Search Results

Search found 30871 results on 1235 pages for 'click ok'.

Page 797/1235 | < Previous Page | 793 794 795 796 797 798 799 800 801 802 803 804  | Next Page >

• Put one monitor of a dual monitor windows system into standby

  - by Psycogeek

  Standby not Disabled! When running 2 monitors on windows 7 or Windows XP, I would like to be able to put one of the monitors at a time into standby. The method can be manual. When running 2 monitors , the second monitor is not always needed, shutting off the monitors own power switch will turn off the monitor, that does work Ok. Problems with that are , the delay with the monitor logo at turn on, and the power switch is not very accessable, and the switch might not live forever turning it on and off so many times. Using disable methods like devcon, WIN-P and Display, causes all the windows to properly move to the other monitor. While that is what a person would want to happen so they can get hold of the windows, that is not what I want to happen, and some things on the other monitor have to be re-arranged after a re-enable. By putting it into standby mode, nothing changes other than the monitor going into standby. Disconnecting the DVI cable still can cause the system to (properly) shift all the windows over to the one monitor, just like any of the disable methods do. That makes a mess of the windows, and is so unacceptable, that I would prefer to leave the monitor on, wasting power and the hardware, when it could easily go into standby for some time. For both monitors I am using a "MonitorOff" program that puts both monitors into standby, but I can not find a utility that will put only ONE monitor into standby for the windows system. If someone comes along and suggests "ultramon" you must know for a fact that it will put One of either of the monitors into actual standby. And it does not really suit me to use ultramon, I tested it (it was nice) and I did not feel that it was a program I wanted. The 2 monitors are running off of an ATI 4890 card, they are both hooked up DVI-I, the OS is both Windows 7 (primary) and Windows XP. In addition it would also be interesting to have seperate standby activity timers, and follow mouse kind of standby changes, but any manuel method , shortcut, batch , tray, or gadget kind of operation would be a good start.

  Read the article

• Force Windows Local Subnet Traffic through a Gateway

  - by Beerey

  Hi all, We are attempting to route all traffic from a certain machine to a gateway. This works ok for traffic destined for subnets outside of the machine's subnet. However, traffic to machines in the same subnet as the source machine goes through an On-Link gateway in Windows. This means that the default gateway is ignored, and traffic in a subnet (for example, 192.168.50.10 - 192.168.50.11) flows. Destination Netmask Gateway Interface Metric 192.168.50.0 255.255.255.0 On-link 192.168.50.214 276 This route can be deleted from Windows, but when the machine is rebooted it always comes back. Adding a persistant static route to the gateway with a lower metric doesn't work, since it will still try the On-Link gateway after the persistant route fails. Adding each machine in a VLAN isn't an option due to the setup we have Adding a startup script to delete the gateway isn't a great option either, since users will have full admin access to the machine and might disable the script. We cannot transperantly intercept all network traffic on the subnet using Gratuitous ARPs or transparent proxying, since there are other machines on the subnet which use a different gateway The only way we have gotten it to work is by adding a persistant route to the gateway for the subnet traffic, and deleting the On-link route on reboot. The question is then. Is there a way to permanently remove this On-link route If not, is there a way to otherwise force even local subnet traffic to go through a gateway?

  Read the article

• Which httpd.conf and php.ini files does plesk use

  - by Saif Bechan

  If i disable the include_path in /etc/php.ini, i can still see that there is an include path loaded from somewhere. I want to know where this file is. If i use phpinfo(); on my domain i get that there is a include path /usr/share/pear:/usr/share/php, even though in the php.ini i used: ;inlucde_path=".:" In the section for aditional php.ini files this is the list: /etc/php.d/curl.ini, /etc/php.d/dbase.ini, /etc/php.d/dom.ini, /etc/php.d/gd.ini, /etc/php.d/imap.ini, /etc/php.d/json.ini, /etc/php.d/mbstring.ini, /etc/php.d/mysql.ini, /etc/php.d/mysqli.ini, /etc/php.d/pdo.ini, /etc/php.d/pdo_mysql.ini, /etc/php.d/pdo_sqlite.ini, /etc/php.d/wddx.ini, /etc/php.d/xmlreader.ini, /etc/php.d/xmlwriter.ini, /etc/php.d/xsl.ini, /etc/php.d/zip.ini I have checked all these files but i can nowhere find a reference to pear. This said the /etc/httpd/conf/httpd.conf file is questioning to me too. If i check this file i can see the following values are defined. DocumentRoot "/var/www/html" <Directory /> Order Deny,Allow Deny from all Options None AllowOverride None </Directory> <Directory "/var/www/html"> Options None AllowOverride None Order allow,deny Allow from all </Directory> The strange thing is that i don't even use this directory, so where does plesk get his httpd.conf file from. I want to check if everything is ok, because my vhost.conf is not working. I don't know if i should change these values or not, and where i can find the values plesk uses. i hope someone can help me with this.

