Search Results

Search found 33247 results on 1330 pages for 'anonymous access'.

Page 794/1330 | < Previous Page | 790 791 792 793 794 795 796 797 798 799 800 801  | Next Page >

• Connect to MS Sql 2008 on local VM

  - by Campo

  I have a test machine. Server 2008 with Hyper V MSSQL 2008 Enterprise Lets call it MACHINE A on the VM it is as well Server 2008 with another MSSQL 2008 Ent Call it VM B I setup a DB on MACHINE A then backed it up and restored following the prepare database for mirroring instructions on MSDN onto VM B. I used to be able to connect to the VM B Instance from the main test server (MACHINE A) but now I cannot for some reason. It cannot seem to find the instance at all even when I browse network databases. I can ping the VM from any computer on the network and access its shares so I know it is discoverable. Just the end of a long day maybe I am missing something here.

  Read the article

• Firewall blocks FTP PASV response

  - by harper

  0 down vote favorite I have an FTP server that supports passive server mode (using PASV command). This works fine with Windows XP. When I want to access this server from Windows Vista or Windows 7 with firewall enabled I experience a immediate connection shutdown. A reset packet is sent to the server, the socket is signaled that the server had reset the connection (what is not true). The problem disappears when the firewall is disabled. Connections to other FTP servers work correctly. The difference is that the servers response to PASV does not enclose the address field with parentheses. This is legal as documented in RFC-959 and RFC-1132. How can I configure the firewall to stop this bad behavior?

  Read the article

• Motherboard/PSU crippling USB and Sata

  - by celebdor

  I very recently bought a new desktop computer. The motherboard is: Z77MX-D3H and the power supply is ocz zs series 550w. The issue I have is that once I boot to the operating system (I have tried with fedora and Ubuntu with kernels 2.6.38 - 3.4.0), my hard drive (2.5" Magnetic) occasionally makes a power switch noise and it resets. Needless to say, when this drive is the OS drive, the OS crashes. I also have a SSD that works fine with the same OS configurations, but if I have the magnetic hard drive attached as second drive, it works erratically and the reconnects result in corrupted data. I also noticed that whenever I plug an external hard drive USB2.0 or USB3.0 to the computer the issue with the reconnects is even worse: [ 52.198441] sd 7:0:0:0: [sdc] Spinning up disk... [ 57.955811] usb 4-3: USB disconnect, device number 3 [ 58.023687] .ready [ 58.023914] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.023919] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.023932] sd 7:0:0:0: [sdc] Sense not available. [ 58.024061] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024063] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024064] sd 7:0:0:0: [sdc] Sense not available. [ 58.024099] sd 7:0:0:0: [sdc] Write Protect is off [ 58.024101] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 58.024135] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024137] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024400] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.024402] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024405] sd 7:0:0:0: [sdc] Sense not available. [ 58.024448] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024450] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024451] sd 7:0:0:0: [sdc] Sense not available. [ 58.024469] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024471] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024472] sd 7:0:0:0: [sdc] Attached SCSI disk [ 58.407725] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [ 58.424921] scsi8 : usb-storage 4-3:1.0 [ 59.424185] scsi 8:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 59.424406] scsi 8:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 59.425098] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 59.425176] ses 8:0:0:1: Attached Enclosure device [ 59.425248] ses 8:0:0:1: Attached scsi generic sg3 type 13 [ 61.845836] sd 8:0:0:0: [sdc] 976707584 512-byte logical blocks: (500 GB/465 GiB) [ 61.845838] sd 8:0:0:0: [sdc] 4096-byte physical blocks [ 61.846336] sd 8:0:0:0: [sdc] Write Protect is off [ 61.846338] sd 8:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 61.846718] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.846720] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.848105] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.848106] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.857147] sdc: sdc1 [ 61.858915] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.858916] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.858918] sd 8:0:0:0: [sdc] Attached SCSI disk [ 69.875809] usb 4-3: USB disconnect, device number 4 [ 70.275816] usb 4-3: new SuperSpeed USB device number 5 using xhci_hcd [ 70.293063] scsi9 : usb-storage 4-3:1.0 [ 71.292257] scsi 9:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 71.292505] scsi 9:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 71.293527] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 71.293668] ses 9:0:0:1: Attached Enclosure device [ 71.293758] ses 9:0:0:1: Attached scsi generic sg3 type 13 [ 73.323804] usb 4-3: USB disconnect, device number 5 [ 101.868078] ses 9:0:0:1: Device offlined - not ready after error recovery [ 101.868124] ses 9:0:0:1: Failed to get diagnostic page 0x50000 [ 101.868131] ses 9:0:0:1: Failed to bind enclosure -19 [ 101.868288] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868292] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868296] sd 9:0:0:0: [sdc] Sense not available. [ 101.868428] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868434] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868439] sd 9:0:0:0: [sdc] Sense not available. [ 101.868468] sd 9:0:0:0: [sdc] Write Protect is off [ 101.868473] sd 9:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 101.868580] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868584] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868845] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868849] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868854] sd 9:0:0:0: [sdc] Sense not available. [ 101.868894] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868898] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868903] sd 9:0:0:0: [sdc] Sense not available. [ 101.868961] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868966] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868969] sd 9:0:0:0: [sdc] Attached SCSI disk Now, if I plug the same drive to the powered usb 2.0 hub of my monitor, the issue is not reproduced (at least on a 20h long operation). Also the issue of the usb reconnects is less frequent if the hard drive is plugged before I switch on the computer. Does anybody have some advice as to what I could do? Which is the faulty part/s that I should replace? As for me, I really don't know if to point my finger to the PSU or the Motherboard (I have updated to the latest firmware and checked the BIOS settings several times). EDIT: The reconnects are happening both in the Sata connected drives and the USBX connected drives.

