote like at the PASS Summit, but something to use as a rallying point to pull everyone together and get the day off to an official start would be nice.  Again, there may have been logistical reasons why that was not feasible here.  I’m just putting out my thoughts for other SQLSaturday coordinators to consider. The event overall was great.  I believe that there were over 300 in attendance, and everything seemed to run smoothly.  At least from an attendee’s point of view where there was plenty of muffins in the morning and pizza in the afternoon, with plenty of pop to drink.  And hey, if you’ve got the food and drink covered, a lot of other stuff could go wrong and people will be very forgiving.  But as I said, everything appeared to run pretty smoothly, at least until Buck Woody showed up in his Oracle shirt.  Other than that, the volunteers did a great job! I was a little surprised by how few people in my own backyard that I know.  It makes sense if you really think about it, given how many companies must be using SQL Server around here.  I guess I just got spoiled coming into the PASS Summit with a few contacts that I already knew would be there.  Perhaps I have been spending too much time with too few people at the Summits and I need to step out and meet more folks.  Of course, it also is different since the Summit is the big national event and a number of the folks I know are spread out across the country, so the Summit is the only time we’re all in the same place at the same time.  I did make a few new contacts at SQLSaturday, and bumped into a couple of people that I knew (and a couple others that I only knew from Twitter, and didn’t even realize that they were here in the area). Other than the sheer entertainment value of Buck Woody’s session, the one that was probably the greatest value for me was a quick introduction to PowerShell.  I have not done anything with it yet, but I think it will be a good tool to use to implement my plans for automated database recovery testing.  I saw just enough at the session to take away some of the intimidation factor, and I am getting ready to jump in and see what I can put together in the next few weeks.  And that right there made the investment worthwhile.  So I encourage you, if you have the opportunity to go to a SQLSaturday event near you, go for it!

  Read the article

• Profit's COLLABORATE 10 Session Selections

  - by Aaron Lazenby

  COLLABORATE 2010 is a mere 11 days away (thanks for the reminder @ocp_advisor). Every year I publish my a list of the sessions I think reflect some of the more interesting people/trends in enterprise IT. I should be at all of these sessions, so drop by for a chat--I'll be the guy tapping out emails on my iPad... Monday, April 19 9:15 a.m. - Keynote: Transforming Customer Value, Delivering Highest Customer Service Location: Keynote Hall I never miss Charles Phillips when he speaks--it's one of the best opportunities to get an update on Oracle product developments and strategy. And there's certainly occasion for an update: this will be Phillips' first big presentation since the Oracle + Sun Strategy Update in late January. Phillips is appearing with Oracle Executive Vice President of Development Thomas Kurian which means there should be some excellent information about how customers are using Oracle's complete software and hardware stack to address enterprise IT challenges. The session should provide some excellent context for the rest of the week's session...don't miss it. 10:45 a.m. - Oracle Fusion Applications: Functional Overview Location: South Seas FI met Basheer Khan at COLLABORATE 08 in Denver and have followed his work ever since. He's a former member of the OAUG Board of Directors, an Oracle ACE, and a charismatic enterprise IT expert. Having worked with the Oracle Usability Advisory Board, Basheer should have some fascinating insights to share about the features and interface of Oracle's Fusine Applications. This session, along with Nadia Bendjedou's "10 Things You Can Do Today to Prepare for the Next Generation Applications" (on Tuesday, April 20 8:00 a.m. in room 3662) should give attendees the update they need about Oracle's next-generation applications.   1:15p.m. - E-Business Suite in the Amazon Cloud Location: South Seas HI did my first full-fledged cloud computing coverage at last year's COLLABORATE show (check out my interview with Oracle's Bill Hodak), where I first learned about Amazon's EC2 offering. I've since talked with several people who have provisioned server space on Amazon's cloud with great results. So I'm looking forward to watching the audience configure an instance of the Oracle E-Business Suite release 12 on the cloud while Chuck Edwards from Blue Gecko drives. This session should take some of the mist and vapor out of the cloud conversation.2:30 p.m. - "Zero Sign-on" to EBS - Enabling 96000 Users to Login to EBS Without User Maintenance Location: South Seas HI'll be sitting tight in South Seas H for the next session on Monday where Doug Pepka, a ten-year veteran of communications giant Comcast, will be walking attendees through a massive single sign-on (SSO) project across the enterprise. I'm working on a story about SSO for the August issue of Profit, so this session has real practical value to me. Plus the proliferation of user account logins--both personal and professional--makes this a critical usability/change management issue for IT leaders planning for successful long-term IT implementations.   Tuesday 8:00 am  - Information Architecture for Men in Kilts Location: SURF AGetting to a 8:00 a.m. presentation is a tall order in Las Vegas, but presenter Billy Cripe will make it worth your effort. Not only is the title of this session great, but the content should appeal to any IT strategist looking to push the limits of Web 2.0 technologies in the enterprise. Cripe is a product management director of Enterprise 2.0 and Enterprise Content Management at Oracle, author of Reshaping Your Business with Web 2.0, and a prolific blogger--he knows how information architecture is critical to and enterprise 2.0 implementation.    10:30a.m. - Oracle Virtualization: From Desktop to Data Center Location: REEF FData center virtualization is still one of the best ways to reduce the cost of running enterprise IT. With the addition of Sun products, Oracle has the industry's most comprehensive virtualization portfolio. I must admit, I'm no expert in this subject. So I'm looking forward to Monica Kumar's presentation so I can get up to speed.   Wednesday 8:00 a.m. - The Art of the Steal Location: Mandalay Bay Ballroom JMany will know Frank Abagnale from Steven Spielberg's 2002 film "Catch Me if You Can." The one-time con man and international fugitive who swindled $2.5 million in forged checks went on to help U.S. federal officials investigate fraud cases. Now the CEO of Abagnale and Associates, he has become an invaluable source to the business world on the subject of fraud and fraud protection. With identity theft and digital fraud still on the rise, this session should be an entertaining, and sobering, education on the threats facing businesses and customers around the world. A great way to start Wednesday.1:00 p.m. - Google Wave: Will it replace e-mail as we know it today? Location: SURF EBy many assessments (my own included), Google Wave is a bit of an open collaboration failure. It may seem like an odd reason for me to be excited about this session, but I'm looking forward to the chance to revisit the technology. Also, this is a great case study in connecting free, available Internet tools to existing enterprise computing environments--an issue that IT strategists must contend with as workers spreads out and choose their own productivity tools.  

  Read the article

• Check Your Spelling, Grammar, and Style in Firefox and Chrome

  - by Matthew Guay

  Are you tired of making simple writing mistakes that get past your browser’s spell-check?  Here’s how you can get advanced grammar check and more in Firefox and Chrome with After the Deadline. Microsoft Word has spoiled us with grammar, syntax, and spell checking, but the default spell check in Firefox and Chrome still only does basic checks.  Even webapps like Google Docs don’t check more than basic spelling errors.  However, WordPress.com is an exception; it offers advanced spelling, grammar, and syntax checking with its After the Deadline proofing system.  This helps you keep from making embarrassing mistakes on your blog posts, and now, thanks to a couple free browser plugins, it can help you keep from making these mistakes in any website or webapp. After the Deadline in Google Chrome Add the After the Deadline extension (link below) to Chrome as usual. As soon as it’s installed, you’re ready to start improving your online writing.  To check spelling, grammar, and more, click the ABC button that you’ll now see at the bottom of most text boxes online. After a quick scan, grammar mistakes are highlighted in green, complex expressions and other syntax problems are highlighted in blue, and spelling mistakes are highlighted in red as would be expected.  Click on an underlined word to choose one of its recommended changes or ignore the suggestion. Or, if you want more explanation about what was wrong with that word or phrase, click Explain for more info. And, if you forget to run an After the Deadline scan before submitting a text entry, it will automatically check to make sure you still want to submit it.  Click Cancel to go back and check your writing first.   To change the After the Deadline settings, click its icon in the toolbar and select View Options.  Additionally, if you want to disable it on the site you’re on, you can click Disable on this site directly from the popup. From the settings page, you can choose extra things to check for such as double negatives and redundant phrases, as well as add sites and words to ignore. After the Deadline in Firefox Add the After the Deadline add-on to Firefox (link below) as normal. After the Deadline basically the same in Firefox as it does in Chrome.  Select the ABC icon in the lower right corner of textboxes to check them for problems, and After the Deadline will underline the problems as it did in Chrome.  To view a suggested change in Firefox, right-click on the underlined word and select the recommended change or ignore the suggestion. And, if you forget to check, you’ll see a friendly reminder asking if you’re sure you want to submit your text like it is. You can access the After the Deadline settings in Firefox from the menu bar.  Click Tools, then select AtD Preferences.  In Firefox, the settings are in a options dialog with three tabs, but it includes the same options as the Chrome settings page.  Here you can make After the Deadline as correction-happy as you like.   Conclusion The web has increasingly become an interactive place, and seldom does a day go by that we aren’t entering text in forms and comments that may stay online forever.  Even our insignificant tweets are being archived in the Library of Congress.  After the Deadline can help you make sure that your permanent internet record is as grammatically correct as possible.  Even though it doesn’t catch every problem, and even misses some spelling mistakes, it’s still a great help. Links Download the After the Deadline extension for Google Chrome Download the After the Deadline add-on for Firefox Similar Articles Productive Geek Tips Quick Tip: Disable Favicons in FirefoxStupid Geek Tricks: Duplicate a Tab with a Shortcut Key in Chrome or FirefoxHow to Disable the New Geolocation Feature in Google ChromeStupid Geek Tricks: Compare Your Browser’s Memory Usage with Google ChromeStop YouTube Videos from Automatically Playing in Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools

  Read the article

• .NET Security Part 3

  - by Simon Cooper

  You write a security-related application that allows addins to be used. These addins (as dlls) can be downloaded from anywhere, and, if allowed to run full-trust, could open a security hole in your application. So you want to restrict what the addin dlls can do, using a sandboxed appdomain, as explained in my previous posts. But there needs to be an interaction between the code running in the sandbox and the code that created the sandbox, so the sandboxed code can control or react to things that happen in the controlling application. Sandboxed code needs to be able to call code outside the sandbox. Now, there are various methods of allowing cross-appdomain calls, the two main ones being .NET Remoting with MarshalByRefObject, and WCF named pipes. I’m not going to cover the details of setting up such mechanisms here, or which you should choose for your specific situation; there are plenty of blogs and tutorials covering such issues elsewhere. What I’m going to concentrate on here is the more general problem of running fully-trusted code within a sandbox, which is required in most methods of app-domain communication and control. Defining assemblies as fully-trusted In my last post, I mentioned that when you create a sandboxed appdomain, you can pass in a list of assembly strongnames that run as full-trust within the appdomain: // get the Assembly object for the assembly Assembly assemblyWithApi = ... // get the StrongName from the assembly's collection of evidence StrongName apiStrongName = assemblyWithApi.Evidence.GetHostEvidence<StrongName>(); // create the sandbox AppDomain sandbox = AppDomain.CreateDomain( "Sandbox", null, appDomainSetup, restrictedPerms, apiStrongName); Any assembly that is loaded into the sandbox with a strong name the same as one in the list of full-trust strong names is unconditionally given full-trust permissions within the sandbox, irregardless of permissions and sandbox setup. This is very powerful! You should only use this for assemblies that you trust as much as the code creating the sandbox. So now you have a class that you want the sandboxed code to call: // within assemblyWithApi public class MyApi { public static void MethodToDoThings() { ... } } // within the sandboxed dll public class UntrustedSandboxedClass { public void DodgyMethod() { ... MyApi.MethodToDoThings(); ... } } However, if you try to do this, you get quite an ugly exception: MethodAccessException: Attempt by security transparent method ‘UntrustedSandboxedClass.DodgyMethod()’ to access security critical method ‘MyApi.MethodToDoThings()’ failed. Security transparency, which I covered in my first post in the series, has entered the picture. Partially-trusted code runs at the Transparent security level, fully-trusted code runs at the Critical security level, and Transparent code cannot under any circumstances call Critical code. Security transparency and AllowPartiallyTrustedCallersAttribute So the solution is easy, right? Make MethodToDoThings SafeCritical, then the transparent code running in the sandbox can call the api: [SecuritySafeCritical] public static void MethodToDoThings() { ... } However, this doesn’t solve the problem. When you try again, exactly the same exception is thrown; MethodToDoThings is still running as Critical code. What’s going on? By default, a fully-trusted assembly always runs Critical code, irregardless of any security attributes on its types and methods. This is because it may not have been designed in a secure way when called from transparent code – as we’ll see in the next post, it is easy to open a security hole despite all the security protections .NET 4 offers. When exposing an assembly to be called from partially-trusted code, the entire assembly needs a security audit to decide what should be transparent, safe critical, or critical, and close any potential security holes. This is where AllowPartiallyTrustedCallersAttribute (APTCA) comes in. Without this attribute, fully-trusted assemblies run Critical code, and partially-trusted assemblies run Transparent code. When this attribute is applied to an assembly, it confirms that the assembly has had a full security audit, and it is safe to be called from untrusted code. All code in that assembly runs as Transparent, but SecurityCriticalAttribute and SecuritySafeCriticalAttribute can be applied to individual types and methods to make those run at the Critical or SafeCritical levels, with all the restrictions that entails. So, to allow the sandboxed assembly to call the full-trust API assembly, simply add APCTA to the API assembly: [assembly: AllowPartiallyTrustedCallers] and everything works as you expect. The sandboxed dll can call your API dll, and from there communicate with the rest of the application. Conclusion That’s the basics of running a full-trust assembly in a sandboxed appdomain, and allowing a sandboxed assembly to access it. The key is AllowPartiallyTrustedCallersAttribute, which is what lets partially-trusted code call a fully-trusted assembly. However, an assembly with APTCA applied to it means that you have run a full security audit of every type and member in the assembly. If you don’t, then you could inadvertently open a security hole. I’ll be looking at ways this can happen in my next post.