  Read the article

• unreadable corrupted ntfs partition - lost clusters reported

  - by Eduardo Martinez

  partition magic is reporting multiple 'bad file record signature' and 'lost clusters' errors on my 250GB samsung sata disk (connected via usb on a xp sp3). Unfortunately PM is unable to fix. PM shows the drive as being NTFS, detects used space ok and also drive name. But PM browser (right click on partition, browse...) won't show anything (as if disk was empty) Windows Explorer is not even picking the drive name and reports 'the file or directory is corrupted and unreadable' PTDD partition table doctor demo tells me the boot sector is fine, and I can see all disk content on its browser - but crucially cannot copy that content over to a new disk (PTDD browser is pretty arid to say the least) Also tried - photorec-6.11.3 - it actually started to extract files but wouldn't keep file names or any folder structure (maybe I missed sth on the configuration options) - find and mount - intellectual scan went well, the only partition on the disk was detected, then tried to mount into p: but got this error on windows explorer: 'p:\ is not accesible. The media is write protected'. Find and mount allows you to create an image from partition but I don't have a disk big enough at hand. Does anyone know if this will keep the extracted files/folders structure intact? I'm starting to think the disk is pretty screwed and my chances to recover this data are slim. Please someone enlighten me with that marvellous piece of software I am missing :-) Thanks in advance

  Read the article

• MacBook Pro screen flickers, and lines appears after using it a while

  - by Adam L. S.

  My aunt gave me her old MacBook Pro, but unfortunately it has a few issues. The main problem is that lines appears after I use it with applications that heavily depend on graphics, but they don't necessarily appear in that window. I also figured out that these lines appear with the windows, so the cursor goes over the lines, and menus and other windows also overlap them. If I take a screenshot of the window by itself, no lines appear. It seems obvious to me that this is a driver-related problem. Unfortunately, there are no updates or anything for the driver. At first I tried asking for a solution at Apple's forum, but they were only able to figure out that "something is wrong with the video card". I checked the MacBook with an Ubuntu disk, and the screen seemed OK. I've uploaded some photos to my Picasa account to show the symptoms. Recently, I've also noticed the screen flickering when using applications that need high performance graphics, like games. Also, the MacBook Pro came with Mac OS X Tiger, but she upgraded it to Leopard (she only brought the Tiger disk with her.) What can I do with this?

  Read the article

• Triple boot WIndows 7, Windows 8, and Mountain Lion on Macbook Pro

  - by Nathan

  Ok, So I have a bit of a unique situation here I could use some help on. I've modded my summer 2011 MBPro to have 2 harddrives by replacing the optical drive. OSX Mountain Lion is installed on a single partition of a 120GB SSD. The second drive is 750GB, partitioned as 550GB, 150GB, and ~50GB. I've set the 550GB to act as my OSX homefolder, but I'd like to install windows 7 and Windows 8 on the remaining partitions. It Took a while, but by following this guide, I eventually found a way to install Windows without a CD/DVD drive by following this http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdrive-with-virtualbox/ It worked flawlessly for creating both windows 7 and windows 8 images that I could clone onto FAT32 partitions. However, I have encountered a problem when trying to triple boot. After I put Windows 8 onto the ~50GB partition and tried to boot into windows 7 I get an error that says something like: error: 0x0000000e The Boot selection failed because the required device is inaccessible. If I re-clone the windows 7 image onto the drive and select the option to "replace BCD" file for the drive, windows 7 will boot but windows 8 now gives me the same exact error. I realize this is a pretty extensive setup, but if anyone has some insight I'd love to hear it.

  Read the article

• Unable to install Perl Crypt::OpenSSL::RSA module, please help

  - by Willy

  Hi Everyone, I spent several hours but unable to install CPAN Crypt::OpenSSL::RSA module. It's required for Postfix's dkimproxy add-on. What I do is to run the following command in the shell: $ perl -MCPAN -e 'install Crypt::OpenSSL::RSA' When I run this command, several lines displayed and at the end, this is displayed: Checking if your kit is complete... Looks good Warning: prerequisite Crypt::OpenSSL::Random 0 not found. Writing Makefile for Crypt::OpenSSL::RSA ---- Unsatisfied dependencies detected during [I/IR/IROBERTS/Crypt-OpenSSL-RSA-0.26.tar.gz] ----- Crypt::OpenSSL::Random Shall I follow them and prepend them to the queue of modules we are processing right now? [yes] Then I hit enter (yes) and tens of lines generated with error. At the end I get this: ... ... RSA.xs:579: warning: implicit declaration of function ‘RSA_sign’ RSA.xs:579: error: ‘rsaData’ has no member named ‘hashMode’ RSA.xs:579: error: ‘rsaData’ has no member named ‘hashMode’ RSA.xs:579: error: ‘rsaData’ has no member named ‘rsa’ RSA.xs: In function ‘XS_Crypt__OpenSSL__RSA_verify’: RSA.xs:605: error: ‘rsaData’ has no member named ‘rsa’ RSA.xs:610: error: ‘rsaData’ has no member named ‘hashMode’ RSA.xs:611: warning: implicit declaration of function ‘RSA_verify’ RSA.xs:611: error: ‘rsaData’ has no member named ‘hashMode’ RSA.xs:613: error: ‘rsaData’ has no member named ‘hashMode’ RSA.xs:616: error: ‘rsaData’ has no member named ‘rsa’ RSA.xs:619: warning: implicit declaration of function ‘ERR_peek_error’ RSA.xs: In function ‘boot_Crypt__OpenSSL__RSA’: RSA.xs:214: warning: implicit declaration of function ‘ERR_load_crypto_strings’ make: *** [RSA.o] Error 1 /usr/bin/make -- NOT OK Running make test Can't test without successful make Running make install make had returned bad status, install seems impossible What am I doing wrong? Please guide me. Thanks.

