Search Results

Search found 25300 results on 1012 pages for 'internet speed'.

Page 795/1012 | < Previous Page | 791 792 793 794 795 796 797 798 799 800 801 802  | Next Page >

• IP stops working from time to time

  - by Mattias

  Hi, have a problem that I can't seem to find the reason for. We are running a small network with windows clients(XP/Win7) and windows servers(2008 sp2/2008r2). The domaincontroller is working as DC, DNS, DHCP, VPN. We have a Level1 FBR4000 between internet and our internal network. The problem is that from time to time specific IP-adresses stops working, the only way I have gotten the devices to work again is to exclude the specific IP from the DHCP address pool and getting a new IP, then everything works again. It seems as the specific IP is beeing banned/blocked somewhere but I just can't figure out where. Anyone got an idea as to where I should start to look? I could also point out that I just reinstalled all servers due to a officemove and was hoping to get away from this problem but it just showed up again. This last time it was my iPhone that got stuck through the Wi-Fi...

  Read the article

• Adding a MySQL StoredProcedure causes not responding state

  - by Omie

  Hello I'm on Windows 7 ultimate 32bit + xampp 1.7.2 [MySQL v5.1.37] This is my stored procedure : delimiter // CREATE PROCEDURE updatePoints(IN parentid INT(5),IN userid INT(5)) DECLARE chpoints INT(5); BEGIN SELECT points INTO chpoints FROM quiz_challenges WHERE id = parentid; UPDATE quiz_users SET points = points + chpoints WHERE forumid=userid; END; // delimiter ; At first it was showing error 1064 while creating stored procedure. I added delimiters part and when I tried running the query from phpmyadmin, Firefox went into not responding state. After that I started Internet Explorer and tried opening my pages which use the same database, it worked fine. However, I tried opening phpmyadmin and IE went into not responding state as well. I restarted both servers. Later restarted PC. Tried again but its same behavior. So whats wrong with this tiny little code ? Am I missing something which might be causing infinite loop ? Thanks

  Read the article

• OBIEE 11.1.1.7.131017 is Available for Oracle Business Intelligence Enterprise Edition and Exalytics

  - by Saresh

  OBIEE 11.1.1.7.131017 is Available for Oracle Business Intelligence Enterprise Edition and Exalytics You may refer Note 1595219.1 -OBIEE 11g 11.1.1.7.131017 is Available for Oracle Business Intelligence Enterprise Edition and Exalytics for more details. Additional information: You can directly apply OBIEE 11.1.1.7.131017  on the top of OBIEE 11.1.1.7.0 without applying the OBIEE 11.1.1.7.0 patch. Oracle BI EE Suite Bundle Patch 11.1.1.7.131017 introduces support for Microsoft Internet Explorer 10 Oracle BI EE Suite Bundle Patch 11.1.1.7.131017 integrates support for Oracle BI Mobile App Designer into Oracle BI Presentation Services. The Home page displays a new Create Mobile App option and a link to the Mobile Apps Library; the New menu now also includes a Mobile App option. Note that to use these new options, you must also install the Oracle BI Mobile App Designer. Oracle BI Mobile App Designer is available in a separate patch (17220944) available from My Oracle Support. Apply the Mobile App Designer patch after installing Oracle BI EE Suite Bundle Patch 11.1.1.7.131017. Note that if you have previously installed Oracle BI Mobile App Designer on the BI system, then you do not have to re-apply Mobile App Designer patch 17220944. However, you will have to make a configuration change to re-enable the new Mobile App options. Oracle BI EE Suite Bundle Patch 11.1.1.7.131017 improves functionality for exporting data from analyses, dashboards, and other Oracle BI Presentation Catalog objects into Microsoft Excel.

  Read the article

• Virtualmin Configuration

  - by Allen

  I am trying to get Virtualmin setup and have reached a point where my noobish sysadmin skills aren't getting the job done. This is the message I get now when I try and refresh the configuration of Virtualmin. BIND DNS server is installed, and the system is configured to use it. However, the default master DNS server XXXXXX is not a fully qualified domain name. Sendmail is only accepting SMTP connections on the following ports : 127.0.0.1 port smtp. Email from other systems on the Internet will not be accepted. This can be changed in the Sendmail Mail Server module. Please advise what I need to do to get Sendmail configured properly. Thanks!

  Read the article

• How do I find out which process is eating up my bandwidth?