  Read the article

• Can an LDAP query on AD provide the netbios domain name for a single account when using the Global Catalog?

  - by Kirk Liemohn

  I am using ADSI Edit to look at LDAP properties of a single user account in AD. I see properties such as userPrincipalName, but I do not see one for the fully qualified domain name (FQDN) or the netbios domain name. We will be setting up the Global Catalog (GC) to give us LDAP access to multiple domains and through configuration in an application we map LDAP properties to user profile properties within the application. With typical AD the FQDN and netbios domain name are the same for all users, but with the GC involved we need this additional information. We really only need the netbios domain name (the FQDN is not good enough). Maybe there is a LDAP query that can be done to request this information from a more top-level object in AD?

  Read the article

• secure email crashes outlook 2007

  - by Josh

  I have a number of secure emails sent to my outlook 2007 client. most arrive fine and display the prompt with regards to granting access to the certificate and then open. today i received two that when i try and open them they crash outlook. i have tried restarting outlook and my computer. please can you give me some ideas of what it could be or how i can troubleshoot this issue. i am working on Vista Utlimate x64. thanks. Josh

  Read the article

• How do I configure IIS so my Web.config is determined by URL?

  - by Scott Stafford

  I am running a test rig with IIS6 serving an ASP.NET (and Sharepoint) web site. We have several clients, and so we have custom root Web.config files for each client. For this test rig, I want to just serve straight from the Trunk of our source control. However, I'd like to be able to select different root Web.config files based on the URL (or port or whatever) I use to access the site, so I can just use one checkout of the source and run all the sites with their appropriate settings. Is this possible?

  Read the article

• Can many addon domains slow down cPanel or create problems?

  - by Marco Demaio

  I actually resell hosting plans by using one single cPanel account and many addon domains under it. Basically for each new user I don't create a new cP account, but I simply create a new ADDON domain and give him the necessary space. I know in this way the final user won't be able to manage his emails and he won't be able to access all cPanel features, but that's ok. I know in my account I'm allowed to add unlimited addon domains, but adding many addon domains is there something that might happen that slows down cPanel or could create problems? Any suggestions you could give me about the way i'm using cPanel which might not be the usual way of using it. (As for instance: "be aware that mails from different addon domains under the same CP account could create many problems.", etc.) Thanks!

  Read the article

• How to change GUI language in Outlook 2007

  - by user1466

  A new guy at work moved in from Denmark, which means that he initially logged in to our Outlook Web Access 2007 from a computer with Danish Windows. As a result, all the objects in the tree-view in Outlook are now in Danish. For example, "Inbox" is called "Indbakke". This prevails, even though he has now logged in locally on his assigned work computer which has English Windows. We're running Exchange 2003, if that matters. How do you change the language of the names of the objects in Outlook 2007? The "Microsoft Office 2007 Language Settings" tool doesn't do this, and I couldn't find anything relevant to this by googling either. In Exchange System Manager there are the "Details Templates" which define these things in different languages, but over on his mailbox there was no configuration option to change which language to use.