  Read the article

• Apache reaching MaxClients and locking the server

  - by Rodrigo Sieiro

  Hi. I currently have an Apache2 server running with mpm-prefork and mod_php on a OpenVZ VPS with 512M real / 1024M burstable RAM (no swap). After running some tests, I found that the maximum process size Apache gets is 23M, so I've set MaxClients to 25 (23M x 25 = 575 MB, ok for me). I decided to run some load tests on my server, and the results left me puzzled. I'm using ab on my desktop machine requesting the main page from a wordpress blog. When I run ab with 24 concurrent connections, everything seems fine. Sure, CPU goes up, free RAM goes down, and the result is about 2-3s response time per request. But if I run ab with 25 concurrent connections (my server limit), Apache just hangs after a couple of seconds. It starts processing the requests, then it stops responding, CPU goes back to 100% idle and ab times out. Apache log says it reached MaxClients. When this happens, Apache keeps itself locked up with 25 running processes (they're all in "W" if I check server status) and only after the TimeOut setting the processes start to die and the server starts responding again (in my case it's set to 45). My question: is that expected behaviour? Why Apache just dies when it reaches MaxClients? If it works with 24 connections, shouldn't it work with 25, just taking maybe more time to respond each request and queueing up the rest? It sounds kinda strange to me that any kid running ab can alone kill a webserver just by setting the concurrent connections to the servers MaxClients.

  Read the article

• Cachefilesd (cachefiles) everything seems to be set up, still not working

  - by Evgenius

  I'm trying to set up cachefilesd to work with my network folder shared using NFS. I have seemingly everything set up, however cachefilesd starts normally, however caching isn't functioning. Here is output of commands, which I ran in the same order 1 sudo mount ... cache-1:/mnt/datashared on /mnt/nfsshare type nfs (rw,sync,ac,acregmin=3,acregmax=60,acdirmin=30,acdirmax=300,lookupcache=pos,vers=3,fsc) ... 2 lsbmod | grep cachefiles cachefiles 40555 1 fscache 57430 4 nfs,cifs,cachefiles,nfsv4 3 [edited - deleted] 4 uname -r 3.8.0-34-generic 5 grep CONFIG_NFS_FSCACHE /boot/config-3.8.0-34-generic CONFIG_NFS_FSCACHE=y 6 lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 13.04 Release: 13.04 Codename: raring 7 sudo service cachefilesd restart * Restarting FilesCache daemon cachefilesd [ OK ] 8 dmesg [6211206.141781] FS-Cache: Withdrawing cache "mycache" [6211210.135236] FS-Cache: Cache "mycache" added (type cachefiles) [6211210.135242] CacheFiles: File cache on sdb1 registered [6214644.348929] CacheFiles: File cache on sdb1 unregistering [6214644.348935] FS-Cache: Withdrawing cache "mycache" [6214654.575909] FS-Cache: Cache "mycache" added (type cachefiles) [6214654.575915] CacheFiles: File cache on sdb1 registered 9 ps aux | grep cachefilesd root 65399 0.0 0.0 4460 540 ? Ss 23:14 0:00 /sbin/cachefilesd 1000 65464 0.0 0.0 8160 916 pts/0 S+ 23:16 0:00 grep --color=auto cachefilesd finally, biggest problem is 10 cat /proc/fs/nfsfs/volumes NV SERVER PORT DEV FSID FSC v3 64476645 801 0:24 233e020f0da07a93 no tl;dr I think I configured everything properly but FSC mount option + fscachefilesd don't seem to work