  - by Bruce Connor

  I think I'm being the victim of a bug here. Sometimes while I'm working (I still don't know why), my network traffic goes up to 200 KB/s and stays that way, even tough I'm not doing anything internet-related. This sometimes happens to me with the CPU usage. When it does, I just run a top command to find out which process is responsible and then kill it. Problem is: I have no way of knowing which process is responsible for my high network usage. Both the resource monitor and the top command only tell me my total network usage, neither of them tells me process specific network info. Is there another command I can use to find out which process is getting out of hand? I've already tried killing all the obvious ones (firefox, update-manager, pidgin, etc) with no luck. So far, restarting the machine is the only way I found of getting rid of the issue. EDIT: (just to be clear) I've found questions here about monitoring total bandwidth usage, but, as I mentioned, that's not what I need. UPDATE: The command iftop gives results that disagree entirely with the information reported by System Monitor. While the latter claims there's high network traffic, the former claims there's barely 1 KB/s. Thanks

  Read the article

• Windows xp : possible virus

  - by dotnet-practitioner

  I think my son downloaded some thing from internet and possibly infect the computer. The Google chrome browser will not start any more and after an hour of using computer he gets some sort of blue screen saying that memory is being dumped. I don't want to format the hdd and reinstall at this time. Can I salvage the machine by some anti virus? Questions: 1. How do I detect what kind of virus do I have? 2. What kind of free anti virus software do I download to fix this problem? Thanks

  Read the article

• Unable to connect my computer from LAN (http, smb) in UBUNTU 10.04

  - by Abdul Majeed

  I installed ubuntu 10.04, Apache, PHP, mysql, smb. Everything work fine in locally in my IP. When i trying to access my computer from LAN (other computer), it shows unable to connect. when i ping my IP from remote computer, its pinging OK. I can access internet, and all other systems (http, smb). But the problem is no one can't access my computer remotely in my LAN network. My ip is 192.168.85.105 and i want access(Appaceh,SMB) from 192.168.85.10. Is there any proxy firewall settings? I had tried following commands.. sudo iptables -F or sudo iptables-restore [logout require] If it does not work then try to disable net-filter sudo ufw --disable Please give me the solution.

  Read the article

• Where should you put constants and why?

  - by Tim Meyer

  In our mostly large applications, we usually have a only few locations for constants: One class for GUI and internal contstants (Tab Page titles, Group Box titles, calculation factors, enumerations) One class for database tables and columns (this part is generated code) plus readable names for them (manually assigned) One class for application messages (logging, message boxes etc) The constants are usually separated into different structs in those classes. In our C++ applications, the constants are only defined in the .h file and the values are assigned in the .cpp file. One of the advantages is that all strings etc are in one central place and everybody knows where to find them when something must be changed. This is especially something project managers seem to like as people come and go and this way everybody can change such trivial things without having to dig into the application's structure. Also, you can easily change the title of similar Group Boxes / Tab Pages etc at once. Another aspect is that you can just print that class and give it to a non-programmer who can check if the captions are intuitive, and if messages to the user are too detailed or too confusing etc. However, I see certain disadvantages: Every single class is tightly coupled to the constants classes Adding/Removing/Renaming/Moving a constant requires recompilation of at least 90% of the application (Note: Changing the value doesn't, at least for C++). In one of our C++ projects with 1500 classes, this means around 7 minutes of compilation time (using precompiled headers; without them it's around 50 minutes) plus around 10 minutes of linking against certain static libraries. Building a speed optimized release through the Visual Studio Compiler takes up to 3 hours. I don't know if the huge amount of class relations is the source but it might as well be. You get driven into temporarily hard-coding strings straight into code because you want to test something very quickly and don't want to wait 15 minutes just for that test (and probably every subsequent one). Everybody knows what happens to the "I will fix that later"-thoughts. Reusing a class in another project isn't always that easy (mainly due to other tight couplings, but the constants handling doesn't make it easier.) Where would you store constants like that? Also what arguments would you bring in order to convince your project manager that there are better concepts which also comply with the advantages listed above? Feel free to give a C++-specific or independent answer. PS: I know this question is kind of subjective but I honestly don't know of any better place than this site for this kind of question. Update on this project I have news on the compile time thing: Following Caleb's and gbjbaanb's posts, I split my constants file into several other files when I had time. I also eventually split my project into several libraries which was now possible much easier. Compiling this in release mode showed that the auto-generated file which contains the database definitions (table, column names and more - more than 8000 symbols) and builds up certain hashes caused the huge compile times in release mode. Deactivating MSVC's optimizer for the library which contains the DB constants now allowed us to reduce the total compile time of your Project (several applications) in release mode from up to 8 hours to less than one hour! We have yet to find out why MSVC has such a hard time optimizing these files, but for now this change relieves a lot of pressure as we no longer have to rely on nightly builds only. That fact - and other benefits, such as less tight coupling, better reuseability etc - also showed that spending time splitting up the "constants" wasn't such a bad idea after all ;-)