  Read the article

• How can I find the program making a harmonica sound?

  - by Josh

  A friend has a Windows XP SP3 machine that plays a harmonica sound for about 5 seconds throughout the day at what seems to be random intervals (every couple hours). My question is how can I find the program making this sound? Is there a Windows API hook for monitoring audio access? I've gone through and checked all the standard Windows sounds in the Control Panel and right now the theme is set to no sounds and I personally checked to make sure none of the events have a sound specified. I also checked the Task Scheduler to make sure there wasn't something scheduled to go off every couple hours. Any ideas on how to go about finding the bugger?

  Read the article

• Samba networking with a domain-joined computer

  - by MCS

  I have two computers connected to the same linksys router - one running Ubuntu 8.04 and one running Windows 7. The Windows computer is part of a work domain (when connected via VPN). I'm trying to also create a home network so I can access the linux server from Windows. From what I understand, I have to first create a Windows workgroup and then configure Samba on linux to join the Windows network. So in Windows, I went to Control Panel - Network and Internet - HomeGroup and got the following message: There is currently no homegroup on your network. Because this computer also belongs to a domain, you can't create your own homegroup, but can join one created by someone on your network. Can I use Samba to create a homegroup? Is there any other way to create a Windows workgroup? Or am I barking up the wrong tree completely?

  Read the article

• Can't communicate with Primary DNS Server

  - by horsley

  A computer, with Windows 7, can't access any website by domain suddenly. Whether this computer use a wired link or connect to the WLAN, The fault persists IP and DNS obtained automatically, and seems normal (ipconfig /all return the correct info) I can visit websites by using HTTP proxy The DNS server is available, other computer in my room works properly. I can ping myself, the gateway and any other IP, but domains I can use nslookup and obtain the correct IP info There are some error information in the event log about dns client events explaining the client can not verify the DNS server available Windows network diagnosis explain that Windows can't communicate with the device or resource (Primary DNS Server) I guess the dns client should be blame. I tried to do the following things but the fault persist. Reinstall the driver of network adapter Reset TCP/IP (netsh int ip reset) Reset Winsock (netsh winsock reset) Reset LSP I don't want to reinstall the whole os, what should I do?

  Read the article

• Ip doesn't change when switching networks, although automatic ip is set. Cause of the issue known

  - by Julio Acevedo

  I have two routers at my house. Both of them have DCHP server enabled. One of them is 192.168.1.1 and gives adresses from 192.168.1.2 to 192.168.1.32 The other one is 192.168.1.50 and gives adresses from 192.168.1.51 to 192.168.1.99 The problem is that I only have internet access in one because my ip is 192.168.1.7, and when I switch to the other one, the ip remains 192.168.1.7, even though I have automatically get a ip adress in Ipv4. When I manually change my ip to one in the range allowed by the router, I can browse the internet. Any ideas how to solve this? Thank you.

  Read the article

• How to convert laptop drive for use as VMware image?

  - by jnman

  I have a windows laptop that recently died (dead motherboard). It being a 7 year old laptop, I decided to give Apple a try this time around and try to use VMware to access my old data if necessary. In order to do this, I need to convert the physical drive to a VMware image. Googling around, it looks like I might be able to use VMware Convertor to do this. My original intent was to plug the laptop drive into a windows desktop via an external USB enclosure and create the image that way. However, upon further investigation, it looks like VMware Converter only supports converting a local machine (the desktop) or a remote machine (via IP) but not a laptop drive plugged into the local machine. So with that in mind, I'm looking for suggestions and help on how to convert this laptop drive into something I can use on my new Macbook Pro.

  Read the article

• How can I create an external SSL wrapper/tunnel page for an insecure webpage behind a firewall?

  - by Ross Rogers

  I have an security cam with a built-in webpage inside my home network. That camera is using basic HTTP authentication instead of SSL. I want to be able to access the camera's webpage from outside my network, but I don't want to open an unencrypted video stream to the outside world. Right now, I'm doing some cumbersome ssh tunneling where I bounce off an ssh server like: ssh -N -L 9090:CAMERA_IP:80 [email protected] and then I connect to my web page like: http://localhost:9090 But this is a pain. Now, gentle reader, I beseech you to tell me how I can use linux (Ubuntu) to get a fully encrypted SSL connection to my internal web page without the hassle of creating an ssh tunnel each time. I believe I can use stunnel, but I'm not sure of the command.