  Read the article

• BizTalk Envelopes explained

  - by Robert Kokuti

  Recently I've been trying to get some order into an ESB-BizTalk pub/sub scenario, and decided to wrap the payload into standardized envelopes. I have used envelopes before in a 'light weight' fashion, and I found that they can be quite useful and powerful if used systematically. Here is what I learned. The Theory In my experience, Envelopes are often underutilised in a BizTalk solution, and quite often their full potential is not well understood. Here I try to simplify the theory behind the Envelopes within BizTalk.   Envelopes can be used to attach additional data to the ‘real’ data (payload). This additional data can contain all routing and processing information, and allows treating the business data as a ‘black box’, possibly compressed and/or encrypted etc. The point here is that the infrastructure does not need to know anything about the business data content, just as a post man does not need to know the letter within the envelope. BizTalk has built-in support for envelopes through the XMLDisassembler and XMLAssembler pipeline components (these are part of the XMLReceive and XMLSend default pipelines). These components, among other things, perform the following: XMLDisassembler Extracts the payload from the envelope into the Message Body Copies data from the envelope into the message context, as specified by the property schema(s) associated by the envelope schema. Typically, once the envelope is through the XMLDisassembler, the payload is submitted into the Messagebox, and the rest of the envelope data are copied into the context of the submitted message. The XMLDisassembler uses the Property Schemas, referenced by the Envelope Schema, to determine the name of the promoted Message Context element.   XMLAssembler Wraps the Message Body inside the specified envelope schema Populates the envelope values from the message context, as specified by the property schema(s) associated by the envelope schema. Notice that there are no requirements to use the receiving envelope schema when sending. The sent message can be wrapped within any suitable envelope, regardless whether the message was originally received within an envelope or not. However, by sharing Property Schemas between Envelopes, it is possible to pass values from the incoming envelope to the outgoing envelope via the Message Context. The Practice Creating the Envelope Add a new Schema to the BizTalk project:   Envelopes are defined as schemas, with the <Schema> Envelope property set to Yes, and the root node’s Body XPath property pointing to the node which contains the payload. Typically, you’d create an envelope structure similar to this: Click on the <Schema> node and set the Envelope property to Yes. Then, click on the Envelope node, and set the Body XPath property pointing to the ‘Body’ node:   The ‘Body’ node is a Child Element, and its Data Structure Type is set to xs:anyType.  This allows the Body node to carry any payload data. The XMLReceive pipeline will submit the data found in the Body node, while the XMLSend pipeline will copy the message into the Body node, before sending to the destination. Promoting Properties Once you defined the envelope, you may want to promote the envelope data (anything other than the Body) as Property Fields, in order to preserve their value in the message context. Anything not promoted will be lost when the XMLDisassembler extracts the payload from the Body. Typically, this means you promote everything in the Header node. Property promotion uses associated Property Schemas. These are special BizTalk schemas which have a flat field structure. Property Schemas define the name of the promoted values in the Message Context, by combining the Property Schema’s Namespace and the individual Field names. It is worth being systematic when it comes to naming your schemas, their namespace and type name. A coherent method will make your life easier when it comes to referencing the schemas during development, and managing subscriptions (filters) in BizTalk Administration. I developed a fairly coherent naming convention which I’ll probably share in another article. Because the property schema must be flat, I recommend creating one for each level in the envelope header hierarchy. Property schemas are very useful in passing data between incoming as outgoing envelopes. As I mentioned earlier, in/out envelopes do not have to be the same, but you can use the same property schema when you promote the outgoing envelope fields as you used for the incoming schema.  As you can reference many property schemas for field promotion, you can pick data from a variety of sources when you define your outgoing envelope. For example, the outgoing envelope can carry some of the incoming envelope’s promoted values, plus some values from the standard BizTalk message context, like the AdapterReceiveCompleteTime property from the BizTalk message-tracking properties. The values you promote for the outgoing envelope will be automatically populated from the Message Context by the XMLAssembler pipeline component. Using the Envelope Receiving Enveloped messages are automatically recognized by the XMLReceive pipeline, or any other custom pipeline which includes the XMLDisassembler component. The Body Path node will become the Message Body, while the rest of the envelope values will be added to the Message context, as defined by the Property Shemas referenced by the Envelope Schema. Sending The Send Port’s filter expression can use the promoted properties from the incoming envelope. If you want to enclose the sent message within an envelope, the Send Port XMLAssembler component must be configured with the fully qualified envelope name:   One way of obtaining the fully qualified envelope name is copy it off from the envelope schema property page: The full envelope schema name is constructed as <Name>, <Assembly> The outgoing envelope is populated by the XMLAssembler pipeline component. The Message Body is copied to the specified envelope’s Body Path node, while the rest of the envelope fields are populated from the Message Context, according to the Property Schemas associated with the Envelope Schema. That’s all for now, happy enveloping!

  Read the article

• Big Data – Operational Databases Supporting Big Data – RDBMS and NoSQL – Day 12 of 21

  - by Pinal Dave

  In yesterday’s blog post we learned the importance of the Cloud in the Big Data Story. In this article we will understand the role of Operational Databases Supporting Big Data Story. Even though we keep on talking about Big Data architecture, it is extremely crucial to understand that Big Data system can’t just exist in the isolation of itself. There are many needs of the business can only be fully filled with the help of the operational databases. Just having a system which can analysis big data may not solve every single data problem. Real World Example Think about this way, you are using Facebook and you have just updated your information about the current relationship status. In the next few seconds the same information is also reflected in the timeline of your partner as well as a few of the immediate friends. After a while you will notice that the same information is now also available to your remote friends. Later on when someone searches for all the relationship changes with their friends your change of the relationship will also show up in the same list. Now here is the question – do you think Big Data architecture is doing every single of these changes? Do you think that the immediate reflection of your relationship changes with your family member is also because of the technology used in Big Data. Actually the answer is Facebook uses MySQL to do various updates in the timeline as well as various events we do on their homepage. It is really difficult to part from the operational databases in any real world business. Now we will see a few of the examples of the operational databases. Relational Databases (This blog post) NoSQL Databases (This blog post) Key-Value Pair Databases (Tomorrow’s post) Document Databases (Tomorrow’s post) Columnar Databases (The Day After’s post) Graph Databases (The Day After’s post) Spatial Databases (The Day After’s post) Relational Databases We have earlier discussed about the RDBMS role in the Big Data’s story in detail so we will not cover it extensively over here. Relational Database is pretty much everywhere in most of the businesses which are here for many years. The importance and existence of the relational database are always going to be there as long as there are meaningful structured data around. There are many different kinds of relational databases for example Oracle, SQL Server, MySQL and many others. If you are looking for Open Source and widely accepted database, I suggest to try MySQL as that has been very popular in the last few years. I also suggest you to try out PostgreSQL as well. Besides many other essential qualities PostgreeSQL have very interesting licensing policies. PostgreSQL licenses allow modifications and distribution of the application in open or closed (source) form. One can make any modifications and can keep it private as well as well contribute to the community. I believe this one quality makes it much more interesting to use as well it will play very important role in future. Nonrelational Databases (NOSQL) We have also covered Nonrelational Dabases in earlier blog posts. NoSQL actually stands for Not Only SQL Databases. There are plenty of NoSQL databases out in the market and selecting the right one is always very challenging. Here are few of the properties which are very essential to consider when selecting the right NoSQL database for operational purpose. Data and Query Model Persistence of Data and Design Eventual Consistency Scalability Though above all of the properties are interesting to have in any NoSQL database but the one which most attracts to me is Eventual Consistency. Eventual Consistency RDBMS uses ACID (Atomicity, Consistency, Isolation, Durability) as a key mechanism for ensuring the data consistency, whereas NonRelational DBMS uses BASE for the same purpose. Base stands for Basically Available, Soft state and Eventual consistency. Eventual consistency is widely deployed in distributed systems. It is a consistency model used in distributed computing which expects unexpected often. In large distributed system, there are always various nodes joining and various nodes being removed as they are often using commodity servers. This happens either intentionally or accidentally. Even though one or more nodes are down, it is expected that entire system still functions normally. Applications should be able to do various updates as well as retrieval of the data successfully without any issue. Additionally, this also means that system is expected to return the same updated data anytime from all the functioning nodes. Irrespective of when any node is joining the system, if it is marked to hold some data it should contain the same updated data eventually. As per Wikipedia - Eventual consistency is a consistency model used in distributed computing that informally guarantees that, if no new updates are made to a given data item, eventually all accesses to that item will return the last updated value. In other words -  Informally, if no additional updates are made to a given data item, all reads to that item will eventually return the same value. Tomorrow In tomorrow’s blog post we will discuss about various other Operational Databases supporting Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• concurrency::accelerator