  Read the article

• Link mysql with php on apache

  - by Cristy

  THE STORY: I've installed Apache 2.2.17 , PHP 5.2.16 , MySQL 5.5.8 . The PHP woks great, the phpinfo() works on the localhost. THE PROBLEM: The thing is that in phpinfo() there is no mysql mentionened. I've done the following: moved php.ini to C:\windows removed the ";" in front of the mysql extension line ( extension=php_mysql.dll ) copied the libmysql.dll to php folder & windows\system32 checked the extension path in php.ini to be " C:\php\ext" searched the internet for a solution for about 2 hours... ADDITIONAL INFO: In the Apache Enviorment path I have the following: C:\Program Files (x86)\PHP\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\QuickTime\QTSystem\;C:\OJI\MinGWStudio\work\mingw\bin;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\; I think the Microsoft SQL path should be replaced with the MySQL one, but I don't know where to change that...

  Read the article

• Use wired LAN adapter by default

  - by Frantumn

  I am trying to find out if there's a way to set up network adapters so that if 2 are connected with network and internet access it will choose one over the other. Scenario: I have seen several computers running Windows 7 or Windows 8 where you are connected to a wireless network, working perfectly. Then when you plug in an Ethernet cable, it still shows the network icon in the taskbar as wireless. I would like to have my computer set up so that if there's an Ethernet cable plugged in, it uses that, and not the wireless adapter. 1) Is this possible / How? 2) Why does it stay on wireless over wired when given the option for both?

  Read the article

• A simple Volume Replication Tool for large data set?

  - by Jin

  I'm looking for a solution to the following: Server A (Site A) - Win 2008 R2 - approx 10TB (15TB max) of data - well over 8 million files Server B (Site B) - Win 2008 R2 I want to assynchronously replicate Server A's volume to a volume on Server B for data redundancy. Something that I can say to my users, "go here for data" when/if Server A goes belly up due to machine problems, disaster, etc. Windows 2008 R2 does have DFS, but microsoft does not apparently support this large of a dataset (or more accurately, more than 8 million files - according to the docs I could find). I also looked at Veritas Volume Replication, but this seems almost too much as I would also require Veritas Volume Manager. There are numerous "back-up" software which makes a 1-1 backup, which would be ok, but since it will be transfering over internet, I'd like something that has compression during transfer like DFS has. Does anyone have any suggestions regarding this?

  Read the article

• mdadm: brakes boot due to "is not ready yet or not present" error

  - by BarsMonster

  This is so damn frustrating :-| I've spent like 20 hours on this nice error, and seems like dozens of people over Internet too, and no clear solution yet. I have non-system RAID-5 of 5 disks, and it's fine. But during boot up it says that "/dev/md0 is not ready yet or not present" and asks to press 'S'. Very nice for Ubuntu Server - I have to bring monitor and keyboard to go next. After this system boots and it's all fine. md0 device works, /proc/mdstat is fine. When I do mount -a - it mounts this array without errors and works fine. As a dumb and shameful workaround I added noauto in /etc/fstab, and did mounting in /etc/rc.local - it works fine then. Any hints how to make it work properly? fstab: UUID=3588dfed-47ae-4c32-9855-2d69df713b86 /var/bigfatdisk ext4 noauto,noatime,data=writeback,barrier=0,nobh,commit=5 0 0 mdadm config: It is autogenerated: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR CENSORED # definitions of existing MD arrays ARRAY /dev/md/0 metadata=1.2 bitmap=/var/md0_intent UUID=efccbeb6:a0a65cd6:470dcdf3:62781188 name=LBox2:0 # This file was auto-generated on Mon, 10 Jan 2011 04:06:55 +0200 # by mkconf 3.1.2-2

  Read the article

• Connecting two pcs through cable, at the same time as wireless

  - by Steffen

  I've got 2 pcs setup with WLAN - however when I copy files between the machines it takes forever (obviously, since I run 801.11g). So I thought, why not just connect them directly with a cable (my wireless router is the other end of the house, that's why I don't use cables to that) However how should I configure the LAN connection on each machine, so I can use it for transferring files between them, whilst using my WLAN to access the Internet ? I was thinking about letting one machine be gateway, but then Windows pops up with a lot of warnings (basically it says this won't work when you're using two disjoint networks) And now I'm at a loss as to what to try.