  Read the article

• Create SAMBA node trust relationship to Windows 2003 PDC server

  - by Rod Regier

  I am having problems creating a trust relationship between an OpenVMS/IA64 node running V/IA64 8.3-1H1, TCPIP 5.6 ECO 5, CIFS 1.1 ECO1 PS11 (SAMBA 3.0.28a) and Windows 2003 server running as a PDC. I do have two other OpenVMS/Alpha nodes running V/A 8.3, TCPIP 5.6 ECO 4, CIS 1.1 ECO1 PS10 (SAMBA 3.0.28a) with working trust relationships to the same Windows 2003 server. Looking for assistance in resolving the trust "handshake". \\ Details from failing node. Unless otherwise noted, corresponding files on working nodes are similar or identical. SMB.CONF extract: [global] server string = Samba %v running on %h (OpenVMS) workgroup = WILMA netbios name = %h security = DOMAIN encrypt passwords = Yes name resolve order = lmhosts host wins bcast Password server = * log file = /samba$log/log.%m printcap name = /sys$manager/ucx$printcap.dat guest account = DYMAX print command = print %f/queue=%p/delete/passall/name="""""%s""""" lprm command = delete/entry=%j map archive = No printing = OpenVMS net rpc testjoin [2010/08/13 16:09:28, 0] SAMBA$SRC:[SOURCE.RPC_CLIENT]CLI_PIPE.C;1:(2443) get_schannel_session_key: could not fetch trust account password for domain 'WILMA' [2010/08/13 16:09:28, 0] SAMBA$SRC:[SOURCE.UTILS]NET_RPC_JOIN.C;1:(72) net_rpc_join_ok: failed to get schannel session key from server W2K3AD2 for domain WILMA. Error was NT_STATUS_CANT_ACCESS_DOMAIN_I NFO Join to domain 'WILMA' is not valid net rpc join "-Uaccount%password" tdb_open_isam: error verifying status of file SAMBA$ROOT:[PRIVATE]secrets.tdb tdb_open_isam: errno value = 1 [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.PASSDB]SECRETS.C;1:(72) Failed to open /SAMBA$ROOT/PRIVATE/secrets.tdb [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.UTILS]NET_RPC.C;1:(322) error storing domain sid for WILMA tdb_open_isam: error verifying status of file SAMBA$ROOT:[PRIVATE]secrets.tdb tdb_open_isam: errno value = 1 [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.PASSDB]SECRETS.C;1:(72) Failed to open /SAMBA$ROOT/PRIVATE/secrets.tdb [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.UTILS]NET_RPC_JOIN.C;1:(409) error storing domain sid for WILMA Unable to join domain WILMA. \\ Example from other node: net rpc testjoin Join to 'WILMA' is OK

  Read the article

• Problem with creation of scheduled task from IIS6 on SR2003

  - by Morten Louw Nielsen

  Hi, I have also posted this question on stackoverflow, but will also try here, since it might be more system-related I am writing a webapplication using .NET. The webapp creates scheduled tasks using the System.Diagnostics.Process class, calling SCHTASKS.EXE with parameters. I have changed the identity on the app pool, to a specific domain user. The domain-user is local administrator on all the four webservers. From webserver01 I am creating tasks on webserver01 to webserver04. It works perfect for 3-5 days, but then it breaks. It gives me the following errormessage in a messagebox: "The application failed to initialize properly (0xc0000142). Click on OK to terminate the application." If I have the system in the broken state, and I change the identity of the app pool to Domain administrator, it works. As I change it back to my domain-user, it breaks again. If I reboot the server, it works again for the same amount of days, but will break again. It seems like a permission-related problem. I just don't understand why it works sometimes, and sometimes doesn't. I hope someone outthere has seen this problem! Looking forward to hear from you! Kind regards, Morten, Denmark

  Read the article

• Apache, Tomcat 5 and problem with HTTP basic auth

  - by Juha Syrjälä

  I have setup a Tomcat with a webapp that uses http basic auth in some of its URLs. There is a Apache server in front of the Tomcat. I have setup Apache as a proxy like this (all traffic should go directly to tomcat): /etc/httpd/conf.d/proxy_ajp.conf: LoadModule proxy_ajp_module modules/mod_proxy_ajp.so ProxyPass / ajp://localhost:8009/ ProxyPassReverse / ajp://localhost:8009/ There is a webapp installed to root of Tomcat (ROOT.war), so I should be able to use http://localhost/ to access my webapp. But it is not working with http basic auth. The problem is that everything works until I try to access URL that are protected by the HTTP basic auth. URLs without authentication work just fine. When accessing this url via apache I am getting an error message from Apache. If I access the same URL directly from tomcat, everything works just fine. I am getting this to Apache error log: [Wed Sep 01 21:34:01 2010] [error] proxy: dialog to [::1]:8009 (localhost) failed access log looks like this: ::1 - - [01/Sep/2010:21:34:01 +0300] "GET /protected_path/ HTTP/1.0" 503 360 "-" "w3m/0.5.2" I am using: Fedora release 13 (Goddard) httpd-2.2.16-1.fc13.x86_64 tomcat5-5.5.27-7.4.fc12.noarch The basic auth is implemented in the webapp (not in Apache or Tomcat). The webapp is actually implemented in Scala/Lift, but that shouldn't matter. The auth works if I access the tomcat directly. Error message that I am getting from Apache. It is curious that the title is Unauthorized and not Internal error: Unauthorized The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later. Apache/2.2.16 (Fedora) Server at my.server.name.com Port 80 It could be that Apache is seeing a some thing else than 200 OK response and thinks that it is an error when it actually should pass the received 401 Unauthorized response directly to browser. If this is the problem, how to fix it?