  - by Daniel Moth

  Overview An accelerator represents a "target" on which C++ AMP code can execute and where data can reside. Typically (but not necessarily) an accelerator is a GPU device. Accelerators are represented in C++ AMP as objects of the accelerator class. For many scenarios, you do not need to obtain an accelerator object, since the runtime has a notion of a default accelerator, which is what it thinks is the best one in the system. Examples where you need to deal with accelerator objects are if you need to pick your own accelerator (based on your specific criteria), or if you need to use more than one accelerators from your app. Construction and operator usage You can query and obtain a std::vector of all the accelerators on your system, which the runtime discovers on startup. Beyond enumerating accelerators, you can also create one directly by passing to the constructor a system-wide unique path to a device if you know it (i.e. the “Device Instance Path” property for the device in Device Manager), e.g. accelerator acc(L"PCI\\VEN_1002&DEV_6898&SUBSYS_0B001002etc"); There are some predefined strings (for predefined accelerators) that you can pass to the accelerator constructor (and there are corresponding constants for those on the accelerator class itself, so you don’t have to hardcode them every time). Examples are the following: accelerator::default_accelerator represents the default accelerator that the C++ AMP runtime picks for you if you don’t pick one (the heuristics of how it picks one will be covered in a future post). Example: accelerator acc; accelerator::direct3d_ref represents the reference rasterizer emulator that simulates a direct3d device on the CPU (in a very slow manner). This emulator is available on systems with Visual Studio installed and is useful for debugging. More on debugging in general in future posts. Example: accelerator acc(accelerator::direct3d_ref); accelerator::direct3d_warp represents a target that I will cover in future blog posts. Example: accelerator acc(accelerator::direct3d_warp); accelerator::cpu_accelerator represents the CPU. In this first release the only use of this accelerator is for using the staging arrays technique that I'll cover separately. Example: accelerator acc(accelerator::cpu_accelerator); You can also create an accelerator by shallow copying another accelerator instance (via the corresponding constructor) or simply assigning it to another accelerator instance (via the operator overloading of =). Speaking of operator overloading, you can also compare (for equality and inequality) two accelerator objects between them to determine if they refer to the same underlying device. Querying accelerator characteristics Given an accelerator object, you can access its description, version, device path, size of dedicated memory in KB, whether it is some kind of emulator, whether it has a display attached, whether it supports double precision, and whether it was created with the debugging layer enabled for extensive error reporting. Below is example code that accesses some of the properties; in your real code you'd probably be checking one or more of them in order to pick an accelerator (or check that the default one is good enough for your specific workload): void inspect_accelerator(concurrency::accelerator acc) { std::wcout << "New accelerator: " << acc.description << std::endl; std::wcout << "is_debug = " << acc.is_debug << std::endl; std::wcout << "is_emulated = " << acc.is_emulated << std::endl; std::wcout << "dedicated_memory = " << acc.dedicated_memory << std::endl; std::wcout << "device_path = " << acc.device_path << std::endl; std::wcout << "has_display = " << acc.has_display << std::endl; std::wcout << "version = " << (acc.version >> 16) << '.' << (acc.version & 0xFFFF) << std::endl; } accelerator_view In my next blog post I'll cover a related class: accelerator_view. Suffice to say here that each accelerator may have from 1..n related accelerator_view objects. You can get the accelerator_view from an accelerator via the default_view property, or create new ones by invoking the create_view method that creates an accelerator_view object for you (by also accepting a queuing_mode enum value of deferred or immediate that we'll also explore in the next blog post). Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• How to restore your production database without needing additional storage

  - by David Atkinson

  Production databases can get very large. This in itself is to be expected, but when a copy of the database is needed the database must be restored, requiring additional and costly storage.  For example, if you want to give each developer a full copy of your production server, you'll need n times the storage cost for your n-developer team. The same is true for any test databases that are created during the course of your project lifecycle. If you've read my previous blog posts, you'll be aware that I've been focusing on the database continuous integration theme. In my CI setup I create a "production"-equivalent database directly from its source control representation, and use this to test my upgrade scripts. Despite this being a perfectly valid and practical thing to do as part of a CI setup, it's not the exact equivalent to running the upgrade script on a copy of the actual production database. So why shouldn't I instead simply restore the most recent production backup as part of my CI process? There are two reasons why this would be impractical. 1. My CI environment isn't an exact copy of my production environment. Indeed, this would be the case in a perfect world, and it is strongly recommended as a good practice if you follow Jez Humble and David Farley's "Continuous Delivery" teachings, but in practical terms this might not always be possible, especially where storage is concerned. It may just not be possible to restore a huge production database on the environment you've been allotted. 2. It's not just about the storage requirements, it's also the time it takes to do the restore. The whole point of continuous integration is that you are alerted as early as possible whether the build (yes, the database upgrade script counts!) is broken. If I have to run an hour-long restore each time I commit a change to source control I'm just not going to get the feedback quickly enough to react. So what's the solution? Red Gate has a technology, SQL Virtual Restore, that is able to restore a database without using up additional storage. Although this sounds too good to be true, the explanation is quite simple (although I'm sure the technical implementation details under the hood are quite complex!) Instead of restoring the backup in the conventional sense, SQL Virtual Restore will effectively mount the backup using its HyperBac technology. It creates a data and log file, .vmdf, and .vldf, that becomes the delta between the .bak file and the virtual database. This means that both read and write operations are permitted on a virtual database as from SQL Server's point of view it is no different from a conventional database. Instead of doubling the storage requirements upon a restore, there is no 'duplicate' storage requirements, other than the trivially small virtual log and data files (see illustration below). The benefit is magnified the more databases you mount to the same backup file. This technique could be used to provide a large development team a full development instance of a large production database. It is also incredibly easy to set up. Once SQL Virtual Restore is installed, you simply run a conventional RESTORE command to create the virtual database. This is what I have running as part of a nightly "release test" process triggered by my CI tool. RESTORE DATABASE WidgetProduction_virtual FROM DISK=N'C:\WidgetWF\ProdBackup\WidgetProduction.bak' WITH MOVE N'WidgetProduction' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_WidgetProduction_Virtual.vmdf', MOVE N'WidgetProduction_log' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_log_WidgetProduction_Virtual.vldf', NORECOVERY, STATS=1, REPLACE GO RESTORE DATABASE mydatabase WITH RECOVERY   Note the only change from what you would do normally is the naming of the .vmdf and .vldf files. SQL Virtual Restore intercepts this by monitoring the extension and applies its magic, ensuring the 'virtual' restore happens rather than the conventional storage-heavy restore. My automated release test then applies the upgrade scripts to the virtual production database and runs some validation tests, giving me confidence that were I to run this on production for real, all would go smoothly. For illustration, here is my 8Gb production database: And its corresponding backup file: Here are the .vldf and .vmdf files, which represent the only additional used storage for the new database following the virtual restore.   The beauty of this product is its simplicity. Once it is installed, the interaction with the backup and virtual database is exactly the same as before, as the clever stuff is being done at a lower level. SQL Virtual Restore can be downloaded as a fully functional 14-day trial. Technorati Tags: SQL Server

  Read the article

• Dynamic Bursting ... no really!

  - by Tim Dexter

  If any of you have seen me or my colleagues present BI Publisher to you then we have hopefully mentioned 'bursting.' You may have even seen a demo where we talk about being able to take a batch of data, say invoices. Then split them by some criteria, say customer id; format them with a template; generate the output and then deliver the documents to the recipients with a click. We and especially I, always say this can be completely dynamic! By this I mean, that you could store customer preferences in a database. What layout would each customer like; what output format they would like and how they would like the document delivered. We (I) talk a good talk, but typically don't do the walk in a demo. We hard code everything in the bursting query or bursting control file to get the concept across. But no more peeps! I have finally put together a dynamic bursting demo! Its been minutes in the making but its been tough to find those minutes! Read on ... It's nothing amazing in terms of making the burst dynamic. I created a CUSTOMER_PREFS table with some simple UI in an APEX application so that I can maintain their requirements. In EBS you have descriptive flexfields that could do the same thing or probably even 'contact' fields to store most of the info. Here's my table structure: Name                           Type ------------------------------ -------- CUSTOMER_ID                    NUMBER(6) TEMPLATE_TYPE                  VARCHAR2(20) TEMPLATE_NAME                  VARCHAR2(120) OUTPUT_FORMAT                  VARCHAR2(20) DELIVERY_CHANNEL               VARCHAR2(50) EMAIL                          VARCHAR2(255) FAX                            VARCHAR2(20) ATTACH                         VARCHAR2(20) FILE_LOC                       VARCHAR2(255) Simple enough right? Just need CUSTOMER_ID as the key for the bursting engine to join it to the customer data at burst time. I have not covered the full delivery options, just email, fax and file location. Remember, its a demo people :0) However the principal is exactly the same for each delivery type. They each have a set of attributes that need to be provided and you will need to handle that in your bursting query. On a side note, in EBS, you use a bursting control file, you can apply the same principals that I'm laying out here you just need to get the customer bursting info into the XML data stream so that you can refer to it in the control file using XPATH expressions. Next, we need to look up what attributes or parameters are required for each delivery method. that can be found in the documentation here.  Now we know the combinations of parameters and delivery methods we can construct the query using a series a decode statements: select distinct cp.customer_id "KEY", cp.template_name TEMPLATE, cp.template_type TEMPLATE_FORMAT, 'en-US' LOCALE, cp.output_format OUTPUT_FORMAT, 'false' SAVE_FORMAT, cp.delivery_channel DEL_CHANNEL, decode(cp.delivery_channel,'FILE', cp.file_loc , 'EMAIL', cp.email , 'FAX', cp.fax) PARAMETER1, decode(cp.delivery_channel,'FILE', c.cust_last_name||'_orders.pdf' ,'EMAIL','[email protected]' ,'FAX', 'faxserver.com') PARAMETER2, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','[email protected]' ,'FAX', null) PARAMETER3, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','Your current orders' ,'FAX',NULL) PARAMETER4, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','Please find attached a copy of your current orders with BI Publisher, Inc' ,'FAX',NULL) PARAMETER5, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','false' ,'FAX',NULL) PARAMETER6, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','[email protected]' ,'FAX',NULL) PARAMETER7 from cust_prefs cp, customers c, orders_view ov where cp.customer_id = c.customer_id and cp.customer_id = ov.customer_id order by cp.customer_id Pretty straightforward, just need to test, test, test, the query and ensure it's bringing back the correct data based on each customers preferences. Notice the NULL values for parameters that are not relevant for a given delivery channel. You should end up with bursting control data that the bursting engine can use:  Now, your users can run the burst and documents will be formatted, generated and delivered based on the customer prefs. If you're interested in the example, I have used the sample OE schema data for the base report. The report files and CUST_PREFS table are zipped up here. The zip contains the data model (.xdmz), the report and templates (.xdoz) and the sql scripts to create and load data to the CUST_PREFS table.  Once you load the report into the catalog, you'll need to create the OE data connection and point the data model at it. You'll probably need to re-point the report to the data model too. Happy Bursting!

  Read the article

• Oracle Social Network Developer Challenge Winners

  - by kellsey.ruppel

  Originally posted by Jake Kuramoto on The Apps Lab blog. Now that OpenWorld 2012 has wrapped, I have time to tell you all about what happened. Maybe you recall that Noel (@noelportugal) and I were running a modified hackathon during the show, the Oracle Social Network Developer Challenge. Without further ado, congratulations to Dimitri Gielis (@dgielis) and Martin Giffy D’Souza (@martindsouza) on their winning entry, an integration between Oracle APEX and Oracle Social Network that integrates feedback and bug submission with Oracle Social Network Conversations, allowing developers, end-users and project leaders to view and discuss the feedback on their APEX applications from within Oracle Social Network. Update: Bob Rhubart of OTN (@brhubart) interviewed Dimitri and Martin right after their big win. Money quote from Dimitri when asked what he’d buy with the $500 in Amazon gift cards, “Oracle Social Network.” Nice one. In their own words: In the developers perspective it’s important to get feedback soon, so after a first iteration and end-users start to test, they can give feedback of the application. Previously it stopped there, and it was up to the developer to communicate further with email, phone etc. With OSN every feedback and communication gets logged and other people can see the discussion immediately as well. For the end users perspective he can now communicate in a more efficient way to not only the developers, but also between themselves. Maybe many end-users (in different locations) would like to change some behaviour, by using OSN they can see the entry somebody put in with a screenshot and they can just start to chat about it. Some key technical end users can have lighten the tasks of the development team by looking at the feedback first and start to communicate with their peers. For the project manager he has now the ability to really see what communication has taken place in certain areas and can make decisions on that. Later, if things come up again, he can always go back in OSN and see what was said at that moment in time. Integrating OSN in the APEX applications enhances the user experience, makes the lives of the developers easier and gives a better overview to project managers. Incidentally, you may already know Dimitri and Martin, since both are Oracle Ace Directors. I ran into Martin at the Ace Director briefings Friday before the conference started, and at that point, he wasn’t sure he’d have time to enter the Challenge. After some coaxing, he and Dimitri agreed to give it a go and banged out their entry on Tuesday night, or more accurately, very early Wednesday morning, the day of the Challenge judging. I think they said it took them about four hours of hardcore coding to get it done, very much like a traditional hackathon, which is essentially a code sprint from idea to finished product. Here are some screenshots of the workflow they built. #gallery-1 { margin: auto; } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; } I love this idea, i.e. closing the loop between web developers and users, a very common pain point, and so did our judges. Speaking of, special thanks to our panel of three judges: Reggie Bradford (@reggiebradford), serial entrepreneur, founder of Vitrue and SVP of Cloud Product Development at Oracle Robert Hipps (@roberthipps), VP of Development for Oracle Social Network and my former boss Roland Smart (@rsmartx), VP of Social Marketing and the brains behind the Oracle Social Developer Community Finally, thanks to everyone who made this possible, including: The three other teams from HarQen (@harqen), TEAM Informatics (@teaminformatics) and Fishbowl Solutions (@fishbowle20) featuring Friend of the ‘Lab John Sim (@jrsim_uix), who finished and presented entries. I’ll be posting the details of their work this week. The one guy who finished an entry, but couldn’t make the judging, Bex Huff (@bex). Bex rallied from a hospitalization due to an allergic reaction during the show; he’s fine, don’t worry. I’ll post details of his work next week, too. The 40-plus people who registered to compete in the Challenge. Noel for all his hard work, sample code, and flying monkey target, more on that to come. The Oracle Social Network development team for supporting this event. Everyone in legal and the beta program office for their help. And finally, the Oracle Technology Network (@oracletechnet) for hosting the event and providing countless hours of operational and moral support. Sorry if I’ve missed some people, since this was a huge team effort. This event was a big success, and we plan to do similar events in the future. Stay tuned to this channel for more. 