  Read the article

• HTG Explains: What Are Computer Algorithms and How Do They Work?

  - by YatriTrivedi

    Unless you’re into math or programming, the word “algorithm” might be Greek to you, but it’s one of the building blocks of everything you’re using to read this article. Here’s a quick explanation of what they are, and how they work. Disclaimer: I’m not a math or computer science teacher, so not all of the terms I use are technical. That’s because I’m trying to explain everything in plain English for people aren’t quite comfortable with math. That being said, there is some math involved, and that’s unavoidable. Math geeks, feel free to correct or better explain in the comments, but please, keep it simple for the mathematically disinclined among us. Image by Ian Ruotsala Latest Features How-To Geek ETC How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Lucky Kid Gets Playable Angry Birds Cake [Video] See the Lord of the Rings Epic from the Perspective of Mordor [eBook] Smart Taskbar Is a Thumb Friendly Android Task Launcher Comix is an Awesome Comics Archive Viewer for Linux Get the MakeUseOf eBook Guide to Speeding Up Windows for Free Need Tech Support? Call the Star Wars Help Desk! [Video Classic]

  Read the article

• hdmi audio works only with aplay -D alsa test wavs; open source radeon drivers; kernel 3.5 vgaswitcheroo

  - by user108754

  I've trolled the internets to make hdmi work on my system Ubuntu 12.04 software center kernel 3.5 uname: Linux ubuntu 3.5.0-18-generic #29~precise1-Ubuntu SMP...x86_64 x86_64 x86_64 GNU/Linux open source radeon drivers vgaswitcheroo (hybrid intel/radeon gpu): I boot with intel, not radeon, running. (and recall that with kernel 3.5, vgaswitcheroo now gives info on a third item, "DIS-Audio"; it indicates pwr on my system) ( /etc/rc.local: chown user:user /sys/kernel/debug/ # change "username" with your user name echo OFF /sys/kernel/debug/vgaswitcheroo/switch ) grub indeed now has "radeon.audio=1" for testing audio, I did aplay -l which gave me the card and device, which made me try aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav and lo! I get crystal clear sound on my hdtv. If I play an mp3 file as the argument to that command, I get noise as, I guess, aplay interprets the mp3 code as a wav. If I play a .wav that is not in the /usr/share/sounds/alsa/ directory, I get nothing. Internet flash video in browser plays no sound over hdmi. Both system sounds control and pavucontrol have hdmi cedar selected. Alas, I can not get sound for any gui test (left, right). Why would only aplay, and only when directed with "-D plughw", yield sound over hdmi? I've also tried only using one sound program at a time, if it was a limitation of alsa, so I tried aplay with web browser and even the sound control gui closed. I tried each of the last two, running alone. No improvement. alsamixer only shows hda intel and I think it's only the intel audio, not the hdmi.

  Read the article

• Advice on new hardware firewall for a small company server-environment

  - by Mestika

  Hi everyone, My companies currently hardware firewall (an old ZyXEL ZyWALL firewall) and is indeed requiring an update to a new firewall. It is a small company with a similar small server-environment, so the need for a huge, complex and expensive solution isn’t there but a more “straight-forward” firewall, that can provide the necessary security to our systems and block unwanted elements from the core server and only accept access through our one server which is used as an “gateway” between the Internet and our internal network. I haven’t that much experience with hardware firewalls so I’m requesting any good advice and/or knowledge on which products will be suited for our specific need. If you need more information about the specific needs we require, please let me know and I’ll provide them to you. Sincerely - Mestika

  Read the article

• Issues connecting to WPA2 with User Authentication Mavericks?

  - by heinst

  I was on all the builds of the Mavericks beta and connecting to my University's network was fine. Then I upgraded to the public release and now I can't seem to connect to the internet. I can connect to other networks, but not my schools. Its a WPA2 network with a User Authentication. And my MacBook is a 2011? 2.2 GHz first gen i7 Quad Core with 8 GBs of RAM. Does anyone else have the same issue? Any tips on how to fix it? Thanks! heinst

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• Non existing GPO applying? WSUS

  - by Jake

  I recently took my WSUS server offline. In the mean time I want the clients to update from the internet until I get WSUS up again. However, Windows Updates is tring to contact the old server and (obviously) failing to get new updates. I have updated the WSUS GPO to disabled. Checked DNS is resolving. Deleted WSUS GPOs. GPRESULT reports that policy is not being applied Run GPUPDATE /force No issues reported from DCDIAG I delete the registry keys HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate But the keys return after a reboot. What else can I try ?