  Read the article

• Catastrophic Failure opening ODBC via Citrix

  - by Joshdan

  We recently had our Citrix server crash unexpectedly. When it came back up, there was a new issue -- every ODBC connection fails with "Catastrophic Failure" (0x8000FFFF). The issue is limited to Citrix / ICA connections; logging in as the same user via RDP works as usual. The following code is my minimal test case (for wscript): ''// test_odbc.vbs strConn = "Driver={Microsoft Text Driver (*.txt; *.csv)};Dbq=c:\files\;" Set rs = CreateObject("ADODB.recordset") strSQL = "SELECT * FROM myFile.csv" wscript.echo "Press OK to Test" ''// This line breaks over Citrix, but not over Terminal Services ''// ---------------------- rs.open strSQL, strConn, 3,3 ''// ---------------------- wscript.echo rs("a") Any insight would be greatly appreciated. Windows Server 2003 SP1, Citrix MetaFrame Presentation Server 4.0. Clients include at least versions 10.2-11 running on 2000-Vista, OS X. ODBC error happens whether a DSN is used or not, on at least Access, MS-SQL, and CSV. Connections both through the SSL Gateway and directly. There have been a few users actually able to log in without trouble, but I can't pin down anything special about them.

  Read the article

• Debian Squeeze and exim4: cannot send mail

  - by Fernando Campos

  Hello guys, Got this error after install and config of exim4-daemon-light and mailutils packages on Debian Squeeze. This package is aimed to send automatic messages from websites, like email confirmation and stuff. Configuration after package install: dpkg-reconfigure exim4-config You'll be presented with a welcome screen, followed by a screen asking what type mail delivery you'd like to support. Choose the option for "internet site" and select "Ok" to continue. After many configuration sceens you can test mail with: echo "test message" | mail -s "test message" [email protected] Here is the response: root@server:/etc# echo "test message" | mail -s "test message" [email protected] 2011-03-02 20:34:59 1PuxRT-0001Aj-T9 Cannot open main log file "/var/log/exim4/mainlog": Permission denied: euid=101 egid=103 2011-03-02 20:34:59 1PuxRT-0001Aj-T9 <= root@debian U=root P=local S=331 2011-03-02 20:34:59 1PuxRT-0001Aj-T9 Cannot open main log file "/var/log/exim4/mainlog": Permission denied: euid=101 egid=103 exim: could not open panic log - aborting: see message(s) above Can't send mail: sendmail process failed with error code 1 There is no /var/log/exim4 directory on my server. I tried to create it, but it didn't work. Please, can someone help me? Best regards, Fernando

  Read the article

• Linux Distro for Beginners

  - by XLR3204S

  Well... I know that's the question arising all over the Internet, but I couldn't find an answer to suit me after googling for quite some time. I'd like to get a Linux distribution, and start learning using the CLI. I'm looking for a distribution already having GNOME installed, as I'll be using Linux-Command.org as my learning resource, and I'm not very familiar with CLI-based web browsers. I'd mainly like to get to know my way around a UNIX-based system, and then I think I'd like to pick up a CLI-only distribution, and start doing more complex stuff. I've tried Ubuntu, Fedora Core, OpenSolaris and FreeBSD (the last two aren't linux distros, I know). Ubuntu and FC are fine, they do come with Firefox, but I'm not really sure they're meant for learning purposes. OpenSolaris was OK as well, but I haven't got to play with it enough. FreeBSD 7.2 did not want to install itself on my 13" MacBook Pro, it generated a kernel panic everytime while copying the files to the disk. So to sum this up, I'm trying to learn Linux, and I'm willing to invest time into this (that is, not giving up when the first problems arise). I also have intermediate knowledge of C++, if it helps, and I'm also using the CLI-vim to write small C++ CLI-based programs, so text editing should be any problem. And... speaking of Macs, how am I going to be limited if I try to learn how to use UNIX-based systems using the OS X Terminal? It uses bash 3.2, isn't this the same shell as the one found on most of the Linux machines? How does the fact that OS X is based on FreeBSD 4.4, if I'm not mistaking, affect this? Thanks in advance, and hopefully, I'll have a starting point ASAP.

  Read the article

• Nagios plug-in check_snmp receives NO SNMP data from a CISCO Router

  - by Shehryar

  I have tried setting up Nagios on Ubuntu 10.10, successfully installed and can login to web interface, I am however stuck on configuring snmp or I am doing something wrong here, i have followed various sites / nagios wiki to setup configuration (cfg) files. When I check on the web interface, it gives the following error on one of my cisco router: Current Status: UNKNOWN (for 0d 2h 55m 56s) Status Information: SNMP problem - No data received from host CMD: /usr/bin/snmpget -t 1 -r 5 -m RFC1213-MIB -v 1 [authpriv] 192.168.1.1:161 ifOperStatus.1 On the command-line itself, when I type the following, it just sits there waiting and waiting : sudo /usr/local/nagios/libexec/check_snmp -H 192.168.1.1 -C Routers -o sysUpTime.0 When I type the following command : I get an OK /usr/bin/snmpget -v1 192.168.1.1:161 1.3.6.1.2.1.1.5.0 -c "Routers" I have configured SNMP properly on our cisco device as we can collect SNMP Data via two other monitoring tool (SolarWinds and Manage Engine), we are tempted towards Nagios as its opensource. Will be grateful if someone could assist in rectifying this situation and guide me with setting up nagios to monitor Cisco Routers, Switches and a Few Servers. We want to monitor Bandwidth, cpu utilization, uptime and other necessary counters. Will be grateful for your assistance Thanks for reading Shehryar