  Read the article

• Token based Authentication for WCF HTTP/REST Services: Authentication

  - by Your DisplayName here!

  This post shows some of the implementation techniques for adding token and claims based security to HTTP/REST services written with WCF. For the theoretical background, see my previous post. Disclaimer The framework I am using/building here is not the only possible approach to tackle the problem. Based on customer feedback and requirements the code has gone through several iterations to a point where we think it is ready to handle most of the situations. Goals and requirements The framework should be able to handle typical scenarios like username/password based authentication, as well as token based authentication The framework should allow adding new supported token types Should work with WCF web programming model either self-host or IIS hosted Service code can rely on an IClaimsPrincipal on Thread.CurrentPrincipal that describes the client using claims-based identity Implementation overview In WCF the main extensibility point for this kind of security work is the ServiceAuthorizationManager. It gets invoked early enough in the pipeline, has access to the HTTP protocol details of the incoming request and can set Thread.CurrentPrincipal. The job of the SAM is simple: Check the Authorization header of the incoming HTTP request Check if a “registered” token (more on that later) is present If yes, validate the token using a security token handler, create the claims principal (including claims transformation) and set Thread.CurrentPrincipal If no, set an anonymous principal on Thread.CurrentPrincipal. By default, anonymous principals are denied access – so the request ends here with a 401 (more on that later). To wire up the custom authorization manager you need a custom service host – which in turn needs a custom service host factory. The full object model looks like this: Token handling A nice piece of existing WIF infrastructure are security token handlers. Their job is to serialize a received security token into a CLR representation, validate the token and turn the token into claims. The way this works with WS-Security based services is that WIF passes the name/namespace of the incoming token to WIF’s security token handler collection. This in turn finds out which token handler can deal with the token and returns the right instances. For HTTP based services we can do something very similar. The scheme on the Authorization header gives the service a hint how to deal with an incoming token. So the only missing link is a way to associate a token handler (or multiple token handlers) with a scheme and we are (almost) done. WIF already includes token handler for a variety of tokens like username/password or SAML 1.1/2.0. The accompanying sample has a implementation for a Simple Web Token (SWT) token handler, and as soon as JSON Web Token are ready, simply adding a corresponding token handler will add support for this token type, too. All supported schemes/token types are organized in a WebSecurityTokenHandlerCollectionManager and passed into the host factory/host/authorization manager. Adding support for basic authentication against a membership provider would e.g. look like this (in global.asax): var manager = new WebSecurityTokenHandlerCollectionManager(); manager.AddBasicAuthenticationHandler((username, password) => Membership.ValidateUser(username, password));   Adding support for Simple Web Tokens with a scheme of Bearer (the current OAuth2 scheme) requires passing in a issuer, audience and signature verification key: manager.AddSimpleWebTokenHandler(     "Bearer",     "http://identityserver.thinktecture.com/trust/initial",     "https://roadie/webservicesecurity/rest/",     "WFD7i8XRHsrUPEdwSisdHoHy08W3lM16Bk6SCT8ht6A="); In some situations, SAML token may be used as well. The following configures SAML support for a token coming from ADFS2: var registry = new ConfigurationBasedIssuerNameRegistry(); registry.AddTrustedIssuer( "d1 c5 b1 25 97 d0 36 94 65 1c e2 64 fe 48 06 01 35 f7 bd db", "ADFS"); var adfsConfig = new SecurityTokenHandlerConfiguration(); adfsConfig.AudienceRestriction.AllowedAudienceUris.Add( new Uri("https://roadie/webservicesecurity/rest/")); adfsConfig.IssuerNameRegistry = registry; adfsConfig.CertificateValidator = X509CertificateValidator.None; // token decryption (read from config) adfsConfig.ServiceTokenResolver = IdentityModelConfiguration.ServiceConfiguration.CreateAggregateTokenResolver();             manager.AddSaml11SecurityTokenHandler("SAML", adfsConfig);   Transformation The custom authorization manager will also try to invoke a configured claims authentication manager. This means that the standard WIF claims transformation logic can be used here as well. And even better, can be also shared with e.g. a “surrounding” web application. Error handling A WCF error handler takes care of turning “access denied” faults into 401 status codes and a message inspector adds the registered authentication schemes to the outgoing WWW-Authenticate header when a 401 occurs. The next post will conclude with authorization as well as the source code download.   (Wanna learn more about federation, WIF, claims, tokens etc.? Click here.)

  Read the article

• HPCM 11.1.2.2.x - How to find data in an HPCM Standard Costing database

  - by Jane Story

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} When working with a Hyperion Profitability and Cost Management (HPCM) Standard Costing application, there can often be a requirement to check data or allocated results using reporting tools e.g Smartview. To do this, you are retrieving data directly from the Essbase databases related to your HPCM model. For information, running reports is covered in Chapter 9 of the HPCM User documentation. The aim of this blog is to provide a quick guide to finding this data for reporting in the HPCM generated Essbase database in v11.1.2.2.x of HPCM. In order to retrieve data from an HPCM generated Essbase database, it is important to understand each of the following dimensions in the Essbase database and where data is located within them: Measures dimension – identifies Measures AllocationType dimension – identifies Direct Allocation Data or Genealogy Allocation data Point Of View (POV) dimensions – there must be at least one, maximum of four. Business dimensions: Stage Business dimensions – these will be identified by the Stage prefix. Intra-Stage dimension – these will be identified by the _Intra suffix. Essbase outlines and reporting is explained in the documentation here:http://docs.oracle.com/cd/E17236_01/epm.1112/hpm_user/ch09s02.html For additional details on reporting measures, please review this section of the documentation:http://docs.oracle.com/cd/E17236_01/epm.1112/hpm_user/apas03.html Reporting requirements in HPCM quite often start with identifying non balanced items in the Stage Balancing report. The following documentation link provides help with identifying some of the items within the Stage Balancing report:http://docs.oracle.com/cd/E17236_01/epm.1112/hpm_user/generatestagebalancing.html The following are some types of data upon which you may want to report: Stage Data: Direct Input Assigned Input Data Assigned Output Data Idle Cost/Revenue Unassigned Cost/Revenue Over Driven Cost/Revenue Direct Allocation Data Genealogy Allocation Data Stage Data Stage Data consists of: Direct Input i.e. input data, the starting point of your allocation e.g. in Stage 1 Assigned Input Data i.e. the cost/revenue received from a prior stage (i.e. stage 2 and higher). Assigned Output Data i.e. for each stage, the data that will be assigned forward is assigned post stage data. Reporting on this data is explained in the documentation here:http://docs.oracle.com/cd/E17236_01/epm.1112/hpm_user/ch09s03.html Dimension Selection Measures Direct Input: CostInput RevenueInput Assigned Input (from previous stages): CostReceivedPriorStage RevenueReceivedPriorStage Assigned Output (to subsequent stages): CostAssignedPostStage RevenueAssignedPostStage AllocationType DirectAllocation POV One member from each POV dimension Stage Business Dimensions Any members for the stage business dimensions for the stage you wish to see the Stage data for. All other Dimensions NoMember Idle/Unassigned/OverDriven To view Idle, Unassigned or Overdriven Costs/Revenue, first select which stage for which you want to view this data. If multiple Stages have unassigned/idle, resolve the earliest first and re-run the calculation as differences in early stages will create unassigned/idle in later stages. Dimension Selection Measures Idle: IdleCost IdleRevenue Unassigned: UnAssignedCost UnAssignedRevenue Overdriven: OverDrivenCost OverDrivenRevenue AllocationType DirectAllocation POV One member from each POV dimension Dimensions in the Stage with Unassigned/ Idle/OverDriven Cost All the Stage Business dimensions in the Stage with Unassigned/Idle/Overdriven. Zoom in on each dimension to find the individual members to find which members have Unassigned/Idle/OverDriven data. All other Dimensions NoMember Direct Allocation Data Direct allocation data shows the data received by a destination intersection from a source intersection where a direct assignment(s) exists. Reporting on direct allocation data is explained in the documentation here:http://docs.oracle.com/cd/E17236_01/epm.1112/hpm_user/ch09s04.html You would select the following to report direct allocation data Dimension Selection Measures CostReceivedPriorStage AllocationType DirectAllocation POV One member from each POV dimension Stage Business Dimensions Any members for the SOURCE stage business dimensions and the DESTINATION stage business dimensions for the direct allocations for the stage you wish to report on. All other Dimensions NoMember Genealogy Allocation Data Genealogy allocation data shows the indirect data relationships between stages. Genealogy calculations run in the HPCM Reporting database only. Reporting on genealogy data is explained in the documentation here:http://docs.oracle.com/cd/E17236_01/epm.1112/hpm_user/ch09s05.html Dimension Selection Measures CostReceivedPriorStage AllocationType GenealogyAllocation (IndirectAllocation in 11.1.2.1 and prior versions) POV One member from each POV dimension Stage Business Dimensions Any stage business dimension members from the STARTING stage in Genealogy Any stage business dimension members from the INTERMEDIATE stage(s) in Genealogy Any stage business dimension members from the ENDING stage in Genealogy All other Dimensions NoMember Notes If you still don’t see data after checking the above, please check the following Check the calculation has been run. Here are couple of indicators that might help them with that. Note the size of essbase cube before and after calculations ensure that a calculation was run against the database you are examing. Export the essbase data to a text file to confirm that some data exists. Examine the date and time on task area to see when, if any, calculations were run and what choices were used (e.g. Genealogy choices) If data does not exist in places where they are expecting, it could be that No calculations/genealogy were run No calculations were successfully run The model/data at feeder location were either absent or incompatible, resulting in no allocation e.g no driver data. Smartview Invocation from HPCM From version 11.1.2.2.350 of HPCM (this version will be GA shortly), it is possible to directly invoke Smartview from HPCM. There is guided navigation before the Smartview invocation and it is then possible to see the selected value(s) in SmartView. Click to Download HPCM 11.1.2.2.x - How to find data in an HPCM Standard Costing database (Right click or option-click the link and choose "Save As..." to download this pdf file)