  Read the article

• How to recover a server from a tar file

  - by Mitch

  In moodle the LMS you can export courses, as a tar.gz, some one said they were going to give me such a thing. I was suprised by the 6 gb size. I was even more suprised when I extracted it, and found the root directory to be the root of the server. The person giving me the course instead of exporting must have just tarred the entire server!! How should I go about recovering this? Is there anyway to start this up in a virtual machine? I have a whole linux server, what to do? I could probably just hand pick the data files I need, but how to access a mysql database with out running mysql? I am so stumped!

  Read the article

• Recommendation for email setup for programatically sending lots of emails

  - by jcmoney

  To clarify I have an app that notifies users via email when certain actions take place (I am not spamming as the user has opted in to the notifications and can change that option at any time). Because of number of emails that needs to be sent, Gmail, Yahoo, etc will not work. Unless I am mistaken services like MailChimp, Lyris, etc will also not fit this need since every email is sent one at a time and is very specific to the user and action that took place. What I really want is something that would allow me to be able to call some mail function, give it a recipient, from, message and subject, and not have it be blocked by the email service. This can be a free or paid service. I have server access so I can install something if necessary as well but I don't know much about email services and fear if I do it myself, I'll get blocked by some other player like my VPS host or ISP or something.

  Read the article

• I made an .htaccess template; is there anything else that should be added or changed?

  - by purpler

  # DEFAULTS ServerSignature Off AddDefaultCharset UTF-8 DefaultLanguage en-US SetEnv Europe/Belgrade SetEnv SERVER_ADMIN [email protected] # Rewrites RewriteEngine On RewriteBase / # Redirect to WWW RewriteCond %{HTTP_HOST} ^serpentineseo.com RewriteRule (.*) http://www.serpentineseo.com/$1 [R=301,L] # Cache media files <filesMatch "\.(gif|jpg|jpeg|png|ico|swf|js)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> <FilesMatch "\.(js|css|pdf|swf)$"> Header set Cache-Control "max-age=604800" </FilesMatch> <FilesMatch "\.(html|htm|txt)$"> Header set Cache-Control "max-age=600" </FilesMatch> # DONT CACHE <FilesMatch "\.(pl|php|cgi|spl|scgi|fcgi)$"> Header unset Cache-Control </FilesMatch> # Deny access to .htaccess <Files .htaccess> order allow,deny deny from all </Files>

  Read the article

• Dell R910 with Integrated PERC H700 Adapter

  - by Alex

  I am in the process of designing an architecture based around a single Dell R910 server running Windows Server 2008 Enterprise. I would like the server to have 8 RAID1 pairs of spinning disks, so I intend to implement: Dell R910 Server Integrated PERC H700 Adapter with 1 SAS expander on each SAS connector (so 8 expanders in total) 7 RAID1 pairs of 143Gb 15K HDD, each paired on one connector using an expander 1 RAID1 pair of 600Gb 10K HDD, paired on the remaining connector using an expander My main concern is not to introduce bottlenecks in this architecture, and I have the following questions. Will the PERC H700 Adapter act as a bottleneck for disk access? Will using SAS expanders for each RAID1 pair cause a bottleneck or would this be as fast as pairing disks directly attached to the SAS connectors? Can I mix the disks, as long as the disks in each RAID1 pair are the same? I assume so. Can anyone recommend any single-to-double SAS Expanders that are known to function well with the H700? Cheers Alex

  Read the article

• Remote logging for multiple Apache virtual hosts using syslog-ng

  - by James

  I'm running a couple Apache web servers that each have 4-8 separate virtual hosts on each of them. I'm trying to setup a dedicated log server that stores each virtual host access and errors logs in a separate directory for that virtual host. For example on the logging server, /var/log/remove/10.0.0.2/virtualhost1 contains access_log and error_log /var/log/remove/10.0.0.2/virtualhost2 contains access_log and error_log /var/log/remove/10.0.0.3/virtualhost3 contains access_log and error_log and so on... Right now I have it split up by host but I can't figure out how to do it additionally by virtual host. Here are the relevant lines from the logging server's syslog-ng.conf source r_src { tcp(ip("0.0.0.0") port(5140)); }; destination r_all { file("/opt/splunk/logs/$HOST"); }; log { source(r_src); destination(r_all); }; Any help would be appreciated. Thanks!