  Read the article

• Installer not being updated ( probably because of Windows 7 file cache )

  - by Sithu Kyaw

  I'm creating an installer for my Visual FoxPro application using ISTool and Inno Setup. It is ok for me for the first time. But, I updated my code and re-built the EXE file. Then, compiled the installer again. I found that my update was not compiled into the installer and I did not see the update in my running application. I noticed that the EXE file, which was built by VFP, was updated properly. It seems the installation script did not output the updated file. But, when I changed folder names, it did work. I don't want to change folder names whenever I run that installation script. It is not a good idea actually. I think it is because of Windows 7 cache system. Mine is Windows 7 Home Premium Service Pack 1. For example, My previous output file is located at C:\path\to\myinstaller.exe When I compile the installation script, the output file there should be overwritten, but it was not as expected. Although I deleted the file, it did not work. When I changed to output file path as C:\newpath\to\myinstaller.exe, I got the fix, but it is not a solution what I'm looking for. Does anyone how to do that? [Edit] I found that the installed directory was not updated properly. For example, I installed the program to C:\Program files\MyInstalledApp When I run the installer again, that installation directory should be overwritten, but failed. Thus, I got to uninstall the app before I re-install it. Is there any fix for this?

  Read the article

• Apache MaxClients reaching max and locking the server

  - by Rodrigo Sieiro

  Hi. I currently have an Apache2 server running with mpm-prefork and mod_php on a OpenVZ VPS with 512M real / 1024M burstable RAM (no swap). After running some tests, I found that the maximum process size Apache gets is 23M, so I've set MaxClients to 25 (23M x 25 = 575 MB, ok for me). I decided to run some load tests on my server, and the results left me puzzled. I'm using ab on my desktop machine requesting the main page from a wordpress blog. When I run ab with 24 concurrent connections, everything seems fine. Sure, CPU goes up, free RAM goes down, and the result is about 2-3s response time per request. But if I run ab with 25 concurrent connections (my server limit), Apache just hangs after a couple of seconds. It starts processing the requests, then it stops responding, CPU goes back to 100% idle and ab times out. Apache log says it reached MaxClients. When this happens, Apache keeps itself locked up with 25 running processes (they're all in "W" if I check server status) and only after the TimeOut setting the processes start to die and the server starts responding again (in my case it's set to 45). My question: is that expected behaviour? Why Apache just dies when it reaches MaxClients? If it works with 24 connections, shouldn't it work with 25, just taking maybe more time to respond each request and queueing up the rest? It sounds kinda strange to me that any kid running ab can alone kill a webserver just by setting the concurrent connections to the servers MaxClients.

  Read the article

• 426 Connection closed; transfer aborted.

  - by Jiaoziren

  Hi, I have an IIS FTP set up on Windows 2003 SP2 (S1). Everyday in the early morning, a script on another server (S2) will run and initiate FTP transfer of pulling log files from S1 to S2. The FTP client we're using is built-in FTP.exe in Windows 2000 on S2. Recently we replaced S1 with a new server however we kept the IP address. There are multiple IP addresses on new S1. Ever since the new S1 was in place, the '426 Connection closed; transfer aborted.' errors haven been occuring randomly. The log indicated that the transfer started ok however the file cannot be transferred completely, as per log below: mget access*.log 200 Type set to A. 200 PORT command successful. 150 Opening ASCII mode data connection for access02232010.log(205777167 bytes). 426 Connection closed; transfer aborted. ftp: 20454832 bytes received in 283.95Seconds 72.04Kbytes/sec. The firewall monitor suggested that the connection was setup in passive mode however I've been told that MS FTP.exe doesn't support passive mode. Though I can see the response of 'entering passive mode' from server when typing in 'quote pasv'. My network admin has told me to try the transfer in active mode however I don't know how to open active mode on client side. It's getting really frustrating. Wish someone here has the right knowledge/experience could shed me a light. Cheers.