  Read the article

• Cross-language Extension Method Calling

  - by Tom Hines

  Extension methods are a concise way of binding functions to particular types. In my last post, I showed how Extension methods can be created in the .NET 2.0 environment. In this post, I discuss calling the extensions from other languages. Most of the differences I find between the Dot Net languages are mainly syntax.  The declaration of Extensions is no exception.  There is, however, a distinct difference with the framework accepting excensions made with C++ that differs from C# and VB.  When calling the C++ extension from C#, the compiler will SOMETIMES say there is no definition for DoCPP with the error: 'string' does not contain a definition for 'DoCPP' and no extension method 'DoCPP' accepting a first argument of type 'string' could be found (are you missing a using directive or an assembly reference?) If I recompile, the error goes away. The strangest problem with calling the C++ extension from C# is that I first must make SOME type of reference to the class BEFORE using the extension or it will not be recognized at all.  So, if I first call the DoCPP() as a static method, the extension works fine later.  If I make a dummy instantiation of the class, it works.  If I have no forward reference of the class, I get the same error as before and recompiling does not fix it.  It seems as if this none of this is supposed to work across the languages. I have made a few work-arounds to get the examples to compile and run. Note the following examples: Extension in C# using System; namespace Extension_CS {    public static class CExtension_CS    {  //in C#, the "this" keyword is the key.       public static void DoCS(this string str)       {          Console.WriteLine("CS\t{0:G}\tCS", str);       }    } } Extension in C++ /****************************************************************************\  * Here is the C++ implementation.  It is the least elegant and most quirky,  * but it works. \****************************************************************************/ #pragma once using namespace System; using namespace System::Runtime::CompilerServices;     //<-Essential // Reference: System.Core.dll //<- Essential namespace Extension_CPP {        public ref class CExtension_CPP        {        public:               [Extension] // or [ExtensionAttribute] /* either works */               static void DoCPP(String^ str)               {                      Console::WriteLine("C++\t{0:G}\tC++", str);               }        }; } Extension in VB ' Here is the VB implementation.  This is not as elegant as the C#, but it's ' functional. Imports System.Runtime.CompilerServices ' Public Module modExtension_VB 'Extension methods can be defined only in modules.    <Extension()> _       Public Sub DoVB(ByVal str As String)       Console.WriteLine("VB" & Chr(9) & "{0:G}" & Chr(9) & "VB", str)    End Sub End Module   Calling program in C# /******************************************************************************\  * Main calling program  * Intellisense and VS2008 complain about the CPP implementation, but with a  * little duct-tape, it works just fine. \******************************************************************************/ using System; using Extension_CPP; using Extension_CS; using Extension_VB; // vitual namespace namespace TestExtensions {    public static class CTestExtensions    {       /**********************************************************************\        * For some reason, this needs a direct reference into the C++ version        * even though it does nothing than add a null reference.        * The constructor provides the fake usage to please the compiler.       \**********************************************************************/       private static CExtension_CPP x = null;   // <-DUCT_TAPE!       static CTestExtensions()       {          // Fake usage to stop compiler from complaining          if (null != x) {} // <-DUCT_TAPE       }       static void Main(string[] args)       {          string strData = "from C#";          strData.DoCPP();          strData.DoCS();          strData.DoVB();       }    } }   Calling program in VB  Imports Extension_CPP Imports Extension_CS Imports Extension_VB Imports System.Runtime.CompilerServices Module TestExtensions_VB    <Extension()> _       Public Sub DoCPP(ByVal str As String)       'Framework does not treat this as an extension, so use the static       CExtension_CPP.DoCPP(str)    End Sub    Sub Main()       Dim strData As String = "from VB"       strData.DoCS()       strData.DoVB()       strData.DoCPP() 'fake    End Sub End Module  Calling program in C++ // TestExtensions_CPP.cpp : main project file. #include "stdafx.h" using namespace System; using namespace Extension_CPP; using namespace Extension_CS; using namespace Extension_VB; void main(void) {        /*******************************************************\         * Extension methods are called like static methods         * when called from C++.  There may be a difference in         * syntax when calling the VB extension as VB Extensions         * are embedded in Modules instead of classes        \*******************************************************/     String^ strData = "from C++";     CExtension_CPP::DoCPP(strData);     CExtension_CS::DoCS(strData);     modExtension_VB::DoVB(strData); //since Extensions go in Modules }

  Read the article

• Windows Azure Recipe: Software as a Service (SaaS)

  - by Clint Edmonson

  The cloud was tailor built for aspiring companies to create innovative internet based applications and solutions. Whether you’re a garage startup with very little capital or a Fortune 1000 company, the ability to quickly setup, deliver, and iterate on new products is key to capturing market and mind share. And if you can capture that share and go viral, having resiliency and infinite scale at your finger tips is great peace of mind. Drivers Cost avoidance Time to market Scalability Solution Here’s a sketch of how a basic Software as a Service solution might be built out: Ingredients Web Role – this hosts the core web application. Each web role will host an instance of the software and as the user base grows, additional roles can be spun up to meet demand. Access Control – this service is essential to managing user identity. It’s backed by a full blown implementation of Active Directory and allows the definition and management of users, groups, and roles. A pre-built ASP.NET membership provider is included in the training kit to leverage this capability but it’s also flexible enough to be combined with external Identity providers including Windows LiveID, Google, Yahoo!, and Facebook. The provider model provides extensibility to hook into other industry specific identity providers as well. Databases – nearly every modern SaaS application is backed by a relational database for its core operational data. If the solution is sold to organizations, there’s a good chance multi-tenancy will be needed. An emerging best practice for SaaS applications is to stand up separate SQL Azure database instances for each tenant’s proprietary data to ensure isolation from other tenants. Worker Role – this is the best place to handle autonomous background processing such as data aggregation, billing through external services, and other specialized tasks that can be performed asynchronously. Placing these tasks in a worker role frees the web roles to focus completely on user interaction and data input and provides finer grained control over the system’s scalability and throughput. Caching (optional) – as a web site traffic grows caching can be leveraged to keep frequently used read-only, user specific, and application resource data in a high-speed distributed in-memory for faster response times and ultimately higher scalability without spinning up more web and worker roles. It includes a token based security model that works alongside the Access Control service. Blobs (optional) – depending on the nature of the software, users may be creating or uploading large volumes of heterogeneous data such as documents or rich media. Blob storage provides a scalable, resilient way to store terabytes of user data. The storage facilities can also integrate with the Access Control service to ensure users’ data is delivered securely. Training & Examples These links point to online Windows Azure training labs and examples where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. Developing Applications for the Cloud, 2nd Edition (eBook) This book demonstrates how you can create from scratch a multi-tenant, Software as a Service (SaaS) application to run in the cloud using the latest versions of the Windows Azure Platform and tools. The book is intended for any architect, developer, or information technology (IT) professional who designs, builds, or operates applications and services that run on or interact with the cloud. Fabrikam Shipping (SaaS reference application) This is a full end to end sample scenario which demonstrates how to use the Windows Azure platform for exposing an application as a service. We developed this demo just as you would: we had an existing on-premises sample, Fabrikam Shipping, and we wanted to see what it would take to transform it in a full subscription based solution. The demo you find here is the result of that investigation See my Windows Azure Resource Guide for more guidance on how to get started, including more links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

• Vacations on Rodrigues 2014

  And now something completely different compared to the usual technical or community related articles here on this blog. Yes, this time I'm writing some lines on my (and my family's) activities during our long weekend stay on Rodrigues. So, please bear with me, it's eventually a bit more personal... Grab a soda, some popcorn and a cosy place to continue to read. var googleAlbumLink = "https://plus.google.com/photos/117698191428446859536/albums/6047895311458281985"; //optional----------------------- var mySlideWidth = 580; var mySlideHeight = 340; var mySlideDelay = 7000; //delay in milliseconds Special promotions during school holidays Originally, our children started to ask more frequently about going on the plane again. Obviously, after their aunty from Germany was around during May, they were really eager to travel again. So, we decided that it might be a great opportunity to book some vacations during their school holidays. And just in time the local hotels and hotel groups started to advertise their special promotions for citizens and residents. After collecting multiple brochures over several days, we got attracted by various hotel packages on Rodrigues - most interestingly the expenses for the stay and flight ticket were less compared to other resorts here on the main island. As we have been to Rodrigues already back in 2008, we followed up on this idea and got in touch with a couple travel agencies. Well, I have to report that you should be really careful about the promotions from some of them. We had a very negative experience with Shamal Travel Agency in Quatre Bornes regarding their adverts and the actual price levels and age definition for children. Please, stay away from them if you are interested in transparent cost and services. Anyway, after some arrangements with two other close families we managed to confirm our stay at the Cotton Bay Hotel in Rodrigues. Given the fact that we already stayed there, and the hotel has been renovated recently, and it is under new management all looked very promising and relaxed for our vacation. Counting the days... As we already booked in July our children were counting down the days. And it got more interesting as soon as they were on school holidays finally. Well, the day arrived and waking them up at 2:30 hrs wasn't a problem after all. Quite the opposite it was fascinating for us parents to watch them waiting for the transport and later on during the airport transfer. Despite the early hours both didn't fall asleep and it was all so exciting. We are taking the plane! Well organised by the Cotton Bay Hotel Honestly, it was a breeze and a smooth ride during our stay at the hotel. From the airport transfer, the cleanliness of our bungalow, the organisation of our day trips, and the SPA - all very well and enjoyable. The children had great fun, and although it was a bit too windy to plunge into the pool they had a lot of fun with other activities on the beach and at the Kid's Club. Oh, and we had our private petting zoo with cows, sheep and goats just close to the terrace. Some of us went to check out the SPA facilities and I have to admit that the services regarding Hammam and Sauna are better than at some other hotels in Mauritius. I don't know after how many months or years I was once again enjoying a very hot sauna. Little draw-back but nothing to worry about... There is no cold water or at least ice cubes to cool down the body, but hey there was a nice breeze coming over the hills. Some day trips to mention Based on a friend's recommendation we walked to a "restaurant" called Chez Solange & Robert. Hahaha, restaurant is widely stretched in this case, as we enjoyed a great BBQ with fresh lobster, whole fish, and pieces of chicken breast in an open cottage. Just some wooden structure covered with dried palm leaves on the roof - island feeling pure! The other day we went to the Giant Tortoise & Cave Reserve Francois Leguat to observe the giant Aldabra turtles and to visit the Grande Caverne. The biggest limestone cave on the island. Compared to our last visit this was a novelty after checking out the Caverne Partate. The formations of stalactites and stalagmites are very impressive and imaginative. Our guide had lots of funny terms and despite the low light conditions the kids had a great time wandering around on the narrow wooden paths and stairs. And last but not least, we decided to check out the Tyrodrig zip lines... Everyone was allowed to join the trip through the air, and our little ones stayed close to our field guides. But finally went on their own on the very last traversal. Puuuh, it was astounishing to glide over the valley, and for sure something to repeat next time. Impressions of our vacation on Rodrigues 2014   Next stay has been discussed already Oh yes, Rodrigues baby! We are going to come again! Tentative dates have been discussed already and now it's up to us to earn enough our next holiday on that wonderful remote piece of paradise. Eventually, a little bit longer than this time. We'll see...