  Read the article

• Skydrive does not synchronize with one device but synchronizes successfully with another one.

  - by Hobbes

  I have an Outlook id. I also have Skydrive installed on my personal laptop (Windows 7 x64). The folders and files synchronize successfully. Today, I installed Skydrive on my office PC and logged in with the same id as above but it does not synchronize any of my folders or files, other than the default ones. When I view the logs (filename: SkyDrive.exe.reg.2012-08-09-150239.654.log), I see the following entry. 09-17-12,13:31:35.075,45a,146c,0,PAL,systeminformationhelper.cpp(661),0,0018E4F8,CRIT,The registry key to block Remote Access is not found.,System Error Code=0x2 Any idea as to what could be the problem?

  Read the article

• What's the best solution for file sharing in my case? DAS or NAS?

  - by jakub

  I want to have in my network small, cheap and energy efficient server with will be fully customizable (Gnu/Linux, OpenBSD). What is more I want to have big, redundant storage in my network and access to it via server. I have already small terminal without hard drive (no SATA/PATA, one drive on USB) which works fine. I don't want to buy big server, or to use regular computer for that. It's not cheap. I thought about a small case (ITX?), and cheap computer in this with SATA ports, but I cannot find anything interesting :( I thought about NAS in network and server independently and booting server from NAS, I'm not sure which technologies will be good for that, and I don't know what with performance. Direct connection to NAS through network from workstation is next pro for that. What do you think about DAS? It will be good for that?

  Read the article

• Mail Server using Postfix

  - by unknown (google)

  I have currently set up my web application on Amazon EC2 server. As a well known fact sending email from EC2 has a problem. As a cheap and long lasting solution instead of using "authsmtp" is it possible to rent a server and use it as a Mail Server? I am currently looking for cheap hosting which will give me root access so that it can be configured and used as a relayhost. I am curently using Postfix as MTA. Has any one implemented this before? I am curious about its feasibility of this solution. I guess common requirements are: Dedicated IP which is not black listed Open relay( open to my Server only) Any Tips for Header configurations to keep the mails out of spam folder. This is like exactly cloning authsmtp for personal use. Any suggestions for other Mail Server software instead of Postfix?

  Read the article

• Firefox in popup window (no address search bar) ctrl-k navigates to google

  - by Greg

  In firefox hitting Ctrl+K takes you to the search bar (all fine and good). However in my webmail client (Zimbra) it pops open windows without the address/search bar. Hitting Ctrl+K there (muscle memory from Outlook Web Access) navigates immediately to google.com - hitting back doesn't work from there (Zimbra's all screwed). Is there anyway to disable Ctrl+K navigating to the search provider without changing the normal Ctrl+K to the search-bar behaviour when the search-bar is present? Or better yet force it to actually pop up the search-bar - or highlight in my main browser window's search bar?

  Read the article

• Mac/iPhone:Streaming video file to iPhone

  - by user34157

  Hi, I am redirecting my question to superuser from stackoverflow: I have a http streaming link which gives me .flv streaming feed. I want to convert that and access in my iPhone program. How can i do that? I want to have a desktop software like VLC and input this streaming feed URL and convert to iPhone supported and stream again to iPhone. I tried VLC with H.264 and Mpeg-1 audio, but seems to be it doesn't give the supported format, so as iPhone program doesn't play the video. Could someone please guide me how can i setup a desktop software which can stream iPhone supported file? Thanks in advance.

  Read the article

• Keep printed documents on Windows Server 2008 R2 Print Server

  - by MadBoy

  I've setup Windows 2008 R2 as print server. I have checked option Keep printed document option for all printers and it works fine. Users print their stuff and i can see what they are doing. Problem is everyone sees all documents that are getting printed which is not always the best idea. Is there a way to: Limit print jobs to be only seen by people who printed them and admins Limit print jobs to be only seen on server (from within Server Manager) and so print jobs dissapear when print job is done from user queue (but then admins are still able to see it and track what's printed and when for reporting purposes). Create some kind of access level list so that some people can see everything geting printed, some people see their print jobs and some people see nothing :-)

  Read the article

< Previous Page | 790 791 792 793 794 795 796 797 798 799 800 801  | Next Page >