  Read the article

• OCZ Vertex 3 SSD boot failure

  - by Col Zero

  Ok, so I just purchased and received a 120GB OCZ Vertex 3. I had Windows 7 on an .ISO file on my computer. I formatted a USB stick and configured it to be read as a CD so that I could install windows onto my SSD from it. I started my comp, had the boot priority set to my USB, starting installing windows 7 to my SSD. And out of no where (I wasn't watching) my computer restarted and it brought me back to the beginning of the Windows 7 set-up. So I turned my computer off and booted it up from the SSD to see if it had installed onto the SSD. The first 2 attempts I had a disk boot failure. So I plugged my hard drive back in, started my computer, turned it off, plugged the SSD back in (literally) and it booted up fine/ Finalized windows got internet set up, and Windows had updates that required a restart. So I restarted and had another disk boot failure. Now I have a disk boot failure every time I try to start my computer up through my SSD. Extra Info: My SSD has never been able to be detected in my BIOS unless my Hard Drive was unplugged (eve then my BIOS didn't always detect it). MY SSD wasn't detected in my BIOS the first and only time it successfully booted up. My SSD literally boots up successfully randomly (only once unfortunately) and is detected in my BIOS randomly. I've tried switching cords etc and nothing has worked. I just want to get this damn thing running so I can see whats its like. I finally found a way to get the OS on this sucker and now it won't even boot up. Any help appreciated

  Read the article

• WAMP vhost issues with all vhost pointing to the first vhost statement

  - by Rick

  I am trying to setup vhosts in WAMPSERVER and I am running into an issue where all sites are pointing to the first vhosts and not delegating properly. Has anyone had this issue? Here is my setup. In windows hosts file: 127.0.0.1 siteabc.local 127.0.0.1 sitexyz.local In httpd-vhosts.conf: <VirtualHost 127.0.0.1> DocumentRoot "C:\Users\Rick\Documents\Projects\siteabc" ServerName siteabc.local ErrorLog "logs/siteabc-error.log" CustomLog "logs/siteabc-access.log" common <Directory "C:\Users\Rick\Documents\Projects\siteabc"> Options Indexes FollowSymLinks AllowOverride all Order Deny,Allow Allow from all </Directory> </VirtualHost> <VirtualHost 127.0.0.1> DocumentRoot "C:\Users\Rick\Documents\Projects\sitexyz" ServerName sitexyz.local ErrorLog "logs/sitexyz-error.log" CustomLog "logs/sitexyz-access.log" common <Directory "C:\Users\Rick\Documents\Projects\sitexyz"> Options Indexes FollowSymLinks AllowOverride all Order Deny,Allow Allow from all </Directory> </VirtualHost> <VirtualHost 127.0.0.1> DocumentRoot "C:\Users\Rick\Documents\Projects" ServerName localhost ErrorLog "logs/localhost-error.log" CustomLog "logs/localhost-access.log" common <Directory "C:\Users\Rick\Documents\Projects"> Options Indexes FollowSymLinks AllowOverride all Order Deny,Allow Allow from all </Directory> </VirtualHost> Ok so from this setup going to siteabc works...but going to sitexyz, it still goes to siteabc. Not sure what I did wrong here. Thanks for looking.

  Read the article

• mod_rewrite: redirect from subdomain to main domain

  - by Bald

  I have two domains - domain.com and forum.domain.com that points to the same directory. I'd like redirect all request from forum.domain.com to domain.com (for example: forum.domain.com/foo to domain.com/forum/foo) without changing address in addres bar (hidden redirect). I wrote something like this and put it into .htaccess file: Options +FollowSymlinks RewriteEngine on RewriteCond %{HTTP_HOST} ^forum\.example\.net$ RewriteRule (.*) http://example.com/forum/$1 [L] RewriteCond %{REQUEST_FILENAME} !-s [NC] RewriteCond %{REQUEST_FILENAME} !-d [NC] RewriteRule ^(.+) index.php/$1 [L] That works only if I add Redirect directive: RewriteRule (.*) http://example.com/forum/$1 [R,L] But it changes previous address in address bar. EDIT: Ok, let's make it simple. I added those two lines at the end of the c:\windows\system32\drivers\etc\hosts on my local computer: 127.0.0.3 foo.net 127.0.0.3 forum.foo.net Now, I created two virtual hosts: <VirtualHost foo.net:80> ServerAdmin [email protected] ServerName foo.net DocumentRoot "C:/usr/src/foo" </VirtualHost> <VirtualHost forum.foo.net:80> ServerAdmin [email protected] ServerName forum.foo.net DocumentRoot "C:/usr/src/foo" </VirtualHost> ..and directory called "foo", where i put two files: .htaccess and index.php. Index.php: <?php echo $_SERVER['PATH_INFO']; ?> .htaccess: Options +FollowSymlinks RewriteEngine on RewriteBase / RewriteCond %{HTTP_HOST} ^forum\.foo\.net$ RewriteCond %{REQUEST_URI} !^/forum/ RewriteCond %{REQUEST_FILENAME} !-s [NC] RewriteCond %{REQUEST_FILENAME} !-d [NC] RewriteRule ^(.+)$ /index.php/forum/$1 [L] RewriteCond %{HTTP_HOST} !^forum\.foo\.net$ RewriteCond %{REQUEST_FILENAME} !-s [NC] RewriteCond %{REQUEST_FILENAME} !-d [NC] RewriteRule ^(.+) index.php/$1 [L] When I type address http://forum.foo.net/test in address bar, it displays /forum/test which is good. http://foo.net/a/b/c shows /a/b/c which is good. But! http://forum.foo.net/ displays empty value (should display /forum).