  Read the article

• Center Pictures and Other Objects in Office 2007 & 2010

  - by Matthew Guay

  Sometimes it can be difficult to center a picture in a document just by dragging it dragging it around. Today we show you how to center pictures, images, and other objects perfectly in Word and PowerPoint. Note: For this tutorial we’re using Office 2010, but the steps are nearly identical in 2007. Centering a Picture in Word First let’s insert a picture into our document.  Click the Insert tab, and then click Picture. Once you select the picture you want, it will be added to your document.  Usually, pictures are added wherever your curser was in the document, so in a blank document it will be added at the top left. Also notice Picture Tools show up in the Ribbon after inserting an image. Note: The following menu items are available in Picture Tools Format tab which is displayed when you select the object or image you’re working with. How do we align the picture just like we want?  Click Position to get some quick placement options, including centered in the middle of the document or on the top.    However, for more advanced placement, we can use the Align tool.  If Word isn’t maximized, you may only see the icon without the “Align” label. Notice the tools were grayed out in the menu by default.  To be able to change the Alignment, we need to first change the text wrap settings. Click the Wrap Text button, and any option other than “In Line with Text”.  Your choice will depend on the document you’re writing, just choose the option that works best in the document.   Now, select the Align tools again.  You can now position your image precisely with these options. Align Center will position your picture in the center of the page widthwise. Align Middle will put the picture in the middle of the page height-wise. This works the same with textboxes.  Simply click the Align button in the Format tab, and you can center it in the page. And if you’d like to align several objects together, simply select them all, click Group, and then select Group from the menu.   Now, in the align tools, you can center the whole group on your page for a heading, or whatever you want to use the pictures for. These steps also work the same with Office 2007. Center objects in PowerPoint This works similar in PowerPoint, except that pictures are automatically set for square wrapping automatically, so you don’t have to change anything.  Simply insert the picture or other object of your choice, click Align, and choose the option you want. Additionally, if one object is already aligned like you want, drag another object near it and you will see a Smart Guide to help you align or center the second object with the first.  This only works with shapes in PowerPoint 2010 beta, but will work with pictures, textboxes, and media in the final release this summer. Conclusion These are good methods for centering images and objects in Word and PowerPoint.  From designing perfect headers to emphasizing your message in a PowerPoint presentation, this is something we’ve found useful and hope you will too. Since we’re talking about Office here, it’s worth mentioning that Microsoft has announced the Technology Guarantee Program for Office 2010. Essentially what this means is, if you purchase a version of Office 2007 between March 5th and September 30th of this year, when Office 2010 is released you’ll be able to upgrade to it for free! Similar Articles Productive Geek Tips Add or Remove Apps from the Microsoft Office 2007 or 2010 SuiteAdd More Functions To Office 2007 By Installing Add-InsCustomize Your Welcome Picture Choices in Windows VistaEasily Rotate Pictures In Word 2007Add Effects To Your Pictures in Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox)

  Read the article

• Merck Serono Gains Deep Understanding of Product Portfolio Value-Drivers, Risks, and Sales Expectations Through Forecasting Solution

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Merck Serono S.A. is the biopharmaceutical division of Merck KGaA. It offers leading brands in 150 countries to help patients with cancer, multiple sclerosis, infertility, endocrine and metabolic disorders, as well as cardiovascular diseases. Challenges: Establish a better decision-making framework for its complex, development portfolio of pharmaceutical products, where single-point estimates or expected averages of portfolio values, portfolio risks, and sales forecasts are insufficient and can be misleading Enable the company to be aware at all times of the range of possible outcomes of technical and market risks and uncertainties, such as the technical uncertainty of whether a product will produce the desired clinical outcomes, or the market-related uncertainty of whether a product will be outperformed by its competitors Solutions to Overcome the Challenges: Used Oracle Crystal Ball to devise a Monte-Carlo-based approach to better analyze and define the values and risks of the company’s development portfolio, laying the groundwork for optimized decision-making Enabled a better understanding of the range of potential values and risks to improve portfolio planning Enabled detailed analysis of the likelihood of favorable or unfavorable outcomes, such as the likelihood of whether Merck Serono can meet its sales targets planned for the next ten years with its existing product portfolio Gained the ability to take into account correlative risks, synergies and project interactions, enabling Merck Serono to better forecast what the company may achieve—for example, that there is a 70% probability of a particular sales target being met Established Monte-Carlo-based analysis using Oracle Crystal Ball as a useful element in decision-making at the board level, as the approach provides a better analysis of values and risks associated with the company’s product portfolio “Oracle Crystal Ball enables us to make Monte Carlo simulations of the potential value and sales of our development portfolio. It is a very powerful tool for gaining a thorough understanding and improved awareness of value drivers, uncertainties, and risks, along with associated probabilities.” – Riccardo Lampariello, Associate Director, Merck Serono S.A Why Oracle “We chose Oracle Crystal Ball to enable us to perform Monte Carlo analysis, which gives us a deeper understanding and improved awareness of the value drivers, uncertainties and risks of our portfolio of development projects,” said Kimber Hardy, head of valuation and analysis, Merck Serono S.A. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Click here to read the full version of the customer success story Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Goodbye XML&hellip; Hello YAML (part 2)

  - by Brian Genisio's House Of Bilz

  Part 1 After I explained my motivation for using YAML instead of XML for my data, I got a lot of people asking me what type of tooling is available in the .Net space for consuming YAML.  In this post, I will discuss a nice tooling option as well as describe some small modifications to leverage the extremely powerful dynamic capabilities of C# 4.0.  I will be referring to the following YAML file throughout this post Recipe: Title: Macaroni and Cheese Description: My favorite comfort food. Author: Brian Genisio TimeToPrepare: 30 Minutes Ingredients: - Name: Cheese Quantity: 3 Units: cups - Name: Macaroni Quantity: 16 Units: oz Steps: - Number: 1 Description: Cook the macaroni - Number: 2 Description: Melt the cheese - Number: 3 Description: Mix the cooked macaroni with the melted cheese Tooling It turns out that there are several implementations of YAML tools out there.  The neatest one, in my opinion, is YAML for .NET, Visual Studio and Powershell.  It includes a great editor plug-in for Visual Studio as well as YamlCore, which is a parsing engine for .Net.  It is in active development still, but it is certainly enough to get you going with YAML in .Net.  Start by referenceing YamlCore.dll, load your document, and you are on your way.  Here is an example of using the parser to get the title of the Recipe: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var title = recipe["Title"] as string; In a similar way, you can access data in the Ingredients set: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var ingredients = recipe["Ingredients"] as ArrayList; foreach (Hashtable ingredient in ingredients) { var name = ingredient["Name"] as string; } You may have noticed that YamlCore uses non-generic Hashtables and ArrayLists.  This is because YamlCore was designed to work in all .Net versions, including 1.0.  Everything in the parsed tree is one of two things: Hashtable, ArrayList or Value type (usually String).  This translates well to the YAML structure where everything is either a Map, a Set or a Value.  Taking it further Personally, I really dislike writing code like this.  Years ago, I promised myself to never write the words Hashtable or ArrayList in my .Net code again.  They are ugly, mostly depreciated collections that existed before we got generics in C# 2.0.  Now, especially that we have dynamic capabilities in C# 4.0, we can do a lot better than this.  With a relatively small amount of code, you can wrap the Hashtables and Array lists with a dynamic wrapper (wrapper code at the bottom of this post).  The same code can be re-written to look like this: dynamic doc = YamlDoc.Load("Data.yaml"); var title = doc.Recipe.Title; And dynamic doc = YamlDoc.Load("Data.yaml"); foreach (dynamic ingredient in doc.Recipe.Ingredients) { var name = ingredient.Name; } I significantly prefer this code over the previous.  That’s not all… the magic really happens when we take this concept into WPF.  With a single line of code, you can bind to the data dynamically in the view: DataContext = YamlDoc.Load("Data.yaml"); Then, your XAML is extremely straight-forward (Nothing else.  No static types, no adapter code.  Nothing): <StackPanel> <TextBlock Text="{Binding Recipe.Title}" /> <TextBlock Text="{Binding Recipe.Description}" /> <TextBlock Text="{Binding Recipe.Author}" /> <TextBlock Text="{Binding Recipe.TimeToPrepare}" /> <TextBlock Text="Ingredients:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Ingredients}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Quantity}" /> <TextBlock Text=" " /> <TextBlock Text="{Binding Units}" /> <TextBlock Text=" of " /> <TextBlock Text="{Binding Name}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> <TextBlock Text="Steps:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Steps}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Number}" /> <TextBlock Text=": " /> <TextBlock Text="{Binding Description}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> </StackPanel> This nifty XAML binding trick only works in WPF, unfortunately.  Silverlight handles binding differently, so they don’t support binding to dynamic objects as of late (March 2010).  This, in my opinion, is a major lacking feature in Silverlight and I really hope we will see this feature available to us in Silverlight 4 Release.  (I am not very optimistic for Silverlight 4, but I can hope for the feature in Silverlight 5, can’t I?) Conclusion I still have a few things I want to say about using YAML in the .Net space including de-serialization and using IronRuby for your YAML parser, but this post is hopefully enough to see how easy it is to incorporate YAML documents in your code. Codeplex Site for YAML tools Dynamic wrapper for YamlCore

  Read the article

• Sea Monkey Sales & Marketing, and what does that have to do with ERP?

  - by user709270

  Tier One Defined By Lyle Ekdahl, Oracle JD Edwards Group Vice President and General Manager  I recently became aware of the latest Sea Monkey Sales & Marketing tactic. Wait now, what is Sea Monkey Sales & Marketing and what does that have to do with ERP? Well if you grew up in USA during the 50’s, 60’s and maybe a bit in the early 70’s there was a unifying media of culture known as the comic book. I was a big Iron Man fan. I always liked the troubled hero aspect of Tony Start and hey he was a technologist. This is going somewhere, just hold on. Of course comic books like most media contained advertisements. Ninety pound weakling transformed by Charles Atlas in just 15 minutes per day. Baby Ruth, Juicy Fruit Gum and all assortments of Hostess goodies were on display. The best ad was for the “Amazing Live Sea-Monkeys – The real live fun-pets you grow yourself!” These ads set the standard for exaggeration and half-truth; “…they love attention…so eager to please, they can even be trained…” The cartoon picture on the ad is of a family of royal looking sea creatures – daddy, mommy, son and little sis – sea monkey? There was a disclaimer at the bottom in fine print, “Caricatures shown not intended to depict Artemia.” Ok what ten years old knows what the heck artemia is? Well you grow up fast once you’ve been separated from your buck twenty five plus postage just to discover that it is brine shrimp. Really dumb brine shrimp that don’t take commands or do tricks. Unfortunately the technology industry is full of sea monkey sales and marketing. Yes believe it or not in some cases there is subterfuge and obfuscation used to secure contracts. Hey I get it; the picture on the box might not be the actual size. Make up what you want about your product, but here is what I don’t like, could you leave out the obvious falsity when it comes to my product, especially the negative stuff. So here is the latest one – “Oracle’s JD Edwards is NOT tier one”. Really? Definition please! Well a whole host of googleable and reputable sources confirm that a tier one vendor is large, well known, and enjoys national and international recognition. Let me see large, so thousands of customers? Oh and part of the world’s largest business software and hardware corporation? Check and check JD Edwards has that and that. Well known, enjoying national and international recognition? Oracle’s JD Edwards EnterpriseOne is available in 21 languages and is directly localized in 33 countries that support some of the world’s largest multinationals and many midsized domestic market companies. Something on the order of half the JD Edwards customer base is outside North America. My passport is on its third insert after 2 years and not from vacations. So if you don’t mind I am going to mark national and international recognition in the got it column. So what else is there? Well let me offer a few criteria. Longevity – The JD Edwards products benefit from 35+ years of intellectual property development; through booms, busts, mergers and acquisitions, we are still here Vision & innovation – JD Edwards is the first full suite ERP to run on the iPad as just one example Proven track record of execution – Since becoming part of Oracle, JD Edwards has released to the market over 20 deliverables including major release, point releases, new apps modules, tool releases, integrations…. Solid, focused functionality with a flexible, interoperable, extensible underlying architecture – JD Edwards offers solid core ERP with specialty modules for verticals all delivered on a well defined independent tools layer that helps enable you to scale your business without an ERP reimplementation A continuation plan – Oracle’s JD Edwards offers our customers a 6 year roadmap as well as interoperability with Oracle’s next generation of applications Oh I almost forgot that the expert sources agree on one additional thing, tier one may be a preferred vendor that offers product and services to you with appealing value. You should check out the TCO studies of JD Edwards. I think you will see what the thousands of customers that rely on these products to run their businesses enjoy – that is the tier one solution with the lowest TCO. Oh and if you get an offer to buy an ERP for no license charge, remember the picture on the box might not be the actual size. 