  Read the article

• Setup IIS 7 as FTP Server that is connectable outside of my local network

  - by Usta

  I was able to setup an FTP site that I was able to access via ftp://127.0.0.1/ or my local(static) ip. To do this I followed these instructions (with the exception that I did not bind to 127.0.0.1 as suggested) http://learn.iis.net/page.aspx/301/creating-a-new-ftp-site-in-iis-7/ I have created a firewall exception for port 20 and 21, and setup port-forwarding on my wireless router. But I can only access the site via local-host, and I need to have a friend have read access to it. So how do I enable remote access to it? (I'd rather not purchase a domain-name) My setup: IIS 7.5 Windows 7 Professional Wireless Network Norton Internet Security 2012 An Internal Static IP Address

  Read the article

• Is there an apache module to slow down site scans?

  - by florin

  I am administering a few web servers. Each night, random hosts from the Internet are probing them for various vulnerabilities in php, phpadmin, horde, mysqladmin, etc. Is there a way (apache plugin?) to slow down the rate of attack? For SSH, I have a rate limiting rule on the firewall, which does not allow more than three connections per minute. But I don't want to rate limit all HTTP access, only the access that returns 404s. Is there such an apache module?

  Read the article

• FreeNAS - how to "Exclude from file" in Rsyncd (GUI)

  - by user179181

  I am trying to set rsync tasks to Pull user profiles from 11 Windows machines running DeltaCopy Server and then configure ZFS periodic snapshot tasks for a backup solution. So far this has been working fine, although i would like to exclude certain file types like .DAT or NTUSER.DAT. My Exclusion file resides on the local ZFS Dataset (Receiving side) and is as follows: Temp Temporary Internet Files NTUSER.DAT NTUSER.DAT.LOG *.dat *.tmp *.DAT.log *.ost *.pst The command i typed under Auxiliary Parameters (Rsyncd Global Conf under services)is as follows: exclude from = /mnt/Storage/User_Profiles/exclude.txt Ive tried deleting the .DAT files from the receiving end and just as i start to get excited i click refresh and there they are again

  Read the article

• Determine which software product a Microsoft Product Key activates

  - by druciferre

  Without a product key being labelled, is there is any way to identify what Microsoft software product a given product key is meant to activate? Let's say for example I had the product key ABCDE-FGHIJ-KLMNO-PQRST-UVWXY, but I had no clue if was meant for Windows 7 Ultimate, Windows 7 Home Premium, Vista Ultimate, or even Office 2010. Does Microsoft (or anyone for that matter) have any kind of tool that I could paste the key into and get a result that identifies the software product the key is meant for (or at least a good estimate)? Note: I have searched and searched many times on the Internet, but the only results I ever find are how to recover a lost product key by using something like Nirsoft ProduKey. This is not what I am looking for.

  Read the article

• How do I share a complete XP disk so it can be seen from a Windows 7 system?

  - by Ian Ringrose

  This should be easier! (both computers can see the internet etc so I know the network it’s self is working) I have a normal home network with a Windows XP machine on it and the new Windows 7 (64 bit) machine. So I can transfer the files to the new Windows 7 machine, I wish to share the complete disk (and all files) from the Windows XP machine and access them from the Windows 7 machine. Is there a step by step set of instructions for doing this anywhere? So fare I have: put both computers into the same workgroup put the windows 7 machine into work network mode so it can see the XP machine in the work group shared the XP disk as read only But when I try to access a lot of the folders on the XP disks, I am told I am not allowed to access them. (I was not asked for any passwords by the windows 7 machine when I accessed the XP machine. The XP machine just has its default account with no password set on it)

  Read the article

• How can I restrict SSH access when the source IP is dynamic

  - by Supratik

  Hi I want to protect SSH access to our live web server from all IP's except our office static IP. There are some employees who connects to this live server from their dynamic IP's. So, it is not always possible for me to change in the iptables rule in live server whenever the dynamic IP of the employee changes. I tried to put them in office VPN and allowed only SSH access from office IP but the office connection is slow in compared to our employee's private internet connection, moreover it adds an extra overhead to our office network. Is there any way I can solve this problem ?

  Read the article

< Previous Page | 791 792 793 794 795 796 797 798 799 800 801 802  | Next Page >