  Read the article

• nginx + wordpress in /wordpress subdir

  - by nkr1pt

  I installed nginx and would like to setup wordpress as a final step. I followed many howtos but am unable to get it working. The setup is fairly straightforward, the root dir of the webserver is /data/Sites/nkr1pt.homelinux.net. In that root dir I created a symlink to the wordpress folder in /usr/local/wordpress, so in fact all wordpress files can be accessed at /data/Sites/nkr1pt.homelinux.net/wordpress. Permissions are ok. The plan is to get wordpress working at http://sirius/wordpress, the server's name is sirius. spawn-fcgi is running and listening on port 7777. Here you can see the relevant config: server { listen 80; listen 8080; server_name sirius; root /data/Sites/nkr1pt.homelinux.net; passenger_enabled on; passenger_base_uri /redmine; #charset koi8-r; #access_log logs/access.log main; location ^~ /data { root /data/Sites/nkr1pt.homelinux.net; autoindex on; auth_basic "Restricted"; auth_basic_user_file htpasswd; } location ^~ /dump { root /data/Sites/nkr1pt.homelinux.net; autoindex on; } location ^~ /wordpress { try_files $uri $uri/ /wordpress/index.php; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:7777 location ~ \.php$ { #fastcgi_split_path_info ^(/wordpress)(/.*)$; fastcgi_pass localhost:7777; #fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; #index index.php; } please note that redmine, and the locations dump and data are working perfectly, it is only wordpress that I cannot get to work. Can you please help me to the correct wordpress configuration in nginx? All help is much appreciated!

  Read the article

• RPM Spec How to specify in package so that previous RPM is removed

  - by user123819

  Question: What do I put in the foo.spec file so that the rpm's will remove the previous rpm before installing? Description: I have created a spec file that creates rpm's for a few packages that use the same source and provide the same service, each with a slightly different configuration. E.g. they each provide the same "capability" Here's an example of the essentials that my .spec file looks like: %define version 1234 %define name foo %define release 1 %define pkgname %{name}-%{version}-%{release} Name: %{name} Version: %{version} Release: %{release} Provides: %{name} %package one Summary: Summary for foo-one Group: %{group} Obsoletes: %{name} <= %{version} Provides: %{name} = %{version} %description one Blah blah blah %package two Summary: Summary for foo-two Group: %{group} Obsoletes: %{name} <= %{version} Provides: %{name} = %{version} %description two Blah blah blah # %prep, %install, %build and %clean are pretty simple # and omitted here for brevity sake %files one %defattr(-,root,root,-) %{_prefix}/%{pkgname} %files two %defattr(-,root,root,-) %{_prefix}/%{pkgname} When I install the first one, it installs ok. I then remove the first one, and then install the second one, that works fine too. I then install the first one, followed immediately by installing the second one, and they both install, one over the other, but, I was expecting that the second one would be removed before installing the second. Example session: # rpmbuild foo and copy rpms to yum repo $ yum install foo-one ... $ yum list installed|grep foo foo-one.noarch 1234-1 @myrepo $ yum install foo-two ...[Should say that it is removing foo-one, but does not]... $ yum list installed|grep foo foo-one.noarch 1234-1 @myrepo foo-two.noarch 1234-1 @myrepo $ rpm -q --provides foo-one foo = 1234 foo-one = 1234-1 $ rpm -q --provides foo-two foo = 1234 foo-two = 1234-1 What do I put in the foo.spec file so that the rpm's will remove the previous rpm before installing? Thank you, .dave.

  Read the article

• Add Network Printer drivers in Windows 7/Server 2008 R2?

  - by Matias Nino

  I'm running a 64 bit Windows 7 / Windows 2008 R2 workstation that I just installed. I need to add a printer that is shared on the network from a 32bit Windows 2000 print server. This is an HP LaserJet 5Si printer, the drivers for which HP tells me are automatically built into Windows 7/R2. However, whenever I connect to the printer or try to add it, I get the following screen: Upon clicking OK, I get this screen asking me to locate the driver: How can I possibly locate a driver that is SUPPOSED TO BE NATIVELY SUPPORTED on Windows 7/R2? The tough part is that this printer is one of many shared on a server and does not have a direct IP address. Even worse: I have no access to the print server so I cannot put the 64 bit drivers on there. Any ideas? UPDATE: HP doesn't make a Vista driver either. It claims it is natively supported by Vista and 7, which is true because I am able to create a local printer on a fake tcp/ip port and Windows lets me pick the proper driver. However, when adding from the network, Windows does not let me select a driver and demands an INF. I tried searching the entire sub-structure of the C:\Windows directory and could not find any INF files that contain HP information. The INF might be located somewhere in the Windows installation DVD, but all the files on the DVD are compressed and unrecognizable. UPDATE #2 I installed the proper printer driver as a local printer (with no printer attached) and it installed. However, this did not change the fact that it STILL asks me to provide drivers when connecting to the networked printer.

  Read the article

< Previous Page | 793 794 795 796 797 798 799 800 801 802 803 804  | Next Page >