  Read the article

• Write your Tests in RSpec with IronRuby

  - by kazimanzurrashid

  [Note: This is not a continuation of my previous post, treat it as an experiment out in the wild. ] Lets consider the following class, a fictitious Fund Transfer Service: public class FundTransferService : IFundTransferService { private readonly ICurrencyConvertionService currencyConvertionService; public FundTransferService(ICurrencyConvertionService currencyConvertionService) { this.currencyConvertionService = currencyConvertionService; } public void Transfer(Account fromAccount, Account toAccount, decimal amount) { decimal convertionRate = currencyConvertionService.GetConvertionRate(fromAccount.Currency, toAccount.Currency); decimal convertedAmount = convertionRate * amount; fromAccount.Withdraw(amount); toAccount.Deposit(convertedAmount); } } public class Account { public Account(string currency, decimal balance) { Currency = currency; Balance = balance; } public string Currency { get; private set; } public decimal Balance { get; private set; } public void Deposit(decimal amount) { Balance += amount; } public void Withdraw(decimal amount) { Balance -= amount; } } We can write the spec with MSpec + Moq like the following: public class When_fund_is_transferred { const decimal ConvertionRate = 1.029m; const decimal TransferAmount = 10.0m; const decimal InitialBalance = 100.0m; static Account fromAccount; static Account toAccount; static FundTransferService fundTransferService; Establish context = () => { fromAccount = new Account("USD", InitialBalance); toAccount = new Account("CAD", InitialBalance); var currencyConvertionService = new Moq.Mock<ICurrencyConvertionService>(); currencyConvertionService.Setup(ccv => ccv.GetConvertionRate(Moq.It.IsAny<string>(), Moq.It.IsAny<string>())).Returns(ConvertionRate); fundTransferService = new FundTransferService(currencyConvertionService.Object); }; Because of = () => { fundTransferService.Transfer(fromAccount, toAccount, TransferAmount); }; It should_decrease_from_account_balance = () => { fromAccount.Balance.ShouldBeLessThan(InitialBalance); }; It should_increase_to_account_balance = () => { toAccount.Balance.ShouldBeGreaterThan(InitialBalance); }; } and if you run the spec it will give you a nice little output like the following: When fund is transferred » should decrease from account balance » should increase to account balance 2 passed, 0 failed, 0 skipped, took 1.14 seconds (MSpec). Now, lets see how we can write exact spec in RSpec. require File.dirname(__FILE__) + "/../FundTransfer/bin/Debug/FundTransfer" require "spec" require "caricature" describe "When fund is transferred" do Convertion_Rate = 1.029 Transfer_Amount = 10.0 Initial_Balance = 100.0 before(:all) do @from_account = FundTransfer::Account.new("USD", Initial_Balance) @to_account = FundTransfer::Account.new("CAD", Initial_Balance) currency_convertion_service = Caricature::Isolation.for(FundTransfer::ICurrencyConvertionService) currency_convertion_service.when_receiving(:get_convertion_rate).with(:any, :any).return(Convertion_Rate) fund_transfer_service = FundTransfer::FundTransferService.new(currency_convertion_service) fund_transfer_service.transfer(@from_account, @to_account, Transfer_Amount) end it "should decrease from account balance" do @from_account.balance.should be < Initial_Balance end it "should increase to account balance" do @to_account.balance.should be > Initial_Balance end end I think the above code is self explanatory, treat the require(line 1- 4) statements as the add reference of our visual studio projects, we are adding all the required libraries with this statement. Next, the describe which is a RSpec keyword. The before does exactly the same as NUnit's Setup or MsTest’s TestInitialize attribute, but in the above we are using before(:all) which acts as ClassInitialize of MsTest, that means it will be executed only once before all the test methods. In the before(:all) we are first instantiating the from and to accounts, it is same as creating with the full name (including namespace)  like fromAccount = new FundTransfer.Account(.., ..), next, we are creating a mock object of ICurrencyConvertionService, check that for creating the mock we are not using the Moq like the MSpec version. This is somewhat an interesting issue of IronRuby or maybe the DLR, it seems that it is not possible to use the lambda expression that most of the mocking tools uses in arrange phase in Iron Ruby, like: currencyConvertionService.Setup(ccv => ccv.GetConvertionRate(Moq.It.IsAny<string>(), Moq.It.IsAny<string>())).Returns(ConvertionRate); But the good news is, there is already an excellent mocking tool called Caricature written completely in IronRuby which we can use to mock the .NET classes. May be all the mocking tool providers should give some thought to add the support for the DLR, so that we can use the tool that we are already familiar with. I think the rest of the code is too simple, so I am skipping the explanation. Now, the last thing, how we are going to run it with RSpec, lets first install the required gems. Open you command prompt and type the following: igem sources -a http://gems.github.com This will add the GitHub as gem source. Next type: igem install uuidtools caricature rspec and at last we have to create a batch file so that we can execute it in the Notepad++, create a batch like in the IronRuby bin directory like my previous post and put the following in that batch file: @echo off cls call spec %1 --format specdoc pause Next, add a run menu and shortcut in the Notepad++ like my previous post. Now when we run it it will show the following output: When fund is transferred - should decrease from account balance - should increase to account balance Finished in 0.332042 seconds 2 examples, 0 failures Press any key to continue . . . You will complete code of this post in the bottom. That's it for today. Download: RSpecIntegration.zip

  Read the article

• Surface and the Uphill Battle to Win Over iPad Users (Namely: Me)

  - by D'Arcy Lussier

  I went away this past weekend and decided to bring along the Windows 8 tablet from the Build conference last year – y’know, to give Windows 8 a try in a typical scenario. I also brought our iPad 2 along since I figured my wife would want to use that. I’d love to tell you how I found using my Windows 8 tablet but I can’t – I used the iPad exclusively the entire weekend. It was during this that I realized what Microsoft needs to do to win me over as an iPad user. As you’ll see, I’m left wondering what it is that Surface is meant to compete with: iPad and other tablets, or thin laptops like the MacBook Air or Ultrabooks. Device Size I really like the size of the iPad compared with the Build tablet. It’s not as long and the thinness/weight of the device makes it feel more like you’re holding a magazine than a computer. I’m pleased that Microsoft will be matching the thinness of the iPad with Surface, but I’m suspect as to what that actually means. The iPad’s edges slant inwards where the Surface has a thicker boxish look (similar to the iPhone 4S). So while they may have the same depth at the deepest part of both devices, I bet the iPad will come off feeling thinner. However, its not lost on me the number of external port options the Surface’s design provides over the iPad (Usb, etc.). With that said, I haven’t missed having a USB slot on my iPad. I’m not a fan of lengthening the Surface screen size to almost a full inch over the iPad, mainly because… Vertical Orientation Experience Did you notice at the announce event, in the images of the devices that have been released, and in any marketing for it, that the surface is always displayed in horizontal orientation. This is a huge beef I have with my Build tablet and why I prefer the iPad. Yes the iPad can do the wide-screenish mode, but the iPad is oriented to be vertical by nature. Don’t agree? Look at the button and camera placement – both on the shorter sides of the device. Compare that with the Surface, where the orientation for the button and camera is on the longer sides. To be fair, Blackberry and the horde of Android tablets out there haven’t gotten this either – since most monitors are widescreen nowadays tablets should be too right? Wrong. Widescreen is great for certain things, but tasks such as reading is not one of them – hence why monitor companies like Dell provide stands that allow you to flip your widescreen monitor to a vertical orientation. That Microsoft has chosen a horizontal orientation by default for Windows 8 is disappointing – hopefully hardware manufacturers will be given the option of a default vertical orientation. Fast Startup Time I like that I can turn off/turn on the iPad very quickly. Even from a true “off” mode and not just sleeping, the iPad boots up very quickly. Windows RT needs to have that same quick response. If I start finding that I’m waiting for the device to boot up for more than 30 seconds that could be a show stopper. No Heat I really hate that the Build tablet has fans that kick in to cool the procs, but its basically a slate computer and I get its part of that prototype build. For Surface, it needs to be the same type of experience as the iPad – no heat! I know Surface doesn’t have fans and uses some cool new vent system or something like that, but even then – I want to sit and read a book on my Surface without having to feel any heat coming from the device, which is the experience I have with the iPad now. What About Apps?! I am definitely not the target client when it comes to app stores. On my iPad I use: Safari Kindle Reader Twitter App Settlers of Catan TSN’s App And that’s it. So really, while its nice that some version of Office might be available, I’m not planning on utilizing a Surface for creating a PowerPoint or working on a Word document – that’s what my laptop is for. I want my tablet to be for information snacking or as an e-reader and occasionally an entertainment device. Surface vs iPad or Surface vs Air? The more that I read up on Surface, the more I wonder if it won’t be a touch-enabled MacBook Air competitor more than an iPad one. Also, I really question if Microsoft gets tablets – when one of your main selling features is a built-in physical keyboard it speaks more to a traditional laptop experience than a tablet one that’s entirely reliant on touch. Still, I really love the Windows Phone interface – way more than iOS – so I’m still very optimistic that the Metro experience on the tablet will be fantastic. I just worry that Microsoft has interpreted a tablet as a computer with a removable keyboard and a touch screen, and that’s not what tablet computing is about at all.

  Read the article

• Exadata Parameter _AUTO_MANAGE_EXADATA_DISKS

  - by AVargas

  Normal 0 false false false EN-US X-NONE HE MicrosoftInternetExplorer4 DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267" UnhideWhenUsed="false" QFormat="true" Name="Normal"/ UnhideWhenUsed="false" QFormat="true" Name="heading 1"/ UnhideWhenUsed="false" QFormat="true" Name="Title"/ UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/ UnhideWhenUsed="false" QFormat="true" Name="Strong"/ UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/ UnhideWhenUsed="false" Name="Table Grid"/ UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/ UnhideWhenUsed="false" Name="Light Shading"/ UnhideWhenUsed="false" Name="Light List"/ UnhideWhenUsed="false" Name="Light Grid"/ UnhideWhenUsed="false" Name="Medium Shading 1"/ UnhideWhenUsed="false" Name="Medium Shading 2"/ UnhideWhenUsed="false" Name="Medium List 1"/ UnhideWhenUsed="false" Name="Medium List 2"/ UnhideWhenUsed="false" Name="Medium Grid 1"/ UnhideWhenUsed="false" Name="Medium Grid 2"/ UnhideWhenUsed="false" Name="Medium Grid 3"/ UnhideWhenUsed="false" Name="Dark List"/ UnhideWhenUsed="false" Name="Colorful Shading"/ UnhideWhenUsed="false" Name="Colorful List"/ UnhideWhenUsed="false" Name="Colorful Grid"/ UnhideWhenUsed="false" Name="Light Shading Accent 1"/ UnhideWhenUsed="false" Name="Light List Accent 1"/ UnhideWhenUsed="false" Name="Light Grid Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/ UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/ UnhideWhenUsed="false" QFormat="true" Name="Quote"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/ UnhideWhenUsed="false" Name="Dark List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/ UnhideWhenUsed="false" Name="Colorful List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/ UnhideWhenUsed="false" Name="Light Shading Accent 2"/ UnhideWhenUsed="false" Name="Light List Accent 2"/ UnhideWhenUsed="false" Name="Light Grid Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/ UnhideWhenUsed="false" Name="Dark List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/ UnhideWhenUsed="false" Name="Colorful List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/ UnhideWhenUsed="false" Name="Light Shading Accent 3"/ UnhideWhenUsed="false" Name="Light List Accent 3"/ UnhideWhenUsed="false" Name="Light Grid Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/ UnhideWhenUsed="false" Name="Dark List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/ UnhideWhenUsed="false" Name="Colorful List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/ UnhideWhenUsed="false" Name="Light Shading Accent 4"/ UnhideWhenUsed="false" Name="Light List Accent 4"/ UnhideWhenUsed="false" Name="Light Grid Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/ UnhideWhenUsed="false" Name="Dark List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/ UnhideWhenUsed="false" Name="Colorful List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/ UnhideWhenUsed="false" Name="Light Shading Accent 5"/ UnhideWhenUsed="false" Name="Light List Accent 5"/ UnhideWhenUsed="false" Name="Light Grid Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/ UnhideWhenUsed="false" Name="Dark List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/ UnhideWhenUsed="false" Name="Colorful List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/ UnhideWhenUsed="false" Name="Light Shading Accent 6"/ UnhideWhenUsed="false" Name="Light List Accent 6"/ UnhideWhenUsed="false" Name="Light Grid Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/ UnhideWhenUsed="false" Name="Dark List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/ UnhideWhenUsed="false" Name="Colorful List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Book Title"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} Exadata auto disk management is controlled by the parameter _AUTO_MANAGE_EXADATA_DISKS. The default value for this parameter is TRUE.When _AUTO_MANAGE_EXADATA_DISKS is enabled, Exadata automate the following disk operations:If a griddisk becomes unavailable/available, ASM will OFFLINE/ONLINE it.If a physicaldisk fails or its status change to predictive failure, for all griddisks built on it ASM will DROP FORCE the failed ones and DROP the ones with predictive failures.If a flashdisk performance degrades, if there are griddisks built on it, they will be DROPPED FORCE in ASM.If a physicaldisk is replaced, the celldisk and griddisks will be recreated and the griddisks will be automatically ADDED in ASM, if they were automatically dropped by ASM. If you manually drop the disks, that will not happen.If a NORMAL, ONLINE griddisk is manually dropped, FORCE option should not be used, otherwise the disk will be automatically added back in ASM. If a gridisk is inactivated, ASM will automatically OFFLINE it.If a gridisk is activated, ASM will automatically ONLINED it. There are some error conditions that may require to temporarily disable _AUTO_MANAGE_EXADATA_DISKS.Details on MOS 1408865.1 - Exadata Auto Disk Management Add disk failing and ASM Rebalance interrupted with error ORA-15074. Immediately after taking care of the problem _AUTO_MANAGE_EXADATA_DISKS should be set back to its default value of TRUE. Full details on Auto disk management feature in Exadata (Doc ID 1484274.1)

  Read the article

• Using SQL Source Control with Fortress or Vault &ndash; Part 1

  - by AjarnMark

  I am fanatical when it comes to managing the source code for my company.  Everything that we build (in source form) gets put into our source control management system.  And I’m not just talking about the UI and middle-tier code written in C# and ASP.NET, but also the back-end database stuff, which at times has been a pain.  We even script out our Scheduled Jobs and keep a copy of those under source control. The UI and middle-tier stuff has long been easy to manage as we mostly use Visual Studio which has integration with source control systems built in.  But the SQL code has been a little harder to deal with.  I have been doing this for many years, well before Microsoft came up with Data Dude, so I had already established a methodology that, while not as smooth as VS, nonetheless let me keep things well controlled, and allowed doing my database development in my tool of choice, Query Analyzer in days gone by, and now SQL Server Management Studio.  It just makes sense to me that if I’m going to do database development, let’s use the database tool set.  (Although, I have to admit I was pretty impressed with the demo of Juneau that Don Box did at the PASS Summit this year.)  So as I was saying, I had developed a methodology that worked well for us (and I’ll probably outline in a future post) but it could use some improvement. When Solutions and Projects were first introduced in SQL Management Studio, I thought we were finally going to get our same experience that we have in Visual Studio.  Well, let’s say I was underwhelmed by Version 1 in SQL 2005, and apparently so were enough other people that by the time SQL 2008 came out, Microsoft decided that Solutions and Projects would be deprecated and completely removed from a future version.  So much for that idea. Then I came across SQL Source Control from Red-Gate.  I have used several tools from Red-Gate in the past, including my favorites SQL Compare, SQL Prompt, and SQL Refactor.  SQL Prompt is worth its weight in gold, and the others are great, too.  Earlier this year, we upgraded from our earlier product bundles to the new Developer Bundle, and in the process added SQL Source Control to our collection.  I thought this might really be the golden ticket I was looking for.  But my hopes were quickly dashed when I discovered that it only integrated with Microsoft Team Foundation Server and Subversion as the source code repositories.  We have been using SourceGear’s Vault and Fortress products for years, and I wholeheartedly endorse them.  So I was out of luck for the time being, although there were a number of people voting for Vault/Fortress support on their feedback forum (as did I) so I had hope that maybe next year I could look at it again. But just a couple of weeks ago, I was pleasantly surprised to receive notice in my email that Red-Gate had an Early Access version of SQL Source Control that worked with Vault and Fortress, so I quickly downloaded it and have been putting it through its paces.  So far, I really like what I see, and I have been quite impressed with Red-Gate’s responsiveness when I have contacted them with any issues or concerns that I have had.  I have had several communications with Gyorgy Pocsi at Red-Gate and he has been immensely helpful and responsive. I must say that development with SQL Source Control is very different from what I have been used to.  This post is getting long enough, so I’ll save some of the details for a separate write-up, but the short story is that in my regular mode, it’s all about the script files.  Script files are King and you dare not make a change to the database other than by way of a script file, or you are in deep trouble.  With SQL Source Control, you make your changes to your development database however you like.  I still prefer writing most of my changes in T-SQL, but you can also use any of the GUI functionality of SSMS to make your changes, and SQL Source Control “manages” the script for you.  Basically, when you first link your database to source control, the tool generates scripts for every primary object (tables and their indexes are together in one script, not broken out into separate scripts like DB Projects do) and those scripts are checked into your source control.  So, if you needed to, you could still do a GET from your source control repository and build the database from scratch.  But for the day-to-day work, SQL Source Control uses the same technique as SQL Compare to determine what changes have been made to your development database and how to represent those in your repository scripts.  I think that once I retrain myself to just work in the database and quit worrying about having to find and open the right script file, that this will actually make us more efficient. And for deployment purposes, SQL Source Control integrates with the full SQL Compare utility to produce a synchronization script (or do a live sync).  This is similar in concept to Microsoft’s DACPAC, if you’re familiar with that. If you are not currently keeping your database development efforts under source control, definitely examine this tool.  If you already have a methodology that is working for you, then I still think this is worth a review and comparison to your current approach.  You may find it more efficient.  But remember that the version which integrates with Vault/Fortress is still in pre-release mode, so treat it with a little caution.  I have found it to be fairly stable, but there was one bug that I found which had inconvenient side-effects and could have really been frustrating if I had been running this on my normal active development machine.  However, I can verify that that bug has been fixed in a more recent build version (did I mention Red-Gate’s responsiveness?).

  Read the article

• Top Reasons You Need A User Engagement Platform

  - by Michael Snow

  Guest post by: Amit Sircar, Senior Sales Consultant, Oracle Deliver complex enterprise functionality through a simple intuitive and unified User Interface (UI) The modern enterprise contains a wide range of applications that are used to manage the business and drive competitive advantages. Organizations respond by creating a complex structure that results in a functional and management grouping of users. Each of these groups of users requires access to multiple applications and information sources in order to perform their job functions. This leads to the lack of a unified view of enterprise information, inconsistent user interfaces and disjointed security. To be effective, portals must be designed from the end-user perspective, enabling the user to accomplish as many tasks as possible while visiting the fewest number of portals. This requires rethinking the way that portals are built, moving from a functional business unit perspective to a user-focused, process-oriented point of view. Oracle WebCenter provides the Common User Experience Architecture that allows organizations to seamlessly present a unified view of enterprise information tailored to a particular user’s role and preferences. This architecture provides the best practices, design patterns and delivery mechanism for myriad services, applications, and data sources.  In order to serve as a primary system of access, Oracle WebCenter also provides access to unstructured content and to other users via integrated search, service-oriented artifacts, content management, and collaboration tools. Provide a modern and engaging experience without modifying the core business application Web 2.0 technologies such as blogs, wikis, forums or social media sites are having a profound impact in the public internet.  These technologies can be leveraged by enterprises to add significant value to the business. Organizations need to integrate these technologies directly into their business applications while continuing to meet their security and governance needs. To deliver richer connections and become a more agile and intelligent business, WebCenter provides an enterprise portal platform that contains pre-integrated, standards-based Enterprise 2.0 services. These Enterprise 2.0 services can be easily accessed, integrated and utilized by users. By giving users the ability to use and integrate Enterprise 2.0 services such as tags, links, wikis, activities, blogs or social networking directly with their portals and applications, they are empowered to make richer connections, optimize their productivity, and ultimately increase the value of their applications. Foster a collaborative experience The organizational workplace has undergone a major change in the last decade. With increasing globalization and a distributed workforce, project teams may be physically separated by large distances. Online collaboration technologies are becoming a critical resource to enable virtual teams to share information and work together effectively. Oracle WebCenter delivers dynamic business communities with rich Services to empower teams to quickly and efficiently manage their information, applications, projects, and people without requiring IT assistance. It brings together the latest technology around Enterprise 2.0 and social computing, communities, personal productivity, and ad-hoc team interactions without any development effort. It enables the sharing and collaboration on team content, focusing an organization’s valuable resources on solving business problems, tapping into new ideas, and reducing time-to-market. Mobile Support The traditional workplace dynamics that required employees to access their work applications from their desktops have undergone a fundamental shift. Employees were used to primarily working from company offices and utilized an IT-issued computer for performing their job functions. With the introduction of flexible work hours and the growth of remote workers, more and more employees need the ability to remain productive even when they do not have access to a computer via the use of tablets and smartphones.  In addition, customers and citizens have come to expect 24x7 access to resources and websites from wherever they are located. Tablets and smartphones have empowered everyone to quickly access services they need anytime and from any place.  WebCenter provides out of the box capabilities to deliver the mobile experience in a seamless manner. Seeded device profiles and toolkits within WebCenter can be used to render the same web pages into multiple target devices such iPads, iPhones and android devices. Web designers can preview the portal using the built in simulator, make necessary updates and then deploy their UI design for the targeted device. Conclusion The competitive economy and resource constraints facing organizations today require them to find ways to make their applications, portals and Web sites more agile and intelligent and their knowledge workers more productive no matter where they are located. Organizations need to provide faster access to relevant information and resources, enhance existing applications and business processes with rich Enterprise 2.0 services, and seamlessly deliver content to mobile platforms. Oracle WebCenter successfully meets these challenges by providing the modern user experience platform for the enterprise and the Web.

  Read the article

• problem occur during installation of moses scripts

  - by lenny99

  we got error when compile moses-script. process of it as follows: minakshi@minakshi-Vostro-3500:~/Desktop/monu/moses/scripts$ make release # Compile the parts make all make[1]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts' # Building memscore may fail e.g. if boost is not available. # We ignore this because traditional scoring will still work and memscore isn't used by default. cd training/memscore ; \ ./configure && make \ || ( echo "WARNING: Building memscore failed."; \ echo 'training/memscore/memscore' >> ../../release-exclude ) checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for g++... g++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of g++... gcc3 checking for gcc... gcc checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for boostlib >= 1.31.0... yes checking for cos in -lm... yes checking for gzopen in -lz... yes checking for cblas_dgemm in -lgslcblas... no checking for gsl_blas_dgemm in -lgsl... no checking how to run the C++ preprocessor... g++ -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking n_gram.h usability... no checking n_gram.h presence... no checking for n_gram.h... no checking for size_t... yes checking for ptrdiff_t... yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands make[2]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts/training/memscore' make all-am make[3]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts/training/memscore' make[3]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts/training/memscore' make[2]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts/training/memscore' touch release-exclude # No files excluded by default pwd=`pwd`; \ for subdir in cmert-0.5 phrase-extract symal mbr lexical-reordering; do \ make -C training/$subdir || exit 1; \ echo "### Compiler $subdir"; \ cd $pwd; \ done make[2]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts/training/cmert-0.5' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts/training/cmert-0.5' ### Compiler cmert-0.5 make[2]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts/training/phrase-extract' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts/training/phrase-extract' ### Compiler phrase-extract make[2]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts/training/symal' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts/training/symal' ### Compiler symal make[2]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts/training/mbr' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts/training/mbr' ### Compiler mbr make[2]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts/training/lexical-reordering' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts/training/lexical-reordering' ### Compiler lexical-reordering ## All files that need compilation were compiled make[1]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts' /bin/sh: ./check-dependencies.pl: not found make: *** [release] Error 127 We don't know why this error occurs? check-dependencies.pl file existed in scripts folder ...

  Read the article

< Previous Page | 786 787 788 789 790 791 792 793 794 795 796 797  | Next Page >